ASA에서 클라이언트 인증서 인증을 사용하여 Linux용 AnyConnect Secure Mobility Client 구성
소개
이 문서에서는 ASA(Adaptive Security Appliance) Cisco AnyConnect Secure Mobility Client 액세스를 위한 컨피그레이션 예를 설명합니다.
배경
이 문서에서 설명하는 컨피그레이션 예는 AnyConnect 사용자가 ASA 헤드엔드에 성공적으로 연결하기 위해 Linux OS(Operate System)용 인증에 클라이언트 인증서를 사용하는 ASA(Adaptive Security Appliance) Cisco AnyConnect Secure Mobility Client 액세스에 대한 것입니다.
사전 요구 사항
요구 사항
이 문서에서는 ASA가 완전히 작동하며 Cisco ASDM(Adaptive Security Device Manager) 또는 CLI(Command Line Interface)에서 컨피그레이션을 변경할 수 있도록 구성되어 있다고 가정합니다.
다음 주제에 대한 지식을 보유하고 있으면 유용합니다.
ASA CLI 및 ASDM에 대한 기본 지식
Cisco ASA 헤드엔드의 SSL VPN 컨피그레이션
PKI에 대한 기본 지식
Linux OS에 익숙함
사용되는 구성 요소
이 문서의 정보는 다음 소프트웨어 및 하드웨어 버전을 기반으로 합니다.
Cisco Adaptive Security Appliance ASA5585-SSP-20
Cisco Adaptive Security Appliance Software 버전 9.9(2)36
Adaptive Security Device Manager 버전 7.9(1)
AnyConnect 버전 4.6.03049
Ubuntu OS 16.04.1 LTS
이 문서의 정보는 특정 랩 환경의 디바이스를 토대로 작성되었습니다. 이 문서에 사용된 모든 디바이스는 초기화된(기본) 컨피그레이션으로 시작되었습니다. 현재 네트워크가 작동 중인 경우 모든 명령의 잠재적인 영향을 미리 숙지하시기 바랍니다.
배경 정보
Linux 디바이스에서 성공적인 클라이언트 인증서 인증을 위해 AnyConnect Secure Mobility 클라이언트는 다음 인증서 저장소를 지원합니다.
1. PEM(Linux OS) 인증서 저장소
2. NSS(Firefox) 인증서 저장소
이 문서는 PEM(Linux OS) 인증서 저장소를 사용하는 클라이언트 인증서 인증을 기반으로 합니다.
1. Linux OS 인증서 저장소를 사용하려면 PEM 파일 기반 인증서가 이러한 디렉토리에 배치됩니다.
| 엔티티 | 경로 | 예 |
| CA(인증 기관) 인증서 | /opt/.cisco/certificates/ca | tactest:~$ ls /opt/.cisco/certificates/ca CACERT.pem VeriSignClass3PublicPrimaryCertificationAuthority-G5.pem |
| 사용자 인증서 | /home/tactest/.cisco/certificates/client | tactest:~$ ls /home/tactest/.cisco/certificates/client myclient.pem |
| 사용자 개인 키[CSR 생성에 처음 사용됨]: | /home/tactest/.cisco/certificates/client/private | tactest:~$ ls /home/tactest/.cisco/certificates/client/private myclient.key |
Windows 인증 기관을 사용하는 경우:
1. 확장명이 .cer인 CA 인증서(Base64 인코딩)를 다운로드합니다.
2. 확장명이 .cer인 사용자 ID 인증서(Base64 인코딩)를 다운로드합니다
3. 인증서 확장명을 .cer에서 .pem 확장명으로 변경합니다
2. Firefox(NSS) 인증서 저장소를 사용하려면 Firefox에서 인증서를 가져올 수 있습니다.
사용자가 를 클릭하면 AnyConnect 클라이언트에서 ASA용 CA 인증서를 NSS 인증서 저장소로 자동으로 가져올 수 있습니다 Always Connect HTTPS를 사용하여 ASA로 탐색을 수행할 때 certificate security message(인증서 보안 메시지) 대화 상자의 버튼을 클릭합니다.
AnyConnect Linux는 NSS(Firefox Certificate Store)를 기본값으로 사용합니다. 실패하면 Linux OS 인증서 저장소가 사용됩니다.
파일이 다음 요구 사항을 충족하는지 확인합니다.
- 모든 인증서 파일은 .pem 확장자로 끝나야 합니다.
- 모든 개인 키 파일은 .key 확장명으로 끝나야 합니다.
- 클라이언트 인증서 및 연결된 개인 키의 파일 이름이 같아야 합니다. 예: client.pem 및 client.key.
깔끔하게 시작하려면 다음 방법을 사용하십시오.
- Linux OS(PEM) 인증서 저장소:
A. 아래의 불필요한 PEM 파일을 제거합니다./opt/.cisco/certificates하지만/opt/.cisco/certificates/ca/VeriSignClass3PublicPrimaryCertificationAuthority-G5.pem인증서는 그대로 유지됩니다. 이것은 AnyConnect가 코드 서명 확인을 수행하기 위해 사용하는 CA 인증서입니다.
B. 경로에서 필요하지 않은 사용자 인증서를 제거합니다~/.cisco/certificates. - Firefox(NSS) 인증서 저장소:
Firefox 설정을 사용하여 사용자 또는 AnyConnect에서 가져온 관련 인증서를 검사하고 삭제합니다.
구성
네트워크 다이어그램
설정
Linux 클라이언트 설정
1. AnyConnect 패키지를 다운로드하고 내용을 추출한 다음 Linux 클라이언트에 AnyConnect 애플리케이션을 설치합니다.
tactest:Documents$ pwd /home/tactest/Documents tactest:Documents$ ls anyconnect-linux64-4.6.03049-predeploy-k9.tar.gz tactest:Documents$ tar -xvf anyconnect-linux64-4.6.03049-predeploy-k9.tar.gz tactest:Documents$ ls anyconnect-linux64-4.6.03049 anyconnect-linux64-4.6.03049-predeploy-k9.tar.gz tactest:Documents$ cd anyconnect-linux64-4.6.03049/vpn/ tactest:vpn$ sudo su [sudo] password for tactest: root:vpn# pwd /home/tactest/Documents/anyconnect-linux64-4.6.03049/vpn root:vpn# ./vpn_install.sh Installing Cisco AnyConnect Secure Mobility Client...
2. OpenSSL을 사용하여 Linux 클라이언트의 ID 인증서에 대한 인증서 서명 요청을 생성합니다.
[dime@localhost ~]$ openssl genrsa -des3 -out server.key 2048 Generating RSA private key, 2048 bit long modulus ..................................+++ ............................................+++ e is 65537 (0x10001) Enter pass phrase for server.key: Verifying - Enter pass phrase for server.key: [dime@localhost ~]$ [dime@localhost ~]$ openssl rsa -in server.key -out server.key.insecure Enter pass phrase for server.key: writing RSA key [dime@localhost ~]$ mv server.key server.key.secure [dime@localhost ~]$ [dime@localhost ~]$ mv server.key.insecure server.key [dime@localhost ~]$ [dime@localhost ~]$ ! The insecure key is now named server.key, and you can use this file to generate the CSR without passphrase. [dime@localhost ~]$ [dime@localhost ~]$ openssl req -new -key server.key -out server.csr You are about to be asked to enter information that will be incorporated into your certificate request. What you are about to enter is what is called a Distinguished Name or a DN. There are quite a few fields but you can leave some blank For some fields there will be a default value, If you enter '.', the field will be left blank. ----- Country Name (2 letter code) [XX]:US State or Province Name (full name) []:CA Locality Name (eg, city) [Default City]:SJ Organization Name (eg, company) [Default Company Ltd]:Cisco Organizational Unit Name (eg, section) []:HTTS Common Name (eg, your name or your server's hostname) []:dimenet Email Address []: Please enter the following 'extra' attributes to be sent with your certificate request A challenge password []: An optional company name []: [dime@localhost ~]$ [dime@localhost ~]$ ls | grep -i server server.csr server.key server.key.secure [dime@localhost ~]$ [dime@localhost ~]$ cat server.csr -----BEGIN CERTIFICATE REQUEST----- MIICvTCCAaUCAQAwYTELMAkGA1UEBhMCVVMxCzAJBgNVBAgMAkNBMQswCQYDVQQH DAJTSjEOMAwGA1UECgwFQ2lzY28xDTALBgNVBAsMBEhUVFMxGTAXBgNVBAMMEGRp bWViCG5lCAgICAgICAgwggEiMA0GCSqGSIb3DQEBAQUAA4IBDwAwggEKAoIBAQC/ 0e5PF09y45/+vlfZbuWRaw1vUiJPxy8OdXZhKT7VmDSitdTnPs2Q7cfzVaM1GdIw c/HoHTL+rmmCn2Ccc9NGoWok3damhhu19xAt2VXz8jS6mV5bqTeBLYEWJ2Tgh7wA 4/0aPGILZCkQNNn3PruTLe8dqfEhFU6nGp7iJKNjlvyd34Di5YL1NhEQGdZ9q7aK 5VE3nBhgELmPOle53Pt/ZYWwji138QN8Qo9bXOZmQmRXgRucFaeN0VJVF+0EnnAJ Y58+yiImEvqKe8h1OCxT2H/TH+5+XRHmggee/zZvis7JMWWcKACOUjQ9scTrjp+z TW4CM2Cmox3AEcOJ9yg/AgMBAAGgFzAVBgkqhkiG9w0BCQcxCAwGY2lzY28IMA0G CSqGSIb3DQEBCwUAA4IBAQC7uRbj+0JxUw7REXc41Ma30WIxhhzvn6QGax8+EPlL c7wpsMtCSwV7BOgFLKqI7h+dcME+CfBYlcPre2/5LMYo336i9i0tsodV/+EU3NBg L/RSoH099wBIEo7Xxx30xi38PvnCPnbZZEL2IWrgTyO4ohEOUjEOYnD16kUJvISy Ky8z/3gGDRuhks2Yv4CTTRcvQAvljsLCOZiyaVVrp2xmsPtHxrd6vLrupoxdNpJy xG1P/67JMLS3qqpTuvAqXT5uT2OBAC2hBgMGuKZCOC3mR4WlmoED9woFPESUUMQf mKOksgQfrrxOZKPyhV8J4jByAjLSw6vh41dJHY9qKaGo -----END CERTIFICATE REQUEST----- [dime@localhost ~]$
3. 이전에 생성한 CSR을 사용하여 CA에 사용자 ID 인증서 발급을 요청할 수 있습니다.
4. CA에서 인증서를 발급하면 Linux 클라이언트에 인증서를 복사합니다.
a. .pem 파일 만들기
/home/tactest/.cisco/certificates/client 명령을 사용하여
touch myclient.pem
b. CA에서 발급한 클라이언트 ID 인증서에서 Base64 인코딩 인증서 내용을 복사합니다.
c. 를 사용하여 파일을 편집합니다.
vi
d. "i"를 눌러 파일에 텍스트를 삽입합니다.
myclientcert.pem 또는
나노 myclientcert.pemd. "i"를 눌러 파일에 텍스트를 삽입합니다.
e. Base64 인코딩 인증서를 붙여넣습니다.
f. 누르기
f. 누르기
Escape 다음을 입력합니다.
:wq! 파일 편집 기능을 저장하고 중지합니다.
5. 마찬가지로 CA 인증서를 경로에 배치합니다
/opt/.cisco/certificates/ca
ASA CLI 컨피그레이션
이 섹션에서는 참조를 위해 Cisco AnyConnect Secure Mobility Client에 대한 CLI 컨피그레이션을 제공합니다.
다음을 확인합니다.
interface GigabitEthernet0/1 nameif outside security-level 0 ip address 10.106.63.179 255.255.255.0 ! interface GigabitEthernet0/2 nameif inside security-level 100 ip address 192.168.30.1 255.255.255.0 asdm image disk0:/asdm-791.bin route outside 0.0.0.0 0.0.0.0 10.106.63.1 1 !--------------------Client pool configuration----------------- ip local pool ANYCONNECT-POOL 192.168.100.1-192.168.100.254 mask 255.255.255.0 !--------------------Split ACL configuration-------------------- access-list SPLIT-TUNNEL standard permit 10.0.0.0 255.255.255.0 !------Configure Trustpoint containing ASA Identity Certificate ------ crypto ca trustpoint IDENTITY enrollment terminal subject-name CN=bglanyconnect.cisco.com keypair ID_CERT crl configure !-------Apply trustpoint on outside interface------ ssl trust-point IDENTITY outside !-------Enable AnyConnect and setup AnyConnect Image------ webvpn enable outside anyconnect image disk0:/anyconnect-linux64-4.6.03049-webdeploy-k9.pkg 1 anyconnect enable tunnel-group-list enable !--------------------Group Policy configuration-------------------- group-policy GroupPolicy_ANYCONNECT-PROFILE internal group-policy GroupPolicy_ANYCONNECT-PROFILE attributes dns-server value 10.10.10.99 vpn-tunnel-protocol ssl-client ssl-clientless split-tunnel-policy tunnelspecified split-tunnel-network-list value SPLIT-TUNNEL default-domain value cisco.com !----------Tunnel-Group (Connection Profile) Configuraiton---------- tunnel-group ANYCONNECT_PROFILE type remote-access tunnel-group ANYCONNECT_PROFILE general-attributes address-pool ANYCONNECT-POOL default-group-policy GroupPolicy_ANYCONNECT-PROFILE tunnel-group ANYCONNECT_PROFILE webvpn-attributes authentication certificate group-alias ANYCONNECT-PROFILE enable : end
다음을 확인합니다.
구성이 올바르게 작동하는지 확인하려면 이 섹션을 활용하십시오.
- Ubuntu OS 16.04.1 LTS에서 GUI를 통해 AnyConnect를 연결합니다.
- Linux 클라이언트의 명령줄을 사용하여 AnyConnect를 연결하려면 다음 경로로 이동합니다.
tactest:vpn$ cd /opt/cisco/anyconnect/bin tactest:vpn$ tactest:bin$ ./vpn Cisco AnyConnect Secure Mobility Client (version 4.6.03049) . Copyright (c) 2004 - 2018 Cisco Systems, Inc. All Rights Reserved. >> state: Disconnected >> state: Disconnected >> notice: Ready to connect. >> registered with local VPN subsystem. VPN>
- AnyConnect 클라이언트가 연결을 설정할 수 있는지 확인합니다.
