Table Of Contents
Release Notes for Cisco Aironet 802.11a/b/g Client Adapters (CB21AG and PI21AG)
Install Wizard 3.6Conflict between Cisco Security Agent Version 5.0 and the Install Wizard for the CB21AG or PI21AG
Mismatch between HP DC5 100 PCI Bus Controller and PCI Key Cache Register on PI21AG Chip
Installing the CB21AG Intermediate Driver Manually
Incompatibility between PACs Created by ACS Version 3.x.xx and ACS Version 4.0.xx
Conflict with Third-Party Supplicants
Customized Installation Images (Notice to IT Professionals)
Client Adapter Software Compatibility
Enabling CCKM Fast Secure Roaming
Access Point Setting for LEAP or EAP-FAST Authentication
EAP-FAST Fails When Access Point Configured as Local RADIUS Server
Reboot Required When Uninstalling ACU and ADU
Uninstalling Software Components
Auto Profile Selection Enables Scan of Wireless Modes in Auto-Selected Profiles
Windows Wireless Network Connection Icon Shows Unavailable Connection (Windows XP Only)
Installing or Upgrading Client Adapter Software
Installing the Client Adapter Software
Upgrading the Client Adapter Software
Installing a Microsoft Hot Fix for Group Policy Delay
Finding the Version of ADU and Other Software Components
Getting Bug Information on Cisco.com
Obtaining Documentation, Obtaining Support, and Security Guidelines
Release Notes for Cisco Aironet 802.11a/b/g Client Adapters (CB21AG and PI21AG)
Install Wizard 3.6
Contents
This document contains the following sections:
•Installing or Upgrading Client Adapter Software
•Installing a Microsoft Hot Fix for Group Policy Delay
•Obtaining Documentation, Obtaining Support, and Security Guidelines
Introduction
This document describes system requirements, important notes, new and changed information, installation and upgrade procedures, and caveats for CB21AG and PI21AG client adapter Install Wizard release 3.6 and the following software included in the Install Wizard file:
•CB21AG and PI21AG client adapter driver release 3.6
•Aironet Desktop Utility (ADU) release 3.6
•Cisco Aironet Site Survey Utility release 1.4.01
System Requirements
You need the following items in order to install Install Wizard 3.6 and use its software components:
•One of the following Cisco Aironet client adapters:
–CB21AG PC-Cardbus card
–PI21AG PCI card
•A computer running the Windows 2000 or XP operating system
Note Cisco recommends a 300-MHz (or greater) processor.
•Service Pack 2 for Windows XP (Professional, Home); Service Pack 4 for Windows 2000
•20 MB of free hard disk space (minimum)
•128 MB of RAM or greater (recommended)
•If your wireless network uses EAP-TLS or PEAP authentication, Certificate Authority (CA) and user certificates for EAP-TLS authentication or CA certificate for PEAP authentication
•If your wireless network uses PEAP (EAP-GTC) authentication with a One-Time Password (OTP) user database:
–A hardware token device from OTP vendors or the Secure Computing SofToken program (version 2.1 or later)
–Your hardware or software token password
•The Microsoft 802.1X supplicant, if your client adapter is installed on a Windows 2000 device and uses PEAP (EAP-MSCHAPV2) with machine authentication
•All necessary infrastructure devices (such as access points, servers, gateways, user databases, etc.) must be properly configured for any authentication type you plan to enable on the client.
•The following information from your system administrator:
–The logical name for your workstation (also referred to as client name)
–The protocols necessary to bind to the client adapter, such as TCP/IP
–The case-sensitive service set identifier (SSID) for your RF network
–If your network setup does not include a DHCP server, the IP address, subnet mask, and default gateway address of your computer
–The wired equivalent privacy (WEP) keys of the access points with which your client adapter will communicate, if your wireless network uses static WEP for security
–The username and password for your network account
–Protected access credentials (PAC) file if your wireless network uses EAP-FAST authentication with manual PAC provisioning
Important Notes
Conflict between Cisco Security Agent Version 5.0 and the Install Wizard for the CB21AG or PI21AG
If you have Cisco Security Agent (CSA) version 5.0 installed on your computer and you attempt to run release 3.6 of the Install Wizard (setup.exe) for the Cisco Aironet CB21AG or PI21AG wireless client, you might encounter one of two conditions that prevents the completion of software installation.
