Cisco Wireless LAN Controller Command Reference, Release 6.0
Controller Commands
Downloads: This chapterpdf (PDF - 5.54MB) The complete bookPDF (PDF - 15.56MB) | Feedback

Cisco Wireless LAN Controller Commands

Table Of Contents

Cisco Wireless LAN Controller Commands

Using the ? command

Using the Help Command

Show Commands for Viewing Configuration

show 802.11

show aaa auth

show acl

show acl cpu

Show Advanced 802.11 Commands

show advanced 802.11 channel

show advanced 802.11 coverage

show advanced 802.11 group

show advanced 802.11 l2roam

show advanced 802.11 logging

show advanced 802.11 monitor

show advanced 802.11 profile

show advanced 802.11 receiver

show advanced 802.11 summary

show advanced 802.11 txpower

show advanced backup-controller

show advanced client-handoff

show advanced dot11-padding

show advanced eap

show advanced max-1x-sessions

show advanced probe

show advanced rate

show advanced send-disassoc-on-handoff

show advanced statistics

show advanced timers

Show Access Point Commands

show ap auto-rf

show ap ccx rm

show ap cdp

show ap channel

show ap config

show ap config global

show ap core-dump

show ap crash-file

show ap data-plane

show ap eventlog

show ap inventory

show ap join stats detail

show ap join stats summary

show ap join stats summary all

show ap link-encryption

show ap monitor-mode summary

show ap stats

show ap summary

show ap tcp-mss-adjust

show ap wlan

show arp switch

show auth-list

show boot

show call-control ap

show call-control client

show capwap reap association

show capwap reap status

show certificate compatibility

show certificate lsc

show certificate summary

Show Client Commands

show client ap

show client ccx client-capability

show client ccx frame-data

show client ccx last-response-status

show client ccx last-test-status

show client ccx log-response

show client ccx manufacturer-info

show client ccx operating-parameters

show client ccx profiles

show client ccx results

show client ccx rm

show client ccx stats-report

show client detail

show client location-calibration summary

show client roam-history

show client summary

show client summary guest-lan

show client username

show country

show country channels

show country supported

show coredump summary

show cpu

show custom-web

show database summary

show debug

show dhcp

show dtls connections

show dhcp proxy

show eventlog

show exclusionlist

show guest-lan

show hreap group detail

show hreap group summary

show hreap office-extend

show ike

show interface

show invalid-config

show inventory

show ipsec

show known ap

show l2tp

show lag summary

show ldap

show ldap statistics

show ldap summary

show license agent

show license all

show license capacity

show license detail

show license expiring

show license evaluation

show license feature

show license file

show license handle

show license image-level

show license in-use

show license permanent

show license status

show license statistics

show license summary

show license udi

show load-balancing

show local-auth certificates

show local-auth config

show local-auth statistics

show location

show location statistics rfid

show logging

show loginsession

show macfilter

show memory monitor

Show Mesh Commands

show mesh ap

show mesh astools stats

show mesh background-scanning

show mesh backhaul rate-adapt

show mesh cac

show mesh client-access

show mesh config

show mesh env

show mesh neigh

show mesh path

show mesh per-stats

show mesh queue-stats

show mesh public-safety

show mesh secbh-stats

show mesh secondary-backhaul

show mesh security-stats

show mesh stats

show mgmtuser

Show Mobility Commands

show mobility anchor

show mobility statistics

show mobility summary

show msglog

show nac statistics

show nac summary

show netuser

show netuser guest-roles

show network

show network summary

show network multicast mgid detail

show network multicast mgid summary

show nmsp notify-interval summary

show nmsp statistics

show nmsp status

show nmsp subscription

show pmk-cache

show port

show process

show qos queue_length all

Show Radius Commands

show radius acct statistics

show radius auth statistics

show radius rfc3576 statistics

show radius summary

Show Radio Frequency ID Commands

show rfid client

show rfid config

show rfid detail

show rfid summary

Show Rogue Commands

show rogue adhoc detailed

show rogue adhoc summary

show rogue ap clients

show rogue ap detailed

show rogue ap summary

show rogue ap friendly summary

show rogue ap malicious summary

show rogue ap unclassified summary

show rogue client detailed

show rogue client summary

show rogue ignore-list

show rogue rule detailed

show rogue rule summary

show route summary

show rules

show run-config

show serial

show sessions

show snmpcommunity

show snmptrap

show snmpv3user

show snmpversion

show spanningtree port

show spanningtree switch

show stats port

show stats switch

show switchconfig

show sysinfo

Show TACACS Commands

show tacacs acct statistics

show tacacs athr statistics

show tacacs auth statistics

show tacacs summary

show tech-support

show time

show trapflags

show traplog

show version

show watchlist

show wlan

Show WPS Commands

show wps ap-authentication summary

show wps cids-sensor

show wps mfp

show wps shun-list

show wps signature detail

show wps signature events

show wps signature summary

show wps summary

show wps wips statistics

show wps wips summary

Configuring Controller Settings

Configure 802.11 Network Commands

Configure 802.11 Public Safety Commands

config 802.11-a

config 802.11-a antenna extAntGain

config 802.11-a channel ap

config 802.11-a txpower ap

config 802.11a world-mode

Configure 802.11b Commands

config 802.11b world-mode

config 802.11b 11gSupport

config 802.11b preamble

Configure 802.11h Commands

config 802.11h channelswitch

config 802.11h powerconstraint

config 802.11h setchannel

Configure 802.11 11n Support Commands

config 802.11 11nsupport

config 802.11 11nsupport a-mpdu tx priority

config 802.11 11nsupport antenna

config 802.11 11nsupport mcs tx

Configure 802.11 Antenna Commands

config 802.11 antenna diversity

config 802.11 antenna extAntGain

config 802.11 antenna mode

config 802.11 antenna selection

config 802.11 beaconperiod

config 802.11 beamforming

Configure 802.11 CAC Commands

config 802.11 cac video acm

config 802.11 cac video max-bandwidth

config 802.11 cac video roam-bandwidth

config 802.11 cac video tspec-inactivity-timeout

config 802.11 cac voice acm

config 802.11 cac voice max-bandwidth

config 802.11 cac voice roam-bandwidth

config 802.11 cac voice tspec-inactivity-timeout

config 802.11 cac voice load-based

config 802.11 cac voice stream-size

config 802.11 channel

config 802.11 channel ap

config 802.11 chan_width

config 802.11 disable

config 802.11 dtpc

config 802.11 enable

config 802.11 exp-bwreq

config 802.11 fragmentation

config 802.11 l2roam rf-params

config 802.11 pico-cell

config 802.11 picocell-V2

config 802.11 rate

config 802.11 txPower

config aaa auth

config aaa auth mgmt

config acl apply

config acl counter

config acl create

config acl cpu

config acl delete

config acl rule

Configure Advanced 802.11 Commands

config advanced 802.11 7920VSIEConfig

Configure Advanced 802.11 Channel Commands

config advanced 802.11 channel dca anchor-time

config advanced 802.11 channel dca chan-width-11n

config advanced 802.11 channel dca interval

config advanced 802.11 channel dca sensitivity

config advanced 802.11 channel foreign

config advanced 802.11 channel load

config advanced 802.11 channel noise

config advanced 802.11 channel update

Configure Advanced 802.11 Coverage Commands

config advanced 802.11 coverage

config advanced 802.11 coverage exception global

config advanced 802.11 coverage fail-rate

config advanced 802.11 coverage level global

config advanced 802.11 coverage packet-count

config advanced 802.11 coverage rssi-threshold

config advanced 802.11 edca-parameters

config advanced 802.11 factory

config advanced 802.11 group-mode

Configure Advanced 802.11 Logging Commands

config advanced 802.11 logging channel

config advanced 802.11 logging coverage

config advanced 802.11 logging foreign

config advanced 802.11 logging load

config advanced 802.11 logging noise

config advanced 802.11 logging performance

config advanced 802.11 logging txpower

Configure Advanced 802.11 Monitor Commands

config advanced 802.11 monitor channel-list

config advanced 802.11 monitor coverage

config advanced 802.11 monitor load

config advanced 802.11 monitor mode

config advanced 802.11 monitor noise

config advanced 802.11 monitor signal

Configure Advanced 802.11 Profile Commands

config advanced 802.11 profile clients

config advanced 802.11 profile customize

config advanced 802.11 profile foreign

config advanced 802.11 profile noise

config advanced 802.11 profile throughput

config advanced 802.11 profile utilization

config advanced 802.11 receiver

config advanced 802.11 txpower-update

config advanced backup-controller primary

config advanced backup-controller secondary

config advanced client-handoff

config advanced dot11-padding

config advanced assoc-limit

config advanced eap

config advanced rate

config advanced statistics

config advanced probe filter

config advanced probe limit

Configure Advanced Timers Commands

config advanced timers ap-discovery-timeout

config advanced timers ap-fast-heartbeat

config advanced timers ap-heartbeat-timeout

config advanced timers ap-primary-discovery-timeout

config advanced timers auth-timeout

config advanced timers eap-timeout

config advanced timers eap-identity-request-delay

Configure Access Point Commands

config ap

config ap bhmode

config ap bhrate

config ap bridgegroupname

config ap bridging

config ap cdp

config ap core-dump

config ap crash-file clear-all

config ap crash-file delete

config ap crash-file get-crash-file

config ap crash-file get-radio-core-dump

config ap dot1xuser

config ap dot1xuser delete

config ap dot1xuser disable

config ap ethernet

config ap group-name

config ap h-reap radius auth set

config ap h-reap vlan

config ap h-reap vlan native

config ap h-reap vlan wlan

config ap led-state

config ap link-encryption

config ap link-latency

config ap location

config ap location

config ap logging

config ap mgmtuser add

config ap mgmtuser delete

config ap mode

config ap monitor-mode

config ap name

config ap port

config ap power injector

config ap power pre-standard

config ap primary-base

config ap priority

config ap reporting-period

config ap reset

config ap role

config ap rst-button

config ap secondary-base

config ap sniff

config ap ssh

config ap static-ip

config ap stats-timer

config ap syslog host global

config ap syslog host specific

config ap tcp-adjust-mss

config ap telnet

config ap tertiary-base

config ap tftp-downgrade

config ap username

config ap wlan

config auth-list add

config auth-list ap-policy

config auth-list delete

config boot

config cdp timer

config certificate

config certificate lsc

Configure Client Commands

config client ccx clear-reports

config client ccx clear-results

config client ccx default-gw-ping

config client ccx dhcp-test

config client ccx dns-ping

config client ccx dns-resolve

config client ccx get-client-capability

config client ccx get-manufacturer-info

config client ccx get-operating-parameters

config client ccx get-profiles

config client ccx log-request

config client ccx send-message

config client ccx stats-request

config client ccx test-abort

config client ccx test-association

config client ccx test-dot1x

config client ccx test-profile

config client deauthenticate

config client location-calibration

config coredump

config coredump ftp

config coredump username

config country

config custom-web ext-webauth-mode

config custom-web ext-webauth-url

config custom-web ext-webserver

config custom-web redirectUrl

config custom-web webauth-type

config custom-web weblogo

config custom-web webmessage

config custom-web webtitle

config database size

config dhcp

config dhcp proxy

config exclusionlist

Configure Interface Commands

config guest-lan

config guest-lan custom-web ext-webauth-url

config guest-lan custom-web global disable

config guest-lan custom-web login_page

config guest-lan custom-web webauth-type

config guest-lan ingress-interface

config guest-lan interface

config guest-lan mobility anchor

config guest-lan nac

config guest-lan security

config hreap group

config hreap join min-latency

config hreap office-extend

config interface acl

config interface address

config interface ap-manager

config interface create

config interface delete

config interface dhcp

config interface guest-lan

config interface hostname

config interface nat-address

config interface port

config interface quarantine vlan

config interface vlan

config known ap

config lag

config ldap

config ldap add

config ldap simple-bind

config license agent

config license boot

config load-balancing

config local-auth active-timeout

config local-auth eap-profile

config local-auth method fast

config local-auth user-credentials

config location

config logging buffered

config logging console

config logging debug

config logging fileinfo

config logging procinfo

config logging traceinfo

config logging syslog host

config logging syslog facility

config logging syslog level

config loginsession close

Configure Macfilter Commands

config macfilter

config macfilter description

config macfilter interface

config macfilter ip-address

config macfilter mac-delimiter

config macfilter radius-compat

config macfilter wlan-id

Configure Memory Monitor Commands

config memory monitor errors

config memory monitor leaks

Configure Mesh Commands

config mesh alarm

config mesh astools

config mesh background-scanning

config mesh backhaul rate-adapt

config mesh battery-state

config mesh client-access

config mesh ethernet-bridging vlan-transparent

config mesh full-sector-dfs

config mesh linkdata

config mesh linktest

config mesh multicast

config mesh public-safety

config mesh radius-server

config mesh range

config mesh secondary-backhaul

config mesh security

Configure Management-User Commands

config mgmtuser add

config mgmtuser delete

config mgmtuser description

config mgmtuser password

Configure Mobility Commands

config mobility group anchor

config mobility group domain

config mobility group keepalive count

config mobility group keepalive interval

config mobility group member

config mobility group multicast-address

config mobility multicast-mode

config mobility secure-mode

config mobility statistics reset

Configure Message Log Level Commands

config msglog level critical

config msglog level error

config msglog level security

config msglog level verbose

config msglog level warning

Configure Net User Commands

config netuser add

config netuser delete

config netuser description

config netuser guest-role apply

config netuser guest-role create

config netuser guest-role delete

config netuser guest-role qos data-rate average-data-rate

config netuser guest-role qos data-rate average-realtime-rate

config netuser guest-role qos data-rate burst-data-rate

config netuser guest-role qos data-rate burst-realtime-rate

config netuser maxEapUserLogin

config netuser maxuserLogin

config netuser password

config netuser wlan-id

Configure Network Commands

config network 802.3-bridging

config network allow-old-bridge-aps

config network ap-fallback

config network ap-priority

config network apple-talk

config network arptimeout

config network bridging-shared-secret

config network broadcast

config network fast-ssid-change

config network ip-mac-binding

config network master-base

config network mgmt-via-wireless

config network multicast global

config network multicast igmp snooping

config network multicast igmp timeout

config network multicast mode multicast

config network multicast mode unicast

config network otap-mode

config network rf-network-name

config network secureweb

config network secureweb cipher-option

config network ssh

config network telnet

config network usertimeout

config network web-auth-port

config network webmode

config network zero-config

config nmsp notify-interval measurement

config passwd-cleartext

config pmk-cache delete

Configure Port Commands

config port adminmode

config port autoneg

config port linktrap

config port multicast appliance

config port power

config prompt

config qos average-data-rate

config qos average-realtime-rate

config qos burst-data-rate

config qos burst-realtime-rate

config qos description

config qos max-rf-usage

config qos protocol-type/config qos dot1p-tag

config qos queue_length

Configure Radius Commands

config radius acct

config radius fallback-test

config radius acct ipsec authentication

config radius acct ipsec disable

config radius acct ipsec enable

config radius acct ipsec encryption

config radius acct ipsec ike

config radius acct mac-delimiter

config radius acct network

config radius acct retransmit-timeout

Configure RADIUS Authentication Server Commands

config radius auth

config radius auth ipsec authentication

config radius auth ipsec disable

config radius auth ipsec encryption

config radius auth ipsec ike

config radius auth keywrap

config radius auth mac-delimiter

config radius auth management

config radius auth network

config radius auth retransmit-timeout

config radius auth rfc3576

config radius auth server-timeout

config radius aggressive-failover disabled

config radius backward compatibility

config radius callStationIdType

config rfid auto-timeout

config rfid status

config rfid timeout

Configure Rogue Commands

config rogue adhoc

config rogue ap classify

config rogue ap friendly

config rogue ap rldp

config rogue ap ssid

config rogue ap timeout

config rogue ap valid-client

config rogue client

config rogue detection

config rogue rule

config route add

config route delete

config serial baudrate

config serial timeout

config service timestamps

config sessions maxsessions

config sessions timeout

Configure SNMP Commands

config snmp community accessmode

config snmp community create

config snmp community delete

config snmp community ipaddr

config snmp community mode

config snmp syscontact

config snmp syslocation

config snmp trapreceiver create

config snmp trapreceiver delete

config snmp trapreceiver mode

config snmp v3user create

config snmp v3user delete

config snmp version

Configure Spanning Tree Protocol Commands

config spanningtree port mode

config spanningtree port pathcost

config spanningtree port priority

config spanningtree switch bridgepriority

config spanningtree switch forwarddelay

config spanningtree switch hellotime

config spanningtree switch maxage

config spanningtree switch mode

config switchconfig flowcontrol

config switchconfig mode

config switchconfig secret-obfuscation

config sysname

Configure TACACS Commands

config tacacs

config tacacs acct

config tacacs athr

config tacacs auth

config tacacs all

config time manual

config time ntp

config time timezone

config time timezone location

Configure Trap Flag Commands

config trapflags 802.11-Security

config trapflags aaa

config trapflags ap

config trapflags authentication

config trapflags client

config trapflags configsave

config trapflags ipsec

config trapflags linkmode

config trapflags multiusers

config trapflags rogueap

config trapflags rrm-params

config trapflags rrm-profile

config trapflags stpmode

config trapflags wps

Configure Watchlist Commands

config watchlist add

config watchlist delete

config watchlist disable

config watchlist enable

Configure Wireless LAN Commands

config wlan

config wlan 7920-support

config wlan 802.11e

config wlan aaa-override

config wlan acl

config wlan apgroup

config wlan broadcast-ssid

config wlan call-snoop

config wlan chd

config wlan ccx aironet-ie

config wlan dhcp_server

config wlan diag-channel

config wlan dtim

config wlan exclusionlist

config wlan h-reap learn-ipaddr

config wlan h-reap local-switching

config wlan interface

config wlan IPv6Support

config wlan ldap

config wlan load-balance

config wlan mac-filtering

config wlan mfp

config wlan mobility anchor

config wlan nac

config wlan peer-blocking

config wlan qos

config wlan radio

config wlan radius_server

Configure Wireless LAN Security Commands

config wlan security 802.1X

config wlan security ckip

config wlan security tkip

Config wlan security cond-web-redir

config wlan security ipsec disable

config wlan security ipsec enable

config wlan security ipsec authentication

config wlan security ipsec encryption

config wlan security ipsec config

config wlan security ipsec ike authentication

config wlan security ipsec ike dh-group

config wlan security ipsec ike lifetime

config wlan security ipsec ike phase1

config wlan security ipsec ike contivity

config wlan security passthru

config wlan security splash-page-web-redir

config wlan security static-wep-key authentication

config wlan security static-wep-key disable

config wlan security static-wep-key enable

config wlan security static-wep-key encryption

config wlan security web-auth

config wlan security web-passthrough acl

config wlan security web-passthrough disable

config wlan security web-passthrough email-input

config wlan security web-passthrough enable

config wlan security wpa1 disable

config wlan security wpa1 enable

config wlan security wpa1 pre-shared-key

config wlan security wpa2 disable

config wlan security wpa2 enable

config wlan security wpa2 pre-shared-key

config wlan security wpa2 tkip

config wlan security wpa2 wpa-compat

config wlan timeout

config wlan webauth-exclude

config wlan wmm

Configure WPS Commands

config wps ap-authentication

config wps auto-immune

config wps cids-sensor

config wps client-exclusion

config wps mfp

config wps shun-list

config wps signature

config wps signature frequency

config wps signature interval

config wps signature mac-frequency

config wps signature quiet-time

config wps signature reset

lwapp ap controller ip address

Saving Configurations

save config

Clearing Configurations, Logfiles, and Other Actions

clear acl counters

clear ap-config

clear ap-eventlog

clear ap join stats

clear arp

clear client tsm

clear config

clear ext-webauth-url

clear license agent

clear location rfid

clear location statistics rfid

clear locp statistics

clear login-banner

clear lwapp private-config

clear nmsp statistics

clear radius acct statistics

clear radius auth statistics

clear redirect-url

clear stats ap wlan

clear stats local-auth

clear stats mobility

clear stats port

clear stats radius

clear stats switch

clear stats tacacs

clear transfer

clear traplog

clear webimage

clear webmessage

clear webtitle

Uploading and Downloading Files and Configurations

transfer download certpassword

transfer download datatype

transfer download filename

transfer download mode

transfer download password

transfer download path

transfer download port

transfer download serverip

transfer download start

transfer download tftpPktTimeout

transfer download tftpMaxRetries

transfer download username

transfer encrypt

transfer upload datatype

transfer upload filename

transfer upload mode

transfer upload pac

transfer upload password

transfer upload path

transfer upload port

transfer upload serverip

transfer upload start

transfer upload username

Installing and Modifying Licenses

license clear

license comment

license install

license modify priority

license revoke

license save

Troubleshooting Commands

debug aaa

debug aaa local-auth

debug airewave-director

debug ap

debug ap enable

debug arp

debug bcast

debug cac

debug capwap

debug capwap reap

debug crypto

debug dhcp

debug dhcp service-port

debug disable-all

debug dot11

debug dot11 mgmt interface

debug dot11 mgmt msg

debug dot11 mgmt ssid

debug dot11 mgmt state-machine

debug dot11 mgmt station

debug dot1x

debug group

debug hreap aaa

debug hreap cckm

debug hreap group

debug l2age

debug lwapp console cli

debug mac

debug memory

debug mesh security

debug mobility

debug nac

debug nmsp

debug ntp

debug pem

debug pm

debug poe

debug rbcp

debug rfid

debug service ap-monitor

debug snmp

debug transfer

debug wcp

debug wps sig

debug wps mfp

eping

mping


Cisco Wireless LAN Controller Commands


The Cisco Wireless LAN Solution command line interface (CLI) enables operators to connect an ASCII console to the Cisco Wireless LAN Controller and configure the controller and its associated access points.

This document covers the commands available in the Cisco CLI release 6.0. The controllers currently covered include:

Cisco 2100, 4400, and 5500 Series Wireless LAN Controllers

Cisco Wireless Services Modules (WiSM)

Cisco Wireless LAN Controller Network Modules

Catalyst 3750G Integrated Wireless LAN Controller Switches

This chapter contains the following sections:

Using the ? command

Using the Help Command

Show Commands for Viewing Configuration

Configuring Controller Settings

Saving Configurations

Clearing Configurations, Logfiles, and Other Actions

Uploading and Downloading Files and Configurations

Installing and Modifying Licenses

Troubleshooting Commands

Using the ? command

To display all of the commands in your current level of the command tree, or to display more information about a particular command, use the ? command.

?

command name ?

When you enter a command information request, put a space between command name and ?.

Examples

The following command shows you all the commands and levels available from the root level.

?
 
   
clear          Clear selected configuration elements.
config         Configure switch options and settings.
debug          Manages system debug options.
help           Help
linktest       Perform a link test to a specified MAC address.
logout         Exit this session. Any unsaved changes are lost.
ping           Send ICMP echo packets to a specified IP address.
reset          Reset options.
save           Save switch configurations.
show           Display switch options and settings.
transfer       Transfer a file to or from the switch.
 
   

The following command shows you that datatype is the only entry at the transfer download level:

> transfer download d?
datatype
 
   

The following command shows you the permissible entries for the transfer download datatype command:

> transfer download datatype ?
 
   
config         Download Configuration File.
code           Download an executable image to the system.
image          Download a web page logo to the system.
signature      Download a signature file to the system.
webadmincert   Download a certificate for web administration to the system.
webauthcert    Download a web certificate for web portal to the system.
 
