Channels and Antenna Settings
This appendix lists the channels and the maximum power levels and antenna gains supported by the world's regulatory domains.
The following topics are covered in this appendix:
•Channels
•Maximum Power Levels and Antenna Gains
Channels
The channel identifiers, channel center frequencies, and regulatory domains of each 22-MHz-wide channel are shown in Table D-1.
Table D-1 Channels
|
|
|
|
|
|
|
1 |
2412 MHz |
X |
X |
X |
- |
2 |
2417 MHz |
X |
X |
X |
- |
3 |
2422 MHz |
X |
X |
X |
X |
4 |
2427 MHz |
X |
X |
X |
X |
5 |
2432 MHz |
X |
X |
X |
X |
6 |
2437 MHz |
X |
X |
X |
X |
7 |
2442 MHz |
X |
X |
X |
X |
8 |
2447 MHz |
X |
X |
X |
X |
9 |
2452 MHz |
X |
X |
X |
X |
10 |
2457 MHz |
X |
X |
X |
- |
11 |
2462 MHz |
X |
X |
X |
- |
12 |
2467 MHz |
- |
X |
X |
- |
13 |
2472 MHz |
- |
X |
X |
- |
14 |
2484 MHz |
- |
- |
X |
- |
Note Mexico is included in the North America regulatory domain; however, only channels 9 through 11 can be used in Mexico. Users are responsible for ensuring that the channel set configuration is in compliance with the regulatory standards of Mexico.
Maximum Power Levels and Antenna Gains
An improper combination of power level and antenna gain can result in equivalent isotropic radiated power (EIRP) above the amount allowed per regulatory domain. Table D-2 indicates the maximum power levels and antenna gains allowed for each regulatory domain.
Table D-2 Maximum Power Levels Per Antenna Gain
|
|
|
North America and ANZ (4 watts EIRP maximum) |
0 |
100 |
2.2 |
100 |
5.2 |
100 |
6 |
100 |
8.5 |
100 |
12 |
100 |
13.5 |
100 |
21 |
20 |
ETSI (100 mW EIRP maximum) |
0 |
100 |
2.2 |
50 |
5.2 |
30 |
6 |
30 |
8.5 |
5 |
12 |
5 |
13.5 |
5 |
21 |
1 |
Japan (10 mW/MHz EIRP maximum) |
0 |
50 |
2.2 |
30 |
5.2 |
30 |
6 |
30 |
8.5 |
n/a |
12 |
n/a |
13.5 |
5 |
21 |
n/a |
Israel (100 mW EIRP maximum) |
0 |
100 |
2.2 |
50 |
5.2 |
30 |
6 |
30 |
8.5 |
5 |
12 |
5 |
13.5 |
5 |
21 |
1 |