Table Of Contents
Release Notes for Cisco Aironet 802.11a/b/g Client Adapters (CB21AG and PI21AG)
Install Wizard 2.6Customized Installation Images (Notice to IT Professionals)
Client Adapter Software Compatibility
Enabling CCKM Fast Secure Roaming
Access Point Setting for LEAP or EAP-FAST Authentication
EAP-FAST Fails When Access Point Configured as Local RADIUS Server
Reboot Required When Uninstalling ACU and ADU
Uninstalling Software Components
Auto Profile Selection Enables Scan of Wireless Modes in Auto-Selected Profiles
Windows Wireless Network Connection Icon Shows Unavailable Connection (Windows XP Only)
Installing or Upgrading Client Adapter Software
Installing the Client Adapter Software
Upgrading the Client Adapter Software
Installing a Microsoft Hot Fix for Group Policy Delay
Finding the Version of ADU and Other Software Components
Getting Bug Information on Cisco.com
Cisco Product Security Overview
Reporting Security Problems in Cisco Products
Obtaining Technical Assistance
Cisco Technical Support & Documentation Website
Definitions of Service Request Severity
Obtaining Additional Publications and Information
Release Notes for Cisco Aironet 802.11a/b/g Client Adapters (CB21AG and PI21AG)
Install Wizard 2.6
Contents
This document contains the following sections:
•Installing or Upgrading Client Adapter Software
•Installing a Microsoft Hot Fix for Group Policy Delay
•Cisco Product Security Overview
•Obtaining Technical Assistance
•Obtaining Additional Publications and Information
Introduction
This document describes system requirements, important notes, installation and upgrade procedures, and caveats for CB21AG and PI21AG client adapter Install Wizard release 2.6 and the following software included in the Install Wizard file:
•CB21AG and PI21AG client adapter driver release 2.5
•Aironet Desktop Utility (ADU) release 2.6
System Requirements
You need the following items in order to install Install Wizard 2.6 and use its software components:
•One of the following Cisco Aironet client adapters:
–CB21AG PC-Cardbus card
–PI21AG PCI card
•A computer running the Windows 2000 or XP operating system
Note Cisco recommends a 300-MHz (or greater) processor.
Note Windows XP support does not include Windows XP Embedded.
•Service Pack 2 for Windows XP
•20 MB of free hard disk space (minimum)
•128 MB of RAM or greater (recommended)
•If your wireless network uses EAP-TLS or PEAP authentication, Certificate Authority (CA) and user certificates for EAP-TLS authentication or CA certificate for PEAP authentication
•If your wireless network uses PEAP (EAP-GTC) authentication with a One-Time Password (OTP) user database:
–A hardware token device from OTP vendors or the Secure Computing SofToken program (version 2.1 or later)
–Your hardware or software token password
•The Microsoft 802.1X supplicant, if your client adapter is installed on a Windows 2000 device and uses PEAP (EAP-MSCHAPV2) with machine authentication
•All necessary infrastructure devices (such as access points, servers, gateways, user databases, etc.) must be properly configured for any authentication type you plan to enable on the client.
•The following information from your system administrator:
–The logical name for your workstation (also referred to as client name)
–The protocols necessary to bind to the client adapter, such as TCP/IP
–The case-sensitive service set identifier (SSID) for your RF network
–If your network setup does not include a DHCP server, the IP address, subnet mask, and default gateway address of your computer
–The wired equivalent privacy (WEP) keys of the access points with which your client adapter will communicate, if your wireless network uses static WEP for security
–The username and password for your network account
–Protected access credentials (PAC) file if your wireless network uses EAP-FAST authentication with manual PAC provisioning
Important Notes
Customized Installation Images (Notice to IT Professionals)
Caution Use caution when bundling the client adapter software into a customized installation image. If the registry settings are modified, the software may not install and uninstall properly.
Client Adapter Software Compatibility
Caution Cisco Aironet CB21AG and PI21AG client adapter software is incompatible with other Cisco Aironet client adapter software. The Aironet Desktop Utility (ADU) must be used with CB21AG and PI21AG cards, and the Aironet Client Utility (ACU) must be used with all other Cisco Aironet client adapters.
Installing the Novell Client
If you are going to use the Novell Client, be sure to install it on your computer prior to installing the client adapter software.
