Cisco Wireless LAN Controller System Message Guide, Release 7.5
DOT1D DOT1Q DOT1X and DOT3AD System Messages
Downloads: This chapterpdf (PDF - 397.0KB) The complete bookPDF (PDF - 14.39MB) | Feedback

DOT1D DOT1Q DOT1X and DOT3AD System Messages

Table Of Contents

DOT1D DOT1Q DOT1X and DOT3AD System Messages

DOT1D Messages

DOT1Q Messages

DOT1X Messages

DOT3AD Messages


DOT1D DOT1Q DOT1X and DOT3AD System Messages


This chapter contains the following topics:

DOT1D Messages

DOT1Q Messages

DOT1X Messages

DOT3AD Messages

DOT1D Messages

This section contains 802.1D (DOT1D) messages.

Error Message    %DOT1D-3-WRITE_CFG_FAIL: Failed to write config file [chars] in nv 
storage 

Explanation    The system has failed to store the configuration file in the NV storage.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %DOT1D-0-MEM_ALLOC_FAIL: [chars],Out of system memory 

Explanation    The system has failed to allocate memory. The system is out of system buffers.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %DOT1D-3-WRITE_CFG_FAIL: Failed to write config file [chars] in nv 
storage 

Explanation    The system has failed to store the configuration file in the NV storage.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %DOT1D-0-DATA_INIT_FAIL: Failed to allocate memory for the dot1d 
variables.dot1d sub-system not initialized. 

Explanation    The system has failed to allocate memory for the dot1d variables. The dot1d subsystem is not initialized.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %DOT1D-0-PORT_ALLOC_FAIL: Failed to allocate memory for GARP 
Information Declaration(GID)Port number: [hex].. 

Explanation    The system has failed to allocate memory for the GARP Information Declaration (GID) port.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %DOT1D-0-TASK_START_FAIL: Could not create [chars] task.Error 
code:[dec].The system has failed to initialize dot1d sub-system  

Explanation    The system could not create a task. The dot1d subsystem failed to initialize.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %DOT1D-3-BPDU_MEMGET_FAIL: Out of System buffers.

Explanation    The system is out of system buffers.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %DOT1D-3-RCV_MSG_FAIL: The [chars] failed to receive a message. 
Internal system error.Error code:[dec]. 

Explanation    A dot1d subsystem task has failed to receive a message. An internal system error has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %DOT1D-3-RGSTR_CHANGE_FAIL: [chars].dot1d sub-system not initialized 

Explanation    The system is unable to register a change in the state callback. The dot1d subsystem is not initialized.

Recommended Action    No action is required.

Error Message    %DOT1D-3-SND_MSG_FAIL: Failed to send message to [chars], the message 
queue for the task maybe full.Error Code: [dec], Internal system error 

Explanation    The system has failed to send a message to a task. The message queue for the task might be full. An internal system error has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %DOT1D-3-QUEUE_INIT_FAIL: Message queue  creation error.dot1d 
sub-system not initialized 

Explanation    The system has failed to initialize the dot1d message queue. The dot1d subsystem is not initialized.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %DOT1D-3-SYSINIT_GETFILE_FAIL: Failed to retrieve file from nv 
storage.File name [chars].dot1d sub-system not initialized 

Explanation    The system has failed to retrieve the file from the NV storage. The dot1d subsystem is not initialized.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %DOT1D-4-GID_ALL_USED: All Ports are used for GARP Information 
Declaration (GID) 

Explanation    All ports are used for a GARP Information Declaration (GID).

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %DOT1D-4-INVALID_BPDU_TYPE: Invalid BPDU Type [dec] received 

Explanation    The system has detected an invalid BPDU type received.

Recommended Action    This is a debug message only. No action is required.

Error Message    %DOT1D-6-PORT_FIND_FAIL: Port number [hex] is not found for GARP 
Information Declaration (GID) 

Explanation    A port has not been found for the GARP Information Declaration (GID).

Recommended Action    No action is required.

Error Message    %DOT1D-7-CONN_PORT_RING: GIP: Connecting Ports #[hex] to ring.. 

Explanation    GIP: The system is connecting ports to a ring.

Recommended Action    No action is required.

Error Message    %DOT1D-7-CREATED_PORT: GID: created Port # [hex].. 