   

Using the Help Command

To look up keyboard commands, use the help command at the root level.

help

Examples

> help
 
   
HELP:
Special keys:
  DEL, BS... delete previous character
  Ctrl-A  .... go to beginning of line
  Ctrl-E  .... go to end of line
  Ctrl-F  .... go forward one character
  Ctrl-B  .... go backward one character
  Ctrl-D  .... delete current character
  Ctrl-U, X. delete to beginning of line
  Ctrl-K  .... delete to end of line
  Ctrl-W  .... delete previous word
  Ctrl-T  .... transpose previous character
  Ctrl-P  .... go to previous line in history buffer
  Ctrl-N  .... go to next line in history buffer
  Ctrl-Z  .... return to root command prompt
  Tab, <SPACE> command-line completion
  Exit    .... go to next lower command prompt
  ?       .... list choices

Show Commands for Viewing Configuration

To view Cisco Wireless LAN controller options and settings, use the show commands.

show 802.11

To display basic 802.11a, 802.11b/g, or 802.11h network settings, use the show 802.11 command.

show 802.11{a | b | h}

Syntax Description

show

Display settings.

802.11

802.11 network settings.

a | b | h

Specifies 802.11a, 802.11b/g, or 802.11h network.


Defaults

None.

Examples

To display basic 802.11a network settings, enter this command:

> show 802.11a
 
   
802.11a Network.................................. Enabled
11nSupport....................................... Enabled
      802.11a Low Band........................... Enabled
      802.11a Mid Band........................... Enabled
      802.11a High Band.......................... Enabled
802.11a Operational Rates
    802.11a 6M Rate.............................. Mandatory
    802.11a 9M Rate.............................. Supported
    802.11a 12M Rate............................. Mandatory
    802.11a 18M Rate............................. Supported
    802.11a 24M Rate............................. Mandatory
    802.11a 36M Rate............................. Supported
    802.11a 48M Rate............................. Supported
    802.11a 54M Rate............................. Supported
802.11n MCS Settings:
    MCS 0........................................ Supported
    MCS 1........................................ Supported
    MCS 2........................................ Supported
    MCS 3........................................ Supported
    MCS 4........................................ Supported
    MCS 5........................................ Supported
    MCS 6........................................ Supported
    MCS 7........................................ Supported
    MCS 8........................................ Supported
    MCS 9........................................ Supported
    MCS 10....................................... Supported
    MCS 11....................................... Supported
    MCS 12....................................... Supported
    MCS 13....................................... Supported
    MCS 14....................................... Supported
    MCS 15....................................... Supported
802.11n Status:
    A-MPDU Tx ................................... Enabled
        Priority 0............................... Enabled
        Priority 1............................... Enabled
        Priority 2............................... Enabled
        Priority 3............................... Enabled
        Priority 4............................... Enabled
        Priority 5............................... Disabled
        Priority 6............................... Disabled
        Priority 7............................... Enabled
    A-MSDU Tx ................................... Enabled
    Rifs Tx ..................................... Enabled
    Guard Interval .............................. Short
Beacon Interval.................................. 100
CF Pollable mandatory............................ Disabled
CF Poll Request mandatory........................ Disabled
CFP Period....................................... 4
CFP Maximum Duration............................. 60
Default Channel.................................. 36
Default Tx Power Level........................... 1
DTPC  Status..................................... Enabled
Fragmentation Threshold.......................... 2346
Long Retry Limit................................. 4
Maximum Rx Life Time............................. 512
Max Tx MSDU Life Time............................ 512
Medium Occupancy Limit........................... 100
Pico-Cell Status................................. Disabled
Pico-Cell-V2 Status.............................. Disabled
RTS Threshold.................................... 2347
Short Retry Limit................................ 7
TI Threshold..................................... -50
Legacy Tx Beamforming setting.................... Enabled
Traffic Stream Metrics Status.................... Disabled
Expedited BW Request Status...................... Disabled
World Mode....................................... Enabled
EDCA profile type................................ default-wmm
Voice MAC optimization status.................... Disabled
Call Admission Control (CAC) configuration
Voice AC - Admission control (ACM)............ Disabled
   Voice max RF bandwidth........................ 75
   Voice reserved roaming bandwidth.............. 6
   Voice load-based CAC mode..................... Disabled
   Voice tspec inactivity timeout................ Disabled
   Video AC - Admission control (ACM)............ Disabled
   Voice Stream-Size............................. 84000
   Voice Max-Streams............................. 2
   Video max RF bandwidth........................ Infinite
   Video reserved roaming bandwidth.............. 0
 
   
 
   

To display basic 802.11h network settings, enter this command:

> show 802.11h
 
   
802.11h ......................................... powerconstraint : 0
802.11h ......................................... channelswitch : Disable
802.11h ......................................... channelswitch mode : 0

Related Commands

show network
show network summary
show ap stats
show ap summary
show client summary
show interface
show network
show port
show wlan

show aaa auth

To display the configuration settings for the AAA authentication server database, use the show aaa auth command.

show aaa auth

Syntax Description

show

Display settings.

aaa

AAA authentication server database settings.

auth

Specifies management authentication priority settings.


Defaults

None.

Examples

> show aaa auth
 
   
Management authentication server order:
    1............................................ local
    2............................................ tacacs

Related Commands

config aaa auth
config aaa auth mgmt

show acl

To display the access control lists (ACLs) that are configured on the controller, use the show acl command.

show acl {summary | detailed acl_name}

Syntax Description

show

Display settings.

acl

ACL configurations.

summary

Displays a summary of all ACLs configured on the controller.

detailed

Displays detailed information about a specific ACL.

acl_name

The ACL name up to 32 alphanumeric characters.


Defaults

None.

Examples

> show acl summary
 
   
ACL Counter Status         Enabled
-------------------------------------
ACL Name                   Applied
------------------------- -----------
acl1                         Yes
acl2                         Yes
acl3                         Yes
 
   
> show acl detailed acl_name
 
   
 
   
      Source             Destination            Source Port Dest Port
I Dir IP Address/Netmask IP Address/Netmask Prot   Range    Range     DSCP Action Counter
- --- ------------------ ------------------ ---- --------- --------- ----- ------ -------
1 Any 0.0.0.0/0.0.0.0    0.0.0.0/0.0.0.0    Any  0-65535   0-65535    0    Deny         0
2 In  0.0.0.0/0.0.0.0    200.200.200.0/     6      80-80   0-65535    Any  Permit       0
                         255.255.255.0
 
   
DenyCounter :     0
 
   

Note The Counter field increments each time a packet matches an ACL rule, and the DenyCounter field increments each time a packet does not match any of the rules.


Related Commands

clear acl counters
config acl apply
config acl counter
config acl create
config acl cpu
config acl delete
config acl rule
config interface acl
show acl cpu

show acl cpu

To display the access control lists (ACLs) configured on the central processing unit (CPU), use the show acl cpu command.

show acl cpu

Syntax Description

show

Display settings.

acl

ACL configurations.

cpu

Displays a summary of all the ACLs configured on the CPU.


Command Default

None

Examples

> show acl cpu
CPU Acl Name................................
Wireless Traffic............................ Disabled
Wired Traffic............................... Disabled
Applied to NPU.............................. No

Related Commands

clear acl counters
config acl apply
config acl counter
config acl create
config acl cpu
config acl delete
config acl rule
config interface acl
show acl

Show Advanced 802.11 Commands

Use the show advanced 802.11 commands to display more detailed or advanced 802.11a, 802.11b/g, or other supported 802.11 network settings.

show advanced 802.11 channel

To display the automatic channel assignment configuration and statistics, use the show advanced 802.11 channel command.

show advanced 802.11{a | b} channel

Syntax Description

show

Display settings.

advanced

Advanced configuration settings.

802.11

802.11 network settings.

a | b

Specifies 802.11a or 802.11b/g network.

channel

Channel status.


Defaults

None.

Examples

> show 802.11a channel
 
   
Automatic Channel Assignment
  Channel Assignment Mode........................ ONCE
  Channel Update Interval........................ 600 seconds
  Anchor time (Hour of the day).................. 15
  Channel Update Count........................... 0
  Channel Update Contribution.................... S.IU
  Channel Assignment Leader...................... 00:0b:85:40:90:c0
  Last Run....................................... 501 seconds ago
  DCA Sensitivity Level.......................... MEDIUM (20 dB)
  DCA 802.11n Channel Width...................... 40 MHz
  Channel Energy Levels
    Minimum...................................... -92 dBm
    Average...................................... -92 dBm
    Maximum...................................... -92 dBm
  Channel Dwell Times
    Minimum...................................... 0 days, 00 h 58 m 45 s
    Average...................................... 0 days, 00 h 58 m 45 s
    Maximum...................................... 0 days, 00 h 58 m 45 s
  Auto-RF Allowed Channel List................... 36,40
  Auto-RF Allowed Channel List................... 36,40,44,48,52,56,60,64,100,
    ............................................. 104,108,112,116,132,136,140,
    ............................................. 149,153,157,161,165,190,196
  DCA Outdoor AP option.......................... Disabled
 

Related Commands

Configure Advanced 802.11 Commands
Show Advanced 802.11 Commands

show advanced 802.11 coverage

To display the configuration and statistics for coverage hole detection, use the show advanced 802.11 coverage command.

show advanced 802.11{a | b} coverage

Syntax Description

show

Display settings.

advanced

Advanced configuration settings.

802.11

802.11 network settings.

a | b

Specifies 802.11a or 802.11b/g network.

coverage

Coverage hole detection.


Defaults

None.

Examples

> show advanced 802.11a coverage
 
   
Coverage Hole Detection
  802.11a Coverage Hole Detection Mode........... Enabled
  802.11a Coverage Voice Packet Count............ 100 packets
  802.11a Coverage Voice Packet Percentage....... 50%
  802.11a Coverage Voice RSSI Threshold.......... -80 dBm
  802.11a Coverage Data Packet Count............. 50 packets
  802.11a Coverage Data Packet Percentage........ 50%
  802.11a Coverage Data RSSI Threshold........... -80 dBm
  802.11a Global coverage exception level........ 25 %
  802.11a Global client minimum exception lev.... 3 clients

Related Commands

Configure Advanced 802.11 Commands
Show Advanced 802.11 Commands

show advanced 802.11 group

To display 802.11a or 802.11b Cisco radio RF grouping, use the show advanced 802.11 group command.

show advanced 802.11{a | b} group

Syntax Description

show

Display settings.

advanced

Advanced configuration settings.

802.11

802.11 network settings.

a | b

Specifies 802.11a or 802.11b/g network.

group

RF grouping values.


Defaults

None.

Examples

> show advanced 802.11a group
 
   
Radio RF Grouping
  802.11a Group Mode................................... AUTO
  802.11a Group Update Interval........................ 600 seconds
  802.11a Group Leader................................. xx:xx:xx:xx:xx:xx
    802.11a Group Member............................... xx:xx:xx:xx:xx:xx
  802.11a Last Run..................................... 133 seconds ago

Related Commands

Configure Advanced 802.11 Commands
Show Advanced 802.11 Commands

show advanced 802.11 l2roam

To display 802.11a or 802.11b/g Layer 2 client roaming information, use the show advanced 802.11 l2roam command.

show advanced 802.11{a | b} l2roam {rf-param | statistics mac_address}

Syntax Description

show

Display settings.

802.11

802.11 network settings.

a | b

Specifies 802.11a or 802.11b/g network.

l2roam

Layer 2 client roaming configurations.

rf-param

Radio frequency parameters.

statistics

Layer 2 client roaming statistics.

mac_address

The MAC address of the client.


Defaults

None.

Examples

To display 802.11b layer 2 client roaming information, enter this command:

> show advanced 802.11b l2roam rf-param
 
L2Roam 802.11bg RF Parameters.....................
    Config Mode.................................. Default
    Minimum RSSI................................. -85
    Roam Hysteresis.............................. 2
    Scan Threshold............................... -72
    Transition time.............................. 5

Related Commands

Configure Advanced 802.11 Commands
Show Advanced 802.11 Commands

show advanced 802.11 logging

To display 802.11a or 802.11b RF event and performance logging, use the show advanced 802.11 logging command.

show advanced 802.11{a | b} logging

Syntax Description

show

Display settings.

advanced

Advanced configuration settings.

802.11

802.11 network settings.

a | b

Specifies 802.11a or 802.11b/g network.

logging

RF event and performance logging.


Defaults

None.

Examples

> show advanced 802.11b logging
 
   
RF Event and Performance Logging
  Channel Update Logging......................... Off
  Coverage Profile Logging....................... Off
  Foreign Profile Logging........................ Off
  Load Profile Logging........................... Off
  Noise Profile Logging.......................... Off
  Performance Profile Logging.................... Off
  TxPower Update Logging......................... Off

Related Commands

Configure Advanced 802.11 Commands
Show Advanced 802.11 Commands

show advanced 802.11 monitor

To display the 802.11a or 802.11b default Cisco radio monitoring, use the show advanced 802.11 monitor command.

show advanced 802.11{a | b} monitor

Syntax Description

show

Display settings.

advanced

Advanced configuration settings.

802.11

802.11 network settings.

a | b

Specifies 802.11a or 802.11b/g network.

monitor

Cisco radio monitoring values.


Defaults

None.

Examples

> show advanced 802.11b monitor
 
   
Default 802.11b AP monitoring
  802.11b Monitor Mode........................... enable
  802.11b Monitor Channels....................... Country channels
  802.11b AP Coverage Interval................... 180 seconds
  802.11b AP Load Interval....................... 60 seconds
  802.11b AP Noise Interval...................... 180 seconds
  802.11b AP Signal Strength Interval............ 60 seconds

Related Commands

Configure Advanced 802.11 Commands
Show Advanced 802.11 Commands

show advanced 802.11 profile

To display the 802.11a or 802.11b lightweight access point performance profiles, use the show advanced 802.11 profile command.

show advanced 802.11{a | b} profile {global | cisco_ap}

Syntax Description

show

Display settings.

advanced

Advanced configuration settings.

802.11

802.11 network settings.

a | b

Specifies 802.11a or 802.11b/g network.

profile

Cisco radio performance profile.

global

All Cisco lightweight access points.

cisco_ap

The name of a specific Cisco lightweight access point.


Defaults

None.

Examples

> show advanced 802.11a profile global
 
   
Default 802.11a AP performance profiles
  802.11a Global Interference threshold.............. 10%
  802.11a Global noise threshold..................... -70 dBm
  802.11a Global RF utilization threshold............ 80%
  802.11a Global throughput threshold................ 1000000 bps
  802.11a Global clients threshold................... 12 clients
 
   
> show advanced 802.11a profile AP1
 
   
Cisco AP performance profile not customized
 
   

This response indicates that the performance profile for this lightweight access point is using the global defaults and has not been individually configured.

Related Commands

Configure Advanced 802.11 Commands
Show Advanced 802.11 Commands

show advanced 802.11 receiver

To display the configuration and statistics of the 802.11a or 802.11b receiver, use the show advanced 802.11 receiver command.

show advanced 802.11{a | b} receiver

Syntax Description

show

Display settings.

advanced

Advanced configuration settings.

802.11

802.11 network settings.

a | b

Specifies 802.11a or 802.11b/g network.

receiver

Receiver settings.


Defaults

None.

Examples

> show advanced 802.11a receiver
 
   
802.11a Receiver Settings
  RxStart   : Signal Threshold........................... 15
  RxStart   : Signal Lamp Threshold...................... 5
  RxStart   : Preamble Power Threshold................... 2
  RxReStart : Signal Jump Status......................... Enabled
  RxReStart : Signal Jump Threshold...................... 10
  TxStomp : Low RSSI Status.............................. Enabled
  TxStomp : Low RSSI Threshold........................... 30
  TxStomp : Wrong BSSID Status........................... Enabled
  TxStomp : Wrong BSSID Data Only Status................. Enabled
  RxAbort : Raw Power Drop Status........................ Disabled
  RxAbort : Raw Power Drop Threshold..................... 10
  RxAbort : Low RSSI Status.............................. Disabled
  RxAbort : Low RSSI Threshold........................... 0
  RxAbort : Wrong BSSID Status........................... Disabled
  RxAbort : Wrong BSSID Data Only Status................. Disabled

Related Commands

Configure Advanced 802.11 Commands
Show Advanced 802.11 Commands

show advanced 802.11 summary

To display the 802.11a or 802.11b Cisco lightweight access point name, channel, and transmit level summary, use the show advanced 802.11 summary command.

show advanced 802.11{a | b} summary

Syntax Description

show

Display settings.

advanced

Advanced configuration settings.

802.11

802.11 network settings.

a | b

Specifies 802.11a or 802.11b/g network.

summary

Cisco lightweight access point name, channel, and transmit level settings.


Defaults

None.

Examples

> show advanced 802.11b summary
 
   
AP Name      MAC Address        Admin State  Operation State   Channel TxPower
------------ ------------------ ------------ ----------------- ------- --------
CJ-1240      00:21:1b:ea:36:60    ENABLED          UP           161      1( )
CJ-1130      00:1f:ca:cf:b6:60    ENABLED          UP           56*      1(*)
 
   

Note An asterisk (*) next to a channel number or power level indicates that it is being controlled by the global algorithm settings.


Related Commands

Configure Advanced 802.11 Commands
Show Advanced 802.11 Commands

show advanced 802.11 txpower

To view the 802.11a or 802.11b automatic transmit power assignment, use the show advanced 802.11 txpower command.

show advanced 802.11{a | b} txpower

Syntax Description

show

Display settings.

802.11

802.11 network settings.

a | b

Specifies 802.11a or 802.11b/g network.

txpower

Transmit power settings.


Defaults

None.

Examples

> show advanced 802.11b txpower
 
   
Automatic Transmit Power Assignment
  Transmit Power Assignment Mode.................. AUTO
  Transmit Power Update Interval.................. 600 seconds
  Transmit Power Threshold........................ -65 dBm
  Transmit Power Neighbor Count................... 3 APs
  Transmit Power Update Contribution.............. SN.
  Transmit Power Assignment Leader................ xx:xx:xx:xx:xx:xx
  Last Run........................................ 384 seconds ago

Related Commands

Configure Advanced 802.11 Commands
Show Advanced 802.11 Commands

show advanced backup-controller

To display a list of primary and secondary backup controllers, use the show advanced backup-controller command.

show advanced backup-controller

Syntax Description

show

Display settings.

advanced

Advanced configuration settings.

backup-controller

Display backup controller list.


Defaults

None.

Examples

> show advanced backup-controller
 
   
AP primary Backup Controller ....................  controller 10.10.10.10
AP secondary Backup Controller ..................  0.0.0.0

Related Commands

Configure Advanced 802.11 Commands
Show Advanced 802.11 Commands

show advanced client-handoff

To display the number of automatic client handoffs after retries, use the show advanced client-handoff command.

show advanced client-handoff

Syntax Description

show

Display settings.

advanced

Advanced configuration settings.

client-handoff

Client handoff retry settings.


Defaults

None.

Examples

> show advanced client-handoff
 
   
Client auto handoff after retries................  130

Related Commands

Configure Advanced 802.11 Commands
Show Advanced 802.11 Commands

show advanced dot11-padding

To display the state of over-the-air frame padding on a wireless LAN controller, use the show advanced dot11-padding command.

show advanced dot11-padding

Syntax Description

show

Display settings.

advanced

Advanced configuration settings.

dot11-padding

Over-the-air frame padding settings.

enable | disable

Enable or disable this command.


Examples

To view the state of over-the-air frame padding, enter this command:

> show advanced dot11-padding
 
   
dot11-padding.................................... Disabled

Related Commands

config advanced dot11-padding
debug dot11
debug dot11 mgmt interface
debug dot11 mgmt msg
debug dot11 mgmt ssid
debug dot11 mgmt state-machine
debug dot11 mgmt station

show advanced eap

To display Extensible Authentication Protocol (EAP) settings, use the show advanced eap command.

show advanced eap

Syntax Description

show

Display settings.

eap

Client handoff count settings.


Defaults

None.

Examples

> show advanced eap
 
   
EAP-Identity-Request Timeout (seconds)........... 1
EAP-Identity-Request Max Retries................. 20
EAP Key-Index for Dynamic WEP.................... 0
EAP Max-Login Ignore Identity Response........... enable
EAP-Request Timeout (seconds).................... 1
EAP-Request Max Retries.......................... 20
EAPOL-Key Timeout (milliseconds)................. 1000
EAPOL-Key Max Retries............................ 2
 
   

Related Commands

Configure Advanced 802.11 Commands
Show Advanced 802.11 Commands

show advanced max-1x-sessions

To display the maximum number of simultaneous 802.1x sessions allowed per access point, use the show advanced max-1x-sessions command.

show advanced max-1x-sessions

Syntax Description

show

Display settings.

advanced

Advanced configuration settings.

max-1x-sessions

Maximum number of simultaneous 802.1x sessions allowed per access point.


Defaults

None.

Examples

> show advanced max-1x-sessions
 
   
Max 802.1x session per AP at a given time........ 0

Related Commands

Configure Advanced 802.11 Commands
Show Advanced 802.11 Commands

show advanced probe

To display the number of probes sent to the WLAN controller per access point per client and the probe interval in milliseconds, use the show advanced probe command.

show advanced probe

Syntax Description

show

Display settings.

advanced

Advanced configuration settings.

probe

Number of probes sent to the WLAN controller per access point per client and the probe interval in milliseconds.


Defaults

None.

Examples

To display the probe settings for the WLAN controller, enter this command:

> show advanced probe
 
   
Probe request filtering.......................... Enabled 
Probes fwd to controller per client per radio.... 12 
Probe request rate-limiting interval............. 100 msec

Related Commands

Configure Advanced 802.11 Commands
Show Advanced 802.11 Commands

show advanced rate

To display whether control path rate limiting is enabled or disabled, use the show advanced rate command.

show advanced rate

Syntax Description

show

Display settings.

advanced

Advanced configuration settings.

rate

Control path rate limiting enabled or disabled.


Defaults

None.

Examples

> show advanced rate
 
   
Control Path Rate Limiting.......................  Disabled

Related Commands

Configure Advanced 802.11 Commands
Show Advanced 802.11 Commands

show advanced send-disassoc-on-handoff

To display whether the WLAN controller disassociates clients after a handoff, use the show advanced send-disassoc-on-handoff command.

show advanced send-disassoc-on-handoff

Syntax Description

show

Display settings.

advanced

Advanced configuration settings.

send-disassoc-on-handoff

WLAN controller disassociates clients after a handoff enabled or disabled.


Defaults

None.

Examples

> show advanced send-disassoc-on-handoff
 
   
Send Disassociate on Handoff..................... Disabled

Related Commands

Configure Advanced 802.11 Commands
Show Advanced 802.11 Commands

show advanced statistics

To display whether or not the Cisco Wireless LAN controller port statistics are enabled or disabled, use the show advanced statistics command.

show advanced statistics

Syntax Description

show

Display settings.

advanced

Advanced configuration settings.

statistics

Show configuration state of port statistics reporting.


Defaults

None.

Examples

> show advanced statistics
 
   
Switch port statistics...........................  Enabled

Related Commands

Configure Advanced 802.11 Commands
Show Advanced 802.11 Commands

show advanced timers

To display the mobility anchor, authentication response, and rogue access point entry timers, use the show advanced timers command.

show advanced timers

Syntax Description

show

Display settings.

advanced

Advanced configuration settings.

timer

System timers.


Defaults

Shown below in examples.

Examples

> show advanced timers
 
   
Authentication Response Timeout (seconds)........ 10
Rogue Entry Timeout (seconds).................... 1200
AP Heart Beat Timeout (seconds).................. 30
AP Discovery Timeout (seconds)................... 10
AP Local mode Fast Heartbeat (seconds)........... disable
AP Hreap mode Fast Heartbeat (seconds)........... disable
AP Primary Discovery Timeout (seconds)........... 120

Related Commands

Configure Advanced 802.11 Commands
Show Advanced 802.11 Commands

Show Access Point Commands

Use the show ap commands to show access point settings.

show ap auto-rf

To display the auto-RF settings for a Cisco lightweight access point, use the show ap auto-rf command.

show ap auto-rf 802.11{a | b} cisco_ap

Syntax Description

show

Display settings.

ap auto-rf

Cisco radio.

802.11{a | b}

802.11a or 802.11b/g setting.

cisco_ap

Cisco lightweight access point name.


Defaults

None.

