在PIX和使用智能卡证书的Cisco VPN客户端之间的IPSec配置示例

!--- Define a hostname and domain name for the router. !--- The fully qualified domain name (FQDN) is used !--- as the identity of the router during certificate enrollment.
 
pix(config)#hostname sv2-11 
sv2-11(config)#domain-name cisco.com 

!--- Confirm that you have the correct time set on the PIX.
 
show clock 
clock set 
         
         
           { 
           
           
             | 
             
             
               } 
               
               
              
             
            
           
         

 !--- This command clears the PIX RSA keys.
 
ca zeroize rsa

!--- Generate RSA (encryption and authentication) keys.
 
ca gen rsa key 

!--- Select the modulus size (512 or 1024). !--- Confirm the keys generated.

show ca mypub rsa 

!--- Define the CA identity.

ca ident kobe 10.1.1.2:/certsrv/mscep/mscep.dll 
ca conf kobe ra 1 20 crlopt 
ca auth kobe 
ca enroll kobe [ipaddress] 

!--- Confirm the certificate and validity. 

show ca cert 

PIX Version 6.3(3)
interface ethernet0 auto
interface ethernet1 auto
interface ethernet2 auto shutdown
interface ethernet3 auto shutdown
interface ethernet4 auto shutdown
interface ethernet5 auto shutdown
nameif ethernet0 outside security0
nameif ethernet1 inside security100
nameif ethernet2 intf2 security4
nameif ethernet3 intf3 security6
nameif ethernet4 intf4 security8
nameif ethernet5 intf5 security10
enable password 8Ry2YjIyt7RRXU24 encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
hostname sv2-11
domain-name cisco.com
fixup protocol dns maximum-length 512
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol skinny 2000
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
names
access-list 101 permit tcp any host 209.165.201.21 eq www 
access-list 120 permit ip 10.1.1.0 255.255.255.0 10.0.0.0 255.255.255.0 
pager lines 24
mtu outside 1500
mtu inside 1500
mtu intf2 1500
mtu intf3 1500
mtu intf4 1500
mtu intf5 1500
ip address outside 209.165.201.20 255.255.255.224
ip address inside 10.1.1.10 255.255.255.0
ip address intf2 127.0.0.1 255.255.255.255
no ip address intf3
no ip address intf4
no ip address intf5
ip audit info action alarm
ip audit attack action alarm
ip local pool vpnpool 10.0.0.10-10.0.0.100
no failover
failover timeout 0:00:00
failover poll 15
no failover ip address outside
no failover ip address inside
no failover ip address intf2
no failover ip address intf3
no failover ip address intf4
no failover ip address intf5
pdm history enable
arp timeout 14400
nat (inside) 0 access-list 120
static (inside,outside) 209.165.201.21 10.1.1.2 netmask 255.255.255.255 0 0 
access-group 101 in interface outside
route outside 0.0.0.0 0.0.0.0 209.165.201.30 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00
timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+ 
aaa-server RADIUS protocol radius 
aaa-server LOCAL protocol local 
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
floodguard enable
sysopt connection permit-ipsec
crypto ipsec transform-set myset esp-3des esp-md5-hmac 
crypto dynamic-map dynmap 10 set transform-set myset
crypto map mymap 10 ipsec-isakmp dynamic dynmap
crypto map mymap interface outside
isakmp enable outside
isakmp policy 10 authentication rsa-sig
isakmp policy 10 encryption 3des
isakmp policy 10 hash md5
isakmp policy 10 group 2
isakmp policy 10 lifetime 86400
vpngroup vpncert address-pool vpnpool
vpngroup vpncert idle-time 1800
vpngroup vpncert password ********
ca identity kobe 10.1.1.2:/certsrv/mscep/mscep.dll 
ca configure kobe ra 1 20 crloptional
telnet timeout 5
ssh timeout 5
console timeout 0
terminal width 80
Cryptochecksum:2ae252ac69e5218d13d35acdf1f30e55
: end
[OK]
sv2-11(config)#