Enabling CCKM Fast Secure Roaming
If you want to enable CCKM on the client adapter, you must choose the WPA/WPA2/CCKM security option, regardless of whether you want the adapter to use WPA or WPA2. The configuration of the access point to which your client adapter associates determines whether CCKM will be used with 802.1x, WPA, or WPA2.
Access Point Setting for LEAP or EAP-FAST Authentication
Access points must be set for both Network-EAP and open authentication in order to associate to CB21AG and PI21AG client adapters running LEAP with WPA/WPA2/CCKM or EAP-FAST.
EAP-FAST Fails When Access Point Configured as Local RADIUS Server
The client adapter fails to authenticate using EAP-FAST when the access point is running Cisco IOS Release 12.3(2)JA2 and is configured as a local RADIUS server. The following message appears: "Unable to EAP-FAST authenticate the wireless user in the specified amount of time. Network infrastructure might be down."
GINA Error on Bootup
If your computer ever experiences a GINA error on bootup, boot to the safe mode command prompt. Then copy the msgina.dll file in the WinNT\System32 directory (Windows 2000) or Windows\System32 directory (Windows XP) over to a file named cscogina.dll. The copy command enables you to copy a source file (msgina.dll) to a destination file (cscogina.dll) within the same directory.
Reboot Required When Uninstalling ACU and ADU
Caution When you uninstall ACU and ADU, be sure to reboot your computer when prompted. Otherwise, the system may be rendered unable to boot, displaying the message "The Logon User Interface DLL cswGina.dll failed to load. Contact your system administrator to replace the DLL or restore the original DLL."
Uninstalling Software Components
All profiles and stored PAC files are deleted if you use the Uninstall the previous installation option on the Previous Installation Detected Install Wizard window to uninstall the client adapter software. Cisco recommends that you use the Profile Manager's export feature to save your profiles before uninstalling the software.
Profiles for PC-Cardbus Cards
The profiles for PC-Cardbus cards are tied to the slot in which the card is inserted. Therefore, you must always insert your PC-Cardbus card into the same slot, create profiles for both slots, or export the profiles for one slot and import them for the other slot.
Auto Profile Selection Enables Scan of Wireless Modes in Auto-Selected Profiles
When you enable auto profile selection, the client adapter ignores the selected profile's wireless mode setting and scans the wireless modes specified by all the profiles in the auto profile selection list for an available network. Using this method, the client does not need to disassociate nor change the current profile while looking for networks in other profiles.
ASTU Exit Option
The Exit option on the Aironet System Tray Utility (ASTU) pop-up menu closes both ASTU and ADU.
Windows Wireless Network Connection Icon Shows Unavailable Connection (Windows XP Only)
If your computer is running Windows XP and you configured your client adapter using ADU, the Windows Wireless Network Connection icon in the Windows system tray may be marked with a red X and show an unavailable connection even though a wireless connection exists. This condition is caused by a conflict between ADU and Windows XP's wireless network settings. Simply ignore the Windows icon and use the ASTU icon to check the status of your client adapter's wireless connection.
Supporting Documentation
The Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide (OL-4211-04) pertains specifically to CB21AG and PI21AG client adapters. If you are using a Cisco Aironet 340, 350, or CB20A client adapter, refer to the Installation and Configuration Guide for that client adapter and your computer's operating system.
Installing or Upgrading Client Adapter Software
This section describes how to initially install or upgrade to CB21AG and PI21AG Install Wizard 2.6 on a computer running Windows 2000 or XP. If the client adapter software is not installed on your computer, follow the instructions in the "Installing the Client Adapter Software" section below. If you are upgrading your client adapter software to release 2.6, follow the instructions in the "Upgrading the Client Adapter Software" section.
Installing the Client Adapter Software
Follow these steps to install CB21AG and PI21AG Install Wizard 2.6 on your computer.
Caution Do not eject your client adapter at any time during the installation process, including during the reboot.
Note Only one wireless client adapter can be installed and used at a time. The software does not support the use of multiple cards.
Step 1 Make sure the client adapter is inserted into your computer.
Step 2 Use your computer's web browser to access the following URL:
http://tools.cisco.com/support/downloads/pub/MDFTree.x?butype=wireless
Step 3 Click Wireless LAN Access.
Step 4 Click Cisco Wireless LAN Client Adapters.