Explanation    GID: The system has created a port.

Recommended Action    No action is required.

Error Message    %DOT1D-7-CREATING_PORT: GID: Creating Port # [hex].. 

Explanation    GID: The system is creating a port.

Recommended Action    No action is required.

Error Message    %DOT1D-7-DESTROY_PORT: GID: Destroying Port # [hex].. 

Explanation    GID: The port has been removed.

Recommended Action    No action is required.

Error Message    %DOT1D-7-DISCON_PORT_RING: GIP: Disconnecting Ports #[hex] from ring.. 

Explanation    GIP: Disconnecting ports from ring.

Recommended Action    No action is required.

Error Message    %DOT1D-7-HOLD_TIMER_EXP: GID: Hold Timer Expired.. 

Explanation    GID: The hold timer has expired.

Recommended Action    No action is required.

Error Message    %DOT1D-7-JOIN_MSG_RCV: GID: Join msg is received.. 

Explanation    GID: A join message has been received.

Recommended Action    No action is required.

Error Message    %DOT1D-7-JOIN_TIMER_EXP: GID: join Timer Expired.. 

Explanation    GID: A join timer has expired.

Recommended Action    No action is required.

Error Message    %DOT1D-7-LEAVE_ALL_TIMER_EXP: GID: Leave All Timer Expired.. 

Explanation    GID: A leave all timer has expired.

Recommended Action    No action is required.

Error Message    %DOT1D-7-LEAVE_EVENT_RCV: GID: Leave All event is received.. 

Explanation    GID: A leave all event has been received.

Recommended Action    No action is required.

Error Message    %DOT1D-7-LEAVE_MSG_RCV: GID: Leave message is received.. 

Explanation    GID: A leave message has been received.

Recommended Action    No action is required.

Error Message    %DOT1D-7-LEAVE_TIMER_EXP: GID: Leave Timer Expired.. 

Explanation    GID: A leave timer has expired.

Recommended Action    No action is required.

Error Message    %DOT1D-7-PORT_ADD: GID: Add Port # [hex].. 

Explanation    GID: The system has added a port.

Recommended Action    No action is required.

Error Message    %DOT1D-7-PORT_INDEX_UNUSED: GID: Ports at index [hex] is not used.. 

Explanation    GID: Ports at the index are not used.

Recommended Action    No action is required.

Error Message    %DOT1D-7-PROP_JOIN: GIP: propagate Join for Port #[hex].. 

Explanation    GIP: The system has propagated a join for the port.

Recommended Action    No action is required.

Error Message    %DOT1D-7-PROP_LEAVE: GIP: propagate Leave for Port #[hex].. 

Explanation    GIP: The system has propagated a leave for the port.

Recommended Action    No action is required.

Error Message    %DOT1D-7-RMV_PORT: GID: Removing Port # [hex] from the ring.. 

Explanation    GID: The system is removing a port from the ring.

Recommended Action    No action is required.

Error Message    %DOT1D-7-START_HOLD_TIMER: GID: Start Hold Timer.. 

Explanation    GID: A start hold timer has occurred.

Recommended Action    No action is required.

Error Message    %DOT1D-7-START_JOIN_TIMER: GID: Start Join Timer.. 

Explanation    GID: A start join timer has occurred.

Recommended Action    No action is required.

Error Message    %DOT1D-7-START_LEAVE_TIMER: GID: Start Leave All Timer.. 

Explanation    GID: A start leave all timer error has occurred.

Recommended Action    No action is required.

DOT1Q Messages

This section contains 802.1Q (DOT1Q) messages.

Error Message    %DOT1Q-3-FILE_WRITE_FAIL: Failed to write to a config file. File Name: 
[chars]. 

Explanation    The system has failed to write to a configuration file.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %DOT1Q-3-FLASH_READ_FAIL: Error retrieving file [chars] from system 
flash. 

Explanation    An error has occurred when retrieving the file from the system flash.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %DOT1Q-3-GID_FIND_PORT: Failed to find a gid port. Port # [dec]. 

Explanation    The system has failed to find a GID port.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %DOT1Q-3-GIP_CREATE_FAIL: Failed to Create GIP.. 

