Cisco Wireless LAN Controller System Message Guide
AAA through ACL
Downloads: This chapterpdf (PDF - 445.0KB) The complete bookPDF (PDF - 15.88MB) | Feedback

System Messages

Table Of Contents

System Messages

AAA Messages

ACL Messages


System Messages


AAA Messages

This section contains authentication, authorization, and accounting (AAA) messages.

Error Message    %AAA-5-AAA_AUTH_ADMIN_USER: Authentication [chars] for admin user 
'[chars]' 

Explanation    Authentication for an admin user.

Recommended Action    No action is required.

Error Message    %AAA-5-AAA_AUTH_NETWORK_USER: Authentication [chars] for network user 
'[chars]' 

Explanation    Authentication for a network user.

Recommended Action    No action is required.

Error Message    %AAA-4-ATTRITBUTE_LEN_EXCEED: ACL Name too long : [chars] 

Explanation    ACL Name too long.

Recommended Action    No action is required.

Error Message    %AAA-4-AVP_CORRUPT: [dec]th AVP is corrupted. RADIUS msgtype=[dec]. 
Prev AVP=[dec]len=[dec] offset=[dec] numAVPs=[dec].. 

Explanation    An AVP is corrupted.

Recommended Action    No action is required.

Error Message    %AAA-4-COMPUTE_AVP_SIZE_FAILED: Received bad AVP :[address] , Value 
Ptr =[address], Value Len=[dec]. 

Explanation    Received bad AVP.

Recommended Action    No action is required.

Error Message    %AAA-3-CONSTRUCT_UDP_RCV_SOCKET_FAILED: Could not construct UDP RCV 
socket. [chars].([dec]:[chars])  

Explanation    Could not construct UDP RCV socket.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %AAA-4-COPY_AVP_BLOCK_FAILED: Could not copy AVPs to block. [chars] 

Explanation    Could not copy AVP to block.

Recommended Action    No action is required.

Error Message    %AAA-6-CREATE_AVL_TREE: Creating AVL tree with [dec] entries 

Explanation    Creating AVL tree with entries.

Recommended Action    No action is required.

Error Message    %AAA-6-CREATE_CONFIG_FILE: Creating default aaaFile.cfg 

Explanation    Creating default an entity on local database.

Recommended Action    No action is required.

Error Message    %AAA-4-CREATE_RADIUS_MES_FAILED: Could not create RADIUS message. 
[chars]. numAVPs:[dec]. 

Explanation    Could not create RADIUS message.

Recommended Action    No action is required.

Error Message    %AAA-3-CREATE_USR_TREE_FAILED: Could not create user AVL tree. 
Resason:[chars]. 

Explanation    Could not create user AVL tree.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %AAA-6-DB_ADD_BLACKLIST_USR: Adding blacklist user '[chars]' to AAA 
database. 

Explanation    Adding a blacklist user to AAA database.

Recommended Action    No action is required.

Error Message    %AAA-6-DB_ADD_USER: Adding user '[chars]' to AAA database. 

Explanation    Adding an user to AAA database.

Recommended Action    No action is required.

Error Message    %AAA-3-DB_INIT_FAILED: Error [dec] initializing database module 
[chars]. 

Explanation    Error initializing database module.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %AAA-3-DB_MODULE_INIT_FAILED: Could not initialize module [chars]. 
[chars]. 

Explanation    Could not initialize a module.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %AAA-3-DB_RECORD_ADD_FAILED: Could not add record to database. 
[chars]. 

Explanation    Could not add record to database.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %AAA-6-DELETE_CLIENT_ACCOUNT_DELETED: Delete client 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex]because user account ([chars]) has been 
deleted.  

Explanation    The specified client was deleted because the user account was deleted.

Recommended Action    No action is required.

Error Message    %AAA-6-DELETE_CLIENT_GUEST_ACCOUNT_EXPIRE: Delete client 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex]because guest user account ([chars]) is 
expired 

Explanation    Delete client because guest user account expired

Recommended Action    No action is required.

Error Message    %AAA-3-EAPMETHOD_ADD_FAILED: Unable to add method '[chars]' to EAP 
profile for user '[chars]'. [chars]. 

