配置路由器到 VPN 客户端的连接，使用模式设置、通配符、预置共享密钥以及 NAT

下载选项

  • PDF     (250.3 KB)
    在各种设备上使用 Adobe Reader 查看
  • ePub     (89.9 KB)
    在 iPhone、iPad、Android、Sony Reader 或 Windows Phone 上使用各种应用查看
  • Mobi (Kindle)     (90.8 KB)
    在 Kindle 设备上查看或在多个设备上使用 Kindle 应用查看
已更新: 2006 年 11 月 21 日
文档 ID:14123

非歧视性语言

此产品的文档集力求使用非歧视性语言。在本文档集中，非歧视性语言是指不隐含针对年龄、残障、性别、种族身份、族群身份、性取向、社会经济地位和交叉性的歧视的语言。由于产品软件的用户界面中使用的硬编码语言、基于 RFP 文档使用的语言或引用的第三方产品使用的语言，文档中可能无法确保完全使用非歧视性语言。 深入了解思科如何使用包容性语言。

关于此翻译

思科采用人工翻译与机器翻译相结合的方式将此文档翻译成不同语言，希望全球的用户都能通过各自的语言得到支持性的内容。 请注意：即使是最好的机器翻译，其准确度也不及专业翻译人员的水平。 Cisco Systems, Inc. 对于翻译的准确性不承担任何责任，并建议您总是参考英文原始文档（已提供链接）。

简介

此示例配置说明路由器配置用于模式配置(用户从池获得IP地址)、通配符预共享密钥 (所有PC客户端共享相同密钥) 和网络地址转换(NAT)。 在此配置中，外部用户可以进入网络，并从池中分配一个内部IP地址。对于用户而言，他们看上去像位于网络内部。由于私有寻址，因此涉及NAT。路由器必须被告知应该转换什么，不转换什么。

先决条件

要求

本文档没有任何特定的要求。

使用的组件

本文档中的信息基于以下软件和硬件版本：

  • Cisco IOS® 软件版本 12.0.7T 或更高版本

  • 支持此软件修订版的硬件

  • CiscoSecure VPN Client 1.0/10A或1.1 (分别显示为2.0.7/E或2.1.12，请在Help>About中检查)

本文档中的信息都是基于特定实验室环境中的设备编写的。本文档中使用的所有设备最初均采用原始（默认）配置。如果您使用的是真实网络，请确保您已经了解所有命令的潜在影响。

规则

有关文件规则的更多信息请参见“ Cisco技术提示规则”。

配置

本部分提供有关如何配置本文档所述功能的信息。

注：要查找有关本文档中使用的命令的其他信息，请使用命令查找工具(仅注册客户)。

网络图

本文档使用此图所示的网络设置。

25a.gif

配置

本文档使用以下配置。

VPN 客户端配置 
Network Security policy: 

1- Myconn 
        My Identity = ip address
                Connection security: Secure 
                Remote Party Identity and addressing 
                        ID Type: IP subnet 
                        10.2.2.0
                        Port all Protocol all 

                Connect using secure tunnel 
                        ID Type: IP address 
                        201.70.32.101 

        Authentication (Phase 1) 
        Proposal 1 
                Authentication method: pre-shared key 
                Encryp Alg: DES 
                Hash Alg: MD5 
                SA life: Unspecified
                Key Group: DH 1 

        Key exchange (Phase 2) 
        Proposal 1 
                Encapsulation ESP 
                Encrypt Alg: DES 
                Hash Alg: MD5 
                Encap: tunnel 
                SA life: Unspecified 
                no AH 

2- Other Connections 
            Connection security: Non-secure 
            Local Network Interface 
                Name: Any 
                IP Addr: Any 
                Port: All

路由器配置 
Current configuration:
!
version 12.0
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname Router
!
enable secret 5 $1$v5OP$mPuiEQn8ULa8hVMYVOV1D.
enable password ww
!
ip subnet-zero
!
cns event-service server
!

!--- IKE configuration.

 crypto isakmp policy 1
hash md5
authentication pre-share
crypto isakmp key cisco123 address 0.0.0.0
crypto isakmp client configuration address-pool local ourpool
!

