配置IPSec路由器到路由器的Hub and Spoke网，并支持Spoke之间的通信

下载选项

  • PDF     (317.2 KB)
    在各种设备上使用 Adobe Reader 查看
  • ePub     (104.0 KB)
    在 iPhone、iPad、Android、Sony Reader 或 Windows Phone 上使用各种应用查看
  • Mobi (Kindle)     (138.1 KB)
    在 Kindle 设备上查看或在多个设备上使用 Kindle 应用查看
已更新: 2007 年 1 月 18 日
文档 ID:7912

非歧视性语言

此产品的文档集力求使用非歧视性语言。在本文档集中，非歧视性语言是指不隐含针对年龄、残障、性别、种族身份、族群身份、性取向、社会经济地位和交叉性的歧视的语言。由于产品软件的用户界面中使用的硬编码语言、基于 RFP 文档使用的语言或引用的第三方产品使用的语言，文档中可能无法确保完全使用非歧视性语言。 深入了解思科如何使用包容性语言。

关于此翻译

思科采用人工翻译与机器翻译相结合的方式将此文档翻译成不同语言，希望全球的用户都能通过各自的语言得到支持性的内容。 请注意：即使是最好的机器翻译，其准确度也不及专业翻译人员的水平。 Cisco Systems, Inc. 对于翻译的准确性不承担任何责任，并建议您总是参考英文原始文档（已提供链接）。

简介

此配置示例显示了三个路由器之间的星型 IPSec 设计。此配置与其他星型配置不同，因为在本示例中，各分支站点之间通过中心路由器实现通信。换句话说，两个分支路由器之间没有直接的 IPSec 隧道。所有数据包都通过隧道发送到中心路由器，并在中心路由器中与另一个分支路由器共享的 IPSec 隧道外部对其进行重新分配。由于对 Cisco Bug ID CSCdp09904（仅限注册用户）进行了解析，所以可以使用此配置。 此修补程序已集成到 Cisco IOS® 软件版本 12.2(5) 中，若要使用此配置，此版本为最低要求。

若要通过 OSPF 配置基于 IPSec 的通用路由封装 (GRE) 隧道，请参阅通过 OSPF 配置基于 IPSec 的 GRE 隧道。

要在带网络地址转换(NAT)的GRE隧道上配置基本的Cisco IOS®防火墙配置，请参阅在带IOS防火墙和NAT的GRE隧道上配置路由器到路由器IPSec（预共享密钥）。

先决条件

要求

本文档需要对 IPSec 协议拥有基本的了解。要了解 IPSec 的详细信息，请参阅 IP 安全 (IPSec) 加密简介。

本文的目的是确保完成下列路由器之间的加密操作：

  • 172.16.1.0/24 (Spoke 1) 与 10.1.1.0/24（中心路由器）

  • 192.168.1.0/24 (Spoke 2) 与 10.1.1.0/24（中心路由器）

  • 172.16.1.0/24 (Spoke 1) 与 192.168.1.0/24 (Spoke 2)

使用的组件

本文档中的信息基于以下软件和硬件版本。

  • Cisco IOS 软件版本 12.2(24a) (c2500-ik8s-l.122-24a.bin)

  • Cisco 2500 路由器

本文档中的信息都是基于特定实验室环境中的设备编写的。本文档中使用的所有设备最初均采用原始（默认）配置。如果您使用的是真实网络，请确保您已经了解所有命令的潜在影响。

规则

有关文档规则的详细信息，请参阅 Cisco 技术提示规则。

配置

本部分提供有关如何配置本文档所述功能的信息。

注意：使用命令查找工具(仅限注册客户)可查找有关本文档中使用的命令的详细信息。

网络图

本文档使用此图所示的网络设置。

VPNL2L.gif

注意：此配置中使用的IP编址方案在Internet上不可合法路由。这些地址是在实验室环境中使用的 RFC 1918 地址。 leavingcisco.com

配置

本文档使用以下配置。

show running-config 命令显示路由器上正在运行的配置。

中心路由器 
Hub#show running-config
Building configuration...
Current configuration : 1466 bytes
!
version 12.2

service timestamps debug datetime msec
service timestamps log uptime
no service password-encryption
!
hostname Hub
!


!
ip subnet-zero
!

!

!--- Configuration for IKE policies.

crypto isakmp policy 10

!--- Enables the IKE policy configuration (config-isakmp) !--- command mode, where you can specify the parameters that !--- are used during an IKE negotiation.

hash md5
authentication pre-share
crypto isakmp key cisco123 address 10.1.2.1
crypto isakmp key cisco123 address 10.1.3.1

!--- Specifies the preshared key "cisco123" which should !--- be identical at both peers. This is a global !--- configuration mode command.

 
!

!--- Configuration for IPsec policies.

crypto ipsec transform-set myset esp-des esp-md5-hmac 

!--- Enables the crypto transform configuration mode, !--- where you can specify the transform sets that are used !--- during an IPsec negotiation. 

!
crypto map mymap 10 ipsec-isakmp 

!--- Indicates that IKE is used to establish !--- the IPsec security association for protecting the !--- traffic specified by this crypto map entry.

set peer 10.1.2.1

!--- Sets the IP address of the remote end.

set transform-set myset 

!--- Configures IPsec to use the transform-set !--- "myset" defined earlier in this configuration.

match address 110

!--- Specifies the traffic to be encrypted.

crypto map mymap 20 ipsec-isakmp 
set peer 10.1.3.1
set transform-set myset 
match address 120
!
!
!
!
interface Ethernet0
ip address 10.1.1.1 255.255.255.0
!
interface Ethernet1
ip address 10.1.4.1 255.255.255.0
no ip route-cache

!--- You must enable process switching for IPsec !--- to encrypt outgoing packets. This command disables fast switching.

no ip mroute-cache
crypto map mymap

!--- Configures the interface to use the !--- crypto map "mymap" for IPsec.

!


