Kubernetes 및 CEE OPS-Center용 명령을 사용하여 POD 문제 해결
소개
이 문서에서는 Kubernetes 및 CEE OPS-Center용 명령을 사용하여 POD의 문제를 해결하는 방법에 대해 설명합니다.
Kubernetes 및 CEE OPS-Center용 명령을 사용하여 POD 문제 해결
1. k8s CLI
1.1 모든 네임스페이스 나열
명령을 사용합니다:
kubectl get namespace
예:
cisco@brusmi-master1:~$ kubectl get namespace
NAME STATUS AGE
cee-cee Active 6d
default Active 6d
kube-node-lease Active 6d
kube-public Active 6d
kube-system Active 6d
lfs Active 6d
nginx-ingress Active 6d
smf-data Active 6d
smi-certs Active 6d
smi-vips Active 6d
1.2 특정 네임스페이스에 대한 모든 서비스를 나열합니다.
명령을 사용합니다:
kubectl get svc -n <namespace>
예:
cisco@brusmi-master1:~$ kubectl get svc -n smf-data
NAME TYPE CLUSTER-IP EXTERNAL-IP PORT(S) AGE
base-entitlement-smf ClusterIP 10.97.93.253 <none> 8000/TCP 6d
datastore-ep-session ClusterIP 10.101.15.88 <none> 8882/TCP 6h51m
datastore-notification-ep ClusterIP 10.110.182.26 <none> 8890/TCP 6h51m
datastore-tls-ep-session ClusterIP 10.110.115.33 <none> 8883/TCP 6h51m
documentation ClusterIP 10.110.85.239 <none> 8080/TCP 6d
etcd ClusterIP None <none> 2379/TCP,7070/TCP 6h51m
etcd-smf-data-etcd-cluster-0 ClusterIP 10.103.194.229 <none> 2380/TCP,2379/TCP 6h51m
grafana-dashboard-app-infra ClusterIP 10.98.161.155 <none> 9418/TCP 6h51m
grafana-dashboard-cdl ClusterIP 10.104.32.111 <none> 9418/TCP 6h51m
grafana-dashboard-smf ClusterIP 10.106.64.191 <none> 9418/TCP 6h51m
gtpc-ep ClusterIP 10.99.49.25 x.x.x.201 9003/TCP,8080/TCP 6h51m
helm-api-smf-data-ops-center ClusterIP 10.109.206.198 <none> 3000/TCP 6d
kafka ClusterIP None <none> 9092/TCP,7070/TCP 6h51m
li-ep ClusterIP 10.106.134.35 <none> 9003/TCP,8080/TCP 6h51m
local-ldap-proxy-smf-data-ops-center ClusterIP 10.99.160.226 <none> 636/TCP,369/TCP 6d
oam-pod ClusterIP 10.105.223.47 <none> 9008/TCP,7001/TCP,8879/TCP,10080/TCP 6h51m
ops-center-smf-data-ops-center ClusterIP 10.103.164.204 <none> 8008/TCP,8080/TCP,2024/TCP,2022/TCP,7681/TCP 6d
smart-agent-smf-data-ops-center ClusterIP 10.97.143.81 <none> 8888/TCP 6d
smf-n10-service ClusterIP 10.102.197.22 10.10.10.205 8090/TCP 6h51m
smf-n11-service ClusterIP 10.108.109.186 10.10.10.203 8090/TCP 6h51m
smf-n40-service ClusterIP 10.111.170.158 10.10.10.206 8090/TCP 6h51m
smf-n7-service ClusterIP 10.102.140.179 10.10.10.204 8090/TCP 6h51m
smf-nodemgr ClusterIP 10.102.68.172 <none> 9003/TCP,8884/TCP,9201/TCP,8080/TCP 6h51m
smf-protocol ClusterIP 10.111.219.156 <none> 9003/TCP,8080/TCP 6h51m