!--- IPSec configuration.

crypto ipsec transform-set trans1 esp-des esp-md5-hmac
!
crypto dynamic-map dynmap 10
set transform-set trans1
!
crypto map intmap client configuration address initiate
crypto map intmap client configuration address respond
crypto map intmap 10 ipsec-isakmp dynamic dynmap
 !
 interface Ethernet0
ip address 201.70.32.101 255.255.255.0
 no ip directed-broadcast
ip nat outside
no ip route-cache
no ip mroute-cache
 crypto map intmap
 !
interface Serial1
ip address 10.2.2.1 255.255.255.0
no ip directed-broadcast
ip nat inside
!
 ip local pool ourpool 10.2.1.1 10.2.1.254
ip nat pool outsidepool 201.70.32.150 201.70.32.160 netmask 255.255.255.0

!--- Except the private network to private network traffic !--- from the NAT process.

ip nat inside source route-map nonat pool outsidepool
 ip classless
ip route 0.0.0.0 0.0.0.0 201.70.32.1
no ip http server

!--- Except the private network to private network traffic !--- from the NAT process.

access-list 101 deny ip 10.2.2.0 0.0.0.255 10.2.1.0 0.0.0.255
access-list 101 permit ip 10.2.2.0 0.0.0.255 any
route-map nonat permit 10
match ip address 101
 !
line con 0
transport input none
line aux 0
line vty 0 4
password ww
login
!
end

