Atualize o firmware do telefone IP com o CCME

Opções de download

PDF (176.4 KB)
Ver no Adobe Reader em vários dispositivos
ePub (85.4 KB)
Ver em vários aplicativos no iPhone, iPad, Android, Sony Reader ou Windows Phone
Mobi (Kindle) (76.3 KB)
Ver no dispositivo Kindle ou no aplicativo Kindle em vários dispositivos

Atualizado:2 de fevereiro de 2006

ID do documento:68244

Linguagem imparcial

O conjunto de documentação deste produto faz o possível para usar uma linguagem imparcial. Para os fins deste conjunto de documentação, a imparcialidade é definida como uma linguagem que não implica em discriminação baseada em idade, deficiência, gênero, identidade racial, identidade étnica, orientação sexual, status socioeconômico e interseccionalidade. Pode haver exceções na documentação devido à linguagem codificada nas interfaces de usuário do software do produto, linguagem usada com base na documentação de RFP ou linguagem usada por um produto de terceiros referenciado. Saiba mais sobre como a Cisco está usando a linguagem inclusiva.

Sobre esta tradução

A Cisco traduziu este documento com a ajuda de tecnologias de tradução automática e humana para oferecer conteúdo de suporte aos seus usuários no seu próprio idioma, independentemente da localização. Observe que mesmo a melhor tradução automática não será tão precisa quanto as realizadas por um tradutor profissional. A Cisco Systems, Inc. não se responsabiliza pela precisão destas traduções e recomenda que o documento original em inglês (link fornecido) seja sempre consultado.

Introduction

Prerequisites

Requirements

Componentes Utilizados

Conventions

Informações de Apoio

Imagens assinadas e não assinadas (Autenticação de imagem)

Configurar

Downloads

Configurações passo a passo

Verificar

Troubleshoot

Informações Relacionadas

Introduction

Este documento fornece o procedimento de como atualizar a firmware do Cisco IP Phone com o Cisco CallManager Express.

Prerequisites

Requirements

Certifique-se de atender a estes requisitos antes de tentar esta configuração:

Os telefones IP da Cisco estão registrados no momento no Cisco CallManager Express.

Componentes Utilizados

As informações neste documento se baseiam nessas versões de software e hardware, mas se aplicam a todas as versões do Cisco CallManager Express e cargas de telefone IP da Cisco:

Cisco IOS? Roteador no Cisco IOS? Versão 12.4(4)T com Cisco CallManager Express Release 3.4(0)
Telefone IP 7960 da Cisco

The information in this document was created from the devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration. If your network is live, make sure that you understand the potential impact of any command.

Conventions

Consulte as Convenções de Dicas Técnicas da Cisco para obter mais informações sobre convenções de documentos.

Informações de Apoio

Imagens assinadas e não assinadas (Autenticação de imagem)

Há dois tipos de imagens usadas nos telefones IP 7960 e 7940 da Cisco: imagens assinadas e não assinadas. A autenticação de imagem é executada através de arquivos binários assinados. As imagens assinadas têm uma extensão .sbn, enquanto as imagens não assinadas têm uma extensão .bin.

As versões de imagem anteriores à 5.x aceitam arquivos binários não assinados. As versões de imagem 5.x e posteriores aceitam somente arquivos binários assinados, o que melhora a segurança dos telefones IP 7960 e 7940 da Cisco. No entanto, o uso de arquivos binários assinados não permite que você retorne a uma imagem de firmware não assinada anteriormente. Quando uma imagem do firmware versão 5.0 é instalada, independentemente do protocolo, a imagem não pode ser substituída por nenhuma versão anterior. A imagem do firmware pode ser substituída somente por outra imagem assinada versão 5.x ou posterior. Todas as versões anteriores à versão 5.0 para os telefones IP 7960 e 7940 da Cisco não são carregadas no telefone após a instalação.

Configurar

Nesta seção, você recebe as informações para atualizar o firmware do telefone IP da Cisco.

Downloads

Os arquivos de firmware SCCP necessários podem ser baixados do Cisco IP Phone FW 7900 Series (NON SIP) - Software Download (somente clientes registrados) . Faça o download do arquivo .zip apropriado para o modelo de telefone IP da Cisco. Dependendo do modelo do telefone IP da Cisco, o arquivo .zip pode conter um ou mais arquivos.

