Cisco Wireless LAN Controller Configuration Guide, Release 7.5
Validating WLAN Mobility Security Values
Downloads: This chapterpdf (PDF - 1.03MB) The complete bookPDF (PDF - 17.88MB) | The complete bookePub (ePub - 4.41MB) | Feedback

Validating WLAN Mobility Security Values

Validating WLAN Mobility Security Values

Information About WLAN Mobility Security Values

For any anchoring or mobility event, the WLAN security policy values on each controller must match. These values can be validated in the controller debugs. This table lists the WLAN mobility security values and their corresponding security policy.

Table 1 WLAN Mobility Security Values

Security Hexadecimal Value

Security Policy

0x00000000

Security_None

0x00000001

Security_WEP

0x00000002

Security_802_1X

0x00000004

Security_IPSec*

0x00000008

Security_IPSec_Passthrough*

0x00000010

Security_Web

0x00000020

Security_PPTP*

0x00000040

Security_DHCP_Required

0x00000080

Security_WPA_NotUsed

0x00000100

Security_Cranite_Passthrough*

0x00000200

Security_Fortress_Passthrough*

0x00000400

Security_L2TP_IPSec*

0x00000800

Security_802_11i_NotUsed

Note   

Controllers running software release 6.0 or later do not support this security policy.

0x00001000

Security_Web_Passthrough