VPN> connect bglanyconnect.cisco.com connect bglanyconnect.cisco.com >> contacting host (bglanyconnect.cisco.com) for login information... >> notice: Contacting bglanyconnect.cisco.com. >> Your client certificate will be used for authentication Group: ANYCONNECT-PROFILE >> state: Connecting >> notice: Establishing VPN session... The AnyConnect Downloader is analyzing this computer. Please wait... The AnyConnect Downloader is performing update checks... >> notice: The AnyConnect Downloader is performing update checks... >> notice: Checking for profile updates... The AnyConnect Downloader updates have been completed. Please wait while the VPN connection is established... >> state: Connecting >> notice: Checking for product updates... >> notice: Checking for customization updates... >> notice: Performing any required updates... >> notice: The AnyConnect Downloader updates have been completed. >> notice: Establishing VPN session... >> notice: Establishing VPN - Initiating connection... >> notice: Establishing VPN - Examining system... >> notice: Establishing VPN - Activating VPN adapter... >> notice: Establishing VPN - Configuring system... >> notice: Establishing VPN... >> state: Connected >> notice: Connected to bglanyconnect.cisco.com. >> state: Connected >> notice: Connected to bglanyconnect.cisco.com. VPN> disconnect disconnect >> state: Disconnecting >> notice: Disconnect in progress, please wait... >> state: Disconnecting >> notice: Disconnect in progress, please wait... >> state: Disconnecting >> state: Disconnected >> notice: Ready to connect. >> state: Disconnected >> notice: Ready to connect. VPN>
VPN> connect bglanyconnect.cisco.com connect bglanyconnect.cisco.com >> contacting host (bglanyconnect.cisco.com) for login information... >> state: Disconnected >> error: Connect not available. Another AnyConnect application is running or this functionality was not requested by this application. VPN>
참고: 이 경우 AnyConnect GUI 클라이언트를 닫은 다음 AnyConnect CLI를 사용하여 연결합니다.
- 성공적으로 연결되면 AnyConnect 클라이언트 세부사항은
Statistics탭을 클릭합니다.
- 이 명령은 ASA(Adaptive Security Appliance)에 있는 CA 및 ID 인증서를 확인하는 데 사용됩니다.
bglanyconnect# show crypto ca certificate Certificate Status: Available Certificate Serial Number: 640000004944fa39c42d24c199000000000049 Certificate Usage: General Purpose Public Key Type: RSA (1024 bits) Signature Algorithm: SHA256 with RSA Encryption Issuer Name: cn=SHERLOCK-CA dc=calo dc=lab Subject Name: cn=bglanyconnect.cisco.com CRL Distribution Points: [1] ldap:///CN=SHERLOCK-CA,CN=sherlock,CN=CDP,CN=Public%20Key%20Services,CN=Services,CN=Configuration,DC=calo,DC=lab?certificateRevocationList?base?objectClass=cRLDistributionPoint Validity Date: start date: 03:00:53 UTC Jun 28 2019 end date: 03:00:53 UTC Jun 27 2021 Storage: config Associated Trustpoints: IDENTITY CA Certificate Status: Available Certificate Serial Number: 4a39345869f0e2aa4e8d60143b6d90f7 Certificate Usage: Signature Public Key Type: RSA (2048 bits) Signature Algorithm: SHA256 with RSA Encryption Issuer Name: cn=SHERLOCK-CA dc=calo dc=lab Subject Name: cn=SHERLOCK-CA dc=calo dc=lab Validity Date: start date: 10:23:28 UTC Sep 22 2017 end date: 10:33:28 UTC Sep 22 2037 Storage: config Associated Trustpoints: IDENTITY - 이러한 show 명령을 실행하여 AnyConnect 클라이언트의 상태와 해당 통계를 확인할 수 있습니다.
bglanyconnect# show vpn-session anyconnect Session Type: AnyConnect Username : dimenet Index : 46 Assigned IP : 192.168.100.1 Public IP : 10.106.44.166 Protocol : AnyConnect-Parent SSL-Tunnel DTLS-Tunnel License : AnyConnect Premium Encryption : AnyConnect-Parent: (1)none SSL-Tunnel: (1)AES-GCM-256 DTLS-Tunnel: (1)AES256 Hashing : AnyConnect-Parent: (1)none SSL-Tunnel: (1)SHA384 DTLS-Tunnel: (1)SHA1 Bytes Tx : 12756 Bytes Rx : 1843 Group Policy : GroupPolicy_ANYCONNECT-PROFILE Tunnel Group : ANYCONNECT_PROFILE Login Time : 20:49:30 UTC Sat Jun 29 2019 Duration : 0h:15m:19s Inactivity : 0h:00m:00s VLAN Mapping : N/A VLAN : none Audt Sess ID : 1e1e1e010002e0005d17ceda Security Grp : none bglanyconnect# bglanyconnect# show vpn-session detail anyconnect filter name dimenet Session Type: AnyConnect Detailed Username : dimenet Index : 46 Assigned IP : 192.168.100.1 Public IP : 10.106.44.166 Protocol : AnyConnect-Parent SSL-Tunnel DTLS-Tunnel License : AnyConnect Premium Encryption : AnyConnect-Parent: (1)none SSL-Tunnel: (1)AES-GCM-256 DTLS-Tunnel: (1)AES256 Hashing : AnyConnect-Parent: (1)none SSL-Tunnel: (1)SHA384 DTLS-Tunnel: (1)SHA1 Bytes Tx : 12756 Bytes Rx : 1843 Pkts Tx : 10 Pkts Rx : 29 Pkts Tx Drop : 0 Pkts Rx Drop : 0 Group Policy : GroupPolicy_ANYCONNECT-PROFILE Tunnel Group : ANYCONNECT_PROFILE Login Time : 20:49:30 UTC Sat Jun 29 2019 Duration : 0h:15m:25s Inactivity : 0h:00m:00s VLAN Mapping : N/A VLAN : none Audt Sess ID : 1e1e1e010002e0005d17ceda Security Grp : none AnyConnect-Parent Tunnels: 1 SSL-Tunnel Tunnels: 1 DTLS-Tunnel Tunnels: 1 AnyConnect-Parent: Tunnel ID : 46.1 Public IP : 10.106.44.166 Encryption : none Hashing : none TCP Src Port : 58918 TCP Dst Port : 443 Auth Mode : Certificate Idle Time Out: 30 Minutes Idle TO Left : 14 Minutes Client OS : linux-64 Client OS Ver: Linux 4.4.0-31-generic #50-Ubuntu SMP Wed Jul 13 00:07:12 UTC 2016 x86_64 Client Type : AnyConnect Client Ver : Cisco AnyConnect VPN Agent for Linux 4.6.03049 Bytes Tx : 6378 Bytes Rx : 0 Pkts Tx : 5 Pkts Rx : 0 Pkts Tx Drop : 0 Pkts Rx Drop : 0 SSL-Tunnel: Tunnel ID : 46.2 Assigned IP : 192.168.100.1 Public IP : 10.106.44.166 Encryption : AES-GCM-256 Hashing : SHA384 Ciphersuite : ECDHE-RSA-AES256-GCM-SHA384 Encapsulation: TLSv1.2 TCP Src Port : 58924 TCP Dst Port : 443 Auth Mode : Certificate Idle Time Out: 30 Minutes Idle TO Left : 14 Minutes Client OS : Linux_64 Client Type : SSL VPN Client Client Ver : Cisco AnyConnect VPN Agent for Linux 4.6.03049 Bytes Tx : 6378 Bytes Rx : 59 Pkts Tx : 5 Pkts Rx : 1 Pkts Tx Drop : 0 Pkts Rx Drop : 0 DTLS-Tunnel: Tunnel ID : 46.3 Assigned IP : 192.168.100.1 Public IP : 10.106.44.166 Encryption : AES256 Hashing : SHA1 Ciphersuite : DHE-RSA-AES256-SHA Encapsulation: DTLSv1.0 UDP Src Port : 43180 UDP Dst Port : 443 Auth Mode : Certificate Idle Time Out: 30 Minutes Idle TO Left : 27 Minutes Client OS : Linux_64 Client Type : DTLS VPN Client Client Ver : Cisco AnyConnect VPN Agent for Linux 4.6.03049 Bytes Tx : 0 Bytes Rx : 1784 Pkts Tx : 0 Pkts Rx : 28 Pkts Tx Drop : 0 Pkts Rx Drop : 0
- Linux 클라이언트에 올바른 형식의 인증서(확장명이 .pem인 Base64 인코딩)가 있는지 확인하려면 지정된 경로로 이동하여 다음 명령을 사용합니다.
tactest:client$ cd /home/tactest/.cisco/certificates/client tactest-client$ tactest:client$ ls myclient.pem tactest-client$ tactest:client$ openssl x509 -in myclient.pem -text -noout Certificate: Data: Version: 3 (0x2) Serial Number: 64:00:00:00:47:14:e8:bc:85:e5:1d:bf:c4:00:00:00:00:00:47 Signature Algorithm: sha256WithRSAEncryption Issuer: DC=lab, DC=calo, CN=SHERLOCK-CA Validity Not Before: Jun 27 15:02:04 2019 GMT Not After : Jun 26 15:02:04 2021 GMT Subject: C=US, ST=CA, L=SJ, O=Cisco, OU=HTTS, CN=dimenet Subject Public Key Info: Public Key Algorithm: rsaEncryption Public-Key: (2048 bit) Modulus: 00:c3:42:18:d8:fc:09:72:92:81:2f:5d:aa:d4:c6: bf:4c:10:b0:f6:ad:21:ae:f9:9c:50:0b:f0:aa:b7: 02:a0:11:52:e0:23:68:e0:71:f7:67:b9:9f:bd:0b: 9d:88:70:66:d2:26:3d:ac:a9:1a:ad:1f:47:0c:9f: 5e:51:09:68:4a:31:f1:ed:86:48:bb:82:24:06:ad: d4:e4:0a:9e:56:f2:7d:f9:bc:11:97:d1:b6:52:3e: 4b:a6:fe:99:ff:6b:c3:ab:32:d9:24:ae:15:70:82: d5:1e:62:ef:68:f0:e3:b7:84:29:58:b0:d2:8f:40: 60:96:cf:ca:fd:04:72:a4:0a:37:ab:88:2e:59:3b: eb:86:41:6f:da:be:a6:64:b1:6c:be:e5:00:42:af: a8:82:1f:2c:14:78:26:4f:c4:61:19:94:96:df:cc: 05:21:e5:12:36:ff:4d:f5:ac:f5:f6:45:1f:4c:16: 47:73:9b:84:ad:48:66:04:a9:15:49:ba:cc:d6:58: f9:30:71:c5:46:f9:05:e1:b5:09:3b:ee:3c:ce:f5: fa:89:54:d3:7f:14:8a:b3:32:1c:3f:19:07:6c:1a: cb:95:23:16:8b:ca:44:c7:d6:0a:3c:35:a3:ec:5d: f9:2b:58:41:11:32:00:53:43:31:70:36:cc:86:04: 6d:4b Exponent: 65537 (0x10001) X509v3 extensions: X509v3 Subject Key Identifier: 45:64:99:B1:5F:A1:7C:5F:4F:77:0D:12:CE:B8:F8:CA:40:4D:FA:A8 X509v3 Authority Key Identifier: keyid:1B:51:FF:8A:71:E7:9C:2B:66:29:28:FD:44:16:BF:44:A4:A1:7D:E1 X509v3 CRL Distribution Points: Full Name: URI:ldap:///CN=SHERLOCK-CA,CN=sherlock,CN=CDP,CN=Public%20Key%20Services,CN=Services,CN=Configuration,DC=calo,DC=lab?certificateRevocationList?base?objectClass=cRLDistributionPoint Authority Information Access: CA Issuers - URI:ldap:///CN=SHERLOCK-CA,CN=AIA,CN=Public%20Key%20Services,CN=Services,CN=Configuration,DC=calo,DC=lab?cACertificate?base?objectClass=certificationAuthority X509v3 Key Usage: critical Digital Signature, Key Encipherment 1.3.6.1.4.1.311.21.7: 0..&+.....7.....E...........U..r.T...V......d... X509v3 Extended Key Usage: TLS Web Client Authentication 1.3.6.1.4.1.311.21.10: 0.0 ..+....... Signature Algorithm: sha256WithRSAEncryption 0b:4d:46:fe:dd:0b:78:1a:35:ea:2b:d6:d6:33:ef:5a:86:5a: 07:63:db:ef:ae:b3:87:e3:4d:c7:e8:d2:39:fe:5a:f2:8b:40: 1e:f0:92:3f:48:ed:4d:67:e3:a6:44:05:6f:db:d8:96:bb:a6: a4:c7:98:fa:40:a5:aa:2d:1f:4b:49:32:1a:86:71:3d:72:69: f3:3f:e6:9f:f7:94:56:2e:10:0c:4c:c1:74:f1:ee:0e:28:00: bb:84:84:99:4d:07:ba:1b:68:1d:b5:98:f6:b7:96:55:c1:b8: 5e:14:53:88:82:07:4e:3c:d8:7e:b0:f4:8d:1c:05:fd:8b:20: 12:a4:94:05:7c:ad:81:63:50:05:8d:44:40:31:7c:e0:a8:33: 1e:a3:19:c2:cb:bf:c8:03:b3:05:08:52:23:7e:11:ad:45:04: bd:0e:5a:8b:26:60:8f:3e:1c:98:41:f9:4d:3e:1a:1f:c8:d5: 97:e3:0a:40:cb:0b:23:ba:9a:f7:27:d6:a1:c5:fd:91:dc:6d: 04:ab:b7:d5:1d:54:d7:b3:ab:99:45:df:c1:01:b8:16:6e:40: c9:76:9e:36:36:b8:fc:e3:a1:03:86:61:2b:ac:ec:6d:c9:f4: 91:ff:81:58:30:24:d3:81:8b:f0:20:23:49:7a:84:0f:91:80: 2b:54:96:4d
여기에 표시된 오류를 수신한 경우 DER 인코딩 인증서를 보려고 했지만 PEM 인코딩 인증서가 아니었음을 의미합니다
unable to load certificate 12626:error:0906D06C:PEM routines:PEM_read_bio:no start line:pem_lib.c:647:Expecting: TRUSTED CERTIFICATE
문제 해결
이 섹션에서는 컨피그레이션 문제를 해결하는 데 사용할 수 있는 정보를 제공합니다.
Linux OS 클라이언트에서 인바운드 AnyConnect 클라이언트 연결의 문제를 해결하려면 다음을 사용합니다.
- ASA의 AnyConnect 프로세스
debug webvpn anyconnect 255
다음은 작업 시나리오에서 ASA에서 가져온 샘플 디버그입니다.
