Cisco Unified Communications System for Contact Center Release 8.5(1)

Introduction to Design

Introduction to Design

Download PDF
Download Site_Content_PDF
give_us_feedback

Using the project plan that was developed in the Plan phase, your team should have enough information to develop a detailed design for each site and the entire network. The network design should contain, at a minimum:

Routing and switching component connectivity

WAN connectivity intra- and inter-sites

Software applications and configurations for routers and switches

Power and environment

Security

Redundancy and failover

Disaster recovery

For each site, in addition to the above, your design should include telephone circuitry, equipment racks with cabinet locations, and layouts. Each site should have a design that encompasses your network call processing, conferencing, and messaging requirements. The design should be scalable for future growth.

For specific deployment steps, see Deployment Methodology Opens new window in the Cisco Unified Communications System Description.


Tip You can navigate to any topic on this tab by using the tab navigation pane at the left of the content pane. This navigation pane contains the table of contents (TOC) for the active tab.


Before You Begin

Review information about the Cisco Validated Design Program Opens new window. Cisco Validated Designs consist of systems and solutions that are designed, tested, and documented to facilitate and improve customer deployments.

Review Solution Reference Network Design (SRND) documents and design tools. Gather requirements and data, which can include:

Business and system requirements

Service-level agreements (SLAs)

Capacity (bandwidth) requirements

Site survey and proposal from the project plan

When You Are Done

The main deliverable of the Design phase is the detailed design, including:

Deployment models that you can use at your site (see Review Tested Deployment Models)

Network diagrams (see Network Topology Diagrams in the Resource Library for editable Microsoft Visio network drawings)

Routing strategy

Redundancy

Call flows

Traffic flows

Equipment list

Bill of materials

Major Concepts and Tasks in This Process

Design Concepts

Design Tasks