smf-rest-ep ClusterIP 10.109.189.99 <none> 9003/TCP,8080/TCP,9201/TCP 6h51m
smf-sbi-service ClusterIP 10.105.176.248 10.10.10.201 8090/TCP 6h51m
smf-service ClusterIP 10.100.143.237 <none> 9003/TCP,8080/TCP 6h51m
swift-smf-data-ops-center ClusterIP 10.98.196.46 <none> 9855/TCP,50055/TCP,56790/TCP 6d
zookeeper ClusterIP None <none> 2888/TCP,3888/TCP 6h51m
zookeeper-service ClusterIP 10.109.109.102 <none> 2181/TCP,7070/TCP 6h51m
1.3 특정 네임스페이스에 대한 모든 포드 나열:
명령을 사용합니다:
kubectl get pods -n <namespace>
예:
cisco@brusmi-master1:~$ kubectl get pods -n smf-data
NAME READY STATUS RESTARTS AGE
api-smf-data-ops-center-57c8f6b4d7-wt66s 1/1 Running 0 6d
base-entitlement-smf-fcdb664d-fkgss 1/1 Running 0 6d
cache-pod-0 1/1 Running 0 6h53m
cache-pod-1 1/1 Running 0 6h53m
cdl-ep-session-c1-dbb5f7874-4gmfr 1/1 Running 0 6h53m
cdl-ep-session-c1-dbb5f7874-5zbqw 1/1 Running 0 6h53m
cdl-index-session-c1-m1-0 1/1 Running 0 6h53m
cdl-slot-session-c1-m1-0 1/1 Running 0 6h53m
documentation-5dc8d5d898-mv6kx 1/1 Running 0 6d
etcd-smf-data-etcd-cluster-0 1/1 Running 0 6h53m
grafana-dashboard-app-infra-5b8dd74bb6-xvlln 1/1 Running 0 6h53m
grafana-dashboard-cdl-5df868c45c-vbr4r 1/1 Running 0 6h53m
grafana-dashboard-smf-657755b7c8-fvbdt 1/1 Running 0 6h53m
gtpc-ep-n0-0 1/1 Running 0 6h53m
kafka-0 1/1 Running 0 6h53m
li-ep-n0-0 1/1 Running 0 6h53m
oam-pod-0 1/1 Running 0 6h53m
ops-center-smf-data-ops-center-7fbb97d9c9-tx7qd 5/5 Running 0 6d
smart-agent-smf-data-ops-center-6667dcdd65-2h7nr 0/1 Evicted 0 6d
smart-agent-smf-data-ops-center-6667dcdd65-6wfvq 1/1 Running 0 4d18h
smf-nodemgr-n0-0 1/1 Running 0 6h53m
smf-protocol-n0-0 1/1 Running 0 6h53m
smf-rest-ep-n0-0 1/1 Running 0 6h53m
smf-service-n0-0 1/1 Running 5 6h53m
smf-udp-proxy-0 1/1 Running 0 6h53m
swift-smf-data-ops-center-68bc75bbc7-4zdc7 1/1 Running 0 6d
zookeeper-0 1/1 Running 0 6h53m
zookeeper-1 1/1 Running 0 6h52m
zookeeper-2 1/1 Running 0 6h52m
1.4 특정 포드 이름(레이블, 이미지, 포트, 볼륨, 이벤트 등)에 대한 전체 세부사항을 나열합니다.
명령을 사용합니다:
kubectl describe pods <pod_name> -n <namespace>
예:
cisco@brusmi-master1:~$ kubectl describe pods smf-service-n0-0 -n smf-data
smf-service-n0-0 <<< POD name
smf-data <<< Namespace
2. k8s 로그 및 전체 코어
2.1 특정 포드의 컨테이너 이름 가져오기:
명령을 사용합니다:
kubectl describe pods <pod_name> -n <namespace> | grep Containers -A1
예:
cisco@brusmi-master1:~$ kubectl describe pods smf-service-n0-0 -n smf-data | grep Containers -A1
컨테이너:
smf-service:
--
ContainersReady True
PodScheduled True
2.2 Kubernetes에서 포드 충돌이 관찰될 때 로그를 확인합니다.
명령을 사용합니다:
kubectl get pods -n <namespace> | grep -v Running
예:
cisco@brusmi-master1:~$ kubectl get pods -n smf-data | grep -v Running
NAME READY STATUS RESTARTS AGE
smart-agent-smf-data-ops-center-6667dcdd65-2h7nr 0/1 Evicted 0 5d23h
smf-service-n0-0 0/1 CrashLoopBackOff 2 6h12m
명령을 사용합니다:
kubectl logs <pod_name> -c <container_name> -n <namespace>
예:
cisco@brusmi-master1:~$ kubectl logs smf-service-n0-0 -c smf-service -n smf-data
/opt/workspace
-rwxrwxrwx 1 root root 84180872 Mar 31 06:18 /opt/workspace/smf-service
Launching: /opt/workspace/tini /opt/workspace/smf-service
2020-06-09 20:26:16.341043 I | proto: duplicate proto type registered: internalmsg.SessionKey
2020-06-09 20:26:16.341098 I | proto: duplicate proto type registered: internalmsg.NInternalTxnMsg
2020-06-09 20:26:16.343170 I | smf-service [INFO] [main.go:18] [smfservice] ##########################MARCH DROP################
#########
2020-06-09 20:26:16.343197 I | smf-service [INFO] [main.go:19] [smfservice] ###########################SMF######################
#########
2020-06-09 20:26:16.343210 I | smf-service [INFO] [main.go:20] [smfservice] SMF-SERVICE
2020-06-09 20:26:16.343221 I | smf-service [INFO] [main.go:21] [smfservice] ###########################SMF######################
#########
2020-06-09 20:26:16.343232 I | smf-service [INFO] [main.go:22] [smfservice] ###########################MARCH DROP###############
#########
2020/06/09 20:26:16.343 smf-service [DEBUG] [Tracer.go:181] [unknown] Loaded initial tracing configuration TracerType: , TracerJ
aegerTransportType: , TracerEndpoint: , ServiceName: smf-service, TracerServiceName: , EnableTracePercent: 0, AppendMessages: fa
.
.
2020/06/09 20:44:28.157 smf-service [DEBUG] [RestRouter.go:24] [infra.rest_server.core] Rest message received
2020/06/09 20:44:28.158 smf-service [DEBUG] [RestRouter.go:43] [infra.rest_server.core] Set Ping as name for the RestMessage and Sla SlaInfo[enabled:false,timeout:0] from the Endpoint
2020/06/09 20:44:28.159 smf-service [INFO] [ApplicationEndpoint.go:333] [infra.application.core] Ping server response!
2020/06/09 20:44:30.468 smf-service [DEBUG] [MetricsServer_v1.go:305] [infra.application.core] Checkpointing gauge with name smf_session_counters
2020/06/09 20:44:31.158 smf-service [DEBUG] [RestRouter.go:24] [infra.rest_server.core] Rest message received
2020/06/09 20:44:31.158 smf-service [DEBUG] [RestRouter.go:43] [infra.rest_server.core] Set Ping as name for the RestMessage and Sla SlaInfo[enabled:false,timeout:0] from the Endpoint
2020/06/09 20:44:31.158 smf-service [INFO] [ApplicationEndpoint.go:333] [infra.application.core] Ping server response!
smf-service-n0-0 <<< POD name
smf-service <<< Container Name
smf-data <<< Namespace
2.3 코어덤프가 생성되었는지 확인합니다.
명령을 사용합니다:
ls -lrt /var/lib/systemd/coredump/
예:
cisco@brusmi-master1:~$ ls -lrt /var/lib/systemd/coredump/
total 0
참고: 코어 파일은 /var/lib/systemd/coredump/ 각 VM의 경로. 코어는 TAC 대시보드에서도 제공됩니다.