验证

本部分所提供的信息可用于确认您的配置是否正常工作。

命令输出解释程序工具（仅限注册用户）支持某些 show 命令，使用此工具可以查看对 show 命令输出的分析。

  • show crypto engine connections active - 显示加密的数据包和解密的数据包。

  • show crypto ipsec sa - 显示阶段 2 的安全关联。

  • show crypto isakmp sa - 显示第 1 阶段的安全关联。

故障排除

本部分提供的信息可用于对配置进行故障排除。

故障排除命令

注意：在发出debug命令之前，请参阅有关Debug命令的重要信息。

必须在这两个 IPSec 路由器（对等体）上都运行这些调试。 必须在两个对等体上清除安全关联。

  • debug crypto ipsec - 显示第 2 阶段的 IPsec 协商。

  • debug crypto isakmp - 显示第 1 阶段的 ISAKMP 协商。

  • debug crypto engine - 显示已加密的流量。

  • clear crypto isakmp - 清除与第 1 阶段相关的安全关联。

  • clear crypto sa - 清除与第 2 阶段相关的安全关联。

调试输出示例

路由器调试 
Apr 18 15:17:59: ISAKMP (4): received packet from 
    201.70.32.82 (R) MM_NO_STATE
Apr 18 15:17:59: ISAKMP (4): received packet from 
    201.70.32.82 (R) MM_NO_STATE
Apr 18 15:18:03: ISAKMP (0): received packet from 
    201.70.32.82 (N) NEW SA
Apr 18 15:18:03: ISAKMP (0:5): processing SA payload. 
    message ID = 0
Apr 18 15:18:03: ISAKMP (0:5): Checking ISAKMP transform 1 
    against priority 1 policy
Apr 18 15:18:03: ISAKMP:      encryption DES-CBC
Apr 18 15:18:03: ISAKMP:      hash MD5
Apr 18 15:18:03: ISAKMP:      default group 1
Apr 18 15:18:03: ISAKMP:      auth pre-share
Apr 18 15:18:03: ISAKMP (0:5): atts are acceptable. 
    Next payload is 0
Apr 18 15:18:03: CryptoEngine0: generate alg parameter
Apr 18 15:18:05: CRYPTO_ENGINE: Dh phase 1 status: 0
Apr 18 15:18:05: CRYPTO_ENGINE: Dh phase 1 status: 0
Apr 18 15:18:05: ISAKMP (0:5): SA is doing pre-shared 
    key authentication
Apr 18 15:18:05: ISAKMP (5): SA is doing pre-shared 
    key authentication using id type ID_IPV4_ADDR
Apr 18 15:18:05: ISAKMP (5): sending packet to 
    201.70.32.82 (R) MM_SA_SETUP
Apr 18 15:18:05: ISAKMP (5): received packet from 
    201.70.32.82 (R) MM_SA_SETUP
Apr 18 15:18:05: ISAKMP (0:5): processing KE payload. 
    message ID = 0
Apr 18 15:18:05: CryptoEngine0: generate alg parameter
Apr 18 15:18:05: CRYPTO_ENGINE: Dh phase 1 status: 0
Apr 18 15:18:05: CRYPTO_ENGINE: Dh phase 1 status: 0
Apr 18 15:18:05: ISAKMP (0:5): SA is doing pre-shared 
    key authentication
Apr 18 15:18:05: ISAKMP (5): SA is doing pre-shared 
    key authentication using id
type ID_IPV4_ADDR
Apr 18 15:18:05: ISAKMP (5): sending packet to 
    201.70.32.82 (R) MM_SA_SETUP
Apr 18 15:18:05: ISAKMP (5): received packet from 
    201.70.32.82 (R) MM_SA_SETUP
Apr 18 15:18:05: ISAKMP (0:5): processing KE payload. 
    message ID = 0
Apr 18 15:18:05: CryptoEngine0: generate alg parameter
Apr 18 15:18:07: ISAKMP (0:5): processing NONCE payload. 
    message ID = 0
Apr 18 15:18:07: CryptoEngine0: create ISAKMP SKEYID for 
    conn id 5
Apr 18 15:18:07: ISAKMP (0:5): SKEYID state generated
Apr 18 15:18:07: ISAKMP (0:5): processing vendor id payload
Apr 18 15:18:07: ISAKMP (0:5): processing vendor id payload
Apr 18 15:18:07: ISAKMP (5): sending packet to 201.70.32.82 
    (R) MM_KEY_EXCH
Apr 18 15:18:07: ISAKMP (0:4): purging SA.
Apr 18 15:18:07: ISAKMP (0:4): purging node -1412157317
Apr 18 15:18:07: ISAKMP (0:4): purging node 1875403554
Apr 18 15:18:07: CryptoEngine0: delete connection 4
Apr 18 15:18:08: ISAKMP (5): received packet from 
    201.70.32.82 (R) MM_KEY_EXCH
Apr 18 15:18:08: ISAKMP (0:5): processing ID payload. 
    message ID = 0
Apr 18 15:18:08: ISAKMP (0:5): processing HASH payload. 
    message ID = 0
Apr 18 15:18:08: CryptoEngine0: generate hmac context 
    for conn id 5
Apr 18 15:18:08: ISAKMP (5): processing NOTIFY payload 
    24578 protocol 1 spi 0, message ID = 0