When you run setup.exe, the CSA opens the following dialog box (see Figure 1).
Figure 1 Cisco Security Agent Dialog Box
The following are the two conditions:
•If you click No, you are instructing the CSA to disallow devcon.exe of the client installation software from executing its tasks. The installation then appears to stall. The installation does not complete, and the computer must be rebooted. To avoid this behavior, disable the CSA before installing the wireless client software.
•If you click Yes, you are instructing the CSA to allow devcon.exe of the client installation software to execute its tasks. However, the CSA might block cmd.exe from executing without notice. The installation then appears to stall, and the computer must be rebooted.
Mismatch between HP DC5 100 PCI Bus Controller and PCI Key Cache Register on PI21AG Chip
A mismatch exists between the HP DC5100 PCI bus controller and the PCI key cache register on the chip of the PI21AG. The key cache uses a 48-bit register in which the PI21AG sends out two writes on the PCI bus back to back (DWORD and WORD). The controller on the device cannot handle two consecutive write cycles on the bus, which causes a fatal error on the PCI bus.
You should slow down the write operations to the key cache by performing a register read before and after a register write. To slow down the write operations, install registry key "singleWriteKC=1." The path of the "singleWriteKC=1" registry key is the following:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E972-E325-11CE-BFC1-08002bE10318}
You should not see any system degradation or performance hits, as the key cache is only changed every few minutes. An additional read before the second write cycle only lasts a few micro seconds in the PCI space.
Installing the CB21AG Intermediate Driver Manually
In some instances, the installation of the CB21AG software might not work as expected because the intermediate driver might not have installed correctly. In this situation, the installer might not detect this condition, and the rest of the software will not function correctly.
The CB21AG intermediate driver must be installed manually. To install the intermediate driver manually, follow these steps:
Step 1 Insert the client adapter.
Step 2 Click Network Connections in the Start > Settings menu in Windows XP, or right-click My Network Places in Windows 2000. Find the CB21AG instance.
Step 3 Right-click the Cisco CB21AG instance, and left click Properties.
Step 4 Choose the Install option and then add a new service.
Step 5 Click Have disk. Go to the \windows\system32 directory and choose wsimd.inf.
Step 6 Select Wireless Intermediate Driver and click OK. The wireless IMD is bound to the adapter.
Step 7 Reboot system.
Incompatibility between PACs Created by ACS Version 3.x.xx and ACS Version 4.0.xx
PACs that are created by ACS version 3.x.xx are not compatible with ACS version 4.0.xx. Client stations must import new PACs. If you select auto-provisioning, new PACs will automatically be generated and used. However, if you select manual provisioning, you must manually export new PACs to the client stations.
If a user wants to authenticate to ACS version 4.0.xx and version 3.x.xx at different times, both PACs must remain on the client station. The ADU is capable of automatically selecting the appropriate PAC.
However, if you experiences authentication failures after upgrading the software, delete all the PACs provisioned from the 3.x.xx server.
Conflict with Third-Party Supplicants
When using release 3.6, you might encounter a conflict with third-party supplicants (such as the Juniper Odyssey) that causes the Cisco client adapter to lose connection. If you encounter such a conflict, disable third-party supplicants.
Customized Installation Images (Notice to IT Professionals)
Caution Use caution when bundling the client adapter software into a customized installation image. If the registry settings are modified, the software may not install and uninstall properly.
Client Adapter Software Compatibility
Caution Cisco Aironet CB21AG and PI21AG client adapter software is incompatible with other Cisco Aironet client adapter software. The Aironet Desktop Utility (ADU) must be used with CB21AG and PI21AG cards, and the Aironet Client Utility (ACU) must be used with all other Cisco Aironet client adapters.
Installing the Novell Client
If you are going to use the Novell Client, be sure to install it on your computer prior to installing the client adapter software.
Enabling CCKM Fast Secure Roaming
If you want to enable CCKM on the client adapter, you must choose the WPA/WPA2/CCKM security option, regardless of whether you want the adapter to use WPA or WPA2. The configuration of the access point to which your client adapter associates determines whether CCKM will be used with 802.1x, WPA, or WPA2.