!--- Output suppressed.

ip classless
ip route 172.16.1.0 255.255.255.0 Ethernet1
ip route 192.168.1.0 255.255.255.0 Ethernet1
ip route 10.1.0.0 255.255.0.0 Ethernet1
ip http server

!
access-list 110 permit ip 10.1.1.0 0.0.0.255 172.16.1.0 0.0.0.255
access-list 110 permit ip 192.168.1.0 0.0.0.255 172.16.1.0 0.0.0.255
access-list 120 permit ip 10.1.1.0 0.0.0.255 192.168.1.0 0.0.0.255
access-list 120 permit ip 172.16.1.0 0.0.0.255 192.168.1.0 0.0.0.255

!--- This crypto ACL-permit identifies the !--- matching traffic flows to be protected via encryption.

Spoke 1 路由器 
Spoke1#show running-config
Building configuration...
Current configuration : 1203 bytes
!
version 12.2

service timestamps debug datetime msec
service timestamps log uptime
no service password-encryption
!
hostname Spoke1
!
enable secret 5 $1$DOX3$rIrxEnTVTw/7LNbxi.akz0

!
ip subnet-zero
no ip domain-lookup
!

!
crypto isakmp policy 10
hash md5
authentication pre-share
crypto isakmp key cisco123 address 10.1.4.1
! 
!
crypto ipsec transform-set myset esp-des esp-md5-hmac 
!
crypto map mymap 10 ipsec-isakmp 
set peer 10.1.4.1
set transform-set myset 
match address 110
!
!
!
!
interface Ethernet0
ip address 172.16.1.1 255.255.255.0
!
interface Ethernet1
ip address 10.1.2.1 255.255.255.0
no ip route-cache
no ip mroute-cache
crypto map mymap
!

.
.

!--- Output suppressed.

.
.
ip classless

ip route 192.168.1.0 255.255.255.0 Ethernet1
ip route 10.1.0.0 255.255.0.0 Ethernet1
no ip http server

!
access-list 110 permit ip 172.16.1.0 0.0.0.255 10.1.1.0 0.0.0.255
access-list 110 permit ip 172.16.1.0 0.0.0.255 192.168.1.0 0.0.0.255
!

end
2509a#

Spoke 2 路由器 
Spoke2#show running-config
Building configuration...
Current configuration : 1117 bytes
!
version 12.2

service timestamps debug datetime msec
service timestamps log uptime
service password-encryption
!
hostname Spoke2
!

!
ip subnet-zero
no ip domain-lookup
!

!
crypto isakmp policy 10
hash md5
authentication pre-share
crypto isakmp key cisco123 address 10.1.4.1
!
! 
crypto ipsec transform-set myset esp-des esp-md5-hmac 
!
crypto map mymap 10 ipsec-isakmp 
set peer 10.1.4.1
set transform-set myset 
match address 120
!
!
!
!
interface Ethernet0
ip address 192.168.1.1 255.255.255.0
!
interface Ethernet1
ip address 10.1.3.1 255.255.255.0

!--- No ip route-cache.

no ip mroute-cache
crypto map mymap
!

.
.

!--- Output suppressed.

.
.
ip classless

ip route 172.16.0.0 255.255.0.0 Ethernet1
ip route 10.1.0.0 255.255.0.0 Ethernet1
no ip http server

!
access-list 120 permit ip 192.168.1.0 0.0.0.255 172.16.1.0 0.0.0.255
access-list 120 permit ip 192.168.1.0 0.0.0.255 10.1.1.0 0.0.0.255
!

end
VPN2509#

添加另一分支

如果除了spoke1和spoke2之外，您还需要向现有中心路由器添加另一个分支路由器(spoke3)，则只需创建从中心到spoke3的新LAN到LAN(L2L)隧道。但是，由于每个物理接口只能配置一个加密映射，因此在添加此隧道时必须使用相同的加密映射名称。当您为各远程站点使用不同线路编号时，可实现这一操作。

注意：添加新隧道条目时，可能需要删除加密映射并将其重新应用到接口。若删除此加密映射，则可清除所有活动隧道。

中心路由器 
Hub#show running-config
Building configuration...
Current configuration : 1466 bytes
!
version 12.2

service timestamps debug datetime msec
service timestamps log uptime
no service password-encryption
!
hostname Hub
!


!
ip subnet-zero
!

!
crypto isakmp policy 10

hash md5
authentication pre-share
crypto isakmp key cisco123 address 10.1.2.1
crypto isakmp key cisco123 address 10.1.3.1
crypto isakmp key cisco123 address 10.1.5.1
!

crypto ipsec transform-set myset esp-des esp-md5-hmac 
!
crypto map mymap 10 ipsec-isakmp 
set peer 10.1.2.1
set transform-set myset
match address 110

crypto map mymap 20 ipsec-isakmp 
set peer 10.1.3.1
set transform-set myset 
match address 120


!--- It is important to specify crypto map line number 30 for !--- the Spoke 3 router with the same crypto map name "mymap" 

crypto map mymap 30 ipsec-isakmp 
set peer 10.1.5.1
set transform-set myset 
match address 130
!
!
!
!
interface Ethernet0
ip address 10.1.1.1 255.255.255.0
!
interface Ethernet1
ip address 10.1.4.1 255.255.255.0
no ip route-cache
no ip mroute-cache


!--- It is important to remove and re-apply the crypto !--- map to this interface if it is used for the termination of other !--- spoke VPN tunnels.


crypto map mymap
!


!--- Output suppressed.

ip classless
ip route 172.16.1.0 255.255.255.0 Ethernet1
ip route 192.168.1.0 255.255.255.0 Ethernet1
ip route 10.1.0.0 255.255.0.0 Ethernet1
ip route 172.16.2.0 255.255.255.0 Ethernet1
ip http server

!
access-list 110 permit ip 10.1.1.0 0.0.0.255 172.16.1.0 0.0.0.255
access-list 110 permit ip 192.168.1.0 0.0.0.255 172.16.1.0 0.0.0.255
access-list 110 permit ip 172.16.2.0 0.0.0.255 172.16.1.0 0.0.0.255
access-list 120 permit ip 10.1.1.0 0.0.0.255 192.168.1.0 0.0.0.255
access-list 120 permit ip 172.16.2.0 0.0.0.255 192.168.1.0 0.0.0.255
access-list 120 permit ip 172.16.1.0 0.0.0.255 192.168.1.0 0.0.0.255
access-list 130 permit ip 10.1.1.0 0.0.0.255 172.16.2.0 0.0.0.255
access-list 130 permit ip 192.168.1.0 0.0.0.255 172.16.2.0 0.0.0.255
access-list 130 permit ip 172.16.1.0 0.0.0.255 172.16.2.0 0.0.0.255

Spoke 3 路由器 
Spoke3#show running-config
Building configuration...
Current configuration : 1117 bytes
!
version 12.2

service timestamps debug datetime msec
service timestamps log uptime
service password-encryption
!
hostname Spoke3
!

