Cisco Service and Application Module for IP User Guide
Preface
Downloads: This chapterpdf (PDF - 643.0KB) The complete bookPDF (PDF - 3.24MB) | Feedback

About this Guide

Table Of Contents

About this Guide

Audience

Documentation Objectives

Documentation Organization

Documentation Conventions

Safety Warnings

Related Documentation

Obtaining Documentation, Obtaining Support, and Security Guidelines


About this Guide


This preface discusses the objectives, audience, organization, and conventions of this document.


Note Use this document along with the documents listed in the "Related Documentation" section.


Audience

Documentation Objectives

Documentation Organization

Documentation Conventions

Safety Warnings

Related Documentation

Obtaining Documentation, Obtaining Support, and Security Guidelines

Audience

This user guide is written for network administrators and other people who are responsible for setting up, installing, configuring, and maintaining the Cisco Service Application Module for IP (SAMI).

Only trained and qualified service personal (as defined in IEC 60950 and AS/NZS3260) should install, replace, or service the equipment described in this user guide.

Documentation Objectives

This user guide provides an overview of the Cisco SAMI, including its physical and functional features. Instructions on how to install and remove the SAMI, how to load images onto the module, and how to complete the initial configuration required for the SAMI to operate in your Cisco 7600 Series Router are included.


Note This document does not include configuration information for the Cisco software application running on the SAMI processors. For configuration on this, see the documentation for that application and refer to the "Related Documentation" section.


Documentation Organization

This user guide is organized as follows:

Chapter
Chapter Title
Description

1

Cisco Service and Application Module for IP Overview

Describes the SAMI architecture, software and hardware features, and system requirements.

2

Installing the Cisco SAMI

Describes general safety recommendations, site preparations, required tools and equipment, and provides steps to install, remove, and verify the installation of a SAMI in your Cisco 7600 Series Router.

3

Configuring the Cisco SAMI

Describes how to complete the configuration required to for the SAMI to operate in the Cisco 7600 Series Router.

4

Maintaining and Monitoring the Cisco SAMI

Describes how to maintain and monitor the SAMI, including the steps on how to upgrade the SAMI software, and configure maintenance-related functions such as monitoring path health and allocating processor memory.

Appendix A

Using the Command-Line Interfaces

Provides basic information about using the various command-line interfaces (CLIs).

Appendix B

Supervisor Console Commands

Lists the commands supported at the Cisco Supervisor in support of the Cisco SAMI, including the command syntax, usage guidelines, and examples.

Appendix C

SAMI Cisco IOS PPC Commands

Lists the commands supported at the SAMI Cisco IOS PPC console in support of Cisco IOS software applications, including the command syntax, usage guidelines, and examples.

Appendix D

SAMI COSLI PPC Commands

Lists the commands supported at the SAMI COSLI PPC console in support of Cisco software applications, including the command syntax, usage guidelines, and examples.

Appendix E

SAMI LCP Commands

Lists the commands supported at the SAMI LCP console, including the command syntax, usage guidelines, and examples.


Documentation Conventions

This guide uses the following conventions:

Convention
Description

boldface font

Commands and keywords; user-entered text.

italic font

Variables for which you supply values.

[      ]

Keywords or arguments that appear within square brackets are optional.

{x | y | z}

A choice of required keywords appears in braces separated by vertical bars. You must select one.

screen font

Examples of information displayed on the screen.

boldface screen font

Examples of information you must enter.

<    >

Nonprinting characters (for example, passwords) appear in angle brackets.

[    ]

Default responses to system prompts appear in square brackets.



Note Means take note. Notes contain helpful suggestions or references to material not covered in the user guide.



Timesaver Means the described action saves time.



Tip Means the following information will help you solve a problem.



Caution Means be careful "to avoid any action" that could result in equipment damage or loss of data.

Safety Warnings

Safety warnings appear throughout this user guide in procedures that, if performed incorrectly, might harm you. A warning symbol precedes each warning statement. The safety warnings provide safety guidelines that you should follow when working with any equipment that connects to electrical power or telephone wiring. Included in the warnings are translations in several languages.


Warning

IMPORTANT SAFETY INSTRUCTIONS

This warning symbol means danger. You are in a situation that could cause bodily injury. Before you work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard practices for preventing accidents. Use the statement number provided at the end of each warning to locate its translation in the translated safety warnings that accompanied this device. Statement 1071

SAVE THESE INSTRUCTIONS

Waarschuwing

BELANGRIJKE VEILIGHEIDSINSTRUCTIES

Dit waarschuwingssymbool betekent gevaar. U verkeert in een situatie die lichamelijk letsel kan veroorzaken. Voordat u aan enige apparatuur gaat werken, dient u zich bewust te zijn van de bij elektrische schakelingen betrokken risico's en dient u op de hoogte te zijn van de standaard praktijken om ongelukken te voorkomen. Gebruik het nummer van de verklaring onderaan de waarschuwing als u een vertaling van de waarschuwing die bij het apparaat wordt geleverd, wilt raadplegen.