Explanation    The system has failed to create a GIP.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %DOT1Q-3-GVR_CREATE_FAIL: Failed to Create GVR. 

Explanation    The system has failed to create a GVR.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %DOT1Q-3-GVR_TO_DTL: Failed to get the link state for an interface. 
Port # [dec] 

Explanation    The system has failed to get the link state for an interface.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %DOT1Q-3-INVALID_CONFIG_REQ: Invalid configuration request. Failed to 
send vlan configuration request 

Explanation    The system has detected an invalid configuration request. The system has failed to send the VLAN configuration request.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %DOT1Q-3-INVALID_CONFIG_REQ_RCV: Invalid configuration received. 
Failed to service vlan configuration request. 

Explanation    The system has detected an invalid configuration received. The system has failed to service the VLAN configuration request.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %DOT1Q-3-LAG_CALBAK_FAIL: Link Aggregation malfunctioned while 
initializing Vlan. 

Explanation    A link aggregation has malfunctioned while initializing a VLAN.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %DOT1Q-3-MBUF_GET_FAIL: Unable to transmit GVRP packet for port # 
[dec]. Out of system buffers. 

Explanation    The system is unable to transmit a GVRP packet. The system is out of system buffers.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %DOT1Q-3-MEM_ALLOC_FAIL: Failed to allocate memory. 

Explanation    The system has failed to allocate memory.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %DOT1Q-3-MIN_VLAN_FAIL: No VLANs created upon initialization. 

Explanation    No VLANs have been created upon initialization.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %DOT1Q-3-MODIFY_VLAN_FAIL: Bridge not initialized. Cannot modify vlan. 
Vlan Id:[dec] 

Explanation    The bridge has not been initialized. The system cannot modify a VLAN.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %DOT1Q-3-NOTIFY_USERS_FAIL: Failed to notify registered users. Vlan 
Id: [dec].Interface: [dec] 

Explanation    The system has failed to notify registered users.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %DOT1Q-3-UPDATE_PSTNT_FAIL: Problem updating persistent data for VLAN 
[dec]. 

Explanation    There is a problem when updating persistent data for a VLAN.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %DOT1Q-3-UPDATE_TNZNT_FAIL: Problem updating transient data for VLAN 
[dec]. 

Explanation    There is a problem when updating transient data for a VLAN.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %DOT1Q-3-VLAN_CONFIG_FAIL: Failed to configure Vlan. Vlan Id: [dec]. 

Explanation    The system has failed to configure a VLAN.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %DOT1Q-3-VLAN_CREATE_MODIFY_FAIL: Failed to create or modify vlan. 
Vlan Id: [dec] 

Explanation    The system has failed to create or modify a VLAN.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %DOT1Q-3-VLAN_DELAVL_FAIL: Failed to delete a vlan Entry from the AVL 
tree.VLAN [dec]. 

Explanation    The system has failed to delete a VLAN entry from the AVL tree.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %DOT1Q-3-VLAN_DEL_FAIL: Failed to delete all static vlans. Number of 
failures: [dec] 

Explanation    The system has failed to delete all static VLANs.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %DOT1Q-3-VLAN_ENTRY_FAIL: Failed while updating data for VLAN [dec] in 
the avl tree 

Explanation    The system has failed while updating data for a VLAN.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %DOT1Q-3-VLAN_FIND_FAIL: Vlan [dec] does not exist or invalid Vlan ID 

Explanation    The requested VLAN does not exist.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %DOT1Q-3-VLAN_MBR_SET: Failed to set an interface to vlan. Vlan Id: 
[dec]. Interface: [dec] 

Explanation    The system has failed to set an interface to the VLAN.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %DOT1Q-3-VLAN_PORTMBR_FAIL: Failed to get port membership information 
for vlan.Port # [dec]. 

Explanation    The system has failed to get port membership information for a VLAN.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %DOT1Q-3-VLAN_RANGE_FAIL: Attempt to create a vlan with an invalid vlan 
id [dec]. 

Explanation    The system has attempted to create a VLAN with an invalid VLAN ID.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %DOT1Q-3-VLAN_RGS_FAIL: VLAN registration failed. Registrar: [dec]. 

Explanation    The VLAN registration failed.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %DOT1Q-3-VLAN_TYPEGET_FAIL: Failed to get the Vlan Type. Port # [dec]. 