Explanation    Unable to add a method to EAP profile for a particular user.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %AAA-3-EAPPROF_ADD_FAILED: Unable to add EAP profile for user 
'[chars]'. [chars]. 

Explanation    Unable to add EAP profile for a particular user.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %AAA-3-FREELIST_ADD_FAILED: Unable to add to free list. [chars]. 

Explanation    Unable to add to free list.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %AAA-3-FREELIST_DEL_FAILED: Unable to delete to free list. [chars]. 

Explanation    Unable to delete to free list.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %AAA-6-FUNC_RUNNING: Running [chars]... 

Explanation    Running.

Recommended Action    No action is required.

Error Message    %AAA-3-GET_GUEST_START_TIME_FAILED: Could not get start time for guest 
user record. [chars]. 

Explanation    Could not get start time for a guest user record.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %AAA-4-GET_RADIUS_PROXYSTATE_FAILED: Could not get proxy state. 
[chars]. 

Explanation    Could not get proxy state.

Recommended Action    No action is required.

Error Message    %AAA-6-GUEST_ACCOUNT_CREATE: Guest user account ([chars]) is created 
with lifetime ([dec]). 

Explanation    Guest user account created

Recommended Action    No action is required.

Error Message    %AAA-6-GUEST_ACCOUNT_EXPIRE: Guest user account ([chars]) is expired 

Explanation    Guest user account expired

Recommended Action    No action is required.

Error Message    %AAA-4-GUESTACCT_TIMERSET_FAILED: Unable to set timer for guest 
accounts. [chars]. 

Explanation    Unable to set timer for guest accounts.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %AAA-4-GUESTUSER_DEL_FAILED: Unable to delete the user '[chars]'. 
[chars]. 

Explanation    Unable to delete a particular user from database.

Recommended Action    No action is required.

Error Message    %AAA-4-INVALID_AUTHENTICATOR: Unable to verify RADIUS message 
authenticator for mobile[hex]:[hex]:[hex]:[hex]:[hex]:[hex]. [chars] 

Explanation    Invalid RADIUS message authenticator for mobile.

Recommended Action    No action is required.

Error Message    %AAA-4-INVALID_AUTH_REQ_TYPE: Invalid RADIUS authentication type [int] 
in AAA request 

Explanation    Invalid RADIUS authentication type in AAA request

Recommended Action    No action is required.

Error Message    %AAA-4-INVALID_DATA_STRUCT: Could not validate the data structure - 
[chars]. 

Explanation    Could not validate a data structure.

Recommended Action    No action is required.

Error Message    %AAA-4-INVALID_MESSAGE_AUTHENTCATOR: Invalid message authenticator 
received in [chars] from[dec].[dec].[dec].[dec] 

Explanation    Invalid message authenticator received.

Recommended Action    No action is required.

Error Message    %AAA-4-INVALID_RADIUS_PKT_SIZE: RADIUS packet too small. 

Explanation    RADIUS packet is less than its minimum size.

Recommended Action    No action is required.

Error Message    %AAA-3-INVALID_REQUEST: Invalid AAA request. [chars] 

Explanation    AAA request with null or invalid payload

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %AAA-4-INVALID_REQUEST_TYPE: Received an invalid request type.([hex]). 

Explanation    Received an invalid request type. Not AAA or accounting.

Recommended Action    No action is required.

Error Message    %AAA-3-LDAP_CONNECT_SERVER_FAILED: LDAP DB Task [[dec]]: Connect to 
server failed (retry [dec]), rc= [dec] ([chars]) 

Explanation    LDAP DB Task connect to server failed.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %AAA-3-LDAP_COPY_ATTR_FAILED: Could not copy attributes returned by 
LDAP server. [chars]. Max AVPs: [int]. Max Ints: [dec]. 

Explanation    Could not copy attributes returned by LDAP server.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %AAA-4-LDAPMSG_SEND_FAILED: Could not send a message to LDAP task. 
[chars]. 

Explanation    Could not send a message to LDAP task.

Recommended Action    No action is required.