!
ip subnet-zero
no ip domain-lookup
!

!
crypto isakmp policy 10
hash md5
authentication pre-share
crypto isakmp key cisco123 address 10.1.4.1
!
! 
crypto ipsec transform-set myset esp-des esp-md5-hmac 
!
crypto map mymap 10 ipsec-isakmp 
set peer 10.1.4.1
set transform-set myset 
match address 130
!
!
!
!
interface Ethernet0
ip address 172.16.2.1 255.255.255.0
!
interface Ethernet1
ip address 10.1.5.1 255.255.255.0
no ip mroute-cache
crypto map mymap
!

.
.

!--- Output suppressed.

.
.
ip classless

ip route 172.16.0.0 255.255.0.0 Ethernet1
ip route 10.1.0.0 255.255.0.0 Ethernet1
no ip http server

!
access-list 130 permit ip 172.168.2.0 0.0.0.255 172.16.1.0 0.0.0.255
access-list 130 permit ip 172.168.2.0 0.0.0.255 10.1.1.0 0.0.0.255
access-list 130 permit ip 172.168.2.0 0.0.0.255 192.168.1.0 0.0.0.255
!

end
VPN2509#

验证

使用本部分可确认配置能否正常运行。

命令输出解释程序（仅限注册用户）(OIT) 支持某些 show 命令。使用 OIT 可查看对 show 命令输出的分析。

要验证此配置，请尝试从Spoke 1上的ethernet1接口地址发出扩展ping命令，该地址的目的地址是Spoke 2中的ethernet1接口地址。

  • ping - 用于诊断基本网络连接。 

    Spoke1#ping
Protocol [ip]:
Target IP address: 192.168.1.1
Repeat count [5]:
Datagram size [100]:
Timeout in seconds [2]:
Extended commands [n]: y
Source address or interface: 172.16.1.1
Type of service [0]:
Set DF bit in IP header? [no]:
Validate reply data? [no]:
Data pattern [0xABCD]:
Loose, Strict, Record, Timestamp, Verbose[none]:
Sweep range of sizes [n]:
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.1.1, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 64/64/68 ms

  • show crypto ipsec sa - 显示当前 (IPSec) 安全关联 (SA) 所使用的设置。

  • show crypto isakmp sa - 显示对等体上的所有当前 IKE SA。

  • show crypto engine connections active - 显示通过各 IPSec SA 传送的数据包数量。

show 输出示例

此输出来自中心路由器上发出的 show crypto engine connections active 命令。 

Hub#show crypto engine connections active

ID Interface IP-Address State Algorithm Encrypt Decrypt
5 Ethernet0 10.1.4.1 set HMAC_MD5+DES_56_CB 0 0
6 <none> <none>  set HMAC_MD5+DES_56_CB 0 0
2000 Ethernet0 10.1.4.1 set HMAC_MD5+DES_56_CB 0 10
2001 Ethernet0 10.1.4.1 set HMAC_MD5+DES_56_CB 10 0
2002 Ethernet0 10.1.4.1 set HMAC_MD5+DES_56_CB 0 10
2003 Ethernet0 10.1.4.1 set HMAC_MD5+DES_56_CB 10 0

您可以从本例中了解到，每个隧道都拥有 10 个加密包和解密包，这 10 个加密包和解密包可以证明这些数据流经过中心路由器。

注意：为每个对等体（每个方向一个）创建两个IPsec SA。 例如，中心路由器中的两个对等体共拥有四个 IPSec SA。

故障排除

本部分提供的信息可用于对配置进行故障排除。

故障排除命令

注意：在使用debug命令之前，请参阅有关Debug命令的重要信息。

调试输出示例

这是来自 debug crypto ipsec 和 debug crypto isakmp 命令的中心路由器输出。 

*Mar  1 00:03:46.887: ISAKMP (0:0): received packet 
  from 10.1.2.1 (N) NEW SA
*Mar  1 00:03:46.887: ISAKMP: local port 500, remote port 500
*Mar  1 00:03:46.899: ISAKMP (0:1): processing SA payload. message ID = 0
*Mar  1 00:03:46.899: ISAKMP (0:1): found peer pre-shared key matching 10.1.2.1
*Mar  1 00:03:46.903: ISAKMP (0:1): Checking ISAKMP transform 1 against priority
 10 policy
*Mar  1 00:03:46.903: ISAKMP:      encryption DES-CBC
*Mar  1 00:03:46.907: ISAKMP:      hash MD5
*Mar  1 00:03:46.907: ISAKMP:      default group 1
*Mar  1 00:03:46.911: ISAKMP:      auth pre-share
*Mar  1 00:03:46.911: ISAKMP:      life type in seconds
*Mar  1 00:03:46.911: ISAKMP:      life duration (VPI) of  0x0 0x1 0x51 0x80
*Mar  1 00:03:46.915: ISAKMP (0:1): atts are acceptable. Next payload is 0

!--- The initial IKE parameters have been !--- successfully exchanged between Spoke 1 and Hub.

