Table Of Contents
Release Notes for Cisco Aironet Client Adapter Firmware, Version 5.02.20
No Support for Linux and Mac OS
Cisco Aironet Software Requires Completion of Encryption Authorization Form
Reporting Access Points that Fail LEAP Authentication
Upgrading to a New Firmware Release
Getting Bug Information on Cisco.com
Obtaining Technical Assistance
Obtaining Additional Publications and Information
Release Notes for Cisco Aironet Client Adapter Firmware, Version 5.02.20
Contents
This document contains the following sections:
•Upgrading to a New Firmware Release
•Getting Bug Information on Cisco.com
•Obtaining Technical Assistance
•Obtaining Additional Publications and Information
Introduction
This document describes system requirements, important notes, new and changed information, and upgrade procedures for Cisco Aironet client adapter firmware release 5.02.20.
System Requirements
You need the following in order to install client adapter firmware version 5.02.20:
•One of the following Cisco Aironet client adapters:
–340, 350, or 4800 series PC, LM, or PCI card
–350 series mini PCI card
–PC-Cardbus (CB20A) card
•A computer running one of the following operating systems:
–Windows 98, 98 SE, NT, 2000, Me, or XP
–Windows CE 3.0, 4.0, or 4.1
•The following client adapter software for your computer's operating system:
–Install Wizard version 1.0 for Windows, which includes PCM/LMC/PCI card driver version 8.3, mini PCI and PC-Cardbus card driver version 3.5, ACU version 6.0, ACM version 2.0, LEAP security module version 6.0, PEAP security module version 1.01, and EAP-SIM security module version 1.0
–Driver and client utility version 2.30 for Windows CE
•To ensure compatibility between wireless devices, access points to which your client adapter may attempt to authenticate must use the following firmware versions or greater: 12.00T (340, 350, and 1200 series access points) or 12.2(4)JA (1100 series access points).
Important Notes
No Support for Linux and Mac OS
Firmware release 5.02.20 is not supported for use on Linux and Mac operating systems.
Cisco Aironet Software Requires Completion of Encryption Authorization Form
In order to access Cisco Aironet software from the Software Center on Cisco.com, you must now fill out a form to receive authorization to download encrypted software. Registered Cisco.com users are required to fill out the form only once while public users must do so once each session, each time software is downloaded. A form is automatically created for public users. The form for registered Cisco.com users is located at the following URL:
http://www.cisco.com/cgi-bin/Software/Crypto/crypto_main.pl
New and Changed Information
This section describes new and changed information for Cisco Aironet client adapter firmware release 5.02.20.
Reporting Access Points that Fail LEAP Authentication
Client adapter firmware version 5.02.20 and the following access point firmware versions support a new feature that is designed to detect access points that fail LEAP authentication:
•12.00T or greater (340, 350, and 1200 series access points)
•12.2(4)JA or greater (1100 series access points)
An access point running one of these firmware versions records a message in the system log when a client running firmware version 5.02.20 discovers and reports another access point in the wireless network that has failed LEAP authentication.
The process takes place as follows:
1. A client with a LEAP profile attempts to associate to access point A.
2. Access point A does not handle LEAP authentication successfully, perhaps because the access point does not understand LEAP or cannot communicate to a trusted LEAP authentication server.
3. The client records the MAC address for access point A and the reason why the association failed.
4. The client associates successfully to access point B.
5. The client sends the MAC address of access point A and the reason code for the failure to access point B.
6. Access point B logs the failure in the system log.
Note This feature does not need to be enabled on the client adapter or access point; it is supported automatically in the firmware of both devices. However, both the clients and access points must use these firmware versions or greater.
Upgrading to a New Firmware Release
Caution To minimize the risk of a power failure during the firmware flashing process, which could render your client adapter inoperable, Cisco recommends that your computer be plugged into AC power or have a fully charged battery at the start of flashing. If a power failure does occur, follow the instructions in the "Obtaining Technical Assistance" section to contact TAC for assistance.