Access Point Setting for LEAP or EAP-FAST Authentication
Access points must be set for both Network-EAP and open authentication in order to associate to CB21AG and PI21AG client adapters running LEAP with WPA/WPA2/CCKM or EAP-FAST.
EAP-FAST Fails When Access Point Configured as Local RADIUS Server
The client adapter fails to authenticate using EAP-FAST when the access point is running Cisco IOS Release 12.3(2)JA2 and is configured as a local RADIUS server. The following message appears: "Unable to EAP-FAST authenticate the wireless user in the specified amount of time. Network infrastructure might be down."
GINA Error on Bootup
If your computer ever experiences a GINA error on bootup, boot to the safe mode command prompt. Then copy the msgina.dll file in the WinNT\System32 directory (Windows 2000) or Windows\System32 directory (Windows XP) over to a file named cscogina.dll. The copy command enables you to copy a source file (msgina.dll) to a destination file (cscogina.dll) within the same directory.
Reboot Required When Uninstalling ACU and ADU
Caution When you uninstall ACU and ADU, be sure to reboot your computer when prompted. Otherwise, the system may be rendered unable to boot, displaying the message "The Logon User Interface DLL cswGina.dll failed to load. Contact your system administrator to replace the DLL or restore the original DLL."
Uninstalling Software Components
All profiles and stored PAC files are deleted if you use the Uninstall the previous installation option on the Previous Installation Detected Install Wizard window to uninstall the client adapter software. Cisco recommends that you use the Profile Manager's export feature to save your profiles before uninstalling the software.
Profiles for PC-Cardbus Cards
The profiles for PC-Cardbus cards are tied to the slot in which the card is inserted. Therefore, you must always insert your PC-Cardbus card into the same slot, create profiles for both slots, or export the profiles for one slot and import them for the other slot.
Auto Profile Selection Enables Scan of Wireless Modes in Auto-Selected Profiles
When you enable auto profile selection, the client adapter ignores the selected profile's wireless mode setting and scans the wireless modes specified by all the profiles in the auto profile selection list for an available network. With this method, the client does not need to disassociate or to change the current profile while looking for networks in other profiles.
ASTU Exit Option
The Exit option on the Aironet System Tray Utility (ASTU) pop-up menu closes both ASTU and ADU.
Windows Wireless Network Connection Icon Shows Unavailable Connection (Windows XP Only)
If your computer is running Windows XP and you configured your client adapter using ADU, the Windows Wireless Network Connection icon in the Windows system tray may be marked with a red X and show an unavailable connection even though a wireless connection exists. This condition is caused by a conflict between ADU and Windows XP wireless network settings. Simply ignore the Windows icon and use the ASTU icon to check the status of your client adapter's wireless connection.
Supporting Documentation
The Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide (OL-4211-06) pertains specifically to CB21AG and PI21AG client adapters. If you are using a Cisco Aironet 340, 350, or CB20A client adapter, refer to the installation and configuration guide for that client adapter and your computer's operating system.
New and Changed Information
Management Frame Protection
Release 3.6 supports Management Frame Protection (MFP) when available and enabled on the wireless infrastructure. The CB21AG and PI21AG have MFP automatically enabled.
Installing or Upgrading Client Adapter Software
This section describes how to initially install or upgrade to CB21AG and PI21AG Install Wizard 3.6 on a computer running Windows 2000 or XP. If the client adapter software is not installed on your computer, follow the instructions in the "Installing or Upgrading Client Adapter Software" section below. If you are upgrading your client adapter software to release 3.6, follow the instructions in the "Upgrading the Client Adapter Software" section.
Installing the Client Adapter Software
This section describes how to install Cisco Aironet CB21AG or PI21AG client adapter driver and utilities from a single executable file named WinClient-802.11a-b-g-Ins-Wizard-vx.exe, where x represents the release number. Follow these steps to install these client adapter software components on a computer running Windows 2000 or XP.
Caution Cisco Aironet CB21AG and PI21AG client adapter software is incompatible with other Cisco Aironet client adapter software. The Aironet Desktop Utility (ADU) must be used with CB21AG and PI21AG cards, and the Aironet Client Utility (ACU) must be used with all other Cisco Aironet client adapters.
Caution Do not eject your client adapter at any time during the installation process, including during the reboot.
