Cisco Unified Communications System for IP Telephony Release 6.1(1)

Install and Configure System Components
   Home    History
Implement TOC
Install and Configure System Components
Introduction to Troubleshooting

Install and Configure System Components

Download PDF
Download Site_Content_PDF
give_us_feedback

When implementing a new Cisco Unified Communications system, create a site-specific plan for your team. Describe what needs to be installed and configured. Your plan should list the referenced product-specific installation guides in Table 1. Table 2 contains products that were tested in this release and listed by technology with examples and links to configuration documents.

Your plan will help you manage timelines for implementing equipment and scheduling outages. Include an installation schedule, as well as a test plan that will verify that the operation conforms to the design objectives.

Performing Your System Installation provides guidance for the installation order of components for a Cisco Unified Communications System IPT deployment. It does not describe installation procedures for individual components. For links to the complete documentation set for each IPT system component, see the Component Resources topic on the Resource Library tab.