O arquivo .zip versão 7.2(3) do firmware para os telefones IP da Cisco modelos 7960 e 7940, cmterm-7940-7960-sccp.7-2-3.zip, inclui estes arquivos:

P00307020300.bin
P00307020300.sbn
P00307020300.sb2
P00307020300.loads

Da mesma forma, o arquivo .zip do firmware para o telefone IP da Cisco modelo 7905G, cmterm-7905G-sccp.6-1-1, inclui estes arquivos:

CP7905060101SCCP050429A.sbin
CP7905060101SCCP050429A.zup

Configurações passo a passo

Para configurar o firmware aplicável, faça o seguinte:

Transfira todos os arquivos de firmware para a memória Flash do Cisco CallManager Express. Para verificar a transferência de arquivos, execute o comando show flash:

Router_CCME#show flash


-#- --length-- -----date/time------ path


!--- Part of output elided.


13      128996 Nov 30 2005 07:05:36 +00:00 P00307020300.bin
14      129400 Nov 30 2005 07:06:02 +00:00 P00307020300.sbn
15      681290 Nov 30 2005 07:06:18 +00:00 P00307020300.sb2
16         461 Nov 30 2005 07:06:34 +00:00 P00307020300.loads

24612864 bytes available (103567360 bytes used)

Disponibilize os arquivos para download pelos telefones IP da Cisco com esta configuração:

Router_CCME#configure terminal
Router_CCME(config)#tftp-server flash: P00307020300.bin
Router_CCME(config)#tftp-server flash: P00307020300.sbn 
Router_CCME(config)#tftp-server flash: P00307020300.sb2
Router_CCME(config)#tftp-server flash: P00307020300.loads

Configure o firmware apropriado para os telefones IP da Cisco:

Router_CCME#configure terminal
Enter configuration commands, one per line.  End with CNTL/Z.
Router_CCME(config)#telephony-service
Router_CCME(config-telephony)#load 7960-7940  P00307020300
Updating CNF files
CNF files updating complete

Observação: no comando load, a extensão (.bin ou .sbn) do arquivo de firmware não deve ser mencionada.

Redefina os telefones IP da Cisco para que eles escolham a nova versão do firmware. Se você planejou tempo de inatividade, redefina todos os telefones de uma só vez. Você também pode redefinir os telefones individualmente, pois os usuários estão prontos.

Router_CCME(config-telephony)#reset ?
  H.H.H         mac address
  all           reset all ethernet phones
  cancel        cancel in progress reset
  sequence-all  reset all ethernet phones sequentially, wait for each phone to
                re-register before reseting the next phone. This prevents
                possible conflict between phones when accessing IOS TFTP
                services.

Router_CCME(config-telephony)#reset all
Reset 1 phones: at 15 second interval        - this could take several minutes p
er phone
Starting with 7960 phones

Router_CCME(config-telephony)#
Reset-All: Requesting Reset for phone SEP000A8A93E0F9 at 172.16.2.101 deviceType
 7 Telecaster 7960  Idle [count=1]

*Nov 30 09:21:39.803 UTC: %IPPHONE-6-UNREGISTER_NORMAL: ephone-1:SEP000A8A93E0F9
 IP:172.16.2.101 Socket:1 DeviceType:Phone has unregistered normally.
Reset/Restart-all looking for phones registered as type 8 Telecaster 7940
Reset/Restart-all looking for phones registered as type 6 Telecaster 7910
Reset/Restart-all looking for phones registered as type 20000 7905
*Nov 30 09:21:53.803 UTC: %IPPHONE-6-REG_ALARM: 22: Name=SEP000A8A93E0F9 Load=7.
2(3.0) Last=Reset-Reset
*Nov 30 09:21:53.803 UTC: %IPPHONE-6-REGISTER: ephone-1:SEP000A8A93E0F9 IP:172.1
6.2.101 Socket:1 DeviceType:Phone has registered.
Reset/Restart-all looking for phones registered as type 30008 7902
Reset/Restart-all looking for phones registered as type 30007 7912
Reset/Restart-all looking for phones registered as type 30002 7920
Reset/Restart-all looking for phones registered as type 30016 CIPC
Reset/Restart-all looking for phones registered as type 30006 7970
Reset/Restart-all looking for phones registered as type 119 7971
Reset/Restart-all looking for phones registered as type 115 7941
Reset/Restart-all looking for phones registered as type 308 7961GE
Reset/Restart-all looking for phones registered as type 309 7941GE
Reset/Restart-all looking for phones registered as type 307 7911
Reset/Restart-all looking for phones registered as type 302 7985
Reset/Restart-all looking for phones registered as type 30018 7961
Reset/Restart-all looking for phones registered as type 30019 7936
Reset/Restart-all looking for phones registered as type 12 ATA Phone
Reset/Restart-all looking for phones registered as type 30027 SCCP Gateway (AN)
Reset/Restart-all looking for phones registered as type 30028 SCCP Gateway (BRI)

