Cisco Wireless LAN Controller System Message Guide
TFTP through WPS
Downloads: This chapterpdf (PDF - 335.0KB) The complete bookPDF (PDF - 15.88MB) | Feedback

TFTP Messages

Table Of Contents

TFTP Messages

TOOL Messages

TRAPMGR Messages

UPDATE Messages

USMDB Messages

WCP Messages

WEB Messages

WPS Messages


TFTP Messages

This section contains Trivial File Transfer Protocol (TFTP) messages.

Error Message    %TFTP-3-FILE_RCV_FAIL: Error while receiving the file. File name: 
[chars] 

Explanation    Error while receiving the file.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %TFTP-3-FILE_READ_FAIL: Error while reading the local file. File Desc: 
[dec] 

Explanation    Error while reading the local file.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %TFTP-3-FILE_SND_FAIL: Error while sending the file. File name: 
[chars] 

Explanation    Error while sending the file.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %TFTP-4-FILE_TOO_BIG: FILE is too big. MAX allowed size for this file 
type is [dec]blocks ([dec] bytes). 

Explanation    FILE is too big.

Recommended Action    No action is required.

Error Message    %TFTP-3-FILE_WRITE_FAIL: Error while writing [dec] bytes to file. Tftp 
error. 

Explanation    Error while writing to a file. Tftp error.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %TFTP-4-INV_ACK_NUM: Invalid Ack received. The Ack number doesn't 
match the request. Send block #[dec], got ACK for #[dec]. 

Explanation    Invalid Ack received. The Ack number doesn't match the request.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %TFTP-3-INV_COMMAND: Invalid tftp command: '[chars]'. 

Explanation    Invalid tftp command.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %TFTP-3-INV_OPCODE: Invalid opcode being used by tftp server or data 
is corrupt. Opcode: [dec] 

Explanation    Invalid opcode being used by tftp server or data is corrupt.

Explanation    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %TFTP-3-INV_STR_TRM: Error while reading internal buffer!. Invalid 
string termination. 

Explanation    Error while reading internal buffer!. Invalid string termination.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %TFTP-4-INV_TFTP_MODE: Invalid tftp mode: '[chars]'. Possible modes 
are 'binary', 'octet' and 'ascii' 

Explanation    Invalid tftp mode. Possible modes are 'binary', 'octet' and 'ascii'

Recommended Action    No action is required.

Error Message    %TFTP-4-RETRY_SOCK_RCV_FAIL: Failed to receive a message through the 
tftp socket. Retrying to receive data.. 

Explanation    Failed to receive a message through the tftp socket. Retrying to receive data..

Recommended Action    No action is required.

Error Message    %TFTP-3-SOCKET_BIND_FAIL: Failed to bind the socket for tftp. Tftp 
initialization failed. 

Explanation    Failed to bind the socket for tftp. Tftp initialization failed.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %TFTP-3-SOCKET_CREATE_FAIL: Failed to create socket for tftp. Tftp 
initialization failed 

Explanation    Failed to create socket for tftp. Tftp initialization failed

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %TFTP-3-SOCK_OPT_FAIL: Failed to configure the socket for tftp. Tftp 
initialization failed. 

Explanation    Failed to configure the socket for tftp. Tftp initialization failed.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %TFTP-3-SOCK_RCV_FAIL: Failed to receive a message through the tftp 
socket.Check network connection and route.Port: [int] 

Explanation    Failed to receive a message through the tftp socket.Check network connection and route.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %TFTP-3-SOCK_SND_FAIL: Failed to send a message through the tftp 
socket. Tftp Failure.Dest Port: [int] 

Explanation    Failed to send a message through the tftp socket. Tftp Failure.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %TFTP-3-SOCK_TIMEOUT: TFTP Timeout no reply from TFTP server.Check 
network connection and route to the serverTime out between each retry: [dec]. 

Explanation    TFTP Timeout no reply from TFTP server.Check network connection and route to the server

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %TFTP-3-TFTP_SVR_ERR: TFTP Server Error: [dec]: "[chars]". 

Explanation    TFTP Server Error.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %TFTP-3-WRITE_NOCLOSE_FAIL: Error while writing the local file: 
[chars] 

Explanation    Error while writing the local file.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

TOOL Messages

This section contains tool subsystem (TOOL) messages.

Error Message    %TOOL-3-FILECORUPT: Footer offset ([dec]) past end of file ([dec] 
bytes)in file [chars] 

Explanation    This error suggest that the concerned file is corrupted

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %TOOL-3-FILEIMGSIGCORUPT: Error! Invalid image signature in file 
[chars] 

Explanation    This error suggest that the concerned file is corrupted

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %TOOL-3-FILEMAP: Error: Unable to map file [chars] :errcode [chars]. 

Explanation    Failed to map a file

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %TOOL-3-FILEOPEN: Error opening filename <[chars]>: [chars]. 