Examples

> show ap auto-rf 802.11a AP1
 
   
Number Of Slots.................................. 2
AP Name.......................................... AP03
MAC Address...................................... 00:0b:85:01:18:b7
  Radio Type..................................... RADIO_TYPE_80211a
  Noise Information
    Noise Profile................................ PASSED
    Channel 36...................................  -88 dBm
    Channel 40...................................  -86 dBm
    Channel 44...................................  -87 dBm
    Channel 48...................................  -85 dBm
    Channel 52...................................  -84 dBm
    Channel 56...................................  -83 dBm
    Channel 60...................................  -84 dBm
    Channel 64...................................  -85 dBm
  Interference Information
    Interference Profile......................... PASSED
    Channel 36...................................  -66 dBm @  1% busy
    Channel 40................................... -128 dBm @  0% busy
    Channel 44................................... -128 dBm @  0% busy
    Channel 48................................... -128 dBm @  0% busy
    Channel 52................................... -128 dBm @  0% busy
    Channel 56...................................  -73 dBm @  1% busy
    Channel 60...................................  -55 dBm @  1% busy
    Channel 64...................................  -69 dBm @  1% busy
  Rogue Histogram (20/40_ABOVE/40_BELOW)
    Channel 36................................... 16/ 0/ 0
    Channel 40................................... 28/ 0/ 0
    Channel 44...................................  9/ 0/ 0
    Channel 48...................................  9/ 0/ 0
    Channel 52...................................  3/ 0/ 0
    Channel 56...................................  4/ 0/ 0
    Channel 60...................................  7/ 1/ 0
    Channel 64...................................  2/ 0/ 0
  Load Information
    Load Profile................................. PASSED
    Receive Utilization.......................... 0%
    Transmit Utilization......................... 0%
    Channel Utilization.......................... 1%
    Attached Clients............................. 1 clients
  Coverage Information
    Coverage Profile............................. PASSED
    Failed Clients............................... 0 clients
  Client Signal Strengths
    RSSI -100 dBm................................ 0 clients
    RSSI  -92 dBm................................ 0 clients
    RSSI  -84 dBm................................ 0 clients
    RSSI  -76 dBm................................ 0 clients
    RSSI  -68 dBm................................ 0 clients
    RSSI  -60 dBm................................ 0 clients
    RSSI  -52 dBm................................ 0 clients
  Client Signal To Noise Ratios
    SNR    0 dBm................................. 0 clients
    SNR    5 dBm................................. 0 clients
    SNR   10 dBm................................. 0 clients
    SNR   15 dBm................................. 0 clients
    SNR   20 dBm................................. 0 clients
    SNR   25 dBm................................. 0 clients
    SNR   30 dBm................................. 0 clients
    SNR   35 dBm................................. 0 clients
    SNR   40 dBm................................. 0 clients
    SNR   45 dBm................................. 0 clients
  Nearby RADs
    RAD 00:0b:85:01:05:08 slot 0.................  -46 dBm on 10.1.30.170
    RAD 00:0b:85:01:12:65 slot 0.................  -24 dBm on 10.1.30.170
  Channel Assignment Information
    Current Channel Average Energy...............  -86 dBm 
    Previous Channel Average Energy..............  -75 dBm 
    Channel Change Count.........................  109 
    Last Channel Change Time..................... Wed Sep 29 12:53e:34 2004
    Recommended Best Channel..................... 44 
  RF Parameter Recommendations
    Power Level.................................. 1
    RTS/CTS Threshold............................ 2347
    Fragmentation Threshold...................... 2346
    Antenna Pattern.............................. 0

Related Commands

Configure Access Point Commands
Show Access Point Commands

show ap ccx rm

To display an access point's CCX radio management status information, use the show ap ccx rm command.

show ap ccx rm ap_name status

Syntax Description

show

Display settings.

ap

Cisco lightweight access point settings.

ccx

Cisco Client Extensions settings.

rm

CCX radio management settings.

ap_name

Specified access point name.

status

Display CCX radio management status information for an access point.


Defaults

None.

Examples

> show ap ccx rm AP1240-21ac status
 
   
A Radio
Channel Load Request ..................... Disabled
Noise Histogram Request .................. Disabled
Beacon Request ........................... Disabled
Frame Request ............................ Disabled
Interval ................................. 60
Iteration ................................ 10
 
   
G Radio
Channel Load Request ..................... Disabled
Noise Histogram Request .................. Disabled
Beacon Request ........................... Disabled
Frame Request ............................ Disabled
Interval ................................. 60
Iteration ................................ 10
 
   

Related Commands

Configure Access Point Commands
Show Access Point Commands

show ap cdp

To display the Cisco Discovery Protocol (CDP) information for an access point, use the show ap cdp commands.

show ap cdp {all | ap-name cisco_ap | neighbors {all | ap-name cisco_ap | detail cisco_ap}}

Syntax Description

show

Display settings.

ap

Cisco lightweight access point settings.

cdp

Cisco Discovery Protocol settings.

all | ap-name | neighbors

Enter cdp all to display CDP status on all access points.

Enter cdp ap-name to display CDP status for a specified access point.

Enter cdp neighbors to display neighbors using CDP.

ap_name

Specified access point name.

all | ap-name | detail

Enter neighbors all to show neighbors for all access points using CDP.

Enter neighbors ap-name to show neighbors for a specific access point using CDP.

Enter neighbors detail to display details about a specific access point neighbor using CDP.


Examples

> show ap cdp all
 
   
AP CDP State
AP Name             AP CDP State
------------------  ----------
SB_RAP1              enable
SB_MAP1              enable
SB_MAP2              enable
SB_MAP3              enable
 
   
> show ap cdp ap-name SB_RAP1
 
   
AP CDP State
AP Name             AP CDP State
------------------  ----------
SB_RAP1              enable
 
   
> show ap cdp neighbors all
 
   
AP Name     AP IP            Neighbor Name       Neighbor IP      Neighbor Port
---------   ---------------  ------------------  --------------  -------------
SB_RAP1     192.168.102.154  sjc14-41a-sw1       192.168.102.2    GigabitEthernet1/0/13
SB_RAP1     192.168.102.154  SB_MAP1             192.168.102.137  Virtual-Dot11Radio0
SB_MAP1     192.168.102.137  SB_RAP1             192.168.102.154  Virtual-Dot11Radio0
SB_MAP1     192.168.102.137  SB_MAP2             192.168.102.138  Virtual-Dot11Radio0
SB_MAP2     192.168.102.138  SB_MAP1             192.168.102.137  Virtual-Dot11Radio1
SB_MAP2     192.168.102.138  SB_MAP3             192.168.102.139  Virtual-Dot11Radio0
SB_MAP3     192.168.102.139  SB_MAP2             192.168.102.138  Virtual-Dot11Radio1
 
   
> show ap cdp neighbors ap-name SB_MAP2
 
   
AP Name      AP IP            Neighbor Name    Neighbor IP      Neighbor Port
-----------  ---------------  ---------------  --------------  -------------
SB_MAP2      192.168.102.138  SB_MAP1          192.168.102.137  Virtual-Dot11Radio1
SB_MAP2      192.168.102.138  SB_MAP3          192.168.102.139  Virtual-Dot11Radio0
 
   
> show ap cdp neighbors detail SB_MAP2
 
   
AP Name:SB_MAP2
AP IP address:192.168.102.138                             
-------------------------                         
Device ID: SB_MAP1                  
Entry address(es): 192.168.102.137                                  
Platform: cisco AIR-LAP1522AG-A-K9  ,  Cap                                         
Interface: Virtual-Dot11Radio0,  Port ID (outgoing port): Virtual-Dot11Radio1                                                                             
Holdtime : 180 sec                  
 
   
Version :
Cisco IOS Software, C1520 Software (C1520-K9W8-M), Experimental Version 12.4(200
81114:084420) [BLD-v124_18a_ja_throttle.20081114 208] Copyright (c) 1986-2008 by
 Cisco Systems, Inc. Compiled Fri 14-Nov-08 23:08 by
 
   
advertisement version: 2
 
   
-------------------------
Device ID: SB_MAP3
Entry address(es): 192.168.102.139
Platform: cisco AIR-LAP1522AG-A-K9  ,  Capabilities: Trans-Bridge
Interface: Virtual-Dot11Radio1,  Port ID (outgoing port): Virtual-Dot11Radio0
Holdtime : 180 sec
 
   
Version :
Cisco IOS Software, C1520 Software (C1520-K9W8-M), Experimental Version 12.4(200
81114:084420) [BLD-v124_18a_ja_throttle.20081114 208] Copyright (c) 1986-2008 by
 Cisco Systems, Inc. Compiled Fri 14-Nov-08 23:08 by
 
   
advertisement version: 2

Related Commands

config ap cdp
config cdp timer

show ap channel

To display the available channels for a specific mesh access point, use the show ap channel command.

show ap channel ap_name

Syntax Description

show

Display settings.

ap

Display access point settings.

channel

Display radio channel settings.

ap_name

Name of mesh access point.


Examples

To view the available channels for access point AP47, enter this command:

>show ap channel AP47
 
   
	802.11b/g Current Channel ...........1
Allowed Channel List.....................1,2,3,4,5,6,7,8,9,10,11
802.11a Current Channel .................161
Allowed Channel List.....................36,40,44,48,52,56,60,64,100,
.........................................104,108,112,116,132,136,140,
.........................................149,153,157,161

Related Commands

config 802.11-a channel ap
config 802.11h channelswitch
config 802.11h setchannel

show ap config

To display the detailed configuration for a lightweight access point, use the show ap config command.

show ap config {802.11{a | b} | general} cisco_ap

Syntax Description

show

Display settings.

ap

Display access point settings.

config

Display access point configuration settings.

802.11

Display 802.11 radio settings.

a | b

Specifies 802.11a or 802.11b/g network.

general

Displays general access point settings.

cisco_ap

Specifies the lightweight access point name.


Defaults

None.

Examples

> show ap config 802.11a AP02
 
   
Cisco AP Identifier.............................. 0
Cisco AP Name.................................... AP02
AP Regulatory Domain............................. Unconfigured
Switch Port Number .............................. 1
MAC Address...................................... 00:0b:85:18:b6:50
IP Address Configuration......................... DHCP
IP Address....................................... 1.100.49.240
IP NetMask....................................... 255.255.255.0
Gateway IP Addr.................................. 1.100.49.1
Cisco AP Location................................ default-location
Cisco AP Group Name.............................. default-group
Primary Cisco Switch............................. Cisco_32:ab:63
Secondary Cisco Switch...........................
Tertiary Cisco Switch............................
Administrative State ............................ ADMIN_ENABLED
Operation State ................................. REGISTERED
Mirroring Mode .................................. Disabled
AP Mode ........................................... Sniffer
Public Safety ..................................... Global: Disabled, Local: Disabled
Sniffing .............................................. No
Remote AP Debug ................................. Disabled
S/W  Version .................................... 3.1.61.0
Boot  Version ................................... 1.2.59.6
Stats Re--More-- or (q)uit
porting Period .................................. 180
LED State........................................ Enabled
ILP Pre Standard Switch.......................... Disabled
ILP Power Injector............................... Disabled
Number Of Slots.................................. 2
AP Model......................................... AS-1200
AP Serial Number................................. 044110223A
AP Certificate Type.............................. Manufacture Installed
 
   
Attributes for Slot  0
    Radio Type................................... RADIO_TYPE_80211a
    Administrative State ........................ ADMIN_ENABLED
    Operation State ............................. UP
    CellId ...................................... 0
 
   
    Station Configuration
      Configuration ............................. AUTOMATIC
      Number Of WLANs ........................... 1
      Medium Occupancy Limit .................... 100
      CFP Period ................................ 4
      CFP MaxDuration ........................... 60
      BSSID ..................................... 00:0b:85:18:b6:50
    Operation Rate Set
        6000 Kilo Bits........................... MANDATORY
        9000 Kilo Bits........................... SUPPORTED
        12000 Kilo Bits.......................... MANDATORY
        18000 Kilo Bits.......................... SUPPORTED
        24000 Kilo Bits.......................... MANDATORY
        36000 Kilo Bits.......................... SUPPORTED
        48000 Kilo Bits.......................... SUPPORTED
        54000 Kilo Bits.......................... SUPPORTED
      Beacon Period ............................. 100
      DTIM Period ............................... 1
      Fragmentation Threshold ................... 2346
      Multi Domain Capability Implemented ....... TRUE
      Multi Domain Capability Enabled ........... TRUE
      Country String ............................ US
 
   
    Multi Domain Capability
      Configuration ............................. AUTOMATIC
      First Chan Num ............................ 36
      Number Of Channels ........................ 4
 
   
    MAC Operation Parameters
      Configuration ............................. AUTOMATIC
      RTS Threshold ............................. 2347
      Short Retry Limit ......................... 7
      Long Retry Limit .......................... 4
      Fragmentation Threshold ................... 2346
      Maximum Tx MSDU Life Time ................. 512
      Maximum Rx Life Time ...................... 512
 
   
    Tx Power
      Num Of Supported Power Levels ............. 5
      Tx Power Level 1 .......................... 18 dBm
      Tx Power Level 2 .......................... 15 dBm
      Tx Power Level 3........................... 12 dBm
      Tx Power Level 4 .......................... 9 dBm
      Tx Power Level 5 .......................... 6 dBm
      Tx Power Configuration .................... CUSTOMIZED
      Current Tx Power Level..................... 5
 
   
    Phy OFDM parameters
      Configuration ............................. AUTOMATIC
      Current Channel ........................... 36
      TI Threshold .............................. -50
      Legacy Tx Beamforming Configuration ....... CUSTOMIZED
      Legacy Tx Beamforming ..................... ENABLED
      Antenna Type............................... INTERNAL_ANTENNA
      Internal Antenna Gain (in .5 dBm units).... 11
      AntennaMode................................ ANTENNA_OMNI
 
   
    Performance Profile Parameters
      Configuration ............................. AUTOMATIC
      Interference threshold..................... 10%
      Noise threshold............................  -70 dBm
      RF utilization threshold................... 80%
      Data-rate threshold........................ 1000000 bps
      Client threshold........................... 12 clients
      Coverage SNR threshold..................... 16 dB
      Coverage exception level................... 25%
      Client minimum exception level............. 3 clients
    Rogue Containment Information
    Containment Count............................ 0
 
   
> show ap config 802.11b AP02
 
   
Cisco AP Identifier.............................. 0
Cisco AP Name.................................... AP02
AP Regulatory Domain............................. Unconfigured
Switch Port Number .............................. 1
MAC Address...................................... 00:0b:85:18:b6:50
IP Address Configuration......................... DHCP
IP Address....................................... 1.100.49.240
IP NetMask....................................... 255.255.255.0
Gateway IP Addr.................................. 1.100.49.1
Cisco AP Location................................ default-location
Cisco AP Group Name.............................. default-group
Primary Cisco Switch............................. Cisco_32:ab:63
Secondary Cisco Switch...........................
Tertiary Cisco Switch............................
Administrative State ............................ ADMIN_ENABLED
Operation State ................................. REGISTERED
Mirroring Mode .................................. Disabled
AP Mode ......................................... Local
Remote AP Debug ................................. Disabled
S/W  Version .................................... 3.1.61.0
Boot  Version ................................... 1.2.59.6
Stats Reporting Period .......................... 180
LED State........................................ Enabled
ILP Pre Standard Switch.......................... Disabled
ILP Power Injector............................... Disabled
Number Of Slots.................................. 2
AP Model......................................... AS-1200
AP Serial Number................................. 044110223A
AP Certificate Type.............................. Manufacture Installed
 
   
Attributes for Slot  1
    Radio Type................................... RADIO_TYPE_80211g
    Administrative State ........................ ADMIN_ENABLED
    Operation State ............................. UP
    CellId ...................................... 0
 
   
    Station Configuration
      Configuration ............................. AUTOMATIC
      Number Of WLANs ........................... 1
      Medium Occupancy Limit .................... 100
      CFP Period ................................ 4
      CFP MaxDuration ........................... 60
      BSSID ..................................... 00:0b:85:18:b6:50
      Operation Rate Set
        1000 Kilo Bits........................... MANDATORY
        2000 Kilo Bits........................... MANDATORY
        5500 Kilo Bits........................... MANDATORY
        11000 Kilo Bits.......................... MANDATORY
        6000 Kilo Bits........................... SUPPORTED
        9000 Kilo Bits........................... SUPPORTED
        12000 Kilo Bits.......................... SUPPORTED
        18000 Kilo Bits.......................... SUPPORTED
        24000 Kilo Bits.......................... SUPPORTED
        36000 Kilo Bits.......................... SUPPORTED
        48000 Kilo Bits.......................... SUPPORTED
        54000 Kilo Bits.......................... SUPPORTED
      Beacon Period ............................. 100
      DTIM Period ............................... 1
      Fragmentation Threshold ................... 2346
      Multi Domain Capability Implemented ....... TRUE
      Multi Domain Capability Enabled ........... TRUE
      Country String ............................ US
 
   
    Multi Domain Capability
      Configuration ............................. AUTOMATIC
      First Chan Num ............................ 1
      Number Of Channels ........................ 11
 
   
    MAC Operation Parameters
      Configuration ............................. AUTOMATIC
      RTS Threshold ............................. 2347
      Short Retry Limit ......................... 7
      Long Retry Limit .......................... 4
      Fragmentation Threshold ................... 2346
      Maximum Tx MSDU Life Time ................. 512
      Maximum Rx Life Time....................... 512
 
   
    Tx Power
      Num Of Supported Power Levels.............. 5
      Tx Power Level 1 .......................... 17 dBm
      Tx Power Level 2........................... 14 dBm
      Tx Power Level 3........................... 11 dBm
      Tx Power Level 4........................... 8 dBm
      Tx Power Level 5........................... 5 dBm
      Tx Power Configuration..................... CUSTOMIZED
      Current Tx Power Level..................... 5
 
   
    Phy OFDM parameters
      Configuration.............................. CUSTOMIZED
      Current Channel............................ 1
      TI Threshold............................... -50
      Legacy Tx Beamforming Configuration ....... CUSTOMIZED
      Legacy Tx Beamforming ..................... ENABLED
      Antenna Type............................... INTERNAL_ANTENNA
      Internal Antenna Gain (in5 dBm units)...... 11
      Diversity.................................. DIVERSITY_ENABLED
 
   
    Performance Profile Parameters
      Configuration.............................. AUTOMATIC
      Interference threshold..................... 10%
      Noise threshold............................  -70 dBm
      RF utilization threshold................... 80%
      Data-rate threshold........................ 1000000 bps
      Client threshold........................... 12 clients
      Coverage SNR threshold..................... 12 dB
      Coverage exception level................... 25%
      Client minimum exception level............. 3 clients
    Rogue Containment Information
    Containment Count............................ 0
 
   
> show ap config general cisco-ap
 
   
Cisco AP Identifier.............................. 9
Cisco AP Name.................................... cisco-ap
Country code..................................... US - United States
Regulatory Domain allowed by Country............. 802.11bg:-A 802.11a:-A
AP Country code.................................. US - United States
AP Regulatory Domain............................. 802.11bg:-A 802.11a:-A
Switch Port Number .............................. 1
MAC Address...................................... 12:12:12:12:12:12
IP Address Configuration......................... DHCP
IP Address....................................... 10.10.10.21
IP NetMask....................................... 255.255.255.0
CAPWAP Path MTU.................................. 1485
Domain...........................................
Name Server......................................
Telnet State..................................... Disabled
Ssh State........................................ Disabled
Cisco AP Location................................ default location
Cisco AP Group Name.............................. default-group
Primary Cisco Switch Name........................ 4404
Primary Cisco Switch IP Address.................. 10.10.10.32
Secondary Cisco Switch Name......................
Secondary Cisco Switch IP Address................ Not Configured
Tertiary Cisco Switch Name....................... 4404
Tertiary Cisco Switch IP Address................. 3.3.3.3
Administrative State ............................ ADMIN_ENABLED
Operation State ................................. REGISTERED
Mirroring Mode .................................. Disabled
AP Mode ......................................... Local
Public Safety ................................... Global: Disabled, Local: Disabled
AP subMode ...................................... WIPS
Remote AP Debug ................................. Disabled
S/W  Version .................................... 5.1.0.0
Boot  Version ................................... 12.4.10.0
Mini IOS Version ................................ 0.0.0.0
Stats Reporting Period .......................... 180
LED State........................................ Enabled
PoE Pre-Standard Switch.......................... Enabled
PoE Power Injector MAC Addr...................... Disabled
Power Type/Mode.................................. PoE/Low Power (degraded mode)
Number Of Slots.................................. 2
AP Model......................................... AIR-LAP1252AG-A-K9
IOS Version...................................... 12.4(10:0)
Reset Button..................................... Enabled
AP Serial Number................................. serial_number
AP Certificate Type.............................. Manufacture Installed
Management Frame Protection Validation........... Enabled (Global MFP Disabled)
AP User Mode..................................... CUSTOMIZED
AP User Name..................................... maria
AP Dot1x User Mode............................... Not Configured
AP Dot1x User Name............................... Not Configured
Cisco AP system logging host..................... 255.255.255.255
AP Up Time....................................... 4 days, 06 h 17 m 22 s
AP LWAPP Up Time................................. 4 days, 06 h 15 m 00 s
Join Date and Time............................... Mon Mar 3 06:19:47 2008
 
   
Ethernet Port Duplex............................. Auto
Ethernet Port Speed.............................. Auto
AP Link Latency.................................. Enabled
 Current Delay................................... 0 ms
 Maximum Delay................................... 240 ms
 Minimum Delay................................... 0 ms
 Last updated (based on AP Up Time).............. 4 days, 06 h 17 m 20 s

Related Commands

Configure Access Point Commands
Show Access Point Commands

show ap config global

To display the global syslog server settings for all access points that join the controller, use the show ap config global command.

show ap config global

Syntax Description

show

Display settings.

ap

Display access point settings.

config

Display Cisco radio configurations.

global

Display global syslog server settings for all access points that join the controller.


Defaults

None.

Examples

> show ap config global
 
   
AP global system logging host.............................. 255.255.255.255

Related Commands

Configure Access Point Commands
Show Access Point Commands

show ap core-dump

To display the memory core dump information for a lightweight access point, use the show ap core-dump command.

show ap core-dump cisco_ap

Syntax Description

show

Display settings.

ap

Display access point settings.

core-dump

Display memory core dump information for a specified access point.

cisco_ap

Cisco lightweight access point name.


Defaults

None.

Examples

> show ap core-dump AP02

Related Commands

Configure Access Point Commands
Show Access Point Commands

show ap crash-file

To display the list of both crash and radio core dump files generated by lightweight access points, use the show ap crash-file command.

show ap crash-file

Syntax Description

This command has no arguments or keywords.

Defaults

None.

Examples

> show ap crash-file

Related Commands

Configure Access Point Commands
Show Access Point Commands

show ap data-plane

To display the data plane status for all access points or a specific access point, use the show ap data-plane command.

show ap data-plane {all | Cisco_AP}

Syntax Description

show

Display settings.

ap

Display access point settings.

data-plane

Display memory core dump information for a specified access point.

all

All Cisco lightweight access points.

Cisco_AP

Cisco lightweight access point name.


Defaults

None.

Examples

> show ap data-plane all 
 
   
                       Min Data          Data          Max Data     Last
AP Name               Round Trip      Round Trip      Round Trip    Update
------------------  --------------  --------------  --------------  ------
1130                       0.000s          0.000s       0.002s     18:51:23
1240                       0.000s          0.000s       0.000s     18:50:45
 
   

Related Commands

Configure Access Point Commands
Show Access Point Commands

show ap eventlog

To view the contents of the event log file for an access point that is joined to the controller, use the show ap eventlog command.

show ap eventlog ap_name

Syntax Description

ap_name

Displays the event log for the specified access point.