Error Message    %AAA-3-LDAP_TASK_FAILED: The main LDAP task failed. [chars]. Index: 
[dec]. Type: [dec]. 

Explanation    The main LDAP task failed.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %AAA-3-LDAP_TIMER_CALLBACK_FAILED: Could not perform timer callback. 
[chars]. 

Explanation    Could not perform timer callback.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %AAA-3-LIFETIME_SET_FAILED: Unable to reset the lifetime of [chars] 
account [chars] in localdatabase. 

Explanation    Unable to reset the lifetime of an account in localdatabase.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %AAA-4-LIFETIME_VALUE_CORRUPT: Corrupted value of lifetime for guest 
user [chars]. 

Recommended Action    Corrupted value of lifetime for a guest user.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %AAA-3-MEM_ALLOC_FAILED: Error allocating [dec] bytes on stack for 
message. Aborting.. 

Explanation    Error allocating memory off stack for message. Aborting.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %AAA-4-MESSAGE_TYPE_UNKNOWN: Unable to send AAA request, Unknown 
message type :[dec] 

Explanation    Unable to send AAA request, Unknown message type.

Recommended Action    No action is required.

Error Message    %AAA-4-MSCB_NOT_FOUND: Unable to find Mobile Station Entry for 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] . 

Explanation    Unable to find Mobile Station Entry.

Recommended Action    No action is required.

Error Message    %AAA-4-MSG_RECV_FAILED: Failed to receive an incoming message. Error 
= [dec]:[chars]. 

Explanation    Failed to receive an incoming message.

Recommended Action    No action is required.

Error Message    %AAA-4-PROCESS_ACC_FAILED: Could not process accounting type [hex]. 
[chars].  

Explanation    Could not process an accounting type.

Recommended Action    No action is required.

Error Message    %AAA-4-PROC_PROXY_REQ_FAILED: Could not process proxy request. 
[chars]. RADIUSLength=[dec] , Transport Len =[dec], Message code=[dec]. 

Explanation    Could not process proxy request.

Recommended Action    No action is required.

Error Message    %AAA-4-PROC_PROXY_RESP_FAILED: Could not process a proxy RADIUS 
response. [chars]. RADIUS Length=[dec], Transport Length=[dec], Message 
Code=[dec]. 

Explanation    Could not process RADIUS response.

Recommended Action    No action is required.

Error Message    %AAA-4-PROC_RADIUS_RESP_FAILED: Could not process RADIUS response. 
[chars]. ResponseLength: [dec], Server: [dec].[dec].[dec].[dec] , ID:[dec] , 
Mobile:[hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Could not process RADIUS response.

Recommended Action    No action is required.

Error Message    %AAA-3-PROXY_REQ_VALID_CRED_FAILED: Could not validate proxied request 
credentials. [chars].STA: [hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Could not validate proxied request credentials.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %AAA-4-RADACCTSRVR_STATESET_FAILED: Unable to set state of RADIUS 
accounting server [dec] to [dec]. [chars]. 

Explanation    Unable to set the state of a particular RADIUS accounting server.

Recommended Action    No action is required.

Error Message    %AAA-4-RADAUTHSRVR_STATESET_FAILED: Unable to set state of RADIUS 
authentication server [dec] to [dec]. [chars]. 

Explanation    Unable to set the state of a particular RADIUS authentication server.

Recommended Action    No action is required.

Error Message    %AAA-4-RADCLIENT_NOT_FOUND: RADIUS client [int].[int].[int].[int] not 
found in client list. 

Explanation    A RADIUS client is not found in client list.

Recommended Action    No action is required.

Error Message    %AAA-6-RADIUS_IN_GLOBAL_LIST: RADIUS server 
[int].[int].[int].[int]:[int] [chars] in global list 

Explanation    RADIUS server in global list.

Recommended Action    No action is required.

Error Message    %AAA-4-RADIUSMSG_SEND_FAILED: Unable to send RADIUS message to 
[chars]([int].[int].[int].[int]):[int] 
(MAC:[hex]:[hex]:[hex]:[hex]:[hex]:[hex]). Reason : [chars]. 