Explanation    Failed to open a file.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %TOOL-3-FILEREADINGPAST: Error! Reading past end of file [chars]! 
current = [dec] bytes, size= [dec] bytes. 

Explanation    This error suggest that the concerned file is corrupted

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %TOOL-3-FOOTERMISMATCH: Error! Footer mismatch from header! ([address] 
!= [address]. 

Explanation    This error suggests a corrupt TLV

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %TOOL-3-INSTALLTLV: Error [dec] installing TLV. 

Explanation    This error suggests that trying to run a TLV has failed

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %TOOL-3-SIGLENCORRUP: Error! signature length is corrupted!. 

Explanation    This error occurs when the signature length is corrupted

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %TOOL-3-SIGTYPCORRUP: Error! Invalid signature type: [hex]. 

Explanation    This error occurs when the signature type is corrupted

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %TOOL-3-TLVACTIONERR: Error: Invalid TLV action code [dec]. 

Explanation    This error suggests that an improper action was passed upon to \n perform on the TLV which does not exists as an action

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

TRAPMGR Messages

This section contains trap manager (TRAPMGR) messages.

Error Message    %TRAPMGR-3-CFG_FILE_WRITE_FAILED: Error on call to osapiFsWrite 
routine on config file [chars]. 

Explanation    Error writing to config file.

Recommended Action    No action is required.

Error Message    %TRAPMGR-3-DTL_EVENT_PORT_ENTRY: Failed registration for 
DTL_EVENT_PORT_BSR_TRAP_ENTRY. 

Explanation    Failed registration for DTL event port trap entry.

Recommended Action    No action is required.

Error Message    %TRAPMGR-3-DTL_EVENT_PORT_EXIT: Failed registration for 
DTL_EVENT_PORT_BSR_TRAP_EXIT. 

Explanation    Failed registration for DTL event port trap exit.

Recommended Action    No action is required.

UPDATE Messages

This section contains messages related to system updates (UPDATE).

Error Message    %UPDATE-2-BINARY_XML: [chars]. 

Explanation    During binary to XML configuration conversion either cfg or xml directory creation or temporary file creation failed.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %UPDATE-3-CERT_INST_FAIL: Failed to install Webauth certificate. rc = 
[dec] 

Explanation    Failed to install Webauth certificate.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %UPDATE-3-CP_CMD_FAIL: Error while copying webauth files to internal 
filesystem. 

Explanation    Error while copying webauth files to internal filesystem.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %UPDATE-3-EOF_ERR: Error! Reading past end of file! current = [dec] 
bytes, size= [dec] bytes. File name: [chars]. Failed to install downloaded s/w. 

Explanation    Error! Reading past end of file!. Failed to install downloaded s/w.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %UPDATE-3-FILE_OPEN_FAIL: Filed to open file [chars]. 

Explanation    Failed to open a file.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %UPDATE-3-FILE_READ_FAIL: Error reading certificate file <[chars]>: 
[chars]. 

Explanation    Error reading certificate file.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %UPDATE-3-FILE_REN_FAIL: Unable to Rename file [chars] to [chars]: 
[chars]. 

Explanation    Unable to Rename file.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %UPDATE-3-FILE_WRITE_FAIL: Unable to write to <[chars]>: [chars]. 

Explanation    Unable to write to a file.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %UPDATE-3-FOTER_MISMACH: Error! Footer mismatch from header! 
([address] != [address]). Failed to install downloaded s/w. 

Explanation    Error! Footer mismatch from header!. Failed to install downloaded s/w.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %UPDATE-4-GET_PRIORITY_FAIL: Failed to get the priority of the 
process. Defaulting to 0.Process name: Execute Script 

Explanation    Failed to get the priority of the process. Defaulting to 0.Process name: Execute Script

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %UPDATE-3-IMAGE_CORRUPT: Invalid data length [hex]. Image file is 
corrupted!. 

Explanation    Invalid data length. Image file is corrupted!.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %UPDATE-3-INCMPLT_READ: Warning: Truncated read: Still [dec] bytes 
left to read. 

Explanation    Warning: A file read operation did not complete. The file may be corrupt.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %UPDATE-3-INCMPLT_WRITE: Warning: Truncated write. Error writing chunk 
size [dec], len left = [dec], total len = [dec]. 

Explanation    Warning: Truncated write. Error while writing to file.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %UPDATE-3-INIT_TLV_FAIL: Error [dec] installing Temporal Logic 
Verifier (TLV). Failed to install downloaded s/w. 

Explanation    Error installing Temporal Logic Verifier (TLV). Failed to install downloaded s/w.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %UPDATE-4-INV_EXT: Warning: Unknown File Type, extension: [chars]. 

Explanation    Warning: Unknown File extension.

Recommended Action    No action is required.

Error Message    %UPDATE-3-INV_FILE_SIGN: Error! Invalid image signature!. Image may be 
corrupt. 

Explanation    Error! Invalid image signature!. Image may be corrupt.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %UPDATE-3-INV_FOOTER_OFF: Footer offset ([dec]) past end of file 
([dec] bytes). Sanity check failed on downloaded file. 

