Table Of Contents
Release Notes for Cisco Secure Services Client Release 5.1.0.63 for Windows Vista
Contents
Introduction
VPN Integration
System Requirements
Supported OS Environments
Compatibility with Other Supplicants
SSC Differences with Windows Vista
Obtaining SSC Software
SSC Software for the Windows Vista Operating System
SSC License Information
Important Notes
Caveats
Open Caveats
Resolved Caveats
Closed Caveats
Related Documentation
Obtaining Documentation and Submitting a Service Request
Release Notes for Cisco Secure Services Client Release 5.1.0.63 for Windows Vista
October 2010
Contents
This release note contains these sections:
•
Contents
•Introduction
•System Requirements
•Obtaining SSC Software
•Important Notes
•Caveats
•Related Documentation
•Obtaining Documentation and Submitting a Service Request
Introduction
The Cisco Secure Services Client Release 5.1.0.63 (hereafter referred to as SSC 5.1) is client software that operates on the Windows Vista operating system. SSC 5.1 provides 802.1X (Layer 2) and device authentication for access to both wired and wireless networks. SSC manages user and device identity and the network access protocols required for secure access. It works intelligently to make it simple for employees and guests to connect to an enterprise wired or wireless network.
SSC 5.1 supports these main features:
•Wired (802.3) and wireless (802.11) network adapters
•Integrated VPN support
•Authentication using Windows machine credentials
•Single sign-on user authentication using Windows logon credentials
•Simplified and easy to use 802.1X configuration
•EAP methods:
–EAP-FAST, EAP-PEAP, and LEAP
•Inner EAP methods:
–PEAP—EAP-GTC, EAP-MSCHAPv2
–EAP-FAST—EAP-GTC, EAP-MSCHAPv2, and EAP-TLS
•Encryption modes:
–Static WEP (Open or Shared), dynamic WEP (generated with 802.1X), TKIP and AES
•Key establishment protocols:
–WPA, WPA2/802.11i, and CCKM (selectively, depending on the 802.11 NIC adapter)
VPN Integration
SSC integrates an automatic VPN connection feature but requires the Cisco IPSec VPN client (release 5.0.03.0560 or later) to be installed on the user's PC. SSC minimizes user intervention when establishing a VPN connection. SSC supports these IPSec VPN authentication options:
•Secure Computing SofToken II—Specifies a softtoken for authentication.
Note Secure Computing SofToken II is not supported for Windows Vista. When you specify SofToken II authentication in the network configuration and SSC prompts for the username and password, the user must enter the username and the unique one-time password. This requirement is different from Windows 2000 and Windows XP where the user must enter the SoftToken II application password.
•Password—Specifies a simple password authentication.
•Certificate—Specifies certificate authentication and uses the connection to specify the certificate to use. Using this option, SSC does not prompt the end-user for anything.
If the VPN concentrator does not require user authentication, such as when using group authentication, SSC does not prompt the user for information.
When authentication is required by the VPN concentrator, SSC prompts the user for VPN logon information:
•Soft token authentication—Prompts for username and pin for the soft token account.
Note For Windows Vista, Secure Computing SofToken II is not supported. When SofToken II authentication is specified in the network configuration and SSC prompts for the username and password, the username and the unique one-time password must be entered. This is different from Windows 2000 and Windows XP where the SoftToken II application password is entered.
•Password authentication—Prompts for username and password.
•Certificate authentication—No prompt is required.
When the VPN connection is successful, SSC maintains the user entered information for possible future VPN connection attempts while the user is logged on to the PC. If the VPN connection fails, SSC re-prompts the user for VPN logon information.
System Requirements
Supported OS Environments
The supported operating system environments are:
•Windows Vista Business, Enterprise and Ultimate versions—32-bit and 64-bit
–Required Windows Hot Fixes:
KB952613
KB935222 or SP1
KB932063 or SP1
Note Other Windows Vista versions, such as Home Premium and Home Basic are not supported.
Note The latest drivers for the operating system should be loaded on the user's PC prior to installing SSC.
Note Cisco strongly recommends that you install Windows Vista Service Pack 1. However, SP1 is required if wired network connections are to be attempted before user logon.