Step 5 Click Cisco Aironet Wireless LAN Client Adapters.
Step 6 Click Cisco Aironet 802.11a/b/g CardBus Wireless LAN Client Adapter or Cisco Aironet 802.11a/b/g PCI Wireless LAN Client Adapter.
Step 7 Click Aironet Client Installation Wizard (Firmware, Driver, Utility).
Step 8 Click Windows 2000 or Windows XP.
Step 9 Click 2.6.
Step 10 Click the executable file (*.exe) that appears on your screen.
Step 11 Click Download.
Step 12 Read the software download rules and click Agree.
Step 13 Save the file to your computer's hard drive.
Step 14 Use Windows Explorer to find the file.
Step 15 Double-click the file. The "Starting InstallShield Wizard" message appears followed by the Preparing Setup window (see Figure 1) and the Cisco Aironet Installation Program window (see Figure 2).
Figure 1 Preparing Setup Window
Figure 2 Cisco Aironet Installation Program Window
Step 16 Click Next. The Setup Type window appears (see Figure 3).
Figure 3 Setup Type Window
Step 17 Choose one of the following options and click Next:
Note To ensure compatibility among software components, Cisco recommends that you install the client utilities and driver.
•Install Client Utilities and Driver—Installs the client adapter driver and client utilities.
•Install Driver Only—Installs only the client adapter driver. If you choose this option, click Next and go to Step 29.
•Make Driver Installation Diskette(s)—Enables you to create driver installation diskettes that can be used to install drivers using the Windows Device Manager.
Note If you choose one of the first two options and a client adapter is not inserted into your computer, the following message appears: "The device may not be present or could have been ejected/unplugged from the system. Insert or reinsert it now." Insert the client adapter and click OK. If you proceed without the client adapter inserted, the installation continues, but the driver installation is incomplete. You must manually install the driver later using the Update Device Driver Wizard. See Chapter 9 of the Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide (OL-4211-04) for instructions.
Step 18 When the Install Cisco Aironet Site Survey Utility window appears (see Figure 4), check the Install Cisco Aironet Site Survey Utility check box if you want to install a utility that helps you to determine the best placement of infrastructure devices within your wireless network. Click Next.
Figure 4 Install Cisco Aironet Site Survey Utility Window
Note The site survey utility is a stand-alone application, separate from ADU, that runs from an executable file. If you check the Install Cisco Aironet Site Survey Utility check box, the Install Wizard installs the site survey executable file in the C:\Program Files\Cisco Aironet directory (unless you specify a different directory in Step 20).
Step 19 If a message appears indicating that you are required to restart your computer at the end of the installation process, click Yes.
Note If you click No, you are asked to confirm your decision. If you proceed, the installation process terminates.
The Choose Destination Location window appears (see Figure 5).
Figure 5 Choose Destination Location Window
Step 20 Perform one of the following:
•If you chose the first option in Step 17, click Next to install the client utility files in the C:\Program Files\Cisco Aironet directory.
Note If you want to install the client utilities in a different directory, click Browse, choose a different directory, click OK, and click Next.
•If you chose the Make Driver Installation Diskette(s) option in Step 17, insert a floppy disk into your computer and click Next to copy the driver to the diskette. Go to Step 29.
Note If you want to copy the driver to a different drive or directory, click Browse, choose a new location, click OK, and click Next.
Step 21 The Select Program Folder window appears (see Figure 6).
Figure 6 Select Program Folder Window
Step 22 Click Next to add program icons to the Cisco Aironet program folder.
Note If you want to specify a different program folder, choose a folder from the Existing Folders list or type a new folder name in the Program Folder field and click Next.
Step 23 If your computer is running Windows 2000, go to Step 29. If your computer is running Windows XP, the IMPORTANT: Please Read! window appears (see Figure 7).
Figure 7 IMPORTANT: Please Read! Window
Step 24 Read the information displayed and click Next. The Choose Configuration Tool window appears (see Figure 8).
Figure 8 Choose Configuration Tool Window
Step 25 Choose one of the following options based on the tool you want to use to configure your client adapter:
•Cisco Aironet Desktop Utility (ADU)—Enables you to configure your client adapter using ADU.
•Third-Party Tool—Enables you to configure your client adapter using a third-party tool such as the Microsoft Wireless Configuration Manager in Windows XP.