Explanation    Footer offset past end of file. Sanity check failed on downloaded file.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %UPDATE-3-INV_SIGN: Invalid signature type: [hex]. Image file may be 
corrupted. 

Explanation    Invalid signature type. Image file may be corrupted.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %UPDATE-3-INV_TLV: Unknown Temporal Logic Verifier (TLV) code [dec] - 
ignored. 

Explanation    Unknown Temporal Logic Verifier (TLV) code - ignored.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %UPDATE-3-LICENSE_LOAD_FAIL: Failed to load license file [chars]. rc 
= [dec]. 

Explanation    Failed to load license file.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %UPDATE-3-MEM_MAP_FAIL: Unable to map to a shared file.File name: 
[chars]. [chars]. 

Explanation    Unable to map to a shared file.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %UPDATE-3-RAMDISK_5MB_FAIL: Error while loading webauth bundle. Could 
not create ramdisk of 5 MB. File name: [chars] 

Explanation    Error while loading webauth bundle. Could not create ramdisk of 5 MB.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %UPDATE-3-RATE_DISABLE_FAIL: Failed to disable rate limiter in the NPU 

Explanation    Failed to disable rate limiter in the NPU

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %UPDATE-3-RATE_ENABLE_FAIL: Failed to enable rate limiter in the NPU 

Explanation    Failed to enable rate limiter in the NPU

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %UPDATE-3-RULE_DEL_FAIL: Failed to delete tftp rule for pHost=[chars] 
pFilename=[chars] rc2 = [dec] 

Explanation    Failed to delete a tftp rule.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %UPDATE-0-SEM_CREATE_FAIL: Couldn't create flash access semaphore. 
Internal system error. 

Explanation    Couldn't create flash access semaphore. Internal system error.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %UPDATE-3-SEM_GIVE_FAIL: Failed to unlock the Tftp task. Tftp 
sub-system malfunctioning. 

Explanation    Failed to unlock the Tftp task. Tftp sub-system malfunctioning.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %UPDATE-3-SEM_TAKE_FAIL: Failed to lock on the Tftp task. Tftp 
sub-system malfunctioning. 

Explanation    Failed to lock on the Tftp task. Tftp sub-system malfunctioning.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %UPDATE-4-SET_PRIORITY_FAIL: Failed to set process priority. Process 
name: Execute script. 

Explanation    Failed to set process priority. Process name: Execute script.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %UPDATE-0-TASK_CREATE_FAIL: Failed to create a task. Task Name: 
XFER_BLINK 

Explanation    Failed to create a task. Task Name: XFER_BLINK

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %UPDATE-3-UNTAR_CMD_FAIL: Error during untar of webauth bundle. Tar 
returned [dec]. 

Explanation    Error during untar of webauth bundle.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

USMDB Messages

This section contains usmDb API (USMDB) messages.

Error Message    %USMDB-3-MSGTAG001: usmDbAclSwapRuleIndex: The two indices, [dec], are 
the same. 

Explanation    usmDbAclSwapRuleIndex: The two indices, [dec], are the same.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %USMDB-3-MSGTAG002: usmDbAclSwapRuleIndex: ACL [chars] or rule [dec] 
does not exist. 

Explanation    usmDbAclSwapRuleIndex: ACL [chars] or rule [dec] does not exist.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %USMDB-3-MSGTAG003: usmDbAclSwapRuleIndex: ACL [chars] or rule [dec] 
does not exist. 

Explanation    usmDbAclSwapRuleIndex: ACL [chars] or rule [dec] does not exist.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %USMDB-3-MSGTAG004: invalid arg(s) passed to usmDbCertsWebadminNameGet 

Explanation    invalid arg(s) passed to usmDbCertsWebadminNameGet

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %USMDB-3-MSGTAG005: invalid arg(s) passed to usmDbCertsWebauthNameGet 

Explanation    invalid arg(s) passed to usmDbCertsWebauthNameGet

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %USMDB-3-MSGTAG006: Cannot add Mobility Member, duplicate IP, Saved 
Member:[hex]:[hex]:[hex]:[hex]:[hex]:[hex] 
Member:[hex]:[hex]:[hex]:[hex]:[hex]:[hex], IP: [dec].[dec].[dec].[dec] 

Explanation    Cannot add Mobility Member, duplicate IP, Saved Member:[hex]:[hex]:[hex]:[hex]:[hex]:[hex] Member:[hex]:[hex]:[hex]:[hex]:[hex]:[hex], IP: [dec].[dec].[dec].[dec]

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %USMDB-6-MSGTAG007: Error on call to sysapiRegistryGet routine with 
keyUDI_PID. 

Explanation    Error on call to sysapiRegistryGet routine with keyUDI_PID.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %USMDB-6-MSGTAG008: Error on call to sysapiRegistryGet routine with 
keyUDI_VID. 