Explanation    The system has failed to get the VLAN type.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %DOT1Q-6-DB_FULL: GVRP: Data Base is FULL. Port #: [dec] 

Explanation    GVRP: The database is full.

Recommended Action    No action is required.

Error Message    %DOT1Q-6-MAX_VLAN_FAIL: No available entries for VLAN ID [dec]. 
Maximum number of Vlans allowed exceeded 

Explanation    These are no available entries for the VLAN ID. The maximum number of VLANs allowed have been exceeded.

Recommended Action    No action is required.

Error Message    %DOT1Q-7-CREATE_GVR: GVRP: Create GVR. 

Explanation    GVRP: The system has created a GVR.

Recommended Action    No action is required.

Error Message    %DOT1Q-7-DSTR_GVR: GVRP: Destroying GVR.. 

Explanation    GVRP: The GVR has been removed.

Recommended Action    No action is required.

Error Message    %DOT1Q-7-GVR_ADD_PORT: GVRP: GVR add Port # [hex].. 

Explanation    GVRP: The GVR has added a port.

Recommended Action    No action is required.

Error Message    %DOT1Q-7-GVR_RMV_PORT: GVRP: GVR removed Port # [hex].. 

Explanation    GVRP: The GVR removed a port.

Recommended Action    No action is required.

Error Message    %DOT1Q-7-JOIN_MSG_RCV: GVRP: Join msg is received. Port #: [dec]. 

Explanation    GVRP: A join message has been received.

Recommended Action    No action is required.

Error Message    %DOT1Q-7-LEAVE_ALL_TMR_EXP: GVR: delete attribute Timer Expired.. 

Explanation    GVR: A delete attribute timer has expired.

Recommended Action    No action is required.

Error Message    %DOT1Q-7-LEAVE_MSG_RCV: GVRP: Leave msg is received. Port #:[dec]. 

Explanation    GVRP: A leave message has been received.

Recommended Action    No action is required.

Error Message    %DOT1Q-7-PORT_ENABLED: Port is Enabled. Port #: [dec]. 

Explanation    The port is enabled.

Recommended Action    No action is required.

Error Message    %DOT1Q-7-PORT_JOINING: GVRP: Port # [hex] is joining.. 

Explanation    GVRP: The port is joining.

Recommended Action    No action is required.

Error Message    %DOT1Q-7-PORT_LEAVING: GVRP: Port # [hex] is leaving.. 

Explanation    GVRP: The port is leaving.

Recommended Action    No action is required.

Error Message    %DOT1Q-7-TX_GVR: GVRP: Transmitting msg. Port # [dec]. 

Explanation    GVRP: The system is transmitting a message.

Recommended Action    No action is required.

DOT1X Messages

This section contains 802.1X (DOT1X) messages.

Error Message    %DOT1X-1-ABORT_AUTH: 

Explanation    An internal error caused 802.1X authentication to be aborted.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %DOT1X-1-AUTHENTICATOR_ERR: Could not function as authenticator - 
[chars]; client [hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Client authentication failed because an internal error occurred in the 802.1X authentication process.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %DOT1X-1-DOT1X_CB_NULL: 802.1X control block NULL for mobile 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Client authentication failed because an internal control block was unexpectedly null.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %DOT1X-1-SEND_AAA_FAILED: Could not send AAA message.[chars]. Mobile: 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Client authentication failed because an internal error prevented a message from being sent to the authentication server.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %DOT1X-1-INVALID_WPA_KEY_STATE: Received EAPOL-key message while in 
invalid state ([int]) - version [int], type [int], descriptor [int], client 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    An authentication message was received from a client that was not expected while in the current state. The message was ignored.

Recommended Action    If the problem persists, try upgrading the client driver software or using different client software to isolate the cause. Also investigate possible intruder activity.