3. CEE에서 TAC-Debug 생성
3.1 Master k8s에서 cee Ops-Center에 로그인:
cisco@brusmi-master1:~$ kubectl get namespace
NAME STATUS AGE
cee-cee Active 5d3h
default Active 5d3h
kube-node-lease Active 5d3h
kube-public Active 5d3h
kube-system Active 5d3h
lfs Active 5d3h
nginx-ingress Active 5d3h
smf-data Active 5d3h
smi-certs Active 5d3h
smi-vips Active 5d3h
cisco@brusmi-master1:~$ ssh -p 2024 admin@$(kubectl get svc -n cee-cee | grep ^ops-center | awk '{print $3}')
admin@10.102.44.219's password:
Welcome to the cee CLI on brusmi/cee
admin connected from 192.x.0.1 using ssh on ops-center-cee-cee-ops-center-79cf55b49b-6wrh9
[brusmi/cee] cee#
참고: 앞서 언급한 예에서 CEE 네임스페이스는 "cee-cee"입니다. 필요한 경우 이 이름을 바꿔야 합니다.
3.2 검색된 수집 파일을 참조하기 위해 TAC 패키지 ID를 생성합니다.
명령을 사용합니다:
tac-debug-pkg create from <Start_time> to <End_time>
예:
[brusmi/cee] cee# tac-debug-pkg create from 2020-06-08_14:00:00 to 2020-06-08_15:00:00
response : Tue Jun 9 00:22:17 UTC 2020 tac-debug pkg ID : 1592948929
또한 다음과 같이 namespace 또는 pod_name과 같은 추가 필터를 포함할 수 있습니다.
명령을 사용합니다:
tac-debug-pkg create from <Start_time> to <End_time> logs-filter { namespace <namespace> pod_name <pod_name> }
예:
[brusmi/cee] cee# tac-debug-pkg create from 2020-06-08_14:00:00 to 2020-06-08_15:00:00 logs-filter { namespace smf-data pod_name cache-pod-0 }
response : Tue Jun 9 00:28:49 UTC 2020 tac-debug pkg ID : 1591662529
참고: 슬롯 기간(1시간 또는 최대 2시간) 동안 tac 패키지 ID를 생성하는 것이 좋습니다.
3.3 각 서비스의 상태를 표시합니다.
[brusmi/cee] cee# tac-debug-pkg status
response : Tue Jun 9 00:28:51 UTC 2020
Tac id: 1591662529
Gather core: completed!
Gather logs: in progress
Gather metrics: in progress
Gather stats: completed!
Gather config: completed!
[brusmi/cee] cee#
[brusmi/cee] cee# tac-debug-pkg status
response : Tue Jun 9 00:43:45 UTC 2020
No active tac debug session <<< If none active tac debug session is displayed, it means that all information was already gathered.
참고: 사용 가능한 디스크 공간이 없으면 오래된 디버그 파일을 제거하십시오.
[brusmi/cee] cee# tac-debug-pkg create from 2020-06-08_09:00:00 to 2020-06-08_10:00:00 logs-filter { namespace smf-data }
response : Tue Jun 9 00:45:48 UTC 2020
Available disk space on node is less than 20 %. Please remove old debug files and retry.
[brusmi/cee] cee# tac-debug-pkg delete tac-id 1591662529
3.4 메트릭만 수집하기 위한 TAC 디버그 ID 생성:
[nyucs504-cnat/global] cee# tac-debug-pkg create from 2021-02-24_12:30:00 to 2021-02-24_14:30:00 cores false logs false cfg false stats false
response : Wed Feb 24 19:39:49 UTC 2021 tac-debug pkg ID : 1614195589
4. TAC 디버그 다운로드
현재 CEE에서 TAC 디버그를 다운로드하는 옵션은 세 가지가 있습니다.
4.1 마스터 VIP의 SFTP(권장되지 않지만 오래 걸림).