Explanation    Error on call to sysapiRegistryGet routine with keyUDI_VID.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %USMDB-3-MSGTAG009: Error on call to sysapiRegistryGet routine with 
keySLOT_DATA_STRUCT. 

Explanation    Error on call to sysapiRegistryGet routine with keySLOT_DATA_STRUCT.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %USMDB-3-MSGTAG010: Error on call to sysapiRegistryGet routine with 
keyPORT_DATA_STRUCT. 

Explanation    Error on call to sysapiRegistryGet routine with keyPORT_DATA_STRUCT.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %USMDB-3-MSGTAG011: Error on call to sysapiRegistryGet routine with 
keySLOT_DATA_STRUCT. 

Explanation    Error on call to sysapiRegistryGet routine with keySLOT_DATA_STRUCT.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %USMDB-3-MSGTAG012: Error on call to sysapiRegistryGet routine with 
keyPORT_DATA_STRUCT. 

Explanation    Error on call to sysapiRegistryGet routine with keyPORT_DATA_STRUCT.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %USMDB-3-MSGTAG013: Error on call to sysapiRegistryGet routine with 
keySLOT_DATA_STRUCT. 

Explanation    Error on call to sysapiRegistryGet routine with keySLOT_DATA_STRUCT.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %USMDB-3-MSGTAG014: Error on call to sysapiRegistryGet routine with 
keyPORT_DATA_STRUCT. 

Explanation    Error on call to sysapiRegistryGet routine with keyPORT_DATA_STRUCT.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %USMDB-3-MSGTAG015: Error on call to sysapiRegistryGet routine with 
keySLOT_DATA_STRUCT. 

Explanation    Error on call to sysapiRegistryGet routine with keySLOT_DATA_STRUCT.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %USMDB-3-MSGTAG016: Failed to open [chars] 

Explanation    Failed to open [chars]

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %USMDB-3-MSGTAG017: Couldn't create flash write semaphore. 

Explanation    Couldn't create flash write semaphore.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %USMDB-6-MSGTAG018: Setting hardware time to [dec] [dec] [dec] 
[dec]:[dec]:[dec] 

Explanation    Setting hardware time to [dec] [dec] [dec] [dec]:[dec]:[dec]

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %USMDB-3-MSGTAG019: unabled to work out gmtime. 

Explanation    unabled to work out gmtime.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %USMDB-4-MSGTAG020: usmDbTimeGet:Buffer supplied too small [dec]<27 
bytes 

Explanation    usmDbTimeGet:Buffer supplied too small [dec]<27 bytes

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %USMDB-4-MSGTAG021: usmDbWcpGet6kTableChecksum(): Non-Doberman 
platform. 

Explanation    usmDbWcpGet6kTableChecksum(): Non-Doberman platform.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %USMDB-4-MSGTAG022: usmDbWcpGetControllerSlotPort(): Non-Doberman 
platform. 

Explanation    usmDbWcpGetControllerSlotPort(): Non-Doberman platform.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %USMDB-4-MSGTAG023: usmDbWcpGetPeersPortAndIp(): Non-Doberman 
platform. 

Explanation    usmDbWcpGetPeersPortAndIp(): Non-Doberman platform.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %USMDB-4-MSGTAG024: usmDbWcpControllerExists(): Non-Doberman 
platform. 

Explanation    usmDbWcpControllerExists(): Non-Doberman platform.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %USMDB-4-MSGTAG025: usmDbWcpGetNextController(): Non-Doberman 
platform. 

Explanation    usmDbWcpGetNextController(): Non-Doberman platform.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %USMDB-4-MSGTAG026: usmDbWcpGetControllerIPAddress(): Non-Doberman 
platform. 

Explanation    usmDbWcpGetControllerIPAddress(): Non-Doberman platform.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %USMDB-4-MSGTAG027: usmDbWcpGetParentRouterName(): Non-Doberman 
platform. 

Explanation    usmDbWcpGetParentRouterName(): Non-Doberman platform.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %USMDB-4-MSGTAG028: LAG in transition.switch reboot DUE..!!! 

Explanation    LAG in transition.switch reboot DUE..!!!

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %USMDB-3-MSGTAG029: License operation failed with rc : [chars]..!!!  

Explanation    License operation failed!!!

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

WCP Messages

This section contains Wireless Control Protocol (WCP) messages.

Error Message    %WCP-3-BUFF_ALLOC_FAILED: Out of System buffers. 

Explanation    Out of System buffers.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %WCP-3-BUFF_INVALID: The message buffer received for processing is 
invalid. 

Explanation    The message buffer received for processing is invalid.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %WCP-3-BUFF_LEN_LOW: The length of the buffer [dec] bytes,is not enough 
to hold the data of size [dec] bytes. 

Explanation    The length of the buffer is not enough to hold the data.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %WCP-0-CREAT_MUTEX_FAILED: Failed to Create SNMP mutex for WCP task. 