This section describes how to upgrade to client adapter firmware release 5.02.20 on a computer running Windows 98, 98 SE, NT, 2000, Me, or XP. Refer to the following document for instructions on upgrading the firmware on a Windows CE device:
Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE, version -03
http://www.cisco.com/univercd/cc/td/doc/product/wireless/airo_350/350cards/win_ce/hig/index.htm
Finding the Firmware Version
To find the firmware version that your client adapter is currently using on a computer running Windows 98, 98 SE, NT, 2000, Me, or XP, open ACU and click the Status icon. The firmware version is displayed in the Firmware Version field on the Status screen.
Upgrading the Firmware
Follow the steps below to upgrade your client adapter's firmware to version 5.02.20 on a Windows 98, 98 SE, NT, 2000, Me, or XP computer.
Step 1 Use the computer's web browser to access the following URL:
http://www.cisco.com/public/sw-center/sw-wireless.shtml
Step 2 Select Option #2: Aironet Wireless Software Display Tables.
Note You can download software from the Software Selector tool instead of the display tables. To do so, select Option #1: Aironet Wireless Software Selector, follow the instructions on the screen, and go to Step 7.
Step 3 Select Cisco Aironet Wireless LAN Client Adapters.
Step 4 Under Individual Files, find the client adapter firmware.
Step 5 Click the link that corresponds to your client adapter's model number (such as 340 or 350 series).
Step 6 Select the latest firmware file for your specific client adapter type (such as CB or MPI).
Note The firmware for PC, LM, and PCI cards is labeled PCMCIA-LMC-PCI, the firmware for mini PCI cards is labeled mini PCI or MPI, and the firmware for PC-Cardbus cards is labeled CB.
Step 7 Read and accept the terms and conditions of the Software License Agreement.
Step 8 Select the firmware file again to download it.
Step 9 Save the file to a floppy disk or to your computer's hard drive.
Step 10 Find the file using Windows Explorer, double-click it, and extract the image file to a folder.
Note To extract the file, click Browse on the WinZip Self-Extractor screen, select the folder where you want the file to placed, click OK and Unzip. After the file has been extracted, click OK to close the screen.
Step 11 Make sure the client adapter is installed in your computer and is operational.
Step 12 Open ACU and click the Load Firmware icon. The Load New Firmware screen appears (see Figure 1).
Figure 1 Load New Firmware Screen
Step 13 Find the location of the new firmware in the Look in box.
Step 14 Click the firmware image file (*.img) so that it appears in the File name box at the bottom of the screen.
Step 15 Click the Open button. A progress bar appears while the selected image is loaded into the client adapter's Flash memory.
Step 16 Click OK when the "Firmware Upgrade Complete!" message appears. The OK button cannot be selected until the process is complete or an error occurs.
Getting Bug Information on Cisco.com
If you are a Cisco registered user, you can use the Cisco TAC Software Bug Toolkit, which consists of three tools (Bug Navigator, Bug Watcher, and Search by Bug ID Number) that help you to identify existing bugs (or caveats) in Cisco software products.
Access the TAC Software Bug Toolkit today at the following URL:
http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl
Troubleshooting
For the most up-to-date, detailed troubleshooting information, refer to the Cisco TAC website at
http://www.cisco.com/en/US/support/index.html
Select Wireless Troubleshooting Center under Tools & Utilities.
Related Documentation
For more information about Cisco Aironet client adapters, refer to the following documents:
•Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for Windows, version -05
•Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE, version -03
Obtaining Documentation
Cisco provides several ways to obtain documentation, technical assistance, and other technical resources. These sections explain how to obtain technical information from Cisco Systems.
Cisco.com
You can access the most current Cisco documentation on the World Wide Web at this URL:
http://www.cisco.com/univercd/home/home.htm
You can access the Cisco website at this URL:
International Cisco web sites can be accessed from this URL:
http://www.cisco.com/public/countries_languages.shtml
Documentation CD-ROM
Cisco documentation and additional literature are available in a Cisco Documentation CD-ROM package, which may have shipped with your product. The Documentation CD-ROM is updated monthly and may be more current than printed documentation. The CD-ROM package is available as a single unit or through an annual subscription.