4.1.1 수집된 로그를 다운로드할 URL 가져오기 tac package ID :
명령을 사용합니다:
kubectl get ingress -n <namespace> | grep show-tac
예:
cisco@brusmi-master1:~$ kubectl get ingress -n cee-cee | grep show-tac
show-tac-manager-ingress show-tac-manager.cee-cee-smi-show-tac.192.168.208.10.xxx.x 80, 443 5d4h
4.1.2 tac-debug 파일을 압축 및 가져옵니다. show-tac-manager 포드:
a. show-tac pod의 ID를 가져옵니다.
명령을 사용합니다:
kubectl get pods -n <namespace> | grep show-tac
예:
cisco@brusmi-master1:~$ kubectl get pods -n cee-cee | grep show-tac
show-tac-manager-85985946f6-bflrc 2/2 Running 0 12d
b. exec 명령을 실행합니다. show-tac pod및 TAC 디버그 로그를 압축합니다.
명령을 사용합니다:
kubectl exec -it -n <namespace> <pod_name> bash
예:
cisco@brusmi-master1:~$ kubectl exec -it -n cee-cee show-tac-manager-85985946f6-bflrc bash
Defaulting container name to show-tac-manager.
Use 'kubectl describe pod/show-tac-manager-85985946f6-bflrc -n cee-cee' to see all of the containers in this pod.
groups: cannot find name for group ID 101
groups: cannot find name for group ID 190
groups: cannot find name for group ID 303
I have no name!@show-tac-manager-85985946f6-bflrc:/show-tac-manager/bin$ cd /home/tac/
I have no name!@show-tac-manager-85985946f6-bflrc:/home/tac$ tar -zcvf tac-debug_1591662529.tar.gz 1591662529
1591662529/
1591662529/config/
1591662529/config/192.x.1.14_configuration.tar.gz.base64
1591662529/stats/
1591662529/stats/Stats_2020-06-08_14-00-00_2020-06-08_15-00-00.tar.gz
1591662529/manifest.json
1591662529/metrics/
1591662529/metrics/Metrics_2020-06-08_14-00-00_2020-06-08_15-00-00.tar.gz
1591662529/web/
1591662529/web/index.html
1591662529/logs/
1591662529/logs/brusmi-master1/
1591662529/logs/brusmi-master1/brusmi-master1_Logs_2020-06-08_14-00-00_2020-06-08_15-00-00.tar.gz
I have no name!@show-tac-manager-85985946f6-bflrc:/home/tac$ ls
1591662490 1591662529 1592265088 tac-debug_1591662529.tar.gz
4.1.3 파일을 /tmp 마스터 VIP의 디렉터리:
명령을 사용합니다:
kubectl cp <namespace>/<show-tac_pod_name>:/home/tac/<file_name.tar.gz> /tmp/<file_name.tar.gz>
예:
cisco@brusmi-master1:~$ kubectl cp cee-cee/show-tac-manager-85985946f6-bflrc:/home/tac/tac-debug_1591662529.tar.gz /tmp/tac-debug_1591662529.tar.gz
Defaulting container name to show-tac-manager.
tar: Removing leading `/' from member names
cisco@brusmi-master1:~$ cd /tmp
cisco@brusmi-master1:/tmp$ ls
cee.cfg
tac-debug_1591662529.tar.gz
tiller_service_acct.yaml
4.1.4 마스터 VIP에서 sftp를 통해 파일을 전송합니다.