Reset/Restart-all looking for phones registered as type 9 7935
Reset/Restart-all looking for phones registered as type 1 30SP+
Reset/Restart-all looking for phones registered as type 2 12SP+
Reset/Restart-all looking for phones registered as type 3 12SP
Reset/Restart-all looking for phones registered as type 4 12
Reset/Restart-all looking for phones registered as type 5 30VIP
Reset/Restart-all looking for phones registered as type 80 Unity Voice Port
Reset/Restart-all looking for phones registered as type 21 Unity Voice Port
Reset/Restart-all looking for phones registered as type -1 Unknown -1
Reset-All issued for 1 phones
 43 seconds (wait for last phone to re-register)

Router_CCME
Router_CCME#show ephone phone-load DeviceName CurrentPhoneload PreviousPhoneload LastReset ===================================================================== SEP000A8A93E0F9 7.2(3.0) 7.2(2.0) Initialized

Router_CCME

Router_CCME#show ephone phone-load
DeviceName        CurrentPhoneload       PreviousPhoneload      LastReset
=====================================================================
SEP000A8A93E0F9   7.2(3.0)               7.2(2.0)               Initialized

Verificar

Use esta seção para confirmar se a sua configuração funciona corretamente.

Emita estes comandos para verificar sua configuração:

show telephony-service all — exibe a configuração detalhada de todos os telefones IP, portas de voz e correspondentes de discagem da Cisco IOS Telephony Service Router.

Router_CCME#show telephony-service all
CONFIG [Version=3.4(0)]
========================
Version 3.4(0)
Cisco CallManager Express
For on-line documentation please see:
www.cisco.com/univercd/cc/td/doc/product/access/ip_ph/ip_ks/index.htm

ip source-address 172.16.2.211 port 2000
load 7960-7940 P00307020300
max-ephones 1
max-dn 1
max-conferences 8 gain -6
dspfarm units 0
dspfarm transcode sessions 0
hunt-group report delay 1 hours
max-redirect 5
time-format 12
date-format mm-dd-yy
timezone 0 Greenwich Standard Time
keepalive 30
timeout interdigit 10
timeout busy 10
timeout ringing 180
caller-id name-only: enable
edit DN through Web:  disabled.
edit TIME through web:  disabled.
Log (table parameters):
     max-size: 150
     retain-timer: 15
create cnf-files version-stamp Jan 01 2002 00:00:00
transfer-system full-consult
auto assign 1 to 1
local directory service: enabled.

ephone-dn 1
number 7001
preference 0 secondary 9
huntstop
call-waiting beep


Number of Configured ephones 1 (Registered 1)
ephone 1
mac-address 000A.8A93.E0F9
type 7960
button  1:1
!


voice-port 50/0/1
 station-id number 7001
!


dial-peer voice 20011 pots
 destination-pattern 7001$
 huntstop
 progress_ind setup enable 3
 port 50/0/1


tftp-server system:/its/SEPDEFAULT.cnf
tftp-server system:/its/SEPDEFAULT.cnf alias SEPDefault.cnf
tftp-server system:/its/XMLDefault.cnf.xml alias XMLDefault.cnf.xml
tftp-server system:/its/ATADefault.cnf.xml
tftp-server system:/its/XMLDefault7960.cnf.xml alias SEP000A8A93E0F9.cnf.xml
tftp-server system:/its/united_states/7960-tones.xml alias United_States/7960-to
nes.xml
tftp-server system:/its/united_states/7960-font.xml alias English_United_States/
7960-font.xml
tftp-server system:/its/united_states/7960-dictionary.xml alias English_United_S
tates/7960-dictionary.xml
tftp-server system:/its/united_states/7960-kate.xml alias English_United_States/
7960-kate.xml
tftp-server system:/its/united_states/SCCP-dictionary.xml alias English_United_S
tates/SCCP-dictionary.xml

show ephone — exibe informações sobre telefones IP registrados da Cisco.

Router_CCME#show ephone

ephone-1 Mac:000A.8A93.E0F9 TCP socket:[1] activeLine:0 REGISTERED in SCCP ver 6
mediaActive:0 offhook:0 ringing:0 reset:0 reset_sent:0 paging 0 debug:1
IP:172.16.2.101 50230 Telecaster 7960  keepalive 5 max_line 6
button 1: dn 1  number 7001 CH1   IDLE

Troubleshoot

Esta seção fornece informações que podem ser usadas para o troubleshooting da sua configuração.