Note If you choose Cisco Aironet Desktop Utility (ADU) above, the Microsoft Wireless Configuration Manager is disabled. If you ever manually enable it, you are prompted to disable it whenever ADU is activated.
Step 26 Click Next.
Step 27 If you chose Cisco Aironet Desktop Utility (ADU) in Step 25, go to Step 29. If you chose Third-Party Tool, the Enable Tray Icon window appears (see Figure 9).
Figure 9 Enable Tray Icon Window
Step 28 Check the Enable Cisco Aironet System Tray Utility (ASTU) check box if you want to be able to use ASTU even though you have chosen to configure your client adapter through a third-party tool instead of ADU and click Next.
Step 29 When prompted to insert your client adapter, click OK. The Setup Status window appears (see Figure 10).
Figure 10 Setup Status Window
The installation process begins, and you are notified as each software component is installed.
Step 30 When a message appears indicating that your computer needs to be rebooted, click OK and allow your computer to restart.
Step 31 If the Windows Found New Hardware Wizard appears after your computer reboots, click Next, allow the wizard to install the software for the client adapter, and click Finish.
Step 32 If your network setup does not include a DHCP server and you plan to use TCP/IP, follow these steps for your operating system.
•Windows 2000
a. Double-click My Computer, Control Panel, and Network and Dial-up Connections.
b. Right-click Local Area Connection x (where x represents the number of the connection).
c. Click Properties.
d. In the Components Checked Are Used by This Connection field, click Internet Protocol (TCP/IP) and Properties.
e. Choose Use the following IP address and enter the IP address, subnet mask, and default gateway address of your computer (which can be obtained from your system administrator).
f. Click OK to close each open window.
•Windows XP
a. Double-click My Computer, Control Panel, and Network Connections.
b. Right-click Wireless Network Connection x (where x represents the number of the connection).
c. Click Properties.
d. In the This Connection Uses the Following Items field, click Internet Protocol (TCP/IP) and Properties.
e. Choose Use the following IP address and enter the IP address, subnet mask, and default gateway address of your computer (which can be obtained from your system administrator).
f. Click OK to close each open window.
Step 33 If you are prompted to restart your computer, click Yes. The installation is complete.
Upgrading the Client Adapter Software
Follow these steps to upgrade your CB21AG or PI21AG client adapter software to release 2.6 using the settings that were selected during the last installation.
Note If you want to upgrade your client adapter software using new installation settings, you must uninstall the previous installation [see the instructions in Chapter 9 of the Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide] and then follow the instructions in the "Installing the Client Adapter Software" section to install the new software.
Step 1 Make sure the client adapter is inserted into your computer.
Note If your client adapter is not inserted, the installation continues, but the driver installation is incomplete. You must manually upgrade the driver later using the Update Device Driver Wizard. See Chapter 9 of the Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide (OL-4211-04) for instructions.
Step 2 Use your computer's web browser to access the following URL:
http://tools.cisco.com/support/downloads/pub/MDFTree.x?butype=wireless
Step 3 Click Wireless LAN Access.
Step 4 Click Cisco Wireless LAN Client Adapters.
Step 5 Click Cisco Aironet Wireless LAN Client Adapters.
Step 6 Click Cisco Aironet 802.11a/b/g CardBus Wireless LAN Client Adapter or Cisco Aironet 802.11a/b/g PCI Wireless LAN Client Adapter.
Step 7 Click Aironet Client Installation Wizard (Firmware, Driver, Utility).
Step 8 Click Windows 2000 or Windows XP.
Step 9 Click 2.6.
Step 10 Click the executable file (*.exe) that appears on your screen.
Step 11 Click Download.
Step 12 Read the software download rules and click Agree.
Step 13 Save the file to your computer's hard drive.
Step 14 Use Windows Explorer to find the file.
Step 15 Double-click the file. The "Starting InstallShield Wizard" message appears followed by the Preparing Setup window (see Figure 11) and the Previous Installation Detected window (see Figure 12).
Figure 11 Preparing Setup Window
Figure 12 Previous Installation Detected Window
Step 16 Choose Update the previous installation and click Next.
Step 17 When a message appears indicating that you are required to restart your computer at the end of the installation process, click Yes.
Note If you click No, you are asked to confirm your decision. If you proceed, the installation process terminates.
The Setup Status window appears (see Figure 13).