Defaults

None

Examples

show ap eventlog CiscoAP
AP event log download has been initiated
Waiting for download to complete
 
   
AP event log download completed.
======================= AP Event log Contents =====================
*Feb 13 11:54:17.146: %CAPWAP-3-CLIENTEVENTLOG: AP event log has been cleared from the 
contoller 'admin'
*Feb 13 11:54:32.874: *** Access point reloading. Reason: Reload Command ***
*Mar 1 00:00:39.134: %CDP_PD-4-POWER_OK: Full power - NEGOTIATED inline power source
*Mar 1 00:00:39.174: %LINK-3-UPDOWN: Interface Dot11Radio1, changed state to up
*Mar 1 00:00:39.211: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
*Mar 1 00:00:49.947: %CAPWAP-3-CLIENTEVENTLOG: Did not get vendor specific options from 
DHCP.
...

Related Commands

Configure Access Point Commands
Show Access Point Commands

show ap inventory

This command is used to display inventory information for an access point.

show ap inventory ap_name

Syntax Description

ap_name

Displays the inventory for the specified access point.


Defaults

None.

Examples

> show ap inventory test101
 
   

NAME: "test101" , DESCR: "Cisco Wireless Access Point"

PID: AIR-LAP1131AG-A-K9 , VID: V01, SN: FTX1123T2XX

Related Commands

Configure Access Point Commands
Show Access Point Commands

show ap join stats detail

To display all join-related statistics collected for a specific access point, use the show ap join stats detail command.

show ap join stats detail ap_mac

Syntax Description

show

Display settings.

ap

All Cisco lightweight access points.

join stats detail

Join-related statistics collected for a specific access point.

ap_mac

Access point Ethernet MAC address or the MAC address of the 802.11 radio interface.


Examples

> show ap join stats detail 00:0b:85:02:0d:20
Discovery phase statistics
- Discovery requests received.......................... 2
- Successful discovery responses sent.................. 2
- Unsuccessful discovery request processing............ 0
- Reason for last unsuccessful discovery attempt....... Not applicable
- Time at last successful discovery attempt............ Aug 21 12:50:23:335
- Time at last unsuccessful discovery attempt.......... Not applicable
 
   
Join phase statistics
- Join requests received............................... 1
- Successful join responses sent....................... 1
- Unsuccessful join request processing................. 1
- Reason for last unsuccessful join attempt.............RADIUS authorization is pending 
for the AP
- Time at last successful join attempt................. Aug 21 12:50:34:481
- Time at last unsuccessful join attempt............... Aug 21 12:50:34:374
 
   
Configuration phase statistics
- Configuration requests received...................... 1
- Successful configuration responses sent.............. 1
- Unsuccessful configuration request processing........ 0
- Reason for last unsuccessful configuration attempt... Not applicable
- Time at last successful configuration attempt........ Aug 21 12:50:34:374
- Time at last unsuccessful configuration attempt...... Not applicable
 
   
Last AP message decryption failure details
- Reason for last message decryption failure........... Not applicable
 
   
Last AP disconnect details
- Reason for last AP connection failure................ Not applicable
 
   
Last join error summary
- Type of error that occurred last..................... Lwapp join request rejected
- Reason for error that occurred last.................. RADIUS authorization is pending 
for the AP
- Time at which the last join error occurred........... Aug 21 12:50:34:374

Related Commands

Configure Access Point Commands
Show Access Point Commands

show ap join stats summary

To display the last join error detail for a specific access point, use the show ap join stats summary command.

show ap join stats summary ap_mac

Syntax Description

show

Display settings.

ap

All Cisco lightweight access points.

join stats summary

Summary of all access points that joined or attempted to join to the controller.

ap_mac

Access point Ethernet MAC address or the MAC address of the 802.11 radio interface.


Usage Guidelines


Note To obtain the MAC address of the 802.11 radio interface, enter the show interface command on the access point.


Examples

> show ap join stats summary 00:0b:85:02:0d:20
 
   
Is the AP currently connected to controller.......................... No
Time at which the AP joined this controller last time................ Aug 21 12:50:36:061
Type of error that occurred last..................................... Lwapp join request 
rejected
Reason for error that occurred last.................................. RADIUS authorization 
is pending for the AP
Time at which the last join error occurred........................... Aug 21 12:50:34:374

Related Commands

Configure Access Point Commands
Show Access Point Commands
show interface

show ap join stats summary all

To display the MAC addresses of all the access points that are joined to the controller or that have tried to join, use the show ap join stats summary all command.

show ap join stats summary all

Syntax Description

show

Display settings.

ap

All Cisco lightweight access points.

join stats summary

Summary of all access points that joined or attempted to join to the controller.


Defaults

None.

Examples

> show ap join stats summary all
Number of APs.............................................. 4
Base Mac             AP EthernetMac         AP Name         IP Address         Status
00:0b:85:57:bc:c0     00:0b:85:57:bc:c0     AP1130         10.10.163.217     Joined
00:1c:0f:81:db:80     00:1c:63:23:ac:a0     AP1140         10.10.163.216     Not joined
00:1c:0f:81:fc:20     00:1b:d5:9f:7d:b2     AP1             10.10.163.215     Joined
00:21:1b:ea:36:60     00:0c:d4:8a:6b:c1     AP2             10.10.163.214     Not joined
 
   

Related Commands

Configure Access Point Commands
Show Access Point Commands

show ap link-encryption

To display the MAC addresses of all the access points that are joined to the controller or that have tried to join, use the show ap join stats summary all command.

show ap link-encryption {all | Cisco_AP}

Syntax Description

show

Display settings.

ap

Access point settings.

link-encryption

Link encryption status for an access point.

all | Cisco_AP

Cisco lightweight access point or all access points.


Defaults

None.

Examples

> show ap link-encryption all
 
   
             Encryption  Dnstream  Upstream    Last
AP Name           State     Count     Count  Update
------------------  ---  --------  --------  ------
1240                Dis      4406    237553   Never
1130                 En      2484    276308   19:31
 
   

Related Commands

Configure Access Point Commands
Show Access Point Commands

show ap monitor-mode summary

To display the current channel-optimized monitor mode settings, use the show ap monitor-mode summary command.

show ap monitor-mode summary

Syntax Description

show

Display settings.

ap

Access point settings.

monitor-mode

Channel-optimized monitor mode settings.

summary

Display all settings.


Defaults

None.

Examples

To display current channel-optimized monitor mode settings, enter this command:

> show ap monitor-mode summary

AP Name Ethernet MAC Status Scanning Channel List

------------------ ----------------- ---------- ----------------------

AP_004              xx:xx:xx:xx:xx:xx Tracking  1, 6, 11, 4

Related Commands

Configure Access Point Commands
Show Access Point Commands

show ap stats

To display the statistics for a Cisco lightweight access point, use the show ap stats command.

show ap stats {802.11{a | b} | wlan} cisco_ap

Syntax Description

show

Display settings.

ap stats

Cisco radio.

802.11

Display the access point's 802.11 radio statistics.

a | b

Specifies 802.11a or 802.11b/g network.

wlan

WLAN statistics.

cisco_ap

Cisco lightweight access point name.


Defaults

None.

Examples

> show ap stats 802.11b AP02
 
   
Number Of Slots.................................. 2
AP Name.......................................... AP02
MAC Address...................................... 00:0b:85:18:b6:50
  Radio Type..................................... RADIO_TYPE_80211a
  Stats Information
    Number of Users.............................. 0
    TxFragmentCount.............................. 1679
    MulticastTxFrameCnt.......................... 1260
    FailedCount.................................. 15892
    RetryCount................................... 331
    MultipleRetryCount........................... 0
    FrameDuplicateCount.......................... 0
    RtsSuccessCount.............................. 0
    RtsFailureCount.............................. 0
    AckFailureCount.............................. 80212
    RxFragmentCount.............................. 248671
    MulticastRxFrameCnt.......................... 0
    FcsErrorCount................................ 105968
    TxFrameCount................................. 1679
    WepUndecryptableCount........................ 0

Related Commands

Configure Access Point Commands
Show Access Point Commands

show ap summary

To display a summary of all lightweight access points attached to the controller, use the show ap summary command. A list containing each lightweight access point name, number of slots, manufacturer, MAC address, location and the controller port number is displayed.

show ap summary

Syntax Description

show

Display settings.

ap

All Cisco lightweight access points.

summary

Summary of all Cisco lightweight access points.


Defaults

None.

Examples

> show ap summary
Number of APs.................................... 2
Global AP User Name.............................. user
Global AP Dot1x User Name........................ Not Configured
 
   
Number of APs.................................... 2
Global AP User Name.............................. user
Global AP Dot1x User Name........................ Not Configured
 
   
AP Name   Slots  AP Model            Ethernet MAC       Location    Port Country  Priority
--------  -----  ----------------    -----------------  ----------  ---- -------  --------
wolverine 2      AIR-LAP1252AG-A-K9  00:1b:d5:13:39:74  Reception   1    US       3
ap:1120   1      AIR-LAP1121G-A-K9   00:1b:d5:a9:ad:08  Hall 235    1    US       1

Related Commands

Configure Access Point Commands
Show Access Point Commands

show ap tcp-mss-adjust

To display the BSSID value for each WLAN defined on an access point, use the show ap wlan command.

show ap tcp-mss-adjust {cisco_ap | all}

Syntax Description

show

Display settings.

ap

All Cisco lightweight access points.

tcp-mss-adjust

Wireless LAN parameter.

cisco_ap

Specifies the lightweight access point name.

all

All access points.


Defaults

None.

Examples

> show ap tcp-mss-adjust all
 
   
AP Name            TCP State MSS Size
------------------ --------- -------
AP-1140            enabled   536
AP-1240            disabled  -
AP-1130            disabled  -

Related Commands

config ap tcp-adjust-mss

show ap wlan

To display the BSSID value for each WLAN defined on an access point, use the show ap wlan command.

show ap wlan 802.11{a | b} cisco_ap

Syntax Description

show

Display settings.

ap

All Cisco lightweight access points.

wlan

Wireless LAN parameter.

802.11

Display the access point's 802.11 radio statistics.

a | b

Specifies 802.11a or 802.11b/g network.

ap_name

Specifies the lightweight access point name.


Defaults

None.

Examples

> show ap wlan 802.11b AP01
 
   
Site Name........................................ MY_AP_GROUP1
Site Description................................. MY_AP_GROUP1
 
   
WLAN ID          Interface          BSSID
-------         -----------        --------------------------
1               management           00:1c:0f:81:fc:20
2               dynamic              00:1c:0f:81:fc:21

Related Commands

Configure Access Point Commands
Show Access Point Commands

show arp switch

To display the Cisco Wireless LAN controller MAC addresses, IP Addresses, and port types, use the show arp switch command.

show arp switch

Syntax Description

show

Display settings.

arp

Address Resolution Protocol (ARP) settings.

switch

Cisco Wireless LAN controller settings.


Defaults

None.

Examples

> show arp switch
 
   
MAC Address          IP Address         Port      VLAN      Type
------------------- ---------------- ------------ ---- -------------------
xx:xx:xx:xx:xx:xx   xxx.xxx.xxx.xxx  service port    1         
xx:xx:xx:xx:xx:xx   xxx.xxx.xxx.xxx  service port               
xx:xx:xx:xx:xx:xx   xxx.xxx.xxx.xxx  service port               

Related Commands

clear arp
debug arp

show auth-list

To display the access point authorization list, use the show auth-list command.

show auth-list

Syntax Description

show

Display settings.

auth-list

Displays access point authorization list.


Defaults

None.

Examples

> show auth-list
 
   
Authorize APs against AAA...................... disabled
Allow APs with Self-signed Certificate (SSC)... disabled
 
   
Mac Addr                  Cert Type    Key Hash
-----------------------   ----------   ------------------------------------------
xx:xx:xx:xx:xx:xx         MIC

Related Commands

clear radius auth statistics
clear stats local-auth
config auth-list add
config auth-list ap-policy
config auth-list delete

show boot

To display the primary and backup software build numbers with an indication of which is active, use the show boot command.

show boot

Syntax Description

show

Display settings.

boot

Software bootable versions.


Usage Guidelines

Each Cisco Wireless LAN controller retains one primary and one backup operating system software load in non-volatile RAM. This allows operators to have the Cisco Wireless LAN controllers boot off the primary load (default), or revert to the backup load when desired.

Examples

> show boot
 
   
Primary Boot Image............................... 3.2.13.0 (active)
Backup Boot Image................................ 3.2.15.0

Related Commands

config exclusionlist
show client detail

show call-control ap

To see the metrics for successful calls or the traps generated for failed calls, use the show call-control ap command.

show call-control ap {802.11a | 802.11b} Cisco_AP {metrics | traps}

Syntax Description

show

Display settings.

call-control

Call control settings.

ap

Access point-related information.

802.11a | 802.11b

Specifies type of 802.11 network.

Cisco_AP

Cisco access point name.

metrics

Call metrics information.

traps

Trap info for call control.


Defaults

None.

Examples

> show call-control ap 802.11a Cisco_AP metrics
Total Call Duration in Seconds................... 120
Number of Calls.................................. 10
 
   
Number of calls for given client is................. 1
 
   
> show call-control ap 802.11a Cisco_AP traps
Number of traps sent in one min.................. 2
Last SIP error code.............................. 404
Last sent trap timestamp...................... Jun 20 10:05:06
 
   

To aid in troubleshooting, the output of this command shows an error code for any failed calls. Table 1-1 explains the possible error codes for failed calls.

Table 1-1 Error Codes for Failed VoIP Calls

Error Code
Integer
Description

1

unknown

Unknown error.

400

badRequest

The request could not be understood because of malformed syntax.

401

unauthorized

The request requires user authentication.

402

paymentRequired

Reserved for future use.

403

forbidden

The server understood the request but refuses to fulfill it.

404

notFound

The server has information that the user does not exist at the domain specified in the Request-URI.

405

methodNotallowed

The method specified in the Request-Line is understood but not allowed for the address identified by the Request-URI.

406

notAcceptable

The resource identified by the request is only capable of generating response entities with content characteristics that are not acceptable according to the Accept header field sent in the request.

407

proxyAuthenticationRequired

The client must first authenticate with the proxy.

408

requestTimeout

The server could not produce a response within a suitable amount of time, if it could not determine the location of the user in time.

409

conflict

The request could not be completed due to a conflict with the current state of the resource.

410

gone

The requested resource is no longer available at the server, and no forwarding address is known.

411

lengthRequired

The server is refusing to process a request because the request entity-body is larger than the server is willing or able to process.

413

requestEntityTooLarge

The server is refusing to process a request because the request entity-body is larger than the server is willing or able to process.

414

requestURITooLarge

The server is refusing to service the request because the Request-URI is longer than the server is willing to interpret.

415

unsupportedMediaType

The server is refusing to service the request because the message body of the request is in a format not supported by the server for the requested method.

420

badExtension

The server did not understand the protocol extension specified in a Proxy-Require or Require header field.

480

temporarilyNotAvailable

The callee's end system was contacted successfully, but the callee is currently unavailable.

481

callLegDoesNotExist

The UAS received a request that does not match any existing dialog or transaction.

482

loopDetected

The server has detected a loop.

483

tooManyHops

The server received a request that contains a Max-Forwards header field with the value zero.

484

addressIncomplete

The server received a request with a Request-URI that was incomplete.

485

ambiguous

The Request-URI was ambiguous.

486

busy

The callee's end system was contacted successfully, but the callee is currently not willing or able to take additional calls at this end system.

500

internalServerError

The server encountered an unexpected condition that prevented it from fulfilling the request.

501

notImplemented

The server does not support the functionality required to fulfill the request.

502

badGateway

The server, while acting as a gateway or proxy, received an invalid response from the downstream server it accessed in attempting to fulfill the request.

503

serviceUnavailable

The server is temporarily unable to process the request because of a temporary overloading or maintenance of the server.

504

serverTimeout

The server did not receive a timely response from an external server it accessed in attempting to process the request.

505

versionNotSupported

The server does not support or refuses to support the SIP protocol version that was used in the request.

600

busyEverywhere

The callee's end system was contacted successfully, but the callee is busy or does not want to take the call at this time.

603

decline

The callee's machine was contacted successfully, but the user does not want to or cannot participate.

604

doesNotExistAnywhere

The server has information that the user indicated in the Request-URI does not exist anywhere.

606

notAcceptable

The user's agent was contacted successfully, but some aspects of the session description (such as the requested media, bandwidth, or addressing style) were not acceptable.


Related Commands

config wlan call-snoop

show call-control client

show call-control client

To see call information for a call-aware client when VoIP snooping is enabled and the call is active, use the show call-control client command

show call-control client callInfo client_MAC_address

Syntax Description

show

Display settings.

call-control

Call control settings.

client

Client-related information.

callInfo

Call-control information information.

client_MAC_address

Client MAC address.


Defaults

None.

Examples

> show call-control client callInfo 10.10.10.10.10.10
 
   
Uplink IP/port...................................... 10.10.1.71 / 23870
Downlonk IP/port.................................... 10.10.1.47 / 2070
UP.................................................. 6
Calling Party....................................... sip:1054
Called Party........................................ sip:1000
Call ID............................................. 58635b00-850161b7-14853-1501a8
Number of calls for given client is................. 1

Related Commands

config wlan call-snoop

show call-control ap

show capwap reap association

To display the list of clients associated to an access point and their SSIDs, use the show capwap reap association command.

show capwap reap assocation

Syntax Description

show

Display settings.

capwap

Control and Provisioning of Wireless Access Points settings.

reap

Hybrid-REAP settings.

association

Display clients associated to this access point and their SSIDs.


Defaults

None.

Examples

> show capway reap association

Related Commands

config hreap group
show capwap reap status

show capwap reap status

To display the status of the hybrid-REAP access point (connected or standalone), use the show capwap reap status command.

show capwap reap status

Syntax Description

show

Display settings.

capwap

Control and Provisioning of Wireless Access Points settings.

reap

Hybrid-REAP settings.

status

Display status of the hybrid-REAP access point.


Defaults

None.

Examples

> show capwap reap status

Related Commands

config hreap group
show capwap reap association

show certificate compatibility

To display whether or not certificates are verified as compatible in the Cisco Wireless LAN controller, use the show certificate compatibility command.

show certificate compatibility

Syntax Description

show

Display settings.

certificate

All certificates.

compatibility

Compatibility of certificates.


Defaults

None.

Examples

> show certificate compatibility
 
   
Certificate compatibility mode:................ off

Related Commands

config certificate
config certificate lsc
show certificate lsc
show certificate summary
show local-auth certificates

show certificate lsc

To verify that the controller has generated an Locally Significant Certificate (LSC) certificate, use the show certificate lsc summary command.

show certificate lsc {summary | ap-provision}

Syntax Description

show

Display settings.

certificate

Certificate settings.

lsc

Locally Significant Certificate settings.

summary

Display a summary of LSC certificate settings and certificates.

ap-provision

Display details about the access points that are provisioned using LSC.


Defaults

None.

Examples

> show certificate lsc summary
 
   
LSC Enabled...................................... Yes
LSC CA-Server.................................... http://10.0.0.1:8080/caserver
LSC AP-Provisioning.............................. Yes
Provision-List............................... Not Configured
LSC Revert Count in AP reboots............... 3
LSC Params:
Country...................................... 4
State........................................ ca
City......................................... ss
Orgn......................................... org
Dept......................................... dep
Email........................................ dep@co.com
KeySize...................................... 390
LSC Certs:
CA Cert...................................... Not Configured
RA Cert...................................... Not Configured
 
   
> show certificate lsc ap-provision
 
   
LSC AP-Provisioning.............................. Yes
Provision-List................................... Present
 
   
Idx Mac Address
--- -------------
1 00:18:74:c7:c0:90

Related Commands

config certificate
config certificate lsc
show certificate compatibility
show certificate summary
show local-auth certificates

show certificate summary

To verify that the controller has generated a certificate, use the show certificate summary command.

show certificate summary

Syntax Description

show

Display settings.

certificate

All certificates.

summary

Synopsis of all certificates.


Defaults

None.

Examples

> show certificate summary
 
   
Web Administration Certificate................. Locally Generated
Web Authentication Certificate................. Locally Generated
Certificate compatibility mode:................ off

Related Commands

config certificate
config certificate lsc
show certificate compatibility
show certificate lsc
show local-auth certificates

Show Client Commands

Use the show client commands to display client settings.

show client ap

To display the clients on a Cisco lightweight access point, use the show client ap command.

show client ap 802.11{a | b} cisco_ap

Syntax Description

show

Display settings.

client

Client settings.

ap

Cisco lightweight access point settings.

802.11

802.11 network settings.

a | b

Enter a if the client access point resides on an 802.11a network.

Enter b if the client access point resides on an 802.11b network.

cisco_ap

Cisco lightweight access point name.


Usage Guidelines

The show client ap command may list the status of automatically disabled clients. Use the show exclusionlist command to view clients on the exclusion list (blacklisted).

Examples

> show client ap 802.11b AP1
 
   
MAC Address        AP Id   Status         WLAN Id    Authenticated
-----------------  ------  -------------  ---------  -------------
xx:xx:xx:xx:xx:xx      1   Associated     1          No

Related Commands

show client detail
show client summary
show client username
show exclusionlist

show client ccx client-capability

To view the client's capability information, use the show client ccx client-capability command.

show client ccx client-capability client_mac_address

Syntax Description

show

Display settings.

client

Client settings.

ccx

Cisco Compatible Extensions (CCX) settings.

client-capability

Display client capability information.

client_mac_address

Specifies the MAC address of the client.


Defaults

None.

Usage Guidelines

This command displays the client's available capabilities, not current settings for the capabilities.

Examples

> show client ccx client-capability 00:40:96:a8:f7:98 
Service Capability.................................. Voice, Streaming(uni-directional) 
Video, Interactive(bi-directional) Video
Radio Type.......................................... DSSS OFDM(802.11a) HRDSSS(802.11b) 
ERP(802.11g)
 
   
Radio Type.......................................... DSSS
	Radio Channels.................................. 1 2 3 4 5 6 7 8 9 10 11
	Tx Power Mode................................... Automatic
	Rate List(MB)................................... 1.0 2.0
 
   
Radio Type.......................................... HRDSSS(802.11b)
	Radio Channels.................................. 1 2 3 4 5 6 7 8 9 10 11
	Tx Power Mode................................... Automatic
	Rate List(MB)................................... 5.5 11.0
 
   
Radio Type.......................................... ERP(802.11g)
	Radio Channels.................................. 1 2 3 4 5 6 7 8 9 10 11
	Tx Power Mode................................... Automatic
	Rate List(MB)................................... 6.0 9.0 12.0 18.0 24.0 36.0 48.0 54.0
 
   
Are you sure you want to start? (y/N)y Are you sure you want to start? (y/N)

Related Commands

config client ccx get-client-capability
config client ccx get-operating-parameters
config client ccx get-profiles
config client ccx stats-request
show client ccx operating-parameters
show client ccx profiles
show client ccx stats-report

show client ccx frame-data

To view the data frames sent from the client for the last test, use the show client ccx frame-data command.

show client ccx frame-data client_mac_address

Syntax Description

show

Display settings.

client

Client settings.

ccx

Cisco Compatible Extensions (CCX) settings.

frame-data

Display client CCX data frames.

client_mac_address

Specifies the MAC address of the client.


Defaults

None.

Examples

> LOG Frames:
Frame Number ....................... 1
Last Frame Number .................. 1120
Direction .......................... 1
Timestamp .......................... 0d 00h 50m 39s 863954us
Frame Length ....................... 197
Frame Data:
00000000: 80 00 00 00 ff ff ff ff 	ff ff 00 12 44 bd bd b0 	............D...
00000010: 00 12 44 bd bd b0 f0 af 	43 70 00 f2 82 01 00 00 	..D.....Cp......
00000020:	64 00 11 08 00 01 00 01 		 08 8c 12 98 24 b0 48 60 	d...........$.H'
00000030: 6c 05 04 01 02 00 00 85 	1e 00 00 89 00 0f 00 ff 	1...............
00000040: 03 19 00 41 50 32 33 2d 	31 30 00 00 00 00 00 00 	...AP23-10......
00000050: 00 00 00 00 00 00 26 96 	06 00 40 96 00 ff ff dd	 ......&...@.....
00000060:	18 00 50 f2 01 01 00 00 	 50 f2 05 01 00 00 50 f2	 	..P.....P.....P.
00000070:	05 01 00 00 40 96 00 28 	 00 dd 06 00 40 96 01 01	 	....@..(....@...
 