Error Message    %DOT1X-1-SET_BRDCST_KEY_ERR: Could not set broadcast keys for WLAN 
[int]; GTK length [int], Max GTK Buffer [int]

Explanation    Unable to configure the broadcast keys for the WLAN.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %DOT1X-1-SOCK_OPER_FAILED: Socket [chars] operation failed on 802.1X 
socket 

Explanation    An internal error caused a socket processing failure.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %DOT1X-1-VALIDATE_REPLAY_CTR_FAILED: Could not Validate the replay counter in packet. [chars]. Got: [hex] [hex] [hex] [hex] [hex] [hex] [hex] 
[hex]. Expected: [hex] [hex] [hex] [hex] [hex] [hex] [hex] [hex]. Mobile: [hex] 
[hex] [hex] [hex] [hex] [hex]

Explanation    Client authentication failed because an EAPOL message from the client contained an invalid replay counter.

Recommended Action    If the problem persists, try upgrading the client driver software or using different client software to isolate the cause. Also, investigate possible intruder activity.

Error Message    %DOT1X-3-AAA_SEND_ERR: Error sending AAA message - [chars]; client 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Client authentication has failed because an internal error prevented a message from being sent to the authentication server.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %DOT1X-3-AAA_SEND_FAILURE: Unable to send AAA message for client 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Client authentication has failed because a message could not be sent to the authentication server.

Recommended Action    Review the message log for other messages preceding this one that might indicate a connection failure or configuration problem. Ensure that the authentication servers are properly configured and are reachable.

Error Message    %DOT1X-3-ABORT_AUTH: Authentication Aborted 

Explanation    An internal error caused 802.1X authentication to be aborted.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %DOT1X-3-ADD_KEYMAP_KEY_ERR: Unable to add key mapping key to 
EAPOL-key message for client [hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Unable to add the mapping key in the EAPOL key message to the client.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %DOT1X-3-AUTHKEY_TX_TRANS_ERR: Authentication state transition to 
state [int] failed; port status [int], key available [int], key tx enabled [int] 

Explanation    Client authentication failed because an internal error occurred during the authentication state transition.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %DOT1X-3-CLIENT_NOT_FOUND: Unable to process 802.1X [int] msg - client 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] not found 

Explanation    A message on an internal queue could not be processed because the client indicated that the message was not found in the internal database.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %DOT1X-3-COMPUTE_PRF_FAILED: Failed to compute PRF mode [int], size 
[int] - [chars] 

Explanation    An internal error occurred when attempting to calculate a pseudorandom value.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %DOT1X-3-EAP_MSG_ERR: Could not process EAP message - [chars]; client 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Client authentication failed because an EAP message from the server or supplicant was not understood.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %DOT1X-3-EAPOL_MSG_ATTACK: 

Explanation    Client authentication failed because an EAPOL message from the client contained data that should only be sent by the access point. This issue might be caused by an intruder that is spoofing authentication frames.

Recommended Action    If the problem persists, try upgrading the client driver software or using different client software to isolate the cause. Also investigate possible intruder activity. If this does not solve the problem research and attempt to resolve the error using the Output Interpreter https://www.cisco.com/cgi-bin/Support/OutputInterpreter/home.pl. Also perform a search of the Bug Toolkit http://www.cisco.com/cgi-bin/Support/Bugtool/home.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet http://www.cisco.com/cgi-bin/front.x/case_tools/caseOpen.pl, or contact your Cisco technical support representative and provide the representative with the gathered information.

Error Message    %DOT1X-3-GTK_ENCRYPT_FAILED: Unable to encrypt CCKM GTK for client 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Client authentication failed because an internal error occurred when attempting to encrypt a temporal key.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %DOT1X-3-INTF_DEL_FAILED: Unable to delete 802.1X interface 

Explanation    An internal error prevented an 802.1X interface structure from being deleted.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %DOT1X-3-INVALID_CLIENT_DOT1X_CB: Missing 802.1X control block for 
client [hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Client authentication failed because an internal control block was unexpectedly null.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %DOT1X-3-INVALID_DOT1X_CB: Missing 802.1X or client control block 

Explanation    Client authentication failed because an internal control block was unexpectedly null.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %DOT1X-3-INVALID_DOT1X_Q_TYPE: 

Explanation    A message on an internal message queue could not be processed because the message type was invalid.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %DOT1X-3-INVALID_EAP_MSG: Invalid EAP message received - [chars]; EAP 
Id [int], 802.1X Id [dec], client [hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    An invalid EAP message was received from the client. The message was ignored.