Note This procedure is meant to be used the first time the Cisco Aironet CB21AG or PI21AG client adapter software is installed on your computer. If this software is already installed on your computer, follow the instructions in Chapter 9 to upgrade the client adapter software.
Note Only one CB21AG or PI21AG client adapter can be installed and used at a time. The software does not support the use of multiple CB21AG or PI21AG cards.
Step 1 Make sure the client adapter is inserted into your computer.
Step 2 Make sure that you have a Cisco Connection Online (CCO) username and password.
Step 3 If you do not have a CCO username and password, go to Cisco's main page (http://www.cisco.com) and click Register (top). Then, follow the instructions to create a CCO username and password.
Step 4 Browse to the following location:
http://www.cisco.com/public/sw-center/
Step 5 Click Wireless Software.
Step 6 Click Wireless LAN Access.
Step 7 Click Cisco Wireless LAN Client Adapters.
Step 8 Click Cisco Aironet Wireless LAN Client Adapters.
Step 9 Perform one of the following steps:
•If you are using a PC-Cardbus card, click Cisco Aironet 802.11a/b/g CardBus Wireless LAN Client Adapter (CB21AG).
•If you are using a PCI card, click Cisco Aironet 802.11a/b/g PCI Wireless LAN Client Adapter (PI21AG).
Step 10 When prompted, enter your CCO username and password, and click OK.
Step 11 Click Aironet Client Installation Wizard (Firmware, Driver, Utility).
Step 12 Click Windows 2000 or Windows XP.
Step 13 Click the link with the latest release number.
Step 14 Click the Install Wizard file (WinClient-802.11a-b-g-Ins-Wizard-vxx.exe, where xx is the version number).
Step 15 If prompted, enter your CCO username and password, and click OK.
Step 16 Complete the encryption authorization form, read and accept the terms and conditions of the Software License Agreement, select the file again to download it, and save the file on your computer's Desktop.
Step 17 Use Windows Explorer to find the installer.
Step 18 Double-click the installer. The "Starting InstallShield Wizard" message appears followed by the Preparing Setup window (see Figure 2) and the Cisco Aironet Installation Program window (see Figure 3).
Figure 2 Preparing Setup Window
Figure 3 Cisco Aironet Installation Program Window
Step 19 Click Next. The Setup Type window appears (see Figure 4).
Figure 4 Setup Type Window
Step 20 Choose one of the following options and click Next:
Note To ensure compatibility among software components, Cisco recommends that you install the client utilities and driver.
•Install Client Utilities and Driver—Installs the client adapter driver and client utilities.
•Install Driver Only—Installs only the client adapter driver. If you choose this option, click Next and go to Step 32.
•Make Driver Installation Diskette(s)—Enables you to create driver installation diskettes that can be used to install drivers using the Windows Device Manager.
Note If you choose one of the first two options and a client adapter is not inserted into your computer, the following message appears: "The device may not be present or could have been ejected/unplugged from the system. Insert or reinsert it now." Insert the client adapter and click OK. If you proceed without the client adapter inserted, the installation continues, but the driver installation is incomplete. You must manually install the driver later using the Update Device Driver Wizard. See Chapter 9 of the Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide for instructions.
Step 21 When the Install Cisco Aironet Site Survey Utility window appears (see Figure 5), check the Install Cisco Aironet Site Survey Utility check box if you want to install a utility that helps you to determine the best placement of infrastructure devices within your wireless network. Click Next.
Figure 5 Install Cisco Aironet Site Survey Utility Window
Note See Appendix F of the Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide for instructions on using the utility.
Step 22 If a message appears indicating that you are required to restart your computer at the end of the installation process, click Yes.
Note If you click No, you are asked to confirm your decision. If you proceed, the installation process terminates.
The Choose Destination Location window appears (see Figure 6).
Figure 6 Choose Destination Location Window
Step 23 Perform one of the following:
•If you chose the first option in Step 20, click Next to install the client utility files in the C:\Program Files\Cisco Aironet directory.
Note If you want to install the client utilities in a different directory, click Browse, choose a different directory, click OK, and click Next.
•If you chose the Make Driver Installation Diskette(s) option in Step 20, insert a floppy disk into your computer and click Next to copy the driver to the diskette. Go to Step 32.
Note If you want to copy the driver to a different drive or directory, click Browse, choose a new location, click OK, and click Next.
