Cisco Wireless LAN Controller System Message Guide
LIC_AGENT through LWAPP
Downloads: This chapterpdf (PDF - 784.0KB) The complete bookPDF (PDF - 15.88MB) | Feedback

LIC_AGENT Messages

Table Of Contents

LIC_AGENT Messages

LICENSE Messages

LICENSE_IMAGE_APPLICATION Messages

LOCP Messages

LOG Messages

LRADSIM Messages

LWAPP Messages


LIC_AGENT Messages

This section contains License Agent (LIC_AGENT) messages.

Error Message    %LIC_AGENT-3-MEMORY: [chars]  

Explanation    License Agent subsystem has experienced a problem gettting the required memory to complete this operation.

Recommended Action    Check system memory for other memory allocation errors and contact technical support for problem resolution. In the absence of IOS errors, upgrading the memory in the network device might be required.

Error Message    %LIC_AGENT-3-UNKNOWN_EVENT: event [dec], [chars]  

Explanation    License Agent tried to execute an unknown event. Contact technical support for problem resolution.

LICENSE Messages

This section contains license (LICENSE) messages.

Error Message    %LICENSE-3-AKC_MISMATCH: Generated key [chars] does not match with the 
user-configured key [chars]. Sw Key: [chars] 

Explanation    Generated key does not match with the user-configured key.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LICENSE-3-CARD_MODEL_INVALID: NEC license does not support the card 
model [hex]. 

Explanation    NEC license does not support a card model.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LICENSE-3-CHECKSUM_INCORRECT: NEC SKC [chars] checksum [chars] is 
incorrect. 

Explanation    NEC SKC has incorrect checksum.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LICENSE-6-DECODE_KEY_FAILED: Failed to decode the temporary key 
[chars]. 

Explanation    Failed to decode the temporary key.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LICENSE-3-FEATURE_ID_UNKNOWN:  NEC SKC [chars] has unknown feature 
field [chars]. 

Explanation    NEC SKC has unknown feature field.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LICENSE-3-FEATURE_MISMATCH: The feature [chars] in the SKC [chars] 
does not match the image 

Explanation    The feature in the SKC does not match the image

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LICENSE-0-FEATURE_TURNED_OFF: NEC key [chars] with feature [chars] 
has [chars]. AP features are off. 

Explanation    NEC key has expired or been deleted. AP features are off.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LICENSE-3-FILE_ACCESS_FAILED: Failed to access the compressed file 
[chars]. 

Explanation    Failed to access the compressed file.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LICENSE-3-FILE_INTEGRITY_FAILED: File integrity failed. 

Explanation    File integrity failed.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LICENSE-3-FILE_LEN_BIG: The length of the file [chars] is [int]. It 
is bigger than the maximum limit [int]. 

Explanation    The length of the file is bigger than the maximum size limit.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LICENSE-3-FILE_OPEN_FAILED: Failed to open the file [chars].Error: 
[chars]. 

Explanation    Failed to open a file.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LICENSE-3-FILE_READ_FAILED: Failed to read the file [chars].Error: 
[chars]. 

Explanation    Failed to read a file.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LICENSE-3-FILE_RETRIEVE_FAILED: Failed to retrieve the file [chars] 
from NV memory. 

Explanation    Failed to retrieve file from NV memory.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LICENSE-3-FILE_SIZE_MISMATCH: Actual size of the file [chars] ([dec] 
bytes) mismatches with the size retrieved using fstat ([dec] bytes). 

Explanation    Actual size of the file mismatches with the size retrieved using fstat.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LICENSE-3-FILE_WRITE_FAILED: Failed to write the config file [chars] 
into NV Memory. 

Explanation    Failed to write the license config file into NV Memory.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LICENSE-3-FSTAT_FAILED: Failed to obtain the status of the file 
[chars].The fstat system call failed.Error: [chars]. 

Explanation    Failed to obtain the status of a file..

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LICENSE-3-GET_VER_FAILED: cannot get software release number. 

Explanation    cannot get software release number.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LICENSE-3-INVALID_VER_STR: The software release string [chars] is 
invalid.[chars]. 

Explanation    The software release string is invalid.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LICENSE-3-KEY_EXPIRED: NEC key [chars] with feature [chars] has 
[chars]. 

Explanation    NEC key has expired or been deleted.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LICENSE-3-KEY_GEN_FAILED: Generating the license key failed. serial 
<[chars]> product <[dec]> sw release<[dec].[dec].[dec].[dec]> swrelease length 
[dec]. 

Explanation    Generating the license key failed.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LICENSE-3-KEY_ISSUER_INVALID: The SKC key is neither temporary nor 
production key.It is rejected. 

Explanation    The SKC key is neither temporary nor production key.It is rejected.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LICENSE-3-KEY_LEN_INVALID: [chars] [chars] has invalid length [dec]. 

Explanation    Key Code has invalid length.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LICENSE-4-LIC_AGENT_OFF: License Agent is turned off. UDI=[chars]  

Explanation    The License Agent on this device is not running

Recommended Action    Check the device configuration. Enable License Agent.

Error Message    %LICENSE-3-LICENSE_INTEGRITY_FAILED: License integrity failed. 

Explanation    License integrity failed.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LICENSE-0-LICENSE_KEY_MISMATCH: Image and NEC license key mismatch. 
All AP functionalities are disabled. 

Explanation    Image and NEC license key mismatch. All AP functionalities are disabled.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LICENSE-3-MEM_ALLOC_FAILED: Failed to allocate memory of [dec] bytes. 

Explanation    Failed to allocate memory.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LICENSE-4-NEC_KEY_DROPPED: No memory to add NEC key [chars]; user 
should delete a key. 

Explanation    No memory to add NEC key ; user should delete a key.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LICENSE-3-PROD_ID_MISMATCH: ProdSeries(hw=[chars] sw=[chars]) or 
ProdID(hw=[chars] sw=[chars]) mismatch between hw and sw keys (SKC=[chars]) 

Explanation    The hardware and software keys do not match.This could be because the product series or the product Ids for the keys do not match.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LICENSE-7-READ_LICENSE_FILE: Reading the license file [chars].Serial 
No: [chars].Product : [dec]. sw release:[dec].[dec].[dec].[dec].sw release length 
[dec]. 

Explanation    Reading the license file.

Recommended Action    No action is required.

Error Message    %LICENSE-7-REBUILDING_CFG_FILE: Rebuilding the default configuration 
for '[chars]' 

Explanation    Rebuilding the default license configuration file.

Recommended Action    No action is required.

Error Message    %LICENSE-3-SAVE_TMPKEY_FAILED: Failed to save the NEC temp key [chars] 
into config file, and clearing it from the running config.Return code [dec]. 

Explanation    Failed to save the NEC temp key into config file, and clearing it from the running config.

Recommended Action    No action is required.

Error Message    %LICENSE-0-SEM_CREAT_FAILED: Failed to create license semaphore. 

Explanation    Failed to create license semaphore.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LICENSE-0-TEMP_KEY_EXPIRED: NEC temporary key [chars] expired. 

Explanation    NEC temporary key expired.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LICENSE-3-TIMER_CREAT_FAILED: Failed to create a NEC license timer. 

Explanation    Failed to create a NEC license timer.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LICENSE-3-TIMER_START_FAILED: Failed to start the NEC license timer. 

Explanation    Failed to start the NEC license timer.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LICENSE-3-TMP_KEY_REUSED: Rejected NEC key [chars] configuration. 
Re-use of the same temporary key is not allowed. 

Explanation    Rejected NEC key configuration. Re-use of the same temporary key is not allowed.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

LICENSE_IMAGE_APPLICATION Messages

This section contains Licensing Image Application (LICENSE_IMAGE_APPLICATION) messages.

Error Message    %LICENSE_IMAGE_APPLICATION-3-FAILED: [chars], rc = [dec]  

Explanation    The licensing subsystem failed to create a process/watched boolean to watch request from the remote show subsys license commands.

Recommended Action    Capture the error msg and forward it to the appropriate licensing component.

Error Message    %LICENSE_IMAGE_APPLICATION-6-LICENSE_LEVEL: Module name = [chars] Next 
reboot level = [chars] and License = [chars]  

Explanation    This is an informational message to display the change in the next reboot license level.

Recommended Action    No action is required.

Error Message    %LICENSE_IMAGE_APPLICATION-6-LICENSE_LEVEL_CONFIG: Please issue 
'license boot' config command to make extension license ([chars]) available for 
use.  

Explanation    This is an informational message to inform the user to make the extension license available to support the image level.

Recommended Action    Configure the licensing image level.

Error Message    %LICENSE_IMAGE_APPLICATION-6-NO_LICENSE: [chars] [chars].  

Explanation    There is no valid license available on this device.

Recommended Action    Purchase a license to activate required features .

Error Message    %LICENSE_IMAGE_APPLICATION-3-UNKNOWN_EVENT: [chars]  

Explanation    The image licensing subsystem received an event that it does not understand or recognize.

Recommended Action    Capture the error message and forward it to the appropriate licensing component .

Error Message    %LICENSE_IMAGE_APPLICATION-3-UNKNOWN_VERSION: [chars]  

Explanation    The image licensing subsystem received an event for an unknown version of a feature.

Recommended Action    Capture the error message and forward it to the appropriate licensing component.

LOCP Messages

This section contains Location Protocol (LOCP) messages.

Error Message    %LOCP-3-CERT_AAA_ERR: LOCP: LBS cert AAA Error for [chars] 

Explanation    LOCP: Controller LBS-SSC AuthList failed to validate certificate

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LOCP-3-INIT_FAIL: LOCP Task failed to initialize 

Explanation    LOCP Receive task failed to initialize and cannot accept incoming LOCP messages

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LOCP-3-INV_CERT_LEN: LOCP: Received invalid peer cert (size [int]) 

Explanation    Received peer certificate that contains no cert or is too big

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LOCP-3-PEER_CERT_VER_FAIL: LOCP: LBS cert verification failed check 

Explanation    LOCP: Controller failed to validate the LBS peer certificate

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

LOG Messages

This section contains log (LOG) messages.

Error Message    %LOG-3-CRASH_FILE_CREAT_FAIL: Unable to recreate the crash file 

Explanation    Unable to recreate the crash file

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LOG-3-FILE_OPEN_FAIL: Unable to open crash file [chars]. Error: 
[chars] 

Explanation    Unable to open the specified crash file

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LOG-3-FILE_WRITE_FAIL: Error on call to osapiFsWrite routine on 
config file [chars]. 

Explanation    Failed to write the config file for the LOG sub-system.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LOG-7-SERVICE_STARTED: syslog services started! 

Explanation    syslog services started!

Recommended Action    No action is required.

LRADSIM Messages

This section contains LWAPP Radio Access Device Simulator (LRADSIM) messages.

Error Message    %LRADSIM-3-AUTHREQFAIL: Unable to send authenticate message. 

Explanation    Failed to encapsulate the header in the authentication message.

Recommended Action    This is a debug message only. No action is required.