Esses comandos debug ajudam a identificar qualquer problema na atualização do firmware:

debug tftp events
debug ephone register

Este exemplo mostra as informações de depuração geradas quando um Telefone IP 7960 da Cisco é atualizado com êxito para a versão de firmware 7.2.2:

*Nov 30 09:15:19.868 UTC: ephone-1[1]:UnregisterMessage after Reset/Restart sent
*Nov 30 09:15:19.868 UTC: ephone-1[1]:Phone Unregistered on socket [1] SEP000A8A
93E0F9
*Nov 30 09:15:19.868 UTC: ephone-1[1]:UnregisterAck sent on socket [1] (0/0/10)
*Nov 30 09:15:19.868 UTC: %IPPHONE-6-UNREGISTER_NORMAL: ephone-1:SEP000A8A93E0F9
 IP:172.16.2.101 Socket:1 DeviceType:Phone has unregistered normally.
*Nov 30 09:15:19.868 UTC: skinny_server_process: Socket error. errno=0
*Nov 30 09:15:19.868 UTC: ephone-1[1]:DisAssociate: Closed socket 1 for unregist
ered phone
*Nov 30 09:15:19.868 UTC: CLOSED Skinny socket 1 for de-registered phone
*Nov 30 09:15:30.976 UTC: TFTP: Looking for CTLSEP000A8A93E0F9.tlv
*Nov 30 09:15:30.984 UTC: TFTP: Looking for SEP000A8A93E0F9.cnf.xml
*Nov 30 09:15:31.504 UTC: TFTP: Opened system:/its/XMLDefault7960.cnf.xml, fd 0,
 size 788 for process 216
*Nov 30 09:15:31.508 UTC: TFTP: Finished system:/its/XMLDefault7960.cnf.xml, tim
e 00:00:00 for process 216
Reset sequence-all, Ready to reset next phone (last 15 sec)

Reset/Restart-all looking for phones registered as type 8 Telecaster 7940
*Nov 30 09:15:34.384 UTC: New Skinny socket accepted [1] (0 active)
*Nov 30 09:15:34.384 UTC: sin_family 2, sin_port 50230, in_addr 172.16.2.101
*Nov 30 09:15:34.384 UTC: skinny_add_socket 1 172.16.2.101 50230
*Nov 30 09:15:34.869 UTC: %IPPHONE-6-REG_ALARM: 22: Name=SEP000A8A93E0F9 Load=7.
2(3.0) Last=Reset-Reset
*Nov 30 09:15:34.869 UTC:
Skinny StationAlarmMessage on socket [1] 172.16.2.101 SEP000A8A93E0F9
*Nov 30 09:15:34.869 UTC: severityInformational p1=2049 [0x801] p2=1694634156 [0
x650210AC]
*Nov 30 09:15:34.869 UTC: 22: Name=SEP000A8A93E0F9 Load=7.2(3.0) Last=Reset-Rese
t
*Nov 30 09:15:34.869 UTC: ephone-(1)[1] StationRegisterMessage (0/0/10) from 172
.16.2.101
*Nov 30 09:15:34.869 UTC: ephone-(1)[1] Register StationIdentifier DeviceName SE
P000A8A93E0F9
*Nov 30 09:15:34.869 UTC: ephone-(1)[1] StationIdentifier Instance 1    deviceTy
pe 7
*Nov 30 09:15:34.869 UTC: ephone-1[-1]:stationIpAddr 172.16.2.101
*Nov 3
Reset/Restart-all looking for phones registered as type 6 Telecaster 7910 0 09:1
5:34.869 UTC: ephone-1[-1]:maxStreams 0
*Nov 30 09:15:34.869 UTC: ephone-1[-1]:protocol Ver 0x84000006
*Nov 30 09:15:34.869 UTC: ephone-1[-1]:phone-size 2820 dn-size 488
*Nov 30 09:15:34.869 UTC: ephone-(1) Allow any Skinny Server IP address 172.16.2
.211
*Nov 30 09:15:34.869 UTC: ephone-1[-1]:Found entry 0 for 000A8A93E0F9
*Nov 30 09:15:34.869 UTC: ephone-1[-1]:socket change -1 to 1
*Nov 30 09:15:34.869 UTC: ephone-1[-1]:FAILED: CLOSED old socket -1
*Nov 30 09:15:34.869 UTC: ephone-1[1]:***Force device subtype to 0
*Nov 30 09:15:34.869 UTC: ephone-1[1]:phone SEP000A8A93E0F9 re-associate OK on s
ocket [1]
*Nov 30 09:15:34.869 UTC: %IPPHONE-6-REGISTER: ephone-1:SEP000A8A93E0F9 IP:172.1
6.2.101 Socket:1 DeviceType:Phone has registered.
*Nov 30 09:15:34.869 UTC: Phone
Reset/Restart-all looking for phones registered as type 20000 7905   0 socket 1
*Nov 30 09:15:34.869 UTC: Skinny Local IP address = 172.16.2.211 on port 2000

