ASR 9000 - VPLS LSM begrijpen en configureren
Inhoud
Inleiding
Dit document beschrijft Virtual Private LAN Service (VPLS) Label Switched Multicast (LSM) voor de Aggregation Services Router (ASR) 9000 Series waarop Cisco IOS® XR-software wordt uitgevoerd.
Voorwaarden
Vereisten
Er zijn geen specifieke vereisten van toepassing op dit document.
Gebruikte componenten
Dit document is niet beperkt tot specifieke software- en hardware-versies.
De informatie in dit document is gebaseerd op de apparaten in een specifieke laboratoriumomgeving. Alle apparaten die in dit document worden beschreven, hadden een opgeschoonde (standaard)configuratie. Als uw netwerk live is, moet u de potentiële impact van elke opdracht begrijpen.
VPLS Label Switched Multicast (LSM) - Overzicht
VPLS emuleert LAN-services over een Multiprotocol Label Switching (MPLS) kern. Er is een volledig netwerk van point-to-point (P2P) pseudowires (PW’s) ingesteld tussen alle routers van Provider Edge (PE) die deelnemen aan een VPLS-domein om VPLS-emulatie te bieden. De uitzending, multicast, en het onbekende unicastverkeer worden overstroomd in een domein VPLS aan alle PEs. Ingress-replicatie wordt gebruikt om dat overstroomde verkeer via elk P2P-PW naar alle externe PE-routers te sturen die deel uitmaken van hetzelfde VPLS-domein.
Nadelen van ingress replicatie
- Ingress-replicatie is een inefficiënte bandbreedte omdat hetzelfde pakket meerdere keren over dezelfde link verzonden kan worden voor elke P2P PW.
- Ingress-replicatie kan resulteren in aanzienlijk verspilde linkbandbreedte wanneer er veel uitzending en multicast VPLS-verkeer is.
- Ingress-replicatie is ook zeer arbeidsintensief omdat de IP-toegangsrouter de volledige last van de replicatie draagt.
VPLS LSM-functies
VPLS is een breed geïmplementeerde serviceprovider L2VPN-technologie die ook wordt gebruikt voor multicast transport. Hoewel L2 technologie het mogelijk maakt om snuffelen te gebruiken om replicatie van multicast verkeer naar L2 pseudowires te optimaliseren, blijft de kern onafhankelijk van multicast verkeer. Als resultaat hiervan, meerdere kopieën van dezelfde flow traverse core netwerken. Om deze inefficiëntie te verminderen, koppel LSM met VPLS om LSM multicast bomen over de kern te introduceren. In Cisco IOS-XR-softwarerelease 5.1.0 implementeert Cisco ASR 9000 Series VPLS LSM met point-to-multipoint traffic engineering (P2MP-TE) inclusieve bomen. VPLS-eindpunten worden automatisch gedetecteerd en P2MP-TE-bomen worden ingesteld met behulp van Resource Reservation Protocol Traffic Engineering (RSVP-TE) zonder operationele interventie.
- VPLS LSM overbrugt de nadelen van toegangsreplicatie.
- De VPLS LSM-oplossing maakt gebruik van P2MP LSP’s in de MPLS-kern om broadcast-, multicast- en onbekend unicastverkeer voor een VPLS-domein te transporteren.
- P2MP LSP’s maken replicatie in het MPLS-netwerk mogelijk bij de meest optimale knooppunt en minimaliseren de hoeveelheid pakketrelicatie in het netwerk.
- De VPLS LSM-oplossing verstuurt alleen overstroomd VPLS-verkeer via P2MP LSP’s.
- Unicast VPLS-verkeer wordt nog steeds verzonden via P2P-PW’s. Verkeer dat via Access-PW’s wordt verzonden, wordt nog steeds met toegangsreplicatie verzonden.
- P2MP-PW’s zijn unidirectioneel tegenover P2P-PW’s, die bidirectioneel zijn.
- De VPLS LSM-oplossing omvat de creatie van een P2MP PW per VPLS-domein om een VPLS P2MP-service voor kern-PW’s in het VPLS-domein na te bootsen.
- VPLS LSM wordt ondersteund in Cisco IOS XR release 5.1.0 en hoger.
VPLS LSM-beperkingen
- Cisco IOS-XR release 5.1.0 VPLS LSM-functionaliteit ondersteunt alleen MPLS Traffic Engineering P2MP-TE-bomen die met RSVP-TE zijn geïnstalleerd.
- Een P2MP-PW kan alleen met het BGP-protocol worden gesignaleerd in Cisco IOS-XR release 5.1.0. In deze eerste fase worden de externe PE's die deelnemen aan het VPLS-domein automatisch ontdekt met BGP Auto-Discovery (BGP-AD).
- Statische LDP-signalering wordt niet ondersteund in Cisco IOS XR release 5.1.0.
Media Access Control (MAC) learning
MAC leren op het blad PE voor een frame dat aankomt op P2MP PW wordt gedaan alsof het frame wordt ontvangen op de P2P PW leidend tot de root PE voor die P2MP PW. In dit beeld wordt MAC Learning op PE-2 voor frames die aankomen op de P2MP PW LSP geworteld in PE-1 gedaan alsof het frame aankwam op de P2P PW tussen PE-1 en PE-2. Het L2VPN-besturingsplane is verantwoordelijk voor het programmeren van de VPLS-dispositieinformatie met P2P PW-informatie voor MAC-leren over de P2MP LSP-dispositie.
Ondersteuning van Internet Group Management Protocol Snooping (IGMP)
IGMP-snooping (Internet Group Management Protocol) wordt ondersteund op zowel de kop als de staart van de P2MP-structuur in een brugdomein dat deelneemt aan VPLS LSM. Hierdoor kan IGMPLS multicast-verkeer via een VFI-PW (Virtual Forwarding Instance) profiteren van de optimalisatie van resources die door P2MP-LSP’s wordt geboden. Als IGMPSN is ingeschakeld in een brugdomein met een of meer VFI-PW’s die deelnemen aan VPLS LSM, wordt al het Layer 2 (L2) multicast-verkeer over het P2MP P-boomhoofd verzonden dat is gekoppeld aan het brugdomein. L2 multicast routes worden gebruikt om verkeer door te sturen naar lokale ontvangers, Ethernet Flow Points (EFP’s), toegang tot PW’s en VFI-PW’s die niet deelnemen aan VPLS LSM.
Wanneer IGMPSN is ingeschakeld in een brugdomein dat een P2MP LSP-staart is, wordt geoptimaliseerde verwerking van L2 multicast-verkeer dat op de P2MP LSP wordt ontvangen, uitgevoerd voor lokale ontvangers (dat wil zeggen, Attachment Circuit (AC) Bridge Ports (BP’s) en toegang tot PW BP’s).
Schaal ondersteunde producten
Cisco IOS XR-release 5.1.0 ondersteunt maximaal 1000 P2MP-tunnels of 1000 P2MP PW’s per head/tail-router.
Configuratie VPLS LSM
Configuratie van P2MP Auto Tunnel
mpls traffic-eng
interface GigabitEthernet0/1/1/0
!
interface GigabitEthernet0/1/1/1
!
auto-tunnel p2mp
tunnel-id min 100 max 200
Configuratie MPLS TE Fast Reroute (FRR)
mpls traffic-eng
interface GigabitEthernet0/1/1/0
auto-tunnel backup
nhop-only
!
!
interface GigabitEthernet0/1/1/1
auto-tunnel backup
nhop-only
!
!
auto-tunnel p2mp
tunnel-id min 100 max 200
!
auto-tunnel backup
tunnel-id min 1000 max 1500
!
attribute-set p2mp-te set1
bandwidth 10000
fast-reroute
record-route
!