Error Message    %LRADSIM-3-INTMACFAIL: Unable to retrieve the interface MAC address. 

Explanation    Trying to retrieve the Mac address of a unplugged interface or the interface index exceeds the maximum supported interface.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LRADSIM-3-INVDADDR: Invalid destination address provided. 

Explanation    Trying to use an invalid ip address.

Recommended Action    This is a debug message only. No action is required.

Error Message    %LRADSIM-3-INVMS: Invalid mobile identifier provided. 

Explanation    Trying to use invalid Ap for a mobile station.

Recommended Action    This is a debug message only. No action is required.

Error Message    %LRADSIM-3-INVPARAM: Invalid parameters provided to 
sendDiscoveryRequest. 

Explanation    A bad destination address or a invalid port no was specified as parameter to sendDiscoveryRequest.

Recommended Action    This is a debug message only. No action is required.

Error Message    %LRADSIM-3-INVRCB: Invalid control block identifier provided. 

Explanation    Trying find out a invalid or non existence control block in the list.

Recommended Action    No action is required.

Error Message    %LRADSIM-3-LRADINITFAIL: Unable to create the control block. 

Explanation    Unable to get a lock for the control block or trying to corrupt the DB with a invalid control block.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LRADSIM-3-MSAUTHFAILED: Sending Auth Request for mobile [dec] on AP 
[dec]failed. 

Explanation    Trying to associate a mobile station on a non existance Ap.

Recommended Action    No action is required.

Error Message    %LRADSIM-3-MSDISFAIL: Sending Discovery Request for mobile [dec] 
failed. 

Explanation    This might be because of invalid parameter passed to discovery request.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LRADSIM-3-MSLISTFAIL: Failed to initialize the mobile station list. 

Explanation    Unable to create a lock for the mobile station list. This occurs when the system memory is full.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LRADSIM-3-NOINTFOUND: Unable to determine the number of interfaces in 
the system. 

Explanation    Unable to detect the number of active interface present in the system.

Recommended Action    This is a debug message only. No action is required.

Error Message    %LRADSIM-3-RCBMISMATCH: No active control block found for the ap Id 
[dec] Auth req can not besent for mobile Id [dec] 

Explanation    No active control block found for the ap and Auth req can not besent for the mobile station

Recommended Action    No action is required.

Error Message    %LRADSIM-3-SYSMEMFULL: Out of System buffers. 

Explanation    The system memory is full.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

LWAPP Messages

This section contains Lightweight Access Point Protocol (LWAPP) messages.

Error Message    %LWAPP-3-AAA_ERR: Could not send AP authorization request 

Explanation    Due to an error in the internal state of the AP, AP authorization request could not be sent. AP may not be able to join the controller.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-AAA_ERR2: Invalid AAA state ('[chars]') for AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    AP could not join the controller due to an internal error.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-ADD_OSSID_ERR: Unable to add [chars] SSID to override table 
for AP [chars] 

Explanation    Due to an internal error, override SSID information was not added into the database. Override SSID functionality may not work as expected.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-AKITA_ERR: AP ([hex]:[hex]:[hex]:[hex]:[hex]:[hex]) is not 
supported 

Explanation    This version of the controller software does not support the AP.

Recommended Action    Obtain the right version of the software that supports the AP if you want this AP in the network.

Error Message    %LWAPP-3-APEVTLOGDNLDERR: Failed to download event log from AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex]. [chars]  

Explanation    The controller was unable to download the event log from the specified remote AP. The exact reason of failure is also in the message.

Recommended Action    Identify the reason for failure from the message.

Error Message    %LWAPP-1-AP_CONTAINED: AP [chars] is being contained on slot [dec] 

Explanation    The specified AP has either been detected as a rogue and is therefore being contained.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-AP_DB_CREATE_ERR: Unable to create an entry for AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] in the database - [chars] 

Explanation    Could not add AP into entry into the internal database.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-AP_DB_DELETE_ERR1: Could not delete AP entry , invalid ID 
(x[hex]) 

Explanation    Deleting the AP from the internal database failed because the entry for the AP could not be found. It is possible that the AP has been removed from the controller.

Recommended Action    Use the 'show ap summary' command to determine if the AP is still joined to the controller. If it is not, the message may be ignored. If it is still joined, restart the AP to ensure that it has the latest configuration and contact technical assistance if the problem recurs.

Error Message    %LWAPP-3-AP_DB_DELETE_ERR2: Unable to remove AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] [chars] 

Explanation    Due to an internal error, deleting the AP entry from the network processor failed. If the AP attempts to join this controller, it may not function as expected.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-AP_DB_ERR1: Unable to find AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] entry in the database, could not process 
[chars] 

Explanation    The operation being performed for the AP failed because the internal entry for the AP was not found. It is possible that the AP has been removed from the controller.

Recommended Action    Use the 'show ap summary' command to determine if the AP is still joined to the controller. If it is not, the message may be ignored. If it is still joined, restart the AP to ensure that it has the latest configuration and contact technical assistance if the problem recurs.

Error Message    %LWAPP-3-AP_DB_ERR2: Unable to find AP (id [int]) in the database, 
[chars] 

Explanation    The operation being performed for the AP failed because the internal entry for the AP was not found. It is possible that the AP has been removed from the controller.

Recommended Action    Use the 'show ap summary' command to determine if the AP is still joined to the controller. If it is not, the message may be ignored. If it is still joined, restart the AP to ensure that it has the latest configuration and contact technical assistance if the problem recurs.

Error Message    %LWAPP-3-AP_DB_FULL: Could not allocate an entry for the AP, database 
is full 

Explanation    Internal database for AP is full, therefore an entry for the AP could not be added. The AP will not be able to join the controller.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-AP_DBG: Could not execute debug command, command is too long; 
AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Remote debug command of the given length is not supported, if possible, execute an alternative command.

Recommended Action    No action is required.

Error Message    %LWAPP-3-AP_DB_INVALID: AP information in the database is invalid 

Explanation    An invalid AP entry was found in the AP database. If the AP is still joined to the controller - it may not function properly.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-4-AP_JDBG_ADD_FAILED: Unable to create AP Join information 
entry for AP:[hex]:[hex]:[hex]:[hex]:[hex][hex], [chars] 

Explanation    AP join information could not be added to the debugging database for the indicated reason. Debugging logs may be incomplete

Recommended Action    If the AP join information entry could not be created because the controller is already maintaining maximum number of entries supported on the particular controller platform, the message should be ignored till the time the controller is rebooted next. This controller will not record any AP join information for any new AP deployed till the next reboot. For all other reason specified, copy the message as it is and contact technical assistance.

Error Message    %LWAPP-4-AP_JDBG_INIT_FAILED: Unable to initialize AP join debugging 
infrastructure ([chars]) 

Explanation    This AP join debugging infrastructure could not be initialized for the specified number of APs to be supported. The exact reason for failure is specified in the message. Ability to debug AP join issues is limited.

Recommended Action    No action is required.

Error Message    %LWAPP-4-AP_JDBG_INVALID_DATA: Invalid AP join debugging data detected 
([chars]) 

Explanation    An internal error occurred when initializing AP join information for debugging. Ability to debug AP join issues is limited.

Recommended Action    No action is required.

Error Message    %LWAPP-3-AP_LOCK_ERR: Could not obtain exclusive access to AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] in the database 

Explanation    Access to internal AP database failed. AP may not function as expected.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-4-AP_LOG_HOST_CFG_ERR: Unable to set system logging host 
configuration for AP:[hex]:[hex]:[hex]:[hex]:[hex][hex] 

Explanation    The controller could not configure system logging configuration for an AP. The AP may no longer be joined to a controller.

Recommended Action    No action is required.

Error Message    %LWAPP-6-AP_MODEL: [int] APs supported on platform ([chars])  

Explanation    Informational message that logs how the number of supported APs is being determined.

Recommended Action    No action is required.

Error Message    %LWAPP-2-AP_MODEL_ERR: Could not determine the # of APs supported from 
the model string ([chars]) 

Explanation    Unable to find the number of APs supported from machine model string. The system may become unstable.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-6-AP_NOT_CONTAINED: AP [chars] is not being contained on slot 
[dec] 

Explanation    The specified AP has been detected as not a rogue, so it is not being contained.

Recommended Action    No action is required.

Error Message    %LWAPP-3-AP_POWER_ERR: AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex] is 
unable to verify sufficient in-line power, radio slot [dec] is disabled 

Explanation    AP power is not within requirements, the radio slot has been disabled.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-6-AP_POWER_OK: AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex] has 
verified sufficient in-line power, radio slot [dec] re-enabled 

Explanation    AP power is within requirements, the radio slot has been enabled.

Recommended Action    No action is required.

Error Message    %LWAPP-3-AP_REG_ERR: Could not register for AP state notification, 
maximum limit reached 

Explanation    An internal table that is used to pass state change notifications between processes is full. Configuration and state change information will not be handled properly and APs may not function as expected.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-AP_TYPE_ERR: AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex] is not an 
H-REAP AP, could not process RADIUS configuration payload 

Explanation    Radius configuration is only permitted for an H-REAP AP.

Recommended Action    Check whether the AP is an H-REAP AP, if not try to configure the AP in H-REAP mode - if possible to enable RADIUS configuration.

Error Message    %LWAPP-3-ARP_ERR: Could not resolve ARP of sniffer server IP address 
([chars]), disabling sniffing on AP [chars], slot [dec] 

Explanation    ARP resolution for the sniffer server failed due to which sniffing was disabled.

Recommended Action    Check the network configuration and also the configuration of the server IP address on the controller. Ensure that the server is reachable.

Error Message    %LWAPP-3-BAND_ERR: Invalid band parameter for AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Traffic stream metrics status could not be sent to the specified AP due to an internal error. Traffic stream metrics may not function as expected.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-1-BIG_NAV: Big Nav attack detected on AP [chars], slot [dec], 
channel [dec], (errors [dec]) 

Explanation    NAV attack detected on the specified AP.

Recommended Action    Check for a NAV attack in the network.

Error Message    %LWAPP-3-BUILD_STR_ERR: [chars] 

Explanation    Due to an internal error, software version information of the controller could not be obtained. AP may not be able to join the controller.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-CCX_LINKTEST_ERR: Received unexpected CCX Linktest report 
message from AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Dropping the unexpected CCX Linktest report message from the AP.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-CCX_RM_ERR: Received an invalid CCX resource management 
subtype payload (radio management state [dec], slot identifier [dec]) 

Explanation    Radio resource management message was not processed due to invalid parameter. CCX radio resource management may not function as expected.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-CERT_ERR1: Error verifying AP certificate, [chars] 

Explanation    Due to an internal error while processing AP's certificate, join request dropped.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-CERT_ERR2: Unable to retrieve controller's certificate for AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    An internal error occurred while obtaining controller's certificate.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-CERT_ERR4: Unable to read the controller MAC address from the 
certificate 

Explanation    An internal error occurred while reading MAC address of the controller from the certificate.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-CFG_ERR: Could not save LWAPP configuration in file [chars] 

Explanation    An error occurred when copying an LWAPP config file to persistent storage. Some LWAPP configuration may be lost and system may not behave as expected.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-CHKSUM_ERR: Invalid checksum in data transfer payload from AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] (opcode [dec]) 

Explanation    Due to an error in the checksum, message from the AP is dropped. The requested information from the AP could not be obtained.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-6-CONSOLE_LOGIN: Console login success on AP [chars] 

Explanation    A login attempt on the AP's console was successful.