%ASA-7-609001: Built local-host outside:10.106.44.166
%ASA-6-302013: Built inbound TCP connection 13540 for outside:10.106.44.166/58944 (10.106.44.166/58944) to identity:10.106.63.179/443 (10.106.63.179/443)
%ASA-6-725001: Starting SSL handshake with client outside:10.106.44.166/58944 to 10.106.63.179/443 for TLS session
%ASA-7-725010: Device supports the following 20 cipher(s)
%ASA-7-725011: Cipher[1] : ECDHE-ECDSA-AES256-GCM-SHA384
%ASA-7-725011: Cipher[2] : ECDHE-RSA-AES256-GCM-SHA384
%ASA-7-725011: Cipher[3] : DHE-RSA-AES256-GCM-SHA384
%ASA-7-725011: Cipher[4] : AES256-GCM-SHA384
%ASA-7-725011: Cipher[5] : ECDHE-ECDSA-AES256-SHA384
%ASA-7-725011: Cipher[6] : ECDHE-RSA-AES256-SHA384
%ASA-7-725011: Cipher[7] : DHE-RSA-AES256-SHA256
%ASA-7-725011: Cipher[8] : AES256-SHA256
%ASA-7-725011: Cipher[9] : ECDHE-ECDSA-AES128-GCM-SHA256
%ASA-7-725011: Cipher[10] : ECDHE-RSA-AES128-GCM-SHA256
%ASA-7-725011: Cipher[11] : DHE-RSA-AES128-GCM-SHA256
%ASA-7-725011: Cipher[12] : AES128-GCM-SHA256
%ASA-7-725011: Cipher[13] : ECDHE-ECDSA-AES128-SHA256
%ASA-7-725011: Cipher[14] : ECDHE-RSA-AES128-SHA256
%ASA-7-725011: Cipher[15] : DHE-RSA-AES128-SHA256
%ASA-7-725011: Cipher[16] : AES128-SHA256
%ASA-7-725011: Cipher[17] : DHE-RSA-AES256-SHA
%ASA-7-725011: Cipher[18] : AES256-SHA
%ASA-7-725011: Cipher[19] : DHE-RSA-AES128-SHA
%ASA-7-725011: Cipher[20] : AES128-SHA
%ASA-7-725008: SSL client outside:10.106.44.166/58944 to 10.106.63.179/443 proposes the following 21 cipher(s)
%ASA-7-725011: Cipher[1] : ECDHE-ECDSA-AES256-GCM-SHA384
%ASA-7-725011: Cipher[2] : ECDHE-RSA-AES256-GCM-SHA384
%ASA-7-725011: Cipher[3] : DHE-RSA-AES256-GCM-SHA384
%ASA-7-725011: Cipher[4] : AES256-GCM-SHA384
%ASA-7-725011: Cipher[5] : ECDHE-ECDSA-AES256-SHA384
%ASA-7-725011: Cipher[6] : ECDHE-RSA-AES256-SHA384
%ASA-7-725011: Cipher[7] : DHE-RSA-AES256-SHA256
%ASA-7-725011: Cipher[8] : AES256-SHA256
%ASA-7-725011: Cipher[9] : ECDHE-ECDSA-AES128-GCM-SHA256
%ASA-7-725011: Cipher[10] : ECDHE-RSA-AES128-GCM-SHA256
%ASA-7-725011: Cipher[11] : DHE-RSA-AES128-GCM-SHA256
%ASA-7-725011: Cipher[12] : AES128-GCM-SHA256
%ASA-7-725011: Cipher[13] : ECDHE-ECDSA-AES128-SHA256
%ASA-7-725011: Cipher[14] : ECDHE-RSA-AES128-SHA256
%ASA-7-725011: Cipher[15] : DHE-RSA-AES128-SHA256
%ASA-7-725011: Cipher[16] : AES128-SHA256
%ASA-7-725011: Cipher[17] : DHE-RSA-AES256-SHA
%ASA-7-725011: Cipher[18] : AES256-SHA
%ASA-7-725011: Cipher[19] : DHE-RSA-AES128-SHA
%ASA-7-725011: Cipher[20] : AES128-SHA
%ASA-7-725011: Cipher[21] : DES-CBC3-SHA
%ASA-7-725012: Device chooses cipher ECDHE-RSA-AES256-GCM-SHA384 for the SSL session with client outside:10.106.44.166/58944 to 10.106.63.179/443
%ASA-6-725016: Device selects trust-point IDENTITY for client outside:10.106.44.166/58944 to 10.106.63.179/443
%ASA-6-725002: Device completed SSL handshake with client outside:10.106.44.166/58944 to 10.106.63.179/443 for TLSv1.2 session
%ASA-6-725007: SSL session with client outside:10.106.44.166/58944 to 10.106.63.179/443 terminated
%ASA-6-302014: Teardown TCP connection 13540 for outside:10.106.44.166/58944 to identity:10.106.63.179/443 duration 0:00:00 bytes 2948 TCP Reset-I from identity
%ASA-7-609002: Teardown local-host outside:10.106.44.166 duration 0:00:00
%ASA-7-609001: Built local-host outside:10.106.44.166
%ASA-6-302013: Built inbound TCP connection 13541 for outside:10.106.44.166/58946 (10.106.44.166/58946) to identity:10.106.63.179/443 (10.106.63.179/443)
%ASA-6-725001: Starting SSL handshake with client outside:10.106.44.166/58946 to 10.106.63.179/443 for TLS session
%ASA-7-725010: Device supports the following 20 cipher(s)
%ASA-7-725011: Cipher[1] : ECDHE-ECDSA-AES256-GCM-SHA384
%ASA-7-725011: Cipher[2] : ECDHE-RSA-AES256-GCM-SHA384
%ASA-7-725011: Cipher[3] : DHE-RSA-AES256-GCM-SHA384
%ASA-7-725011: Cipher[4] : AES256-GCM-SHA384
%ASA-7-725011: Cipher[5] : ECDHE-ECDSA-AES256-SHA384
%ASA-7-725011: Cipher[6] : ECDHE-RSA-AES256-SHA384
%ASA-7-725011: Cipher[7] : DHE-RSA-AES256-SHA256
%ASA-7-725011: Cipher[8] : AES256-SHA256
http_parse_cstp_method()
...input: 'CONNECT /CSCOSSLC/tunnel HTTP/1.1'
webvpn_cstp_parse_request_field()
...input: 'Host: bglanyconnect.cisco.com'
Processing CSTP header line: 'Host: bglanyconnect.cisco.com'
webvpn_cstp_parse_request_field()
...input: 'User-Agent: Cisco AnyConnect VPN Agent for Linux 4.6.03049'
Processing CSTP header line: 'User-Agent: Cisco AnyConnect VPN Agent for Linux 4.6.03049'
Setting user-agent to: 'Cisco AnyConnect VPN Agent for Linux 4.6.03049'
webvpn_cstp_parse_request_field()
...input: 'Cookie: webvpn=05B9EB@192512@A755@0A99DF461C27977CA12A0EAB41F5D7CD46AD8162'
Processing CSTP header line: 'Cookie: webvpn=05B9EB@192512@A755@0A99DF461C27977CA12A0EAB41F5D7CD46AD8162'
Found WebVPN cookie: 'webvpn=05B9EB@192512@A755@0A99DF461C27977CA12A0EAB41F5D7CD46AD8162'
WebVPN Cookie: 'webvpn=05B9EB@192512@A755@0A99DF461C27977CA12A0EAB41F5D7CD46AD8162'
webvpn_cstp_parse_request_field()
...input: 'X-CSTP-Version: 1'
Processing CSTP header line: 'X-CSTP-Version: 1'
webvpn_cstp_parse_request_field()
...input: 'X-CSTP-Hostname: tactest-virtual-machine'
Processing CSTP header line: 'X-CSTP-Hostname: tactest-virtual-machine'
Setting hostname to: 'tactest-virtual-machine'
webvpn_cstp_parse_request_field()
...input: 'X-CSTP-MTU: 1399'
Processing CSTP header line: 'X-CSTP-MTU: 1399'
webvpn_cstp_parse_request_field()
...input: 'X-CSTP-Address-Type: IPv6,IPv4'
Processing CSTP header line: 'X-CSTP-Address-Type: IPv6,IPv4'
webvpn_cstp_parse_request_field()
...input: 'X-CSTP-Local-Address-IP4: 10.106.44.166'
Processing CSTP header line: 'X-CSTP-Local-Address-IP4: 10.106.44.166'
webvpn_cstp_parse_request_field()
...input: 'X-CSTP-Base-MTU: 1500'
Processing CSTP header line: 'X-CSTP-Base-MTU: 1500'
webvpn_cstp_parse_request_field()
...input: 'X-CSTP-Remote-Address-IP4: 10.106.63.179'
Processing CSTP header line: 'X-CSTP-Remote-Address-IP4: 10.106.63.179'
webvpn_cstp_parse_request_field()
...input: 'X-CSTP-Full-IPv6-Capability: true'
Processing CSTP header line: 'X-CSTP-Full-IPv6-Capability: true'
webvpn_cstp_parse_request_field()
...input: 'X-DTLS-Master-Secret: F731F1B9371EC4E34DF4FF3FE230D5150B621C30F45D44D9579918C0CFF03BC7EEA7AEA1A59D247F6B70FC8B24237639'
Processing CSTP header line: 'X-DTLS-Master-Secret: F731F1B9371EC4E34DF4FF3FE230D5150B621C30F45D44D9579918C0CFF03BC7EEA7AEA1A59D247F6B70FC8B24237639'
webvpn_cstp_parse_request_field()
...input: 'X-DTLS-CipherSuite: DHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES256-SHA256:DHE-RSA-AES256-SHA:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES128-SHA256:DHE-RSA-AES128-SHA:AES256-SHA:AES128-SHA:DES-CBC3-SHA'
Processing CSTP header line: 'X-DTLS-CipherSuite: DHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES256-SHA256:DHE-RSA-AES256-SHA:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES128-SHA256:DHE-RSA-AES128-SHA:AES256-SHA:AES128-SHA:DES-CBC3-SHA'
webvpn_cstp_parse_request_field()
...input: 'X-DTLS-Accept-Encoding: lzs'
Processing CSTL header line: 'X-DTLS-Accept-Encoding: lzs'
webvpn_cstp_parse_request_field()
...input: 'X-DTLS-Header-Pad-Length: 0'
webvpn_cstp_parse_request_field()
...input: 'X-CSTP-Accept-Encoding: lzs'
Processing CSTP header line: 'X-CSTP-Accept-Encoding: lzs'
webvpn_cstp_parse_request_field()
...input: 'X-CSTP-Protocol: Copyright (c) 2004 Cisco Systems, Inc.'
Processing CSTP header line: 'X-CSTP-Protocol: Copyright (c) 2004 Cisco Systems, Inc.'
cstp_util_address_ipv4_accept: address asigned: 192.168.100.1
cstp_util_address_ipv6_accept: No IPv6 Address
np_svc_create_session(0x2F000, 0x00007f884ad8fb00, TRUE)
webvpn_svc_np_setup
SVC ACL Name: NULL
SVC ACL ID: -1
vpn_put_uauth success for ip 192.168.100.1!
No SVC ACL
Iphdr=20 base-mtu=1500 def-mtu=1500 conf-mtu=1406
tcp-mss = 1460
path-mtu = 1460(mss)
TLS Block size = 16, version = 0x303
mtu = 1460(path-mtu) - 12(opts) - 5(ssl) - 16(iv) = 1427
mod-mtu = 1427(mtu) & 0xfff0(complement) = 1424
tls-mtu = 1424(mod-mtu) - 8(cstp) - 48(mac) - 1(pad) = 1367
DTLS Block size = 16
mtu = 1500(base-mtu) - 20(ip) - 8(udp) - 13(dtlshdr) - 16(dtlsiv) = 1443
mod-mtu = 1443(mtu) & 0xfff0(complement) = 1440
dtls-mtu = 1440(mod-mtu) - 1(cdtp) - 20(mac) - 1(pad) = 1418
computed tls-mtu=1367 dtls-mtu=1418 conf-mtu=1406
DTLS enabled for intf=3 (outside)
overide computed dtls-mtu=1418 with conf-mtu=1406
tls-mtu=1367 dtls-mtu=1406
SVC: adding to sessmgmt
Sending X-CSTP-DNS: 10.10.10.99
Sending X-CSTP-Split-Include msgs: for ACL - SPLIT-TUNNEL: Start
Sending X-CSTP-Split-Include: 10.0.0.0/255.255.255.0
Sending X-CSTP-MTU: 1367
Sending X-DTLS-MTU: 1406
Sending X-CSTP-FW-RULE msgs: Start
Sending X-CSTP-FW-RULE msgs: Done
Sending X-CSTP-Quarantine: false
Sending X-CSTP-Disable-Always-On-VPN: false
Sending X-CSTP-Client-Bypass-Protocol: false
%ASA-7-725011: Cipher[9] : ECDHE-ECDSA-AES128-GCM-SHA256
%ASA-7-725011: Cipher[10] : ECDHE-RSA-AES128-GCM-SHA256
%ASA-7-725011: Cipher[11] : DHE-RSA-AES128-GCM-SHA256
%ASA-7-725011: Cipher[12] : AES128-GCM-SHA256
%ASA-7-725011: Cipher[13] : ECDHE-ECDSA-AES128-SHA256
%ASA-7-725011: Cipher[14] : ECDHE-RSA-AES128-SHA256
%ASA-7-725011: Cipher[15] : DHE-RSA-AES128-SHA256
%ASA-7-725011: Cipher[16] : AES128-SHA256
%ASA-7-725011: Cipher[17] : DHE-RSA-AES256-SHA
%ASA-7-725011: Cipher[18] : AES256-SHA
%ASA-7-725011: Cipher[19] : DHE-RSA-AES128-SHA
%ASA-7-725011: Cipher[20] : AES128-SHA
%ASA-7-725008: SSL client outside:10.106.44.166/58946 to 10.106.63.179/443 proposes the following 21 cipher(s)
%ASA-7-725011: Cipher[1] : ECDHE-ECDSA-AES256-GCM-SHA384
%ASA-7-725011: Cipher[2] : ECDHE-RSA-AES256-GCM-SHA384
%ASA-7-725011: Cipher[3] : DHE-RSA-AES256-GCM-SHA384
%ASA-7-725011: Cipher[4] : AES256-GCM-SHA384
%ASA-7-725011: Cipher[5] : ECDHE-ECDSA-AES256-SHA384
%ASA-7-725011: Cipher[6] : ECDHE-RSA-AES256-SHA384
%ASA-7-725011: Cipher[7] : DHE-RSA-AES256-SHA256
%ASA-7-725011: Cipher[8] : AES256-SHA256
%ASA-7-725011: Cipher[9] : ECDHE-ECDSA-AES128-GCM-SHA256
%ASA-7-725011: Cipher[10] : ECDHE-RSA-AES128-GCM-SHA256
%ASA-7-725011: Cipher[11] : DHE-RSA-AES128-GCM-SHA256
%ASA-7-725011: Cipher[12] : AES128-GCM-SHA256
%ASA-7-725011: Cipher[13] : ECDHE-ECDSA-AES128-SHA256
%ASA-7-725011: Cipher[14] : ECDHE-RSA-AES128-SHA256
%ASA-7-725011: Cipher[15] : DHE-RSA-AES128-SHA256
%ASA-7-725011: Cipher[16] : AES128-SHA256
%ASA-7-725011: Cipher[17] : DHE-RSA-AES256-SHA
%ASA-7-725011: Cipher[18] : AES256-SHA
%ASA-7-725011: Cipher[19] : DHE-RSA-AES128-SHA
%ASA-7-725011: Cipher[20] : AES128-SHA
%ASA-7-725011: Cipher[21] : DES-CBC3-SHA
%ASA-7-725012: Device chooses cipher ECDHE-RSA-AES256-GCM-SHA384 for the SSL session with client outside:10.106.44.166/58946 to 10.106.63.179/443
%ASA-6-725016: Device selects trust-point IDENTITY for client outside:10.106.44.166/58946 to 10.106.63.179/443
%ASA-7-717025: Validating certificate chain containing 1 certificate(s).
%ASA-7-717029: Identified client certificate within certificate chain. serial number: 640000004714E8BC85E51DBFC4000000000047, subject name: cn=dimenet,ou=HTTS,o=Cisco,l=SJ,st=CA,c=US.