Figure 13 Setup Status Window
The upgrade process begins, and you are notified as each software component is installed.
Step 18 When a message appears indicating that your computer needs to be rebooted, click OK and allow your computer to restart. The client adapter's software has been upgraded.
Installing a Microsoft Hot Fix for Group Policy Delay
If you want to use the Group Policy Delay parameter on the Profile Management (Security) window in ADU 2.0 or later, you must install a Microsoft hot fix on computers running Windows 2000. The hot fix is incorporated into Windows XP Service Pack 2 and later.
The Group Policy Delay parameter enables you to specify how much time elapses before the Windows logon process starts Group Policy, a Windows feature used by administrators to specify configuration options for groups of users. The objective is to delay the start of Group Policy until wireless network authentication occurs. Follow the steps below to obtain and install the hot fix.
Note You must be a registered Cisco customer and log into Cisco.com in order to download the hot fix. If you are unable to access the hot fix from Cisco.com, contact Microsoft Support to obtain it. The Windows 2000 support page provides the contact information:
http://support.microsoft.com/oas/default.aspx?&c1=508&gprid=7274&
Step 1 Use your computer's web browser to access the following URL:
http://www.cisco.com/cgi-bin/tablebuild.pl/aironet_hotfix
Step 2 Click the hot fix file (userenv.zip).
Step 3 Complete the encryption authorization form and click Submit.
Step 4 Click the file again to download it.
Step 5 Save the file to your computer's hard drive.
Step 6 Find the file using Windows Explorer, double-click it, and extract its files to a folder.
Step 7 Reboot your computer and press F8 while your computer is booting.
Step 8 When the boot menu appears, select Safe Mode with Command Prompt.
Note You must complete this procedure in safe mode; otherwise, system file protection (SFP) will silently restore the original version of the file you are replacing.
Step 9 Copy the hot fix file (userenv.dll) to %systemroot%\System32 and overwrite the existing version of this file.
Step 10 Delete the copy of userenv.dll in %systemroot%\System32\DllCache.
Step 11 Reboot your computer.
Finding Version Numbers
Follow the instructions in this section to find the version numbers of your client adapter's software components.
Finding the Driver Version
To find the driver version that is currently installed for your client adapter, open ADU, click the Diagnostics tab, and click Adapter Information. The Driver Version field on the Adapter Information window shows the current driver version.
Finding the Version of ADU and Other Software Components
To find the version of ADU and other software components installed for your client adapter, open ADU and choose the About Aironet Desktop Utility option from the Help drop-down menu. The About window shows the current version of the following software components: ADU, ACAU, the authentication supplicant, the protocol driver, and the Windows NDIS miniport driver.
Caveats
This section describes the open and resolved caveats for the software components in this release.
Open Caveats
The following caveats are not resolved in CB21AG and PI21AG client adapter software release 2.6.
•CSCeh59294—Failure to find domain controller during LEAP authentication
The client adapter may be unable to find a domain controller when attempting to LEAP authenticate. This state can be a normal condition due to network unavailability.
•CSCeh59374—Switching between profiles is slow
The client adapter may take up to 40 seconds to switch from one profile to another.
•CSCei30892—Multi-byte username cannot pass EAP-FAST authentication
The CB21AG and PI21AG client adapters are unable to successfully EAP-FAST authenticate with an ACS server when the username contains multi-byte characters.
•CSCei40773—Incorrect messages on LEAP and EAP-FAST Authentication Status windows
The LEAP and EAP-FAST Authentication Status windows show a successful status even if an IPX frame type is not detected or a domain controller is not found on the network.
•CSCei67234—Profile Migration Tool's -AllowReRun command generates two ASTU icons
Two ASTU icons appear in the Windows system tray after you use the Profile Migration Tool's -AllowReRun command line option.
•CSCei86829—Unchecking QoS Packet Scheduler disrupts ADU and ASTU
When you uncheck the QoS Packet Scheduler check box on the Windows XP Wireless Network Connection Properties window, most of the ADU fields become grayed out, and the ASTU icon disappears from the Windows system tray. To work around this problem, perform one of the following: check the QoS Packet Scheduler check box, disable and reenable the wireless network connection, or eject and reinsert the client adapter.