Recommended Action    No action is required.

Error Message    %LWAPP-3-CONSOLE_LOGIN_ERR1: Console login failure on AP [chars] 

Explanation    A login attempt on the AP's console was unsuccessful.

Recommended Action    Someone tried to log into the AP's console but authentication failed. If this message is seen multiple times check if someone is attempting to forcibly log into the AP's console.

Error Message    %LWAPP-3-CONSOLE_LOGIN_ERR2: Unknown AP console login alarm from the 
AP [chars] 

Explanation    AP sent console login alarm that the controller could not understand.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-COUNT_ERR1: AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex] marked as 
[chars] but internal counter is zero 

Explanation    Due to an error, information on the type of AP is corrupted. AP may not function as expected.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-COUNT_ERR2: AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex] type 
count flag is not set 

Explanation    Due to an error, information on the type of AP is corrupted. AP may not function as expected.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-COUNT_ERR3: Mismatch in the internal count (used entries 
[dec], normal [dec], mesh [dec]) 

Explanation    Due to an error, information on the type of AP is corrupted. AP may not function as expected.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-COUNT_ERR4: AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex] marked as 
normal but internal counter does not reflect this 

Explanation    Due to an error, information on the type of AP is corrupted. AP may not function as expected.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-CRYPTO_ERR1: Unable to encrypt crypto payload with public key 
for message to AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    An internal error occurred while encrypting message to AP. If AP is already connected to the controller, it may be disconnected. If not, it may not be able to join the controller.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-CRYPTO_ERR2: Unable to encrypt crypto payload with private 
key for message to AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    An internal error occurred while encrypting message to AP. If AP is already connected to the controller, it may be disconnected. If not, it may not be able to join the controller.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-DECODE_ERR: Error decoding [chars] from AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    The LWAPP message sent by the AP was not understood by the controller, the message was dropped. AP may not function as expected.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-DECRYPT_ERR: Unable to decrypt [chars]; AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Decryption of LWAPP message failed, the message was dropped. AP may not function as expected.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-DECRYPT_ERR1: Invalid session identifier ([dec]) - unable to 
decrypt packet; AP:[hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Due to an internal error, decryption of the LWAPP message on the controller failed and the message was dropped. AP may not function as expected.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-DECRYPT_ERR2: Error decrypting public key in key update 
response from AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Rekeying could fail because decrypting with public key failed. AP may not function as expected.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-DECRYPT_ERR3: Private key decryption failed in key update 
response from AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Rekeying could fail because decrypting with private key failed. AP may not function as expected.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-DECRYPT_ERR5: Error decrypting packet (using old key) from AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] (session identifier [hex]) 

Explanation    Due to an internal error, LWAPP packet could not be decrypted. AP may not function as expected.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-DECRYPT_ERR8: Authentication of packet from AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] failed, packet will be dropped 

Explanation    LWAPP message from the AP was dropped because of authentication failure which led to error in decryption. AP may not function as expected.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-DECRYPT_ERR9: Unable to decrypt packet from AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] with the private key 

Explanation    Due to an internal error, decrypting the LWAPP message with private key failed. AP may not function as expected.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-DISC_AP_MGR_CAP: Ignoring discovery request from AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] - no AP manager found with spare capacity 

Explanation    No AP manager was found with capacity to handle another AP, so the discovery request from an AP was not accepted. The AP will continue to search for an available controller.

Recommended Action    Verify the AP manager interface configuration. If the configuration is correct, the maximum number of supported APs has probably been reached.

Error Message    %LWAPP-3-DISC_AP_MGR_ERR1: Unable to process primary discovery request 
from AP on interface ([int]), VLAN ([int]), could not get AP manager 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    A discovery response could not be sent to an AP because the controller was not able to obtain the IP address of the AP manager interface

Recommended Action    Correct the AP manager interface configuration.

Error Message    %LWAPP-3-DISC_AP_MGR_ERR2: Unable to process primary discovery request 
from AP, AP manager IP address is invalid [hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    A discovery response could not be sent to an AP because the controller was not able to obtain the IP address of the AP manager interface

Recommended Action    Correct the AP manager interface configuration.

Error Message    %LWAPP-3-DISC_BCAST_ERR: Ignoring a discovery request from AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] via broadcast AP (IP = 
[dec].[dec].[dec].[dec]) is not in the same subnet as the controller 

Explanation    The controller ignored a broadcast discovery request from an AP because AP is not on the same subnet as the controller.

Recommended Action    No action is required.

Error Message    %LWAPP-3-DISC_INTF_ERR1: Ignoring discovery request received on 
non-management interface ([int]) in L3 LWAPP mode 

Explanation    A discovery request from an AP was ignored because it was received on an invalid interface. Network configuration may be invalid.

Recommended Action    Check network configuration to ensure that packets from the AP are correctly routed.

Error Message    %LWAPP-3-DISC_INTF_ERR2: Ignoring discovery request received on a 
wrong VLAN ([dec]) on interface ([int]) in L3 LWAPP mode 

Explanation    A discovery request from an AP was ignored because it was received on an invalid interface. Network configuration may be invalid.

Recommended Action    Check network configuration to ensure that packets from the AP are correctly routed.

Error Message    %LWAPP-3-DISC_INTF_STATE_ERR: Unable to get [chars] state of interface 
'[chars]' (port [int]), not returning interface in discovery response 

Explanation    An internal error occurred when obtaining the administrative state of the interface, so this was not sent in the discovery response. AP will not be able to send a join request to that interface.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-0-DISC_LEN_ERR1: Invalid discovery request received from AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] - message length ([int]) is invalid 

Explanation    An incorrectly formatted discovery request was received from an AP and was ignored. The AP may not be able to join a controller.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-0-DISC_LEN_ERR2: Invalid primary discovery request received 
from AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex] - message length ([int]) is invalid 

Explanation    An incorrectly formatted primary discovery request was received from an AP and was ignored. The AP may not be able to join a controller.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-DISC_MAX_AP1: Dropping discovery request from AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] - limit for maximum APs supported [dec] 
reached 

Explanation    System's maximum limit on the number of supported APs has been reached, so this AP will not be serviced.

Recommended Action    No action is required.

Error Message    %LWAPP-3-DISC_MAX_AP2: Dropping primary discovery request from AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] - maximum APs joined [dec]/[dec] 

Explanation    System's maximum limit on the number of supported APs has been reached, so this AP will not be serviced.

Recommended Action    No action is required.

Error Message    %LWAPP-3-DISC_MAX_DOWNLOAD: Ignoring discovery request from AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] - maximum number of downloads ([int]) 
exceeded 

Explanation    A discovery request from an AP was rejected because the maximum number of concurrent downloads are already in progress. The AP may successfully join the controller on a later attempt.

Recommended Action    No action is required.

Error Message    %LWAPP-3-DISC_MAX_JOIN: Rejecting discovery request from AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] - maximum AP joins ([int]) exceeded 

Explanation    A discovery request from an AP was rejected because the maximum number of concurrent joins are already in progress. The AP may successfully join the controller on a later attempt.

Recommended Action    No action is required.

Error Message    %LWAPP-3-DISC_OTAP_ERR: Ignoring OTAP discovery request from AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex], OTAP is disabled 

Explanation    Controller received discovery request from an AP that learnt the controller's address over the air, but Over The Air Provisioning (OTAP) is disabled on the controller.

Recommended Action    Enable OTAP on the controller if desired, otherwise this message can be ignored.

Error Message    %LWAPP-6-DISC_RESPONSE_SENT: Discovery Response sent successfully to 
AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex]  

Explanation    Discovery Response sent succesfully to AP.

Recommended Action    No action is required.

Error Message    %LWAPP-4-DISC_TIME_ERR: Unable to retrieve time information while 
processing discovery request from AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Due to an internal error, the time at which the AP discovery request was received was not recorded. The AP may join the controller and function normally but monitoring of the AP's presence or absence may not work as expected.

Recommended Action    No action is required.

Error Message    %LWAPP-3-DISC_TYPE_ERR: Ignoring LWAPP packet from AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] - LWAPP packet is not a discovery or a join 
request (type = [dec]) and session ID is zero 

Explanation    An invalid LWAPP message was received from an AP and was ignored. This may affect the proper operation of the AP.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-DISC_VLAN_ERR: Received a discovery request from AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] on an unsupported VLAN ([int]), dropping the 
request 

Explanation    Discovery request was received on a port on which no interface was created.

Recommended Action    Check network configuration to ensure that packets from the AP are correctly routed.

Error Message    %LWAPP-3-DISK_ERR: Not enough disk space to store crash file from AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    An internal error has occurred while attempting to store crash information from the AP to persistent storage.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-DSCP_ERR: Could not get configured DSCP map for AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Due to an internal error in obtaining DSCP information for the specified AP, enterprise to enterprise DSCP functionality may not work as expected.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-DUP_AP_IP: Duplicate IP address detected for AP [chars], IP 
address of AP  [chars], this is a duplicate of IP on another machine (MAC address 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex]) 

Explanation    A duplicate IP address detected for the specified AP.

Recommended Action    Check the DHCP configuration and also change the IP address of the AP if it was configured statically.

Error Message    %LWAPP-3-DUP_ERR: Received a duplicate [chars] from AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    A duplicate request for key update was received from the AP, it is possible that the link between the AP and the controller is slow.

Recommended Action    No action is required.

Error Message    %LWAPP-3-DUP_IP: Adding client [hex]:[hex]:[hex]:[hex]:[hex]:[hex] to 
exclusion list due to IP Address conflict with AP '[chars]' 

Explanation    AP and client have the same IP address, client was black listed.

Recommended Action    Check the DHCP configuration and also change the IP address of the AP if it was configured statically.

Error Message    %LWAPP-3-ECHO_ERR: Did not receive heartbeat reply; AP: 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Controller did not get a response for the AP heartbeat message. There may be connectivity issues between the AP and the controller.

Recommended Action    Check if the AP has rebooted or if it has been removed from the network, or if there are connectivity issues between the AP and the controller.