*Nov 30 09:15:34.869 UTC: Skinny Phone IP address = 172.16.2.101 50230
*Nov 30 09:15:34.869 UTC: ephone-1[1]:Signal protocol ver 5 to phone with ver 6
*Nov 30 09:15:34.869 UTC: ephone-1[1]:Date Format M/D/Y
*Nov 30 09:15:34.869 UTC: ephone-1[1]:RegisterAck sent to ephone 1: keepalive pe
riod 30 use sccp-version 5
*Nov 30 09:15:34.873 UTC: ephone-1[1]:CapabilitiesReq sent
*Nov 30 09:15:35.125 UTC: ephone-1[1]:CapabilitiesRes received
*Nov 30 09:15:35.125 UTC: ephone-1[1]:Caps list 7
WideBand_256K  120 ms
G711Ulaw64k  40 ms
G711Alaw64k  40 ms
G729AnnexB  60 ms
G729AnnexAwAnnexB  60 ms
G729  60 ms
G729AnnexA  60 ms

*Nov 30 09:15:35.125 UTC: ephone-1[1]:ButtonTemplateReqMessage
*Nov 30 09:15:35.
Reset/Restart-all looking for phones registered as type 30008 7902  125 UTC: eph
one-1[1]:CheckAutoReg
*Nov 30 09:15:35.125 UTC: ephone-1[1]:AutoReg is disabled
*Nov 30 09:15:35.125 UTC: ephone-1[1][SEP000A8A93E0F9]:Setting 6 lines 0 speed-d
ials on phone (max_line 6)
*Nov 30 09:15:35.125 UTC: ephone-1[1]:First Speed Dial Button location is 0 (0)
*Nov 30 09:15:35.125 UTC: ephone-1[1]:Configured 0 speed dial buttons
*Nov 30 09:15:35.125 UTC: ephone-1[1]:ButtonTemplate lines=6 speed=0 buttons=6 o
ffset=0
*Nov 30 09:15:35.381 UTC: ephone-1[1]:StationSoftKeyTemplateReqMessage
*Nov 30 09:15:35.381 UTC: ephone-1[1]:StationSoftKeyTemplateResMessage
*Nov 30 09:15:35.633 UTC: ephone-1[1]:StationSoftKeySetReqMessage
*Nov 30 09:15:35.633 UTC: ephone-1[1]:Removed SkPark key
*Nov 30 09:15:35.633 UTC: ephone-1[1]:StationSoftKeySetResMessage
*Nov 30 09:15:3
Reset/Restart-all looking for phones registered as type 30007 7912  5.885 UTC: e
phone-1[1]:StationLineStatReqMessage from ephone line 6
*Nov 30 09:15:35.885 UTC: ephone-1[1][SEP000A8A93E0F9]:StationLineStatReqMessage
 from ephone line 6 Invalid DN 0
*Nov 30 09:15:35.885 UTC: ephone-1[1][SEP000A8A93E0F9]:StationLineStatResMessage
 sent to ephone (1 of 6)
*Nov 30 09:15:36.137 UTC: ephone-1[1]:StationLineStatReqMessage from ephone line
 5
*Nov 30 09:15:36.137 UTC: ephone-1[1][SEP000A8A93E0F9]:StationLineStatReqMessage
 from ephone line 5 Invalid DN 0
*Nov 30 09:15:36.137 UTC: ephone-1[1][SEP000A8A93E0F9]:StationLineStatResMessage
 sent to ephone (2 of 6)
*Nov 30 09:15:36.389 UTC: ephone-1[1]:StationLineStatReqMessage from ephone line
 4
*Nov 30 09:15:36.389 UTC: ephone-1[1][SEP000A8A93E0F9]:StationLineStatReqMessage
 from ephone line 4 Invalid DN 0
*Nov 30 09:15:36.38
Reset/Restart-all looking for phones registered as type 30002 7920  9 UTC: ephon
e-1[1][SEP000A8A93E0F9]:StationLineStatResMessage sent to ephone (3 of 6)
*Nov 30 09:15:36.641 UTC: ephone-1[1]:StationLineStatReqMessage from ephone line
 3
*Nov 30 09:15:36.641 UTC: ephone-1[1][SEP000A8A93E0F9]:StationLineStatReqMessage
 from ephone line 3 Invalid DN 0
*Nov 30 09:15:36.641 UTC: ephone-1[1][SEP000A8A93E0F9]:StationLineStatResMessage
 sent to ephone (4 of 6)
*Nov 30 09:15:36.893 UTC: ephone-1[1]:StationLineStatReqMessage from ephone line