Registered Cisco.com users can order the Documentation CD-ROM (product number DOC-CONDOCCD=) through the online Subscription Store:
http://www.cisco.com/go/subscription
Ordering Documentation
You can find instructions for ordering documentation at this URL:
http://www.cisco.com/univercd/cc/td/doc/es_inpck/pdi.htm
You can order Cisco documentation in these ways:
•Registered Cisco.com users (Cisco direct customers) can order Cisco product documentation from the Networking Products MarketPlace:
http://www.cisco.com/en/US/partner/ordering/index.shtml
•Registered Cisco.com users can order the Documentation CD-ROM (Customer Order Number DOC-CONDOCCD=) through the online Subscription Store:
http://www.cisco.com/go/subscription
•Nonregistered Cisco.com users can order documentation through a local account representative by calling Cisco Systems Corporate Headquarters (California, U.S.A.) at 408 526-7208 or, elsewhere in North America, by calling 800 553-NETS (6387).
Documentation Feedback
You can submit comments electronically on Cisco.com. On the Cisco Documentation home page, click Feedback at the top of the page.
You can e-mail your comments to bug-doc@cisco.com.
You can submit your comments by mail by using the response card behind the front cover of your document or by writing to the following address:
Cisco Systems
Attn: Customer Document Ordering
170 West Tasman Drive
San Jose, CA 95134-9883We appreciate your comments.
Obtaining Technical Assistance
Cisco provides Cisco.com, which includes the Cisco Technical Assistance Center (TAC) Website, as a starting point for all technical assistance. Customers and partners can obtain online documentation, troubleshooting tips, and sample configurations from the Cisco TAC website. Cisco.com registered users have complete access to the technical support resources on the Cisco TAC website, including TAC tools and utilities.
Cisco.com
Cisco.com offers a suite of interactive, networked services that let you access Cisco information, networking solutions, services, programs, and resources at any time, from anywhere in the world.
Cisco.com provides a broad range of features and services to help you with these tasks:
•Streamline business processes and improve productivity
•Resolve technical issues with online support
•Download and test software packages
•Order Cisco learning materials and merchandise
•Register for online skill assessment, training, and certification programs
To obtain customized information and service, you can self-register on Cisco.com at this URL:
Technical Assistance Center
The Cisco TAC is available to all customers who need technical assistance with a Cisco product, technology, or solution. Two levels of support are available: the Cisco TAC website and the Cisco TAC Escalation Center. The avenue of support that you choose depends on the priority of the problem and the conditions stated in service contracts, when applicable.
We categorize Cisco TAC inquiries according to urgency:
•Priority level 4 (P4)—You need information or assistance concerning Cisco product capabilities, product installation, or basic product configuration.
•Priority level 3 (P3)—Your network performance is degraded. Network functionality is noticeably impaired, but most business operations continue.
•Priority level 2 (P2)—Your production network is severely degraded, affecting significant aspects of business operations. No workaround is available.
•Priority level 1 (P1)—Your production network is down, and a critical impact to business operations will occur if service is not restored quickly. No workaround is available.
Cisco TAC Website
You can use the Cisco TAC website to resolve P3 and P4 issues yourself, saving both cost and time. The site provides around-the-clock access to online tools, knowledge bases, and software. To access the Cisco TAC website, go to this URL:
All customers, partners, and resellers who have a valid Cisco service contract have complete access to the technical support resources on the Cisco TAC website. Some services on the Cisco TAC website require a Cisco.com login ID and password. If you have a valid service contract but do not have a login ID or password, go to this URL to register:
http://tools.cisco.com/RPF/register/register.do
If you are a Cisco.com registered user, and you cannot resolve your technical issues by using the Cisco TAC website, you can open a case online at this URL:
http://www.cisco.com/en/US/support/index.html
If you have Internet access, we recommend that you open P3 and P4 cases through the Cisco TAC website so that you can describe the situation in your own words and attach any necessary files.