*Mar  1 00:03:48.367: ISAKMP (0:1): SA is doing pre-shared key 
authentication using id type ID_IPV4_ADDR
*Mar  1 00:03:48.371: ISAKMP (0:1): sending packet to 10.1.2.1 (R) MM_SA_SETUP
*Mar  1 00:03:56.895: ISAKMP (0:1): received packet from 10.1.2.1 (R) MM_SA_SETUP
*Mar  1 00:03:56.899: ISAKMP (0:1): phase 1 packet is a duplicate of a previous packet.
*Mar  1 00:03:56.899: ISAKMP (0:1): retransmitting due to retransmit phase 1
*Mar  1 00:03:56.903: ISAKMP (0:1): retransmitting phase 1 MM_SA_SETUP...
*Mar  1 00:03:57.403: ISAKMP (0:1): retransmitting phase 1 MM_SA_SETUP...
*Mar  1 00:03:57.403: ISAKMP (0:1): incrementing error counter on sa: 
retransmit phase 1
*Mar  1 00:03:57.407: ISAKMP (0:1): retransmitting phase 1 MM_SA_SETUP
*Mar  1 00:03:57.407: ISAKMP (0:1): sending packet to 10.1.2.1 (R) 
 MM_SA_SETUP
*Mar  1 00:03:58.923: ISAKMP (0:1): received packet from 10.1.2.1 
 (R) MM_SA_SET UP
*Mar  1 00:03:58.931: ISAKMP (0:1): processing KE payload. message ID = 0
*Mar  1 00:04:00.775: ISAKMP (0:1): processing NONCE payload. message ID = 0
*Mar  1 00:04:00.783: ISAKMP (0:1): found peer pre-shared key matching 10.1.2.1
*Mar  1 00:04:00.795: ISAKMP (0:1): SKEYID state generated
*Mar  1 00:04:00.799: ISAKMP (0:1): processing vendor id payload
*Mar  1 00:04:00.803: ISAKMP (0:1): speaking to another IOS box!
*Mar  1 00:04:00.811: ISAKMP (0:1): sending packet to 10.1.2.1 (R) MM_KEY_EXCH
*Mar  1 00:04:02.751: ISAKMP (0:1): received packet from 10.1.2.1 (R) MM_KEY_EXCH
*Mar  1 00:04:02.759: ISAKMP (0:1): processing ID payload. message ID = 0
*Mar  1 00:04:02.759: ISAKMP (0:1): processing HASH payload. message ID = 0
*Mar  1 00:04:02.767: ISAKMP (0:1): SA has been authenticated with 10.1.2.1
*Mar  1 00:04:02.771: ISAKMP (1): ID payload
        next-payload : 8
        type         : 1
        protocol     : 17
        port         : 500
        length       : 8
*Mar  1 00:04:02.775: ISAKMP (1): Total payload length: 12
*Mar  1 00:04:02.783: ISAKMP (0:1): sending packet to 10.1.2.1 (R) QM_IDLE

*Mar  1 00:04:02.871: ISAKMP (0:1): received packet from 10.1.2.1 
 (R) QM_IDLE

!--- IKE phase 1 SA has been sucessfully negotiated !--- between Spoke 1 and Hub.

*Mar  1 00:04:02.891: ISAKMP (0:1): processing HASH payload. message ID = 581713929
*Mar  1 00:04:02.891: ISAKMP (0:1): processing SA payload. message ID = 581713929
*Mar  1 00:04:02.895: ISAKMP (0:1): Checking IPSec proposal 1

!--- IKE exchanges IPsec phase 2 parameters !--- between Spoke 1 and Hub.

*Mar  1 00:04:02.895: ISAKMP: transform 1, ESP_DES
*Mar  1 00:04:02.899: ISAKMP:   attributes in transform:
*Mar  1 00:04:02.899: ISAKMP:      encaps is 1
*Mar  1 00:04:02.899: ISAKMP:      SA life type in seconds
*Mar  1 00:04:02.903: ISAKMP:      SA life duration (basic) of 3600
*Mar  1 00:04:02.903: ISAKMP:      SA life type in kilobytes
*Mar  1 00:04:02.907: ISAKMP:      SA life duration (VPI) of  0x0 0x46 0x50 0x0
*Mar  1 00:04:02.911: ISAKMP:      authenticator is HMAC-MD5
*Mar  1 00:04:02.915: ISAKMP (0:1): atts are acceptable.

!--- IPsec phase 2 parameters have been !--- successfully exchanged between Spoke 1 and Hub.

*Mar  1 00:04:02.915: IPSEC(validate_proposal_request): proposal part #1,
  (key eng. msg.) INBOUND local= 10.1.4.1, remote= 10.1.2.1,
    local_proxy= 192.168.1.0/255.255.255.0/0/0 (type=4),
    remote_proxy= 172.16.1.0/255.255.255.0/0/0 (type=4),
    protocol= ESP, transform= esp-des esp-md5-hmac ,
    lifedur= 0s and 0kb,
    spi= 0x0(0), conn_id= 0, keysize= 0, flags= 0x4
*Mar  1 00:04:02.931: ISAKMP (0:1): processing NONCE payload. message ID = 581713929
*Mar  1 00:04:02.935: ISAKMP (0:1): processing ID payload. message ID = 581713929
*Mar  1 00:04:02.935: ISAKMP (0:1): processing ID payload. message ID = 581713929
*Mar  1 00:04:02.939: ISAKMP (0:1): asking for 1 spis from ipsec
*Mar  1 00:04:02.943: IPSEC(key_engine): got a queue event...
*Mar  1 00:04:02.951: IPSEC(spi_response): getting spi 4208568169 for SA
        from 10.1.4.1       to 10.1.2.1       for prot 3
*Mar  1 00:04:02.955: ISAKMP: received ke message (2/1)
*Mar  1 00:04:03.207: ISAKMP (0:1): sending packet to 10.1.2.1 (R) QM_IDLE