   
00000080: 00 dd 05 00 40 96 03 04 	dd 16 00 40 96 04 00 02 	....@......@....
00000090: 07 a4 00 00 23 a4 00 00 	42 43 00 00 62 32 00 00	 	....#...BC..b2..
000000a0:	dd 05 00 40 96 0b 01 dd 	 18 00 50 f2 02 01 01 82 	...@......P.....
000000b0:	00 03 a4 00 00 27 a4 00 	 00 42 43 5e 00 62 32 2f 	.....'...BC^.b2/
 
   
> LOG Frames:
Frame Number ....................... 2
Last Frame Number .................. 1120
Direction .......................... 1
Timestamp .......................... 0d 00h 50m 39s 878289us
Frame Length ....................... 147
Frame Data:
00000000: 80 00 00 00 ff ff ff ff 	ff ff 00 0d ed c3 a0 22 	..............."
00000010: 00 0d ed c3 a0 22 00 bd 	4d 50 a5 f7 78 08 00 00 	....."..MP..x...
00000020:	64 00 01 00 00 01 00 01 		 08 8c 12 98 24 b0 48 60 	d...........$.H'
00000030: 6c 05 04 01 02 00 00 85 	1e 00 00 84 00 0f 00 ff 	1...............
00000040: 03 19 00 72 6f 67 75 65 	2d 74 65 73 74 31 00 00 	...rogue-test1..
00000050: 00 00 00 00 00 00 23 96 	06 00 40 96 00 10 00 dd	 ......#...@.....
00000060:	06 00 40 96 01 01 00 dd 	 05 00 40 96 03 04 dd 05	 		....@.......@...
00000070:	00 40 96 0b 01 dd 18 00 	 50 f2 02 01 01 81 00 03	 	....@.......@...
00000080: a4 00 00 27 a4 00 00 42 	43 5e 00 62 32 2f 00 d2 	...'...BC^.b2/..
00000090: b4 ab 84 					 	 									...
 
   
> LOG Frames:
Frame Number ....................... 3
Last Frame Number .................. 1120
Direction .......................... 1
Timestamp .......................... 0d 00h 50m 39s 881513us
Frame Length ....................... 189
Frame Data:
00000000: 80 00 00 00 ff ff ff ff 	ff ff 00 12 44 bd 80 30 	............D..0
00000010: 00 12 44 bd 80 30 60 f7	 46 c0 8b 4b d1 05 00 00 	..D..0'.F..K....
00000020:	64 00 11 08 00 01 00 01 		 08 8c 12 98 24 b0 48 60 	d...........$.H'
00000030: 6c 05 04 00 02 00 00 85 	1e 00 00 89 00 0f 00 ff 	1...............
00000040: 03 19 00 41 50 34 30 2d 	31 37 00 00 00 00 00 00 	...AP23-10......
00000050: 00 00 00 00 00 00 26 dd 	18 00 50 f2 01 01 00 00	 ......&...P.....
00000060:	50 f2 05 01 00 00 50 f2 	 05 01 00 00 40 96 00 28	 	P.....P.....@..(
00000070:	00 dd 06 00 40 96 01 01 	 00 dd 05 00 40 96 03 04	 	....@.......@...
 
   
00000080: dd 16 00 40 96 04 00 05 	07 a4 00 00 23 a4 00 00 	....@......#....
00000090: 42 43 00 00 62 32 00 00 	dd 05 00 40 96 0b 01 dd	 	BC..b2.....@....
000000a0:	18 00 50 f2 02 01 01 85 	 00 03 a4 00 00 27 a4 00 	..P..........'..
000000b0:	00 42 43 5e 00 62 32 2f 	 00 0b 9a 1d 6f 		 	 	 	 	 	 	 	 	 	.BC^.b2/....o...

Related Commands

show client ccx last-response-status

show client ccx last-response-status

To view the status of the last test response, use the show client ccx last-response-status command.

show client ccx last-response-status client_mac_address

Syntax Description

show

Display settings.

client

Client settings.

ccx

Cisco Compatible Extensions (CCX) settings.

last-response-status

Display the status of the last CCX client test response.

client_mac_address

Specifies the MAC address of the client.


Defaults

None.

Examples

> show client ccx last-response-status 
Test Status ........................ Success
 
   
Response Dialog Token.............. 87
Response Status.................... Successful
Response Test Type................. 802.1x Authentication Test
Response Time...................... 3476 seconds since system boot

Related Commands

config client ccx default-gw-ping
config client ccx dhcp
config client ccx dns-ping
config client ccx dns-resolve
config client ccx test-association
config client ccx test-dot1x
config client ccx test-profile
config client ccx test-abort
config client ccx clear-results
config client ccx send-message
show client ccx last-response-status
show client ccx results
show client ccx frame-data

show client ccx last-test-status

To view the status of the last test, use the show client ccx last-test-status command.

show client ccx last-test-status client_mac_address

Syntax Description

show

Display settings.

client

Client settings.

ccx

Cisco Compatible Extensions (CCX) settings.

last-test-status

Display the status of the last CCX client test.

client_mac_address

Specifies the MAC address of the client.


Defaults

None.

Examples

> show client ccx last-test-status
 
Test Type ........................ Gateway Ping Test
Test Status ...................... Pending/Success/Timeout
Dialog Token ..................... 15
Timeout .......................... 15000 ms
Request Time ..................... 1329 seconds since system boot

Related Commands

config client ccx default-gw-ping
config client ccx dhcp
config client ccx dns-ping
config client ccx dns-resolve
config client ccx test-association
config client ccx test-dot1x
config client ccx test-profile
config client ccx test-abort
config client ccx clear-results
config client ccx send-message
show client ccx last-response-status
show client ccx results
show client ccx frame-data

show client ccx log-response

To display a log response, use the show client ccx log-response command.

show client ccx log-response [ roam | rsna | syslog] client_mac_address

Syntax Description

show

Display settings.

client

Client settings.

ccx

Cisco Compatible Extensions (CCX) settings.

log-response

Display a CCX client log response.

roam

Displays CCX client roaming log response.

rsna

Displays CCX client RSNA log response.

syslog

Displays CCX client system log response.

client_mac_address

Displays the inventory for the specified access point.


Defaults

None.

Examples

> config client ccx log-request syslog 00:40:96:a8:f7:98 
> show client ccx log-response syslog 00:40:96:a8:f7:98 
Tue Jun 26 18:07:48 2007		 		 	Syslog Response LogID=131: Status=Successful
						 	Event Timestamp=0d 00h 19m 42s 278987us
							Client SysLog = `<11> Jun 19 11:49:47 unraval13777 Mandatory 
elements missing in the OID response'
							Event Timestamp=0d 00h 19m 42s 278990us
							Client SysLog = `<11> Jun 19 11:49:47 unraval13777 Mandatory 
elements missing in the OID response'
Tue Jun 26 18:07:48 2007		 		 	Syslog Response LogID=131: Status=Successful
						 	Event Timestamp=0d 00h 19m 42s 278987us
							Client SysLog = `<11> Jun 19 11:49:47 unraval13777 Mandatory 
elements missing in the OID response'
							Event Timestamp=0d 00h 19m 42s 278990us
							Client SysLog = `<11> Jun 19 11:49:47 unraval13777 Mandatory 
elements missing in the OID response'
 
   
 
   
> config client ccx log-request roam 00:40:96:a8:f7:98
> show client ccx log-response roam 00:40:96:a8:f7:98
 
   
Thu Jun 22 11:55:14 2007 	 	Roaming Response LogID=20: Status=Successful
						Event Timestamp=0d 00h 00m 13s 322396us
						Source BSSID=00:40:96:a8:f7:98, Target BSSID=00:0b:85:23:26:70, 
						Transition Time=100(ms) 
						Transition Reason: Normal roam, poor link
						Transition Result: Success
Thu Jun 22 11:55:14 2007 	 	Roaming Response LogID=133: Status=Successful
						Event Timestamp=0d 00h 00m 16s 599006us
						Source BSSID=00:0b:85:81:06:c2, Target BSSID=00:0b:85:81:06:c2, 
						Transition Time=3235(ms) 
						Transition Reason: Normal roam, poor link
						Transition Result: Success
Thu Jun 22 18:28:48 2007 	 	Roaming Response LogID=133: Status=Successful
						Event Timestamp=0d 00h 00m 08s 815477us
						Source BSSID=00:0b:85:81:06:c2, Target BSSID=00:0b:85:81:06:d2, 
						Transition Time=3281(ms) 
						Transition Reason: First association to WLAN
						Transition Result: Success
 
   
> config client ccx log-request rsna 00:40:96:a8:f7:98
> show client ccx log-response rsna 00:40:96:a8:f7:98
 
   
Tue Oct 05 11:06:48 2006  
RSNA Response LogID=2: Status=Successful
Event Timestamp=242424242424
Target BSSID=00:0b:85:23:26:70
RSNA Version=1
Group Cipher Suite=00-0f-ac-01 
Pairwise Cipher Suite Count = 2
Pairwise Cipher Suite 0 = 00-0f-ac-02 
Pairwise Cipher Suite 1 = 00-0f-ac-04 
AKM Suite Count = 2 
KM Suite 0 = 00-0f-ac-01 
KM Suite 1 = 00-0f-ac-02 
SN Capability = 0x1 
PMKID Count = 2 
PMKID 0 = 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 
PMKID 1 = 0a 0b 0c 0d 0e 0f 17 18 19 20 1a 1b 1c 1d 1e 1f 
802.11i Auth Type: EAP_FAST
RSNA Result: Success
Tue Oct 05 11:05:48 2006  
RSNA Request LogID=2

Related Commands

config client ccx log-request

show client ccx manufacturer-info

To view the client manufacturing information, use the show client ccx manufacturer-info command.

show client ccx manufacturer-info client_mac_address

Syntax Description

show

Display settings.

client

Client settings.

ccx

Cisco Compatible Extensions (CCX) settings.

manufacturer-info

Display CCX client technical specifications.

client_mac_address

Specifies the MAC address of the client.


Examples

> show client ccx manufacturer-info 00:40:96:a8:f7:98 
Manufacturer OUI .............................. 00:40:96
Manufacturer ID ............................... Cisco
Manufacturer Model ............................ Cisco Aironet 802.11a/b/g Wireless Adapter
Manufacturer Serial ........................... FOC1046N3SX
Mac Address ................................... 00:40:96:b2:8d:5e
Radio Type .................................... DSSS OFDM(802.11a) HRDSSS(802.11b)
  ERP(802.11g)
Antenna Type .................................. Omni-directional diversity
Antenna Gain .................................. 2 dBi
 
   
Rx Sensitivity:
Radio Type ...................................... DSSS
Rx Sensitivity .................................. Rate:1.0 Mbps, MinRssi:-95, MaxRss1:-30
Rx Sensitivity .................................. Rate:2.0 Mbps, MinRssi:-95, MaxRss1:-30
Radio Type ...................................... HRDSSS(802.11b)
Rx Sensitivity .................................. Rate:5.5 Mbps, MinRssi:-95, MaxRss1:-30
Rx Sensitivity .................................. Rate:11.0 Mbps, MinRssi:-95, MaxRss1:-30
Radio Type ...................................... ERP(802.11g)
Rx Sensitivity .................................. Rate:6.0 Mbps, MinRssi:-95, MaxRss1:-30
Rx Sensitivity .................................. Rate:9.0 Mbps, MinRssi:-95, MaxRss1:-30
Rx Sensitivity .................................. Rate:12.0 Mbps, MinRssi:-95, MaxRss1:-30
Rx Sensitivity .................................. Rate:18.0 Mbps, MinRss1:-95, MaxRss1:-30

Related Commands

config client ccx get-profiles
config client ccx get-operating-parameters
config client ccx get-manufacturer-info
config client ccx get-client-capability
show client ccx profiles
show client ccx operating-parameters
show client ccx client-capability
config client ccx stats-request
show client ccx stats-report

show client ccx operating-parameters

To view the client operating-parameters, use the show client ccx operating-parameters command.

show client ccx operating-parameters client_mac_address

Syntax Description

show

Display settings.

client

Client settings.

ccx

Cisco Compatible Extensions (CCX) settings.

operating-parameters

Display a CCX client configuration settings.

client_mac_address

Specifies the MAC address of the client.


Examples

> show client ccx operating-parameters 00:40:96:a8:f7:98 
 
   
Client Mac ......................................... 00:40:96:b2:8d:5e
Radio Type ......................................... OFDM(802.11a)
 
   
Radio Type ......................................... OFDM(802.11a)
	Radio Channels ................................. 36 40 44 48 52 56 60 64 100 104 108 
112 116 120 124 128 132 136 140 149 153 157 161 165
	Tx Power Mode .................................. Automatic
	Rate List(MB)................................... 6.0 9.0 12.0 18.0 24.0 36.0 48.0 54.0
 
   
Power Save Mode .................................... Normal Power Save
SSID ............................................... wifi
Security Parameters[EAP Method, Credential]......... None
Auth Method ........................................ None
Key Management...................................... None
Encryption ......................................... None
Device Name ........................................ Wireless Network Connection 15
Device Type ........................................ 0
OS Id .............................................. Windows XP
OS Version ......................................... 5.1.6.2600 Service Pack 2
IP Type ............................................ DHCP address
IPv4 Address ....................................... Available
IP Address ......................................... 70.0.4.66
Subnet Mask ........................................ 255.0.0.0
Default Gateway .................................... 70.1.0.1
IPv6 Address ....................................... Not Available
IPv6 Address ....................................... 0:0:0:0:0:0:0:0:0:0:0:0:0:0:0:0:
IPv6 Subnet Mask ................................... 0:0:0:0:0:0:0:0:0:0:0:0:0:0:0:0:
DNS Servers ........................................ 103.0.48.0
WINS Servers ....................................... 
System Name ........................................ URAVAL3777
Firmware Version ................................... 4.0.0.187
Driver Version ..................................... 4.0.0.187

Related Commands

config client ccx get-client-capability
config client ccx get-manufacturer-info
config client ccx get-operating-parameters
config client ccx get-profiles

show client ccx profiles

To view the client profiles, use the show client ccx profiles command.

show client ccx profiles client_mac_address

Syntax Description

show

Display settings.

client

Client settings.

ccx

Cisco Compatible Extensions (CCX) settings.

profiles

Display profiles for a CCX client.

client_mac_address

Specifies the MAC address of the client.


Examples

> show client ccx profiles 00:40:96:a8:f7:98 
Number of Profiles .................................. 1
Current Profile ..................................... 1
 
   
Profile ID .......................................... 1
Profile Name ........................................ wifiEAP
SSID ................................................ wifiEAP
Security Parameters [EAP Method, Credential]......... EAP-TLS, Host OS Login Credentials
Auth Method ......................................... EAP
Key Management ...................................... WPA2+CCKM
Encryption .......................................... AES-CCMP
Power Save Mode ..................................... Constantly Awake
Radio Configuration:
Radio Type........................................... DSSS
	Preamble Type.................................... Long preamble
	CCA Method....................................... Energy Detect + Carrier
Detect/Correlation
	Data Retries..................................... 6
	Fragment Threshold............................... 2342
	Radio Channels................................... 1 2 3 4 5 6 7 8 9 10 11
	Tx Power Mode.................................... Automatic
	Rate List (MB)................................... 1.0 2.0
 
   
Radio Type........................................... HRDSSS(802.11b)
	Preamble Type.................................... Long preamble
	CCA Method....................................... Energy Detect + Carrier
Detect/Correlation
	Data Retries..................................... 6
	Fragment Threshold............................... 2342
	Radio Channels................................... 1 2 3 4 5 6 7 8 9 10 11
	Tx Power Mode.................................... Automatic
	Rate List(MB).................................... 5.5 11.0
 
   
Radio Type........................................... ERP(802.11g)
	Preamble Type.................................... Long preamble
	CCA Method....................................... Energy Detect + Carrier
Detect/Correlation
	Data Retries..................................... 6
	Fragment Threshold............................... 2342
	Radio Channels................................... 1 2 3 4 5 6 7 8 9 10 11
	Tx Power Mode.................................... Automatic
	Rate List (MB)................................... 6.0 9.0 12.0 18.0 24.0 36.0 48.0 
54.0
 
   
Radio Type........................................... OFDM(802.11a)
	Preamble Type.................................... Long preamble
	CCA Method....................................... Energy Detect + Carrier
Detect/Correlation
	Data Retries..................................... 6
	Fragment Threshold............................... 2342
	Radio Channels................................... 36 40 44 48 52 56 60 64 149 153 157 
161 165
	Tx Power Mode.................................... Automatic
	Rate List (MB)................................... 6.0 9.0 12.0 18.0 24.0 36.0 48.0 
54.0
	

Related Commands

config client ccx get-client-capability
config client ccx get-manufacturer-info
config client ccx get-operating-parameters
config client ccx get-profiles

show client ccx results

To view the results from the last successful diagnostic test, use the show client ccx results command.

show client ccx results client_mac_address

Syntax Description

show

Display settings.

client

Client settings.

ccx

Cisco Compatible Extensions (CCX) settings.

results

Display the results of the last successful diagnostic test for the CCX client.

client_mac_address

Specifies the MAC address of the client.


Examples

Information similar to the following appears for the 802.1x authentication test:
 
   
dot1x Complete....................................... Success
EAP Method........................................... *1,Host OS Login Credentials
dot1x Status......................................... 255

Related Commands

config client ccx test-abort
config client ccx test-association
config client ccx test-dot1x
config client ccx test-profile
config client ccx clear-reports
config client ccx clear-results

show client ccx rm

To display CCX client radio managmenet report information, use the show client ccx rm commands.

show client ccx rm client_MAC [ status |
report ( chan-load | noise-hist | frame request | beacon | frame )]

Syntax Description

show

Display settings.

client

Client settings.

ccx

Cisco Compatible Extensions (CCX) settings.

rm

Radio management settings.

client_MAC

Specifies the client MAC address.

status

Displays client ccx radio management status information.

report

Displays client ccx radio management report.

chan-load

Displays radio management channel load reports.

noise-hist

Displays radio management noise histogram reports.

beacon

Displays radio managemant beacon load reports.

frame

Displays radio management frame reports.


Examples

> show client ccx rm 00:40:96:15:21:ac status
 
   
Client Mac Address............................... 00:40:96:15:21:ac 
Channel Load Request............................. Enabled 
Noise Histogram Request.......................... Enabled 
Beacon Request................................... Enabled 
Frame Request.................................... Enabled 
Interval......................................... 30 
Iteration........................................... 10
 
   
 
   
> show client ccx rm 00:40:96:15:21:ac report chan-load
Channel Load Report 
Client Mac Address............................... 00:40:96:ae:53:bc 
Timestamp........................................ 788751121 
Incapable Flag................................... On 
Refused Flag........................................ On 
Chan CCA Busy Fraction 
----------------------- 
1 	194 
2 	86  
3 	103 
4 	0  
5 	178 
6 	82  
7 	103 
8 	95  
9 	13  
10 	222 
11 	75 
 
   
 
   
> show client ccx rm 00:40:96:15:21:ac report noise-hist  
Noise Histogram Report 
Client Mac Address............................... 00:40:96:15:21:ac 
Timestamp........................................ 4294967295 
Incapable Flag................................... Off 
Refused Flag........................................ Off 
Chan RPI0 RPI1 RPI2 RPI3 RPI4 RPI5 RPI6 RPI7 

 
   
> show client ccx rm 00:40:96:ae:53:bc report beacon  
Beacon Report 
Client Mac Address............................... 00:40:96:ae:53:bc 
Timestamp....................................... 788853242 
Incapable Flag.................................. On 
Refused Flag....................................... On 
 
Channel No...................................... 3  
Phy Type........................................ ERP 
Received signal Power........................... -80dbm 
BSSID........................................... 00:12:7f:50:93:10 
Parent TFS...................................... bc729d5e 
Parent TFS...................................... 42f637ec02000000 
Beacon Interval................................. 100 
Capability Information............................. 0401 
 
Channel No...................................... 7  
Phy Type........................................ ERP 
Received signal Power........................... -62dbm 
BSSID........................................... 00:12:44:b3:b9:e0 
Parent TFS...................................... 4f46aa5e 
Parent TFS...................................... bd1ba60f00000000 
Beacon Interval................................. 100 
Capability Information............................. 0421
 
   
 
   
> show client ccx rm 00:40:96:ae:53:bc report frame  
Frame Report 
Client Mac Address.............................. 00:40:96:ae:53:bc 
Timestamp....................................... 789140437 
Incapable Flag.................................. On 
Refused Flag....................................... On 
Chan Tx Address Bssid RcxSigPwr Frame Count 
--------------------------------------------------------------
 
   

Related Commands

config client ccx default-gw-ping
config client ccx dhcp
config client ccx dns-ping
config client ccx dns-resolve
config client ccx test-association
config client ccx test-dot1x
config client ccx test-profile
config client ccx test-abort
config client ccx clear-results
config client ccx send-message

show client ccx stats-report

To display the CCX statistics report from a specified client device, use the show slient ccx stats-report command.

show client ccx stats-report client_mac_address

Syntax Description

show

Display settings.

client

Client settings.

ccx

Cisco Compatible Extensions (CCX) settings.

stats-report

Display a CCX client statistics report.

client_mac_address

Displays the MAC address for the specified client device.


Defaults

None.

Examples

> config client ccx stats-request 1 dot11 00:40:96:a8:f7:98 
> show client ccx stats-report 00:40:96:a8:f7:98 
 
   
Measurement duration = 1
 
   
dot11TransmittedFragmentCount       = 1
dot11MulticastTransmittedFrameCount = 2
dot11FailedCount                    = 3
dot11RetryCount                     = 4
dot11MultipleRetryCount             = 5
dot11FrameDuplicateCount            = 6
dot11RTSSuccessCount                = 7
dot11RTSFailureCount                = 8
dot11ACKFailureCount                = 9
dot11ReceivedFragmentCount          = 10
dot11MulticastReceivedFrameCount    = 11
dot11FCSErrorCount                  = 12
dot11TransmittedFrameCount          = 13
 
   
 
   

Related Commands

config client ccx default-gw-ping
config client ccx dhcp
config client ccx dns-ping
config client ccx dns-resolve
config client ccx test-association
config client ccx test-dot1x
config client ccx test-profile
config client ccx test-abort
config client ccx clear-results
config client ccx send-message

show client detail

To display detailed information for a client on a Cisco lightweight access point, use the show client detail command.

show client detail mac_address

Syntax Description

show

Display settings.

client

Display client settings.

detail

Connectivity information.

mac_address

MAC address of the specific client.


Usage Guidelines

The show client ap command may list the status of automatically disabled clients. Use the show exclusionlist command to view clients on the exclusion list (blacklisted).

Examples

> show client detail 00:0c:41:07:33:a6
 
   
Client MAC Address............................... 00:16:36:40:ac:58
Client Username.................................. N/A
Client State..................................... Associated
Client NAC OOB State............................. QUARANTINE
Guest LAN Id..................................... 1
IP Address....................................... Unknown
Session Timeout.................................. 0
QoS Level........................................ Gold
Diff Serv Code Point (DSPC)...................... disabled
Mobility State................................... Local
Internal Mobility State.......................... apfMsMmInitial
Security Policy Completed........................ No
Policy Manager State............................. WEBAUTH_REQD
Policy Manager Rule Created...................... Yes
NPU Fast Fast Notified........................... Yes
Last Policy Manager State........................ WEBAUTH_REQD
Client Entry Create Time......................... 460 seconds
Interface........................................ wired-guest
VLAN............................................. 236
Quarantine VLAN.................................. 0
Client Statistics:
	Number of Bytes Received..................... 0
	Number of Bytes Sent......................... 0
	Number of Packets Received................... 0
	Number of Packets Sent....................... 0
	Number of EAP Id Request Msg Timeouts........ 0
	Number of EAP Id Request Msg Failures........ 0
	Number of EAP Request Msg Timeouts........... 2
	Number of EAP Request Msg Failures........... 1
	Number of EAP Key Msg Timeouts............... 0
	Number of EAP Key Msg Failures............... 0
	Number of Policy Errors...................... 0
	Radio Signal Strength Indicator.............. Unavailable
	Signal to Noise Ratio........................ Unavailable
...