L2VPN-configuratie
l2vpn
bridge group bg1
bridge-domain bg1_bd1
interface GigabitEthernet0/1/1/10.1
!
vfi bg1_bd1_vfi
vpn-id 1
autodiscovery bgp
rd auto
route-target 209.165.201.1:1
signaling-protocol bgp
ve-id 100
!
!
multicast p2mp
signaling-protocol bgp
!
transport rsvp-te
attribute-set p2mp-te set1
!
Monstertopologie en -configuratie
De P2MP-tunnels zijn automatisch ontdekte tunnels. Statische P2MP-tunnels worden niet ondersteund.
Statische tunnelconfiguraties worden niet gebruikt. De automatische P2MP-tunnelconfiguratie moet worden ingeschakeld op alle PE-routers en ook op een P-router als deze fungeert als knooppunt. Een bud knooppunt is een middelpunt en een tailend router tegelijkertijd.
Een steekproeftopologie met configuratie wordt hier getoond. In deze topologie worden P2MP-PW’s gecreëerd tussen de drie PE’s en een P-router die fungeert als knooppunt. Alle drie PE-routers fungeren als head (voor toegangsverkeer) en Tail (voor uitgaand verkeer).
PE1-configuratie
RP/0/RSP0/CPU0:PE1#show run
hostname PE1
!
ipv4 unnumbered mpls traffic-eng Loopback0
!
interface Loopback0
ipv4 address 209.165.200.225 255.255.255.255
!
interface GigabitEthernet0/1/1/0
description connected P router
ipv4 address 209.165.201.1 255.255.255.224
!
interface GigabitEthernet0/1/1/1
description connected to P router
ipv4 address 209.165.201.151 255.255.255.224
transceiver permit pid all
!
interface GigabitEthernet0/1/1/10
transceiver permit pid all
!
interface GigabitEthernet0/1/1/10.1 l2transport
encapsulation dot1q 1
!
router ospf 100
router-id 209.165.200.225
area 0
mpls traffic-eng
interface Loopback0
!
interface GigabitEthernet0/1/1/0
!
interface GigabitEthernet0/1/1/1
!
!
mpls traffic-eng router-id 209.165.200.225
!
router bgp 100
nsr
bgp router-id 209.165.200.225
bgp graceful-restart
address-family l2vpn vpls-vpws
!
neighbor 209.165.200.226
remote-as 100
update-source Loopback0
address-family l2vpn vpls-vpws
!
!
neighbor 209.165.200.227
remote-as 100
update-source Loopback0
address-family l2vpn vpls-vpws
!
!
neighbor 209.165.200.228
remote-as 100
update-source Loopback0
address-family l2vpn vpls-vpws
!
!
!
l2vpn
bridge group bg1
bridge-domain bg1_bd1
interface GigabitEthernet0/1/1/10.1
!
vfi bg1_bd1_vfi
vpn-id 1
autodiscovery bgp
rd auto
route-target 209.165.201.1:1
signaling-protocol bgp
ve-id 100
!
!
multicast p2mp
signaling-protocol bgp
!
transport rsvp-te
attribute-set p2mp-te set1
!
!
!
!
!
!
rsvp
interface GigabitEthernet0/1/1/0
bandwidth 100000
!
interface GigabitEthernet0/1/1/1
bandwidth 100000
!
!
mpls traffic-eng
interface GigabitEthernet0/1/1/0
auto-tunnel backup
nhop-only
!
!
interface GigabitEthernet0/1/1/1
auto-tunnel backup
nhop-only
!
!
auto-tunnel p2mp
tunnel-id min 100 max 200
!
auto-tunnel backup
tunnel-id min 1000 max 1500
!
attribute-set p2mp-te set1
bandwidth 10000
fast-reroute
record-route
!
!
mpls ldp
nsr
graceful-restart
router-id 209.165.200.225
interface GigabitEthernet0/1/1/0
!
interface GigabitEthernet0/1/1/1
!
!
end
RP/0/RSP0/CPU0:PE1#
IP-configuratie
RP/0/RSP0/CPU0:P#show run
hostname P
ipv4 unnumbered mpls traffic-eng Loopback0
interface Loopback0
ipv4 address 209.165.200.226 255.255.255.255
!
interface GigabitEthernet0/1/1/0
description connected to PE1 router
ipv4 address 209.165.201.2 255.255.255.224
transceiver permit pid all
!
interface GigabitEthernet0/1/1/1
description connected to PE1 router
ipv4 address 209.165.201.152 255.255.255.224
transceiver permit pid all
!
interface GigabitEthernet0/1/1/3
description connected to PE2 router
ipv4 address 209.165.201.61 255.255.255.224
!
interface GigabitEthernet0/1/1/4
transceiver permit pid all
!
interface GigabitEthernet0/1/1/4.1 l2transport
encapsulation dot1q 1
!
interface GigabitEthernet0/1/1/8
description connected to PE3 router
ipv4 address 209.165.201.101 255.255.255.224
!
router ospf 100
nsr
nsf cisco
area 0
mpls traffic-eng
interface Loopback0
!
interface GigabitEthernet0/1/1/0
!
interface GigabitEthernet0/1/1/1
!
interface GigabitEthernet0/1/1/3
!
interface GigabitEthernet0/1/1/8
!
!
mpls traffic-eng router-id 209.165.200.226
!
router bgp 100
nsr
bgp router-id 209.165.200.226
bgp graceful-restart
address-family l2vpn vpls-vpws
!
neighbor 209.165.200.225
remote-as 100
update-source Loopback0
address-family l2vpn vpls-vpws
!
!
neighbor 209.165.200.227
remote-as 100
update-source Loopback0
address-family l2vpn vpls-vpws
!
!
neighbor 209.165.200.228
remote-as 100
update-source Loopback0
address-family l2vpn vpls-vpws
!
!
!
l2vpn
bridge group bg1
bridge-domain bg1_bd1
interface GigabitEthernet0/1/1/4.1
!
vfi bg1_bd1_vfi
vpn-id 1
autodiscovery bgp
rd auto
route-target 209.165.201.1:1
signaling-protocol bgp
ve-id 200
!
!
multicast p2mp
signaling-protocol bgp
!
transport rsvp-te
attribute-set p2mp-te set1
!
!
!
!
!
!
rsvp
interface GigabitEthernet0/1/1/0
bandwidth 100000
!
interface GigabitEthernet0/1/1/1
bandwidth 100000
!
interface GigabitEthernet0/1/1/3
bandwidth 100000
!
interface GigabitEthernet0/1/1/8
bandwidth 100000
!
!
mpls traffic-eng
interface GigabitEthernet0/1/1/0
auto-tunnel backup
nhop-only
!
!
interface GigabitEthernet0/1/1/1
auto-tunnel backup
nhop-only
!
!
interface GigabitEthernet0/1/1/3
!
interface GigabitEthernet0/1/1/8
!
auto-tunnel p2mp
tunnel-id min 100 max 200
!
auto-tunnel backup
tunnel-id min 1000 max 1500
!
attribute-set p2mp-te set1
bandwidth 10000
fast-reroute
record-route
!
!
mpls ldp
nsr
graceful-restart
router-id 209.165.200.226
interface GigabitEthernet0/1/1/0
!
interface GigabitEthernet0/1/1/1
!
interface GigabitEthernet0/1/1/3
!
interface GigabitEthernet0/1/1/8
!
!
end
RP/0/RSP0/CPU0:P#
PE2-configuratie
RP/0/RSP0/CPU0:PE2#show run
hostname PE2
ipv4 unnumbered mpls traffic-eng Loopback0
interface Loopback0
ipv4 address 209.165.200.227 255.255.255.255
!
interface GigabitEthernet0/3/0/2.1 l2transport
encapsulation dot1q 1
!
interface GigabitEthernet0/3/0/3
description connected to P router
ipv4 address 209.165.201.62 255.255.255.224
transceiver permit pid all
!
router ospf 100
nsr
router-id 209.165.200.227
nsf cisco
area 0
mpls traffic-eng
interface Loopback0
!
interface GigabitEthernet0/3/0/3
!