•CSCsb46833—IOS access point with EAP-secured SSID toggles between "Open" and "Secure"
When an IOS access point is configured with an SSID mapped to a VLAN and the SSID is secured with EAP and WPA-TKIP, then in the site survey utility's AP scan list, the access point may toggle between "Open" and "Secure." In this mode, the access point sends out the network configuration information in the beacon and probe responses. Certain fields may differ between beacons and probe responses when VLANs are enabled. The client adapter driver may report the fields from the beacon frame or probe response frame, whichever is received last.
•CSCsb53874—Timing error prevents MAC address authentication
When using MAC address authentication, the client adapter fails to authenticate due to a timing error. To work around this problem, do not use MAC address authentication.
•CSCsb90765—Client adapter fails to reassociate after WLSM is reset
When the Wireless LAN Services Module (WLSM) is rebooted, the client adapter disassociates from its access point. When WLSM comes back online and Wireless Domain Services (WDS) is available again, the client adapter does not automatically reassociate and therefore fails to reregister with WDS. To work around this problem, manually reauthenticate the client adapter using ADU.
Resolved Caveats
The following caveat is resolved in CB21AG and PI21AG client adapter software release 2.6.
•CSCsb81180—Client adapters may randomly disassociate
Client adapters may randomly disassociate from their access points and then fail to reassociate. To work around this problem, reboot the client.
Getting Bug Information on Cisco.com
If you are a Cisco registered user, you can use the Cisco TAC Software Bug Toolkit, which consists of three tools (Bug Navigator, Bug Watcher, and Search by Bug ID Number) that help you to identify existing bugs (or caveats) in Cisco software products.
Access the TAC Software Bug Toolkit at the following URL:
http://www.cisco.com/pcgi-bin/Support/Bugtool/launch_bugtool.pl
Troubleshooting
For the most up-to-date, detailed troubleshooting information, refer to the Cisco TAC website at
http://www.cisco.com/en/US/support/index.html
Click Product Support > Wireless. Then choose your product and Troubleshooting to find information on the problem you are experiencing.
Related Documentation
For more information about Cisco Aironet CB21AG and PI21AG client adapters, refer to the following document:
•Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide, OL-4211-04
Obtaining Documentation
Cisco documentation and additional literature are available on Cisco.com. Cisco also provides several ways to obtain technical assistance and other technical resources. These sections explain how to obtain technical information from Cisco Systems.
Cisco.com
You can access the most current Cisco documentation at this URL:
http://www.cisco.com/techsupport
You can access the Cisco website at this URL:
You can access international Cisco websites at this URL:
http://www.cisco.com/public/countries_languages.shtml
Product Documentation DVD
Cisco documentation and additional literature are available in the Product Documentation DVD package, which may have shipped with your product. The Product Documentation DVD is updated regularly and may be more current than printed documentation.
The Product Documentation DVD is a comprehensive library of technical product documentation on portable media. The DVD enables you to access multiple versions of hardware and software installation, configuration, and command guides for Cisco products and to view technical documentation in HTML. With the DVD, you have access to the same documentation that is found on the Cisco website without being connected to the Internet. Certain products also have .pdf versions of the documentation available.
The Product Documentation DVD is available as a single unit or as a subscription. Registered Cisco.com users (Cisco direct customers) can order a Product Documentation DVD (product number DOC-DOCDVD=) from Cisco Marketplace at this URL:
http://www.cisco.com/go/marketplace/
Ordering Documentation
Beginning June 30, 2005, registered Cisco.com users may order Cisco documentation at the Product Documentation Store in the Cisco Marketplace at this URL:
http://www.cisco.com/go/marketplace/
Nonregistered Cisco.com users can order technical documentation from 8:00 a.m. to 5:00 p.m. (0800 to 1700) PDT by calling 1 866 463-3487 in the United States and Canada, or elsewhere by calling 011 408 519-5055. You can also order documentation by e-mail at tech-doc-store-mkpl@external.cisco.com or by fax at 1 408 519-5001 in the United States and Canada, or elsewhere at 011 408 519-5001.
Documentation Feedback
You can rate and provide feedback about Cisco technical documents by completing the online feedback form that appears with the technical documents on Cisco.com.
You can send comments about Cisco documentation to bug-doc@cisco.com.
You can submit comments by using the response card (if present) behind the front cover of your document or by writing to the following address:
Cisco Systems
Attn: Customer Document Ordering
170 West Tasman Drive
San Jose, CA 95134-9883We appreciate your comments.