BEWAAR DEZE INSTRUCTIES

Varoitus

TÄRKEITÄ TURVALLISUUSOHJEITA

Tämä varoitusmerkki merkitsee vaaraa. Tilanne voi aiheuttaa ruumiillisia vammoja. Ennen kuin käsittelet laitteistoa, huomioi sähköpiirien käsittelemiseen liittyvät riskit ja tutustu onnettomuuksien yleisiin ehkäisytapoihin. Turvallisuusvaroitusten käännökset löytyvät laitteen mukana toimitettujen käännettyjen turvallisuusvaroitusten joukosta varoitusten lopussa näkyvien lausuntonumeroiden avulla.

SÄILYTÄ NÄMÄ OHJEET

Attention

IMPORTANTES INFORMATIONS DE SÉCURITÉ

Ce symbole d'avertissement indique un danger. Vous vous trouvez dans une situation pouvant entraîner des blessures ou des dommages corporels. Avant de travailler sur un équipement, soyez conscient des dangers liés aux circuits électriques et familiarisez-vous avec les procédures couramment utilisées pour éviter les accidents. Pour prendre connaissance des traductions des avertissements figurant dans les consignes de sécurité traduites qui accompagnent cet appareil, référez-vous au numéro de l'instruction situé à la fin de chaque avertissement.

CONSERVEZ CES INFORMATIONS

Warnung

WICHTIGE SICHERHEITSHINWEISE

Dieses Warnsymbol bedeutet Gefahr. Sie befinden sich in einer Situation, die zu Verletzungen führen kann. Machen Sie sich vor der Arbeit mit Geräten mit den Gefahren elektrischer Schaltungen und den üblichen Verfahren zur Vorbeugung vor Unfällen vertraut. Suchen Sie mit der am Ende jeder Warnung angegebenen Anweisungsnummer nach der jeweiligen Übersetzung in den übersetzten Sicherheitshinweisen, die zusammen mit diesem Gerät ausgeliefert wurden.

BEWAHREN SIE DIESE HINWEISE GUT AUF.

Avvertenza

IMPORTANTI ISTRUZIONI SULLA SICUREZZA

Questo simbolo di avvertenza indica un pericolo. La situazione potrebbe causare infortuni alle persone. Prima di intervenire su qualsiasi apparecchiatura, occorre essere al corrente dei pericoli relativi ai circuiti elettrici e conoscere le procedure standard per la prevenzione di incidenti. Utilizzare il numero di istruzione presente alla fine di ciascuna avvertenza per individuare le traduzioni delle avvertenze riportate in questo documento.

CONSERVARE QUESTE ISTRUZIONI

Advarsel

VIKTIGE SIKKERHETSINSTRUKSJONER

Dette advarselssymbolet betyr fare. Du er i en situasjon som kan føre til skade på person. Før du begynner å arbeide med noe av utstyret, må du være oppmerksom på farene forbundet med elektriske kretser, og kjenne til standardprosedyrer for å forhindre ulykker. Bruk nummeret i slutten av hver advarsel for å finne oversettelsen i de oversatte sikkerhetsadvarslene som fulgte med denne enheten.

TA VARE PÅ DISSE INSTRUKSJONENE

Aviso

INSTRUÇÕES IMPORTANTES DE SEGURANÇA

Este símbolo de aviso significa perigo. Você está em uma situação que poderá ser causadora de lesões corporais. Antes de iniciar a utilização de qualquer equipamento, tenha conhecimento dos perigos envolvidos no manuseio de circuitos elétricos e familiarize-se com as práticas habituais de prevenção de acidentes. Utilize o número da instrução fornecido ao final de cada aviso para localizar sua tradução nos avisos de segurança traduzidos que acompanham este dispositivo.

GUARDE ESTAS INSTRUÇÕES

¡Advertencia!

INSTRUCCIONES IMPORTANTES DE SEGURIDAD

Este símbolo de aviso indica peligro. Existe riesgo para su integridad física. Antes de manipular cualquier equipo, considere los riesgos de la corriente eléctrica y familiarícese con los procedimientos estándar de prevención de accidentes. Al final de cada advertencia encontrará el número que le ayudará a encontrar el texto traducido en el apartado de traducciones que acompaña a este dispositivo.

GUARDE ESTAS INSTRUCCIONES

Varning!