Explanation    Failed to Create SNMP mutex for WCP task.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %WCP-0-CREAT_TASK_FAILED: Failed to Create WCP Task. 

Explanation    Failed to Create WCP Task.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %WCP-3-DISABLE_VAP_FAILED: Failed to disable the Wlans associated with 
the interface [chars]. 

Explanation    Failed to disable the Wlans associated with the interface.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %WCP-3-GET_ADMINSTATE_ERR: Failed to get the admin state for the 
interface [dec]. 

Explanation    Failed to get the admin state for a specified interface.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %WCP-3-GET_GATEWAY_FAILED: Failed to get the gateway for the interface 
[chars]. 

Explanation    Failed to get the gateway for an interface.

Explanation    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %WCP-3-GET_IPADDR_FAILED: Failed to get the IP address for the 
interface [chars]. 

Explanation    Failed to get the IP address for an interface.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %WCP-3-GET_MASK_FAILED: Failed to get the net mask for the interface 
[chars]. 

Explanation    Failed to get the net mask for an interface.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %WCP-3-GET_VLAN_FAILED: Failed to get the vlan id for the interface 
[chars]. 

Explanation    Failed to get the vlan id for an interface.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %WCP-3-INTERNAL_INTF_NUM_ERR: Failed to get the first available 
internal interface number. 

Explanation    Failed to get the first available internal interface number.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %WCP-3-INVALID_REQ_TYPE: Controller got request for invalid TLV type 
[chars]. 

Explanation    Controller got request for invalid TLV type.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %WCP-3-INVALID_SLOT_PORT: The next valid slot and port cannot be 
retrieved for the slot [dec] and port [dec] 

Explanation    The next valid slot and port cannot be retrieved.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %WCP-3-IOCTL_FAILED: The ioctl system call failed for the option 
[chars]. 

Explanation    The ioctl system call failed.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %WCP-3-KEEPALIVE_LOST: Lost keepalives from [chars]. 

Explanation    Lost keepalives.Expected event on a socket did not occur.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %WCP-3-MGMT_GATEWAY_ILLEGAL: Management interface gateway [chars] is 
illegal. 

Explanation    Management interface gateway is illegal.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %WCP-3-MGMT_IP_ILLEGAL: Management interface IP address [chars] is 
illegal. 

Explanation    Management interface IP address is illegal.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %WCP-3-MGMT_NETMASK_ILLEGAL: Management interface netmask [chars] is 
illegal. 

Explanation    Management interface netmask is illegal.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %WCP-3-MSG_LEN_ZERO: The message received for processing has zero 
length. 

Explanation    The message received for processing has zero length.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %WCP-3-MSG_TYPE_UNKNOWN: Unknown message type [dec] received for 
processing. 

Explanation    Unknown message type received for processing by WCP task.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %WCP-3-PDU_TRANSMIT_FAILED: Failed to transmit the PDU for the command 
[chars].Return code:[dec]. 

Explanation    Failed to transmit the WCP PDU to the SCP.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %WCP-3-SEM_TAKE_FAILED: Could not take a semaphore lock on the global 
snmp structure. 

Explanation    could not take a semaphore lock on the global snmp structure.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %WCP-3-SET_IPADDR_FAILED: Failed to set IP address for the interface 
[chars]. 

Explanation    Failed to set the IP address for an interface.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %WCP-3-SET_VLAN_FAILED: Failed to set vlan ID for the interface 
[chars]. 

Explanation    Failed to set the vlan ID for an interface.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %WCP-3-SOCK_CREAT_FAILED: Failed to create a datagram socket. 

Explanation    Failed to create a datagram socket.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %WCP-3-SOCK_OPT_FAILED: Failed to set the socket option [chars]. 

Explanation    Failed to set the socket option.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %WCP-3-SOCK_RECV_FAILED: Failed to receive a packet from ip address 
[chars]: port [dec]. 

Explanation    Failed to receive a packet on a socket.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %WCP-3-SOURCE_INVALID: The message buffer received for processing is 
from an invalid source. 

Explanation    The message buffer received for processing is from an invalid source.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %WCP-7-WCP_PORT_BOUND: WCP task is bound to port number [dec]. 

Explanation    Port number to which wcp task is bound to is displayed

Recommended Action    No action is required.

Error Message    %WCP-7-WCP_PROCESS_ERROR: wcp process error: The function [chars] 
failed. 

Explanation    wcp process error.

Recommended Action    No action is required.

WEB Messages

This section contains web (WEB) messages.

Error Message    %WEB-3-FORM_SUBMIT_FAILED: Form submission failed for file:[chars]. No 
action taken. 

Explanation    Form submit action failed on the HTML file.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %WEB-3-INVALID_ACCESS_LEVEL: Access level is invalid for SNMPv3 user 
[chars]. 

Explanation    Access level is invalid for this SNMPv3 user.

Recommended Action    If this message recurs, copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %WEB-3-INVALID_AP_KEY: Invalid AP Hash Key Provided 

Explanation    Invalid AP Hash Key.