Apr 18 15:18:08: ISAKMP (0:5): SA has been authenticated 
    with 201.70.32.82
Apr 18 15:18:08: ISAKMP (5): ID payload
        next-payload : 8
        type         : 1
        protocol     : 17
        port         : 500
        length       : 8
Apr 18 15:18:08: ISAKMP (5): Total payload length: 12
Apr 18 15:18:08: CryptoEngine0: generate hmac context 
    for conn id 5
Apr 18 15:18:08: CryptoEngine0: clear dh number 
    for conn id 1
Apr 18 15:18:08: ISAKMP (5): sending packet to 
    201.70.32.82 (R) QM_IDLE
Apr 18 15:18:08: ISAKMP (5): received packet from 
    201.70.32.82 (R) QM_IDLE
Apr 18 15:18:08: ISAKMP (0:5): Locking struct 14D0DC 
    on allocation
Apr 18 15:18:08: ISAKMP (0:5): allocating address 
    10.2.1.1
Apr 18 15:18:08: CryptoEngine0: generate hmac context 
    for conn id 5
Apr 18 15:18:08: ISAKMP (0:5): initiating peer config to 
    201.70.32.82. message ID = 1226793520
Apr 18 15:18:08: ISAKMP (5): sending packet to 201.70.32.82 
    (R) QM_IDLE
Apr 18 15:18:09: ISAKMP (5): received packet from 201.70.32.82 
    (R) QM_IDLE
Apr 18 15:18:09: ISAKMP (0:5): processing transaction payload 
    from 201.70.32.82. message ID = 1226793520
Apr 18 15:18:09: ISAKMP: recieved config from 201.70.32.82   .
Apr 18 15:18:09: CryptoEngine0: generate hmac context 
    for conn id 5
Apr 18 15:18:09: ISAKMP:     Config payload type: 4
Apr 18 15:18:09: ISAKMP (0:5): peer accepted the address!
Apr 18 15:18:09: ISAKMP (0:5): adding static route for 10.2.1.1
Apr 18 15:18:09: ISAKMP (0:5): deleting node 1226793520
Apr 18 15:18:09: CryptoEngine0: generate hmac context for 
    conn id 5
Apr 18 15:18:09: ISAKMP (0:5): processing SA payload. 
    message ID = -617682048
Apr 18 15:18:09: ISAKMP (0:5): Checking IPSec proposal 1
Apr 18 15:18:09: ISAKMP: transform 1, ESP_DES
Apr 18 15:18:09: ISAKMP:   attributes in transform:
Apr 18 15:18:09: ISAKMP:      authenticator is HMAC-MD5
Apr 18 15:18:09: ISAKMP:      encaps is 1
Apr 18 15:18:09: validate proposal 0
Apr 18 15:18:09: ISAKMP (0:5): atts are acceptable.
Apr 18 15:18:09: IPSEC(validate_proposal_request): 
    proposal part #1, (key eng. msg.) dest= 201.70.32.101, 
    src= 201.70.32.82, dest_proxy= 10.2.2.0/255.255.255.0/0/0 
    (type=4), src_proxy= 10.2.1.1/255.255.255.255/0/0 (type=1),
    protocol= ESP, transform= esp-des esp-md5-hmac ,
    lifedur= 0s and 0kb, spi= 0x0(0), conn_id= 0, keysize= 0, 
    flags= 0x4
Apr 18 15:18:09: validate proposal request 0
Apr 18 15:18:09: ISAKMP (0:5): processing NONCE payload. 
    message ID = -617682048
Apr 18 15:18:09: ISAKMP (0:5): processing ID payload. 
    message ID = -617682048
Apr 18 15:18:09: ISAKMP (5): ID_IPV4_ADDR src 10.2.1.1 
    prot 0 port 0
Apr 18 15:18:09: ISAKMP (0:5): processing ID payload. 
    message ID = -617682048
Apr 18 15:18:09: ISAKMP (5): ID_IPV4_ADDR_SUBNET dst 
    10.2.2.0/255.255.255.0 prot 0 port 0
Apr 18 15:18:09: IPSEC(key_engine): got a queue event...
Apr 18 15:18:09: IPSEC(spi_response): getting spi 
    153684796 for SA from 201.70.32.82    to 201.70.32.101   
    for prot 3
Apr 18 15:18:09: CryptoEngine0: generate hmac context 
    for conn id 5
Apr 18 15:18:09: ISAKMP (5): sending packet to 201.70.32.82 
    (R) QM_IDLE
Apr 18 15:18:09: ISAKMP (5): received packet from 201.70.32.82 
    (R) QM_IDLE
Apr 18 15:18:09: CryptoEngine0: generate hmac context 
    for conn id 5
Apr 18 15:18:09: ISAKMP (0:5): processing SA payload. 
    message ID = -1078114754
Apr 18 15:18:09: ISAKMP (0:5): Checking IPSec proposal 1