Related Commands

Show Client Commands
Configure Client Commands

show client location-calibration summary

To display client location calibration summary information, use the show client lcoation-calibration summary command.

show client location-calibration summary

Syntax Description

show

Display settings.

client

Display client settings.

location-calibration

Display client location calibration information.

summary

Summarize client location calibration information.


Examples

> show client location-calibration summary
 
   
MAC Address Inerval 
----------- ----------
10:10:10:10:10:10 60
21:21:21:21:21:21 45

Related Commands

Show Client Commands
Configure Client Commands

show client roam-history

To display the roaming history of a specified client, use the show client roam-history command.

show client roam-history mac_addr

Syntax Description

show

Display settings.

client

Display client settings.

roam-history

Display roaming history information for a specified client.

mac_addr

MAC address of specified client.


Examples

> show client roam-history 00:14:6c:0a:57:77

Related Commands

Show Client Commands
Configure Client Commands

show client summary

To display a summary of clients associated with a Cisco lightweight access point, use the show client summary command.

show client summary

Syntax Description

show

Display settings.

client

802.11a or 802.11b/g client.

summary

All attached clients.


Usage Guidelines

The show client ap command may list the status of automatically disabled clients. Use the show exclusionlist command to view clients on the exclusion list (blacklisted).

Examples

> show client summary
 
   
Number of Clients................................ 24
 
   
MAC Address        AP Name            Status         WLAN  Auth  Protocol  Port
-----------------  -----------------  -------------  ----  ----  --------  ----
xx:xx:xx:xx:xx:xx  AP02               Probing        N/A   No    802.11a   1
xx:xx:xx:xx:xx:xx  AP02               Probing        N/A   No    802.11a   1
xx:xx:xx:xx:xx:xx  AP02               Probing        N/A   No    802.11b   1
xx:xx:xx:xx:xx:xx  AP02               Probing        N/A   No    802.11a   1
xx:xx:xx:xx:xx:xx  AP02               Probing        N/A   No    802.11b   1
xx:xx:xx:xx:xx:xx  AP02               Associated     2     Yes   802.11b   1
xx:xx:xx:xx:xx:xx  AP02               Probing        N/A   No    802.11b   1
xx:xx:xx:xx:xx:xx  AP02               Probing        N/A   No    802.11b   1
xx:xx:xx:xx:xx:xx  AP02               Probing        N/A   No    802.11b   1
xx:xx:xx:xx:xx:xx  AP02               Probing        N/A   No    802.11a   1
xx:xx:xx:xx:xx:xx  AP02               Probing        N/A   No    802.11a   1
xx:xx:xx:xx:xx:xx  AP02               Probing        N/A   No    802.11b   1
xx:xx:xx:xx:xx:xx  AP02               Probing        N/A   No    802.11a   1
xx:xx:xx:xx:xx:xx  AP02               Probing        N/A   No    802.11a   1
 
   
Number of Clients................................ 2

Related Commands

Show Client Commands
Configure Client Commands

show client summary guest-lan

To display the active wired guest LAN clients, use the show client summary guest-lan command.

show client summary guest-lan

Syntax Description

show

Display settings.

client

802.11a or 802.11b/g client.

summary

All attached clients.

guest-LAN

Indicates the active wired guest LAN.


Examples

> show client summary
 
   
Number of Clients................................ 1
MAC Address       AP Name      Status         WLAN  Auth   Protocol  Port Wired
-----------       ---------    ----------     ----  ----   --------  ---- -----
00:16:36:40:ac:58  N/A         Associated        1    No      802.3     1   Yes

Related Commands

Show Client Commands
Configure Client Commands

show client username

To display client data by username, use the show client username command.

show client username username

Syntax Description

show

Display settings.

client

Displays client data.

username

Cisco radio.

username

Client's username.


Examples

> show client username IT_007
 
   
MAC Address        AP ID   Status         WLAN Id    Authenticated
-----------------  ------  -------------  ---------  -------------
xx:xx:xx:xx:xx:xx  1       Associated     1          No

Related Commands

show client ap

show client detail

show client summary

show country

To display the configured country and the radio types supported, use the show country channels command.

show country

This command has no arguments or keywords.

Examples

> show country
 
   
Configured Country............................. United States
Configured Country Codes
US  - United States............................. 802.11a / 802.11b / 802.11g
 
   

Related Commands

config country

display country supported

show country channels

show country channels

To display the radio channels supported in the configured country, use the show country channels command.

show country channels

Syntax Description

This command has no arguments or keywords.

Examples

> show country channels
 
   
Configured Country............................. United States
      KEY: * = Channel is legal in this country and may be configured manually.
           A = Channel is the Auto-RF default in this country.
           . = Channel is not legal in this country.
           C = Channel has been configured for use by Auto-RF.
           x = Channel is available to be configured for use by Auto-RF.
---------:+-+-+-+-+-+-+-+-+-+-+-+-+-+-
802.11BG :
Channels :                   1 1 1 1 1
         : 1 2 3 4 5 6 7 8 9 0 1 2 3 4
---------:+-+-+-+-+-+-+-+-+-+-+-+-+-+-
     US  : A * * * * A * * * * A . . .
---------:+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-
 802.11A :  1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Channels : 3 3 3 4 4 4 4 4 5 5 6 6 0 0 0 1 1 2 2 2 3 3 4 4 5 5 6 6
         : 4 6 8 0 2 4 6 8 2 6 0 4 0 4 8 2 6 0 4 8 2 6 0 9 3 7 1 5
---------:+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-
     US  : . A . A . A . A A A A A * * * * * . . . * * * A A A A *
---------:+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-

Related Commands

config country
display country supported
show country

show country supported

To display a list of the supported country options, use the show country supported command.

show country supported

Syntax Description

This command has no arguments or keywords.

Examples

> show country supported
CConfigured Country............................. United States
Supported Country Codes
AR  - Argentina................................. 802.11a / 802.11b / 802.11g
AT  - Austria................................... 802.11a / 802.11b / 802.11g
AU  - Australia................................. 802.11a / 802.11b / 802.11g
BR  - Brazil.................................... 802.11a / 802.11b / 802.11g
BE  - Belgium................................... 802.11a / 802.11b / 802.11g
BG  - Bulgaria.................................. 802.11a / 802.11b / 802.11g
CA  - Canada.................................... 802.11a / 802.11b / 802.11g
CH  - Switzerland............................... 802.11a / 802.11b / 802.11g
CL  - Chile.....................................           802.11b / 802.11g
CN  - China..................................... 802.11a / 802.11b / 802.11g
CO  - Colombia..................................           802.11b / 802.11g
CY  - Cyprus.................................... 802.11a / 802.11b / 802.11g
CZ  - Czech Republic............................ 802.11a / 802.11b
DE  - Germany................................... 802.11a / 802.11b / 802.11g
DK  - Denmark................................... 802.11a / 802.11b / 802.11g
EE  - Estonia................................... 802.11a / 802.11b / 802.11g
ES  - Spain..................................... 802.11a / 802.11b / 802.11g
FI  - Finland................................... 802.11a / 802.11b / 802.11g
FR  - France.................................... 802.11a / 802.11b / 802.11g
GB  - United Kingdom............................ 802.11a / 802.11b / 802.11g
GI  - Gibraltar................................. 802.11a / 802.11b / 802.11g
GR  - Greece.................................... 802.11a / 802.11b / 802.11g
HK  - Hong Kong................................. 802.11a / 802.11b / 802.11g
HU  - Hungary................................... 802.11a / 802.11b / 802.11g
ID  - Indonesia.................................           802.11b / 802.11g
IE  - Ireland................................... 802.11a / 802.11b / 802.11g
IN  - India..................................... 802.11a / 802.11b / 802.11g
IL  - Israel.................................... 802.11a / 802.11b / 802.11g
ILO - Israel (outdoor)..........................           802.11b / 802.11g
IS  - Iceland................................... 802.11a / 802.11b / 802.11g
IT  - Italy..................................... 802.11a / 802.11b / 802.11g
JP  - Japan (J)................................. 802.11a / 802.11b / 802.11g
J2  - Japan 2(P)................................ 802.11a / 802.11b / 802.11g
J3  - Japan 3(U)................................ 802.11a / 802.11b / 802.11g
KR  - Korea Republic (C)........................ 802.11a / 802.11b / 802.11g
KE  - Korea Extended (K)........................ 802.11a / 802.11b / 802.11g
LI  - Liechtenstein............................. 802.11a / 802.11b / 802.11g
LT  - Lithuania................................. 802.11a / 802.11b / 802.11g
LU  - Luxembourg................................ 802.11a / 802.11b / 802.11g
LV  - Latvia.................................... 802.11a / 802.11b / 802.11g
MC  - Monaco.................................... 802.11a / 802.11b / 802.11g
MT  - Malta..................................... 802.11a / 802.11b / 802.11g
MX  - Mexico.................................... 802.11a / 802.11b / 802.11g
MY  - Malaysia.................................. 802.11a / 802.11b / 802.11g
NL  - Netherlands............................... 802.11a / 802.11b / 802.11g
NZ  - New Zealand............................... 802.11a / 802.11b / 802.11g
NO  - Norway.................................... 802.11a / 802.11b / 802.11g
PA  - Panama....................................           802.11b / 802.11g
PE  - Peru......................................           802.11b / 802.11g
PH  - Philippines............................... 802.11a / 802.11b / 802.11g
PL  - Poland.................................... 802.11a / 802.11b / 802.11g
PT  - Portugal.................................. 802.11a / 802.11b / 802.11g
RU  - Russian Federation........................ 802.11a / 802.11b / 802.11g
RO  - Romania................................... 802.11a / 802.11b / 802.11g
SA  - Saudi Arabia.............................. 802.11a / 802.11b / 802.11g
SE  - Sweden.................................... 802.11a / 802.11b / 802.11g
SG  - Singapore................................. 802.11a / 802.11b / 802.11g
SI  - Slovenia.................................. 802.11a / 802.11b / 802.11g
SK  - Slovak Republic........................... 802.11a / 802.11b / 802.11g
TH  - Thailand..................................           802.11b / 802.11g
TR  - Turkey....................................           802.11b / 802.11g
TW  - Taiwan.................................... 802.11a / 802.11b / 802.11g
UA  - Ukraine................................... 802.11a / 802.11b / 802.11g
US  - United States............................. 802.11a / 802.11b / 802.11g
USL - United States (Legacy).................... 802.11a / 802.11b / 802.11g
USX - United States (US + chan165).............. 802.11a / 802.11b / 802.11g
VE  - Venezuela.................................           802.11b / 802.11g
ZA  - South Africa.............................. 802.11a / 802.11b / 802.11g
 
   

Related Commands

config country
display country channels
show country

show coredump summary

To display a summary of the controller's core dump file, use the show coredump summary command.

show coredump summary

Syntax Description

This command has no arguments or keywords.

Examples

> show coredump summary
Core Dump is enabled
FTP Server IP.................................... 10.10.10.17
FTP Filename..................................... file1
FTP Username..................................... ftpuser
FTP Password.................................. *********

Related Commands

config coredump
config coredump ftp
config coredump username

show cpu

To display current WLAN Controller CPU usage information, use the show cpu command.

show cpu

Syntax Description

This command has no arguments or keywords.

Examples

> show cpu
 
   
Current CPU load: 2.50%

Related Commands

show sysinfo

show custom-web

To display web authentication customization information, use the show custom-web command.

show custom-web

Syntax Description

This command has no arguments or keywords.

Examples

> show custom-web
 
   
Radius Authentication Method..................... PAP
Cisco Logo....................................... Enabled
CustomLogo....................................... None
Custom Title..................................... None
Custom Message................................... None
Custom Redirect URL.............................. None
External web authentication Mode................. Disabled
External web authentication URL.................. None

Related Commands

config custom-web

show database summary

To display the maximum number of entries in the database, use the show database summary command.

show database summary

Syntax Description

This command has no arguments or keywords.

Examples

> show database summary
 
   
Maximum Database Entries......................... 2048
Maximum Database Entries On Next Reboot.......... 2048
Database Contents
    MAC Filter Entries........................... 2
    Exclusion List Entries....................... 0
    AP Authorization List Entries................ 1
    Management Users............................. 1
    Local Network Users.......................... 1
        Local Users.............................. 1
        Guest Users.............................. 0
    Total..................................... 5
 
   

Related Commands

config database size

show debug

Use the show debug command to determine if MAC address and other flag debugging is enabled or disabled.

show debug

Syntax Description

show

Display settings.

debug

MAC address debugging.


Examples

> show debug
 
   
MAC debugging............................... disabled
 
   
Debug Flags Enabled:
  arp error enabled.
  bcast error enabled.

Related Commands

debug mac

show dhcp

To display internal Dynamic Host Configuration Protocol (DHCP) server configuration, use the show dhcp command.

show dhcp {detailed | leases | opt-82 | proxy | stats |summary | timeout |scope}

Syntax Description

show

Displaysettings.

dhcp

Dynamic Host Configuration Protocol settings.

detailed

Enter detailed to display DHCP information for a particular scope. DHCP sope name allows space by using double quote like "scope 003".

leases

Enter leases to display allocated DHCP leases.

proxy

Enter proxy to display the status if DHCP proxy.

stats

Enter stats to display the DHCP proxy statistics.

summary

Enter summary to display DHCP summary information.

timeout

Enter timeout to display the DHCP timeout information.

scope

Enter the name of a scope to display the DHCP information for that scope.


Examples

> show dhcp leases
 
   
No leases allocated.
 
   
> show dhcp summary
 
   
Scope Name           Enabled           Address Range
003                    No            0.0.0.0 -> 0.0.0.0
 
   
> show dhcp 003
 
   
Enabled....................................... No
Lease Time.................................... 0
Pool Start.................................... 0.0.0.0
Pool End...................................... 0.0.0.0
Network....................................... 0.0.0.0
Netmask....................................... 0.0.0.0
Default Routers............................... 0.0.0.0 0.0.0.0 0.0.0.0
DNS Domain.................................... 
DNS........................................... 0.0.0.0 0.0.0.0 0.0.0.0
Netbios Name Servers.......................... 0.0.0.0 0.0.0.0 0.0.0.0
 
   
 
   
> show dhcp detailed "scope 003"
Enabled.......................................... No
Lease Time....................................... 86400 (1 day )
Pool Start....................................... 0.0.0.0
Pool End......................................... 0.0.0.0
Network.......................................... 0.0.0.0
Netmask.......................................... 0.0.0.0
Default Routers.................................. 0.0.0.0  0.0.0.0  0.0.0.0
DNS Domain.......................................
DNS.............................................. 0.0.0.0  0.0.0.0  0.0.0.0
Netbios Name Servers............................. 0.0.0.0  0.0.0.0  0.0.0.0
 
   

Related Commands

config dhcp
config dhcp proxy
config interface dhcp
config wlan dhcp_server
debug dhcp
debug dhcp service-port
debug disable-all
show dhcp proxy

show dtls connections

Use the show dtls connections command to display the Datagram Transport Layer Security (DTLS) server status.

show dtls connections

Syntax Description

show

Displaysettings.

dtls connections

DTLS server status.


Examples

> show dtls connections
 
   
AP Name         Local Port    Peer IP         Peer Port     Ciphersuite
--------------- ------------- --------------- ------------- -----------------------
1130            Capwap_Ctrl   1.100.163.210   23678         TLS_RSA _WITH_AES_128_CBC_SHA
1130            Capwap_Data   1.100.163.210   23678         TLS_RSA _WITH_AES_128_CBC_SHA
1240            Capwap_Ctrl   1.100.163.209   59674         TLS_RSA _WITH_AES_128_CBC_SHA

Related Commands

config ap link-encryption

show dhcp proxy

Use the show dhcp proxy command to display the status of DHCP proxy handling.

show dhcp proxy

Syntax Description

show

Displaysettings.

dhcp

Dynamic Host Configuration Protocol settings.

proxy

Displays the status of DHCP proxy handling.


Examples

> show dhcp proxy 

DHCP Proxy Behaviour: enabled

Related Commands

config dhcp
config dhcp proxy
config interface dhcp
config wlan dhcp_server
debug dhcp
debug dhcp service-port
debug disable-all
show dhcp

show eventlog

To display the event log, use the show eventlog command.

show eventlog

Syntax Description

show

Display settings.

eventlog

System events.


Examples

> show eventlog
                                             Time
       File     Line TaskID   Code        d  h  m  s
EVENT> bootos.c  788 125CEBCC AAAAAAAA    0  0  0  6
EVENT> bootos.c  788 125CEBCC AAAAAAAA    0  0  0  6
EVENT> bootos.c  788 125C597C AAAAAAAA    0  0  0  6
EVENT> bootos.c  788 125C597C AAAAAAAA    0  0  0  6
EVENT> bootos.c  788 125C597C AAAAAAAA    0  0  0  6
EVENT> bootos.c  788 125C597C AAAAAAAA    0  0  0  6
EVENT> bootos.c  788 125C597C AAAAAAAA    0  0  0  6
EVENT> bootos.c  788 125C597C AAAAAAAA    0  0  0  6
EVENT> bootos.c  788 1216C36C AAAAAAAA    0  0  0  6
EVENT> bootos.c  788 1216C36C AAAAAAAA    0  0  0  6
EVENT> bootos.c  788 1216C36C AAAAAAAA    0  0  0  6
EVENT> bootos.c  788 1216C36C AAAAAAAA    0  0  0 11

Related Commands

show msglog

show exclusionlist

To display a summary of all clients on the manual exclusion list (blacklisted) from associating with this Cisco Wireless LAN controller, use the show exclusionlist command.

show exclusionlist

Syntax Description

show

Display settings.

exclusionist

Manual exclusion list.


Usage Guidelines

This command displays all manually excluded MAC addresses.

Examples

> show exclusionlist
 
   
MAC Address              Description
-----------------------  --------------------------------
xx:xx:xx:xx:xx:xx        Disallowed Client

Related Commands

config exclusionlist add
config exclusionlist delete
config exclusionlist description
show client

show guest-lan

To display the configuration of a specific wired guest LAN, use the show guest-lan command.

show guest-lan guest_lan_id

Syntax Description

show

Display settings.

guest-lan

Indicates the active wired guest LAN.

guest_lan_id

ID of selected wired guest LAN.


Usage Guidelines

To view all wired guest LANs configured on the controller, use the show guest-lan summary command.

Examples

> show guest-lan 2
 
   
Guest LAN Identifier........................... 1
Profile Name................................... guestlan
Network Name (SSID)............................ guestlan
Status......................................... Enabled
AAA Policy Override............................ Disabled
Number of Active Clients....................... 1
Exclusionlist Timeout.......................... 60 seconds
Session Timeout................................ Infinity
Interface...................................... wired
Ingress Interface.............................. wired-guest
WLAN ACL....................................... unconfigured
DHCP Server.................................... 10.20.236.90
DHCP Address Assignment Required............... Disabled
Quality of Service............................. Silver (best effort)
Security
	Web Based Authentication................... Enabled
	ACL........................................ Unconfigured
	Web-Passthrough............................ Disabled
	Conditional Web Redirect................... Disabled
	Auto Anchor................................ Disabled
Mobility Anchor List
GLAN ID IP Address Status

Related Commands

show guest-lan summary
show client summary guest-lan

show hreap group detail

To display the details for a specific hybrid-REAP group, use the show hreap group detail command.

show hreap group detail group_name

Syntax Description

show

Display settings.

hreap

Hybrid Remote Edge Access Point settings.

group

Hybrid-REAP group settings.

detail

Hybrid-REAP group configuration details.

group_name

IP address of hybrid-REAP group.


Examples

> show hreap group detail 192.12.1.2
 
   
Number of Ap's in Group: 	1
00:0a:b8:3b:0b:c2 	 AP1200 	 	Joined
 
   
Group Radius Auth Servers:
	Primary Server Index ..................... Disabled
	Secondary Server Index ................... Disabled

Related Commands

config hreap group
show hreap group summary

show hreap group summary

To display the current list of hybrid-REAP groups, use the show hreap group summary command.

show hreap group summary

Syntax Description

show

Display settings.

hreap

Hybrid Remote Edge Access Point settings.

group

Hybrid-REAP group settings.

summary

Displays a summary of the hybrid-REAP group.


Examples

> show hreap group summary
 
   
HREAP Group Summary: 	Count 1
 
   
Group Name	 				 	# APs
Group 1 						1

Related Commands

config hreap group
show hreap group detail

show hreap office-extend

To display hybrid-REAP OfficeExtend access point information, use the show hreap office-extend command.

show hreap office-extend {summary | latency}

Syntax Description

show

Display settings.

hreap

Hybrid Remote Edge Access Point settings.

office-extend

OfficeExtend settings.

summary

Displays a list of all OfficeExtend access points.

latency

Displays the link delay for OfficeExtend access points .


Examples

> show hreap office-extend summary
Summary of OfficeExtend AP
AP Name            Ethernet MAC       Encryption  Join-Mode   Join-Time
------------------ -----------------  ----------  ----------- ----------
AP1130             00:22:90:e3:37:70   Enabled    Latency     Sun Jan 4 21:46:07 2009
AP1140             01:40:91:b5:31:70   Enabled    Latency     Sat Jan 3 19:30:25 2009
 
   
> show hreap office-extend latency
Summary of OfficeExtend AP link latency
AP Name              Status  Current   Maximum   Minimum
--------------------------------------------------------------------------
AP1130               Enabled 15 ms      45 ms     12 ms
AP1140               Enabled 14 ms     179 ms     12 ms

Related Commands

config hreap group
show hreap group detail

show ike

To display active Internet Key Exchange (IKE) security associations (SAs), use the show ike command.

show ike {brief | detailed} IP_or_MAC_address

Syntax Description

show

Display settings.

ike

Display Internet Key Exchange security associations.

brief

Brief summary of all active IKE SAs.

detailed

Detailed summary of all active IKE SAs.

IP_or_MAC_address

IP or MAC address of active IKE SA.


Examples

> show ike brief 10.10.10.10

Related Commands

None.

show interface

Use the show interface command to display details of the system interfaces.

show interface {summary | detailed interface_name}

Syntax Description

show interface

Command action

summary

Displays a summary of the local interfaces.

detailed

Displays detailed interface information.

interface_name

Identifies interface name for detailed display


Examples

> show interface summary
 
   
Interface Name       Port 	Vlan Id    IP Address        Type    Ap Mgr Guest
-------------------  ----   ---------   ----------------  ------ ------ ------
 
   
ap-manager           1 	 	 	 untagged		 	 	 xxx.xxx.xxx.xxx  Static   Yes 	No
management           1 	 	 	 	untagged    xxx.xxx.xxx.xxx  Static   No 	No
service-port         N/A     N/A 	 	 	 	 xxx.xxx.xxx.xxx  Static   No 	 No
virtual              N/A     N/A 	 	 	 	 xxx.xxx.xxx.xxx  Static   No	 	 No

Note The interface name of the wired guest LAN in the following example is management and its VLAN ID is 149.


 
   
> show interface detailed management
 
   
Interface Name................................... management
MAC Address...................................... 00:0b:85:32:ab:60
IP Address....................................... 1.100.49.30
IP Netmask....................................... 255.255.255.0
IP Gateway....................................... 1.100.49.1
VLAN............................................. 149
Active Physical Port............................. 1
Primary Physical Port............................ 1
Backup Physical Port............................. Unconfigured
Primary DHCP Server.............................. 1.100.2.15
Secondary DHCP Server............................ Unconfigured
ACL.............................................. Unconfigured
AP Manager....................................... No

Note Some WLAN controllers may have only one physical port listed because they have only one physical port.