!
mpls traffic-eng router-id 209.165.200.227
!
router bgp 100
nsr
bgp router-id 209.165.200.227
bgp graceful-restart
address-family l2vpn vpls-vpws
!
neighbor 209.165.200.225
remote-as 100
update-source Loopback0
address-family l2vpn vpls-vpws
!
!
neighbor 209.165.200.226
remote-as 100
update-source Loopback0
address-family l2vpn vpls-vpws
!
!
neighbor 209.165.200.228
remote-as 100
update-source Loopback0
address-family l2vpn vpls-vpws
!
!
!
l2vpn
bridge group bg1
bridge-domain bg1_bd1
interface GigabitEthernet0/3/0/2.1
!
vfi bg1_bd1_vfi
vpn-id 1
autodiscovery bgp
rd auto
route-target 209.165.201.1:1
signaling-protocol bgp
ve-id 300
!
!
multicast p2mp
signaling-protocol bgp
!
transport rsvp-te
attribute-set p2mp-te set1
!
!
!
!
!
!
rsvp
interface GigabitEthernet0/3/0/3
bandwidth 100000
!
!
mpls traffic-eng
interface GigabitEthernet0/3/0/3
!
auto-tunnel p2mp
tunnel-id min 100 max 200
!
auto-tunnel backup
tunnel-id min 1000 max 1500
!
attribute-set p2mp-te set1
bandwidth 10000
fast-reroute
record-route
!
!
mpls ldp
nsr
graceful-restart
router-id 209.165.200.227
interface GigabitEthernet0/3/0/3
!
!
end
RP/0/RSP0/CPU0:PE2#
PE3-configuratie
RP/0/RSP0/CPU0:PE3#show run
hostname PE3
ipv4 unnumbered mpls traffic-eng Loopback0
interface Loopback0
ipv4 address 209.165.200.228 255.255.255.255
!
interface GigabitEthernet0/2/1/8
description connected to P router
ipv4 address 209.165.201.102 255.255.255.224
transceiver permit pid all
!
interface GigabitEthernet0/2/1/11
transceiver permit pid all
!
interface GigabitEthernet0/2/1/11.1 l2transport
encapsulation dot1q 1
!
router ospf 100
nsr
router-id 209.165.200.228
nsf cisco
area 0
mpls traffic-eng
interface Loopback0
!
interface GigabitEthernet0/2/1/8
!
!
mpls traffic-eng router-id 209.165.200.228
!
router bgp 100
nsr
bgp router-id 209.165.200.228
bgp graceful-restart
address-family l2vpn vpls-vpws
!
neighbor 209.165.200.225
remote-as 100
update-source Loopback0
address-family l2vpn vpls-vpws
!
!
neighbor 209.165.200.226
remote-as 100
update-source Loopback0
address-family l2vpn vpls-vpws
!
!
neighbor 209.165.200.227
remote-as 100
update-source Loopback0
address-family l2vpn vpls-vpws
!
!
!
l2vpn
bridge group bg1
bridge-domain bg1_bd1
interface GigabitEthernet0/2/1/11.1
!
vfi bg1_bd1_vfi
vpn-id 1
autodiscovery bgp
rd auto
route-target 209.165.201.1:1
signaling-protocol bgp
ve-id 400
!
!
multicast p2mp
signaling-protocol bgp
!
transport rsvp-te
attribute-set p2mp-te set1
!
!
!
!
!
!
rsvp
interface GigabitEthernet0/2/1/8
bandwidth 1000000
!
!
mpls traffic-eng
interface GigabitEthernet0/2/1/8
!
auto-tunnel p2mp
tunnel-id min 100 max 200
!
auto-tunnel backup
tunnel-id min 1000 max 1500
!
attribute-set p2mp-te set1
bandwidth 10000
fast-reroute
record-route
!
!
mpls ldp
nsr
graceful-restart
router-id 209.165.200.228
interface GigabitEthernet0/2/1/8
!
!
end
RP/0/RSP0/CPU0:PE3#
Verifiëren - Opdrachten weergeven
Deze showopdrachten zijn handig om de status van de P2MP PW- en P2MP MPLS TE-tunnels te debuggen en te verifiëren.
- het l2vpn bridge-domein weergeven
- details van l2vpn bridge-domein weergeven
- toon mpls traffic-engtunnels p2mp
- tonen mpls door:sturen labels <label> detail
- toon mpls traffic-eng tunnels p2mp tabulair
Hier volgen enkele voorbeelden:
show l2vpn bridge-domain
RP/0/RSP0/CPU0:PE1#show l2vpn bridge-domain
Legend: pp = Partially Programmed.
Bridge group: bg1, bridge-domain: bg1_bd1, id: 0, state: up, ShgId: 0, MSTi: 0
Aging: 300 s, MAC limit: 4000, Action: none, Notification: syslog
Filter MAC addresses: 0
ACs: 1 (1 up), VFIs: 1, PWs: 3 (3 up), PBBs: 0 (0 up)
List of ACs:
GigabitEthernet0/1/1/10.1, state: up, Static MAC addresses: 0
List of Access PWs:
List of VFIs:
VFI bg1_bd1_vfi (up)
P2MP: RSVP-TE, BGP, 1, Tunnel Up
Neighbor 209.165.200.226 pw-id 1, state: up, Static MAC addresses: 0
Neighbor 209.165.200.227 pw-id 1, state: up, Static MAC addresses: 0
Neighbor 209.165.200.228 pw-id 1, state: up, Static MAC addresses: 0
RP/0/RSP0/CPU0:PE1#
show l2vpn bridge-domain detail
RP/0/RSP0/CPU0:PE1#show l2vpn bridge-domain detail
Legend: pp = Partially Programmed.