Recommended Action    If the problem persists, try upgrading the client driver software or using different client software to isolate the cause. Also investigate possible intruder activity. If this does not solve the problem research and attempt to resolve the error using the Output Interpreter https://www.cisco.com/cgi-bin/Support/OutputInterpreter/home.pl. Also perform a search of the Bug Toolkit http://www.cisco.com/cgi-bin/Support/Bugtool/home.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet http://www.cisco.com/cgi-bin/front.x/case_tools/caseOpen.pl, or contact your Cisco technical support representative and provide the representative with the gathered information.

Error Message    %DOT1X-3-INVALID_EAPOL_VER: Invalid EAPOL version ([int]) in EAPOL-key 
message; type [int], descriptor [int], client [hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Client authentication failed because of an authentication protocol error between the client and access point.

Recommended Action    If the problem persists, try upgrading the client driver software or using different client software to isolate the cause. Also investigate possible intruder activity.

Error Message    %DOT1X-3-INVALID_KEY_LEN: 

Explanation    An internal error occurred when determining the key length for an encryption cipher.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %DOT1X-3-INVALID_KEYWRAP_ARG: Invalid key wrap parameters 

Explanation    Client authentication failed because an internal error caused invalid data to be passed to the key wrap algorithm.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %DOT1X-3-INVALID_KEYWRAP_PKT: Received invalid keywrap packet - 
[chars] 

Explanation    Client authentication failed because a received keywrap packet was invalid.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Explanation    %DOT1X-3-INVALID_MIC_ALGORITHM: Client authentication failed because an internal error occurred when attempting to compute a MIC value.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %DOT1X-3-INVALID_PTK_LEN: 

Explanation    Client authentication failed because an internal error occurred when attempting to compute a temporal key.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %DOT1X-3-INVALID_RC4_KEY: Invalid EAPOL RC4 key msg from client 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] - [chars] 

Explanation    Client authentication failed because an EAPOL RC4 key message from the client contained invalid data.

Recommended Action    If the problem persists, try upgrading the client driver software or using different client software to isolate the cause. Also investigate possible intruder activity.

Error Message    %DOT1X-3-INVALID_REPLAY_CTR: Invalid replay counter from client 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] - got [hex] [hex] [hex] [hex] [hex] [hex] 
[hex] [hex], expected [hex] [hex] [hex] [hex] [hex] [hex] [hex] [hex] 

Explanation    Client authentication failed because an EAPOL message from the client contained an invalid replay counter.

Recommended Action    If the problem persists, try upgrading the client driver software or using different client software to isolate the cause. Also investigate possible intruder activity.

Error Message    %DOT1X-3-INVALID_WPA_KEY_MSG: Error in received EAPOL msg - [chars]; 
version [int], type [int], descriptor [int], client 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Client authentication failed because of an authentication protocol error between the client and access point.

Recommended Action    If the problem persists, try upgrading the client driver software or using different client software to isolate the cause. Also investigate possible intruder activity.

Error Message    %DOT1X-3-INVALID_WPA_KEY_MSG_STATE: 

Explanation    Client authentication failed because of an authentication protocol error between the client and access point.

Recommended Action    If the problem persists, try upgrading the client driver software or using different client software to isolate the cause. Also investigate possible intruder activity.

Error Message    %DOT1X-3-KEY_LEN_NOT_FOUND: 

Explanation    An internal error occurred when attempting to determine the key length for an encrypted policy.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %DOT1X-3-MAX_EAPOL_KEY_RETRANS: Max EAPOL-key M[int] retransmissions 
exceeded for client [hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Client authentication failed because the client did not respond to an EAPOL-key message.

Recommended Action    Ensure that user credentials are correct on the client and on the AAA server.

Error Message    %DOT1X-1-MAX_EAPOL_KEY_RETRANS_FOR_MOBILE: Max EAPOL-key M[int] 
retransmissions reached for mobile [hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Client authentication failed because the client did not respond to an EAPOL-key message.

Recommended Action    Ensure that user credentials are correct on the client and on the AAA server.

Error Message    %DOT1X-1-MAX_EAP_IE_RETRIES_REACHED: Reached Max EAP-Identity Request 
retries (num) for STA [hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Client authentication failed because the client did not respond to an EAP request message.