Cisco Product Security Overview
Cisco provides a free online Security Vulnerability Policy portal at this URL:
http://www.cisco.com/en/US/products/products_security_vulnerability_policy.html
From this site, you can perform these tasks:
•Report security vulnerabilities in Cisco products.
•Obtain assistance with security incidents that involve Cisco products.
•Register to receive security information from Cisco.
A current list of security advisories and notices for Cisco products is available at this URL:
If you prefer to see advisories and notices as they are updated in real time, you can access a Product Security Incident Response Team Really Simple Syndication (PSIRT RSS) feed from this URL:
http://www.cisco.com/en/US/products/products_psirt_rss_feed.html
Reporting Security Problems in Cisco Products
Cisco is committed to delivering secure products. We test our products internally before we release them, and we strive to correct all vulnerabilities quickly. If you think that you might have identified a vulnerability in a Cisco product, contact PSIRT:
•Emergencies — security-alert@cisco.com
An emergency is either a condition in which a system is under active attack or a condition for which a severe and urgent security vulnerability should be reported. All other conditions are considered nonemergencies.
•Nonemergencies — psirt@cisco.com
In an emergency, you can also reach PSIRT by telephone:
•1 877 228-7302
•1 408 525-6532
Tip We encourage you to use Pretty Good Privacy (PGP) or a compatible product to encrypt any sensitive information that you send to Cisco. PSIRT can work from encrypted information that is compatible with PGP versions 2.x through 8.x.
Never use a revoked or an expired encryption key. The correct public key to use in your correspondence with PSIRT is the one linked in the Contact Summary section of the Security Vulnerability Policy page at this URL:
http://www.cisco.com/en/US/products/products_security_vulnerability_policy.html
The link on this page has the current PGP key ID in use.
Obtaining Technical Assistance
Cisco Technical Support provides 24-hour-a-day award-winning technical assistance. The Cisco Technical Support & Documentation website on Cisco.com features extensive online support resources. In addition, if you have a valid Cisco service contract, Cisco Technical Assistance Center (TAC) engineers provide telephone support. If you do not have a valid Cisco service contract, contact your reseller.
Cisco Technical Support & Documentation Website
The Cisco Technical Support & Documentation website provides online documents and tools for troubleshooting and resolving technical issues with Cisco products and technologies. The website is available 24 hours a day, at this URL:
http://www.cisco.com/techsupport
Access to all tools on the Cisco Technical Support & Documentation website requires a Cisco.com user ID and password. If you have a valid service contract but do not have a user ID or password, you can register at this URL:
http://tools.cisco.com/RPF/register/register.do
Note Use the Cisco Product Identification (CPI) tool to locate your product serial number before submitting a web or phone request for service. You can access the CPI tool from the Cisco Technical Support & Documentation website by clicking the Tools & Resources link under Documentation & Tools. Choose Cisco Product Identification Tool from the Alphabetical Index drop-down list, or click the Cisco Product Identification Tool link under Alerts & RMAs. The CPI tool offers three search options: by product ID or model name; by tree view; or for certain products, by copying and pasting show command output. Search results show an illustration of your product with the serial number label location highlighted. Locate the serial number label on your product and record the information before placing a service call.
Submitting a Service Request
Using the online TAC Service Request Tool is the fastest way to open S3 and S4 service requests. (S3 and S4 service requests are those in which your network is minimally impaired or for which you require product information.) After you describe your situation, the TAC Service Request Tool provides recommended solutions. If your issue is not resolved using the recommended resources, your service request is assigned to a Cisco engineer. The TAC Service Request Tool is located at this URL:
http://www.cisco.com/techsupport/servicerequest
For S1 or S2 service requests or if you do not have Internet access, contact the Cisco TAC by telephone. (S1 or S2 service requests are those in which your production network is down or severely degraded.) Cisco engineers are assigned immediately to S1 and S2 service requests to help keep your business operations running smoothly.
To open a service request by telephone, use one of the following numbers:
Asia-Pacific: +61 2 8446 7411 (Australia: 1 800 805 227)
EMEA: +32 2 704 55 55
USA: 1 800 553-2447For a complete list of Cisco TAC contacts, go to this URL:
http://www.cisco.com/techsupport/contacts
Definitions of Service Request Severity
To ensure that all service requests are reported in a standard format, Cisco has established severity definitions.
