Cisco Unified Communications System for IP Telephony Release 9.0(1)

Install and Configure System Components
  Home   History
Implement TOC
Install and Configure System Components
Introduction to Troubleshooting

Install and Configure System Components

When implementing a Cisco Unified Communications system, create a site-specific plan for your team. Describe what needs to be installed and configured. Your plan should list the referenced product-specific installation guides in Table 1.

Your plan will help you manage timelines for implementing equipment and scheduling outages. Include an installation schedule, as well as a test plan that will verify that the operation conforms to the design objectives.

Preparing for Your System Installation provides guidance for the installation order of components for Cisco Unified Communications System for IP Telephony Release 9.0(1) deployment. It does not describe installation procedures for individual components. For links to the complete documentation set for each system component, see the Component Resources Documentation for IP Telephony topic on the Resource Library tab.