Step 24 The Select Program Folder window appears (see Figure 7).
Figure 7 Select Program Folder Window
Step 25 Click Next to add program icons to the Cisco Aironet program folder.
Note If you want to specify a different program folder, choose a folder from the Existing Folders list or type a new folder name in the Program Folder field and click Next.
Step 26 If your computer is running Windows 2000, go to Step 32. If your computer is running Windows XP, the window titled IMPORTANT: Please Read! appears (see Figure 8).
Figure 8 IMPORTANT: Please Read! Window
Step 27 Read the information displayed and click Next. The Choose Configuration Tool window appears (see Figure 9).
Figure 9 Choose Configuration Tool Window
Step 28 Choose one of the following options:
•Cisco Aironet Desktop Utility (ADU)—Enables you to configure your client adapter using ADU.
•Third-Party Tool—Enables you to configure your client adapter using a third-party tool such as the Microsoft Wireless Configuration Manager in Windows XP.
Table 1 compares Windows XP and ADU client adapter features.
Note If you choose Cisco Aironet Desktop Utility (ADU) above, the Microsoft Wireless Configuration Manager is disabled. If you ever manually enable it, you are prompted to disable it whenever ADU is activated.
Step 29 Click Next.
Step 30 If you chose Cisco Aironet Desktop Utility (ADU) in Step 28, go to Step 32. If you chose Third-Party Tool, the Enable Tray Icon window appears (see Figure 10).
Figure 10 Enable Tray Icon Window
Step 31 Check the Enable Cisco Aironet System Tray Utility (ASTU) check box if you want to be able to use ASTU even though you have chosen to configure your client adapter through a third-party tool instead of ADU. Click Next.
Step 32 When prompted to insert your client adapter, click OK. The Setup Status window appears (see Figure 11).
Figure 11 Setup Status Window
The installation process begins, and you are notified as each software component is installed.
Step 33 When a message appears indicating that your computer needs to be rebooted, click OK and allow your computer to restart.
Step 34 If the Windows Found New Hardware Wizard appears after your computer reboots, click Next, allow the wizard to install the software for the client adapter, and click Finish.
Step 35 If your network setup does not include a DHCP server and you plan to use TCP/IP, follow these steps for your operating system.
•Windows 2000
a. Double-click My Computer, Control Panel, and Network and Dial-up Connections.
b. Right-click Local Area Connection x (where x represents the number of the connection).
c. Click Properties.
d. In the Components Checked Are Used by This Connection field, click Internet Protocol (TCP/IP) and Properties.
e. Choose Use the following IP address and enter the IP address, subnet mask, and default gateway address of your computer (which can be obtained from your system administrator).
f. Click OK to close each open window.
•Windows XP
a. Double-click My Computer, Control Panel, and Network Connections.
b. Right-click Wireless Network Connection x (where x represents the number of the connection).
c. Click Properties.
d. In the This Connection Uses the Following Items field, click Internet Protocol (TCP/IP) and Properties.
e. Choose Use the following IP address and enter the IP address, subnet mask, and default gateway address of your computer (which can be obtained from your system administrator).
f. Click OK to close each open window.
Step 36 If you are prompted to restart your computer, click Yes.
Step 37 Now that your client adapter is properly installed, it is ready to be configured.
•If you are planning to configure your client adapter through ADU, go to Chapter 4 of the Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide for more information.
•If you are planning to configure your client adapter through the Windows XP Wireless Configuration Manager, go to Appendix E of the Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide for more information.
•If you are planning to configure your client adapter through another third-party tool, refer to the documentation for that application.
Note If you want to be able to use ADU's Group Policy Delay parameter, follow the instructions in the next section to download and install a necessary hot fix before configuring your client adapter.
Note If you experienced problems during or after installation, refer to Chapter 10 of the Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide for more information for troubleshooting information.
Upgrading the Client Adapter Software
Follow these steps to upgrade your CB21AG or PI21AG client adapter software to release 3.6 using the settings that were selected during the last installation.
Note If you want to upgrade your client adapter software using new installation settings, you must uninstall the previous installation [see the instructions in Chapter 9 of the Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide] and then follow the instructions in the "Installing the Client Adapter Software" section to install the new software.