Recommended Action    If this message recurs, copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %WEB-3-INVALID_AUTH_PROTO: Invalid authentication protocol for SNMPv3 
user [chars]. 

Explanation    Authentication protocol is invalid for SNMPv3 user.

Recommended Action    If this message recurs, copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %WEB-3-INVALID_NLS_TOKEN: NLS String [[dec]] Not Found. 

Explanation    NLS string not found.

Recommended Action    If this message recurs, copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %WEB-3-INVALID_PRIV_PROTO: Unknown privacy protocol for SNMPv3 user 
[chars]. 

Explanation    Unknown privacy protocol for SNMPv3 user.

Recommended Action    If this message recurs, copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %WEB-3-INVALID_TFTP_DNLDCODE: TFTP download failed with unknown 
failure code. 

Explanation    TFTP download failed. Failure code unknown.

Recommended Action    If this message recurs, copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %WEB-3-INVALID_USERNAME: EwsContext cachedUsername is empty! 

Explanation    Cached user name is empty.

Recommended Action    If this message recurs, copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %WEB-3-LOCAL_AUTH_FAILED: # (prty_order_local_auth.html) Form 
Submission Failed. NoAction Taken.. 

Explanation    # (prty_order_local_auth.html) Form Submission Failed. NoAction taken.

Recommended Action    If this message recurs, copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %WEB-3-NLS_LIST_NOT_FOUND: NLS List [[chars]] not found. 

Explanation    NLS List not found.

Recommended Action    If this message recurs, copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %WEB-3-NLS_STR_NOT_FOUND: NLS String [[dec]] Not Found for Key: 
[chars] 

Explanation    NLS String not found.

Recommended Action    If this message recurs, copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %WEB-3-PARTY_ORDER_NET_FAILED: # (prty_order_net.html) Form 
Submission Failed. No ActionTaken.. 

Explanation    # (prty_order_net.html) Form Submission Failed. No Actiontaken.

Recommended Action    If this message recurs, copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %WEB-3-USDB_SAVE_FAILED: The Local Users Database could not be saved 
to flash. 

Explanation    Local Users Database could not be saved to flash.

Recommended Action    If this message recurs, copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %WEB-3-USER_NOT_PRIVILEDGED: Form Submission Failed. The user doesn't 
have the right privileges. 

Explanation    Form Submission Failed. User doesn't have the right privileges.

Recommended Action    If this message recurs, copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

WPS Messages

This section contains wireless protection policy (WPS) messages.

Error Message    %WPS-6-CONVERT_OLD_SIG_TO_NEW: Old version of signature configuration 
file detected. 

Explanation    Warning: old version of signature configuration file detected. Convert it to the new format.

Recommended Action    This is a debug message only. No action is required.

Error Message    %WPS-3-ERR_OPEN_SIG: Error opening new sig file 

Explanation    Error opening new signature file

Recommended Action    Please make sure the signature file is downloaded properly.

Error Message    %WPS-3-ERROR_MASK_NON_HEX: mask string [chars] has non-Hex digits 

Explanation    mask string has the non-Hex digits

Recommended Action    Please specify a mask string which is of Hex digits

Error Message    %WPS-3-ERROR_PARSE_CST_SIG: Error parsing custom sig file. 

Explanation    Error parsing custom signature file.

Recommended Action    Try to re-download a new custom signature file to the system again.

Error Message    %WPS-3-ERROR_PARSE_SIG_LINE: Error parsing at line [dec] of new sig 
file 

Explanation    Error parsing at line of new signature file

Recommended Action    Please ensure the signature line in question is of proper syntax.

Error Message    %WPS-3-ERROR_PARSE_STD_SIG_FILE: Error parsing standard sig file. 

Explanation    Error parsing standard signature file.

Recommended Action    Try to re-download a new standard signature file to the system again.

Error Message    %WPS-3-ERROR_PATTERN_NON_HEX: pattern string [chars] has non-Hex 
digits 

Explanation    pattern string has the non-Hex digits

Recommended Action    Please specify a pattern string which is of Hex digits

Error Message    %WPS-3-ERROR_RETRIEVE_FILE: Error reading file [chars] from flash 

Explanation    Error retrieving file from flash

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %WPS-3-ERROR_SEND_SIG_ADD: Error sending sig Add message to LWAPP 

Explanation    Error sending signature Add message to LWAPP

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %WPS-3-ERROR_SEND_SIG_DISABLE_MSG: Error sending sig disable message 
to LWAPP 

Explanation    Error sending signature disable message to LWAPP

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %WPS-3-ERROR_SEND_SIG_ENABLE_MSG: Error sending sig enable message to 
LWAPP 

Explanation    Error sending signature enable message to LWAPP

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %WPS-3-ERR_PARSE_REV: Error parsing revision number 

Explanation    Error parsing signature revision number

Recommended Action    The revision number has to be 1

Error Message    %WPS-3-ERR_RD_LN: Error reading line [dec] from new sig file 

Explanation    Error reading line from new signature file

Recommended Action    Please ensure the signature line in question is of proper syntax.