Error Message    %LWAPP-3-ENCRYPT_ERR: Encryption of [chars] failed; AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Could not transmit the LWAPP message as it could not be encrypted. AP may not function as expected.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-ENCRYPT_ERR2: Unable to encrypt payload to AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] with public key 

Explanation    Due to an internal error, encryption of the crypto payload with the public key failed. This could lead to failures in rekeying and also sending the join response.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-ENCRYPT_ERR3: Unable to encrypt payload to AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] with the private key 

Explanation    Due to an internal error, encryption of the crypto payload with the private key failed. This could lead to failures in rekeying and also sending the join response.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-FILE_ERR: Unable to open [chars] file for AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    An internal error has occurred while attempting to store crash information from the AP to persistent storage. AP crash information may be lost.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-FILE_ERR1: Unable to obtain LWAPP parameters, error opening 
file [chars] 

Explanation    An internal error occurred when retrieving LWAPP information from persistent storage. The system may become unstable.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-FILE_ERR3: [chars] [hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Due to an internal error, invalid file name was received because of which the controller could not send a message to the AP for obtaining the specified information.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-FILE_ERR4: Internal file error while processing image data 
payload message from AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Due to an internal error, AP's image information could not be obtained. Firmware download to the AP may fail.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-FILE_ERR5: File could not be opened to store [chars] 
information from AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Due to an internal error, data from the AP could not be stored in persistent memory. Some information related to the AP may be lost.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-FILE_ERR6: Unable to write [chars] information from AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] into local file 

Explanation    Due to an internal error, data from the AP could not be stored in persistent memory. Some information related to the AP may be lost.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-HDR_ENCAP_ERR: Unable to encapsulate LWAPP header for 
[chars]; AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Could not send the LWAPP packet due to an internal error in encapsulating the packet. AP may not function as expected.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-HDR_ERR: Received LWAPP packet with unsupported bit field 
([hex],[hex]) from [hex]:[hex]:[hex]:[hex]:[hex]:[hex] to 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex], dropping the packet 

Explanation    An invalid LWAPP packet was received, the packet was dropped.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-HDR_ERR2: LWAPP header translation failed, dropping the 
packet 

Explanation    An internal error occurred when processing an LWAPP control packet, the LWAPP header was not understood, the packet was dropped.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-HDR_ERR3: Failed parsing LWAPP 

Explanation    Due to an internal error LWAPP header processing failed. The packet was dropped.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-HDR_PARSE_ERR: LWAPP header parsing failed, dropping the 
packet 

Explanation    Processing of an LWAPP control packet from the AP failed because the LWAPP header was not understood. AP may not function as expected.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-HREAP_ERR: Received invalid H-REAP operation for AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] while processing RADIUS configuration payload 
(flag [hex]) 

Explanation    Due to an internal error, RADIUS configuration could not be updated on the specified AP.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-HREAP_ERR2: Received invalid RADIUS port number (AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex]) while processing RADIUS configuration 
payload 

Explanation    Due to an invalid port number, RADIUS configuration could not be updated on the specified AP.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-IMAGE_DOWNLOAD_ERR: Refusing [chars] from AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] - controller image upgrade is in process 

Explanation    The specified request from the AP is ignored because controller's software is being upgraded. Future attempts from the AP may succeed.

Recommended Action    No action is required.

Error Message    %LWAPP-3-IMAGE_DOWNLOAD_ERR2: Refusing image download request from AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] - max downloads ([dec]) in progress 

Explanation    Ignoring the image download request from the AP as the maximum number of concurrent image download requests are in progress. This is a temporary condition, future attempts by the AP may succeed.

Recommended Action    No action is required.

Error Message    %LWAPP-3-IMAGE_DOWNLOAD_ERR3: Refusing image download request from AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] - unable to open image file [chars] 

Explanation    Due to an internal error, image for the AP requesting image download could not be obtained. AP image download will fail.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-IMAGE_DOWNLOAD_ERR4: Refusing image download request from AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] - unable to open MD5 file [chars] 

Explanation    Due to an internal error, image for the AP requesting image download could not be obtained. AP image download will fail.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-INDEX_ERR: Invalid index ([int]) while [chars] per port AP 
load information 

Explanation    An internal error occurred when processing AP load information. Some AP management functions may not work as expected.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-INVALID_AID: Received invalid association identifier ([int]) 
for station [hex]:[hex]:[hex]:[hex]:[hex]:[hex] on a REAP AP 

Explanation    An internal error caused an invalid association ID to be received from an AP for the indicated client. The client may experience communication problems.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-INVALID_AID2: Association identifier [int] for client 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] is already in use by 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    An internal error caused an invalid association ID to be received from an AP for the indicated client. The client may experience communication problems.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-INVALID_DELIM: Invalid delimiter ([dec]) in AP authorization 
list 

Explanation    Due to an invalid delimiter specified, AP could not be authenticated, therefore join response could not be sent.

Recommended Action    Check the delimiter configured on the controller.

Error Message    %LWAPP-3-INVALID_IP: Invalid sniffer server IP address ([hex]), 
disabling sniffing on AP [chars], slot  [dec] 

Explanation    Sniffing was disabled as the IP address of the server was invalid.

Recommended Action    Check the configuration of the sniffer server's IP address.

Error Message    %LWAPP-3-INVALID_PARAMETER: Invalid [chars]; AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    The specified parameter was not understood by the controller, the message was not processed. AP may not function as expected.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-INVALID_PARAMETER1: [chars] ([dec]); AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    The value of parameter specified was not understood by the controller, the message was not processed. AP may not function as expected.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-INVALID_PARAMETER2: [chars] ([dec]) - [chars]; AP: 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    The value of parameter specified was not understood by the controller, the message was not processed. AP may not function as expected.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-INVALID_PARAMETER3: [chars] ([dec]) 

Explanation    The value of parameter specified was not understood by the controller, the message was not processed.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-INVALID_PARAMETER4: [chars] 

Explanation    The value of parameter specified was not understood by the controller, the message was not processed.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-INVALID_RADIO: Received an unsupported radio ([dec]), [chars] 

Explanation    Performing the specified operation on the radio for the AP failed as the radio was not understood by the controller. AP may not function as expected.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-INVALID_RADIO2: Received invalid radio type ([dec]) for AP 
[chars] on slot [dec] , could not verify power level for the AP 

Explanation    Due to an internal error, an invalid radio type was received. The specified operation could not be performed.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-INVALID_SESSIONID: Received invalid session identifier in 
[chars] from AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex] (expected [dec] and got [dec]) 

Explanation    Mismatch in session identifier in the message from AP, message was dropped.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-INVALID_SLOT: Invalid slot identifier ([dec]) - [chars]; AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    The slot identifier sent by the AP was not understood by the controller, the specified message was not processed. AP may not function as expected.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-INVALID_SLOT2: Invalid slot identifier ([dec]) -  [chars] 
([dec]): AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    The slot identifier for the AP was not understood by the controller, the specified message was not processed. AP may not function as expected.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-INVALID_WLAN: Invalid WLAN identifier ([int]) obtained while 
building MFP config payload 

Explanation    An internal error occurred when attempting to retrieve WLAN configuration. MFP may not be operational or may not work as expected.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-IP_ERR: Could not plumb AP's 
([hex]:[hex]:[hex]:[hex]:[hex]:[hex]) IP address ([dec].[dec].[dec].[dec]), next 
hop MAC ([hex]:[hex]:[hex]:[hex]:[hex]:[hex]) and VLAN ([dec]) to fast path 

Explanation    Due to an internal error, IP address of the AP could not be configured in the network processor. AP may not function as expected.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-IP_PROT_ERR: IP protocol ([dec]) in the received packet - from 
AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex] is not UDP, LWAPP packets are only UDP, 
dropping the packet 

Explanation    An invalid packet received from the AP was dropped.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-JOIN_AP_MGR_ERR1: Could not get IP address of AP manager 
interface, dropping join request from AP [hex]:[hex]:[hex]:[hex]:[hex][hex] 

Explanation    A join response could not be sent to an AP because the controller was not able to obtain the IP address of the AP manager interface

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-JOIN_AP_MGR_ERR2: Received a join request from AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] for someone else ([dec].[dec].[dec].[dec]), 
dropping the packet 

Explanation    Join request had a destination IP address that does not match any AP manager's IP address, so it was dropped.

Recommended Action    Check the network configuration and also the configuration of the AP manager on the controller and ensure that the packets from the AP are routed correctly.

Error Message    %LWAPP-3-JOIN_DB_ERR: Could not allocate an entry in the database for 
AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex] - dropping the join request (# of APs 
joined = [dec]) 

Explanation    An internal error has resulted in a failure while creating an entry for the AP in the database.

Recommended Action    Check if the number of APs that are currently joined to this controller is also the maximum limit.

Error Message    %LWAPP-3-JOIN_HIGH_PRIORITY_AP_ERR: Disconnecting AP [chars] since a 
higher priority AP with priority [dec] joined Max number of APs allowed [dec]  

Explanation    When AP join priority is enabled and the controller has the maximum numbers of APs connected, a low priority AP is disconnected when a high priority AP joins .

Recommended Action    No action is required.

Error Message    %LWAPP-3-JOIN_INTF_ERR1: Received a join request on an invalid 
interface ([dec]) from AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex], dropping the 
packet 

Explanation    IP address of the interface on which the join request was received could not be obtained.

Recommended Action    Check the interface configuration on the controller.

Error Message    %LWAPP-3-JOIN_INVALID_ERR1: Invalid [chars] in LWAPP join request from 
AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    AP sent a join request that was invalid because it lacked certain payloads, such requests are dropped at the controller. AP may not be able to join the controller.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-JOIN_INVALID_ERR2: Invalid [chars] ([dec]) in join request 
from AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    AP sent a join request that was invalid because lengths of certain payloads within the request were incorrect, such requests are dropped at the controller. AP may not be able to join the controller.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-JOIN_INVALID_SLOT: Join request from AP 
([hex]:[hex]:[hex]:[hex]:[hex]:[hex]) has invalid number of slots ([dec], instead 
of [dec]) , dropping the packet 

Explanation    The number of radios that the AP supports is invalid as per what is sent in the join request, join request was dropped.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-JOIN_MAC_ERR: Received a join request from AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] destined for 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] on port [int]/VLAN [int] - invalid 
destination MAC address, dropping the packet 

Explanation    Mac address in the join request was invalid, this request was dropped by the controller.

Recommended Action    Check the network configuration and ensure that the packets from the AP are routed correctly.

Error Message    %LWAPP-6-JOIN_MASTER: Controller is also configured as the master, AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Controller is also configured as the master controller, change the configuration of the controller to not being a master, if desired.

Recommended Action    No action is required.

Error Message    %LWAPP-3-JOIN_MAX_AP_ERR: Received a join request from AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] - reached limit for maximum APs [dec]/[dec], 
dropping the packet 

Explanation    Each controller has a limit to the number of APs that can be supported, this limit has been reached, so the AP was not serviced.

Recommended Action    No action is required.

Error Message    %LWAPP-3-JOIN_MAX_AP_INTF_ERR: Received a join request from AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex], reached limit for maximum number of APs 
([dec]) on interface [dec], dropping the packet 

Explanation    Each interface has a limit to the number of APs that can be supported, this limit has been reached for the interface. The join request was dropped. If AP sends join request to another interface, a join response might be sent.