VIKTIGA SÄKERHETSANVISNINGAR

Denna varningssignal signalerar fara. Du befinner dig i en situation som kan leda till personskada. Innan du utför arbete på någon utrustning måste du vara medveten om farorna med elkretsar och känna till vanliga förfaranden för att förebygga olyckor. Använd det nummer som finns i slutet av varje varning för att hitta dess översättning i de översatta säkerhetsvarningar som medföljer denna anordning.

SPARA DESSA ANVISNINGAR

Aviso

INSTRUÇÕES IMPORTANTES DE SEGURANÇA

Este símbolo de aviso significa perigo. Você se encontra em uma situação em que há risco de lesões corporais. Antes de trabalhar com qualquer equipamento, esteja ciente dos riscos que envolvem os circuitos elétricos e familiarize-se com as práticas padrão de prevenção de acidentes. Use o número da declaração fornecido ao final de cada aviso para localizar sua tradução nos avisos de segurança traduzidos que acompanham o dispositivo.

GUARDE ESTAS INSTRUÇÕES

Advarsel

VIGTIGE SIKKERHEDSANVISNINGER

Dette advarselssymbol betyder fare. Du befinder dig i en situation med risiko for legemesbeskadigelse. Før du begynder arbejde på udstyr, skal du være opmærksom på de involverede risici, der er ved elektriske kredsløb, og du skal sætte dig ind i standardprocedurer til undgåelse af ulykker. Brug erklæringsnummeret efter hver advarsel for at finde oversættelsen i de oversatte advarsler, der fulgte med denne enhed.

GEM DISSE ANVISNINGER

 



Related Documentation

For additional information that might be helpful when installing and configuring the Cisco SAMI in your Cisco 7600 Series Router, refer to the following:

Cisco Service and Application Module for IP Memory Upgrade Installation Note

Cisco 7600 Series Router platform:

Release Notes for Cisco IOS Release 12.2SR for the Cisco 7600 Series Routers

Cisco 7600 Series Router Installation Guide

Cisco 7600 Series Router Module Installation Guide

Cisco 7600 Series Router Cisco IOS Command Reference

Cisco 7600 Series Router Cisco IOS System Message Guide

For information about MIBs, refer to: http://www.cisco.com/public/sw-center/netmgmt/cmtk/mibs.shtml

These documents are available at:

Cisco 7600 Series Router home page on Cisco.com

Products & Solutions > Products > Routers and Routing Systems > 7600 Series Routers

Cisco 7600 Series Router technical documentation on Cisco.com

Products & Solutions > Products > Routers and Routing Systems > 7600 Series Routers > in the Technical Documentation & Tools box on the right of the page, Cisco 7600 Series Routers

Cisco mobile wireless software applications that are supported on the Cisco SAMI include:

Cisco Wireless Security Gateway

Cisco 7600 Wireless Security Gateway, Release 2.0 Configuration Guide (and above)

Release Notes for the Cisco 7600 Wireless Security Gateway, Release 2.0 (and above)

Cisco Broadband Wireless Gateway (formerly the Cisco ASN Gateway)

Cisco Broadband Wireless Gateway for IOS Release 12.4(15)XL1 (and above)

Cisco Broadband Wireless Gateway 1.1 Command Reference, IOS Release 12.4(15)XL1
(and above)

Cisco Content Services Gateway (2nd Generation CSG2)

Release Notes for Cisco Content Services Gateway - 2nd Generation

Cisco Content Services Gateway - 2nd Generation Installation and Configuration Guide

Cisco Gateway GPRS Support Node (GGSN)

Release Notes for Cisco GGSN Release 8.0 on the Cisco SAMI, Cisco IOS Release 12.4(15)XQ (and above)

Cisco GGSN Release 8.0 Configuration Guide, Cisco IOS Release 12.4(15)XQ (and above)

Cisco GGSN Release 8.0 Command Reference, Cisco IOS Release 12.4(15)XQ (and above)

Cisco Mobile Wireless Home Agent (HA)

Cisco Mobile Wireless Home Agent Feature for IOS 12.4(15)XM

Command Reference for Cisco Mobile Wireless Home Agent Feature for Cisco IOS Release 12.4(15)XM

Release Notes for the Cisco Mobile Wireless Home Agent Feature for Cisco IOS Release 12.4(15)XM

Cisco IP Transfer Point, Cisco IOS Release 12.2(25)IRA and above

http://www.cisco.com/en/US/products/sw/wirelssw/ps1862/products_feature_guides_list.html

Cisco Packet Data Serving Node (PDSN)

Cisco Packet Data Serving Node (PDSN) Release 3.5 for Cisco IOS Release 12.4(15)XN

Cisco PDSN Command Reference for IOS Release 12.4(15)XN

Obtaining Documentation, Obtaining Support, and Security Guidelines

For information on obtaining documentation, obtaining support, providing documentation feedback, security guidelines, and also recommended aliases and general Cisco documents, see the monthly What's New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:

http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html