Error Message    %WPS-3-ERR_READ_SIG_REV: Error reading sig revision number 

Explanation    Error reading signature revision number

Recommended Action    Please specify revision number at the 1st line of the signature file.

Error Message    %WPS-3-FAIL_MERGE_SIG: unable to merge rev [chars] sig with existing 
sig 

Explanation    unable to merge signatures with existing signatures

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %WPS-3-FAIL_NOTIFY_LWAPP_SIG_FILE: Unable to notify LWAPP of new sig 
file 

Explanation    Unable to notify LWAPP of new signature file

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %WPS-6-IDS_TOKEN_INTERVAL_DEF: Sig Interval set to default 

Explanation    Signature Interval set to default

Recommended Action    No action is required.

Error Message    %WPS-3-INVALID_SIG_TOKEN: Invalid sig token [chars] 

Explanation    Invalid signature token

Recommended Action    Please correct the signature token which is invalid

Error Message    %WPS-3-INV_VER: Error invalid version [chars] 

Explanation    Error signature invalid version

Recommended Action    The revision number has to be 1

Error Message    %WPS-4-MFP_INVALID_EVENT_TYPE: MFP Ignoring invalid event type ([int]) 
from [hex]:[hex]:[hex]:[hex]:[hex]:[hex]  

Explanation    MFP Ignores invalid event type

Recommended Action    This is a debug message only. No action is required.

Error Message    %WPS-3-MFP_LINK_MISSING: MFP Missing link at the [chars] of table 

Explanation    MFP is missing link in the table

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %WPS-0-MFP_STAT_NO_QUEUE: MFP Stats task has no queue 

Explanation    MFP Statistics task has no queue

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %WPS-3-MFP_UNLINK_ERR: MFP Can't unlink entry from table 

Explanation    MFP Cannot unlink entry from table

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %WPS-3-MISSING_SIG_TOKEN: Missing token, the symbol parsed=[chars] 

Explanation    signature token is missing

Recommended Action    Please correct the signature token which is missing

Error Message    %WPS-3-NO_SIG_REV: Sig file does not have revision number 

Explanation    Signature file does not have revision number

Recommended Action    Please specify the revision number at the 1st line of the signature file, which has to be of value 1

Error Message    %WPS-3-NO_VALUE_SIG_TOKEN: No value specified for token [chars] 

Explanation    No value is specified for the signature token

Recommended Action    Please specify the value for the token in question.

Error Message    %WPS-3-READ_SIG_FILE_FAIL: Error reading line [dec] of new signature 
file 

Explanation    Cannot read a new signature file

Recommended Action    Check the signature file on the line in question to ensure it's in proper syntax.

Error Message    %WPS-4-SIG_ALARM_OFF: AP [hex]:[hex]:[hex]:[hex]:[hex]:[hex] : Alarm 
OFF, [chars] sig [chars], track=[chars] preced=[dec] hits=[dec] slot=[dec] 
channel=[dec] 

Explanation    Signature Alarm Off

Recommended Action    This is a debug message only. No action is required.

Error Message    %WPS-4-SIG_ALARM_OFF_CONT: ...continue, source mac= 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    ...continue, Signature Alarm Off

Recommended Action    This is a debug message only. No action is required.

Error Message    %WPS-3-SIG_PTRN_DEL_NUM_INV: illegal number of pattern delimiters 
[chars]. 

Explanation    invalid number of pattern delimiters

Recommended Action    The maximal delimiter number is 3.

Error Message    %WPS-3-SIG_PTRN_INV: invalid pattern [chars] in Version 1 signature. 

Explanation    invalid signature pattern

Recommended Action    Please correct the signature pattern in question

Error Message    %WPS-3-SIG_PTRN_INV_OFF: invalid offset [chars] in Version 1 signature 

Explanation    invalid signature pattern offset

Recommended Action    Please specify the right pattern offset

Error Message    %WPS-3-SIG_PTRN_INV_OFF_MAX: offset [chars] in Version 1 signature too 
big; max value = [dec] 

Explanation    invalid signature pattern offset value

Recommended Action    Please specify the right pattern ffset value

Error Message    %WPS-3-SIG_PTRN_INV_OFF_STRT_D: invalid pattern offset Start value 
[dec] in Version 1 signature 

Explanation    invalid signature pattern offset Start

Recommended Action    Please specify the right offset start value

Error Message    %WPS-3-SIG_PTRN_INV_OFF_STRT_S: invalid pattern offset Start value 
[chars] in Version 1 signature 

Explanation    invalid signature pattern offset Start

Recommended Action    Please specify the right offset start value

Error Message    %WPS-3-SIG_PTRN_LEN_OVER: pattern string cannot specify more than 
[dec] octets in Version 1 signatures 

Explanation    pattern string length too big

Recommended Action    Please specify the right pattern string.