Recommended Action    No action is required.

Error Message    %LWAPP-3-JOIN_MAX_DOWNLOAD_ERR: Reached max limit ([dec]) on the 
number of APs that can download image, dropping join request 

Explanation    Controller could not respond to the join request from the AP as the current limit on the maximum number of concurrent image downloads possible has been reached. This may be a transient condition, if AP continues to send join requests, a join response would be sent.

Recommended Action    No action is required.

Error Message    %LWAPP-3-JOIN_MAX_JOIN_ERR: Reached max limit ([dec]) on the number of 
APs that can join the controller, dropping join request 

Explanation    Controller could not respond to the join request from the AP as the current limit on the maximum number of concurrent join requests that can be processed has been reached. This may be a transient condition, if AP continues to send join requests, a join response would be sent.

Recommended Action    No action is required.

Error Message    %LWAPP-3-JOIN_UNSUPP_AP: Received a join request from an unsupported 
AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex] [chars] (model [chars]), dropping the 
packet 

Explanation    This version of the controller software does not support the AP model.

Recommended Action    Check documentation regarding software version on supported AP models. Remove this AP from the network or move to a version of software that supports the AP.

Error Message    %LWAPP-3-KEY_ERR1: Unable to obtain public key from the certificate of 
AP[hex]:[hex]:[hex]:[hex]:[hex]:[hex], [chars] 

Explanation    Due to an internal error, public key for the AP could not be obtained, join response could not be sent to the AP.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-KEY_ERR2: Invalid public key type in certificate for AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Due to an invalid public key type for the AP, join response could not be sent to the AP.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-KEY_ERR3: Unable to free public key for AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Due to an internal error, public key information for this AP was not removed from the database while deleting the AP. There may be problems if this AP attempts joining the controller again.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-4-L3_PACK_ERR: Received an L3 LWAPP packet in L2 LWAPP mode, 
dropping the packet 

Explanation    Controller is configured in L3 LWAPP mode so packets received for L2 LWAPP mode will be dropped.

Recommended Action    No action is required.

Error Message    %LWAPP-6-LAG_TRAN: Link aggregation configuration is in transition 

Explanation    The controller's link aggregation configuration has been changed but the changes will not take effect until next system reboot.

Recommended Action    No action is required.

Error Message    %LWAPP-2-LIST_ERR1: List is corrupted - (head [address], tail 
[address], count [int]) 

Explanation    An internal error caused the list of APs maintained by the controller to become corrupted. The system may become unstable.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-2-LIST_ERR2: List is corrupted - (head [address], tail 
[address], count [int], p [address], p->next[address], p->prev [address]) 

Explanation    An internal error caused the list of APs maintained by the controller to become corrupted. The system may become unstable.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-2-LIST_ERR3: List is corrupted - (head [address], tail 
[address], count [int], actual [int]) 

Explanation    An internal error caused the list of APs maintained by the controller to become corrupted. The system may become unstable.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-2-LIST_ERR4: List is corrupted - (head [address], tail 
[address], p [address], p->next [address], p->tail[address]) 

Explanation    An internal error caused the list of APs maintained by the controller to become corrupted. The system may become unstable.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-2-LIST_ERR5: Skipping duplicate insertion - ( head [address], 
tail [address], count [int],entry [address]) 

Explanation    An internal error occurred when attempting to add an entry to the AP database. The system may become unstable.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-2-LIST_ERR6: Entry [address] not in the list - ([address], head 
[address], tail [address]) 

Explanation    An internal error occurred when attempting to remove an entry from the AP database. The system may become unstable.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-LIST_ERR7: Unable to delete AP entry, index ([dec]) is greater 
than maximum allowed 

Explanation    Unable to delete entry in AP table due to an internal error.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-LIST_ERR8: Unable to delete AP entry, entry not allocated 

Explanation    Unable to delete entry in AP table, entry has not been allocated.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-MAX_AID: Reached max limit ([dec]) on the association ID for 
AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Maximum number of clients that can be supported on the AP has been reached, association identifiers have been exhausted.A new client cannot be supported on the AP.

Recommended Action    No action is required.

Error Message    %LWAPP-3-MAX_AID2: Reached max limit on the association ID for AP (max 
association ID [dec]) 

Explanation    Maximum number of clients that can be supported on the AP has been reached, association identifiers have been exhausted.A new client cannot be supported on the AP.

Recommended Action    No action is required.

Error Message    %LWAPP-3-MBUF_ERR: No more system buffers, could not receive LWAPP 
packet 

Explanation    Out of system buffers.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-MCAST_APP_ERR: Failed to obtain multicast appliance 
configuration for interface [int], using default index ([int]) 

Explanation    Due to an internal error, multicast appliance configuration could not be obtained. Multicast may not operate as expected.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-MEM_ERR: Unable to allocate memory [chars]; AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    System is running on low memory.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-MEM_ERR2: Unable to allocate memory for LWAPP message 

Explanation    System is running low on memory.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-MEM_ERR3: Unable to allocate memory [chars] 

Explanation    System is running low on memory.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-MEM_ERR4: Unable to allocate memory [chars] (AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex]) 

Explanation    System is running low on memory.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-MFP_ERR: MFP report count ([int]) is too big in message; AP: 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Could not process MFP report as the message is too large. MFP may not work as expected.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-MFP_ERR1: Ignoring MFP message [chars] with invalid slot 
([int]) in message from AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    MFP message from the AP had an invalid slot, MFP may not function as expected.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-MIC_COUNTER: Received MIC countermeasure, WLAN [dec], slot 
[dec] AP [chars] client [hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    MIC errors have occurred on the specified AP. Clients may not be able to connect on the specified WLAN.

Recommended Action    Check for attacks in the network.

Error Message    %LWAPP-3-MIGRATE_ERR: Failed to migrate to regulatory domain requested 
for AP (name [chars], model [chars], MAC [hex]:[hex]:[hex]:[hex]:[hex]:[hex] 
,serial number [chars]) 

Explanation    Attempting to migrate to a new regulatory domain failed on the AP.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-MIRROR_ERR: Setting mirroring mode failed 

Explanation    Due to an internal error, configuration of mirroring mode failed.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-0-MSG_QUEUE_ERR: LWAPP message queue has not been created 

Explanation    LWAPP subsystem has not been initialized. APs may not be able to join the controller.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-MSG_RCV: Could not receive message from LWAPP queue 

Explanation    An internal error has occurred while reading LWAPP message. The system will attempt to process other LWAPP messages.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-MSG_SEND_ERR: Unable to send [chars] message to LWAPP; AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    LWAPP process may be busy, if this condition persists, it could lead to loss of LWAPP packets, dropping of AP connections and AP not getting configuration changes from the controller.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-MSG_SEND_ERR2: Unable to send [chars] message to LWAPP 

Explanation    LWAPP process may be busy, if this condition persists, it could lead to loss of LWAPP packets, dropping of AP connections and AP not getting configuration changes from the controller.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-0-MSGTAG071: MESH Child [hex]:[hex]:[hex]:[hex]:[hex]:[hex] 
has changed route or disconnected from Parent ([chars]) 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex]. 

Explanation    MESH Child [hex]:[hex]:[hex]:[hex]:[hex]:[hex] has changed route or disconnected from Parent ([chars]) [hex]:[hex]:[hex]:[hex]:[hex]:[hex].

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-0-MSGTAG072: Parent changed excessively. AP [chars] changed 
parent macAddr =[hex]:[hex]:[hex]:[hex]:[hex]:[hex]. 

Explanation    Parent changed excessively. AP [chars] changed parent macAddr =[hex]:[hex]:[hex]:[hex]:[hex]:[hex].

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-MSGTAG073: Unknown Mesh Neighbor Event from the AP [chars]. 

Explanation    Unknown Mesh Neighbor Event from the AP [chars].

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-MSGTAG162: Did not specify the MAC address for Mesh Neigh 
Request [dec]config 

Explanation    Did not specify the MAC address for Mesh Neigh Request [dec]config

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-MSGTAG221: [chars]() : Could not generate nonce 

Explanation    [chars]() : Could not generate nonce

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-MSGTAG257: 1: msgLen [dec] 

Explanation    1: msgLen [dec]

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-MSGTAG258: 2: len [dec] Type : [dec] = [dec] 

Explanation    2: len [dec] Type : [dec] = [dec]

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-MSGTAG259: 1: msgLen [dec] 

Explanation    1: msgLen [dec]

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-MSGTAG260: 2: len [dec] Type : [dec] = [dec] 

Explanation    2: len [dec] Type : [dec] = [dec]

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-MSGTAG261: 1: msgLen [dec] 

Explanation    1: msgLen [dec]

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-MSGTAG262: 2: len [dec] Type : [dec] = [dec] 

Explanation    2: len [dec] Type : [dec] = [dec]

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-MSGTAG263: 1: msgLen [dec] 

Explanation    1: msgLen [dec]

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-MSGTAG264: 2: len [dec] Type : [dec] = [dec] 

Explanation    2: len [dec] Type : [dec] = [dec]

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-MSGTAG265: 1: msgLen [dec] 

Explanation    1: msgLen [dec]

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-MSGTAG266: 2: len [dec] of [dec] Type : [dec] = [dec] 

Explanation    2: len [dec] of [dec] Type : [dec] = [dec]

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-MSGTAG267: Unable to parse LWAPP headers from AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Unable to parse LWAPP headers from AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex]

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-MSGTAG268: spamMeshSecbhStatsPayloadDecode: len 
received:[dec] expected=[dec] numQueues=[dec]\n 

Explanation    spamMeshSecbhStatsPayloadDecode: len received:[dec] expected=[dec] numQueues=[dec]\n

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-MSGTAG269: spamMeshSecbhStatsPayloadDecode: unexpected 
slotId=[dec]\n 

Explanation    spamMeshSecbhStatsPayloadDecode: unexpected slotId=[dec]\n

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-MSGTAG270: 1: msgLen [dec] 

Explanation    1: msgLen [dec]

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-MSGTAG271: MESH_NODE_UPDATE_PAYLOAD: len received:[dec] 
expected=[dec] 

Explanation    MESH_NODE_UPDATE_PAYLOAD: len received:[dec] expected=[dec]

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-MSGTAG272: spamDecodeMeshNodeUpdate: invalid payload 
type=[dec] 

Explanation    spamDecodeMeshNodeUpdate: invalid payload type=[dec]

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-MSGTAG273: 1: msgLen [dec] 

Explanation    1: msgLen [dec]

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-MSGTAG274: 2: len [dec] of [dec] Type : [dec] = [dec] 

Explanation    2: len [dec] of [dec] Type : [dec] = [dec]

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-MSGTAG275: 1: msgLen [dec] 

Explanation    1: msgLen [dec]

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-MSGTAG276: 2: len [dec] of [dec] Type : [dec] = [dec] 

Explanation    2: len [dec] of [dec] Type : [dec] = [dec]