Related Commands

Configure Interface Commands

show invalid-config

To see any ignored commands or invalid configuration values in an edited configuration file, use the show invalid-config command.

show invalid-config

Syntax Description

show

Display settings.

invalid-config

Display any CLI commands in the configuration file with invalid values.


Usage Guidelines


Note You can execute this command only before the clear config or save config command.


Examples

To see a list of any ignored commands or invalid configuration values in a configuration file, enter this command:

> show invalid-config
 
   
config wlan peer-blocking drop 3
config wlan dhcp_server 3 192.168.0.44 required

Related Commands

None.

show inventory

To display a physical inventory of the Cisco Wireless LAN controller, use the show inventory command.

show inventory

Syntax Description

show

Display settings.

inventory

Physical Cisco Wireless LAN controller configuration.


Usage Guidelines

Some wireless LAN controllers may have no crypto accelerator (VPN termination module) or power supplies listed because they have no provisions for VPN termination modules or power supplies.

Examples

> show inventory
 
   
Switch Description............................... Cisco Controller
Machine Model.................................... WLC4404-100
Serial Number.................................... FLS0923003B
Burned-in MAC Address............................ 00:0B:85:32:AB:60
Crypto Accelerator 1............................. Absent
Crypto Accelerator 2............................. Absent
Power Supply 1................................... Absent
Power Supply 2................................... Present, OK

Related Commands

show ap inventory

show ipsec

To display active Internet Protocol Security (IPSec) security associations (SAs), use the show ipsec commands.

show ipsec {brief | detailed} IP_or_MAC_address

Syntax Description

show

Display settings.

ipsec

Internet Protocol Security security associations.

brief

Brief sumamry of active IPSec SAs.

detailed

Detailed summary of active IPSec SAs.

IP_or_MAC_address

Enter the IP address or MAC address of a device to see its IPSec SAs.


Examples

> show ipsec brief 10.10.10.10

Related Commands

config radius acct ipsec authentication
config radius acct ipsec disable
config radius acct ipsec enable
config radius acct ipsec encryption
config radius acct ipsec ike
config radius auth ipsec authentication
config radius auth ipsec disable
config radius auth ipsec encryption
config radius auth ipsec ike
config trapflags ipsec
config wlan security ipsec disable
config wlan security ipsec enable
config wlan security ipsec authentication
config wlan security ipsec encryption
config wlan security ipsec config
config wlan security ipsec ike authentication
config wlan security ipsec ike dh-group
config wlan security ipsec ike lifetime
config wlan security ipsec ike phase1
config wlan security ipsec ike contivity

show known ap

To display known Cisco lightweight access point information, use the show known ap command.

show known ap {summary | detailed MAC}

Syntax Description

show

Display settings.

known ap

Known Cisco lightweight access point information.

summary

Displays a list of all known access points.

detailed

Provides detailed information for all known access points.

MAC

MAC address of the known AP


Examples

> show known ap summary
 
   
MAC Address         State        # APs  # Clients   Last Heard
-----------         -----------  -----   --------   -----------------

Related Commands

config ap

show l2tp

To display Layer 2 Tunneling Protocol (L2TP) sessions, use the show l2tp command.

show l2tp {summary | ip_address}

Syntax Description

show l2tp

Display settings.

summary

Displays all L2TP sessions.

ip_address

Displays an L2TP session.


Examples

> show l2tp summary
 
   
LAC_IPaddr LTid LSid RTid RSid ATid ASid State
---------- ---- ---- ---- ---- ---- ---- -----

Related Commands

None.

show lag summary

To display the current LAG status, use the show lag summary command.

show lag summary

Syntax Description

This command has no arguments or keywords.

Examples

> show lag summary
 
   
LAG Enabled
 
   

Related Commands

config lag

show ldap

To display the Lightweight Directory Access Protocol (LDAP) server information for a particular LDAP server, use the show ldap command.

show ldap index

Syntax Description

show

Display settings.

ldap

Lightweight Directory Access Protocol server settings.

index

LDAP server index. Valid values are from 1 to 17.


Defaults

None.

Examples

> show ldap 1
Server Index..................................... 1
Address.......................................... 2.3.1.4
Port............................................. 389
Enabled.......................................... Yes
User DN.......................................... name1
User Attribute................................... attr1
User Type........................................ username1
Retransmit Timeout............................... 3 seconds
Bind Method ..................................... Anonymous
 
   

Related Commands

config ldap
config ldap add
config ldap simple-bind
show ldap statistics
show ldap summary

show ldap statistics

To display all Lightweight Directory Access Protocol (LDAP) server information, use the show ldap statistics command.

show ldap statistics

Syntax Description

show

Display settings.

ldap

Lightweight Directory Access Protocol server settings.

statistics

Display detailed LDAP server settings.


Examples

> show ldap statistics
 
   
Server Index..................................... 1
Server statistics:
  Initialized OK................................. 0
  Initialization failed.......................... 0
  Initialization retries......................... 0
  Closed OK...................................... 0
Request statistics:
  Received....................................... 0
  Sent........................................... 0
  OK............................................. 0
  Success........................................ 0
  Authentication failed.......................... 0
  Server not found............................... 0
  No received attributes......................... 0
  No passed username............................. 0
  Not connected to server........................ 0
  Internal error................................. 0
  Retries........................................ 0
 
   
Server Index..................................... 2
...

Related Commands

config ldap
config ldap add
config ldap simple-bind
show ldap
show ldap summary

show ldap summary

To display the current Lightweight Directory Access Protocol (LDAP) server status, use the show ldap summary command.

show ldap summary

Syntax Description

show

Display settings.

ldap

Lightweight Directory Access Protocol server settings.

summary

Display detailed LDAP server settings.


Examples

> show ldap summary
 
   

Idx Server Address Port Enabled

--- --------------- ---- -------

1 2.3.1.4 389 Yes

2 10.10.20.22 389 Yes

Related Commands

config ldap
config ldap add
config ldap simple-bind
show ldap
show ldap statistics

show license agent

To display the license agent counter and session information on the Cisco 5500 series controller, use the show license agent command.

show license agent {counters | sessions}

Syntax Description

show

Display settings.

license

License settings.

agent {counters | sessions}

Display license agent counter and session information.


Defaults

None.

Examples

>show license agent counters
 
   
License Agent Counters
Request Messages Received:0: Messages with Errors:0
Request Operations Received:0: Operations with Errors:0
Notification Messages Sent:0: Transmission Errors:0: Soap Errors:0
 
   
>show license agent sessions
 
   
License Agent Sessions: 0 open, maximum is 9

Related Commands

config license agent
clear license agent
show license all
show license detail
show license feature
show license image-level
show license summary

show license all

To display information for all licenses on the Cisco 5500 series controller, use the show license all command.

show license all

Syntax Description

show

Display settings.

license

License settings.

all

Display all the licenses.


Defaults

None.

Examples

>show license all
License Store: Primary License Storage
StoreIndex:  0  Feature: wplus-ap-count   Version: 1.0
        License Type: Permanent
        License State: Inactive
        License Count: 12/0/0
        License Priority: Medium
StoreIndex:  1  Feature: base   Version: 1.0
        License Type: Permanent
        License State: Active, Not in Use
        License Count: Non-Counted
        License Priority: Medium
StoreIndex:  2  Feature: wplus   Version: 1.0
        License Type: Permanent
        License State: Active, In Use
        License Count: Non-Counted
        License Priority: Medium
License Store: Evaluation License Storage
StoreIndex:  0  Feature: wplus   Version: 1.0
        License Type: Evaluation
        License State: Inactive
            Evaluation total period:  8 weeks  4 days
            Evaluation period left:  6 weeks  6 days
        License Count: Non-Counted
        License Priority: Low
StoreIndex:  1  Feature: wplus-ap-count   Version: 1.0
        License Type: Evaluation
        License State: Active, In Use
            Evaluation total period:  8 weeks  4 days
            Evaluation period left:  2 weeks  3 days
            Expiry date: Thu Jun 25 18:09:43 2009
        License Count: 250/250/0
        License Priority: High
StoreIndex:  2  Feature: base   Version: 1.0
        License Type: Evaluation
        License State: Inactive
            Evaluation total period:  8 weeks  4 days
            Evaluation period left:  8 weeks  4 days
        License Count: Non-Counted
        License Priority: Low
StoreIndex:  3  Feature: base-ap-count   Version: 1.0
        License Type: Evaluation
        License State: Active, Not in Use, EULA accepted
            Evaluation total period:  8 weeks  4 days
            Evaluation period left:  8 weeks  3 days
        License Count: 250/0/0
        License Priority: Low

Related Commands

license install
license modify priority
show license agent
show license detail
show license feature
show license image-level
show license summary

show license capacity

To displaythe maximum number of access points allowed for this license on the Cisco 5500 series controller, the number of access points currently joined to the controller, and the number of access points that can still join the controller, use the show license capacity command.

show license capacity

Syntax Description

show

Display settings.

license

License settings.

capacity

Display license currently used by the access point.


Defaults

None.

Examples

>show license capacity
 
   
Licensed Feature    Max Count         Current Count     Remaining Count
-----------------------------------------------------------------------
AP Count            250               47                203

Related Commands

license install
license modify priority
show license agent
show license all
show license detail
show license feature
show license image-level
show license summary

show license detail

To display details of a specific license on the Cisco 5500 series controller, use the show license detail command.

show license detail license_name

Syntax Description

show

Display settings.

license

License settings.

detail license_name

Display details of a specific license.


Defaults

None.

Examples

>show license detail wplus
Feature: wplus           Period left: Life time
Index:  1       Feature: wplus   Version: 1.0
        License Type: Permanent
        License State: Active, In Use
        License Count: Non-Counted
        License Priority: Medium
        Store Index: 2
        Store Name: Primary License Storage
Index:  2       Feature: wplus   Version: 1.0
        License Type: Evaluation
        License State: Inactive
            Evaluation total period:  8 weeks  4 days
            Evaluation period left:  6 weeks  6 days
        License Count: Non-Counted
        License Priority: Low
        Store Index: 0

Related Commands

license install
license modify priority
show license agent
show license all
show license feature
show license image-level
show license summary

show license expiring

To display details of expiring licenses on the Cisco 5500 series controller, use the show license expiring command.

show license expiring

Syntax Description

show

Display settings.

license

License settings.

expiring

Display expiring licenses.


Defaults

None.

Examples

>show license expiring
StoreIndex:  0  Feature: wplus   Version: 1.0
        License Type: Evaluation
        License State: Inactive
            Evaluation total period:  8 weeks  4 days
            Evaluation period left:  6 weeks  6 days
        License Count: Non-Counted
        License Priority: Low
StoreIndex:  1  Feature: wplus-ap-count   Version: 1.0
        License Type: Evaluation
        License State: Active, In Use
            Evaluation total period:  8 weeks  4 days
            Evaluation period left:  2 weeks  3 days
            Expiry date: Thu Jun 25 18:09:43 2009
        License Count: 250/250/0
        License Priority: High
StoreIndex:  2  Feature: base   Version: 1.0
        License Type: Evaluation
        License State: Inactive
            Evaluation total period:  8 weeks  4 days
            Evaluation period left:  8 weeks  4 days
        License Count: Non-Counted
        License Priority: Low
StoreIndex:  3  Feature: base-ap-count   Version: 1.0
        License Type: Evaluation
        License State: Active, Not in Use, EULA accepted
            Evaluation total period:  8 weeks  4 days
            Evaluation period left:  8 weeks  3 days
        License Count: 250/0/0
        License Priority: Low

Related Commands

license install
license modify priority
show license all
show license detail
show license evaluation
show license in-use
show license summary

show license evaluation

To display details of evaluation licenses on the Cisco 5500 series controller, use the show license evaluation command.

show license evaluation

Syntax Description

show

Display settings.

license

License settings.

evaluation

Display evaluation licenses.


Defaults

None.

Examples

>show license evaluation
StoreIndex:  0  Feature: wplus   Version: 1.0
        License Type: Evaluation
        License State: Inactive
            Evaluation total period:  8 weeks  4 days
            Evaluation period left:  6 weeks  6 days
        License Count: Non-Counted
        License Priority: Low
StoreIndex:  1  Feature: wplus-ap-count   Version: 1.0
        License Type: Evaluation
        License State: Active, In Use
            Evaluation total period:  8 weeks  4 days
            Evaluation period left:  2 weeks  3 days
            Expiry date: Thu Jun 25 18:09:43 2009
        License Count: 250/250/0
        License Priority: High
StoreIndex:  2  Feature: base   Version: 1.0
        License Type: Evaluation
        License State: Inactive
            Evaluation total period:  8 weeks  4 days
            Evaluation period left:  8 weeks  4 days
        License Count: Non-Counted
        License Priority: Low
StoreIndex:  3  Feature: base-ap-count   Version: 1.0
        License Type: Evaluation
        License State: Active, Not in Use, EULA accepted
            Evaluation total period:  8 weeks  4 days
            Evaluation period left:  8 weeks  3 days
        License Count: 250/0/0
        License Priority: Low

Related Commands

license install
license modify priority
show license all
show license detail
show license expiring
show license in-use
show license summary

show license feature

To display a summary of license-enabled features on the Cisco 5500 series controller, use the show license feature command.

show license feature

Syntax Description

show

Display settings.

license

License settings.

feature

Display license enabled features.


Defaults

None.

Examples

>show license feature
        Feature name Enforcement  Evaluation  Clear Allowed  Enabled
               wplus         yes         yes            yes      yes
      wplus-ap-count         yes         yes            yes      yes
                base          no         yes            yes       no
       base-ap-count         yes         yes            yes       no

Related Commands

license install
license modify priority
show license all
show license detail
show license expiring
show license evaluation
show license image-level
show license in-use
show license summary

show license file

To display a summary of license-enabled features on the Cisco 5500 series controller, use the show license feature command.

show license file

Syntax Description

show

Display settings.

license

License settings.

file

Display all the license files.


Defaults

None.

Examples

>show license file
License Store: Primary License Storage
  Store Index: 0
    License: 11 wplus-ap-count 1.0 LONG NORMAL STANDALONE EXCL 12_KEYS INFINIT
             E_KEYS NEVER NEVER NiL SLM_CODE CL_ND_LCK NiL *1AR5NS7M5AD8PPU400
              NiL NiL NiL 5_MINS <UDI><PID>AIR-CT5508-K9</PID><SN>RFD000P2D27<
             /SN></UDI> Pe0L7tv8KDUqo:zlPe423S5wasgM8G,tTs0i,7zLyA3VfxhnIe5aJa
             m63lR5l8JM3DPkr4O2DI43iLlKn7jomo3RFl1LjMRqLkKhiLJ2tOyuftQSq2bCAO6
             nR3wIb38xKi3t$<WLC>AQEBIQAB//++mCzRUbOhw28vz0czAY0iAm7ocDLUMb9ER0
             +BD3w2PhNEYwsBN/T3xXBqJqfC+oKRqwInXo3s+nsLU7rOtdOxoIxYZAo3LYmUJ+M
             FzsqlhKoJVlPyEvQ8H21MNUjVbhoN0gyIWsyiJaM8AQIkVBQFzhr10GYolVzdzfJf
             EPQIx6tZ++/Vtc/q3SF/5Ko8XCY=</WLC>
    Comment:
       Hash: iOGjuLlXgLhcTB113ohIzxVioHA=
 
   
. . .

Related Commands

license install

show license all
show license detail
show license expiring
show license feature
show license image-level
show license in-use
show license summary

show license handle

To display the license handles on the Cisco 5500 series controller, use the show license handle command.

show license handle

Syntax Description

show

Display settings.

license

License settings.

handle

Display license handles.


Defaults

None.

Examples

>show license handle
 
   
Feature: wplus                           , Handle Count: 1
    Units: 01( 0), ID: 0x5e000001, NotifyPC: 0x1001e8f4 LS-Handle (0x00000001),
Units: ( 1)
 
   
    Registered clients: 1
        Context 0x1051b610, epID 0x10029378
Feature: base                            , Handle Count: 0
    Registered clients: 1
        Context 0x1053ace0, epID 0x10029378
Feature: wplus-ap-count                  , Handle Count: 1
    Units: 250( 0), ID: 0xd4000002, NotifyPC: 0x1001e8f4        LS-Handle (0x000
00002), Units: (250)
 
   
    Registered clients: None
Feature: base-ap-count                   , Handle Count: 0
    Registered clients: None
Global Registered clients: 2
                Context 0x10546270, epID 0x100294cc
                Context 0x1053bae8, epID 0x100294cc

Related Commands

license install
show license all
show license detail
show license expiring
show license feature
show license image-level
show license in-use
show license summary

show license image-level

To display the license image level that is in use on the Cisco 5500 series controller, use the show license image-level command.

show license image-level

Syntax Description

show

Display settings.

license

License settings.

image-level

Display the image level.


Defaults

None.

Examples

>show license image-level
Module name  Image level  Priority  Configured  Valid license
wnbu         wplus        1         YES         wplus
             base         2         NO
 
   
 NOTE: wplus includes two additional features: Office Extend AP, Mesh AP.

Related Commands

license install
license modify priority
show license all
show license detail
show license expiring
show license feature
show license in-use
show license summary

show license in-use

To display the licenses that are in use on the Cisco 5500 series controller, use the show license in-use command.

show license in-use

Syntax Description

show

Display settings.

license

License settings.

in-use

Display license that are in-use.


Defaults

None.

Examples

>show license in-use
StoreIndex:  2  Feature: wplus   Version: 1.0
        License Type: Permanent
        License State: Active, In Use
        License Count: Non-Counted
        License Priority: Medium
StoreIndex:  1  Feature: wplus-ap-count   Version: 1.0
        License Type: Evaluation
        License State: Active, In Use
            Evaluation total period:  8 weeks  4 days
            Evaluation period left:  2 weeks  3 days
            Expiry date: Thu Jun 25 18:09:43 2009
        License Count: 250/250/0
        License Priority: High

Related Commands

license install
license modify priority
show license all
show license detail
show license evaluation
show license expiring
show license feature
show license image-level
show license permanent
show license summary

show license permanent

To display the permanent licenses on the Cisco 5500 series controller, use the show license permanent command.

show license permanent

Syntax Description

show

Display settings.

license

License settings.

permanent

Display permanent licenses.


Defaults

None.

Examples

>show license permanent
StoreIndex:  0  Feature: wplus-ap-count   Version: 1.0
        License Type: Permanent
        License State: Inactive
        License Count: 12/0/0
        License Priority: Medium
StoreIndex:  1  Feature: base   Version: 1.0
        License Type: Permanent
        License State: Active, Not in Use
        License Count: Non-Counted
        License Priority: Medium
StoreIndex:  2  Feature: wplus   Version: 1.0
        License Type: Permanent
        License State: Active, In Use
        License Count: Non-Counted
        License Priority: Medium

Related Commands

license install
license modify priority
show license all
show license detail
show license evaluation
show license expiring
show license feature
show license image-level
show license in-use
show license summary

show license status

To display license status on the Cisco 5500 series controller, use the show license status command.

show license status

Syntax Description

show

Display settings.

license

License settings.

status

Display license status.


Defaults

None.

Examples

>show license status
                License Type Supported
        permanent  Non-expiring node locked license
        extension  Expiring node locked license
        evaluation Expiring non node locked license
 
   
                License Operation Supported
        install    Install license
        clear      Clear license
        annotate   Comment license
        save       Save license
        revoke     Revoke license
 
   
                Device status
        Device Credential type: DEVICE
        Device Credential Verification: PASS
        Rehost Type: DC_OR_IC

Related Commands

license install
license modify priority
show license all
show license detail
show license evaluation
show license expiring
show license feature
show license image-level
show license permanent
show license summary

show license statistics

To display license statistics on the Cisco 5500 series controller, use the show license statistics command.

show license statistics

Syntax Description

show

Display settings.

license

License settings.

statistics

Display license statistics.


Defaults

None.

Examples

>show license statistics
                Administrative statistics
        Install success count:       0
        Install failure count:       0
        Install duplicate count:     0
        Comment add count:           0
        Comment delete count:        0
        Clear count:                 0
        Save count:                  0
        Save cred count:             0
 
   
                Client status
        Request success count     2
        Request failure count     0
        Release count             0
        Global Notify count       0

Related Commands

license install
license modify priority
show license all
show license detail
show license evaluation
show license expiring
show license feature
show license image-level
show license permanent
show license summary

show license summary

To display a brief summary of all licenses on the Cisco 5500 series controller, use the show license summary command.

show license summary

Syntax Description

show

Display settings.

license

License settings.

summary

Display brief summary of all licenses.


Defaults

None.

Examples

>show license summary
Index 1 Feature: wplus
        Period left: Life time
        License Type: Permanent
        License State: Active, In Use
        License Count: Non-Counted
        License Priority: Medium
Index 2 Feature: wplus-ap-count
        Period left:  2 weeks  3 days
        License Type: Evaluation
        License State: Active, In Use
        License Count: 250/250/0
        License Priority: High
Index 3 Feature: base
        Period left: Life time
        License Type: Permanent
        License State: Active, Not in Use
        License Count: Non-Counted
        License Priority: Medium
Index 4 Feature: base-ap-count
        Period left:  8 weeks  3 days
        License Type: Evaluation
        License State: Active, Not in Use, EULA accepted
        License Count: 250/0/0
        License Priority: Low

Related Commands

license install
license modify priority
show license all
show license detail
show license evaluation
show license expiring
show license feature
show license image-level
show license permanent
show license summary

show license udi

To display unique device identifier (UDI) values for licenses on the Cisco 5500 series controller, use the show license udi command.

show license udi

Syntax Description

show

Display settings.

license

License settings.

udi

Display UDI values for licenses.


Defaults

None.

Examples

>show license udi
Device# PID                     SN                      UDI
-------------------------------------------------------------------------------------
*0      AIR-CT5508-K9           RFD000P2D27             AIR-CT5508-K9:RFD000P2D27

Related Commands

license install
license modify priority
show license all
show license detail
show license evaluation
show license expiring
show license feature
show license image-level
show license permanent
show license summary

show load-balancing

To display the status of the load-balancing feature, use the show load-balancing command.

show load-balancing

Syntax Description

show

Display settings.

load-balancing

Displays the load-balancing status.


Defaults

None.

Examples

> show load-balancing
 
   
Aggressive Load Balancing........................ Enabled
Aggressive Load Balancing Window................. 0 clients
Aggressive Load Balancing Denial Count........... 3
Statistics
Total Denied Count............................... 10 clients
Total Denial Sent................................ 20 messages
Exceeded Denial Max Limit Count.................. 0 times
None 5G Candidate Count.......................... 0 times
None 2.4G Candidate Count..................... 0 times

Related Commands

config load-balancing

show local-auth certificates

This command is used to display local authentication certificate information:

show local-auth certificates

Syntax Description

show

Display settings.

local-auth

Authentication certificate information stored locally.

certificates

Display certificate information.


