Installation and Configuration Guide for the CiscoWorks Wireless LAN Solution Engine, 2.0
Specifications for the CiscoWorks 1130 Wireless LAN Solution Engine
Downloads: This chapterpdf (PDF - 151.0KB) The complete bookPDF (PDF - 2.68MB) | Feedback

Technical Specifications

Table Of Contents

Technical Specifications


Technical Specifications


Table C-1 provides the Wireless LAN Solution Engine's (WLSE) specifications.

Table C-1 WLSE Technical Specifications 

Component
Specifications

Serial port

One 9-pin connector

RJ-45 ports

Two RJ-45 connectors for connection to integrated 10/100 Ethernet controllers

AC power supply wattage

230 W

AC power supply voltage

100 to 120 VAC / 200 to 240 VAC, 50 / 60 Hz

System battery 

CR2032 3-V lithium coin cell

Height

4.3 cm (1.7 inches)

Width

42.5 cm (16.7 inches)

Depth

55 cm (22 inches)

Weight

10 kg (23 lb) maximum

Operating temperature

10° to 35°C (50° to 95°F)

Storage temperature

-40° to 65°C (-40° to 149°F)

Operating relative humidity

8% to 80% (noncondensing) with a humidity gradation of 10% per hour

Storage relative humidity

5% to 95% (noncondensing)

Operating maximum vibration

0.25 G (half-sine wave) at a sweep of 3 to 200 Hz for 15 minutes

Storage maximum vibration

0.5 G at 3 to 200 Hz for 15 minutes

Operating maximum shock

Six consecutively executed shock pulses in the positive and negative x, y, and z axes (one pulse on each side of the system) of 41 G for up to 2 ms

Storage (non-operational) maximum shock

Six consecutively executed shock pulses in the positive and negative x, y, and z axes (one pulse on each side of the system) of 71 G for 2 ms

Operating altitude

-16 to 2000 m (-50 to 6500 ft)

Storage altitude

-16 to 10,600 m (-50 to 35,000 ft)