Explanation    Unable to send RADIUS message to a specific host.

Recommended Action    No action is required.

Error Message    %AAA-6-RADIUS_ON_WLAN: RADIUS server [int].[int].[int].[int]:[int] 
[chars] on WLAN [int] 

Explanation    RADIUS server on WLAN.

Recommended Action    No action is required.

Error Message    %AAA-4-RADIUS_RESPONSE_FAILED: RADIUS server 
[int].[int].[int].[int]:[int] failed to respond to request(ID [int]) for STA 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] / user '[chars]' 

Explanation    RADIUS server failed to respond to request for STA.

Recommended Action    No action is required.

Error Message    %AAA-4-RADIUS_RES_TRUNC: Truncating RADIUS response from server at AVP 
code [dec] for message [dec]  

Explanation    Truncating RADIUS response from server at AVP code for a message.

Recommended Action    No action is required.

Error Message    %AAA-4-RADSERVER_NOT_FOUND: Could not find appropriate RADIUS server 
for WLAN [dec] - [chars] 

Explanation    Client authentication failed because a valid RADIUS server could not be found to service the request.

Recommended Action    Verify RADIUS server configuration and connectivity.

Error Message    %AAA-4-RCV_FROM_UNKNOWN_SERVER: Received a [chars] from unknown server 
[int].[int].[int].[int]:[int] 

Explanation    Received a msg from unknown server.

Recommended Action    No action is required.

Error Message    %AAA-4-RCV_FROM_WRONG_PRT: RADIUS msg received from wrong switchport, 
[dec], dropping 

Explanation    RADIUS msg received from wrong switchport, dropping it.

Recommended Action    No action is required.

Error Message    %AAA-4-RCV_PKT_TO_RFC3576_PRT_FAILED: Received an unexpected [chars] 
from [dec].[dec].[dec].[dec] 

Explanation    Received an unexpected msg.

Recommended Action    No action is required.

Error Message    %AAA-4-REBUILD_DEFAULT_CONFIG: Rebuilding the default configuration 
for '[chars]' 

Explanation    Rebuilding the default configuration.

Recommended Action    No action is required.

Error Message    %AAA-6-RECREATE_ADMIN_LOGIN: Recreating admin login. 

Explanation    Recreating default admin login.

Recommended Action    No action is required.

Error Message    %AAA-6-RECREATE_ADMIN_USR: Recreated the admin user. 

Explanation    Recreated the admin user on local database.

Recommended Action    No action is required.

Error Message    %AAA-4-RFC3576_REXMT_FAILED: Could not retransmit RFC-3576 message to 
[int].[int].[int].[int]:[int]. [chars].  

Explanation    Could not retransmit RFC-3576 message to a particular host.

Recommended Action    No action is required.

Error Message    %AAA-3-RFC_SOCKET_ERROR: RFC3576 socket error [dec] on socket [dec] 

Explanation    RFC3576 socket error on a socket.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %AAA-4-SEND_AAA_RESPONSE_FAILED: Could not send AAA response. [chars]. 

Explanation    Could not send AAA response.

Recommended Action    No action is required.

Error Message    %AAA-4-SEND_RFC_RESPONSE_FAILED: Could not send RFC-3576 response. 
[chars].  

Explanation    Could not send RFC-3576 response.

Recommended Action    No action is required.

Error Message    %AAA-4-SEND_TPLUS_MES_FAILED: Could not send TACACS+ message. 
[chars].([dec]:[chars]). 

Explanation    Could not send TACACS+ message.

Recommended Action    No action is required.

Error Message    %AAA-4-SET_SERVER_FAILED: Could not set RADIUS server. [chars]. 

Explanation    Could not set RADIUS server.

Recommended Action    No action is required.

Error Message    %AAA-4-SUPPLY_UNAME_PASS: Username & password must be supplied. User 
: [address], Pass: [address]. 

Explanation    Username & password must be supplied.

Recommended Action    No action is required.

Error Message    %AAA-5-SYN_CALLBACK_FAILED: AAA Sync.Callback failed. [chars]. 

Explanation    AAA Sync.Callback failed.

