Cisco Wireless LAN Controller Configuration Guide, Release 7.0.116.0
Appendix B - Declarations of Conformity and Regulatory Information
Downloads: This chapterpdf (PDF - 243.0KB) The complete bookPDF (PDF - 40.62MB) | Feedback

Table of Contents

Declarations of Conformity and Regulatory Information

Guidelines for Operating Controllers in Japan

VCCI Class A Warning for Cisco 5500 Series Controllers and 4400 Series Controllers in Japan

VCCI Class B Warning for Cisco 2100 Series Controller in Japan

Power Cable and AC Adapter Warning for Japan

Declaration of Conformity Statements

FCC Statement for Cisco 5500 Series Wireless LAN Controllers

FCC Statement for Cisco 4400 Series Wireless LAN Controllers

FCC Statement for Cisco 2100 Series Wireless LAN Controllers

Declarations of Conformity and Regulatory Information

This appendix provides declarations of conformity and regulatory information for the products in the Cisco UWN solution.

This appendix contains these sections:

Guidelines for Operating Controllers in Japan

This section provides guidelines for avoiding interference when operating Cisco Aironet 5500, 4400, and Cisco 2100 Series Controller in Japan. These guidelines are provided in both Japanese and English.

VCCI Class A Warning for Cisco 5500 Series Controllers and 4400 Series Controllers in Japan

 


Warning



This is a Class A product based on the standard of the Voluntary Control Council for Interference by Information Technology Equipment (VCCI). If this equipment is used in a domestic environment, radio disturbance may arise. When such trouble occurs, the user may be required to take corrective actions.

 

 


 

VCCI Class B Warning for Cisco 2100 Series Controller in Japan

 


Warning



This is a Class B product based on the standard of the Voluntary Control Council for Interference from Information Technology Equipment (VCCI). If this is used near a radio or television receiver in a domestic environment, it may cause radio interference. Install and use the equipment according to the instruction manual.

 

 


 

Power Cable and AC Adapter Warning for Japan

 


Warning



When installing the product, please use the provided or designated connection cables/power cables/AC adaptors. Using any other cables/adaptors could cause a malfunction or a fire. Electrical Appliance and Material Safety Law prohibits the use of UL-certified cables (that have the “UL” shown on the code) for any other electrical devices than products designated by CISCO. The use of cables that are certified by Electrical Appliance and Material Safety Law (that have “PSE” shown on the code) is not limited to CISCO-designated products.

 

 


 

Declaration of Conformity Statements

All the Declaration of Conformity statements related to this product can be found at the following URL:

http://www.ciscofax.com

FCC Statement for Cisco 5500 Series Wireless LAN Controllers

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case users will be required to correct the interference at their own expense.

FCC Statement for Cisco 4400 Series Wireless LAN Controllers

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

FCC Statement for Cisco 2100 Series Wireless LAN Controllers

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help. [cfr reference 15.105]