Step 1 Make sure the client adapter is inserted into your computer.
Step 2 Make sure that you have a Cisco Connection Online (CCO) username and password.
Step 3 If you do not have a CCO username and password, go to Cisco's main page (http://www.cisco.com) and click Register (top). Then, follow the instructions to create a CCO username and password.
Step 4 Browse to the following location:
http://www.cisco.com/public/sw-center/
Step 5 Click Wireless Software.
Step 6 Click Wireless LAN Access.
Step 7 Click Cisco Wireless LAN Client Adapters.
Step 8 Click Cisco Aironet Wireless LAN Client Adapters.
Step 9 Perform one of the following steps:
•If you are using a PC-Cardbus card, click Cisco Aironet 802.11a/b/g CardBus Wireless LAN Client Adapter (CB21AG).
•If you are using a PCI card, click Cisco Aironet 802.11a/b/g PCI Wireless LAN Client Adapter (PI21AG).
Step 10 When prompted, enter your CCO username and password, and click OK.
Step 11 Click Aironet Client Installation Wizard (Firmware, Driver, Utility).
Step 12 Click Windows 2000 or Windows XP.
Step 13 Click the link with the greatest release number.
Step 14 Click the Install Wizard file (WinClient-802.11a-b-g-Ins-Wizard-vxx.exe, where xx is the version number).
Step 15 If prompted, enter your CCO username and password, and click OK.
Step 16 Complete the encryption authorization form, read and accept the terms and conditions of the Software License Agreement, select the file again to download it, and save the file on your computer's Desktop.
Step 17 Use Windows Explorer to find the installer.
Step 18 Double-click the installer. The "Starting InstallShield Wizard" message appears followed by the Preparing Setup window (see Figure 12) and the Cisco Aironet Installation Program window (see Figure 13).
Figure 12 Preparing Setup Window
Figure 13 Previous Installation Detected Window
Step 19 Choose Update the previous installation and click Next.
Step 20 When a message appears indicating that you are required to restart your computer at the end of the installation process, click Yes.
Note If you click No, you are asked to confirm your decision. If you proceed, the installation process terminates.
The Setup Status window appears (see Figure 14).
Figure 14 Setup Status Window
The upgrade process begins, and you are notified as each software component is installed.
Step 21 When a message appears indicating that your computer needs to be rebooted, click OK and allow your computer to restart. The client adapter's software has been upgraded.
Installing a Microsoft Hot Fix for Group Policy Delay
If you want to use the Group Policy Delay parameter on the Profile Management (Security) window in ADU, you must install a Microsoft hot fix on computers running Windows 2000. The hot fix is incorporated into Windows XP Service Pack 2 and later.
The Group Policy Delay parameter enables you to specify how much time elapses before the Windows logon process starts Group Policy, a Windows feature used by administrators to specify configuration options for groups of users. The objective is to delay the start of Group Policy until wireless network authentication occurs. Follow the steps below to obtain and install the hot fix.
Note You must be a registered Cisco customer and log into Cisco.com in order to download the hot fix. If you are unable to access the hot fix from Cisco.com, contact Microsoft Support to obtain it. The Windows 2000 support page provides the contact information:
http://support.microsoft.com/default.aspx?scid=fh;EN-US;win2000
Step 1 Use your computer's web browser to access the following URL:
http://www.cisco.com/cgi-bin/tablebuild.pl/aironet_hotfix
Step 2 If prompted, enter your Cisco Connection Online (CCO) username and password, and click OK.
Note To create a CCO username and password, visit http://www.cisco.com.
Step 3 Click the hot fix file (userenv.zip).
Step 4 Complete the encryption authorization form and click Submit.
Step 5 Click the file again to download it.
Step 6 Save the file to your computer's hard drive.
Step 7 Find the file using Windows Explorer, double-click it, and extract its files to a folder.
Step 8 Reboot your computer and press F8 while your computer is booting.
Step 9 When the boot menu appears, select Safe Mode with Command Prompt.
Note You must complete this procedure in safe mode; otherwise, system file protection (SFP) will silently restore the original version of the file you are replacing.
Step 10 Copy the hot fix file (userenv.dll) to %systemroot%\System32 and overwrite the existing version of this file.
Step 11 Delete the copy of userenv.dll in %systemroot%\System32\DllCache.