%ASA-7-717030: Found a suitable trustpoint IDCERT to validate certificate.
%ASA-6-717022: Certificate was successfully validated. serial number: 640000004714E8BC85E51DBFC4000000000047, subject name: cn=dimenet,ou=HTTS,o=Cisco,l=SJ,st=CA,c=US.
%ASA-6-717028: Certificate chain was successfully validated with warning, revocation status was not checked.
%ASA-6-725002: Device completed SSL handshake with client outside:10.106.44.166/58946 to 10.106.63.179/443 for TLSv1.2 session
%ASA-7-717036: Looking for a tunnel group match based on certificate maps for peer certificate with serial number: 640000004714E8BC85E51DBFC4000000000047, subject name: cn=dimenet,ou=HTTS,o=Cisco,l=SJ,st=CA,c=US, issuer_name: cn=SHERLOCK-CA,dc=calo,dc=lab.
%ASA-4-717037: Tunnel group search using certificate maps failed for peer certificate: serial number: 640000004714E8BC85E51DBFC4000000000047, subject name: cn=dimenet,ou=HTTS,o=Cisco,l=SJ,st=CA,c=US, issuer_name: cn=SHERLOCK-CA,dc=calo,dc=lab.
%ASA-7-113028: Extraction of username from VPN client certificate has been requested. [Request 36]
%ASA-7-113028: Extraction of username from VPN client certificate has started. [Request 36]
%ASA-7-113028: Extraction of username from VPN client certificate has finished successfully. [Request 36]
%ASA-7-113028: Extraction of username from VPN client certificate has completed. [Request 36]
%ASA-6-113009: AAA retrieved default group policy (GroupPolicy_ANYCONNECT-PROFILE) for user = dimenet
%ASA-7-734003: DAP: User dimenet, Addr 10.106.44.166: Session Attribute aaa.cisco.grouppolicy = GroupPolicy_ANYCONNECT-PROFILE
%ASA-7-734003: DAP: User dimenet, Addr 10.106.44.166: Session Attribute aaa.cisco.username = dimenet
%ASA-7-734003: DAP: User dimenet, Addr 10.106.44.166: Session Attribute aaa.cisco.username1 = dimenet
%ASA-7-734003: DAP: User dimenet, Addr 10.106.44.166: Session Attribute aaa.cisco.username2 =
%ASA-7-734003: DAP: User dimenet, Addr 10.106.44.166: Session Attribute aaa.cisco.tunnelgroup = ANYCONNECT_PROFILE
%ASA-6-734001: DAP: User dimenet, Addr 10.106.44.166, Connection AnyConnect: The following DAP records were selected for this connection: DfltAccessPolicy
%ASA-6-113039: Group <GroupPolicy_ANYCONNECT-PROFILE> User <dimenet> IP <10.106.44.166> AnyConnect parent session started.%ASA-6-725016: Device selects trust-point IDENTITY for client outside:10.106.44.166/58946 to 10.106.63.179/443
%ASA-6-302013: Built inbound TCP connection 13542 for outside:10.106.44.166/58952 (10.106.44.166/58952) to identity:10.106.63.179/443 (10.106.63.179/443)
%ASA-6-725001: Starting SSL handshake with client outside:10.106.44.166/58952 to 10.106.63.179/443 for TLS session
%ASA-7-725010: Device supports the following 20 cipher(s)
%ASA-7-725011: Cipher[1] : ECDHE-ECDSA-AES256-GCM-SHA384
%ASA-7-725011: Cipher[2] : ECDHE-RSA-AES256-GCM-SHA384
%ASA-7-725011: Cipher[3] : DHE-RSA-AES256-GCM-SHA384
%ASA-7-725011: Cipher[4] : AES256-GCM-SHA384
%ASA-7-725011: Cipher[5] : ECDHE-ECDSA-AES256-SHA384
%ASA-7-725011: Cipher[6] : ECDHE-RSA-AES256-SHA384
%ASA-7-725011: Cipher[7] : DHE-RSA-AES256-SHA256
%ASA-7-725011: Cipher[8] : AES256-SHA256
%ASA-7-725011: Cipher[9] : ECDHE-ECDSA-AES128-GCM-SHA256
%ASA-7-725011: Cipher[10] : ECDHE-RSA-AES128-GCM-SHA256
%ASA-7-725011: Cipher[11] : DHE-RSA-AES128-GCM-SHA256
%ASA-7-725011: Cipher[12] : AES128-GCM-SHA256
%ASA-7-725011: Cipher[13] : ECDHE-ECDSA-AES128-SHA256
%ASA-7-725011: Cipher[14] : ECDHE-RSA-AES128-SHA256
%ASA-7-725011: Cipher[15] : DHE-RSA-AES128-SHA256
%ASA-7-725011: Cipher[16] : AES128-SHA256
%ASA-7-725011: Cipher[17] : DHE-RSA-AES256-SHA
%ASA-7-725011: Cipher[18] : AES256-SHA
%ASA-7-725011: Cipher[19] : DHE-RSA-AES128-SHA
%ASA-7-725011: Cipher[20] : AES128-SHA
%ASA-7-725008: SSL client outside:10.106.44.166/58952 to 10.106.63.179/443 proposes the following 21 cipher(s)
%ASA-7-725011: Cipher[1] : ECDHE-RSA-AES256-GCM-SHA384
%ASA-7-725011: Cipher[2] : ECDHE-ECDSA-AES256-GCM-SHA384
%ASA-7-725011: Cipher[3] : ECDHE-RSA-AES256-SHA384
%ASA-7-725011: Cipher[4] : ECDHE-ECDSA-AES256-SHA384
%ASA-7-725011: Cipher[5] : DHE-RSA-AES256-GCM-SHA384
%ASA-7-725011: Cipher[6] : DHE-RSA-AES256-SHA256
%ASA-7-725011: Cipher[7] : DHE-RSA-AES256-SHA
%ASA-7-725011: Cipher[8] : AES256-GCM-SHA384
%ASA-7-725011: Cipher[9] : AES256-SHA256
%ASA-7-725011: Cipher[10] : AES256-SHA
%ASA-7-725011: Cipher[11] : ECDHE-RSA-AES128-GCM-SHA256
%ASA-7-725011: Cipher[12] : ECDHE-ECDSA-AES128-GCM-SHA256
%ASA-7-725011: Cipher[13] : ECDHE-RSA-AES128-SHA256
%ASA-7-725011: Cipher[14] : ECDHE-ECDSA-AES128-SHA256
%ASA-7-725011: Cipher[15] : DHE-RSA-AES128-GCM-SHA256
%ASA-7-725011: Cipher[16] : DHE-RSA-AES128-SHA256
%ASA-7-725011: Cipher[17] : DHE-RSA-AES128-SHA
%ASA-7-725011: Cipher[18] : AES128-GCM-SHA256
%ASA-7-725011: Cipher[19] : AES128-SHA256
%ASA-7-725011: Cipher[20] : AES128-SHA
%ASA-7-725011: Cipher[21] : DES-CBC3-SHA
%ASA-7-725012: Device chooses cipher ECDHE-RSA-AES256-GCM-SHA384 for the SSL session with client outside:10.106.44.166/58952 to 10.106.63.179/443
%ASA-6-725016: Device selects trust-point IDENTITY for client outside:10.106.44.166/58952 to 10.106.63.179/443
%ASA-7-725017: No certificates received during the handshake with client outside:10.106.44.166/58952 to 10.106.63.179/443 for DTLSv1 session
%ASA-6-725002: Device completed SSL handshake with client outside:10.106.44.166/58952 to 10.106.63.179/443 for TLSv1.2 session
%ASA-7-737035: IPAA: Session=0x0002f000, 'IPv4 address request' message queued
%ASA-7-737035: IPAA: Session=0x0002f000, 'IPv6 address request' message queued
%ASA-7-737001: IPAA: Session=0x0002f000, Received message 'IPv4 address request'
%ASA-5-737003: IPAA: Session=0x0002f000, DHCP configured, no viable servers found for tunnel-group 'ANYCONNECT_PROFILE'
%ASA-6-737026: IPAA: Session=0x0002f000, Client assigned 192.168.100.1 from local pool
%ASA-6-737006: IPAA: Session=0x0002f000, Local pool request succeeded for tunnel-group 'ANYCONNECT_PROFILE'
%ASA-7-737001: IPAA: Session=0x0002f000, Received message 'IPv6 address request'
%ASA-5-737034: IPAA: Session=0x0002f000, IPv6 address: no IPv6 address available from local pools
%ASA-5-737034: IPAA: Session=0x0002f000, IPv6 address: callback failed during IPv6 request
%ASA-4-722041: TunnelGroup <ANYCONNECT_PROFILE> GroupPolicy <GroupPolicy_ANYCONNECT-PROFILE> User <dimenet> IP <10.106.44.166> No IPv6 address available for SVC connection
%ASA-7-609001: Built local-host outside:192.168.100.1
%ASA-5-722033: Group <GroupPolicy_ANYCONNECT-PROFILE> User <dimenet> IP <10.106.44.166> First TCP SVC connection established for SVC session.
%ASA-6-722022: Group
User
IP <10.106.44.166> TCP SVC connection established without compression
%ASA-7-746012: user-identity: Add IP-User mapping 192.168.100.1 - LOCAL\dimenet Succeeded - VPN user
%ASA-6-722055: Group <GroupPolicy_ANYCONNECT-PROFILE> User <dimenet> IP <10.106.44.166> Client Type: Cisco AnyConnect VPN Agent for Linux 4.6.03049
%ASA-4-722051: Group <GroupPolicy_ANYCONNECT-PROFILE> User <dimenet> IP <10.106.44.166> IPv4 Address <192.168.100.1> IPv6 address <::> assigned to session
%ASA-6-302015: Built inbound UDP connection 13543 for outside:10.106.44.166/42354 (10.106.44.166/42354) to identity:10.106.63.179/443 (10.106.63.179/443)
%ASA-6-725001: Starting SSL handshake with client outside:10.106.44.166/42354 to 10.106.63.179/443 for DTLS session
%ASA-7-609001: Built local-host outside:10.10.10.99
%ASA-6-302016: Teardown UDP connection 13544 for outside:192.168.100.1/60514(LOCAL\dimenet) to outside:10.10.10.99/53 duration 0:00:00 bytes 0 (dimenet)
%ASA-7-609002: Teardown local-host outside:10.10.10.99 duration 0:00:00
%ASA-6-302016: Teardown UDP connection 13543 for outside:10.106.44.166/42354 to identity:10.106.63.179/443 duration 0:00:00 bytes 147
%ASA-6-302015: Built inbound UDP connection 13545 for outside:10.106.44.166/42354 (10.106.44.166/42354) to identity:10.106.63.179/443 (10.106.63.179/443)
%ASA-6-725001: Starting SSL handshake with client outside:10.106.44.166/42354 to 10.106.63.179/443 for DTLS session
%ASA-6-725003: SSL client outside:10.106.44.166/42354 to 10.106.63.179/443 request to resume previous session
%ASA-6-725002: Device completed SSL handshake with client outside:10.106.44.166/42354 to 10.106.63.179/443 for DTLSv0.9 session
%ASA-5-722033: Group <GroupPolicy_ANYCONNECT-PROFILE> User <dimenet> IP <10.106.44.166> First UDP SVC connection established for SVC session.
%ASA-6-722022: Group <GroupPolicy_ANYCONNECT-PROFILE> User <dimenet> IP <10.106.44.166> UDP SVC connection established without compression
%ASA-6-725007: SSL session with client outside:10.106.44.166/58946 to 10.106.63.179/443 terminated
- ASA에서 클라이언트 인증서 인증
debug crypto ca 255
debug crypto ca messages 255
crypto ca 트랜잭션 디버그 255
다음은 ASA에서 성공적인 클라이언트 인증서 인증을 위해 사용하는 샘플 디버깅입니다.
CERT_API: PKI session 0x05ba525b open Successful with type SSL CERT_API: Authenticate session 0x05ba525b, non-blocking cb=0x00007f88839daf00 CERT API thread wakes up! CERT_API: process msg cmd=0, session=0x05ba525b CERT_API: Async locked for session 0x05ba525b CRYPTO_PKI: Begin sorted cert chain ---------Certificate--------: Serial: 640000004714E8BC85E51DBFC4000000000047 Subject: cn=dimenet,ou=HTTS,o=Cisco,l=SJ,st=CA,c=US Issuer: cn=SHERLOCK-CA,dc=calo,dc=lab CRYPTO_PKI: End sorted cert chain CRYPTO_PKI: Cert chain pre-processing: List size is 1, trustpool is not in use CRYPTO_PKI: List pruning is not necessary. CRYPTO_PKI: Sorted chain size is: 1 CRYPTO_PKI: Found ID cert. serial number: 640000004714E8BC85E51DBFC4000000000047, subject name: cn=dimenet,ou=HTTS,o=Cisco,l=SJ,st=CA,c=US CRYPTO_PKI: Verifying certificate with serial number: 640000004714E8BC85E51DBFC4000000000047, subject name: cn=dimenet,ou=HTTS,o=Cisco,l=SJ,st=CA,c=US, issuer_name: cn=SHERLOCK-CA,dc=calo,dc=lab, signature alg: SHA256/RSA. CRYPTO_PKI: Checking to see if an identical cert is already in the database... CRYPTO_PKI(Cert Lookup) issuer="cn=SHERLOCK-CA,dc=calo,dc=lab" serial number=64 00 00 00 47 14 e8 bc 85 e5 1d bf c4 00 00 00 | d...G........... 00 00 47 | ..G CRYPTO_PKI: looking for cert in handle=0x00007f8825ce6c90, digest= 9c 05 9b 71 14 9a 6b 35 35 9f f3 4f c5 eb d8 2a | ...q..k55..O...* CRYPTO_PKI: Cert record not found, returning E_NOT_FOUND CRYPTO_PKI: Cert not found in database. CRYPTO_PKI: Looking for suitable trustpoints for connection type SSL CRYPTO_PKI: Found suitable tp: IDCERT CRYPTO_PKI: Storage context locked by thread CERT API CRYPTO_PKI: Found a suitable authenticated trustpoint IDCERT. CRYPTO_PKI: ExtendedKeyUsage OID = 1.3.6.1.5.5.7.3.2 acceptable for usage type: SSL VPN Peer CRYPTO_PKI:check_key_usage:Key Usage check OK CRYPTO_PKI: Certificate validation: Successful, status: 0 CRYPTO_PKI: bypassing revocation checking based on policy configuration CRYPTO_PKI:Certificate validated. serial number: 640000004714E8BC85E51DBFC4000000000047, subject name: cn=dimenet,ou=HTTS,o=Cisco,l=SJ,st=CA,c=US. CRYPTO_PKI: Storage context released by thread CERT API CRYPTO_PKI: Certificate validated without revocation check CRYPTO_PKI: valid cert with warning. CRYPTO_PKI: valid cert status. CERT_API: calling user callback=0x00007f88839daf00 with status=0(Success) CERT_API: Close session 0x05ba525b asynchronously CERT_API: Async unlocked for session 0x05ba525b CERT_API: process msg cmd=1, session=0x05ba525b CERT_API: Async locked for session 0x05ba525b CERT_API: Async unlocked for session 0x05ba525b CERT API thread sleeps!