Bridge group: bg1, bridge-domain: bg1_bd1, id: 0, state: up, ShgId: 0, MSTi: 0
Coupled state: disabled
MAC learning: enabled
MAC withdraw: enabled
MAC withdraw for Access PW: enabled
MAC withdraw sent on: bridge port up
MAC withdraw relaying (access to access): disabled
Flooding:
Broadcast & Multicast: enabled
Unknown unicast: enabled
MAC aging time: 300 s, Type: inactivity
MAC limit: 4000, Action: none, Notification: syslog
MAC limit reached: no
MAC port down flush: enabled
MAC Secure: disabled, Logging: disabled
Split Horizon Group: none
Dynamic ARP Inspection: disabled, Logging: disabled
IP Source Guard: disabled, Logging: disabled
DHCPv4 snooping: disabled
IGMP Snooping: enabled
IGMP Snooping profile: none
MLD Snooping profile: none
Storm Control: disabled
Bridge MTU: 1500
MIB cvplsConfigIndex: 1
Filter MAC addresses:
P2MP PW: enabled
Create time: 18/02/2014 03:47:59 (00:41:54 ago)
No status change since creation
ACs: 1 (1 up), VFIs: 1, PWs: 3 (3 up), PBBs: 0 (0 up)
List of ACs:
AC: GigabitEthernet0/1/1/10.1, state is up
Type VLAN; Num Ranges: 1
VLAN ranges: [1, 1]
MTU 1504; XC ID 0x8802a7; interworking none
MAC learning: enabled
Flooding:
Broadcast & Multicast: enabled
Unknown unicast: enabled
MAC aging time: 300 s, Type: inactivity
MAC limit: 4000, Action: none, Notification: syslog
MAC limit reached: no
MAC port down flush: enabled
MAC Secure: disabled, Logging: disabled
Split Horizon Group: none
Dynamic ARP Inspection: disabled, Logging: disabled
IP Source Guard: disabled, Logging: disabled
DHCPv4 snooping: disabled
IGMP Snooping: enabled
IGMP Snooping profile: none
MLD Snooping profile: none
Storm Control: disabled
Static MAC addresses:
Statistics:
packets: received 0, sent 0
bytes: received 0, sent 0
Storm control drop counters:
packets: broadcast 0, multicast 0, unknown unicast 0
bytes: broadcast 0, multicast 0, unknown unicast 0
Dynamic ARP inspection drop counters:
packets: 0, bytes: 0
IP source guard drop counters:
packets: 0, bytes: 0
List of Access PWs:
List of VFIs:
VFI bg1_bd1_vfi (up)
P2MP:
Type RSVP-TE, BGP signaling, PTree ID 1
P2MP Status: Tunnel Up
P2MP-TE attribute-set: set1
Tunnel tunnel-mte100, Local Label: 289994
VPN-ID: 1, Auto Discovery: BGP, state is Provisioned (Service Connected)
Route Distinguisher: (auto) 209.165.200.225:32768
Import Route Targets:
209.165.201.1:1
Export Route Targets:
209.165.201.1:1
Signaling protocol: BGP
Local VE-ID: 100 , Advertised Local VE-ID : 100
VE-Range: 10
PW: neighbor 209.165.200.226, PW ID 1, state is up ( established )
PW class not set, XC ID 0xc0000001
Encapsulation MPLS, Auto-discovered (BGP), protocol BGP
Source address 209.165.200.225
PW type VPLS, control word disabled, interworking none
Sequencing not set
MPLS Local Remote
------------ ------------------------------ -------------------------
Label 289959 16030
MTU 1500 1500
Control word disabled disabled
PW type VPLS VPLS
VE-ID 100 200
------------ ------------------------------ -------------------------
MIB cpwVcIndex: 3221225473
Create time: 18/02/2014 03:58:31 (00:31:23 ago)
Last time status changed: 18/02/2014 03:58:31 (00:31:23 ago)
MAC withdraw messages: sent 0, received 0
Static MAC addresses:
Statistics:
packets: received 0, sent 0
bytes: received 0, sent 0
Storm control drop counters:
packets: broadcast 0, multicast 0, unknown unicast 0
bytes: broadcast 0, multicast 0, unknown unicast 0
DHCPv4 snooping: disabled
IGMP Snooping profile: none
MLD Snooping profile: none
P2MP-PW:
FEC Local Remote
-------------- ----------------------------- ----------------------
Label NULL (inclusive tree) NULL (inclusive tree)
P2MP ID 100 100
Flags 0x00 0x00
PTree Type RSVP-TE RSVP-TE
Tunnel ID 100 100
Ext. Tunnel ID 209.165.200.225 209.165.200.226
Statistics:
packets: received 0
bytes: received 0
PW: neighbor 209.165.200.227, PW ID 1, state is up ( established )
PW class not set, XC ID 0xc0000002
Encapsulation MPLS, Auto-discovered (BGP), protocol BGP
Source address 209.165.200.225
PW type VPLS, control word disabled, interworking none
Sequencing not set
MPLS Local Remote
------------ ------------------------------ -------------------------
Label 289944 16030
MTU 1500 1500
Control word disabled disabled
PW type VPLS VPLS
VE-ID 100 300
------------ ------------------------------ -------------------------
MIB cpwVcIndex: 3221225474
Create time: 18/02/2014 04:05:25 (00:24:29 ago)
Last time status changed: 18/02/2014 04:05:25 (00:24:29 ago)
MAC withdraw messages: sent 0, received 0
Static MAC addresses:
Statistics:
packets: received 0, sent 0
bytes: received 0, sent 0
Storm control drop counters:
packets: broadcast 0, multicast 0, unknown unicast 0
bytes: broadcast 0, multicast 0, unknown unicast 0
DHCPv4 snooping: disabled
IGMP Snooping profile: none
MLD Snooping profile: none
P2MP-PW:
FEC Local Remote
-------------- ----------------------------- ----------------------
Label NULL (inclusive tree) NULL (inclusive tree)
P2MP ID 100 100
Flags 0x00 0x00
PTree Type RSVP-TE RSVP-TE
Tunnel ID 100 100
Ext. Tunnel ID 209.165.200.225 209.165.200.227
Statistics:
packets: received 0
bytes: received 0
PW: neighbor 209.165.200.228, PW ID 1, state is up ( established )
PW class not set, XC ID 0xc0000003
Encapsulation MPLS, Auto-discovered (BGP), protocol BGP
Source address 209.165.200.225
PW type VPLS, control word disabled, interworking none
Sequencing not set
MPLS Local Remote
------------ ------------------------------ -------------------------
Label 289929 16045
MTU 1500 1500
Control word disabled disabled
PW type VPLS VPLS
VE-ID 100 400
------------ ------------------------------ -------------------------
MIB cpwVcIndex: 3221225475
Create time: 18/02/2014 04:08:11 (00:21:43 ago)
Last time status changed: 18/02/2014 04:08:11 (00:21:43 ago)
MAC withdraw messages: sent 0, received 0
Static MAC addresses:
Statistics:
packets: received 0, sent 0
bytes: received 0, sent 0
Storm control drop counters:
packets: broadcast 0, multicast 0, unknown unicast 0
bytes: broadcast 0, multicast 0, unknown unicast 0
DHCPv4 snooping: disabled
IGMP Snooping profile: none
MLD Snooping profile: none
P2MP-PW:
FEC Local Remote
-------------- ----------------------------- ----------------------
Label NULL (inclusive tree) NULL (inclusive tree)
P2MP ID 100 100
Flags 0x00 0x00
PTree Type RSVP-TE RSVP-TE
Tunnel ID 100 100
Ext. Tunnel ID 209.165.200.225 209.165.200.228
Statistics:
packets: received 0
bytes: received 0
VFI Statistics:
drops: illegal VLAN 0, illegal length 0
RP/0/RSP0/CPU0:PE1#
show mpls traffic-eng tunnels p2mp
RP/0/RSP0/CPU0:PE1#show mpls traffic-eng tunnels p2mp
Name: tunnel-mte100 (auto-tunnel for VPLS (l2vpn))
Signalled-Name: auto_PE1_mt100
Status:
Admin: up Oper: up (Up for 00:32:35)
Config Parameters:
Bandwidth: 0 kbps (CT0) Priority: 7 7 Affinity: 0x0/0xffff
Interface Bandwidth: 10000 kbps
Metric Type: TE (default)
Fast Reroute: Enabled, Protection Desired: Any
Record Route: Enabled
Reoptimization after affinity failure: Enabled
Attribute-set: set1 (type p2mp-te)
Destination summary: (3 up, 0 down, 0 disabled) Affinity: 0x0/0xffff
Auto-bw: disabled
Destination: 209.165.200.226
State: Up for 00:32:35
Path options:
path-option 10 dynamic [active]
Destination: 209.165.200.227
State: Up for 00:25:41
Path options:
path-option 10 dynamic [active]
Destination: 209.165.200.228
State: Up for 00:22:55
Path options:
path-option 10 dynamic [active]
Current LSP:
lsp-id: 10004 p2mp-id: 100 tun-id: 100 src: 209.165.200.225 extid:
209.165.200.225
LSP up for: 00:32:35 (since Tue Feb 18 03:58:31 UTC 2014)
Reroute Pending: No
Inuse Bandwidth: 0 kbps (CT0)
Number of S2Ls: 3 connected, 0 signaling proceeding, 0 down
S2L Sub LSP: Destination 209.165.200.226 Signaling Status: connected
S2L up for: 00:32:35 (since Tue Feb 18 03:58:31 UTC 2014)
Sub Group ID: 1 Sub Group Originator ID: 209.165.200.225
Path option path-option 10 dynamic (path weight 1)
Path info (OSPF 100 area 0)
209.165.201.2
209.165.200.226
S2L Sub LSP: Destination 209.165.200.227 Signaling Status: connected
S2L up for: 00:25:41 (since Tue Feb 18 04:05:25 UTC 2014)
Sub Group ID: 2 Sub Group Originator ID: 209.165.200.225
Path option path-option 10 dynamic (path weight 2)
Path info (OSPF 100 area 0)
209.165.201.2
209.165.201.61
209.165.201.62
209.165.200.227
S2L Sub LSP: Destination 209.165.200.228 Signaling Status: connected
S2L up for: 00:22:55 (since Tue Feb 18 04:08:11 UTC 2014)
Sub Group ID: 4 Sub Group Originator ID: 209.165.200.225
Path option path-option 10 dynamic (path weight 2)
Path info (OSPF 100 area 0)
209.165.201.2
209.165.201.101
209.165.201.102
209.165.200.228
Reoptimized LSP (Install Timer Remaining 0 Seconds):
None
Cleaned LSP (Cleanup Timer Remaining 0 Seconds):
None
LSP Tunnel 209.165.200.226 100 [10005] is signalled, connection is up
Tunnel Name: auto_P_mt100 Tunnel Role: Tail
InLabel: GigabitEthernet0/1/1/0, 289995
Signalling Info:
Src 209.165.200.226 Dst 209.165.200.225, Tun ID 100, Tun Inst 10005, Ext ID
209.165.200.226
Router-IDs: upstream 209.165.200.226
local 209.165.200.225
Bandwidth: 0 kbps (CT0) Priority: 7 7 DSTE-class: 0
Soft Preemption: None
Path Info:
Incoming Address: 209.165.201.1
Incoming:
Explicit Route:
Strict, 209.165.201.1
Strict, 209.165.200.225
Record Route:
IPv4 209.165.201.2, flags 0x0
Tspec: avg rate=0 kbits, burst=1000 bytes, peak rate=0 kbits
Session Attributes: Local Prot: Set, Node Prot: Not Set, BW Prot: Not Set
Soft Preemption Desired: Not Set
Resv Info: None
Record Route: Empty
Resv Info:
Record Route: Empty
Fspec: avg rate=0 kbits, burst=1000 bytes, peak rate=0 kbits
LSP Tunnel 209.165.200.227 100 [10003] is signalled, connection is up
Tunnel Name: auto_PE2_mt100 Tunnel Role: Tail
InLabel: GigabitEthernet0/1/1/0, 289998
Signalling Info:
Src 209.165.200.227 Dst 209.165.200.225, Tun ID 100, Tun Inst 10003, Ext ID
209.165.200.227
Router-IDs: upstream 209.165.200.226
local 209.165.200.225
Bandwidth: 0 kbps (CT0) Priority: 7 7 DSTE-class: 0
Soft Preemption: None
Path Info:
Incoming Address: 209.165.201.1
Incoming:
Explicit Route:
Strict, 209.165.201.1
Strict, 209.165.200.225
Record Route:
IPv4 209.165.201.2, flags 0x0
IPv4 209.165.201.62, flags 0x0
Tspec: avg rate=0 kbits, burst=1000 bytes, peak rate=0 kbits
Session Attributes: Local Prot: Set, Node Prot: Not Set, BW Prot: Not Set
Soft Preemption Desired: Not Set
Resv Info: None
Record Route: Empty
Resv Info:
Record Route: Empty
Fspec: avg rate=0 kbits, burst=1000 bytes, peak rate=0 kbits
LSP Tunnel 209.165.200.228 100 [10004] is signalled, connection is up
Tunnel Name: auto_PE3_mt100 Tunnel Role: Tail
InLabel: GigabitEthernet0/1/1/0, 289970
Signalling Info:
Src 209.165.200.228 Dst 209.165.200.225, Tun ID 100, Tun Inst 10004, Ext ID
209.165.200.228
Router-IDs: upstream 209.165.200.226
local 209.165.200.225
Bandwidth: 0 kbps (CT0) Priority: 7 7 DSTE-class: 0
Soft Preemption: None
Path Info:
Incoming Address: 209.165.201.1
Incoming:
Explicit Route:
Strict, 209.165.201.1
Strict, 209.165.200.225
Record Route:
IPv4 209.165.201.2, flags 0x0
IPv4 209.165.201.102, flags 0x0
Tspec: avg rate=0 kbits, burst=1000 bytes, peak rate=0 kbits
Session Attributes: Local Prot: Set, Node Prot: Not Set, BW Prot: Not Set
Soft Preemption Desired: Not Set
Resv Info: None
Record Route: Empty
Resv Info:
Record Route: Empty
Fspec: avg rate=0 kbits, burst=1000 bytes, peak rate=0 kbits
Displayed 1 (of 2) heads, 0 (of 0) midpoints, 3 (of 4) tails
Displayed 1 up, 0 down, 0 recovering, 0 recovered heads
RP/0/RSP0/CPU0:PE1#
show mpls forwarding labels
RP/0/RSP0/CPU0:PE1#show mpls forwarding labels 289994 detail
Local Outgoing Prefix Outgoing Next Hop Bytes
Label Label or ID Interface Switched
------ ----------- ------------------ ------------ --------------- ------------
289994 P2MP TE: 100
Updated Feb 18 03:58:32.360
TE Tunnel Head, tunnel ID: 100, tunnel ifh: 0x8000e20
IPv4 Tableid: 0xe0000000, IPv6 Tableid: 0xe0800000
Flags:IP Lookup:not-set, Expnullv4:not-set, Expnullv6:set
Payload Type v4:set, Payload Type v6:not-set, l2vpn:set
Head:set, Tail:not-set, Bud:not-set, Peek:not-set, inclusive:set
Ingress Drop:not-set, Egress Drop:not-set
Platform Data:{0x2000000, 0x2000000, 0x0, 0x0}, RPF-ID:0x80003
VPLS Disposition: Bridge ID: 0, SHG ID: 0, PW Xconnect ID: 0x0
mpls paths: 1, local mpls paths: 0, protected mpls paths: 1
16005 P2MP TE: 100 Gi0/1/1/0 209.165.201.2 0
Updated Feb 18 03:58:32.360
My Nodeid:65, Interface Nodeid:2065, Backup Interface Nodeid:2065
Packets Switched: 0
RP/0/RSP0/CPU0:PE1#
show mpls traffic-eng tunnels p2mp tabular
RP/0/RSP0/CPU0:PE1#show mpls traffic-eng tunnels p2mp tabular
Tunnel LSP Destination Source FRR LSP Path
Name ID Address Address State State Role Prot
----------------- ----- --------------- --------------- ------ ------ ---- -----
^tunnel-mte100 10004 209.165.200.226 209.165.200.225 up Ready Head
^tunnel-mte100 10004 209.165.200.227 209.165.200.225 up Ready Head
^tunnel-mte100 10004 209.165.200.228 209.165.200.225 up Ready Head
auto_P_mt100 10005 209.165.200.225 209.165.200.226 up Inact Tail
auto_PE2_mt100 10003 209.165.200.225 209.165.200.227 up Inact Tail
auto_PE3_mt100 10004 209.165.200.225 209.165.200.228 up Inact Tail
* = automatically created backup tunnel
^ = automatically created P2MP tunnel
RP/0/RSP0/CPU0:PE1#
Probleemoplossing voor VPLS LSM
Veelvoorkomende configuratieproblemen
De meest voorkomende oorzaken voor P2MP problemen in L2VPN worden hier getoond.