*Mar  1 00:04:03.351: ISAKMP (0:1): received packet from 10.1.2.1 (R) QM_IDLE

*Mar  1 00:04:03.387: ISAKMP (0:1): Creating IPSec SAs
*Mar  1 00:04:03.387:         inbound SA from 10.1.2.1 to 10.1.4.1
        (proxy 172.16.1.0 to 192.168.1.0)
*Mar  1 00:04:03.391:         has spi 0xFAD9A769 and conn_id 2000 and flags 4
*Mar  1 00:04:03.395:         lifetime of 3600 seconds
*Mar  1 00:04:03.395:         lifetime of 4608000 kilobytes
*Mar  1 00:04:03.399:         outbound SA from 10.1.4.1       to 10.1.2.1
  (proxy 192.168.1.0     to 172.16.1.0     )
*Mar  1 00:04:03.403:         has spi -732960388 and conn_id 2001 and flags C
*Mar  1 00:04:03.407:         lifetime of 3600 seconds
*Mar  1 00:04:03.407:         lifetime of 4608000 kilobytes
*Mar  1 00:04:03.411: ISAKMP (0:1): deleting node 581713929 error FALSE reason "
quick mode done (await()"
*Mar  1 00:04:03.415: IPSEC(key_engine): got a queue event...
*Mar  1 00:04:03.415: IPSEC(initialize_sas): ,
  (key eng. msg.) INBOUND local= 10.1.4.1, remote= 10.1.2.1,
    local_proxy= 192.168.1.0/255.255.255.0/0/0 (type=4),
    remote_proxy= 172.16.1.0/255.255.255.0/0/0 (type=4),
    protocol= ESP, transform= esp-des esp-md5-hmac ,
    lifedur= 3600s and 4608000kb,
    spi= 0xFAD9A769(4208568169), conn_id= 2000, keysize= 0, flags= 0x4
*Mar  1 00:04:03.427: IPSEC(initialize_sas): ,
  (key eng. msg.) OUTBOUND local= 10.1.4.1, remote= 10.1.2.1,
    local_proxy= 192.168.1.0/255.255.255.0/0/0 (type=4),
    remote_proxy= 172.16.1.0/255.255.255.0/0/0 (type=4),
    protocol= ESP, transform= esp-des esp-md5-hmac ,
    lifedur= 3600s and 4608000kb,
    spi= 0xD44FE97C(3562006908), conn_id= 2001, keysize= 0, flags= 0xC
*Mar  1 00:04:03.443: IPSEC(create_sa): sa created,
  (sa) sa_dest= 10.1.4.1, sa_prot= 50,
    sa_spi= 0xFAD9A769(4208568169),
    sa_trans= esp-des esp-md5-hmac , sa_conn_id= 2000
*Mar  1 00:04:03.447: IPSEC(create_sa): sa created,
  (sa) sa_dest= 10.1.2.1, sa_prot= 50,
    sa_spi= 0xD44FE97C(3562006908),
    sa_trans= esp-des esp-md5-hmac , sa_conn_id= 2001

!--- IPsec tunnel has been created between !--- routers Spoke 1 and Hub.

*Mar  1 00:05:02.387: IPSEC(sa_request): ,

!--- Since an IPsec tunnel is created between Spoke 1 !--- and Spoke 2 through the Hub, the Hub router !--- initializes a new IPsec tunnel between itself and Spoke 2.

  (key eng. msg.) OUTBOUND local= 10.1.4.1, remote= 10.1.3.1,
    local_proxy= 172.16.1.0/255.255.255.0/0/0 (type=4),
    remote_proxy= 192.168.1.0/255.255.255.0/0/0 (type=4),
    protocol= ESP, transform= esp-des esp-md5-hmac ,
    lifedur= 3600s and 4608000kb,
    spi= 0x1B7A414E(460996942), conn_id= 0, keysize= 0, flags= 0x400C
*Mar  1 00:05:02.399: ISAKMP: received ke message (1/1)
*Mar  1 00:05:02.403: ISAKMP: local port 500, remote port 500
*Mar  1 00:05:02.411: ISAKMP (0:2): beginning Main Mode exchange
*Mar  1 00:05:02.415: ISAKMP (0:2): sending packet to 10.1.3.1 
 (I) MM_NO_STATE
*Mar  1 00:05:12.419: ISAKMP (0:2): retransmitting phase 1 MM_NO_STATE...
*Mar  1 00:05:12.419: ISAKMP (0:2): incrementing error counter 
 on sa: retransmit phase 1
*Mar  1 00:05:12.423: ISAKMP (0:2): retransmitting phase 1 MM_NO_STATE
*Mar  1 00:05:12.423: ISAKMP (0:2): sending packet to 10.1.3.1 (I) 
 MM_NO_STATE
*Mar  1 00:05:22.427: ISAKMP (0:2): retransmitting phase 1 MM_NO_STATE...
*Mar  1 00:05:22.427: ISAKMP (0:2): incrementing error counter on sa: 
 retransmit phase 1
*Mar  1 00:05:22.431: ISAKMP (0:2): retransmitting phase 1 MM_NO_STATE
*Mar  1 00:05:22.431: ISAKMP (0:2): sending packet to 10.1.3.1 (I) 
 MM_NO_STATE
*Mar  1 00:05:22.967: ISAKMP (0:2): received packet from 10.1.3.1 
 (I) MM_NO_STATE
*Mar  1 00:05:22.975: ISAKMP (0:2): processing SA payload. message ID = 0
*Mar  1 00:05:22.975: ISAKMP (0:2): found peer pre-shared key 
 matching 10.1.3.1
*Mar  1 00:05:22.979: ISAKMP (0:2): Checking ISAKMP transform 1 
 against priority 10 policy
*Mar  1 00:05:22.979: ISAKMP:      encryption DES-CBC
*Mar  1 00:05:22.983: ISAKMP:      hash MD5
*Mar  1 00:05:22.983: ISAKMP:      default group 1
*Mar  1 00:05:22.987: ISAKMP:      auth pre-share
*Mar  1 00:05:22.987: ISAKMP:      life type in seconds
*Mar  1 00:05:22.987: ISAKMP:      life duration (VPI) of  0x0 0x1 0x51 0x80
*Mar  1 00:05:22.991: ISAKMP (0:2): atts are acceptable. 
 Next payload is 0

!--- IKE phase 1 parameters have been successfully !--- exchanged between Hub and Spoke 2.