Compatibility with Other Supplicants
SSC works in conjuction with the Windows Vista Auto Configuration Module (ACM). SSC disables or enables ACM appropriately. SSC is not compatible with other supplicants, such as Juniper Odyssey. If possible, you should completely uninstall other supplicants and reboot the system before continuing with an installation of SSC.
SSC Differences with Windows Vista
•Wired Networks—SSC supports a single wired network per group.
•These EAP methods are not supported:
–EAP-MD5
–EAP-MSCHAPv2
–EAP-GTC
–EAP-TLS
–EAP-TTLS
–PEAP-TLS
•Machine Authentication
–SSC ignores all static machine credentials stored in the configuration; SSC uses the machine's password or certificate instead.
–The [username] identity patterns specified in the configuration is always expanded to host/(fully qualified domain name).
–For EAP-FAST and PEAP, the inner EAP method specified in the configuration might be ignored; the EAP method negotiates the best inner method with the AAA server.
–Configurations that specify a different EAP method for machine authentication from what is specified for user authentication are translated to use the same EAP method specified for user authentication.
•Credential Caching
–The forever credential caching option is not supported. For configurations with the forever credential cashing setting, the credentials are cached until the user logs off.
•Single Sign On—When configured to use single sign on credentials with an inner method of GTC, it is possible that at some point, such as when authentication fails, the user will be prompted for their password.
•Server Validation
–The Personal stores are not used for server validation.
–When the configuration specifies validateChainWithAnyCaFromOs, the certificate must be installed in the Local Computer\Trusted Root store.
–Any Root CA certificate included in the configuration is ignored and the configuration is translated to validateChainWithAnyCaFromOs . The Root CA certification must be installed by some other means.
–The certificate store is limited to Local Computer during machine authentication and user authentications when the connection is attempted before Windows logon.
•EAP-LEAP
–EAP-LEAP does not work with all versions of ACS. Versions which are known to not work include 3.2.3 and 3.3.1.11. Versions which have been tested and work include 3.3.1.16, 3.3.2.2, and 3.3.4.12.
•EAP-FAST
–Supports anonymous TLS renegotiation.
–All PACs contained in the configuration are ignored.
–To use authenticated provisioning, the configuration must specify server validation. When server validation is not used, the authentication fails and the ACS server reports an EAP type not configured error.
–When using TLS, the protected identity pattern is ignored.
–Unless the RADIUS server is configured to allow anonymous TLS renegotiation, when a PAC is received using un-authenticated provisioning, a user must wait for the connection timer to expire before an authentication attempt can be made.
•Smart Card Support—Smart cards are not supported.
•SofToken II—Not supported on Windows Vista. For configurations specifying SofToken II, SSC prompts the user for the username and the unique one-time password (OTP) rather than the username and password for the soft token account.
•Logging—The EAP log entries may appear out of order in the log file, but the time and date stamps are correct.
•Group Policy Object (GPO)—-SSC does not support working with wired and wireless group policy objects; all other types of group policy objects are supported.
•Automatic connection mode—SSC actively scans for the networks defined in the configuration file rather than attempting to sequentially connect to each configured network connect until a connection is established (called walk-the-list). Consequently, it may appear that SSC skips over networks without attempting to connect.
Obtaining SSC Software
SSC Software for the Windows Vista Operating System
SSC 5.1 software is available from the Cisco Software Center:
•SSCMgmtToolKit_5.1.1.zip—Contains the sscManagementUtility and support files.
•Cisco_SSC-Vista_5.1.0.zip —Contains the SSC files. For license information, see the "SSC License Information" section.
•CiscoClientUtilities_5.1.0.zip—Contains the Log Packager.
The SSC software can be obtained from the Cisco Software Center at this URL
http://www.cisco.com/public/sw-center/index.shtml
Click Wireless Software > Client Adapters and Client Software > Cisco Secure Services Client > Windows Vista and follow the prompts to 5.1 under Latest Releases.
Note You must register with Cisco.com or be a registered user to download software.
SSC License Information
The SSC software obtained from the Cisco Software Center on Cisco.com contains two special licenses and their associated limitations:
•90 day trial license for both wired and wireless functions. This license is a full featured SSC license but is limited to an evaluation period of 90 days. After 90 days, to use the full features, you are expected to purchase a permanent license from Cisco (see http://www.cisco.com/en/US/docs/wireless/wlan_adapter/secure_client/product/notes/sscLicense.html).