- De BGP-configuratie voor LSM is precies hetzelfde als die voor BGP-AD. Zorg ervoor dat u L2vpn vpls-vpws adresfamilieroutes exporteert/importeert door adresfamilie l2vpn vpls-vpws te configureren voor BGP-buren.
- Er zijn MPLS- en multicast-configuratiefouten.
MPLS Traffic Engineering moet zijn ingeschakeld op de interfaces waar de P2MP-PW’s passeren.mpls traffic-eng
interface gigabit <>
auto-tunnel p2mp
tunnel-id min 100 max 200
Enable multicast-routing for interfaces.
multicast-routing
address-family ipv4
interface all enable - De L2VPN-configuratie voor LSM in Cisco IOS XR-release 5.1.0 vereist dat u:
- De VPN-id-configuratie voor de VFI configureren
- Configureer multicast P2MP voor de VFI. Configuratie van het transportprotocol en het signaleringsprotocol, zoals in deze voorbeeldconfiguratie:
l2vpn
bridge group bg
bridge-domain bd1
vfi vf1
vpn-id 1
autodiscovery bgp
rd auto
route-target 209.165.201.7:1
signaling-protocol bgp
ve-id 1
multicast p2mp
signaling-protocol bgp
transport rsvp-te - De LSM-kop/staart moet correct worden ingesteld. In Cisco IOS XR-release 5.1.0 is elke LSM-staart ook een LSM-head en vice versa. Omdat er geen expliciete LSM-vermogensuitwisseling tussen routers is, moeten alle routers in een LSM-enabled brugdomein aan LSM deelnemen.
L2VPN en L2FIB tonen opdrachten en probleemoplossing
- Het L2VPN-beheerproces (l2vpn_mgr) communiceert met het MPLS Traffic Engineering (TE) controleproces (te_control) en vraagt de tunnelcreatie. Zorg ervoor dat de te_control en l2vpn_mgr processen in de lopende staat zijn met deze opdrachten:
- proces tonen l2vpn_mgr
- toon proces te_control
- Controleer of het l2vpn_mgr-proces om de tunnelcreatie heeft gevraagd. Een ingang voor de tunnel zou in dit showbevel moeten zijn:
RP/0/RSP0/CPU0:PE1#show l2vpn atom-db preferred-path
Tunnel BW Tot/Avail/Resv Peer ID VC ID
----------------------------------------------------------------------
tunnel-mte1 0/0/0 209.165.200.226 1
209.165.200.227 1
209.165.200.228 1 - L2VPN moet de tunnelinformatie van het te_control proces ontvangen. Controleer dat dit showcommando niet-nul details heeft zoals tunnel-id, Ext.tunnel-id, tunnel-ifh en p2mp-id:
RP/0/RSP0/CPU0:PE1#show l2vpn atom-db preferred-path private
Tunnel tunnel-mte1 0/0/0:
Peer ID: 209.165.200.226, VC-ID 1
Peer ID: 209.165.200.227, VC-ID 1
Peer ID: 209.165.200.228, VC-ID 1
MTE details:
tunnel-ifh: 0x08000e20
local-label: 289994
p2mp-id: 100
tunnel-id: 100
Ext.tunnel-id: 209.165.200.225 - L2VPN moet de Provider Multicast Service Instance (PMSI) adverteren naar alle andere PE routers. Controleer of l2vpn_mgr de PMSI voor de geconfigureerde VFI heeft verzonden. Het evenement LSM Head: stuur PMSI moet aanwezig zijn in de geschiedenis van het evenement voor de VFI.
RP/0/0/CPU0:one#show l2vpn bridge-domain p2mp private
[...]
Object: VFI
Base info: version=0x0, flags=0x0, type=0, reserved=0
VFI event trace history [Num events: 5]
----------------------------------------------------------------------------
Time Event Flags Flags
==== ===== ===== =====
Dec 3 08:52:37.504 LSM Head: P2MP Provision 00000001, 00000000 - -
Dec 3 08:52:37.504 BD VPN Add 00000000, 00000000 M -
Dec 3 08:55:56.672 LSM Head: MTE updated 00000001, 00000000 - -
Dec 3 08:55:56.672 LSM Head: send PMSI 00000480, 00002710 - -
----------------------------------------------------------------------------
[...] - L2VPN op de andere routers moet de PMSI ontvangen die zojuist is verzonden. Zorg ervoor dat LSM Tail: PMSI ontvangen wordt getoond in de gebeurtenisgeschiedenis aan de ontvangende kant:
RP/0/0/CPU0:two#show l2vpn bridge-domain p2mp private
[...]
VFI event trace history [Num events: 7]
----------------------------------------------------------------------------
Time Event Flags Flags
==== ===== ===== =====
Dec 3 08:42:49.216 LSM Head: P2MP Provision 00000001, 00000000 - -
Dec 3 08:42:50.240 LSM Head: MTE updated 00000001, 00000070 - -
Dec 3 08:42:50.240 LSM Head: send PMSI 00000480, 00002710 - -
Dec 3 08:43:51.680 BD VPN Add 00000000, 00000000 - -
Dec 3 08:44:59.776 LSM Tail: PMSI received 0100a8c0, 00002710 - -
Dec 3 08:45:00.288 LSM Head: MTE updated 00000001, 00000000 - -
----------------------------------------------------------------------------
[...] - Elke router is zowel een LSM-hoofd als een staart en moet de PMSI versturen en PMSI's ontvangen van elk van de andere routers. De eerste gecontroleerde router moet PMSI's van elk van de andere knooppunten ontvangen.
- Layer 2 Forwarding Information Base (L2FIB) moet de HEAD-informatie van L2VPN ontvangen en deze naar de lijnkaart downloaden.
RP/0/RSP0/CPU0:PE1#show l2vpn forwarding bridge-domain detail location 0/1/CPU0
Bridge-domain name: bg1:bg1_bd1, id: 0, state: up
MAC learning: enabled
MAC port down flush: enabled
Flooding:
Broadcast & Multicast: enabled
Unknown unicast: enabled
MAC aging time: 300 s, Type: inactivity
MAC limit: 4000, Action: none, Notification: syslog
MAC limit reached: no
MAC Secure: disabled, Logging: disabled
DHCPv4 snooping: profile not known on this node
Dynamic ARP Inspection: disabled, Logging: disabled
IP Source Guard: disabled, Logging: disabled
IGMP snooping: disabled, flooding: enabled
MLD snooping: disabled, flooding: disabled
Storm control: disabled
P2MP PW: enabled
Ptree type: RSVP-TE, TE i/f: tunnel-mte100,
nhop valid: TRUE, Status: Bound, Label: 289994
Bridge MTU: 1500 bytes
Number of bridge ports: 4
Number of MAC addresses: 0
Multi-spanning tree instance: 0 - L2FIB moet de TAIL-informatie van L2VPN voor elke PW ontvangen en moet deze naar het platform downloaden.