Step 12 Restart your computer.
Finding Version Numbers
Follow the instructions in this section to find the version numbers of your client adapter's software components.
Finding the Driver Version
To find the driver version that is currently installed for your client adapter, open ADU, click the Diagnostics tab, and click Adapter Information. The Driver Version field on the Adapter Information window shows the current driver version.
Finding the Version of ADU and Other Software Components
To find the version of ADU and other software components installed for your client adapter, open ADU and choose the About Aironet Desktop Utility option from the Help drop-down menu. The About window shows the current version of the following software components: ADU, ACAU, the authentication supplicant, the protocol driver, and the Windows NDIS miniport driver.
Caveats
This section describes the open and resolved caveats for the software components in this release.
Open Caveats
The following caveats are not resolved in release 3.6:
•CSCsf96751—CB21AG client does not function properly with PC network bridge feature
Network bridging on a PC with the CB21AG client and a wired NIC initially allows traffic to pass from end to end. However, if the PC is rebooted, the network bridge does not start because the CB21AG does not associate to the access point.
Workaround: Disable the network bridge, reassociate the CB21AG with the access point, and create the network bridge again. Do not reboot the PC.
•CSCsg65164—Authentication timeout for EAP-FAST occurs after 60 seconds
The ADU sends an EAPOL-start message after 30 seconds. However, the login window does not appear. The ADU sends a second EAPOL-start message after 30 seconds. After this second message, the login window appears. It takes 60 seconds for the login window to appear, even when the Authentication Timeout Value is set to 30 seconds.
•CSCsg99350—CB21AG client does not follow data-rate setting on WLC
The CB21AG client does not follow the data-rate setting on the WLC. The client uses the 1-Mbps and 2-Mbps data rate for 802.11 data packets even though these rates were disabled on the WLC. This caveat was changed to an enhancement request.
•CSCsh56333—Transmit power of transmitted packets might be not the intended power
After a change in channel, the transmit power of transmitted packets might be lower or higher than the intended transmit power.
•CSCsi11587—CCKM caching and roaming are not working with WLC
When the client first authenticates to AP1 and then to AP2 in roaming, there is packet loss when pinging. User credentials are not cached.
•CSCsi14938—PEAP (EAP-GTC, EAP MSCHAPv2) Single Sign-On fails
PEAP machine authentication is enabled on the ACS server, and the client gets a machine certificate via a Group Policy Object. The client uses a profile that is configured to use PEAP (EAP-GTC) or PEAP (MSCHAPv2) with Single Sign-On. The "Use Machine Information for Domain Logon" option is checked, and "Use Windows User name and Password" is checked for the profile. The "Cached logons"value is set from 10 to 0 in the client windows regedit.
After the system is reboot, the ADU cannot log on to the Windows domain. The failed machine information logon record cannot be found in the ACS server log.
•CSCsi48025—ADU dims when disabling QoS in interface
An ADU associated to an access point is configured with open WEP 128-bit encryption. The CB21AG is selected as the local area connection. In the local area connection Properties window, QoS Packet Scheduler is disabled. In the Windows Task Manager, the ADU is dimmed.
•CSCsi49993—AP scan log timer at 0 seconds freezes CASSU and CPU usage reaches 100 percent
When the access point scan list logging timer is set to 0 seconds in the CASSU AP Scan List Logging Configuration window, the CASSU stops responding and CPU usage reaches 100 percent.
•CSCsi60811—PMKID caching is not working with CB21AG card
With a 4400 controller, a WLAN is configured with WPA2 and with 802.1X selected as the key management method. A client sends a PMKID in the association request, but the PMKID does not match the controller PMKID cache.
•CSCsi63193—Installation of ADU with PI21AG stalls on Acer desktop
The installation of the ADU with PI21AG stalls on the Acer 6900 Veriton desktop with Windows XP SP2.
Resolved Caveats
The following caveats have been resolved in release 3.6:
•CSCsg30531—ADU does not recognize EAP-TLS certificate
Although the client is in the Windows domain and has the correct certificate for EAP-TLS, the user sees the following message:
No machine certificates were found on this computer. Please select a different EAP option.