Recommended Action    Ensure that user credentials are correct on the client and on the AAA server.

Error Message    %DOT1X-3-MAX_EAP_RETRANS: Max EAP retransmissions exceeded for client 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex]  

Explanation    Client authentication failed because the client did not respond to an EAP request message.

Recommended Action    Ensure that user credentials are correct on the client and on the AAA server.

Error Message    %DOT1X-3-MAX_EAP_RETRIES: Max EAP identity request retries ([int]) 
exceeded for client [hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Client authentication failed because the maximum number of permitted attempts was exceeded.

Recommended Action    Ensure that user credentials are correct on the client and on the AAA server.

Error Message    %DOT1X-3-MOBILE_EXCESS_RUN: Authentication has run more than [int] 
times - deleting client [hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Client authentication failed because the authentication process failed to complete within the maximum permitted number of attempts.

Recommended Action    Ensure that user credentials are correct on the client and on the AAA server.

Error Message    %DOT1X-3-PREPARE_KEY_M5_ERR: Unable to create EAPOL-key M5 - group key 
not found for WLAN [int] 

Explanation    Client authentication failed because an internal error occurred when attempting to create an EAPOL-key message

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %DOT1X-3-PSK_CONFIG_ERR: Client [hex]:[hex]:[hex]:[hex]:[hex]:[hex] 
may be using an incorrect PSK 

Explanation    A client may be attempting to access the network with an improperly configured PSK.

Recommended Action    Ensure that user credentials are correct on the client and on the AAA server.

Error Message    %DOT1X-3-RCV_INVALID_CCX_IE: [chars] with [chars] CCX IE received from 
client [hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Client authentication failed because of an authentication protocol error between the client and access point.

Recommended Action    If the problem persists, try upgrading the client driver software or using different client software to isolate the cause. Also investigate possible intruder activity.

Error Message    %DOT1X-3-RCV_INVALID_SFA_IE: [chars] with [chars] SFA IE received from 
client [hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Client authentication failed because of an authentication protocol error between the client and access point.

Recommended Action    If the problem persists, try upgrading the client driver software or using different client software to isolate the cause. Also investigate possible intruder activity.

Error Message    %DOT1X-3-SEND_WPA_BUFF_ERR: Unable to send EAPOL-key - buffer is too 
small; size [int], state [int], client [hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Client authentication failed because the retransmit buffer was too small to store the outbound authentication message.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %DOT1X-3-UNKNOWN_EAPOL_KEY_DESC: 

Explanation    Client authentication failed because an EAPOL message from the client contained an invalid or unsupported key descriptor.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %DOT1X-3-USER_LOGIN_DENY: Authentication rejected for user [chars] - 
user may already be logged in 

Explanation    User authentication failed. The most likely cause is that the username is already in use by another client.

Recommended Action    Ensure that unique usernames are used by each client.

Error Message    %DOT1X-3-WPA_KEY_MIC_ERR: TKIP MIC errors reported in EAPOL key msg 
from client [hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Client authentication failed because the client reported TKIP MIC errors in an EAPOL key message that it received from the controller. This issue might be caused by an intruder and countermeasures may have to be taken.

Recommended Action    If the problem persists, try upgrading the client driver software or using different client software to isolate the cause. Also investigate possible intruder activity.

Error Message    %DOT1X-3-WPA_SEND_STATE_ERR: 

Explanation    Client authentication failed because the session was not in the correct state when attempting to send an EAPOL-key message.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %DOT1X-4-AAA_MAX_RETRY: Max AAA authentication attempts exceeded for 
client [hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Client authentication has failed because the maximum number of authentication attempts permitted by the authentication was exceeded. If blacklisting is configured, the client will be blacklisted.

Recommended Action    Ensure that user credentials are correct on the client and on the AAA server.

Error Message    %DOT1X-4-BE_RCV_NULL_ARG: Empty message received from AAA 

Explanation    An AAA message with no content was received by the AAA back-end process. The message was ignored.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %DOT1X-4-DOT1X_MAX_RETRY: Max authentication attempts exceeded for 
client [hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Client authentication failed because the maximum number of retries was exceeded.

Recommended Action    Ensure that user credentials are correct on the client and on the AAA server.