*Mar  1 00:05:24.447: ISAKMP (0:2): SA is doing pre-shared key 
 authentication using id type ID_IPV4_ADDR
*Mar  1 00:05:24.455: ISAKMP (0:2): sending packet to 10.1.3.1 
 (I) MM_SA_SETUP
*Mar  1 00:05:26.463: ISAKMP (0:2): received packet from 10.1.3.1 
 (I) MM_SA_SETUP
*Mar  1 00:05:26.471: ISAKMP (0:2): processing KE payload. message ID = 0
*Mar  1 00:05:28.303: ISAKMP (0:2): processing NONCE payload. message ID = 0
*Mar  1 00:05:28.307: ISAKMP (0:2): found peer pre-shared key matching 10.1.3.1
*Mar  1 00:05:28.319: ISAKMP (0:2): SKEYID state generated
*Mar  1 00:05:28.323: ISAKMP (0:2): processing vendor id payload
*Mar  1 00:05:28.327: ISAKMP (0:2): speaking to another IOS box!
*Mar  1 00:05:28.331: ISAKMP (2): ID payload
        next-payload : 8
        type         : 1
        protocol     : 17
        port         : 500
        length       : 8
*Mar  1 00:05:28.335: ISAKMP (2): Total payload length: 12
*Mar  1 00:05:28.343: ISAKMP (0:2): sending packet to 10.1.3.1 (I) 
 MM_KEY_EXCH
*Mar  1 00:05:28.399: ISAKMP (0:2): received packet from 10.1.3.1 (I) 
 MM_KEY_EXCH
*Mar  1 00:05:28.407: ISAKMP (0:2): processing ID payload. message ID = 0
*Mar  1 00:05:28.411: ISAKMP (0:2): processing HASH payload. message ID = 0
*Mar  1 00:05:28.419: ISAKMP (0:2): SA has been authenticated with 10.1.3.1
*Mar  1 00:05:28.419: ISAKMP (0:2): beginning Quick Mode exchange, 
 M-ID of -1872859789
*Mar  1 00:05:28.439: ISAKMP (0:2): sending packet to 10.1.3.1 (I) QM_IDLE

*Mar  1 00:05:28.799: ISAKMP (0:2): received packet from 10.1.3.1 
(I) QM_IDLE

!--- The IKE phase 1 SA has been successfully !--- negotiated between Hub and Spoke 2.

*Mar  1 00:05:28.815: ISAKMP (0:2): processing HASH payload. 
 message ID = -1872859789
*Mar  1 00:05:28.815: ISAKMP (0:2): processing SA payload. 
 message ID = -1872859789
*Mar  1 00:05:28.819: ISAKMP (0:2): Checking IPSec proposal 1

!--- IKE exchanges IPsec phase 2 parameters !--- between Hub and Spoke 2.

*Mar  1 00:05:28.819: ISAKMP: transform 1, ESP_DES
*Mar  1 00:05:28.823: ISAKMP:   attributes in transform:
*Mar  1 00:05:28.823: ISAKMP:      encaps is 1
*Mar  1 00:05:28.827: ISAKMP:      SA life type in seconds
*Mar  1 00:05:28.827: ISAKMP:      SA life duration (basic) of 3600
*Mar  1 00:05:28.827: ISAKMP:      SA life type in kilobytes
*Mar  1 00:05:28.831: ISAKMP:      SA life duration (VPI) of  0x0 0x46 0x50 0x0
*Mar  1 00:05:28.835: ISAKMP:      authenticator is HMAC-MD5
*Mar  1 00:05:28.839: ISAKMP (0:2): atts are acceptable.

!--- IPsec phase 2 parameters have been successfully !--- exchanged between Hub and Spoke 2.

*Mar  1 00:05:28.843: IPSEC(validate_proposal_request): proposal part #1,
  (key eng. msg.) INBOUND local= 10.1.4.1, remote= 10.1.3.1,
    local_proxy= 172.16.1.0/255.255.255.0/0/0 (type=4),
    remote_proxy= 192.168.1.0/255.255.255.0/0/0 (type=4),
    protocol= ESP, transform= esp-des esp-md5-hmac ,
    lifedur= 0s and 0kb,
    spi= 0x0(0), conn_id= 0, keysize= 0, flags= 0x4
*Mar  1 00:05:28.855: ISAKMP (0:2): processing NONCE payload. 
 message ID = -1872859789
*Mar  1 00:05:28.859: ISAKMP (0:2): processing ID payload. 
 message ID = -1872859789
*Mar  1 00:05:28.863: ISAKMP (0:2): processing ID payload. 
 message ID = -1872859789
*Mar  1 00:05:28.891: ISAKMP (0:2): Creating IPSec SAs
*Mar  1 00:05:28.891:         inbound SA from 10.1.3.1 to 10.1.4.1
        (proxy 192.168.1.0 to 172.16.1.0)
*Mar  1 00:05:28.895:         has spi 0x1B7A414E and conn_id 2002 and flags 4
*Mar  1 00:05:28.899:         lifetime of 3600 seconds
*Mar  1 00:05:28.899:         lifetime of 4608000 kilobytes
*Mar  1 00:05:28.903:         outbound SA from 10.1.4.1       to 10.1.3.1
  (proxy 172.16.1.0      to 192.168.1.0    )
*Mar  1 00:05:28.907:         has spi -385025107 and conn_id 2003 and flags C
*Mar  1 00:05:28.911:         lifetime of 3600 seconds
*Mar  1 00:05:28.911:         lifetime of 4608000 kilobytes
*Mar  1 00:05:28.915: ISAKMP (0:2): sending packet to 10.1.3.1 (I) QM_IDLE