Apr 18 15:18:10: ISAKMP: transform 1, ESP_DES
Apr 18 15:18:10: ISAKMP:   attributes in transform:
Apr 18 15:18:10: ISAKMP:      authenticator is HMAC-MD5
Apr 18 15:18:10: ISAKMP:      encaps is 1
Apr 18 15:18:10: validate proposal 0
Apr 18 15:18:10: ISAKMP (0:5): atts are acceptable.
Apr 18 15:18:10: IPSEC(validate_proposal_request): 
    proposal part #1, (key eng. msg.) dest= 201.70.32.101, 
    src= 201.70.32.82, dest_proxy= 10.2.2.0/255.255.255.0/0/0 
    (type=4), src_proxy= 10.2.1.1/255.255.255.255/0/0 (type=1),
    protocol= ESP, transform= esp-des esp-md5-hmac ,
    lifedur= 0s and 0kb, spi= 0x0(0), conn_id= 0, keysize= 0, 
    flags= 0x4
Apr 18 15:18:10: validate proposal request 0
Apr 18 15:18:10: ISAKMP (0:5): processing NONCE payload. 
    message ID = -1078114754
Apr 18 15:18:10: ISAKMP (0:5): processing ID payload. 
    message ID = -1078114754
Apr 18 15:18:10: ISAKMP (5): ID_IPV4_ADDR src 10.2.1.1 
    prot 0 port 0
Apr 18 15:18:10: ISAKMP (0:5): processing ID payload. 
    message ID = -1078114754
Apr 18 15:18:10: ISAKMP (5): ID_IPV4_ADDR_SUBNET dst 
    10.2.2.0/255.255.255.0 prot 0 port 0
Apr 18 15:18:10: IPSEC(key_engine): got a queue event...
Apr 18 15:18:10: IPSEC(spi_response): getting spi 224008976 
    for SA from 201.70.32.82    to 201.70.32.101   
    for prot 3
Apr 18 15:18:10: CryptoEngine0: generate hmac context 
    for conn id 5
Apr 18 15:18:10: ISAKMP (5): sending packet to 201.70.32.82 
    (R) QM_IDLE
Apr 18 15:18:10: ISAKMP (5): received packet from 201.70.32.82 
    (R) QM_IDLE
Apr 18 15:18:10: CryptoEngine0: generate hmac context 
    for conn id 5
Apr 18 15:18:10: ipsec allocate flow 0
Apr 18 15:18:10: ipsec allocate flow 0
Apr 18 15:18:10: ISAKMP (0:5): Creating IPSec SAs
Apr 18 15:18:10:         inbound SA from 201.70.32.82    
    to 201.70.32.101   (proxy 10.2.1.1        to 10.2.2.0)
Apr 18 15:18:10:         has spi 224008976 and conn_id 2000 
    and flags 4
Apr 18 15:18:10:         outbound SA from 201.70.32.101   
    to 201.70.32.82    (proxy 10.2.2.0        to 10.2.1.1)
Apr 18 15:18:10:         has spi -1084694986 and conn_id 2001 
    and flags 4
Apr 18 15:18:10: ISAKMP (0:5): deleting node -1078114754
Apr 18 15:18:10: IPSEC(key_engine): got a queue event...
Apr 18 15:18:10: IPSEC(initialize_sas): ,
  (key eng. msg.) dest= 201.70.32.101, src= 201.70.32.82,
    dest_proxy= 10.2.2.0/255.255.255.0/0/0 (type=4),
    src_proxy= 10.2.1.1/0.0.0.0/0/0 (type=1),
    protocol= ESP, transform= esp-des esp-md5-hmac ,
    lifedur= 0s and 0kb,
    spi= 0xD5A1B10(224008976), conn_id= 2000, keysize= 0, 
    flags= 0x4
Apr 18 15:18:10: IPSEC(initialize_sas): ,
  (key eng. msg.) src= 201.70.32.101, dest= 201.70.32.82,
    src_proxy= 10.2.2.0/255.255.255.0/0/0 (type=4),
    dest_proxy= 10.2.1.1/0.0.0.0/0/0 (type=1),
    protocol= ESP, transform= esp-des esp-md5-hmac ,
    lifedur= 0s and 0kb,
    spi= 0xBF58DE36(3210272310), conn_id= 2001, keysize= 0, 
    flags= 0x4
Apr 18 15:18:10: IPSEC(create_sa): sa created,
  (sa) sa_dest= 201.70.32.101, sa_prot= 50,
    sa_spi= 0xD5A1B10(224008976),
    sa_trans= esp-des esp-md5-hmac , sa_conn_id= 2000
Apr 18 15:18:10: IPSEC(create_sa): sa created,
  (sa) sa_dest= 201.70.32.82, sa_prot= 50,
    sa_spi= 0xBF58DE36(3210272310),
    sa_trans= esp-des esp-md5-hmac , sa_conn_id= 2001
Apr 18 15:18:10: ISAKMP: Locking struct 14D0DC for IPSEC
Apr 18 15:18:24: ISAKMP (0:5): retransmitting 
    phase 2 -617682048 ...
Apr 18 15:18:24: ISAKMP (5): sending packet to 201.70.32.82 
    (R) QM_IDLE