Recommended Action    No action is required.

Error Message    %AAA-3-TEST_NULL_FAILED: Unable to allocate memory off the stack. 

Explanation    Unable to allocate memory off the stack for testing null attributes.

Recommended Action    This is a debug message only. No action is required.

Error Message    %AAA-4-TPLUS_SERVER_NOT_FOUND: TACACS+ server not found. [chars] 

Explanation    TACACS+ server not found

Recommended Action    No action is required.

Error Message    %AAA-4-TPLUS_SWITCHOVER_FAILED: TACACS+ server switchover failed. 
Current server is  [dec].[dec].[dec].[dec]. 

Explanation    TACACS+ server switchover failed

Recommended Action    No action is required.

Error Message    %AAA-5-TPLUS_SWITCHOVER_SUCCESS: TACACS+ server switchover 
successful. New server is [dec].[dec].[dec].[dec]. 

Explanation    TACACS+ server switchover successful

Recommended Action    No action is required.

Error Message    %AAA-4-TRANSLATE_AAA_TO_RADIUS_FAILED: Could not translate AAA AVP to 
RADIUS AVP. [chars].Code=[dec], ValueLen=[dec], VendorId=[dec], Buf=[address], 
BufSize=[dec]. 

Explanation    Could not translate AAA AVP to RADIUS AVP.

Recommended Action    No action is required.

Error Message    %AAA-4-TXQUEUE_ADD_FAILED: Transmission queue full. Queue name: 
[chars]. Dropping sessionpackets. 

Explanation    Transmission queue full. Dropping session packets.

Recommended Action    No action is required.

Error Message    %AAA-3-UNAME_TOO_LONG: Username too long. Username: [int]. 

Explanation    Username too long.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %AAA-6-USER_AUTH_PASSED: User authenticated. Username: [chars]. 

Explanation    A user authenticated.

Recommended Action    No action is required.

Error Message    %AAA-3-USER_CHAP_CHECK_FAILED: Could not check the CHAP challenge. 
[chars].UsernameLength:[int]. Username: [chars]. 

Explanation    Could not check the CHAP challenge.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %AAA-3-USERDBFILE_CREATE_FAILED: Unable to create user database file. 
[chars]. 

Explanation    Unable to create user database file.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %AAA-3-USERDBFILE_LOAD_FAILED: Unable to load user database file. 
[chars]. 

Explanation    Unable to load user database file.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %AAA-3-USER_DB_INIT_FAILED: User database not initialized. 

Explanation    User database is not initialized.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %AAA-3-USER_PASS_CHECK_FAILED: Could not check password for user. 
[chars].UsernameLength: [dec]. Password Length:[dec]. 

Explanation    Could not check password for user.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %AAA-3-VALIDATE_MSCHAP2_CRED_FAILED: Could not validate credentials 
for proxied RADIUS. [chars]. STA : [hex]:[hex]:[hex]:[hex]:[hex]:[hex] (len [int]) 

Explanation    Could not validate credentials for proxied RADIUS.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

ACL Messages

This section contains access control list (ACL) messages.

Error Message    %ACL-3-ACE_GET_FAILED: Failed to get ACE from ACL. [chars] 

Explanation    Unable to get an access control entryfrom an access control list.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %ACL-3-CONFIG_STORE_FAILED: Failed to store Acl Config to Flash 
[chars]. 

Explanation    Writing to File operation failed forAcl Config file onto the flash

Recommended Action    Try again after sometime. If it fails reset the controller

Error Message    %ACL-3-DB_LOCK_FAILED: Couldn't get exclusive access on the Acl 
database. [chars]. 

Explanation    All Acls and their rules are placed inthe ACL database. To change precedencea rule in the acl, the table needs tobe locked by obtaining a semaphore.This is failing.

Recommended Action    Try again if it fails reset the controller

Error Message    %ACL-3-DB_UNLOCK_FAILED: Couldn't release exclusive access on the Acl 
database. [chars]. 

Explanation    Releasing the ACL Table semaphore torelinquish the exclusive access hasfailed

Recommended Action    Reset the controller

Error Message    %ACL-3-ENTRY_CREATE_FAILED: Couldn't create ACL [chars]. [chars]. 