•CSCsg99156—PI21AG does not respond to identity requests if 802.11a is used
The wireless client might lose connectivity during roaming. When this condition occurs, the ADU prompts for a username and password. This condition occurs only when the user connects in the 802.11a band and when the user uses the supplicant that is bundled with the ADU.
•CSCsh05264—CASSU does not install if the systemdrive\temp folder is not created
The Cisco Aironet Site Survey Utility (CASSU) does not install under Program Files > Cisco Aironet because the systemdrive\temp\ folder was not created with the initial installation from Setup.exe. Lenovo T60 laptops with Windows XP Pro, SP2, experienced this condition. However, Lenovo T60 with Windows 2000, SP4; Acer TM2350 with Windows XP Pro, SP2; and Lenovo R51 with Windows XP Pro, SP2, did not experience this condition.
•CSCsi55815—ADU does not implement EAP-FAST inner and outer sequence correctly.
The ADU client attempts to use the same EAP ID sequence for both outside and inside EAP traffic. This condition occurs between the ADU and the Funk/Juniper Steel Belted RADIUS server.
Getting Bug Information on Cisco.com
If you are a Cisco registered user, you can use the Cisco TAC Software Bug Toolkit, which consists of three tools (Bug Navigator, Bug Watcher, and Search by Bug ID Number) that help you to identify existing bugs (or caveats) in Cisco software products.
Access the TAC Software Bug Toolkit at the following URL:
http://www.cisco.com/pcgi-bin/Support/Bugtool/launch_bugtool.pl
Troubleshooting
For the most up-to-date, detailed troubleshooting information, refer to the Cisco TAC website at
http://www.cisco.com/en/US/support/index.html
Click Product Support > Wireless. Then choose your product and Troubleshooting to find information on the problem you are experiencing.
Related Documentation
For more information about ACAU and the Cisco Aironet CB21AG and PI21AG client adapters, refer to the following documents:
•Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Administration Utility Administrator Guide (OL-7086-04)—Provides instructions for installing the ACAU and using it to set software installation options and create configuration profiles for CB21AG and PI21AG client adapters.
http://www.cisco.com/en/US/products/hw/wireless/ps4555/prod_maintenance_guides_list.html
•Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide (OL-4211-06)—Provides instructions for installing, configuring, and troubleshooting CB21AG and PI21AG client adapters on computers running the Microsoft Windows 2000 or XP operating system.
•Release Notes for Cisco Aironet 802.11a/b/g (CB21AG and PI21AG) Client Administration Utility (ACAU) 3.6 (OL-13102-01)—Describes new features and open and resolved caveats in ACAU 3.6.
http://www.cisco.com/en/US/products/hw/wireless/ps4555/prod_release_notes_list.html
Obtaining Documentation, Obtaining Support, and Security Guidelines
For information on obtaining documentation, obtaining support, providing documentation feedback, security guidelines, and also recommended aliases and general Cisco documents, see the monthly What's New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:
http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html
This document is to be used in conjunction with the documents listed in the "Related Documentation" section.
CCVP, the Cisco Logo, and the Cisco Square Bridge logo are trademarks of Cisco Systems, Inc.; Changing the Way We Work, Live, Play, and Learn is a service mark of Cisco Systems, Inc.; and Access Registrar, Aironet, BPX, Catalyst, CCDA, CCDP, CCIE, CCIP, CCNA, CCNP, CCSP, Cisco, the Cisco Certified Internetwork Expert logo, Cisco IOS, Cisco Press, Cisco Systems, Cisco Systems Capital, the Cisco Systems logo, Cisco Unity, Enterprise/Solver, EtherChannel, EtherFast, EtherSwitch, Fast Step, Follow Me Browsing, FormShare, GigaDrive, HomeLink, Internet Quotient, IOS, iPhone, IP/TV, iQ Expertise, the iQ logo, iQ Net Readiness Scorecard, iQuick Study, LightStream, Linksys, MeetingPlace, MGX, Networking Academy, Network Registrar, Packet, PIX, ProConnect, RateMUX, ScriptShare, SlideCast, SMARTnet, StackWise, The Fastest Way to Increase Your Internet Quotient, and TransPath are registered trademarks of Cisco Systems, Inc. and/or its affiliates in the United States and certain other countries.
All other trademarks mentioned in this document or Website are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (0704R)
Copyright © 2007 Cisco Systems, Inc.
All rights reserved.