Router#show crypto ipsec
Apr 18 15:18:39: ISAKMP (0:5): retransmitting 
    phase 2 -617682048 ...
Apr 18 15:18:39: ISAKMP (5): sending packet to 201.70.32.82 
    (R) QM_IDLE      sa

interface: Ethernet0
    Crypto map tag: intmap, local addr. 201.70.32.101

   local  ident (addr/mask/prot/port): 
   (10.2.2.0/255.255.255.0/0/0)
   remote ident (addr/mask/prot/port): 
   (10.2.1.1/255.255.255.255/0/0)
   current_peer: 201.70.32.82
     PERMIT, flags={}
    #pkts encaps: 7, #pkts encrypt: 7, #pkts digest 7
    #pkts decaps: 7, #pkts decrypt: 7, #pkts verify 7
    #pkts compressed: 0, #pkts decompressed: 0
    #pkts not compressed: 0, #pkts compr. failed: 0, 
    #pkts decompress failed: 0
    #send errors 0, #recv errors 0

     local crypto endpt.: 201.70.32.101, remote 
     crypto endpt.: 201.70.32.82
     path mtu 1500, media mtu 1500
     current outbound spi: BF58DE36

     inbound esp sas:
      spi: 0xD5A1B10(224008976)
        transform: esp-des esp-md5-hmac ,
        in use settings ={Tunnel, }
        slot: 0, conn id: 2000, flow_id: 1, 
        crypto map: intmap
        sa timing: remaining key lifetime 
       (k/sec): (4607999/3500)
        IV size: 8 bytes
        replay detection support: Y


     inbound ah sas:


     inbound pcp sas:


     outbound esp sas:
      spi: 0xBF58DE36(3210272310)
        transform: esp-des esp-md5-hmac ,
        in use settings ={Tunnel, }
        slot: 0, conn id: 2001, flow_id: 2, 
     crypto map: intmap
        sa timing: remaining key lifetime 
        (k/sec): (4607999/3500)
        IV size: 8 bytes
        replay detection support: Y


     outbound ah sas:

     outbound pcp sas:

Router#sho crypto engine connections active

  ID Interface       IP-Address      State  Algorithm     Encrypt  Decrypt
   5                     set    HMAC_MD5+DES_56_CB        0        0
2000 Ethernet0       201.70.32.101   set    HMAC_MD5+DES_56_CB  0        7
2001 Ethernet0       201.70.32.101   set    HMAC_MD5+DES_56_CB  7        0
Crypto adjacency count : Lock: 0, Unlock: 0

VPN 客户端信息 
Client configuration:
C:\>ping -t 10.2.2.5
Reply from 10.2.2.5: bytes=32 time<0ms TTL=352

Reply from 10.2.2.5: bytes=32 time<10ms TTL=352

From Logview:
14:25:34.044 New Connection - Initiating IKE 
    Phase 1 (IP ADDR=201.70.32.101)

14:25:34.144 New Connection - SENDING>>>> ISAKMP 
    OAK MM (SA)
14:25:35.886 New Connection - RECEIVED<<< ISAKMP 
    OAK MM (SA)
14:25:36.067 New Connection - SENDING>>>> ISAKMP 
    OAK MM (KE, NON, VID, VID)
14:25:38.310 New Connection - RECEIVED<<< ISAKMP 
    OAK MM (KE, NON, VID)
14:25:38.460 New Connection - SENDING>>>> ISAKMP 
    OAK MM *(ID, HASH, NOTIFY:STATUS_INITIAL_CONTACT)
14:25:38.610 New Connection - RECEIVED<<< ISAKMP 
    OAK MM *(ID, HASH)
14:25:38.710 New Connection - Established IKE SA
14:25:38.811 New Connection - Initiating IKE Phase 
    2 with Client IDs (message id
: B01876)
14:25:38.911   Initiator = IP ADDR=201.70.32.82, 
    prot = 0 port = 0

14:25:39.011   Responder = IP SUBNET/MASK=10.2.2.0/255.255.255.0, 
    prot = 0 port = 0

14:25:39.111 New Connection - SENDING>>>> 
    ISAKMP OAK QM *(HASH, SA, NON, ID, ID)
14:25:39.251 New Connection - RECEIVED<<< ISAKMP 
    OAK TRANS *(HASH, ATTR)
14:25:39.351 New Connection - Received Private IP 
    Address = IP ADDR=10.2.1.1

14:25:39.451 New Connection - Discarding IPSec SA 
    negotiation (message id: B01876)
14:25:39.552 New Connection - SENDING>>>> ISAKMP OAK 
    TRANS *(HASH, ATTR)
14:25:40.022 New Connection - Received message for discarded 
    IPSec SA negotiation (message id: B01876)
14:25:40.122 New Connection - Initiating IKE Phase 2 with 
    Client IDs (message id: C8CB0CE)
14:25:40.223   Initiator = IP ADDR=10.2.1.1, prot = 0 port = 0
14:25:40.323   Responder = IP SUBNET/MASK=10.2.2.0/255.255.255.0, 
    prot = 0 port = 0
14:25:40.423 New Connection - SENDING>>>> ISAKMP OAK 
    QM *(HASH, SA, NON, ID, ID)
14:25:40.873 New Connection - RECEIVED<<< ISAKMP OAK 
    QM *(HASH, SA, NON, ID, ID,
 NOTIFY:STATUS_RESP_LIFETIME)
14:25:40.974 New Connection - SENDING>>>> ISAKMP OAK 
    QM *(HASH)
14:25:41.074 New Connection - Loading IPSec SA 
    (Message ID = C8CB0CE OUTBOUND SPI = 19A22423 
    INBOUND SPI = E4829433)
14:25:41.174

相关信息

此文档是否有帮助?

Feedback反馈

联系我们

本文档适用于以下产品