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-MSGTAG277: spamSendLinktestRequest: refusing to send request 
when previous request is pending ltid [dec] 

Explanation    spamSendLinktestRequest: refusing to send request when previous request is pending ltid [dec]

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-MSGTAG278: spamDecodeLinktestResponse invalid msgLen [dec] 

Explanation    spamDecodeLinktestResponse invalid msgLen [dec]

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-MSGTAG279: spamDecodeLinktestResponse 
LINKTEST_CFG_PAYLOAD([dec]): invalid payload len [dec] != [dec] (msglen [dec]) 

Explanation    spamDecodeLinktestResponse LINKTEST_CFG_PAYLOAD([dec]): invalid payload len [dec] != [dec] (msglen [dec])

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-MSGTAG280: spamDecodeLinktestResponse 
LINKTEST_RESULTS_PAYLOAD([dec]): invalid payload len [dec] != [dec] 

Explanation    spamDecodeLinktestResponse LINKTEST_RESULTS_PAYLOAD([dec]): invalid payload len [dec] != [dec]

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-MSGTAG281: Out of range linktest ID ([dec]) specified 

Explanation    Out of range linktest ID ([dec]) specified

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-MSGTAG282: Attempt to obtain results from free linktest ID 
([dec]) 

Explanation    Attempt to obtain results from free linktest ID ([dec])

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-MSGTAG283: invalid linktestId [dec] 

Explanation    invalid linktestId [dec]

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-MSGTAG284: invalid linktestId [dec] 

Explanation    invalid linktestId [dec]

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-MSGTAG285: invalid linktestId [dec] 

Explanation    invalid linktestId [dec]

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-MSGTAG286: apfApLinktestFree: attempt to free 
linktestId=[dec] which is already free 

Explanation    apfApLinktestFree: attempt to free linktestId=[dec] which is already free

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-MSGTAG287: FREEING LinkTest [dec]: (status [dec]) 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] -> [hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    FREEING LinkTest [dec]: (status [dec]) [hex]:[hex]:[hex]:[hex]:[hex]:[hex] -> [hex]:[hex]:[hex]:[hex]:[hex]:[hex]

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-MSGTAG288: aplinktest_test: apfApLinktest returned failure 

Explanation    aplinktest_test: apfApLinktest returned failure

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-MSGTAG289: aplinktest_test: apfApLinktest returned success, 
ltid [dec] 

Explanation    aplinktest_test: apfApLinktest returned success, ltid [dec]

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-MSGTAG290: aplinktest_test: apfApLinktest returned failure 

Explanation    aplinktest_test: apfApLinktest returned failure

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-MSGTAG291: aplinktest_test: apfApLinktest returned success, 
ltid [dec] 

Explanation    aplinktest_test: apfApLinktest returned success, ltid [dec]

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-MSGTAG292: [dec]: (status [dec]) 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] -> [hex]:[hex]:[hex]:[hex]:[hex]:[hex] [dec] 
[dec] [dec] [dec] [dec] [dec] [dec] [dec] [dec] [dec] [dec] [dec] 

Explanation    [dec]: (status [dec]) [hex]:[hex]:[hex]:[hex]:[hex]:[hex] -> [hex]:[hex]:[hex]:[hex]:[hex]:[hex] [dec] [dec] [dec] [dec] [dec] [dec] [dec] [dec] [dec] [dec] [dec] [dec]

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-MSGTAG293: [dec]: FREE 

Explanation    [dec]: FREE

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-MSGTAG535: AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex] 
associated. Last AP rebooting was because RAP was using radio backhaul as uplink 
for 15 minutes. 

Explanation    AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex] associated. Last AP rebooting was because RAP was using radio backhaul as uplink for 15 minutes.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-MSGTAG650: LWAPP Join Request Country Code invalid for Bridge 
AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    LWAPP Join Request Country Code invalid for Bridge AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex]

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-MSGTAG651: LWAPP Join Request Bridge Authentication failed 
for AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    LWAPP Join Request Bridge Authentication failed for AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex]

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-MSGTAG675: Mesh APs not supported in multi-country mode. 
Rejected AP: [hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Mesh APs not supported in multi-country mode. Rejected AP: [hex]:[hex]:[hex]:[hex]:[hex]:[hex]

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-MSGTAG702: Not creating SSID [chars] on Bridge AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] because wlan0 is not supported 

Explanation    Not creating SSID [chars] on Bridge AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex] because wlan0 is not supported

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-MSGTAG829: Unable to allocate buffer for mesh link para 
message to AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Unable to allocate buffer for mesh link para message to AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex]

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-MSGTAG830: Unable to allocate buffer for AP BH rate message 
to AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Unable to allocate buffer for AP BH rate message to AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex]

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-MSGTAG831: Unable to allocate buffer for AP BH dev message to 
AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Unable to allocate buffer for AP BH dev message to AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex]

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-MSGTAG832: Unable to allocate buffer for AP Bridge State 
message to AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Unable to allocate buffer for AP Bridge State message to AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex]

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-MSGTAG833: Unable to allocate buffer for AP Bridge Groupname 
message to AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Unable to allocate buffer for AP Bridge Groupname message to AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex]

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-MSGTAG834: Unable to allocate buffer for AP Public Safety 
message to AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Unable to allocate buffer for AP Public Safety message to AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex]

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-MSGTAG881: Unable to allocate buffer for Mesh Neigh Request 
message to AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Unable to allocate buffer for Mesh Neigh Request message to AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex]

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-MSGTAG882: Unable to allocate buffer for Mesh Linktest Data 
Request message to AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Unable to allocate buffer for Mesh Linktest Data Request message to AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex]

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-MSGTAG883: Unable to allocate buffer for Mesh Path Request 
message to AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Unable to allocate buffer for Mesh Path Request message to AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex]

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-MSGTAG884: Unable to allocate buffer for Mesh Stats Request 
message to AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Unable to allocate buffer for Mesh Stats Request message to AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex]

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-MSGTAG885: Unable to parse LWAPP headers from AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Unable to parse LWAPP headers from AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex]

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-MSGTAG886: Received Mesh stats response from unknown AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Received Mesh stats response from unknown AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex]

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-MSGTAG887: Security processing of Mesh Stats Response failed 
from AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Security processing of Mesh Stats Response failed from AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex]

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-MSGTAG888: Processing of Mesh Stats Response failed from AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Processing of Mesh Stats Response failed from AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex]

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-MSGTAG889: Unable to allocate buffer for Mesh Security Stats 
Request message to AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Unable to allocate buffer for Mesh Security Stats Request message to AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex]

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-MSGTAG890: Unable to parse LWAPP headers from AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Unable to parse LWAPP headers from AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex]

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-MSGTAG891: Received Mesh Security Stats response from unknown 
AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Received Mesh Security Stats response from unknown AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex]

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-MSGTAG892: Processing of Mesh Security Stats Response failed 
from AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Processing of Mesh Security Stats Response failed from AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex]

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-MSGTAG893: Unable to parse LWAPP headers from AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Unable to parse LWAPP headers from AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex]

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-MSGTAG894: Received Mesh Adj response from unknown AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Received Mesh Adj response from unknown AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex]

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-MSGTAG895: Security processing of Mesh Adj Response failed 
from AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Security processing of Mesh Adj Response failed from AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex]

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-MSGTAG896: Processing of Mesh Adj Response failed from AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Processing of Mesh Adj Response failed from AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex]

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-MSGTAG897: Unable to parse LWAPP headers from AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Unable to parse LWAPP headers from AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex]

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-MSGTAG898: Received Mesh Neigh response from unknown AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Received Mesh Neigh response from unknown AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex]

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-MSGTAG899: Security processing of Mesh Neigh Response failed 
from AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Security processing of Mesh Neigh Response failed from AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex]

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-MSGTAG900: Processing of Mesh Neigh Response failed from AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Processing of Mesh Neigh Response failed from AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex]

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-MSGTAG901: Unable to allocate buffer for Mesh Linkrate 
Request message to AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Unable to allocate buffer for Mesh Linkrate Request message to AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex]

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-MSGTAG902: Unable to parse LWAPP headers from AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Unable to parse LWAPP headers from AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex]

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-MSGTAG903: Received Mesh Linkrate response from unknown AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Received Mesh Linkrate response from unknown AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex]

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-MSGTAG904: Security processing of Mesh Linkrate Response 
failed from AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Security processing of Mesh Linkrate Response failed from AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex]

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-MSGTAG905: Processing of Mesh Linkrate Response failed from 
AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Processing of Mesh Linkrate Response failed from AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex]

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-MSGTAG906: Unable to parse LWAPP headers from AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Unable to parse LWAPP headers from AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex]

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-MSGTAG907: Received station stats update from unknown AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Received station stats update from unknown AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex]

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-MSGTAG908: Unable to parse LWAPP headers from AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Unable to parse LWAPP headers from AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex]

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-MSGTAG909: Unable to parse LWAPP headers from AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Unable to parse LWAPP headers from AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex]

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-MSGTAG910: Received mesh node update from unknown AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Received mesh node update from unknown AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex]

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-MSGTAG911: Processing of mesh node update failed from AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Processing of mesh node update failed from AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex]

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-MSGTAG912: Unable to parse LWAPP headers from AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Unable to parse LWAPP headers from AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex]

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-MSGTAG913: Unable to parse LWAPP headers from AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Unable to parse LWAPP headers from AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex]

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-MSGTAG914: Received mesh env. update from unknown AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Received mesh env. update from unknown AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex]

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-MSGTAG915: Processing of mesh env. update failed from AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Processing of mesh env. update failed from AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex]

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-MSGTAG916: Unable to parse LWAPP headers from AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Unable to parse LWAPP headers from AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex]

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-MSGTAG917: Failed to update CAC module with parent address: 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Failed to update CAC module with parent address: [hex]:[hex]:[hex]:[hex]:[hex]:[hex]

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-MSGTAG918: Unable to parse LWAPP headers from AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Unable to parse LWAPP headers from AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex]

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-MSGTAG919: Received mesh neighs update from unknown AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Received mesh neighs update from unknown AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex]

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-MSGTAG920: Processing of mesh neighs update failed from AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Processing of mesh neighs update failed from AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex]

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-MSGTAG921: Unable to allocate buffer for Linktest Request 
message to AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Unable to allocate buffer for Linktest Request message to AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex]

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-MSGTAG922: Unable to parse LWAPP headers from AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Unable to parse LWAPP headers from AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex]

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-MSGTAG923: spamDecodeLinktestResponse 
LINKTEST_CFG_PAYLOAD([dec]): linktest ID from AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    spamDecodeLinktestResponse LINKTEST_CFG_PAYLOAD([dec]): linktest ID from AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex]

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-MSGTAG924: spamDecodeLinktestResponse (ltid:[dec]) 
unexpected LINKTEST_CFG_PAYLOAD from AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    spamDecodeLinktestResponse (ltid:[dec]) unexpected LINKTEST_CFG_PAYLOAD from AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex]