 2
*Nov 30 09:15:36.893 UTC: ephone-1[1][SEP000A8A93E0F9]:StationLineStatReqMessage
 from ephone line 2 Invalid DN 0
*Nov 30 09:15:36.893 UTC: ephone-1[1][SEP000A8A93E0F9]:StationLineStatResMessage
 sent to ephone (5 of 6)
*Nov 30 09:15:37.145 UTC: ephone-1[1]:StationLineStatReqMessage from ephone line
 1
*Nov 30 09:15:37.145 UTC: ephon
Reset/Restart-all looking for phones registered as type 30016 CIPC  e-1[1]:Stati
onLineStatReqMessage ephone line 1 DN 1 = 7001 desc = 7001 label =
*Nov 30 09:15:37.145 UTC: ephone-1[1][SEP000A8A93E0F9]:StationLineStatResMessage
 sent to ephone (6 of 6)
*Nov 30 09:15:37.145 UTC: ephone-1[1]:SkinnyCompleteRegistration
*Nov 30 09:15:37.221 UTC: TFTP: Looking for SEP000A8A93E0F9.cnf.xml
*Nov 30 09:15:37.221 UTC: TFTP: Opened system:/its/XMLDefault7960.cnf.xml, fd 0,
 size 788 for process 216
*Nov 30 09:15:37.221 UTC: TFTP: Looking for RINGLIST.XML
*Nov 30 09:15:37.241 UTC: TFTP: Finished system:/its/XMLDefault7960.cnf.xml, tim
e 00:00:00 for process 216
*Nov 30 09:15:37.245 UTC: TFTP: Looking for DISTINCTIVERINGLIST.XML
*Nov 30 09:15:37.409 UTC: ephone-1[1]:Skinny Available Lines 6 set for socket [1
]
*Nov 30 09:15:37.409 UTC: ephone-1[1]:Already d
Reset/Restart-all looking for phones registered as type 30006 7970  one SkinnyCo
mpleteRegistration
Reset/Restart-all looking for phones registered as type 119 7971
Reset/Restart-all looking for phones registered as type 115 7941
Reset/Restart-all looking for phones registered as type 308 7961GE
Reset/Restart-all looking for phones registered as type 309 7941GE
Reset/Restart-all looking for phones registered as type 307 7911
Reset/Restart-all looking for phones registered as type 302 7985
Reset/Restart-all looking for phones registered as type 30018 7961
Reset/Restart-all looking for phones registered as type 30019 7936
Reset/Restart-all looking for phones registered as type 12 ATA Phone
Reset/Restart-all looking for phones registered as type 30027 SCCP Gateway (AN)
Reset/Restart-all looking for phones registered as type 30028 SCCP Gateway (BRI)

Reset/Restart-all looking for phones registered as type 9 7935
Reset/Restart-all looking for phones registered as type 1 30SP+
Reset/Restart-all looking for phones registered as type 2 12SP+
Reset/Restart-all looking for phones registered as type 3 12SP
Reset/Restart-all looking for phones registered as type 4 12
Reset/Restart-all looking for phones registered as type 5 30VIP
Reset/Restart-all looking for phones registered as type 80 Unity Voice Port
Reset/Restart-all looking for phones registered as type 21 Unity Voice Port
Reset/Restart-all looking for phones registered as type -1 Unknown -1
Reset-All issued for 1 phones
 45 seconds (wait for last phone to re-register)

Observação: durante uma atualização, se o LCD de um telefone IP da Cisco exibir Arquivo Não Encontrado, isso pode indicar uma tentativa de carregar uma imagem não assinada em um telefone IP da Cisco que já tem uma imagem assinada.