4.2 TAC 디버그 다운로드 wget 명령(macOS/Ubuntu).
4.2.1 "k8s get ingress" 출력에서 show-tac 링크 가져오기:
cisco@brusmi-master1:~$ kubectl get ingress -n cee-cee | grep show-tac
show-tac-manager-ingress show-tac-manager.cee-cee-smi-show-tac.192.168.208.10.xxx.x 80, 443 5d4h
4.2.2 wget PC 터미널에서 명령:
wget -r -np https://show-tac-manager.cee-cee-smi-show-tac.192.168.208.10.xxx.x/tac/
<tac-id>/ --no-check-certificate --http-user=<NTID_username>
--http-password=<NTID_password>
5. CEE에서 모든 SMF POD의 로그를 수집합니다.
5.1 로그인 smf-data마스터 k8의 운영 센터:
cisco@brusmi-master1:~$ ssh -p 2024 admin@$(kubectl get svc -n smf-data | grep ^ops-center | awk '{print $3}')
admin@10.103.164.204's password:
Welcome to the smf CLI on brusmi/data
admin connected from 192.x.0.1 using ssh on ops-center-smf-data-ops-center-7fbb97d9c9-tx7qd
5.2 "logging level application"이 활성화되었는지 확인합니다.
[brusmi/data] smf# show running-config | i logging
logging level application debug
logging level transaction debug
logging level tracing debug
logging name infra.config.core level application debug
logging name infra.config.core level transaction debug
logging name infra.config.core level tracing debug
logging name infra.message_log.core level application debug
logging name infra.message_log.core level transaction debug
logging name infra.resource_monitor.core level application off
logging name infra.rest_server.core level application debug
5.3 Master k8s에서 cee Ops-Center에 로그인:
cisco@brusmi-master1:~$ ssh -p 2024 admin@$(kubectl get svc -n cee-cee | grep ^ops-center | awk '{print $3}')
admin@10.102.44.219's password:
Welcome to the cee CLI on brusmi/cee
admin connected from 192.x.0.1 using ssh on ops-center-cee-cee-ops-center-79cf55b49b-6wrh9
[brusmi/cee] cee#
참고: 앞서 언급한 예에서 CEE 네임스페이스는 "cee-cee"입니다. 필요한 경우 이 이름을 바꿔야 합니다.
5.4 "로 시작하는 모든 SMF POD의 로그를 테일링합니다.smf-"(smf-nodemgr, smf-protocol, smf-rest , smf-service, smf-udp-proxy). 몇 초 동안 로그를 수집하고 Ctrl+C를 사용하여 데이터 수집을 중지합니다.
[brusmi/cee] cee# cluster logs ^smf- -n smf-data
error: current-context must exist in order to minify
Will tail 5 logs...
smf-nodemgr-n0-0
smf-protocol-n0-0
smf-rest-ep-n0-0
smf-service-n0-0
smf-udp-proxy-0
[smf-service-n0-0] 2020/06/08 17:04:57.331 smf-service [DEBUG] [RestRouter.go:24] [infra.rest_server.core] Rest message received
[smf-service-n0-0] 2020/06/08 17:04:57.331 smf-service [DEBUG] [RestRouter.go:43] [infra.rest_server.core] Set Ping as name for the RestMessage and Sla SlaInfo[enabled:false,timeout:0] from the Endpoint
[smf-service-n0-0] 2020/06/08 17:04:57.331 smf-service [INFO] [ApplicationEndpoint.go:333] [infra.application.core] Ping server response!
[smf-service-n0-0] 2020/06/08 17:05:00.331 smf-service [DEBUG] [RestRouter.go:24] [infra.rest_server.core] Rest message received
[smf-service-n0-0] 2020/06/08 17:05:00.332 smf-service [DEBUG] [RestRouter.go:43] [infra.rest_server.core] Set Ping as name for the RestMessage and Sla SlaInfo[enabled:false,timeout:0] from the Endpoint
[smf-service-n0-0] 2020/06/08 17:05:00.332 smf-service [INFO] [ApplicationEndpoint.go:333] [infra.application.core] Ping server response!