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-MSGTAG925: spamDecodeLinktestResponse 
LINKTEST_RESULTS_PAYLOAD([dec]): invalid linktest ID([dec]) from AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    spamDecodeLinktestResponse LINKTEST_RESULTS_PAYLOAD([dec]): invalid linktest ID([dec]) from AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex]

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-MSGTAG926: spamDecodeLinktestResponse (ltid:[dec]) 
unexpected LINKTEST_RESULTS_PAYLOAD from AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    spamDecodeLinktestResponse (ltid:[dec]) unexpected LINKTEST_RESULTS_PAYLOAD from AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex]

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-MSGTAG927: spamDecodeLinktestResponse unrecognized payload 
[dec] from AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    spamDecodeLinktestResponse unrecognized payload [dec] from AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex]

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-MSGTAG928: Linktest requested for unknown AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Linktest requested for unknown AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex]

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-MSGTAG929: Linktest already running on AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Linktest already running on AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex]

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-MSGTAG930: Linktest already running on AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Linktest already running on AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex]

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-MSGTAG931: link test id is already in use: [dec] 

Explanation    link test id is already in use: [dec]

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-MSGTAG932: Too many linktests running, cannot manage AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] to AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Too many linktests running, cannot manage AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex] to AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex]

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-MSGTAG933: Unable to parse LWAPP headers from AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Unable to parse LWAPP headers from AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex]

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-MSGTAG934: Received linktest response from unknown AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Received linktest response from unknown AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex]

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-MSGTAG935: Processing of linktest response failed from AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Processing of linktest response failed from AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex]

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-NPU_ERR: Invalid NPU index [int] 

Explanation    Indexing into the network processor's internal table with invalid index.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-NPU_ERR2: All NPU indices have been used (max [dec]) 

Explanation    Could not create an entry for the AP in fast path as the internal database is full. AP may not be able to join the controller.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-NPU_ERR3: Could not allocate NPU index for AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Due to an internal error, AP entry in the fast path could not be configured successfully. AP may not be able to join the controller.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-NPU_ERR4: Failed to add NPU entry for AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex], index: [int], switch IP: 
[int].[int].[int].[int], switch port: [int], interface num: [int], VLAN: [int] AP 
IP: [int].[int].[int].[int], AP Port: [int], next hop MAC: 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Due to an internal error, the AP entry could not be added to the network processor. AP may not behave as expected.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-OFDM_ERR: Received invalid OFDM channel ([int]), unable to 
set the channel 

Explanation    An internal error occurred when attempting to configure a channel.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-OSSID_ERR: Override SSID [chars] does not exist on the 
controller 

Explanation    Could not delete the specific override SSID from the controller's database. Override SSID functionality may not work as expected.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-PARSE_ERR: LWAPP header parsing failed for packet from AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex], dropping the packet 

Explanation    An internal error has occurred when processing LWAPP control packet, the LWAPP header was not understood, therefore the packet was dropped. AP may not function as expected.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-PARSE_ERR2: LWAPP header parsing failed, dropping the packet 

Explanation    An internal error has occurred when processing LWAPP control packet, the LWAPP header was not understood, therefore the packet was dropped. AP may not function as expected.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-PARSE_ERR3: Unable to parse LWAPP headers for [chars]; AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    An internal error has occurred when processing LWAPP control packet, the LWAPP header was not understood, therefore the packet was dropped. AP may not function as expected.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-PAYLOAD_ERR: [chars] - AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Not all payloads expected in the LWAPP message were present, controller drops such LWAPP messages from the AP. AP may not be able to join the controller.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-PAYLOAD_MISSING: [chars] -   

Explanation    Not all payloads expected in the LWAPP message were present.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-0-PDISC_LEN_ERR: Invalid primary discovery request received 
from AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex] - message length ([int]) is invalid 

Explanation    An incorrectly formatted primary discovery request was received from an access point and was ignored.

Recommended Action    No action is required.

Error Message    %LWAPP-6-PORTMAP_ERR: Failed to obtain multicast port map for 
interface [int], using default index ([int]) 

Explanation    Could not get information on multicast port, using the information available for unicast. Multicast may not work as expected.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-PROFILE_NAME_ERR: Could not find profile name for WLAN [dec] 
with SSID [chars]; AP: [hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    An internal error occurred due to which profile name for the WLAN could not be found in the database.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-PROFILE_NAME_ERR2: Could not find profile name for WLAN with 
SSID [chars] 

Explanation    An internal error occurred due to which profile name for the WLAN could not be found in the database.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-RADIO_CRASH: Radio ([dec]) crashed and generated a core dump 
on AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    An error occurred on the radio for the specified AP. AP may not function as expected.

Recommended Action    Collect the radio crash information for the AP and contact technical assistance.

Error Message    %LWAPP-2-RADIO_ERR: [chars] failure on radio slot [dec] on AP [chars] 

Explanation    The radio slot on the specified AP has failed. It will impact clients that are connected.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-RADIO_ERR2: Unknown AP radio failed alarm ([dec]) from the AP 
[chars] 

Explanation    AP sent radio failed alarm that the controller could not understand.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-2-RADIO_NOERR: AP [chars] recovered from [chars] failure on 
radio slot [dec] 

Explanation    The radio slot on the specified AP is not experiencing failures any more.

Recommended Action    No action is required.

Error Message    %LWAPP-3-RADIUS_ERR: Could not send join reply, AP authorization 
failed; AP:[hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Join reply was not sent to the AP as AP authentication failed.

Recommended Action    Check the AP credentials on the RADIUS server, or the local MAC filtering table - if it was configured. Also check if RADIUS servers are configured and are reachable.

Error Message    %LWAPP-3-RADIUS_PORT_ERR: Received invalid RADIUS port number for AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Port number for RADIUS specified is incorrect, RADIUS configuration could not be configured on the AP.

Recommended Action    Check the RADIUS configuration for the H-REAP APs configured on the controller.

Error Message    %LWAPP-3-RADIUS_SECRET_ERR1: MAC filtering request dropped as shared 
secret for RADIUS was not found 

Explanation    Unable to find RADIUS password, MAC filter authenticate request was aborted. AP may not be able to join the controller.

Recommended Action    Check the RADIUS shared secret configured on the controller and the RADIUS server.

Error Message    %LWAPP-3-RADIUS_SECRET_ERR2: Received invalid RADIUS shared secret; AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Length of the shared secret was incorrect, RADIUS configuration could not be configured on the AP.

Recommended Action    Check the RADIUS configuration for the H-REAP APs configured on the controller.

Error Message    %LWAPP-3-RD_ERR: Regulatory domain of the AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] does not match the country code ([chars]) 

Explanation    A mismatch occurred in the country code and regulatory domain configured on the AP and controller. AP may not be able to join the controller.

Recommended Action    Check if the correct (that intended to work with the AP) country code is configured on the controller

Error Message    %LWAPP-3-RD_ERR10: AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex] is disabled 
- default country code is [chars] 

Explanation    Due to an error in the regulatory domain configured on the AP and the inability to associate a right country code, the AP has been disabled. AP will not be able to function as expected.

Recommended Action    Check if the correct (that intended to work with the AP) country code is configured on the controller

Error Message    %LWAPP-3-RD_ERR2: Regulatory domain for AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex]  is not updated for all slots. (Updated [dec] 
out of [dec] filled slots) 

Explanation    An error has occurred in the regulatory domain information for the slots on the AP, all of them do not have it configured. AP may not be able to join the controller.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-RD_ERR3: Invalid regulatory domain ([hex]) sent by AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] (slot: [dec] [chars]) 

Explanation    Regulatory domain configured on the AP slot was not understood. AP may not be able to join the controller.

Recommended Action    Check if the correct (that intended to work with the AP) country code is configured on the controller

Error Message    %LWAPP-3-RD_ERR4: Invalid regulatory domain [chars] for AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Regulatory domain configured on the AP was not understood. AP may not be able to join the controller.

Recommended Action    Check if the correct (that intended to work with the AP) country code is configured on the controller

Error Message    %LWAPP-3-RD_ERR5: APs ([hex]:[hex]:[hex]:[hex]:[hex]:[hex] - slot 
[dec] [chars]) regulatory domain is not set, this is not allowed in country [chars] 

Explanation    Due to an error in the regulatory domain configured on the AP, AP may not be able to join the controller.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-RD_ERR6: APs ([hex]:[hex]:[hex]:[hex]:[hex]:[hex]) 
regulatory domain ([chars]) is not supported in country ([chars]), slot [chars] 
([dec]) supports [chars] 

Explanation    Due to an error in the regulatory domain configured on the AP, AP may not be able to join the controller.

Recommended Action    Check if the correct (that intended to work with the AP) country code is configured on the controller

Error Message    %LWAPP-3-RD_ERR7: Invalid country code ([chars]) for AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Due to an error in the regulatory domain configured on the AP, AP may not be able to join the controller.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-RD_ERR8: Country code ([chars]) not configured for AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Due to an error in the regulatory domain configured on the AP, AP may not be able to join the controller.

Recommended Action    Check if the correct (that intended to work with the AP) country code is configured on the controller

Error Message    %LWAPP-3-RD_ERR9: APs [hex]:[hex]:[hex]:[hex]:[hex]:[hex] country 
code changed from ([chars]) to ([chars]) 

Explanation    Country code associated with regulatory domain configured on the AP was incorrect, so the country code has been changed. AP may not function correctly in the region it is deployed.

Recommended Action    If the AP is functioning correctly with the changed country code, ignore this message, else contact technical assistance.

Error Message    %LWAPP-3-REBOOT_ERR2: AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex] joined 
to the controller currently experienced a reboot earlier - ([chars] [chars] 
[chars]) 

Explanation    AP was unable to service clients for sometime as it experienced a reboot due to the reason specified in the message.

Recommended Action    Obtain the AP crash files from the controller, collect all the message logs. Also, if the AP experienced a reboot as a result of missing heartbeat from the controller, check the network for connectivity issues. If AP experienced a reboot because join response was not obtained, check connectivity issues to the AP manager interface if the controller is in L3 mode, ensure that it is reachable. After collecting the above data, contact technical assistance if necessary.

Error Message    %LWAPP-6-REBOOT_INFO1: Controller initiated reboot of AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] that has currently joined the controller - 
([chars] [chars]) 

Explanation    The last reboot for the specified AP was triggered by the controller due to configuration changes on the AP that required a reboot.

Recommended Action    No action is required.

Error Message    %LWAPP-3-RECV_FAIL: Could not process LWAPP packet 

Explanation    An internal error has occurred while processing the LWAPP packet. The packet was dropped.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-REKEY_ERR: Did not receive an expected rekey message from AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    AP may be disconnected as the rekeying message expected from the AP was not received.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-REPLAY_ERR: Received replay error on slot [dec], WLAN ID 
[dec], count [dec] from AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Controller received replay error on the specified AP and WLAN.