•Permanent wired-only license. This license allows a limited subset of the full featured 90 day trial SSC license. To obtain full functionality, you are expected to purchase a permanent license from Cisco.
To obtain additional information on the features supported in these special licenses, refer to the Cisco Secure Services Client Version 5.1 Bulletin available on Cisco.com an this URL:
http://www.cisco.com/en/US/products/ps7034/prod_bulletins_list.html
Note When the trial license period has expired and the user attempts to use a non-supported feature, SSC displays a pop-up message that instructs the user to contact their system administrator. If the license has expired, this message can occur each time SSC starts. The message continues until a non-expiring license is obtained.
You can order the SSC 5.1 non-expiring license for Windows Vista using this Cisco product number:
•AIR-SC5.0-VISTA
Important Notes
Novell is not supported by SSC 5.1.
Caveats
Open Caveats
These caveats are open for SSC 5.1:
•CSCsq39157—Enabling SSC 5.1 deletes all profiles stored in Vista's native profile store. The profiles are not restored when you disable or uninstall SSC.
Workaround: None
•CSCsr94030—Static Credentials which are configured in a network profile are ignored when doing machine authentication. SSC uses the appropriate machine's credentials (password or certificate).
Workaround: None.
•CSCsu75164—SSC displays an unsupported option for users who attempt to create 802.1x networks with PEAP and certificates as the authentication mechanism.
Workaround: None.
•CSCsu96058—SSC supports a single wired network and ignores additional wired networks defined in the configuration.
Workaround: None.
•CSCsu96084—SSC does not support the credential caching setting forever. In instances where the network specifies credential caching forever, SSC caches the credentials until the user logs offs or authentication fails.
Workaround: None.
Resolved Caveats
These caveats are resolved for SSC 5.1.
•CSCtj09045—Profile warning message when adding non-configured network
•CSCtj09079—Screenscape certificate password is not top modal
•CSCtj12469—Client shows "searching for adapter" when network cable is unplugged
•CSCsx47443—Honor Default VPN location
•CSCtb89686—Log Packager executing customer files
•CSCtd63194—Vista installer does not enforce msiexec option "REBOOT=ReallySuppress"
•CSCth50415—Error message when switching from wired to wireless
•CSCsy54541—SSC adds extra characters to te VPN banner message
Closed Caveats
These caveats have been closed and will not be resolved:
•CSCsq39164—If SSC is managing any wired or wireless adapters, the user cannot configure EAP settings for Cisco EAP-FAST, LEAP, or PEAP with other cards that are not managed by SSC because the settings are grayed out.
•CSCsr28550—Moving user defined network up and down quickly across connection groups sometimes causes the SSC service to crash and restart.
•CSCsu05644—When using EAP FAST with a CB21AG adapter on Windows Vista, EAP FAST prompts the user with a question and continues to prompt for a response after the user answers yes to: "The PAC that you selected for this profile does not match the server to which the client is connecting. However, a matching PAC has been found in your PAC database. Would you like to use this matching credential authority and save it to the profile?"
•CSCsu95934—LEAP authentication does not succeed against some versions of ACS.
•CSCsu96020—LEAP authentication fails with some versions of Steel-Belted Radius.
•CSCsu95923—EAP-FAST with TLS fails to apply the inner protected identity pattern.
Related Documentation
For more information about SSC 5.1, refer to this document:
•Cisco Secure Services Client Administrator Guide, Release 5.1
The administrator guide contains detailed information on deploying preconfigured end-user SSCs. This document describes the components of the underlying XML schema which controls the content and format of the deployment distribution package (configuration file). It also describes several Administrator utilities that are available to assist in the deployment process.
You can access this document from this Cisco.com link:
http://www.cisco.com/en/US/products/ps7034/prod_maintenance_guides_list.html
Obtaining Documentation and Submitting a Service Request
For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What's New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:
http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html
Subscribe to the What's New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service and Cisco currently supports RSS version 2.0.
This document is to be used in conjunction with the documents listed in the "Related Documentation" section.
Cisco and the Cisco Logo are trademarks of Cisco Systems, Inc. and/or its affiliates in the U.S. and other countries. A listing of Cisco's trademarks can be found at www.cisco.com/go/trademarks. Third party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1005R)
Feedback