- Linux 클라이언트의 AnyConnect 프로세스
Linux 디바이스의 경우 AnyConnect 로그는 이름이 인 파일에서 찾을 수 있습니다syslog경로:/var/log/
다음은 Linux 클라이언트에서 가져온 작업 로그 샘플입니다. 이 명령은 AnyConnect 클라이언트 연결에 대한 라이브 로그를 수집하기 위해 실행할 수 있습니다.
tactest:client$ tail -f /var/log/syslog
Jul 1 08:42:48 machine acvpnui[11774]: An SSL VPN connection to bglanyconnect.cisco.com has been requested by the user. Jul 1 08:42:48 machine acvpnui[11774]: Function: getProfileNameFromHost File: ../../vpn/Api/ProfileMgr.cpp Line: 1250 No profile available for host bglanyconnect.cisco.com. Jul 1 08:42:48 machine acvpnui[11774]: Function: getHostInitSettings File: ../../vpn/Api/ProfileMgr.cpp Line: 1334 Profile () not found. Using default settings. Jul 1 08:42:48 machine acvpnui[11774]: Function: loadProfiles File: ../../vpn/Api/ProfileMgr.cpp Line: 189 No profile is available. Jul 1 08:42:48 machine acvpnui[11774]: Function: getProfileNameFromHost File: ../../vpn/Api/ProfileMgr.cpp Line: 1250 No profile available for host bglanyconnect.cisco.com. Jul 1 08:42:48 machine acvpnui[11774]: Using default preferences. Some settings (e.g. certificate matching) may not function as expected if a local profile is expected to be used. Verify that the selected host is in the server list section of the profile and that the profile is configured on the secure gateway. Jul 1 08:42:48 machine acvpnui[11774]: Function: setConnectionData File: ../../vpn/Api/ConnectMgr.cpp Line: 2015 Resetting certificate list. Jul 1 08:42:48 machine acvpnui[11774]: Function: getProfileNameFromHost File: ../../vpn/Api/ProfileMgr.cpp Line: 1250 No profile available for host bglanyconnect.cisco.com. Jul 1 08:42:48 machine acvpnui[11774]: Function: getHostInitSettings File: ../../vpn/Api/ProfileMgr.cpp Line: 1334 Profile () not found. Using default settings. Jul 1 08:42:48 machine acvpnui[11774]: Function: getCertList File: ../../vpn/Api/ApiCert.cpp Line: 497 Number of certificates found: 1 Jul 1 08:42:48 machine acvpnui[11774]: Function: getProfileNameFromHost File: ../../vpn/Api/ProfileMgr.cpp Line: 1250 No profile available for host bglanyconnect.cisco.com. Jul 1 08:42:48 machine acvpnui[11774]: Function: getHostInitSettings File: ../../vpn/Api/ProfileMgr.cpp Line: 1334 Profile () not found. Using default settings. Jul 1 08:42:48 machine acvpnui[11774]: Function: setConnectionData File: ../../vpn/Api/ConnectMgr.cpp Line: 2148 Using certificate which matched stored preferences Jul 1 08:42:48 machine acvpnui[11774]: Function: setConnectionData File: ../../vpn/Api/ConnectMgr.cpp Line: 2287 Certificate retrieved from preferences: Subject Name: C=US, ST=CA, L=SJ, O=Cisco, OU=HTTS, CN=dimenet Issuer Name : DC=lab, DC=calo, CN=SHERLOCK-CA Store : PEM File User Jul 1 08:42:48 machine acvpnui[11774]: Message type information sent to the user: Contacting bglanyconnect.cisco.com. Jul 1 08:42:48 machine acvpnui[11774]: Initiating VPN connection to the secure gateway https://bglanyconnect.cisco.com Jul 1 08:42:48 machine acvpnagent[1785]: Using default preferences. Some settings (e.g. certificate matching) may not function as expected if a local profile is expected to be used. Verify that the selected host is in the server list section of the profile and that the profile is configured on the secure gateway. Jul 1 08:42:48 machine acvpnagent[1785]: Function: processConnectNotification File: ../../vpn/Agent/MainThread.cpp Line: 13590 Received connect notification (host bglanyconnect.cisco.com, profile N/A) Jul 1 08:42:48 machine acvpnagent[1785]: Function: getDnsConfiguration File: ../../vpn/Common/Utility/NetInterface_unix.cpp Line: 1247 Unable to get domain list for interface ens32. Jul 1 08:42:48 machine acvpnagent[1785]: message repeated 2 times: [ Function: getDnsConfiguration File: ../../vpn/Common/Utility/NetInterface_unix.cpp Line: 1247 Unable to get domain list for interface ens32.] Jul 1 08:42:48 machine acvpnagent[1785]: Function: resolveHostName File: ../../vpn/Common/Utility/HostLocator.cpp Line: 721 Invoked Function: CHostLocator::resolveHostNameAlt Return Code: -29229035 (0xFE420015) Description: DNSREQUEST_ERROR_EMPTY_RESPONSE Jul 1 08:42:48 machine acvpnagent[1785]: Function: getHostIPAddrByName File: ../../vpn/Common/IPC/SocketSupport.cpp Line: 344 Invoked Function: ::getaddrinfo Return Code: 11 (0x0000000B) Description: unknown Jul 1 08:42:48 machine acvpnagent[1785]: Function: resolveHostName File: ../../vpn/Common/Utility/HostLocator.cpp Line: 733 Invoked Function: CSocketSupport::getHostIPAddrByName Return Code: -31129588 (0xFE25000C) Description: SOCKETSUPPORT_ERROR_GETADDRINFO Jul 1 08:42:48 machine acvpnagent[1785]: Function: ResolveHostname File: ../../vpn/Common/Utility/HostLocator.cpp Line: 843 Invoked Function: CHostLocator::resolveHostName Return Code: -31129588 (0xFE25000C) Description: SOCKETSUPPORT_ERROR_GETADDRINFO failed to resolve host name bglanyconnect.cisco.com to IPv6 address Jul 1 08:42:48 machine acvpnagent[1785]: Function: logResolutionResult File: ../../vpn/Common/Utility/HostLocator.cpp Line: 927 Host bglanyconnect.cisco.com has been resolved to IP address 10.106.63.179 Jul 1 08:42:48 machine acvpnagent[1785]: Writing to hosts file: 10.106.63.179#011bglanyconnect.cisco.com ###Cisco AnyConnect VPN client modified this file. Please do not modify contents until this comment is removed. Jul 1 08:42:48 machine acvpnagent[1785]: Function: respondToConnectNotification File: ../../vpn/Agent/MainThread.cpp Line: 5831 The requested VPN connection to bglanyconnect.cisco.com will target the following IP protocols and addresses: primary - IPv4 (address 10.106.63.179), secondary - N/A. Jul 1 08:42:48 machine acvpnagent[1785]: Function: determineAcidexMacAddrMapForTlv File: ../../vpn/Agent/MainThread.cpp Line: 6143 [ACIDEX] Determined public interface MAC address 00-50-56-bd-87-1f (interface IPv4 address: 10.106.44.166) Jul 1 08:42:48 machine acvpnui[11774]: Function: getUserName File: ../../vpn/Api/CTransportCurlStatic.cpp Line: 2249 PasswordEntry username is tactest Jul 1 08:42:48 machine acvpnui[11774]: Function: findProfile File: ../../vpn/CommonCrypt/Certificates/NSSCertUtils.cpp Line: 666 NSS Profile directory: /home/tactest/.mozilla/firefox/6ai2dwqd.default Jul 1 08:42:48 machine acvpnui[11774]: Function: InitNSS File: ../../vpn/CommonCrypt/Certificates/NSSCertUtils.cpp Line: 408 Invoked Function: NSS_Initialize Return Code: -8015 (0xFFFFE0B1) Description: unknown Unknown Jul 1 08:42:48 machine acvpnui[11774]: Function: CNSSCertStore File: ../../vpn/CommonCrypt/Certificates/NSSCertStore.cpp Line: 76 Invoked Function: CNSSCertUtils::InitNSS Return Code: -31457269 (0xFE20000B) Description: CERTSTORE_ERROR_PROVIDER_ERROR Jul 1 08:42:48 machine acvpnui[11774]: Function: addNSSStore File: ../../vpn/CommonCrypt/Certificates/CollectiveCertStore.cpp Line: 1874 Invoked Function: CNSSCertStore::CNSSCertStore Return Code: -31457269 (0xFE20000B) Description: CERTSTORE_ERROR_PROVIDER_ERROR Jul 1 08:42:48 machine acvpnui[11774]: Function: OpenStores File: ../../vpn/CommonCrypt/Certificates/CollectiveCertStore.cpp Line: 449 Invoked Function: CCollectiveCertStore::addNSSStore Return Code: -31457269 (0xFE20000B) Description: CERTSTORE_ERROR_PROVIDER_ERROR Jul 1 08:42:48 machine acvpnui[11774]: Function: verify_callback File: ../../vpn/CommonCrypt/Certificates/FileCertificate.cpp Line: 417 Invoked Function: X509_verify_cert Return Code: 0 (0x00000000) Description: ok Jul 1 08:42:48 machine acvpnui[11774]: Function: verify_callback File: ../../vpn/CommonCrypt/Certificates/FileCertificate.cpp Line: 417 Invoked Function: X509_verify_cert Return Code: 0 (0x00000000) Description: ok Jul 1 08:42:48 machine acvpnui[11774]: Function: PeerCertVerifyCB File: ../../vpn/Api/CTransportCurlStatic.cpp Line: 959 Return success from VerifyServerCertificate Jul 1 08:42:48 machine acvpnui[11774]: Function: processResponseStringFromSG File: ../../vpn/Api/ConnectMgr.cpp Line: 11991 Client certificate requested by peer (via AggAuth) Jul 1 08:42:48 machine acvpnui[11774]: Function: getUserName File: ../../vpn/Api/CTransportCurlStatic.cpp Line: 2249 PasswordEntry username is tactest Jul 1 08:42:48 machine acvpnui[11774]: Function: findProfile File: ../../vpn/CommonCrypt/Certificates/NSSCertUtils.cpp Line: 666 NSS Profile directory: /home/tactest/.mozilla/firefox/6ai2dwqd.default Jul 1 08:42:48 machine acvpnui[11774]: Function: InitNSS File: ../../vpn/CommonCrypt/Certificates/NSSCertUtils.cpp Line: 408 Invoked Function: NSS_Initialize Return Code: -8015 (0xFFFFE0B1) Description: unknown Unknown Jul 1 08:42:48 machine acvpnui[11774]: Function: CNSSCertStore File: ../../vpn/CommonCrypt/Certificates/NSSCertStore.cpp Line: 76 Invoked Function: CNSSCertUtils::InitNSS Return Code: -31457269 (0xFE20000B) Description: CERTSTORE_ERROR_PROVIDER_ERROR Jul 1 08:42:48 machine acvpnui[11774]: Function: addNSSStore File: ../../vpn/CommonCrypt/Certificates/CollectiveCertStore.cpp Line: 1874 Invoked Function: CNSSCertStore::CNSSCertStore Return Code: -31457269 (0xFE20000B) Description: CERTSTORE_ERROR_PROVIDER_ERROR Jul 1 08:42:48 machine acvpnui[11774]: Function: OpenStores File: ../../vpn/CommonCrypt/Certificates/CollectiveCertStore.cpp Line: 449 Invoked Function: CCollectiveCertStore::addNSSStore Return Code: -31457269 (0xFE20000B) Description: CERTSTORE_ERROR_PROVIDER_ERROR Jul 1 08:42:48 machine acvpnui[11774]: Function: verify_callback File: ../../vpn/CommonCrypt/Certificates/FileCertificate.cpp Line: 417 Invoked Function: X509_verify_cert Return Code: 0 (0x00000000) Description: ok Jul 1 08:42:48 machine acvpnui[11774]: Function: verify_callback File: ../../vpn/CommonCrypt/Certificates/FileCertificate.cpp Line: 417 Invoked Function: X509_verify_cert Return Code: 0 (0x00000000) Description: ok Jul 1 08:42:48 machine acvpnui[11774]: Function: PeerCertVerifyCB File: ../../vpn/Api/CTransportCurlStatic.cpp Line: 959 Return success from VerifyServerCertificate Jul 1 08:42:48 machine acvpnui[11774]: Function: ClientCertSetCB File: ../../vpn/Api/CTransportCurlStatic.cpp Line: 1063 Client certificate requested by peer Jul 1 08:42:48 machine acvpnui[11774]: Function: getUserName File: ../../vpn/Api/CTransportCurlStatic.cpp Line: 2249 PasswordEntry username is tactest Jul 1 08:42:48 machine acvpnui[11774]: Function: findProfile File: ../../vpn/CommonCrypt/Certificates/NSSCertUtils.cpp Line: 666 NSS Profile directory: /home/tactest/.mozilla/firefox/6ai2dwqd.default Jul 1 08:42:48 machine acvpnui[11774]: Function: InitNSS File: ../../vpn/CommonCrypt/Certificates/NSSCertUtils.cpp Line: 408 Invoked Function: NSS_Initialize Return Code: -8015 (0xFFFFE0B1) Description: unknown Unknown Jul 1 08:42:48 machine acvpnui[11774]: Function: CNSSCertStore File: ../../vpn/CommonCrypt/Certificates/NSSCertStore.cpp Line: 76 Invoked Function: CNSSCertUtils::InitNSS Return Code: -31457269 (0xFE20000B) Description: CERTSTORE_ERROR_PROVIDER_ERROR Jul 1 08:42:48 machine acvpnui[11774]: Function: addNSSStore File: ../../vpn/CommonCrypt/Certificates/CollectiveCertStore.cpp Line: 1874 Invoked Function: CNSSCertStore::CNSSCertStore Return Code: -31457269 (0xFE20000B) Description: CERTSTORE_ERROR_PROVIDER_ERROR Jul 1 08:42:48 machine acvpnui[11774]: Function: OpenStores File: ../../vpn/CommonCrypt/Certificates/CollectiveCertStore.cpp Line: 449 Invoked Function: CCollectiveCertStore::addNSSStore Return Code: -31457269 (0xFE20000B) Description: CERTSTORE_ERROR_PROVIDER_ERROR Jul 1 08:42:48 machine acvpnui[11774]: Function: GetCertChain File: ../../vpn/CommonCrypt/Certificates/FileCertStore.cpp Line: 618 Invoked Function: enumerateCert Return Code: -31457266 (0xFE20000E) Description: CERTSTORE_ERROR_CERT_NOT_FOUND Jul 1 08:42:48 machine acvpnui[11774]: Function: ProcessPromptData File: ../../vpn/Api/SDIMgr.cpp Line: 336 Authentication is not token based (OTP). Jul 1 08:42:48 machine acvpnui[11774]: Function: getProfileNameFromHost File: ../../vpn/Api/ProfileMgr.cpp Line: 1250 No profile available for host bglanyconnect.cisco.com. Jul 1 08:42:48 machine acvpnui[11774]: Function: getHostInitSettings File: ../../vpn/Api/ProfileMgr.cpp Line: 1334 Profile () not found. Using default settings. Jul 1 08:42:48 machine acvpnui[11774]: Message type prompt sent to the user: Your client certificate will be used for authentication Jul 1 08:42:50 machine acvpnui[11774]: Function: userResponse File: ../../vpn/Api/ConnectMgr.cpp Line: 1606 Processing user response. Jul 1 08:42:50 