*Mar  1 00:05:28.919: ISAKMP (0:2): deleting node -1872859789 error FALSE reason
 ""
*Mar  1 00:05:28.923: IPSEC(key_engine): got a queue event...
*Mar  1 00:05:28.927: IPSEC(initialize_sas): ,
  (key eng. msg.) INBOUND local= 10.1.4.1, remote= 10.1.3.1,
    local_proxy= 172.16.1.0/255.255.255.0/0/0 (type=4),
    remote_proxy= 192.168.1.0/255.255.255.0/0/0 (type=4),
    protocol= ESP, transform= esp-des esp-md5-hmac ,
    lifedur= 3600s and 4608000kb,
    spi= 0x1B7A414E(460996942), conn_id= 2002, keysize= 0, flags= 0x4
*Mar  1 00:05:28.939: IPSEC(initialize_sas): ,
  (key eng. msg.) OUTBOUND local= 10.1.4.1, remote= 10.1.3.1,
    local_proxy= 172.16.1.0/255.255.255.0/0/0 (type=4),
    remote_proxy= 192.168.1.0/255.255.255.0/0/0 (type=4),
    protocol= ESP, transform= esp-des esp-md5-hmac ,
    lifedur= 3600s and 4608000kb,
    spi= 0xE90CFBAD(3909942189), conn_id= 2003, keysize= 0, flags= 0xC
*Mar  1 00:05:28.951: IPSEC(create_sa): sa created,
  (sa) sa_dest= 10.1.4.1, sa_prot= 50,
    sa_spi= 0x1B7A414E(460996942),
    sa_trans= esp-des esp-md5-hmac , sa_conn_id= 2002
*Mar  1 00:05:28.959: IPSEC(create_sa): sa created,
  (sa) sa_dest= 10.1.3.1, sa_prot= 50,
    sa_spi= 0xE90CFBAD(3909942189),
    sa_trans= esp-des esp-md5-hmac , sa_conn_id= 2003

!--- IPsec tunnel has been created between routers !--- Hub and Spoke 2. This establishes a tunnel between Spoke 1 !--- and Spoke 2 through Hub.

这是来自 debug crypto isakmp 和 debug crypto ipsec 命令的 Spoke 1 路由器输出。 

*Mar  1 00:03:28.771: IPSEC(sa_request): ,
  (key eng. msg.) OUTBOUND local= 10.1.2.1, remote= 10.1.4.1,
    local_proxy= 172.16.1.0/255.255.255.0/0/0 (type=4),
    remote_proxy= 192.168.1.0/255.255.255.0/0/0 (type=4),
    protocol= ESP, transform= esp-des esp-md5-hmac ,
    lifedur= 3600s and 4608000kb,
    spi= 0xD44FE97C(3562006908), conn_id= 0, keysize= 0, flags= 0x400C

!--- Request sent after the ping.

*Mar  1 00:03:28.787: ISAKMP: received ke message (1/1)
*Mar  1 00:03:28.791: ISAKMP: local port 500, remote port 500
*Mar  1 00:03:28.799: ISAKMP (0:1): beginning Main Mode exchange

!--- Initial IKE phase 1 parameters are exchanged !--- between Spoke 1 and Hub.

*Mar  1 00:03:28.803: ISAKMP (0:1): sending packet to 10.1.4.1 
 (I) MM_NO_STATE.
*Mar  1 00:03:38.807: ISAKMP (0:1): retransmitting phase 1 MM_NO_STATE...
*Mar  1 00:03:38.807: ISAKMP (0:1): incrementing error counter 
 on sa: retransmit phase 1
*Mar  1 00:03:38.811: ISAKMP (0:1): retransmitting phase 1 MM_NO_STATE
*Mar  1 00:03:38.811: ISAKMP (0:1): sending packet to 10.1.4.1 
 (I) MM_NO_STATE
*Mar  1 00:03:48.815: ISAKMP (0:1): retransmitting phase 1 MM_NO_STATE...
*Mar  1 00:03:48.815: ISAKMP (0:1): incrementing error counter on 
 sa: retransmit phase 1
*Mar  1 00:03:48.819: ISAKMP (0:1): retransmitting phase 1 MM_NO_STATE
*Mar  1 00:03:48.819: ISAKMP (0:1): sending packet to 10.1.4.1 (I) MM_NO_STATE
*Mar  1 00:03:49.355: ISAKMP (0:1): received packet from 10.1.4.1 
 (I) MM_NO_STATE
*Mar  1 00:03:49.363: ISAKMP (0:1): processing SA payload. message ID = 0
*Mar  1 00:03:49.363: ISAKMP (0:1): found peer pre-shared key matching 
 10.1.4.1
*Mar  1 00:03:49.367: ISAKMP (0:1): Checking ISAKMP transform 1 against 
 priority 10 policy
*Mar  1 00:03:49.367: ISAKMP:      encryption DES-CBC
*Mar  1 00:03:49.371: ISAKMP:      hash MD5
*Mar  1 00:03:49.371: ISAKMP:      default group 1
*Mar  1 00:03:49.375: ISAKMP:      auth pre-share
*Mar  1 00:03:49.375: ISAKMP:      life type in seconds
*Mar  1 00:03:49.375: ISAKMP:      life duration (VPI) of  0x0 0x1 0x51 0x80
*Mar  1 00:03:49.379: ISAKMP (0:1): atts are acceptable. 
 Next payload is 0

!--- IKE phase 1 parameters have been sucessfully !--- negotiated between Spoke 1 and Hub.

*Mar  1 00:03:50.835: ISAKMP (0:1): SA is doing pre-shared key 
 authentication using id type ID_IPV4_ADDR
*Mar  1 00:03:50.851: ISAKMP (0:1): sending packet to 10.1.4.1 
 (I) MM_SA_SETUP
*Mar  1 00:03:52.759: ISAKMP (0:1): received packet from 10.1.4.1 
 (I) MM_SA_SETUP
*Mar  1 00:03:52.763: ISAKMP (0:1): processing KE payload. message ID = 0
*Mar  1 00:03:54.635: ISAKMP (0:1): processing NONCE payload. message ID = 0
*Mar  1 00:03:54.639: ISAKMP (0:1): found peer pre-shared key matching 10.1.4.1
*Mar  1 00:03:54.651: ISAKMP (0:1): SKEYID state generated
*Mar  1 00:03:54.655: ISAKMP (0:1): processing vendor id payload
*Mar  1 00:03:54.663: ISAKMP (0:1): speaking to another IOS box!
*Mar  1 00:03:54.663: ISAKMP (1): ID payload
        next-payload : 8
        type         : 1
        protocol     : 17
        port         : 500
        length       : 8
*Mar  1 00:03:54.667: ISAKMP (1): Total payload length: 12
*Mar  1 00:03:54.675: ISAKMP (0:1): sending packet to 10.1.4.1 
 (I) MM_KEY_EXCH
*Mar  1 00:03:54.759: ISAKMP (0:1): received packet from 10.1.4.1 
 (I) MM_KEY_EXCH
*Mar  1 00:03:54.767: ISAKMP (0:1): processing ID payload. message ID = 0
*Mar  1 00:03:54.767: ISAKMP (0:1): processing HASH payload. message ID = 0
*Mar  1 00:03:54.775: ISAKMP (0:1): SA has been authenticated with 
 10.1.4.1
*Mar  1 00:03:54.779: ISAKMP (0:1): beginning Quick Mode exchange, 
 M-ID of 581713929
*Mar  1 00:03:54.799: ISAKMP (0:1): sending packet to 10.1.4.1 (I) QM_IDLE