[smf-service-n0-0] 2020/06/08 17:05:01.658 smf-service [DEBUG] [MetricsServer_v1.go:305] [infra.application.core] Checkpointing gauge with name smf_session_counters
[smf-service-n0-0] 2020/06/08 17:05:03.330 smf-service [DEBUG] [RestRouter.go:24] [infra.rest_server.core] Rest message received
[smf-service-n0-0] 2020/06/08 17:05:03.330 smf-service [DEBUG] [RestRouter.go:43] [infra.rest_server.core] Set Ping as name for the RestMessage and Sla SlaInfo[enabled:false,timeout:0] from the Endpoint
[smf-service-n0-0] 2020/06/08 17:05:03.330 smf-service [INFO] [ApplicationEndpoint.go:333] [infra.application.core] Ping server response!
[smf-service-n0-0] 2020/06/08 17:05:06.330 smf-service [DEBUG] [RestRouter.go:24] [infra.rest_server.core] Rest message received
[smf-service-n0-0] 2020/06/08 17:05:06.330 smf-service [DEBUG] [RestRouter.go:43] [infra.rest_server.core] Set Ping as name for the RestMessage and Sla SlaInfo[enabled:false,timeout:0] from the Endpoint
[smf-service-n0-0] 2020/06/08 17:05:06.330 smf-service [INFO] [ApplicationEndpoint.go:333] [infra.application.core] Ping server response!
[smf-protocol-n0-0] 2020/06/08 17:04:58.441 smf-protocol [DEBUG] [RestRouter.go:24] [infra.rest_server.core] Rest message received
[smf-service-n0-0] 2020/06/08 17:05:06.661 smf-service [DEBUG] [MetricsServer_v1.go:305] [infra.application.core] Checkpointing gauge with name smf_session_counters
[smf-protocol-n0-0] 2020/06/08 17:04:58.441 smf-protocol [DEBUG] [RestRouter.go:43] [infra.rest_server.core] Set Ping as name for the RestMessage and Sla SlaInfo[enabled:false,timeout:0] from the Endpoint
[smf-protocol-n0-0] 2020/06/08 17:04:58.441 smf-protocol [INFO] [ApplicationEndpoint.go:333] [infra.application.core] Ping server response!
[smf-nodemgr-n0-0] 2020/06/08 17:04:57.329 smf-nodemgr [DEBUG] [CacheClient.go:118] [infra.cache_client.core] Received UpdateRecord request with the param cacheId:"IPAM" filter:<pKeyVal:"IPAM/CacheContext/datastore/Local:smf-data:0" > action:<nonUniqueKeyVals:"IPAM/CacheContext/datastore" nonUniqueKeyVals:"IPAM" timeVal:1591635897
참고: 특정 포드, 컨테이너 또는 여러 포드에서 로그를 수집해야 하는 경우 좀 더 구체적으로 지정할 수 있습니다.
### Specific pod ###
[brusmi/cee] cee# cluster logs smf-nodemgr-n0-0 -n smf-data
[brusmi/cee] cee# cluster logs smf-rest-ep-n0-0 -n smf-data
### Specific container ###
[brusmi/cee] cee# cluster logs smf-nodemgr -n smf-data
[brusmi/cee] cee# cluster logs smf-service -n smf-data
[brusmi/cee] cee# cluster logs zookeeper -n smf-data
[brusmi/cee] cee# cluster logs smf-rest-ep -n smf-data
### Multiple pods ###
[brusmi/cee] cee# cluster logs "(smf-service.|smf-rest.|smf-nodemgr.|smf-protocol.|gtpc-ep.|smf-udp-proxy.)" -n smf-data -e
6. Grafana에 액세스
6.1 Grafana에 액세스하기 위한 URL 가져오기:
cisco@brusmi-master1:~$ kubectl get ingress -n cee-cee | grep grafana
grafana-ingress grafana.192.168.168.208.10.xxx.x 80, 443 6d18h
6.2 다음과 같이 HTTPS를 사용하여 웹 페이지를 엽니다.
https://grafana.192.168.208.10.xxx.x
개정 이력
| 개정 | 게시 날짜 | 의견 |
|---|---|---|
1.0 |
31-Mar-2023 |
최초 릴리스 |
피드백