Error Message    %DOT1X-4-EAP_CLIENT_NO_RETRANS: EAP packet is too long for 
retransmission 

Explanation    An EAP message was sent to the client but is too large to be stored in the retransmission queue. If the message is not acknowledged as having been received by the client, it will not be retransmitted.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %DOT1X-4-IGNORE_PREAUTH: Ignoring pre-auth request from client 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    A preauthentication request message from a client was ignored.

Recommended Action    No action is required.

Error Message    %DOT1X-4-INTF_NOT_FOUND: Unable to find 802.1X interface for AP 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    Client authentication failed because the 802.1X interface of the AP was not found. This issue might have been caused by the sudden loss of connection to the AP, where the client reassociates with another AP, or with the same AP when it recovers.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %DOT1X-4-INVALID_MSG_TYPE: Invalid message type [int] received from 
AAA 

Explanation   

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %DOT1X-4-RCV_INVALID_EAPOL_PKT: Invalid EAPOL packet type [int] 
received from client [hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    An EAPOL packet with an unknown type was received from a client. The packet was ignored.

Recommended Action    If the problem persists, try upgrading the client driver software or using different client software to isolate the cause. Also investigate possible intruder activity.

Error Message    %DOT1X-4-RCV_NULL_ARG: Empty message received from AAA 

Explanation    An AAA message with no content was received. The message was ignored.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %DOT1X-4-RCV_SHORT_EAP_ATTR: Received short EAP Attribute for client 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    An invalid EAP attribute was received from AAA and was ignored.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %DOT1X-4-RCV_UNKNOWN_AVP: Received unknown AVP ([int]/[int]) for 
client [hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    An unknown attribute-value pair was received during EAP processing. The AVP was ignored.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %DOT1X-4-TRUNCATE_USERNAME: Truncated user name from [int] to [int] 
characters for client [hex]:[hex]:[hex]:[hex]:[hex]:[hex] 

Explanation    The username supplied by a client was longer than permitted and has been truncated.

Recommended Action    No action is required.

Error Message    %DOT1X-4-USER_MAX: Authentication rejected for user [chars] - max 
number of users ([int]) exceeded 

Explanation    User authentication failed because the maximum permitted number of users are already connected.

Recommended Action    No action is required.

Error Message    %DOT1X-6-CCKM_UPDATE: CCKM association for 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] updated; parameter [chars], value [int] 

Explanation    A CCKM association parameter has been modified.

Recommended Action    No action is required.

Error Message    %DOT1X-6-WARP_PARAM_UPDATE: WARP association for 
[hex]:[hex]:[hex]:[hex]:[hex]:[hex] updated; parameter [chars], value [int] 

Explanation    A WARP association parameter has been modified.

Recommended Action    No action is required.

DOT3AD Messages

This section contains 802.3ad (DOT3AD) messages.

Error Message    %DOT3AD-3-FAIL_CONFIG_WRITE: Failed to store config file [chars] in nv 
store 

Explanation    The system failed to store the configuration file in the NV storage.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %DOT3AD-0-FAIL_DOT3AD_MSGQ: LAG: Unable to create msg queue for dot3ad 
lac task. 

Explanation    LAG: The system is unable to create a message queue for the dot3ad lac task. The dot3ad subsystem is not initialized.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %DOT3AD-0-FAIL_DOT3AD_SEM: Unable to create a dot3ad semaphore. 

Explanation    The system is unable to initialize a dot3ad semaphore. The dot3ad subsystem is not initialized.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %DOT3AD-3-FAIL_DOT3AD_REBOOT: LAG in transition..Swtich reboot DUE..!! 

Explanation    A LAG is in transition. A switch reboot is due.

Recommended Action    No action is required.

Error Message    %DOT3AD-3-FAIL_DOT3AD_SYSBUF: Out of System buffers.

Explanation    The system is out of system buffers.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %DOT3AD-0-FAIL_LAC_CREATE: Failed to create dot3ad LAC task. 

Explanation    The system has failed to create the dot3ad LAC task. The dot3ad subsystem is not initialized.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %DOT3AD-0-FAIL_LAC_INIT: Unable to initialize dot3ad lac task. 

Explanation    The system is unable to initialize the dot3ad lac task. The dot3ad subsystem is not initialized.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.