RP/0/RSP0/CPU0:PE1#show l2vpn forwarding bridge-domain hardware ingress detail
location 0/1/CPU0
Bridge-domain name: bg1:bg1_bd1, id: 0, state: up
MAC learning: enabled
MAC port down flush: enabled
Flooding:
Broadcast & Multicast: enabled
Unknown unicast: enabled
MAC aging time: 300 s, Type: inactivity
MAC limit: 4000, Action: none, Notification: syslog
MAC limit reached: no
MAC Secure: disabled, Logging: disabled
DHCPv4 snooping: profile not known on this node
Dynamic ARP Inspection: disabled, Logging: disabled
IP Source Guard: disabled, Logging: disabled
IGMP snooping: disabled, flooding: enabled
MLD snooping: disabled, flooding: disabled
Storm control: disabled
P2MP PW: enabled
Ptree type: RSVP-TE, TE i/f: tunnel-mte100,
nhop valid: TRUE, Status: Bound, Label: 289994
Bridge MTU: 1500 bytes
Number of bridge ports: 4
Number of MAC addresses: 0
Multi-spanning tree instance: 0
Platform Bridge context:
Last notification sent at: 02/18/2014 21:58:55
Ingress Bridge Domain: 0, State: Created
static MACs: 0, port level static MACs: 0, MAC limit: 4000, current MAC limit:
4000, MTU: 1500, MAC limit action: 0
Rack 0 FGIDs:shg0: 0x00000000, shg1: 0x00000002, shg2: 0x00000002
Rack 1 FGIDs:shg0: 0x00000000, shg1: 0x00000000, shg2: 0x00000000
Flags: Virtual Table ID Disable, P2MP Enable, CorePW Attach
P2MP Head-end Info: Head end bound
Tunnel ifhandle: 0x08000e20, Internal Label: 289994, Local LC NP mask: 0x0,
Head-end Local LC NP mask: 0x0, All L2 Mcast routes local LC NP mask: 0x0
Rack: 0, Physical slot: 1, shg 0 members: 1, shg 1 members: 0, shg 2 members: 0
Platform Bridge HAL context:
Number of NPs: 4, NP mask: 0x0008, mgid index: 513, learn key: 0
NP: 3, shg 0 members: 1, shg 1 members: 0, shg 2 members: 0
MAC limit counter index: 0x00ec1e60
Platform Bridge Domain Hardware Information:
Bridge Domain: 0 NP 0
Flags: Virtual Table, Learn Enable, P2MP Tree Enabled
Head-end P-Tree Int Label: 289994
Num Members: 0, Learn Key: 0x00, Half Age: 5
fgid shg0: 0x0000, fgid shg1: 0x0002, fgid shg2: 0x0002, mgid index: 513
BD learn cntr: 0x00ec1e60
Bridge Domain: 0 NP 1
Flags: Virtual Table, Learn Enable, P2MP Tree Enabled
Head-end P-Tree Int Label: 289994
Num Members: 0, Learn Key: 0x00, Half Age: 5
fgid shg0: 0x0000, fgid shg1: 0x0002, fgid shg2: 0x0002, mgid index: 513
BD learn cntr: 0x00ec1e60
Bridge Domain: 0 NP 2
Flags: Virtual Table, Learn Enable, P2MP Tree Enabled
Head-end P-Tree Int Label: 289994
Num Members: 0, Learn Key: 0x00, Half Age: 5
fgid shg0: 0x0000, fgid shg1: 0x0002, fgid shg2: 0x0002, mgid index: 513
BD learn cntr: 0x00ec1e60
Bridge Domain: 0 NP 3
Flags: Virtual Table, Learn Enable, P2MP Tree Enabled
Head-end P-Tree Int Label: 289994
Num Members: 1, Learn Key: 0x00, Half Age: 5
fgid shg0: 0x0000, fgid shg1: 0x0002, fgid shg2: 0x0002, mgid index: 513
BD learn cntr: 0x00ec1e60
Bridge Member 0, copy 0
Flags: Active, XID: 0x06c002a7
Bridge Member 0, copy 1
Flags: Active, XID: 0x06c002a7
GigabitEthernet0/1/1/10.1, state: oper up
Number of MAC: 0
Statistics:
packets: received 0, sent 0
bytes: received 0, sent 0
Storm control drop counters:
packets: broadcast 0, multicast 0, unknown unicast 0
bytes: broadcast 0, multicast 0, unknown unicast 0
Dynamic arp inspection drop counters:
packets: 0, bytes: 0
IP source guard drop counters:
packets: 0, bytes: 0
Platform Bridge Port context:
Last notification sent at: 02/18/2014 21:58:56
Ingress State: Bound
Flags: None
Platform AC context:
Ingress AC: VPLS, State: Bound
Flags: Port Level MAC Limit
XID: 0x06c002a7, SHG: None
uIDB: 0x001a, NP: 3, Port Learn Key: 0
Slot flood mask rack 0: 0x200000 rack 1: 0x0 NP flood mask: 0x0008
NP3
Ingress uIDB:
Flags: L2, Status, Racetrack Eligible, VPLS
Stats Ptr: 0x5302c9, uIDB index: 0x001a, Wire Exp Tag: 1
BVI Bridge Domain: 0, BVI Source XID: 0x00000000
VLAN1: 0, VLAN1 etype: 0x0000, VLAN2: 0, VLAN2 etype: 0x0000
L2 ACL Format: 0, L2 ACL ID: 0, IPV4 ACL ID: 0, IPV6 ACL ID: 0
QOS ID: 0, QOS Format ID: 0
Local Switch dest XID: 0x06c002a7
UIDB IF Handle: 0x02001042, Source Port: 0, Num VLANs: 0
Xconnect ID: 0x06c002a7, NP: 3
Type: AC
Flags: Learn enable, VPLS
uIDB Index: 0x001a
Bridge Domain ID: 0, Stats Pointer: 0xec1e62
Split Horizon Group: None
Bridge Port : Bridge 0 Port 0
Flags: Active Member
XID: 0x06c002a7
Bridge Port Virt: Bridge 0 Port 0
Flags: Active Member
XID: 0x06c002a7
Storm Control not enabled
Nbor 209.165.200.226 pw-id 1
Number of MAC: 0
Statistics:
packets: received 0, sent 2
bytes: received 0, sent 192
Storm control drop counters:
packets: broadcast 2, multicast 0, unknown unicast 0
bytes: broadcast 192, multicast 0, unknown unicast 0
Dynamic arp inspection drop counters:
packets: 0, bytes: 0
IP source guard drop counters:
packets: 0, bytes: 0
Statistics P2MP:
packets: received 0
bytes: received 0
Platform Bridge Port context:
Last notification sent at: 02/18/2014 21:58:55
Ingress State: Bound
Flags: None
P2MP PW enabled, P2MP Role: tail
Platform PW context:
Ingress PW: VPLS, State: Bound
XID: 0xc0008000, bridge: 0, MAC limit: 4000, l2vpn ldi index: 0x0001, vc label:
16030, nr_ldi_hash: 0xab, r_ldi_hash: 0xbd, lag_hash: 0x17, SHG: VFI Enabled
Flags: MAC Limit Port Level
Port Learn Key: 0
Trident Layer Flags: None
Slot flood mask rack 0: 0x0 rack 1: 0x0 NP flood mask: 0x0000
Primary L3 path: ifhandle: 0x02000100, sfp_or_lagid: 0x00d2
Backup L3 path: Not set
NP0
Xconnect ID: 0xc0008000, NP: 0
Type: Pseudowire (no control word)
Flags: Learn enable, Type 5, Local replication, VPLS
VC label hash, nR-LDI Hash: 0xab, R-LDI Hash: 0xb7, LAG Hash: 0x17,
VC output label: 0x03e9e (16030), LDI: 0x0001, stats ptr: 0x00530258
Bridge Domain ID: 0, Stats Pointer: 0xec1e62
Split Horizon Group: VFI Enabled
NP1
Xconnect ID: 0xc0008000, NP: 1
Type: Pseudowire (no control word)
Flags: Learn enable, Type 5, Local replication, VPLS