*Mar  1 00:03:55.155: ISAKMP (0:1): received packet from 10.1.4.1 (I) QM_IDLE

*Mar  1 00:03:55.171: ISAKMP (0:1): processing HASH payload. 
 message ID = 581713929
*Mar  1 00:03:55.175: ISAKMP (0:1): processing SA payload. 
 message ID = 581713929
*Mar  1 00:03:55.179: ISAKMP (0:1): Checking IPSec proposal 1

!--- IKE exchanges the IPsec phase 2 parameters between !--- Spoke 1 and Hub.

*Mar  1 00:03:55.179: ISAKMP: transform 1, ESP_DES
*Mar  1 00:03:55.183: ISAKMP:   attributes in transform:
*Mar  1 00:03:55.183: ISAKMP:      encaps is 1
*Mar  1 00:03:55.183: ISAKMP:      SA life type in seconds
*Mar  1 00:03:55.187: ISAKMP:      SA life duration (basic) of 3600
*Mar  1 00:03:55.187: ISAKMP:      SA life type in kilobytes
*Mar  1 00:03:55.191: ISAKMP:      SA life duration (VPI) of  0x0 0x46 0x50 0x0
*Mar  1 00:03:55.195: ISAKMP:      authenticator is HMAC-MD5
*Mar  1 00:03:55.199: ISAKMP (0:1): atts are acceptable.

!--- IKE has successfully negotiated phase 2 IPsec !--- SA between Hub and Spoke 2.

*Mar  1 00:03:55.203: IPSEC(validate_proposal_request): proposal part #1,
  (key eng. msg.) INBOUND local= 10.1.2.1, remote= 10.1.4.1,
    local_proxy= 172.16.1.0/255.255.255.0/0/0 (type=4),
    remote_proxy= 192.168.1.0/255.255.255.0/0/0 (type=4),
    protocol= ESP, transform= esp-des esp-md5-hmac ,
    lifedur= 0s and 0kb,
    spi= 0x0(0), conn_id= 0, keysize= 0, flags= 0x4
*Mar  1 00:03:55.219: ISAKMP (0:1): processing NONCE payload. 
 message ID = 581713929
*Mar  1 00:03:55.219: ISAKMP (0:1): processing ID payload. 
 message ID = 581713929
*Mar  1 00:03:55.223: ISAKMP (0:1): processing ID payload. 
 message ID = 581713929
*Mar  1 00:03:55.251: ISAKMP (0:1): Creating IPSec SAs
*Mar  1 00:03:55.255:         inbound SA from 10.1.4.1 to 10.1.2.1
        (proxy 192.168.1.0 to 172.16.1.0)
*Mar  1 00:03:55.259:         has spi 0xD44FE97C and conn_id 2000 and flags 4
*Mar  1 00:03:55.263:         lifetime of 3600 seconds
*Mar  1 00:03:55.263:         lifetime of 4608000 kilobytes
*Mar  1 00:03:55.267:         outbound SA from 10.1.2.1       to 10.1.4.1
  (proxy 172.16.1.0      to 192.168.1.0    )
*Mar  1 00:03:55.271:         has spi -86399127 and conn_id 2001 and flags C
*Mar  1 00:03:55.271:         lifetime of 3600 seconds
*Mar  1 00:03:55.275:         lifetime of 4608000 kilobytes
*Mar  1 00:03:55.279: ISAKMP (0:1): sending packet to 10.1.4.1 (I) QM_IDLE

*Mar  1 00:03:55.283: ISAKMP (0:1): deleting node 581713929 error FALSE reason "
"
*Mar  1 00:03:55.287: IPSEC(key_engine): got a queue event...
*Mar  1 00:03:55.291: IPSEC(initialize_sas): ,
  (key eng. msg.) INBOUND local= 10.1.2.1, remote= 10.1.4.1,
    local_proxy= 172.16.1.0/255.255.255.0/0/0 (type=4),
    remote_proxy= 192.168.1.0/255.255.255.0/0/0 (type=4),
    protocol= ESP, transform= esp-des esp-md5-hmac ,
    lifedur= 3600s and 4608000kb,
    spi= 0xD44FE97C(3562006908), conn_id= 2000, keysize= 0, flags= 0x4
*Mar  1 00:03:55.303: IPSEC(initialize_sas): ,
  (key eng. msg.) OUTBOUND local= 10.1.2.1, remote= 10.1.4.1,
    local_proxy= 172.16.1.0/255.255.255.0/0/0 (type=4),
    remote_proxy= 192.168.1.0/255.255.255.0/0/0 (type=4),
    protocol= ESP, transform= esp-des esp-md5-hmac ,
    lifedur= 3600s and 4608000kb,
    spi= 0xFAD9A769(4208568169), conn_id= 2001, keysize= 0, flags= 0xC
*Mar  1 00:03:55.319: IPSEC(create_sa): sa created,
  (sa) sa_dest= 10.1.2.1, sa_prot= 50,
    sa_spi= 0xD44FE97C(3562006908),
    sa_trans= esp-des esp-md5-hmac , sa_conn_id= 2000
*Mar  1 00:03:55.323: IPSEC(create_sa): sa created,
  (sa) sa_dest= 10.1.4.1, sa_prot= 50,
    sa_spi= 0xFAD9A769(4208568169),
    sa_trans= esp-des esp-md5-hmac , sa_conn_id= 2001

!--- The IPsec tunnel between Spoke 1 and Hub is set up.

相关信息

修订历史记录

版本 发布日期 备注
1.0
18-Jan-2007
初始版本

此文档是否有帮助?

Feedback反馈

联系我们

本文档适用于以下产品