Recommended Action    Check if there is a replay attack in the network.

Error Message    %LWAPP-3-ROGUE_ERR: Could not send rogue report for 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] from AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Due to an internal error rogue information could not be sent.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-RX_ERR: Received an unexpected LWAPP packet from AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Controller had no pending messages for this AP, the unexpected response received was dropped. It is possible that this message arrived late at the controller.

Recommended Action    No action is required.

Error Message    %LWAPP-3-RX_ERR3: Received LWAPP packet with invalid sequence number 
(got [dec]expected [dec]) - from AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    LWAPP packet sequence mismatch has occurred, LWAPP packet was dropped. AP may not function as expected.

Recommended Action    No action is required.

Error Message    %LWAPP-3-RX_ERR4: Received invalid add mobile action ([int]) from AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] (read index = [int]) 

Explanation    Adding a client to the AP failed. The client may not be serviced as expected.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-RX_ERR7: Received an invalid sequence number, [chars] ; AP: 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    LWAPP sequencing failed for this LWAPP message, the message was dropped. AP may not function as expected.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-RX_ERR8: Unable to receive [chars] from AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Due to an internal error, the LWAPP message could not be processed by the controller. AP may not function as expected.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-RX_ERR9: Received a bad sequenced [chars] message from AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    LWAPP packet sequence mismatch has occurred, LWAPP packet was dropped. AP may not function as expected.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-1-SECURITY_ERR: Not advertising SSID [chars] on REAP AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] because L3 security is enabled 

Explanation    Only H-REAP APs can advertise the specified SSID due to security issues, not advertising this SSID on the AP - as it is not an H-REAP AP.

Recommended Action    No action is required.

Error Message    %LWAPP-2-SEM_CREATE_ERR: Could not create semaphore [chars] 

Explanation    Unable to allocate a lock for handling operations on the internal database. Exclusive access to information in this may therefore not be possible, leading to data corruption. The system may become unstable.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-SIG_ERR: No pattern in signature with id [dec], (list id = 
[dec]), could not encode signature 

Explanation    Due to an internal error the LWAPP message between the controller and AP was not delivered. The system may not behave as expected.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-SIG_ERR1: Unable to find name for signature [dec] in list 
[dec] for report from AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex]. 

Explanation    Controller could not process the signature report sent by the AP. Some attacks may not be detected.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-SIG_ERR10: Unable to re-enable signature processing on AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Controller could not notify the AP about the new signature. Signature processing on the AP may not work as expected.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-SIG_ERR2: Unable to find description for signature [dec] in 
list [dec] for report from AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Controller could not process the signature report sent by the AP. Some attacks may not be detected.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-SIG_ERR3: Unknown signature track information ([dec]) 

Explanation    Controller could not process the signature report sent by the AP. Some attacks may not be detected.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-SIG_ERR4: Unknown signature report type ([dec]) 

Explanation    Controller could not process the signature report sent by the AP. Some attacks may not be detected.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-SIG_ERR5: Could not gain exclusive access to the signature 
database 

Explanation    Controller could not send signature list to the AP due to an internal error.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-SIG_ERR6: All signatures are disabled in the [chars] 
signature file. 

Explanation    Controller could not send signature information to the AP because all signatures are disabled.

Recommended Action    Check if all signatures are disabled, enable them if desired, else ignore this message.

Error Message    %LWAPP-3-SIG_ERR7: Unable to send toggle signature request to AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Controller failed to change the state of signature processing on the specified AP. Signature processing on the AP may not function as expected.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-SIG_ERR8: Unable to disable signature processing on AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Due to an internal error, signature processing on the specified AP could not be disabled. As a result, the new signature information could not be sent to the AP.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-SIG_ERR9: Error sending new signatures to AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    New signature information could not be sent to the AP. Signature processing on the AP may not work as expected.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-4-SIG_INFO1: Signature information; AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex], alarm ON, [chars] sig [chars], track 
[chars]precedence [dec], hits [dec], slot [dec], channel [dec], most offending MAC 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Signature information on the specified AP.

Recommended Action    No action is required.

Error Message    %LWAPP-3-SLOT_ERR: AP ([chars]) has no radio cards 

Explanation    No radio cards were detected on AP. AP may not be able to service clients.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-2-SOCK_ERR: Error [chars] LWAPP socket 

Explanation    An internal error has occurred, LWAPP subsystem could not be initialized.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-SOCK_ERR2: Socket select error ([dec]) 

Explanation    An internal error caused a temporary failure in a message handling process. The system is attempting to recover from this situation.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-SOCK_ERR3: Could not read from the LWAPP socket 

Explanation    A failure occurred when processing an internal LWAPP message. The system may become unstable.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-SOCK_ERR4: Could not read from LWAPP socket, frame length out 
of bounds ([dec]) 

Explanation    A failure occurred when processing an internal LWAPP message. The system may become unstable.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-SSID_ERR1: Not creating SSID [chars] on AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] because WEP 128 bit encryption is not 
supported on the AP 

Explanation    The specified WLAN was not added on the AP as 128 bit encryption is not supported on the AP.

Recommended Action    Change the number of bits in the encryption, or ignore this message if the AP need not advertise the SSID.

Error Message    %LWAPP-3-SSID_ERR2: Not creating SSID [chars] on AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] because diagnostics channel is enabled 

Explanation    The specified WLAN was not added to the AP because diagnostics is enabled on that WLAN.

Recommended Action    If the WLAN needs to be enabled, disable diagnostics channel on the WLAN.

Error Message    %LWAPP-3-STATIC_IP_ERR: Configured static IP Address is not valid for 
AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    IP address information sent by the AP is incorrect.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-2-TASK_CREATE_ERR: Failed to create LWAPP [chars] task 

Explanation    An internal error occurred due to which the LWAPP subsystem could not be initialized. APs may not be able to join the controller.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-TIME_ERR1: Unable to retrieve current time when processing 
[chars] from AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Due to an internal error, time information on the controller could not be obtained, AP may not function as expected.

Explanation    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-TIME_ERR2: Keeping connection from AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] in overload condition (max allowed APs [dec], 
current load [dec]) 

Explanation    The controller is overloaded, but this echo request is being processed.

Recommended Action    Check if another controller needs to be added to support the number of APs that are deployed.

Error Message    %LWAPP-3-TIME_ERR3: Unable to retrieve time information to send AP 
timesync config packet 

Explanation    Due to an internal error, information regarding controller's time could not be sent to the AP. AP and controller time may be out of sync due to which AP may not function as expected.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-TMR_ERR: [chars] timer count ([dec]) does not match that in 
the AP ([dec]) AP: [hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Due to an internal error, this timer event was not processed. AP may not operate as expected.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-TMR_FREE_ERR: Failed to free [chars] timer; AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    An internal error occurred while processing a timer. AP may not operate as expected.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-TMR_START_ERR: Failed to start [chars] timer; AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Due to an internal error, the timer could not be triggered. AP may not operate as expected.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-TX_ERR: Could not transmit LWAPP packet, transmission queue 
is full for AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    LWAPP packet transmission failed as the transmit queue has reached a maximum limit. It is possible that the response packets from the AP are not reaching the controller.

Recommended Action    Check if the AP has rebooted or if it has been removed from the network, or if there are connectivity issues between the AP and the controller.

Error Message    %LWAPP-3-TX_ERR2: Transmission of LWAPP message failed for AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Due to an internal error, LWAPP message could not be transmitted. AP may not function as expected.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-TX_ERR3: Max retransmissions for LWAPP control message 
reached on AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex] for [chars] (number of pending 
messages is [dec]) 

Explanation    Maximum number of times an LWAPP control packet is transmitted before declaring the AP dead has been reached for this AP. The AP may not be on the network, or might have rebooted.

Recommended Action    Check if the AP has rebooted or if it has been removed from the network, or if there are connectivity issues between the AP and the controller.

Error Message    %LWAPP-3-TX_ERR4: Unable to retrieve AP's 
([hex]:[hex]:[hex]:[hex]:[hex]:[hex]) reachability information (VLAN identifier, 
port number, etc) to [chars] 

Explanation    LWAPP message was dropped as the information to send the message was not available.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-TX_ERR5: Failed to transmit [chars] to AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Due to an internal error, LWAPP message could not be transmitted.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-TX_ERR6: Could not send LWAPP control packet, data length 
([int]) exceeds MTU ([int]) on interface [int] 

Explanation    Due to incorrect length of the LWAPP message, it was dropped.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-TX_ERR7: Could not transmit LWAPP control packet (error = 
[int]) 

Explanation    Due to an internal error, LWAPP message could not be transmitted.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-TX_ERR8: Unable to determine MTU for interface [int] 

Explanation    Error obtaining MTU for the interface, LWAPP message will be dropped.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-UDP_PORT_ERR: Received invalid UDP port ([dec]) in the packet 
from AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex], dropping the packet 

Explanation    An invalid packet received from the AP was dropped.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-UNSUPP_AP: Refusing image download request from unsupported 
AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    The AP is not supported in the current version of the controller's software, hence the request to download image is ignored.

Recommended Action    No action is required.

Error Message    %LWAPP-3-UNSUPPORTED_TYPE: Received an invalid [chars] ([dec]): AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    The information received on the controller was not understood, the message was dropped.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-UNSUPPORTED_TYPE2: Received an invalid [chars] ([dec]) 

Explanation    The information received on the controller was not understood, the message was dropped.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-UNSUPPORTED_TYPE3: Received an invalid [chars] ([dec]) or 
[chars] ([dec]); AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    The information received on the controller was not understood, the message was dropped.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-VALIDATE_ERR: Validation of [chars] failed - AP  
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Due to invalid parameters sent, validation of the LWAPP message failed and the message was dropped.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-VENDOR_ID_ERR: Invalid vendor identifier in vendor specific 
payload from AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Due to invalid vendor information, the message from the AP was dropped.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-VENDOR_SPEC_ERR: Failed decoding vendor specific payload 

Explanation    Message from the AP could not be processed due an error in the vendor specific information.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-WLAN_ERR: Unable to find WLAN [dec] - [chars]; AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    An internal error has occurred due to which the WLAN information could not be found. The specified operation could not be performed.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-WLAN_ERR2: Unable to find WLAN [dec] to be deleted; AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    The requested WLAN does not exist in the database, so the request to delete was ignored.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-WLAN_ERR4: Unable to add WLAN on AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] - max limit reached 

Explanation    An invalid WLAN ID was received due to which the controller could not configure the WLAN on the AP.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-3-WLAN_ERR5: Unable to find WLAN [dec] to be updated on AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    The requested WLAN does not exist in the database, so the request to update the information on the AP was ignored.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %LWAPP-6-WLAN_STATUS_ERR: [chars] [dec] [chars] [dec] [chars]; AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    The operation attempted on the slot for the WLAN was not necessary, as the AP was already in that state, this message was ignored.

Recommended Action    No action is required.