Explanation    Couldn't create ACL

Recommended Action    Try another acl name or delete old acl to create new.

Error Message    %ACL-3-ENTRY_DELETE_FAILED: Failed to delete ACL Entry [chars]. 
[chars]. 

Explanation    Failed to delete ACL Entry

Recommended Action    Free Acl from CPU Interface orother interface or WLAN

Error Message    %ACL-3-ENTRY_DONOT_EXIST: Unable to find an ACL by name "[chars]". 

Explanation    Unable to get an access control listby name.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %ACL-3-GET_FREE_ACL: Couldn't get an unused ACL. [chars]. 

Explanation    Couldn't get an unused ACL.

Recommended Action    maximum supported ACLs are there.Delete old acl to create new acl.

Error Message    %ACL-3-GET_NAME_BY_ID_FAILED: Couldnt get ACL name by ID. [chars]. 

Explanation    Couldnt get ACL name by ID.

Recommended Action    Provide correct ACL id that is configured.

Error Message    %ACL-3-IMPRULE_DEL_AVOIDED: Deleting the implicit deny rule [dec] of 
ACL [chars] is not allowed. 

Explanation    Every ACL has an implicit deny allrule which is always the last rule inthe ACL (An ACL allows 64 rules). Thisrule cannot be deleted. The user istrying to do the same.

Recommended Action    None.

Error Message    %ACL-3-INFO_PUSH_FAILED: Failed to push CPU Acl info the NPU 

Explanation    Failed to push CPU Acl info the NPU

Recommended Action    Try again after some time.If it still fails reset controller.

Error Message    %ACL-3-INIT_FAILED: Failure in creating Acl Database. [chars]. 

Explanation    Failed to create the semaphore toprotect the Acl Database .

Recommended Action    Reset the controller

Error Message    %ACL-3-IPADD_TYPE_INCORRECT: Incorrect IP address type parameter of 
rule [dec] of ACL [chars] 

Explanation    The IP addresses can only be Source orDestination addresses

Recommended Action    Try again. If it fails reset the controller

Error Message    %ACL-3-LOAD_CONF_FAILED: Acl config is corrupted. Resetting Acl config 
to default. 

Explanation    The config file is deemed corrupted if

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %ACL-3-RULE_ACTION_INVALID: Incorrect action [dec] to set for the rule 
[dec] of the ACL [chars]. 

Explanation    The action parameter of the rule of anAcl takes on the values of PERMIT orDENY. This error is displayed if theaction is neither of the two.

Recommended Action    Set action with either PERMIT or DENY

Error Message    %ACL-3-RULE_CREATE_FAILED: Can not Add Rule [dec] to ACL [chars]. 
[chars]. 

Explanation    Cannot Add Rule to ACL

Recommended Action    MAX Rule limit achieved.Delete old rule to create new.

Error Message    %ACL-3-RULE_DONOT_EXIST: Unable to [chars] the rule no.[dec] in ACL 
[chars]. No such rule exist 

Explanation    Unable to carry out the operationmentioned on the particular rule inACL, bacause it does not exist.

Recommended Action    Check ACL name and Rule Index is configured correctly.

Error Message    %ACL-3-RULE_PUSH_FAILED: Pushing rule [dec] of Acl [chars] to the 
Network Processor Failed. 

Explanation    Acls are applied in the NetworkProcessor. Hence they have to bepushed into the NPU. Pushing the ruleof the ACL has failed

Recommended Action    Try again after sometime. If it fails reset the controller

Error Message    %ACL-3-SET_PORT_RANGE_FAILED: Set Port Range failed for rule [dec] of 
ACL [chars]. [chars]. 

Explanation    Set Port Range failed for typeparameter for rule of ACL

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %ACL-3-SET_RULE_DIR_FAILED: Incorrect direction parameter for the rule 
[dec] of the ACL [chars] 

Explanation    The direction parameter of the rule ofan Acl takes on the values IN, OUT andANY. This error is displayed if thedirection is none of the three

Recommended Action    Set the direction to a valid value