Severity 1 (S1)—Your network is "down," or there is a critical impact to your business operations. You and Cisco will commit all necessary resources around the clock to resolve the situation.
Severity 2 (S2)—Operation of an existing network is severely degraded, or significant aspects of your business operation are negatively affected by inadequate performance of Cisco products. You and Cisco will commit full-time resources during normal business hours to resolve the situation.
Severity 3 (S3)—Operational performance of your network is impaired, but most business operations remain functional. You and Cisco will commit resources during normal business hours to restore service to satisfactory levels.
Severity 4 (S4)—You require information or assistance with Cisco product capabilities, installation, or configuration. There is little or no effect on your business operations.
Obtaining Additional Publications and Information
Information about Cisco products, technologies, and network solutions is available from various online and printed sources.
•Cisco Marketplace provides a variety of Cisco books, reference guides, documentation, and logo merchandise. Visit Cisco Marketplace, the company store, at this URL:
http://www.cisco.com/go/marketplace/
•Cisco Press publishes a wide range of general networking, training and certification titles. Both new and experienced users will benefit from these publications. For current Cisco Press titles and other information, go to Cisco Press at this URL:
•Packet magazine is the Cisco Systems technical user magazine for maximizing Internet and networking investments. Each quarter, Packet delivers coverage of the latest industry trends, technology breakthroughs, and Cisco products and solutions, as well as network deployment and troubleshooting tips, configuration examples, customer case studies, certification and training information, and links to scores of in-depth online resources. You can access Packet magazine at this URL:
•iQ Magazine is the quarterly publication from Cisco Systems designed to help growing companies learn how they can use technology to increase revenue, streamline their business, and expand services. The publication identifies the challenges facing these companies and the technologies to help solve them, using real-world case studies and business strategies to help readers make sound technology investment decisions. You can access iQ Magazine at this URL:
http://www.cisco.com/go/iqmagazine
or view the digital edition at this URL:
http://ciscoiq.texterity.com/ciscoiq/sample/
•Internet Protocol Journal is a quarterly journal published by Cisco Systems for engineering professionals involved in designing, developing, and operating public and private internets and intranets. You can access the Internet Protocol Journal at this URL:
•Networking products offered by Cisco Systems, as well as customer support services, can be obtained at this URL:
http://www.cisco.com/en/US/products/index.html
•Networking Professionals Connection is an interactive website for networking professionals to share questions, suggestions, and information about networking products and technologies with Cisco experts and other networking professionals. Join a discussion at this URL:
http://www.cisco.com/discuss/networking
•World-class networking training is available from Cisco. You can view current offerings at this URL:
http://www.cisco.com/en/US/learning/index.html
This document is to be used in conjunction with the documents listed in the "Related Documentation" section.
CCSP, CCVP, the Cisco Square Bridge logo, Follow Me Browsing, and StackWise are trademarks of Cisco Systems, Inc.; Changing the Way We Work, Live, Play, and Learn, and iQuick Study are service marks of Cisco Systems, Inc.; and Access Registrar, Aironet, ASIST, BPX, Catalyst, CCDA, CCDP, CCIE, CCIP, CCNA, CCNP, Cisco, the Cisco Certified Internetwork Expert logo, Cisco IOS, Cisco Press, Cisco Systems, Cisco Systems Capital, the Cisco Systems logo, Cisco Unity, Empowering the Internet Generation, Enterprise/Solver, EtherChannel, EtherFast, EtherSwitch, Fast Step, FormShare, GigaDrive, GigaStack, HomeLink, Internet Quotient, IOS, IP/TV, iQ Expertise, the iQ logo, iQ Net Readiness Scorecard, LightStream, Linksys, MeetingPlace, MGX, the Networkers logo, Networking Academy, Network Registrar, Packet, PIX, Post-Routing, Pre-Routing, ProConnect, RateMUX, ScriptShare, SlideCast, SMARTnet, StrataView Plus, TeleRouter, The Fastest Way to Increase Your Internet Quotient, and TransPath are registered trademarks of Cisco Systems, Inc. and/or its affiliates in the United States and certain other countries.
All other trademarks mentioned in this document or Website are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (0502R)
Copyright © 2005 Cisco Systems, Inc.
All rights reserved.