machine acvpnui[11774]: Function: processIfcData File: ../../vpn/Api/ConnectMgr.cpp Line: 3650 Authentication succeeded Jul 1 08:42:50 machine acvpnui[11774]: VPN state: Connecting Network state: Network Accessible Network control state: Network Access: Available Network type: Undefined Jul 1 08:42:50 machine acvpnui[11774]: Message type information sent to the user: Establishing VPN session... Jul 1 08:42:50 machine acvpnui[11774]: Function: getProfileConfiguredOnSG File: ../../vpn/Api/ConnectMgr.cpp Line: 10896 VPN Profile Manifest entry not present Jul 1 08:42:50 machine acvpnui[11774]: Function: initiateTunnel File: ../../vpn/Api/ConnectMgr.cpp Line: 11279 Invoked Function: ConnectMgr::getProfileConfiguredOnSG Return Code: -29556727 (0xFE3D0009) Description: CONNECTMGR_ERROR_UNEXPECTED Jul 1 08:42:50 machine acvpnui[11774]: Function: launchCachedDownloader File: ../../vpn/Api/ConnectMgr.cpp Line: 8228 Launching Cached Downloader: path: '/opt/cisco/anyconnect/bin/vpndownloader' cmd: '"-ipc#011gc#011-cd"' Jul 1 08:42:50 machine acvpnui[11774]: Function: IsValid File: ../../vpn/CommonCrypt/VerifyFileSignatureOpenSSL.cpp Line: 280 Not validating original name for file (/opt/cisco/anyconnect/bin/vpndownloader) Jul 1 08:42:50 machine acvpnui[11774]: Function: findProfile File: ../../vpn/CommonCrypt/Certificates/NSSCertUtils.cpp Line: 666 NSS Profile directory: /home/tactest/.mozilla/firefox/6ai2dwqd.default Jul 1 08:42:50 machine acvpnui[11774]: Function: InitNSS File: ../../vpn/CommonCrypt/Certificates/NSSCertUtils.cpp Line: 408 Invoked Function: NSS_Initialize Return Code: -8015 (0xFFFFE0B1) Description: unknown Unknown Jul 1 08:42:50 machine acvpnui[11774]: Function: CNSSCertStore File: ../../vpn/CommonCrypt/Certificates/NSSCertStore.cpp Line: 76 Invoked Function: CNSSCertUtils::InitNSS Return Code: -31457269 (0xFE20000B) Description: CERTSTORE_ERROR_PROVIDER_ERROR Jul 1 08:42:50 machine acvpnui[11774]: Function: addNSSStore File: ../../vpn/CommonCrypt/Certificates/CollectiveCertStore.cpp Line: 1874 Invoked Function: CNSSCertStore::CNSSCertStore Return Code: -31457269 (0xFE20000B) Description: CERTSTORE_ERROR_PROVIDER_ERROR Jul 1 08:42:50 machine acvpnui[11774]: Function: OpenStores File: ../../vpn/CommonCrypt/Certificates/CollectiveCertStore.cpp Line: 449 Invoked Function: CCollectiveCertStore::addNSSStore Return Code: -31457269 (0xFE20000B) Description: CERTSTORE_ERROR_PROVIDER_ERROR Jul 1 08:42:50 machine acvpnui[11774]: Function: verify_callback File: ../../vpn/CommonCrypt/Certificates/FileCertificate.cpp Line: 417 Invoked Function: X509_verify_cert Return Code: 0 (0x00000000) Description: ok Jul 1 08:42:50 machine acvpnui[11774]: message repeated 2 times: [ Function: verify_callback File: ../../vpn/CommonCrypt/Certificates/FileCertificate.cpp Line: 417 Invoked Function: X509_verify_cert Return Code: 0 (0x00000000) Description: ok] Jul 1 08:42:50 machine acvpnui[11774]: Server certificate validation was successful Jul 1 08:42:50 machine acvpnui[11774]: Function: launchCachedDownloader File: ../../vpn/Api/ConnectMgr.cpp Line: 8247 Invoked Function: ConnectMgr::launchCachedDownloader Return Code: 0 (0x00000000) Description: Successfully launched the cached downloader Jul 1 08:42:50 machine acvpndownloader[13609]: Cisco AnyConnect Secure Mobility Client Downloader (VPN) started, version 4.6.03049 Jul 1 08:42:50 machine acvpndownloader[13609]: Function: handleInvalidPid File: ../../vpn/Common/FirstInstance.cpp Line: 524 PID file does not exist. Jul 1 08:42:50 machine acvpndownloader[13609]: Function: init File: ../../vpn/Common/i18n/MsgCatalog.cpp Line: 373 initialized catalog: AnyConnect with locale: Jul 1 08:42:50 machine acvpndownloader[13609]: Function: loadProfiles File: ../../vpn/Api/ProfileMgr.cpp Line: 189 No profile is available. Jul 1 08:42:50 machine acvpndownloader[13609]: Function: invokePreferenceUpdateCBs File: ../../vpn/Api/PreferenceMgr.cpp Line: 1512 Callback interface address is NULL. Jul 1 08:42:50 machine acvpndownloader[13609]: Current Preference Settings: ServiceDisable: false ShowPreConnectMessage: false AutoConnectOnStart: false MinimizeOnConnect: true LocalLanAccess: false DisableCaptivePortalDetection: false AutoReconnect: true AutoUpdate: true ProxySettings: Native AllowLocalProxyConnections: true PPPExclusion: Disable PPPExclusionServerIP: AutomaticVPNPolicy: false TrustedNetworkPolicy: Disconnect UntrustedNetworkPolicy: Connect TrustedDNSDomains: TrustedDNSServers: TrustedHttpsServerList: EnableScripting: false TerminateScriptOnNextEvent: false EnableAutomaticServerSelection: false AuthenticationTimeout: 12 IPProtocolSupport: IPv4,IPv6 AllowManualHostInput: true BlockUntrustedServers: false PublicProxyServerAddress: CertificatePinning: false Jul 1 08:42:50 machine acvpndownloader[13609]: The AnyConnect Downloader is performing update checks... Jul 1 08:42:50 machine acvpnui[11774]: Message type information sent to the user: The AnyConnect Downloader is performing update checks... Jul 1 08:42:50 machine acvpnui[11774]: Function: processDnldrArgsRequest File: ../../vpn/Api/ConnectMgr.cpp Line: 15162 Determine proxy: false Jul 1 08:42:50 machine acvpnui[11774]: Function: findProfile File: ../../vpn/CommonCrypt/Certificates/NSSCertUtils.cpp Line: 666 NSS Profile directory: /home/tactest/.mozilla/firefox/6ai2dwqd.default Jul 1 08:42:50 machine acvpnui[11774]: Function: InitNSS File: ../../vpn/CommonCrypt/Certificates/NSSCertUtils.cpp Line: 408 Invoked Function: NSS_Initialize Return Code: -8015 (0xFFFFE0B1) Description: unknown Unknown Jul 1 08:42:50 machine acvpnui[11774]: Function: CNSSCertStore File: ../../vpn/CommonCrypt/Certificates/NSSCertStore.cpp Line: 76 Invoked Function: CNSSCertUtils::InitNSS Return Code: -31457269 (0xFE20000B) Description: CERTSTORE_ERROR_PROVIDER_ERROR Jul 1 08:42:50 machine acvpnui[11774]: Function: addNSSStore File: ../../vpn/CommonCrypt/Certificates/CollectiveCertStore.cpp Line: 1874 Invoked Function: CNSSCertStore::CNSSCertStore Return Code: -31457269 (0xFE20000B) Description: CERTSTORE_ERROR_PROVIDER_ERROR Jul 1 08:42:50 machine acvpnui[11774]: Function: OpenStores File: ../../vpn/CommonCrypt/Certificates/CollectiveCertStore.cpp Line: 449 Invoked Function: CCollectiveCertStore::addNSSStore Return Code: -31457269 (0xFE20000B) Description: CERTSTORE_ERROR_PROVIDER_ERROR Jul 1 08:42:50 machine acvpnui[11774]: Function: GetCertChain File: ../../vpn/CommonCrypt/Certificates/FileCertStore.cpp Line: 618 Invoked Function: enumerateCert Return Code: -31457266 (0xFE20000E) Description: CERTSTORE_ERROR_CERT_NOT_FOUND Jul 1 08:42:50 machine acvpndownloader[13609]: Function: getManifestFromConfigXml File: ../../../vpn/Downloader/DownloaderArgs.cpp Line: 657 Language manifest not present Jul 1 08:42:50 machine acvpndownloader[13609]: Function: getManifestFromConfigXml File: ../../../vpn/Downloader/DownloaderArgs.cpp Line: 666 Customization manifest not present Jul 1 08:42:50 machine acvpndownloader[13609]: Function: getManifestFromConfigXml File: ../../../vpn/Downloader/DownloaderArgs.cpp Line: 675 Profile manifest not present Jul 1 08:42:50 machine acvpndownloader[13609]: Function: parseBaseConfig File: ../../../vpn/Downloader/DownloaderArgs.cpp Line: 872 No optional modules in aggregate config xml. Jul 1 08:42:50 machine acvpndownloader[13609]: Function: parseMiscInfo File: ../../../vpn/Downloader/DownloaderArgs.cpp Line: 898 VPN Profile Manifest entry not present Jul 1 08:42:50 machine acvpndownloader[13609]: Function: parseCustomAttributes File: ../../../vpn/Downloader/DownloaderArgs.cpp Line: 937 Custom attribute entry not present Jul 1 08:42:50 machine acvpndownloader[13609]: Function: setHostnameAndPort File: ../../../vpn/Downloader/DownloaderArgs.cpp Line: 545 Defaulting to port 443 Jul 1 08:42:50 machine acvpndownloader[13609]: Connecting to bglanyconnect.cisco.com. Jul 1 08:42:50 machine acvpndownloader[13609]: Authorized Server List is not defined in local policy. Treating bglanyconnect.cisco.com as authorized. Any configured local policy software and profile locks do not apply. Jul 1 08:42:50 machine acvpndownloader[13609]: Checking for profile updates... Jul 1 08:42:50 machine acvpndownloader[13609]: Checking for product updates... Jul 1 08:42:50 machine acvpnui[11774]: Message type information sent to the user: Checking for profile updates... Jul 1 08:42:50 machine acvpndownloader[13609]: Skipping update of AnyConnect Secure Mobility Client 4.6.03049 because an up-to-date version is already installed. Jul 1 08:42:50 machine acvpndownloader[13609]: Skipping update of AnyConnect DART 4.6.03049 because an up-to-date version is already installed. Jul 1 08:42:50 machine acvpndownloader[13609]: Checking for customization updates... Jul 1 08:42:50 machine acvpndownloader[13609]: Performing any required updates... Jul 1 08:42:50 machine acvpndownloader[13609]: The AnyConnect Downloader updates have been completed. Jul 1 08:42:50 machine acvpnagent[1785]: Function: OnIpcMessageReceived File: ../../vpn/Common/IPC/IPCDepot.cpp Line: 1115 Invoked Function: CIpcTransport::OnSocketReadComplete Return Code: -33292279 (0xFE040009) Description: IPCTRANSPORT_ERROR_UNEXPECTED Jul 1 08:42:50 machine acvpndownloader[13609]: Function: Serialize File: ../../vpn/Common/TLV/CertificateInfoTlv.cpp Line: 799 Data to serialize is empty Jul 1 08:42:50 machine acvpndownloader[13609]: Function: Assign File: ../../vpn/Common/TLV/CertificateInfoTlv.cpp Line: 87 Invoked Function: CCertificateInfoTlv::Serialize Return Code: -21954549 (0xFEB1000B) Description: CERTIFICATEINFO_ERROR_NO_DATA:No certificate data was found Jul 1 08:42:50 machine acvpndownloader[13609]: Function: GetAggAuthCertificateInfo File: ../../../vpn/Downloader/DownloaderArgs.cpp Line: 1828 Invoked Function: CCertificateInfoTlv::Assign Return Code: -21954549 (0xFEB1000B) Description: CERTIFICATEINFO_ERROR_NO_DATA:No certificate data was found Jul 1 08:42:50 machine acvpnagent[1785]: Function: GetAggAuthCertificateInfo File: ../../vpn/Common/TLV/startparameters.cpp Line: 1365 Invoked Function: CStartParameters::GetInfoByType Return Code: -32440304 (0xFE110010) Description: TLV_ERROR_NO_ATTRIBUTE Jul 1 08:42:50 machine acvpnagent[1785]: Tunnel initiated by GUI Client. Jul 1 08:42:50 machine acvpnagent[1785]: Using default preferences. Some settings (e.g. certificate matching) may not function as expected if a local profile is expected to be used. Verify that the selected host is in the server list section of the profile and that the profile is configured on the secure gateway. Jul 1 08:42:50 machine acvpnagent[1785]: Function: GetAggAuthCertificateInfo File: ../../vpn/Common/TLV/startparameters.cpp Line: 1365 Invoked Function: CStartParameters::GetInfoByType Return Code: -32440304 (0xFE110010) Description: TLV_ERROR_NO_ATTRIBUTE Jul 1 08:42:50 machine acvpnagent[1785]: Function: Serialize File: ../../vpn/Common/TLV/CertificateInfoTlv.cpp Line: 799 Data to serialize is empty Jul 1 08:42:50 machine acvpnagent[1785]: Function: Assign File: ../../vpn/Common/TLV/CertificateInfoTlv.cpp Line: 87 Invoked Function: CCertificateInfoTlv::Serialize Return Code: -21954549 (0xFEB1000B) Description: CERTIFICATEINFO_ERROR_NO_DATA:No certificate data was found Jul 1 08:42:50 machine acvpnagent[1785]: Function: SetAggAuthCertificateInfo File: ../../vpn/AgentUtilities/vpnparam.cpp Line: 1165 Invoked Function: CCertificateInfoTlv::Assign Return Code: -21954549 (0xFEB1000B) Description: CERTIFICATEINFO_ERROR_NO_DATA:No certificate data was found Jul 1 08:42:50 machine acvpnagent[1785]: Secure Gateway Parameters: Primary IP Address: 10.106.63.179 Secondary IP Address: N/A Domain name: bglanyconnect.cisco.com Port: 443 URL: "https://bglanyconnect.cisco.com:443/CACHE/stc/2/" Auth method: SSL Proxy Server: "" Jul 1 08:42:50 machine acvpnagent[1785]: Initiating Cisco AnyConnect Secure Mobility Client connection, version 4.6.03049 Jul 1 08:42:50 machine acvpnagent[1785]: Function: OnTunnelStateChange File: ../../vpn/Agent/TND.cpp Line: 2030 tunnel state change notification (new 0, old 4) Jul 1 08:42:50 machine acvpnagent[1785]: Function: STLoadLibrary File: ../../vpn/Common/Utility/Win/HModuleMgr.cpp Line: 148 Invoked Function: dlopen Return Code: 0 (0x00000000) Description: libz.so: cannot open shared object file: No such file or directory Jul 1 08:42:50 machine acvpnagent[1785]: Function: LoadLibrary File: ../../vpn/Agent/CZLib.cpp Line: 246 Invoked Function: CHModuleMgr::STLoadLibrary Return Code: -33554425 (0xFE000007) Description: GLOBAL_ERROR_NOT_INITIALIZED Jul 1 08:42:50 machine acvpnagent[1785]: Function: CCstpProtocol File: ../../vpn/Agent/CstpProtocol.cpp Line: 327 Invoked Function: CZLib Return Code: -31981557 (0xFE18000B) Description: CZLIB_ERROR_LOAD_LIBRARY Jul 1 08:42:50 machine acvpnagent[1785]: Function: findProfile File: ../../vpn/CommonCrypt/Certificates/NSSCertUtils.cpp Line: 666 NSS Profile directory: /home/tactest/.mozilla/firefox/6ai2dwqd.default Jul 1 08:42:50 machine acvpnagent[1785]: Function: InitNSS File: ../../vpn/CommonCrypt/Certificates/NSSCertUtils.cpp Line: 408 Invoked Function: NSS_Initialize Return Code: -8015 (0xFFFFE0B1) Description: unknown Unknown Jul 1 08:42:50 machine acvpnagent[1785]: Function: CNSSCertStore File: ../../vpn/CommonCrypt/Certificates/NSSCertStore.cpp Line: 76 Invoked Function: CNSSCertUtils::InitNSS Return Code: -31457269 (0xFE20000B) Description: CERTSTORE_ERROR_PROVIDER_ERROR Jul 1 08:42:50 machine acvpnagent[1785]: Function: addNSSStore File: ../../vpn/CommonCrypt/Certificates/CollectiveCertStore.cpp Line: 1874 Invoked Function: CNSSCertStore::CNSSCertStore Return Code: -31457269 (0xFE20000B) Description: CERTSTORE_ERROR_PROVIDER_ERROR Jul 1 08:42:50 machine acvpnagent[1785]: Function: OpenStores File: ../../vpn/CommonCrypt/Certificates/CollectiveCertStore.cpp Line: 449 Invoked Function: CCollectiveCertStore::addNSSStore Return Code: -31457269 (0xFE20000B) Description: CERTSTORE_ERROR_PROVIDER_ERROR Jul 1 08:42:50 machine acvpnagent[1785]: The Primary SSL connection to the secure gateway is being established. Jul 1 08:42:50 machine acvpnagent[1785]: Function: OnTunnelStateChange File: ../../vpn/Agent/TND.cpp Line: 2030 tunnel state change notification (new 0, old 0) Jul 1 08:42:50 machine acvpnagent[1785]: Function: postSocketConnectProcessing File: ../../vpn/Agent/SslTunnelTransport.cpp Line: 1421 Opened SSL socket from [10.106.44.166]:58980 to [10.106.63.179]:443 Jul 1 08:42:50 machine NetworkManager[940]: <info> [1561984970.2702] manager: (cscotun0): new Tun device (/org/freedesktop/NetworkManager/Devices/16) Jul 1 08:42:50 machine NetworkManager[940]: <info> [1561984970.2730] devices added (path: /sys/devices/virtual/net/cscotun0, iface: cscotun0) Jul 1 08:42:50 machine NetworkManager[940]: <info> [1561984970.2730] device added (path: /sys/devices/virtual/net/cscotun0, iface: cscotun0): no ifupdown configuration found. Jul 1 08:42:50 machine acvpnagent[13620]: Function: findProfile File: ../../vpn/CommonCrypt/Certificates/NSSCertUtils.cpp Line: 666 NSS Profile directory: /home/tactest/.mozilla/firefox/6ai2dwqd.default Jul 1 08:42:50 machine acvpnagent[13620]: Function: InitNSS File: ../../vpn/CommonCrypt/Certificates/NSSCertUtils.cpp Line: 408 Invoked Function: NSS_Initialize Return Code: -8015 (0xFFFFE0B1) Description: unknown Unknown Jul 1 08:42:50 machine acvpnagent[13620]: Function: CNSSCertStore File: ../../vpn/CommonCrypt/Certificates/NSSCertStore.cpp Line: 76 Invoked Function: CNSSCertUtils::InitNSS Return Code: -31457269 (0xFE20000B) Description: CERTSTORE_ERROR_PROVIDER_ERROR Jul 1 08:42:50 machine acvpnagent[13620]: Function: addNSSStore File: ../../vpn/CommonCrypt/Certificates/CollectiveCertStore.cpp Line: 1874 Invoked Function: CNSSCertStore::CNSSCertStore Return Code: -31457269 (0xFE20000B) Description: CERTSTORE_ERROR_PROVIDER_ERROR Jul 1 08:42:50 machine acvpnagent[13620]: Function: OpenStores File: ../../vpn/CommonCrypt/Certificates/CollectiveCertStore.cpp Line: 449 Invoked Function: CCollectiveCertStore::addNSSStore Return Code: -31457269 (0xFE20000B) Description: CERTSTORE_ERROR_PROVIDER_ERROR Jul 1 08:42:50 machine acvpnagent[13620]: Function: findProfile File: ../../vpn/CommonCrypt/Certificates/NSSCertUtils.cpp Line: 666 NSS Profile directory: /home/tactest/.mozilla/firefox/6ai2dwqd.default Jul 1 08:42:50 machine acvpnagent[13620]: Function: InitNSS File: ../../vpn/CommonCrypt/Certificates/NSSCertUtils.cpp Line: 408 Invoked Function: NSS_Initialize Return Code: -8015 (0xFFFFE0B1) Description: unknown Unknown Jul 1 08:42:50 machine acvpnagent[13620]: Function: CNSSCertStore File: ../../vpn/CommonCrypt/Certificates/NSSCertStore.cpp Line: 76 Invoked Function: CNSSCertUtils::InitNSS Return Code: -31457269 (0xFE20000B) Description: CERTSTORE_ERROR_PROVIDER_ERROR Jul 1 08:42:50 machine acvpnagent[13620]: Function: addNSSStore File: ../../vpn/CommonCrypt/Certificates/CollectiveCertStore.cpp Line: 1874 Invoked Function: CNSSCertStore::CNSSCertStore Return Code: -31457269 (0xFE20000B) Description: CERTSTORE_ERROR_PROVIDER_ERROR Jul 1 08:42:50 machine acvpnagent[13620]: Function: OpenStores File: ../../vpn/CommonCrypt/Certificates/CollectiveCertStore.cpp Line: 449 Invoked Function: CCollectiveCertStore::addNSSStore Return Code: -31457269 (0xFE20000B) Description: CERTSTORE_ERROR_PROVIDER_ERROR Jul 1 08:42:50 machine acvpnagent[13620]: Function: init File: ../../vpn/Common/i18n/MsgCatalog.cpp Line: 373 initialized catalog: AnyConnect with locale: Jul 1 08:42:50 machine acvpnagent[13620]: Function: loadProfiles File: ../../vpn/Api/ProfileMgr.cpp Line: 189 No profile is available. Jul 1 08:42:50 machine acvpnagent[13620]: Function: invokePreferenceUpdateCBs File: ../../vpn/Api/PreferenceMgr.cpp Line: 1512 Callback interface address is NULL. Jul 1 08:42:50 machine acvpnagent[13620]: Current Preference Settings: ServiceDisable: false ShowPreConnectMessage: false AutoConnectOnStart: false MinimizeOnConnect: true LocalLanAccess: false DisableCaptivePortalDetection: false AutoReconnect: true AutoUpdate: true ProxySettings: Native AllowLocalProxyConnections: true PPPExclusion: Disable PPPExclusionServerIP: AutomaticVPNPolicy: false TrustedNetworkPolicy: Disconnect UntrustedNetworkPolicy: Connect TrustedDNSDomains: TrustedDNSServers: TrustedHttpsServerList: EnableScripting: false TerminateScriptOnNextEvent: false EnableAutomaticServerSelection: false AuthenticationTimeout: 12 IPProtocolSupport: IPv4,IPv6 AllowManualHostInput: true BlockUntrustedServers: false PublicProxyServerAddress: CertificatePinning: false Jul 1 08:42:50 machine acvpnagent[13620]: Using default preferences. Some settings (e.g. certificate matching) may not function as expected if a local profile is expected to be used. Verify that the selected host is in the server list section of the profile and that the profile is configured on the secure gateway. Jul 1 08:42:50 machine acvpnagent[13620]: Function: GetCertificatePins File: ../../vpn/Api/PreferenceMgr.cpp Line: 1795 Invoked Function: ProfileMgr::GetProfileNameFromAddress Return Code: -26083317 (0xFE72000B) Description: PROFILEMGR_ERROR_HOST_ADDRESS_NOT_FOUND_IN_ANY_PROFILE Server address bglanyconnect.cisco.com not found in any profile. Jul 1 08:42:50 machine acvpnagent[13620]: Function: verify_callback File: ../../vpn/CommonCrypt/Certificates/FileCertificate.cpp Line: 417 Invoked Function: X509_verify_cert Return Code: 0 (0x00000000) Description: ok Jul 1 08:42:50 machine acvpnagent[13620]: Function: verify_callback File: ../../vpn/CommonCrypt/Certificates/FileCertificate.cpp Line: 417 Invoked Function: X509_verify_cert Return Code: 0 (0x00000000) Description: ok Jul 1 08:42:50 machine acvpnagent[1785]: Function: verifyServerCertificate File: ../../vpn/Agent/CertOpenSSLAdapter.cpp Line: 834 certificate confirmation reason=0x0 Jul 1 08:42:50 machine acvpnagent[1785]: A SSL connection has been established using cipher ECDHE-RSA-AES256-GCM-SHA384 Jul 1 08:42:50 machine acvpnagent[1785]: Function: calculateTunnelMTU File: ../../vpn/Agent/CstpProtocol.cpp Line: 2846 The candidate MTU (1399) is derived from the physical interface MTU. Jul 1 08:42:50 machine acvpnagent[1785]: Function: startHTTPNegotiation File: ../../vpn/Agent/CstpProtocol.cpp Line: 1018 Proposed base MTU is 1500. Jul 1 08:42:50 machine acvpnagent[1785]: Current Profile: none Received VPN Session Configuration Settings: Keep Installed: enabled Rekey Method: disabled Proxy Setting: do not modify Proxy Server: none Proxy PAC URL: none Proxy Exceptions: none Proxy Lockdown: enabled IPv4 Split Exclude: disabled IPv6 Split Exclude: disabled IPv4 Dynamic Split Exclude: disabled IPv6 Dynamic Split Exclude: disabled IPv4 Split Include: 1 IPv4 private networks IPv6 Split Include: disabled IPv4 Dynamic Split Include: disabled IPv6 Dynamic Split Include: disabled IPv4 Split DNS: disabled IPv6 Split DNS: disabled Tunnel all DNS: disabled IPv4 Local LAN Wildcard: local LAN access preference is disabled IPv6 Local LAN Wildcard: local LAN access preference is disabled Firewall Rules: none Client Address: 192.168.100.1 Client Mask: 255.255.255.0 Client IPv6 Address: FE80:0:0:0:72F5:2CAF:BCCC:5145 (auto-generated) Client IPv6 Mask: FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFC TLS MTU: 1367 TLS Compression: disabled TLS Keep Alive: 20 seconds TLS Rekey Interval: none TLS DPD: 30 seconds DTLS: enabled DTLS MTU: 1406 DTLS Compression: disabled DTLS Keep Alive: 20 seconds DTLS Rekey Interval: none DTLS DPD: 30 seconds Session Timeout: none Session Timeout Alert Interval: 60 seconds Session Timeout Remaining: none Disconnect Timeout: 1800 seconds Idle Timeout: 1800 seconds Server: ASA (9.9(2)36) MUS Host: unknown DAP User Message: none Quarantine State: disabled Always On VPN: not disabled Lease Duration: 1209600 seconds Default Domain: cisco.com Home page: unknown Smart Card Removal Disconnect: enabled License Response: unknown SG TCP Keep Alive: enabled Peer's Local IPv4 Address: N/A Peer's Local IPv6 Address: N/A Peer's Remote IPv4 Address: N/A Peer's Remote IPv6 Address: N/A Peer's host name: bglanyconnect.cisco.com Client Protocol Bypass: false Jul 1 08:42:50 machine acvpnagent[1785]: The Primary SSL connection to the secure gateway has been established. Jul 1 08:42:50 machine acvpnagent[1785]: Function: OnTunnelStateChange File: ../../vpn/Agent/TND.cpp Line: 2030 tunnel state change notification (new 0, old 0) Jul 1 08:42:50 machine acvpnagent[1785]: Function: addSplitIncludeNetworksForTunnelDnsServers File: ../../vpn/Agent/VpnMgr.cpp Line: 1108 Added split-include network for tunnel DNS server 10.10.10.99 Jul 1 08:42:50 machine acvpnagent[1785]: VPN Adapter Configuration: IPv4 address: 192.168.100.1/24 IPv6 address: FE80:0:0:0:72F5:2CAF:BCCC:5145/126 (auto-generated) Default domain: cisco.com DNS suffixes: N/A DNS servers: 10.10.10.99 WINS servers: N/A MTU: 1406 Jul 1 08:42:50 machine acvpnagent[1785]: Host Configuration: Public address: 10.106.44.166/24 Potential public addresses: 10.106.44.166 Private Address: 192.168.100.1/24 Private IPv6 Address: FE80:0:0:0:72F5:2CAF:BCCC:5145/126 (auto-generated) Remote Peers: 10.106.63.179 (TCP port 443, UDP port 443, source address 10.106.44.166) Private Networks: 2 (10.0.0.0/24, 10.10.10.99/32) Private IPv6 Networks: none Public Networks: none Public IPv6 Networks: none Tunnel Mode: yes Tunnel all DNS: no Jul 1 08:42:50 machine NetworkManager[940]: <info> [1561984970.3025] device (cscotun0): state change: unmanaged -> unavailable (reason 'connection-assumed') [10 20 41] Jul 1 08:42:50 machine acvpnui[11774]: Message type information sent to the user: Checking for product updates... Jul 1 08:42:50 machine acvpnui[11774]: Message type information sent to the user: Checking for customization updates... Jul 1 08:42:50 machine NetworkManager[940]: <info> [1561984970.3046] keyfile: add connection in-memory (c9f1c86e-5e5c-4966-8260-be7e751b642d,"cscotun0") Jul 1 08:42:50 machine acvpnui[11774]: Message type information sent to the user: Performing any required updates... Jul 1 08:42:50 machine NetworkManager[940]: <info> [1561984970.3051] device (cscotun0): state change: unavailable -> disconnected (reason 'connection-assumed') [20 30 41] Jul 1 08:42:50 machine acvpnui[11774]: Message type information sent to the user: The AnyConnect Downloader updates have been completed. Jul 1 08:42:50 machine NetworkManager[940]: <info> [1561984970.3058] device (cscotun0): Activation: starting connection 'cscotun0' (c9f1c86e-5e5c-4966-8260-be7e751b642d) Jul 1 08:42:50 machine acvpnui[11774]: VPN state: Connecting Network state: Network Accessible Network control state: Network Access: Available Network type: Undefined Jul 1 08:42:50 machine acvpnui[11774]: Message type information sent to the user: Establishing VPN session... Jul 