VC label hash, nR-LDI Hash: 0xab, R-LDI Hash: 0xb7, LAG Hash: 0x17,
VC output label: 0x03e9e (16030), LDI: 0x0001, stats ptr: 0x00530258
Bridge Domain ID: 0, Stats Pointer: 0xec1e62
Split Horizon Group: VFI Enabled
NP2
Xconnect ID: 0xc0008000, NP: 2
Type: Pseudowire (no control word)
Flags: Learn enable, Type 5, Local replication, VPLS
VC label hash, nR-LDI Hash: 0xab, R-LDI Hash: 0xb7, LAG Hash: 0x17,
VC output label: 0x03e9e (16030), LDI: 0x0001, stats ptr: 0x00530300
Bridge Domain ID: 0, Stats Pointer: 0xec1e62
Split Horizon Group: VFI Enabled
NP3
Xconnect ID: 0xc0008000, NP: 3
Type: Pseudowire (no control word)
Flags: Learn enable, Type 5, Local replication, VPLS
VC label hash, nR-LDI Hash: 0xab, R-LDI Hash: 0xb7, LAG Hash: 0x17,
VC output label: 0x03e9e (16030), LDI: 0x0001, stats ptr: 0x00530488
Bridge Domain ID: 0, Stats Pointer: 0xec1e64
Split Horizon Group: VFI Enabled
Nbor 209.165.200.227 pw-id 1
Number of MAC: 0
Statistics:
packets: received 0, sent 1
bytes: received 0, sent 96
Storm control drop counters:
packets: broadcast 0, multicast 0, unknown unicast 0
bytes: broadcast 0, multicast 0, unknown unicast 0
Dynamic arp inspection drop counters:
packets: 0, bytes: 0
IP source guard drop counters:
packets: 0, bytes: 0
Statistics P2MP:
packets: received 0
bytes: received 0
Platform Bridge Port context:
Last notification sent at: 02/18/2014 21:58:55
Ingress State: Bound
Flags: None
P2MP PW enabled, P2MP Role: tail
Platform PW context:
Ingress PW: VPLS, State: Bound
XID: 0xc0008001, bridge: 0, MAC limit: 4000, l2vpn ldi index: 0x0002, vc label:
16030, nr_ldi_hash: 0xab, r_ldi_hash: 0xbd, lag_hash: 0x17, SHG: VFI Enabled
Flags: MAC Limit Port Level
Port Learn Key: 0
Trident Layer Flags: None
Slot flood mask rack 0: 0x0 rack 1: 0x0 NP flood mask: 0x0000
Primary L3 path: ifhandle: 0x02000100, sfp_or_lagid: 0x00d2
Backup L3 path: Not set
NP0
Xconnect ID: 0xc0008001, NP: 0
Type: Pseudowire (no control word)
Flags: Learn enable, Type 5, Local replication, VPLS
VC label hash, nR-LDI Hash: 0xab, R-LDI Hash: 0xb7, LAG Hash: 0x17,
VC output label: 0x03e9e (16030), LDI: 0x0002, stats ptr: 0x0053025e
Bridge Domain ID: 0, Stats Pointer: 0xec1e64
Split Horizon Group: VFI Enabled
NP1
Xconnect ID: 0xc0008001, NP: 1
Type: Pseudowire (no control word)
Flags: Learn enable, Type 5, Local replication, VPLS
VC label hash, nR-LDI Hash: 0xab, R-LDI Hash: 0xb7, LAG Hash: 0x17,
VC output label: 0x03e9e (16030), LDI: 0x0002, stats ptr: 0x0053025e
Bridge Domain ID: 0, Stats Pointer: 0xec1e64
Split Horizon Group: VFI Enabled
NP2
Xconnect ID: 0xc0008001, NP: 2
Type: Pseudowire (no control word)
Flags: Learn enable, Type 5, Local replication, VPLS
VC label hash, nR-LDI Hash: 0xab, R-LDI Hash: 0xb7, LAG Hash: 0x17,
VC output label: 0x03e9e (16030), LDI: 0x0002, stats ptr: 0x00530306
Bridge Domain ID: 0, Stats Pointer: 0xec1e64
Split Horizon Group: VFI Enabled
NP3
Xconnect ID: 0xc0008001, NP: 3
Type: Pseudowire (no control word)
Flags: Learn enable, Type 5, Local replication, VPLS
VC label hash, nR-LDI Hash: 0xab, R-LDI Hash: 0xb7, LAG Hash: 0x17,
VC output label: 0x03e9e (16030), LDI: 0x0002, stats ptr: 0x0053048e
Bridge Domain ID: 0, Stats Pointer: 0xec1e66
Split Horizon Group: VFI Enabled
Nbor 209.165.200.228 pw-id 1
Number of MAC: 0
Statistics:
packets: received 0, sent 0
bytes: received 0, sent 0
Storm control drop counters:
packets: broadcast 0, multicast 0, unknown unicast 0
bytes: broadcast 0, multicast 0, unknown unicast 0
Dynamic arp inspection drop counters:
packets: 0, bytes: 0
IP source guard drop counters:
packets: 0, bytes: 0
Statistics P2MP:
packets: received 0
bytes: received 0
Platform Bridge Port context:
Last notification sent at: 02/18/2014 21:58:55
Ingress State: Bound
Flags: None
P2MP PW enabled, P2MP Role: tail
Platform PW context:
Ingress PW: VPLS, State: Bound
XID: 0xc0008002, bridge: 0, MAC limit: 4000, l2vpn ldi index: 0x0003, vc label:
16045, nr_ldi_hash: 0x7b, r_ldi_hash: 0xb3, lag_hash: 0xa8, SHG: VFI Enabled
Flags: MAC Limit Port Level
Port Learn Key: 0
Trident Layer Flags: None
Slot flood mask rack 0: 0x0 rack 1: 0x0 NP flood mask: 0x0000
Primary L3 path: ifhandle: 0x02000100, sfp_or_lagid: 0x00d2
Backup L3 path: Not set
NP0
Xconnect ID: 0xc0008002, NP: 0
Type: Pseudowire (no control word)
Flags: Learn enable, Type 5, Local replication, VPLS
VC label hash, nR-LDI Hash: 0x7b, R-LDI Hash: 0xd6, LAG Hash: 0xa8,
VC output label: 0x03ead (16045), LDI: 0x0003, stats ptr: 0x00530264
Bridge Domain ID: 0, Stats Pointer: 0xec1e66
Split Horizon Group: VFI Enabled
NP1
Xconnect ID: 0xc0008002, NP: 1
Type: Pseudowire (no control word)
Flags: Learn enable, Type 5, Local replication, VPLS
VC label hash, nR-LDI Hash: 0x7b, R-LDI Hash: 0xd6, LAG Hash: 0xa8,
VC output label: 0x03ead (16045), LDI: 0x0003, stats ptr: 0x00530264
Bridge Domain ID: 0, Stats Pointer: 0xec1e66
Split Horizon Group: VFI Enabled
NP2
Xconnect ID: 0xc0008002, NP: 2
Type: Pseudowire (no control word)
Flags: Learn enable, Type 5, Local replication, VPLS
VC label hash, nR-LDI Hash: 0x7b, R-LDI Hash: 0xd6, LAG Hash: 0xa8,
VC output label: 0x03ead (16045), LDI: 0x0003, stats ptr: 0x0053030c
Bridge Domain ID: 0, Stats Pointer: 0xec1e66
Split Horizon Group: VFI Enabled
NP3
Xconnect ID: 0xc0008002, NP: 3
Type: Pseudowire (no control word)
Flags: Learn enable, Type 5, Local replication, VPLS
VC label hash, nR-LDI Hash: 0x7b, R-LDI Hash: 0xd6, LAG Hash: 0xa8,
VC output label: 0x03ead (16045), LDI: 0x0003, stats ptr: 0x00530494
Bridge Domain ID: 0, Stats Pointer: 0xec1e68
Split Horizon Group: VFI Enabled
RP/0/RSP0/CPU0:PE1#
Revisiegeschiedenis
| Revisie | Publicatiedatum | Opmerkingen |
|---|---|---|
1.0 |
01-Apr-2014 |
Eerste vrijgave |
FeedbackContact Cisco
- Een ondersteuningscase openen
- (Vereist een Cisco-servicecontract)