Cisco TAC Escalation Center
The Cisco TAC Escalation Center addresses priority level 1 or priority level 2 issues. These classifications are assigned when severe network degradation significantly impacts business operations. When you contact the TAC Escalation Center with a P1 or P2 problem, a Cisco TAC engineer automatically opens a case.
To obtain a directory of toll-free Cisco TAC telephone numbers for your country, go to this URL:
http://www.cisco.com/warp/public/687/Directory/DirTAC.shtml
Before calling, please check with your network operations center to determine the level of Cisco support services to which your company is entitled: for example, SMARTnet, SMARTnet Onsite, or Network Supported Accounts (NSA). When you call the center, please have available your service agreement number and your product serial number.
Obtaining Additional Publications and Information
Information about Cisco products, technologies, and network solutions is available from various online and printed sources.
•The Cisco Product Catalog describes the networking products offered by Cisco Systems as well as ordering and customer support services. Access the Cisco Product Catalog at this URL:
http://www.cisco.com/en/US/products/products_catalog_links_launch.html
•Cisco Press publishes a wide range of networking publications. Cisco suggests these titles for new and experienced users: Internetworking Terms and Acronyms Dictionary, Internetworking Technology Handbook, Internetworking Troubleshooting Guide, and the Internetworking Design Guide. For current Cisco Press titles and other information, go to Cisco Press online at this URL:
•Packet magazine is the Cisco monthly periodical that provides industry professionals with the latest information about the field of networking. You can access Packet magazine at this URL:
http://www.cisco.com/en/US/about/ac123/ac114/about_cisco_packet_magazine.html
•iQ Magazine is the Cisco monthly periodical that provides business leaders and decision makers with the latest information about the networking industry. You can access iQ Magazine at this URL:
http://business.cisco.com/prod/tree.taf%3fasset_id=44699&public_view=true&kbns=1.html
•Internet Protocol Journal is a quarterly journal published by Cisco Systems for engineering professionals involved in the design, development, and operation of public and private internets and intranets. You can access the Internet Protocol Journal at this URL:
http://www.cisco.com/en/US/about/ac123/ac147/about_cisco_the_internet_protocol_journal.html
•Training—Cisco offers world-class networking training, with current offerings in network training listed at this URL:
http://www.cisco.com/en/US/learning/le31/learning_recommended_training_list.html
This document is to be used in conjunction with the documents listed in the "Related Documentation" section.
CCIP, CCSP, the Cisco Arrow logo, the Cisco Powered Network mark, the Cisco Systems Verified logo, Cisco Unity, Follow Me Browsing, FormShare, iQ Net Readiness Scorecard, Networking Academy, and ScriptShare are trademarks of Cisco Systems, Inc.; Changing the Way We Work, Live, Play, and Learn, The Fastest Way to Increase Your Internet Quotient, and iQuick Study are service marks of Cisco Systems, Inc.; and Aironet, ASIST, BPX, Catalyst, CCDA, CCDP, CCIE, CCNA, CCNP, Cisco, the Cisco Certified Internetwork Expert logo, Cisco IOS, the Cisco IOS logo, Cisco Press, Cisco Systems, Cisco Systems Capital, the Cisco Systems logo, Empowering the Internet Generation, Enterprise/Solver, EtherChannel, EtherSwitch, Fast Step, GigaStack, Internet Quotient, IOS, IP/TV, iQ Expertise, the iQ logo, LightStream, MGX, MICA, the Networkers logo, Network Registrar, Packet, PIX, Post-Routing, Pre-Routing, RateMUX, Registrar, SlideCast, SMARTnet, StrataView Plus, Stratm, SwitchProbe, TeleRouter, TransPath, and VCO are registered trademarks of Cisco Systems, Inc. and/or its affiliates in the U.S. and certain other countries.
All other trademarks mentioned in this document or Web site are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (0303R)
Copyright © 2003 Cisco Systems, Inc.
All rights reserved.