1 08:42:50 machine acvpnui[11774]: Message type information sent to the user: Establishing VPN - Initiating connection... Jul 1 08:42:50 machine NetworkManager[940]: <info> [1561984970.3064] device (cscotun0): state change: disconnected -> prepare (reason 'none') [30 40 0] Jul 1 08:42:50 machine acvpnui[11774]: Message type information sent to the user: Establishing VPN - Examining system... Jul 1 08:42:50 machine NetworkManager[940]: <info> [1561984970.3067] device (cscotun0): state change: prepare -> config (reason 'none') [40 50 0] Jul 1 08:42:50 machine acvpnui[11774]: Message type information sent to the user: Establishing VPN - Activating VPN adapter... Jul 1 08:42:50 machine NetworkManager[940]: <info> [1561984970.3068] device (cscotun0): state change: config -> ip-config (reason 'none') [50 70 0] Jul 1 08:42:50 machine acvpnui[11774]: Message type information sent to the user: Establishing VPN - Configuring system... Jul 1 08:42:50 machine NetworkManager[940]: <info> [1561984970.3070] device (cscotun0): state change: ip-config -> ip-check (reason 'none') [70 80 0] Jul 1 08:42:50 machine NetworkManager[940]: <info> [1561984970.3073] device (cscotun0): state change: ip-check -> secondaries (reason 'none') [80 90 0] Jul 1 08:42:50 machine NetworkManager[940]: <info> [1561984970.3075] device (cscotun0): state change: secondaries -> activated (reason 'none') [90 100 0] Jul 1 08:42:50 machine NetworkManager[940]: <info> [1561984970.3111] device (cscotun0): Activation: successful, device activated. Jul 1 08:42:50 machine dbus[935]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' Jul 1 08:42:50 machine systemd[1]: Starting Network Manager Script Dispatcher Service... Jul 1 08:42:50 machine dbus[935]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher' Jul 1 08:42:50 machine systemd[1]: Started Network Manager Script Dispatcher Service. Jul 1 08:42:50 machine nm-dispatcher: req:1 'up' [cscotun0]: new request (1 scripts) Jul 1 08:42:50 machine nm-dispatcher: req:1 'up' [cscotun0]: start running ordered scripts... Jul 1 08:42:50 machine acvpnagent[1785]: Function: getDnsConfiguration File: ../../vpn/Common/Utility/NetInterface_unix.cpp Line: 1247 Unable to get domain list for interface ens32. Jul 1 08:42:50 machine acvpnagent[1785]: Function: getDnsConfiguration File: ../../vpn/Common/Utility/NetInterface_unix.cpp Line: 1247 Unable to get domain list for interface cscotun0. Jul 1 08:42:50 machine acvpnagent[1785]: Function: getDnsConfiguration File: ../../vpn/Common/Utility/NetInterface_unix.cpp Line: 1247 Unable to get domain list for interface ens32. Jul 1 08:42:50 machine acvpnagent[1785]: Function: getDnsConfiguration File: ../../vpn/Common/Utility/NetInterface_unix.cpp Line: 1247 Unable to get domain list for interface ens32. Jul 1 08:42:50 machine acvpnagent[1785]: Function: getDnsConfiguration File: ../../vpn/Common/Utility/NetInterface_unix.cpp Line: 1247 Unable to get domain list for interface cscotun0. Jul 1 08:42:50 machine NetworkManager[940]: <info> [1561984970.6920] policy: set 'cscotun0' (cscotun0) as default for IPv6 routing and DNS Jul 1 08:42:51 machine acvpnagent[1785]: Function: getDnsConfiguration File: ../../vpn/Common/Utility/NetInterface_unix.cpp Line: 1247 Unable to get domain list for interface ens32. Jul 1 08:42:51 machine acvpnagent[1785]: Function: getDnsConfiguration File: ../../vpn/Common/Utility/NetInterface_unix.cpp Line: 1247 Unable to get domain list for interface cscotun0. Jul 1 08:42:51 machine acvpnagent[1785]: Function: getDnsConfiguration File: ../../vpn/Common/Utility/NetInterface_unix.cpp Line: 1247 Unable to get domain list for interface ens32. Jul 1 08:42:51 machine acvpnagent[1785]: Function: getDnsConfiguration File: ../../vpn/Common/Utility/NetInterface_unix.cpp Line: 1247 Unable to get domain list for interface ens32. Jul 1 08:42:51 machine systemd[1]: Reloading OpenBSD Secure Shell server. Jul 1 08:42:51 machine systemd[1]: Reloaded OpenBSD Secure Shell server. Jul 1 08:42:51 machine acvpnagent[1785]: Function: getDnsConfiguration File: ../../vpn/Common/Utility/NetInterface_unix.cpp Line: 1247 Unable to get domain list for interface cscotun0. Jul 1 08:42:52 machine acvpnagent[1785]: Function: applyFirewallConfiguration File: ../../vpn/AgentUtilities/HostConfigMgr.cpp Line: 1187 No Firewall Rules to configure Jul 1 08:42:52 machine acvpnagent[1785]: The network control state changed to restricted. Jul 1 08:42:52 machine acvpnui[11774]: Message type information sent to the user: Establishing VPN... Jul 1 08:42:52 machine acvpnui[11774]: Function: setSessionInfo File: ../../vpn/Api/VPNStatsBase.cpp Line: 1097 Invoked Function: CSessionInfoTlv::GetAppliedSecureRouteCount Return Code: -32440304 (0xFE110010) Description: TLV_ERROR_NO_ATTRIBUTE Jul 1 08:42:52 machine acvpnui[11774]: Function: setSessionInfo File: ../../vpn/Api/VPNStatsBase.cpp Line: 1204 Invoked Function: CSessionInfoTlv::GetAppliedNonsecureRouteCount Return Code: -32440304 (0xFE110010) Description: TLV_ERROR_NO_ATTRIBUTE Jul 1 08:42:52 machine acvpnui[11774]: VPN state: Connected Network state: Network Accessible Network control state: Network Access: Restricted Network type: Undefined Jul 1 08:42:52 machine acvpnui[11774]: Using default preferences. Some settings (e.g. certificate matching) may not function as expected if a local profile is expected to be used. Verify that the selected host is in the server list section of the profile and that the profile is configured on the secure gateway. Jul 1 08:42:52 machine acvpnui[11774]: Function: getProfileNameFromHost File: ../../vpn/Api/ProfileMgr.cpp Line: 1250 No profile available for host bglanyconnect.cisco.com. Jul 1 08:42:52 machine acvpnui[11774]: Function: getHostInitSettings File: ../../vpn/Api/ProfileMgr.cpp Line: 1334 Profile () not found. Using default settings. Jul 1 08:42:52 machine acvpnui[11774]: Message type information sent to the user: Connected to bglanyconnect.cisco.com. Jul 1 08:42:52 machine acvpnagent[1785]: Function: OnTunnelStateChange File: ../../vpn/Agent/TND.cpp Line: 2030 tunnel state change notification (new 1, old 0) Jul 1 08:42:52 machine acvpnagent[1785]: The VPN connection has been established and can now pass data. Jul 1 08:42:52 machine acvpnagent[1785]: The Primary DTLS connection to the secure gateway is being established. Jul 1 08:42:52 machine acvpnagent[1785]: Function: OnTunnelStateChange File: ../../vpn/Agent/TND.cpp Line: 2030 tunnel state change notification (new 1, old 1) Jul 1 08:42:52 machine acvpnagent[1785]: Function: initiateTransport File: ../../vpn/Agent/DtlsTunnelTransport.cpp Line: 238 Opened DTLS socket from [10.106.44.166]:35312 to [10.106.63.179]:443 Jul 1 08:42:52 machine acvpndownloader[13609]: Function: WaitForCompletion File: ../../vpn/Common/Utility/Thread.cpp Line: 311 The thread has successfully completed execution. Jul 1 08:42:52 machine acvpndownloader[13609]: Cisco AnyConnect Secure Mobility Client Downloader (VPN) exiting, version 4.6.03049 , return code 0 [0x00000000] Jul 1 08:42:52 machine acvpnagent[1785]: A routing table change notification has been received. Starting automatic correction of the routing table. Jul 1 08:42:52 machine acvpnagent[1785]: Automatic correction of the routing table has been successful. Jul 1 08:42:52 machine acvpnagent[1785]: Function: OnIpcMessageReceived File: ../../vpn/Common/IPC/IPCDepot.cpp Line: 1115 Invoked Function: CIpcTransport::OnSocketReadComplete Return Code: -33292279 (0xFE040009) Description: IPCTRANSPORT_ERROR_UNEXPECTED Jul 1 08:42:52 machine acvpnagent[1785]: Function: writeSocketBlocking File: ../../vpn/Common/IPC/UdpTcpTransports_unix.cpp Line: 429 Invoked Function: ::write Return Code: 32 (0x00000020) Description: unknown Jul 1 08:42:52 machine acvpnagent[1785]: Function: terminateIpcConnection File: ../../vpn/Common/IPC/IPCTransport.cpp Line: 459 Invoked Function: CSocketTransport::writeSocketBlocking Return Code: -31588341 (0xFE1E000B) Description: SOCKETTRANSPORT_ERROR_WRITE Jul 1 08:42:52 machine acvpnagent[1785]: A DTLS connection has been established using cipher DHE-RSA-AES256-SHA Jul 1 08:42:52 machine acvpnagent[1785]: The Primary DTLS connection to the secure gateway has been established. Jul 1 08:42:52 machine acvpnui[11774]: Function: launchCachedDownloader File: ../../vpn/Api/ConnectMgr.cpp Line: 8274 Invoked Function: ConnectMgr::launchCachedDownloader Return Code: 0 (0x00000000) Description: Cached Downloader terminated normally Jul 1 08:42:52 machine acvpnui[11774]: Using default preferences. Some settings (e.g. certificate matching) may not function as expected if a local profile is expected to be used. Verify that the selected host is in the server list section of the profile and that the profile is configured on the secure gateway. Jul 1 08:42:52 machine acvpnui[11774]: Function: getProfileNameFromHost File: ../../vpn/Api/ProfileMgr.cpp Line: 1250 No profile available for host bglanyconnect.cisco.com. Jul 1 08:42:52 machine acvpnui[11774]: message repeated 2 times: [ Function: getProfileNameFromHost File: ../../vpn/Api/ProfileMgr.cpp Line: 1250 No profile available for host bglanyconnect.cisco.com.] Jul 1 08:42:52 machine acvpnui[11774]: Function: reloadPreferencesAfterUpdates File: ../../vpn/Api/ConnectMgr.cpp Line: 10859 Secure gateway (bglanyconnect.cisco.com) was not found in profile . Jul 1 08:42:52 machine acvpnui[11774]: Function: getProfileNameFromHost File: ../../vpn/Api/ProfileMgr.cpp Line: 1250 No profile available for host bglanyconnect.cisco.com. Jul 1 08:42:52 machine acvpnui[11774]: Function: getHostInitSettings File: ../../vpn/Api/ProfileMgr.cpp Line: 1334 Profile () not found. Using default settings. Jul 1 08:42:52 machine acvpnui[11774]: Function: getProfileNameFromHost File: ../../vpn/Api/ProfileMgr.cpp Line: 1250 No profile available for host bglanyconnect.cisco.com. Jul 1 08:42:52 machine acvpnui[11774]: Function: getHostInitSettings File: ../../vpn/Api/ProfileMgr.cpp Line: 1334 Profile () not found. Using default settings. Jul 1 08:42:52 machine acvpnui[11774]: VPN state: Connected Network state: Network Accessible Network control state: Network Access: Restricted Network type: Undefined Jul 1 08:42:52 machine acvpnagent[1785]: Function: OnTunnelStateChange File: ../../vpn/Agent/TND.cpp Line: 2030 tunnel state change notification (new 1, old 1) Jul 1 08:42:53 machine systemd[1]: Reloading OpenBSD Secure Shell server. Jul 1 08:42:53 machine systemd[1]: Reloaded OpenBSD Secure Shell server. Jul 1 08:42:53 machine acvpnui[11774]: Message type information sent to the user: Connected to bglanyconnect.cisco.com.
- Linux 클라이언트의 DART(Diagnostic and Reporting Tool)
Windows 및 MAC과 마찬가지로 Linux 클라이언트에도 DART가 있습니다 제공합니다. 이는 GUI 또는 CLI에서 사용할 수 있습니다.
Linux 클라이언트에서 전체 로그를 수집하려면 관리자 사용자로 DART를 실행해야 합니다.
1. 명령줄에서 다음 경로로 이동하여 DART를 실행할 수 있습니다.
tactest:bin$ cd /opt/cisco/anyconnect/dart tactest:dart$ ls anyconnect-linux64-4.6.03049-dart-webdeploy-k9-20190627095410.log dartui xml dartcli resources tactest:dart$ ./dartcli Cisco AnyConnect Diagnostic and Reporting Tool 4.6.03049 . Copyright (c) 2008 - 2018 Cisco Systems, Inc. All Rights Reserved. Bundle option selected: default Bundle location: /home/tactest/Desktop/DARTBundle_0701_0933.zip Parsing request and configuration XMLs... 1%iptables v1.6.0: can't initialize iptables table `filter': Permission denied (you must be root) Perhaps iptables or your kernel needs to be upgraded. ip6tables v1.6.0: can't initialize ip6tables table `filter': Permission denied (you must be root) Perhaps ip6tables or your kernel needs to be upgraded. Processing Posture application logs... 76%sh: 1: /home/tactest/.cisco/hostscan/lib/wadiagnose: not found sh: 1: /opt/cisco/hostscan/lib/wadiagnose: not found DART has finished... 100%
2. GUI에서 DART를 실행하려면anyconnectlinux GUI에서 Cisco DART를 클릭하고 지침을 수행합니다. 수집된 DART 번들은 데스크톱에 저장됩니다.
3. Linux 클라이언트에서 워크스테이션으로 DART 번들을 복사하려면 다음 명령을 사용합니다.scp username@10.106.44.166:/home//Desktop/DARTBundle_0701_0945.zip /Users/dmoudgil/Desktop/Ubuntu/
다른 OS의 DART에 대한 참조용 문서: Anyconnect용 DART 번들을 수집하는 방법 - 알 수 없는 문제가 발생할 경우 다음 명령줄에서 VPN 클라이언트를 다시 시작할 수 있습니다.
tactest:bin$ sudo /etc/init.d/vpnagentd restart [sudo] password for tactest: [ ok ] Restarting vpnagentd (via systemctl): vpnagentd.service. tactest:bin$
개정 이력
| 개정 | 게시 날짜 | 의견 |
|---|---|---|
2.0 |
12-Dec-2022 |
현재의 Cisco 출판 표준을 준수하도록 개정되었습니다. |
1.0 |
09-Jul-2019 |
최초 릴리스 |
피드백