Error Message    %WPS-3-SIG_PTRN_MASK_EQ: pattern string and mask must be of equal 
length in Version 1 signatures 

Explanation    pattern string and mask must be of equal length

Recommended Action    pattern string and mask must be of equal length

Error Message    %WPS-3-SIG_PTRN_MASK_EVEN: pattern string and mask must have an even 
number of bytes in Version 1 signatures 

Explanation    pattern string and mask must have an even number of bytes

Recommended Action    pattern string and mask must have an even number of bytes

Error Message    %WPS-3-SIG_PTRN_MASK_NULL: pattern string and mask have no any bytes 
specified 

Explanation    pattern string and mask do not have any bytes specified

Recommended Action    Please specify pattern and mask

Error Message    %WPS-3-SIG_PTRN_MASK_STR_INV: [chars] string [chars] has non-Hex 
digits 

Explanation    invalid signature pattern or mask string. It has non-Hex digits.

Recommended Action    The signature pattern or mask string must have Hex digits

Error Message    %WPS-3-SIG_PTRN_MISSING: invalid pattern [chars] in Version 1 
signature: missing [chars]. 

Explanation    invalid signature pattern

Recommended Action    Please correct the signature pattern in question

Error Message    %WPS-3-SIG_PTRN_PARSE_FAIL: Error parsing pattern [chars] in Version 
1 signature 

Explanation    Error parsing token pattern

Recommended Action    Please specify the right pattern

Error Message    %WPS-3-SIG_STR_INV: [chars] string must begin with '0x' in Version 1 
signatures 

Explanation    invalid signature pattern

Recommended Action    Please specify the right signature pattern

Error Message    %WPS-3-SIG_TOKEN_DUP: Sig [chars] must be unique, the '[chars]' 
repeats 

Explanation    Signature token is not unique.

Recommended Action    Please specify unique signature token.

Error Message    %WPS-3-SIG_TOKEN_DUP_PRECED: Sig precedence must be unique, the [dec] 
repeats 

Explanation    Signature token precedence is not unique.

Recommended Action    Please specify unique precedence ID.

Error Message    %WPS-3-SIG_TOKEN_NUM_INV: Version 1 sig cannot have more than [dec] 
tokens per line 

Explanation    Version 1 signatures cannot have more than 15 tokens per line

Recommended Action    Please specify a signature less than 15 tokens.

Error Message    %WPS-3-SIG_TOKEN_WRONG_SIGID: Sig Id   [dec] is not valid  

Explanation    Signature token SigId is not valid.

Recommended Action    Please specify valid SigId.

Error Message    %WPS-3-SIG_VER_UNSUP: Signature version number [chars] is unsupported 

Explanation    Signature version number is unsupported

Recommended Action    The revision number has to be 1

Error Message    %WPS-3-TOKEN_MISSING_INVALID: Missing or invalid '[chars]' token in 
Version 1 sig 

Explanation    Missing or invalid token in Version 1 signature

Recommended Action    Please correct the invalid token in the

Error Message    %WPS-3-TOKEN_PARSE_FAIL: Error processing '[chars]' token in Version 
1 signature 

Explanation    Signature token processing failed

Recommended Action    Please correct the token in question

Error Message    %WPS-3-TYPE_TOKEN_INV_GT: In Version 1 signatures, '[chars]' can not 
have a value greater than [dec] 

Explanation    Signature token value is invalid

Recommended Action    Please specify the right value fr the token in question

Error Message    %WPS-3-TYPE_TOKEN_INV_VAL1: In Version 1 signatures, '[chars]' can 
only have value [chars] 

Explanation    Signature token value is invalid

Recommended Action    Please specify the right value for the token in question

Error Message    %WPS-3-TYPE_TOKEN_INV_VAL2: In Version 1 signatures, '[chars]' can 
only have value [chars] or [chars] 

Explanation    Signature token value is invalid

Recommended Action    Please specify the right value for the token in question

Error Message    %WPS-3-TYPE_TOKEN_INV_VAL3: In Version 1 signatures, '[chars]' can 
only have value [chars], [chars], or [chars] 

Explanation    Signature token value is invalid

Recommended Action    Please specify the right value for the token in question

Error Message    %WPS-4-UNSUPPORT_SIG_VER: Unsupported sig version on line [dec], 
ignoring signature 

Explanation    Unsupported signature version, ignoring signature

Recommended Action    The revision number has to be 1

Error Message    %WPS-3-VER_NOT_FOUND: Error version number not found 

Explanation    Error signature version number not found

Recommended Action    Please specify a revision number which has to be of value 1

Error Message    %WPS-3-VER_NUM_MISSING_INVALID: Error at line [dec] of new signature 
file: version number is missing or invalid 

Explanation    version number is missing or invalid

Recommended Action    Please specify the revision number at the 1st line of the signature file, which has to be of value 1