Examples

> show local-auth certificates 

Certificates available for Local EAP authentication: 
 
Certificate issuer .............................. vendor
CA certificate:
Subject: C=AU, ST=NSW, L=Sydney, O=Cisco Systems 
OU=WNBU Sydney, CN=wnbu-syd-acs-a.cisco.com 
Issuer: C=AU, ST=NSW, L=Sydney, O=Cisco Systems 
OU=WNBU Sydney, CN=wnbu-syd-acs-a.cisco.com 
Valid: 2005 Jun 15th, 04:53:49 GMT to 2008 Jun 15th, 05:03:34 GMT 
Device certificate: 
Subject: MAILTO=test@test.net, C=AU, ST=NSW, L=Sydney 
O=Cisco Systems, OU=WNBU Sydney, CN=concannon 
Issuer: C=AU, ST=NSW, L=Sydney, O=Cisco Systems 
OU=WNBU Sydney, CN=wnbu-syd-acs-a.cisco.com 
Valid: 2006 Aug 9th, 05:14:16 GMT to 2007 Aug 9th, 05:24:16 GMT
 
   
Certificate issuer .............................. cisco
CA certificate:
Subject: C=US, ST=California, L=San Jose, O=airespace Inc 
OU=none, CN=ca, MAILTO=support@airespace.com 
Issuer: C=US, ST=California, L=San Jose, O=airespace Inc 
OU=none, CN=ca, MAILTO=support@airespace.com 
Valid: 2003 Feb 12th, 23:38:55 GMT to 2012 Nov 11th, 23:38:55 GMT 
Device certificate: 
Subject: C=US, ST=California, L=San Jose, O=airespace Inc 
CN=000b85335340, MAILTO=support@airespace.com 
Issuer: C=US, ST=California, L=San Jose, O=airespace Inc 
OU=none, CN=ca, MAILTO=support@airespace.com 
Valid: 2005 Feb 22nd, 10:52:58 GMT to 2014 Nov 22nd, 10:52:58 GMT
 
   
Certificate issuer .............................. legacy
CA certificate:
Subject: C=US, ST=California, L=San Jose, O=airespace Inc 
OU=none, CN=ca, MAILTO=support@airespace.com 
Issuer: C=US, ST=California, L=San Jose, O=airespace Inc 
OU=none, CN=ca, MAILTO=support@airespace.com 
Valid: 2003 Feb 12th, 23:38:55 GMT to 2012 Nov 11th, 23:38:55 GMT 
 
Device certificate: 
Subject: C=US, ST=California, L=San Jose, O=airespace Inc 
CN=000b85335340, MAILTO=support@airespace.com 
Issuer: C=US, ST=California, L=San Jose, O=airespace Inc 
OU=none, CN=ca, MAILTO=support@airespace.com 
Valid: 2005 Feb 22nd, 10:52:58 GMT to 2014 Nov 22nd, 10:52:58 GMT

Related Commands

clear stats local-auth
config local-auth active-timeout
config local-auth eap-profile
config local-auth method fast
config local-auth user-credentials
debug aaa local-auth
show local-auth config
show local-auth statistics

show local-auth config

To display local authentication configuration information, use the show local-auth config command.

show local-auth config

Syntax Description

show

Display settings.

local-auth

Authentication certificate information stored locally.

config

Display local authentication configuration information.


Examples

> show local-auth config
 
   
User credentials database search order:
Primary ................................... Local DB
 
   
Configured EAP profiles:
Name ...................................... fast-test
Certificate issuer .................... default
Enabled methods ....................... fast
Configured on WLANs ................... 2
 
   
EAP Method configuration:
EAP-TLS:
Certificate issuer .................... default
Peer verification options:
	Check against CA certificates ..... Enabled
	Verify certificate CN identity .... Disabled
	Check certificate date validity ... Enabled
EAP-FAST:
TTL for the PAC ....................... 3 600
Initial client message ................ <none>
Local certificate required ............ No
Client certificate required ........... No
Vendor certificate required ........... No
Anonymous provision allowed ........... Yes
Authenticator ID ...................... 7b7fffffff0000000000000000000000
Authority Information ................. Test
 
   
EAP Profile.................................... tls-prof
Enabled methods for this profile .......... tls
Active on WLANs ........................... 1 3
EAP Method configuration:
EAP-TLS:
Certificate issuer used ............... cisco
Peer verification options:
	Check against CA certificates ..... disabled
	Verify certificate CN identity .... disabled
	Check certificate date validity ... disabled

Related Commands

clear stats local-auth
config local-auth active-timeout
config local-auth eap-profile
config local-auth method fast
config local-auth user-credentials
debug aaa local-auth
show local-auth certificates
show local-auth statistics

show local-auth statistics

This command is used to display local EAP authentication statistics:

show local-auth statistics

Syntax Description

show

Display settings.

local-auth

Authentication certificate information stored locally.

statistics

Display local authentication certificate statistics.


Defaults

None.

Examples

> show local-auth statistics
 
   
Local EAP authentication DB statistics:
Requests received ............................... 14
Responses returned .............................. 14
Requests dropped (no EAP AVP) ................... 0
Requests dropped (other reasons) ................ 0
Authentication timeouts ......................... 0
 
   
Authentication statistics:
  Method          Success         Fail
  ------------------------------------
  Unknown               0            0
  LEAP                  0            0
  EAP-FAST              2				 	 	 	 	 	 0
  EAP-TLS               0            0
  PEAP                  0            0
 
   
Local EAP credential request statistics:
Requests sent to LDAP DB ........................ 0
Requests sent to File DB ........................ 2
Requests failed (unable to send) ................ 0
Authentication results received:
  Success ....................................... 2
  Fail .......................................... 0
Certificate operations:
Local device certificate load failures .......... 0
Total peer certificates checked ................. 0
Failures:
  CA issuer check ............................... 0
  CN name not equal to identity ................. 0
  Dates not valid or expired .................... 0

Related Commands

clear stats local-auth
config local-auth active-timeout
config local-auth eap-profile
config local-auth method fast
config local-auth user-credentials
debug aaa local-auth
show local-auth certificates
show local-auth config

show location

To display location system information, use the show location command.

show location [detail mac_address | summary]

Syntax Description

show

Display settings.

location

Display location system settings.

detail

Displays detailed location information

mac_address

Specifies the MAC address of a client.

summary

Displays summary location information.


Examples

> show location summary
 Location Summary
 
   
 Algorithm used:                 Average
 Client
        RSSI expiry timeout:     5 sec
        Half life:               0 sec
        Notify Threshold:        0 db
 Calibrating Client
        RSSI expiry timeout:     5 sec
        Half life:               0 sec
 Rogue AP
        RSSI expiry timeout:     5 sec
        Half life:               0 sec
        Notify Threshold:        0 db
 RFID Tag
        RSSI expiry timeout:     5 sec
        Half life:               0 sec
        Notify Threshold:        0 db

Related Commands

clear location rfid
clear location statistics rfid
config location
show location statistics rfid

show location statistics rfid

To see any radio frequency identification (RFID)-related errors, use the show location statistics rfid command.

show location statistics rfid

Syntax Description

show

Display settings.

location

Display location settings.

statistics

Displays detailed location information.

rfid

Display detailed location RFID statistics.


Examples

> show location statistics rfid
 
   
RFID Statistics
 
Database Full :         0        Failed Delete:         0
Null Bufhandle:         0        Bad Packet:            0
Bad LWAPP Data:         0        Bad LWAPP Encap:       0
Off Channel:            0        Bad CCX Version:       0
Bad AP Info :           0 
Above Max RSSI:         0        Below Max RSSI:        0
Invalid RSSI:           0        Add RSSI Failed:       0
Oldest Expired RSSI:    0        Smallest Overwrite:    0

Related Commands

clear location rfid
clear location statistics rfid
config location
show location

show logging

To display the syslog facility logging parameters and buffer contents, use the show logging command.

show logging

Syntax Description

show

Display settings.

logging

Current settings and buffer content details.


Examples

> show logging
 
   
Logging to buffer :
- Logging of system messages to buffer :
 - Logging filter level.......................... errors
 - Number of system messages logged.............. 67227
 - Number of system messages dropped............. 21136
- Logging of debug messages to buffer ........... Disabled
 - Number of debug messages logged............... 0
 - Number of debug messages dropped.............. 0
Logging to console :
- Logging of system messages to console :
 - Logging filter level.......................... errors
 - Number of system messages logged.............. 0
 - Number of system messages dropped............. 88363
- Logging of debug messages to console .......... Enabled
 - Number of debug messages logged............... 0
 - Number of debug messages dropped.............. 0
Logging to syslog :
- Syslog facility................................ local0
- Logging of system messages to syslog :
 - Logging filter level.......................... errors
 - Number of system messages logged.............. 67227
--More-- or (q)uit
 - Number of system messages dropped............. 21136
- Logging of debug messages to syslog ........... Disabled
 - Number of debug messages logged............... 0
 - Number of debug messages dropped.............. 0
- Number of remote syslog hosts.................. 0
  - Host 0....................................... Not Configured
  - Host 1....................................... Not Configured
  - Host 2....................................... Not Configured
Logging of traceback............................. Disabled
Logging of process information................... Disabled
Logging of source file informational............. Enabled
Timestamping of messages.........................
- Timestamping of system messages................ Enabled
 - Timestamp format.............................. Date and Time
- Timestamping of debug messages................. Enabled
 - Timestamp format.............................. Date and Time
 
   
 Logging buffer (67227 logged, 21136 dropped)
 
   
*Apr 03 09:48:01.728: %MM-3-INVALID_PKT_RECVD: mm_listen.c:5508 Received an invalid
packet from 1.100.163.51. Source member:0.0.0.0. source member unknown.
*Apr 03 09:47:34.194: %LWAPP-3-DECODE_ERR: spam_lrad.c:1271 Error decoding discovery
request from AP 00:13:5f:0e:d4:20
*Apr 03 09:47:34.194: %LWAPP-3-DISC_OTAP_ERR: spam_lrad.c:5554 Ignoring OTAP discovery 
request from AP 00:13:5f:0e:d4:20, OTAP is disabled
Previous message occurred 2 times.
 
   

Related Commands

config logging syslog host
config logging syslog facility
config logging syslog level

show loginsession

To display the existing sessions, use the show loginsession command.

show loginsession

Syntax Description

show

Display settings.

loginsession

Current session details.


Examples

> show loginsession
 
   
ID    User Name     Connection From   Idle Time    Session Time
-- ---------------  ---------------  ------------  ------------
00 admin            EIA-232          00:00:00      00:19:04

Related Commands

config loginsession close

show macfilter

To display the MAC filter parameters, use the show macfilter command. The MAC delimiter (none, colon, or hyphen) for MAC addresses sent to RADIUS servers is displayed. The MAC filter table lists the clients that are always allowed to associate with a wireless LAN.

show macfilter {summary | detail MAC}

Syntax Description

show

Display settings.

macfilter

Filter details.

summary

Displays a summary of all MAC filter entries.

detail MAC

Detailed display of a MAC filter entry.


Examples

> show macfilter detail xx:xx:xx:xx:xx:xx
 
   
MAC Address...................................... xx:xx:xx:xx:xx:xx
WLAN Identifier.................................. Any
Interface Name................................... management
Description...................................... RAP
 
   
> show macfilter summary
 
   
MAC Filter RADIUS Compatibility mode............. Cisco ACS
MAC Filter Delimiter............................. None
 
   
Local Mac Filter Table
 
   
MAC Address               WLAN Id          Description
-----------------------   --------------   --------------------------------
xx:xx:xx:xx:xx:xx         Any              RAP
xx:xx:xx:xx:xx:xx         Any              PAP2 (2nd hop)
xx:xx:xx:xx:xx:xx         Any              PAP1 (1st hop)

Related Commands

config macfilter
config macfilter description
config macfilter interface
config macfilter ip-address
config macfilter mac-delimiter
config macfilter radius-compat
config macfilter wlan-id

show memory monitor

To view a summary of memory analysis settings and any discovered memory issues, enter this command:

show memory monitor [detail]

Syntax Description

show

Display settings.

memory

Controller memory leak settings.

monitor

Display memory monitoring settings and monitor results summary.

detail

(Optional) Display details of any memory leaks or corruption.


Usage Guidelines


Note Be cautious about changing the defaults for the config memory monitor command unless you know what you are doing, you have detected a problem, and you are collecting troubleshooting information.


Examples

To view a summary of memory monitoring settings and a summary of test results, enter this command:

> show memory monitor

Information similar to the following appears:

Memory Leak Monitor Status:
low_threshold(10000), high_threshold(30000), current status(disabled)
-------------------------------------------
Memory Error Monitor Status:
Crash-on-error flag currently set to (disabled)
No memory error detected.
 
   

To view the details of the monitor test results, enter this command:

> show memory monitor detail

Information similar to the following appears:

Memory error detected. Details:
------------------------------------------------
- Corruption detected at pmalloc entry address:        (0x179a7ec0)
- Corrupt entry:headerMagic(0xdeadf00d),trailer(0xabcd),poison(0xreadceef),
entrysize(128),bytes(100),thread(Unknown task name,task id = (332096592)),
file(pmalloc.c),line(1736),time(1027)
 
   
Previous 1K memory dump from error location.
------------------------------------------------
(179a7ac0): 00000000 00000000 00000000 ceeff00d readf00d 00000080 00000000 00000000
(179a7ae0): 17958b20 00000000 1175608c 00000078 00000000 readceef 179a7afc 00000001
(179a7b00): 00000003 00000006 00000001 00000004 00000001 00000009 00000009 0000020d
(179a7b20): 00000001 00000002 00000002 00000001 00000004 00000000 00000000 5d7b9aba
(179a7b40): cbddf004 192f465e 7791acc8 e5032242 5365788c a1b7cee6 00000000 00000000
(179a7b60): 00000000 00000000 00000000 00000000 00000000 ceeff00d readf00d 00000080
(179a7b80): 00000000 00000000 17958dc0 00000000 1175608c 00000078 00000000 readceef
(179a7ba0): 179a7ba4 00000001 00000003 00000006 00000001 00000004 00000001 00003763
(179a7c00): 1722246c 1722246c 00000000 00000000 00000000 00000000 00000000 ceeff00d
(179a7c20): readf00d 00000080 00000000 00000000 179a7b78 00000000 1175608c 00000078
...

Related Commands

config memory monitor errors
config memory monitor leaks
debug memory

Show Mesh Commands

Use the SHOW MESH commands to display settings for outdoor and indoor mesh access points.

show mesh ap

To display settings for mesh access points, use the show mesh commands.

show mesh ap {summary | tree}

Syntax Description

show

Display settings.

mesh

Mesh access point settings (indoor and outdoor).

summary

Displays a summary of mesh access point information including name, model, bridge virtual interface (BVI) MAC address, United States Computer Emergency Response Team (US-CERT) MAC address, hop, and bridge group name.

tree

Displays a summary of mesh access point information in a tree configuration, including name, hop counter, link signal-to-noise ratio (SNR), and bridge group name.


Examples

To display settings in a summary format, enter this command:

> show mesh ap summary
 
   
AP Name                AP Model             BVI MAC              CERT MAC        Hop    Bridge Group Name
------------------  -------------------  -----------------  ------------------   -----  -----------------
SB_RAP1              AIR-LAP1522AG-A-K9   00:1d:71:0e:d0:00  00:1d:71:0e:d0:00   0      sbox
SB_MAP1              AIR-LAP1522AG-A-K9   00:1d:71:0e:85:00  00:1d:71:0e:85:00   1      sbox
SB_MAP2              AIR-LAP1522AG-A-K9   00:1b:d4:a7:8b:00  00:1b:d4:a7:8b:00   2      sbox
SB_MAP3              AIR-LAP1522AG-A-K9   00:1d:71:0d:ee:00  00:1d:71:0d:ee:00   3      sbox
 
   
Number of Mesh APs............................... 4
Number of RAPs................................... 1
Number of MAPs................................... 3
 
   

To display settings in a hierarchical (tree) format, enter this command:

> show mesh ap tree
 
   
 =======================================================
||  AP Name [Hop Counter, Link SNR, Bridge Group Name] ||
 =======================================================
 
   
[Sector 1]
----------
SB_RAP1[0,0,sbox]
  |-SB_MAP1[1,32,sbox]
    |-SB_MAP2[2,27,sbox]
      |-SB_MAP3[3,30,sbox]
 
   
----------------------------------------------------
Number of Mesh APs............................... 4
Number of RAPs................................... 1
Number of MAPs................................... 3
----------------------------------------------------

Related Commands

Configure Mesh Commands

show mesh astools stats

To display anti-stranding statistics for outdoor mesh access points, use the show mesh astools command.

show mesh astools stats [cisco_ap]

Syntax Description

show

Display settings.

mesh

Mesh access point settings (indoor and outdoor).

astools

Global anti-stranding feature for outdoor mesh access points.

stats

Display global anti-stranding feature statistics.

cisco_ap

Optional. Display anti-stranding feature statistics for a designated mesh access point.


Defaults

None.

Examples

To view anti-stranding statistics on all outdoor mesh access points, enter this command:

> show mesh astools stats
 
   
Total No of Aps stranded : 0
 
   

To view anti-stranding statistics for access point sb_map1, enter this command:

> show mesh astools stats sb_map1
 
   
Total No of Aps stranded : 0

Related Commands

config mesh astools
show mesh config
show mesh stats

show mesh background-scanning

To show whether or not the background-scanning feature is enabled on a mesh network, use the show mesh background-scanning command.

show mesh background-scanning

Syntax Description

show

Display settings.

mesh

Mesh access point settings (indoor and outdoor).

background-scanning

Display state of background-scanning feature.


Usage Guidelines


Note The secondary backhaul access feature is not supported by Cisco 1520 and 1524 indoor mesh access points in the 5.2 release.


Examples

To view the state of the background-scanning feature, enter this command:

> show mesh background-scanning
 
   
Background Scanning State: enabled

Related Commands

config mesh background-scanning
show mesh config
show mesh stats

show mesh backhaul rate-adapt

To show whether or not clients on a mesh network have access to the backhaul channel, and at what level of service, use the show mesh backhaul rate-adapt command.

show mesh backhaul rate-adapt

Syntax Description

show

Display settings.

mesh

Mesh access point settings (indoor and outdoor).

backhaul

Display state of backhaul feature.

rate-adapt

Display at what service level the backhaul client access is set:

All allows clients universal access privileges.

Bronze allows background-level client access privileges.

Silver allows best effort-level client access privileges.

Gold allows video-level client access privileges.

Platinum allows voice-level client access privileges.


Examples

To view the state of the backhaul rate-adaption feature, enter this command:

> show mesh backhaul rate-adapt
 
   
Bronze Queue..................................... Disabled
Gold Queue....................................... Enabled
Platinum Queue................................... Disabled
Silver Queue..................................... Disabled

Related Commands

config mesh backhaul rate-adapt
show mesh config
show mesh stats

show mesh cac

To display call admission control (CAC) topology and the bandwidth used or available in a mesh network, use the show mesh cac commands.

show mesh cac {summary | {bwused {voice | video} | access | callpath | rejected} cisco_ap}

Syntax Description

show

Display settings.

mesh

Mesh access point settings (indoor and outdoor).

cac

Call admission control settings.

summary

Total number of voice calls and voice bandwidth used for each mesh access point.

bwused

Display bandwidth for a selected access point in a tree topology.

access

Display access voice calls in progress in a tree topology.

callpath

Display the call bandwidth distributed across the mesh tree.

rejected

Display voice calls rejected for insufficient bandwidth in a tree topology.

voice

Displays the mesh topology and the voice bandwidth used or available.

video

Displays the mesh topology and the video bandwidth used or available.

cisco_ap

Specifies the mesh access point name.


Examples

> show mesh cac summary
 
   
AP Name              Slot#    Radio  BW Used/Max  Calls                                                     
-----------------  -------  -----  -----------  -----                                                     
SB_RAP1              0        11b/g   0/23437      0
                     1        11a     0/23437      0
SB_MAP1              0        11b/g   0/23437      0 
                     1        11a     0/23437      0 
SB_MAP2              0        11b/g   0/23437      0 
                     1        11a     0/23437      0 
SB_MAP3              0        11b/g   0/23437      0 
                     1        11a     0/23437      0 
 
   
> show mesh cac bwused voice SB_MAP1                                                    
 
   
AP Name                Slot#    Radio      BW Used/Max                                                     
-------------        -------  -----      -----------                                                     
    SB_RAP1              0      11b/g       0/23437
                         1      11a         0/23437
|   SB_MAP1              0      11b/g       0/23437
                         1      11a         0/23437
||  SB_MAP2              0      11b/g       0/23437
                         1      11a         0/23437
||| SB_MAP3              0      11b/g       0/23437
                         1      11a         0/23437 
 
   
> show mesh cac access 1524_Map1
 
    AP Name             Slot#   Radio     Calls
    -------------      -------  -----    -----
    1524_Rap             0      11b/g      0
                         1      11a        0
                         2      11a        0
|   1524_Map1            0      11b/g      0
                         1      11a        0
                         2      11a        0
||  1524_Map2            0      11b/g      0
                         1      11a        0
                         2      11a        0

Related Commands

config 802.11 cac video acm
config 802.11 cac video max-bandwidth
config 802.11 cac video roam-bandwidth
config 802.11 cac video tspec-inactivity-timeout
config 802.11 cac voice acm
config 802.11 cac voice max-bandwidth
config 802.11 cac voice roam-bandwidth
config 802.11 cac voice tspec-inactivity-timeout
config 802.11 cac voice load-based
config 802.11 cac voice stream-size
debug cac

show mesh client-access

To display the backhaul client access configuration setting, use the show mesh client-access command.

show mesh client-access

Syntax Description

show

Display settings.

mesh

Mesh access point settings (indoor and outdoor).

client-access

Display backhaul client access configuration settings.


Examples

> show mesh client-access
Backhaul with client access status: enabled

Related Commands

config mesh client-access

show mesh config

To display mesh configuration settings, use the show mesh config command.

show mesh config

Syntax Description

show

Display settings.

mesh

Mesh access point settings (indoor and outdoor).

config

Display global mesh configuration settings.


Examples

To display global mesh configuration settings, enter this command:

(Sandbox_WLC_01) >show mesh config
 
   
Mesh Range....................................... 12000
Backhaul with client access status............... disabled
Background Scanning State........................ enabled
 
   
Mesh Security
   Security Mode................................. EAP
   External-Auth................................. disabled
   Use MAC Filter in External AAA server......... disabled
   Force External Authentication................. disabled
 
   
Mesh Alarm Criteria
   Max Hop Count................................. 4
   Recommended Max Children for MAP.............. 10
   Recommended Max Children for RAP.............. 20
   Low Link SNR.................................. 12
   High Link SNR................................. 60
   Max Association Number........................ 10
   Association Interval.......................... 60 minutes
   Parent Change Numbers......................... 3
   Parent Change Interval........................ 60 minutes
 
   
Mesh Multicast Mode.............................. In-Out
Mesh Full Sector DFS............................. enabled
 
   
Mesh Ethernet Bridging VLAN Transparent Mode..... enabled

Related Commands

Configure Mesh Commands

show mesh env

To display global or specific environment summary information for mesh networks, use the show mesh env command.

show mesh env {summary | cisco_ap}

Syntax Description

show

Display settings.

mesh

Mesh access point settings (indoor and outdoor).

env

Display mesh environment settings.

summary

Display global environment summary information.

cisco_ap

Name of access point for which environment summary information is requested.


Examples

> show mesh env summary
 
   
AP Name             Temperature(C)  Heater   Ethernet  Battery
------------------  --------------  ------   --------  -------
ap1130:5f:be:90      N/A             N/A      DOWN     N/A
AP1242:b2.31.ea      N/A             N/A      DOWN     N/A
AP1131:f2.8d.92      N/A             N/A      DOWN     N/A
AP1131:46f2.98ac     N/A             N/A      DOWN     N/A
ap1500:62:39:70      -36             OFF      UP       N/A
 
   
> show mesh env SB_RAP1
 
   
AP Name.......................................... SB_RAP1
AP Model......................................... AIR-LAP1522AG-A-K9
AP Role.......................................... RootAP
 
   
Temperature...................................... 21 C, 69 F
Heater........................................... OFF
Backhaul......................................... GigabitEthernet0
 
   
GigabitEthernet0 Status.......................... UP
    Duplex....................................... FULL
    Speed........................................ 100
    Rx Unicast Packets........................... 114754
    Rx Non-Unicast Packets....................... 1464
    Tx Unicast Packets........................... 9630
    Tx Non-Unicast Packets....................... 3331
GigabitEthernet1 Status.......................... DOWN
  POE Out........................................ OFF
 
   
Battery.......................................... N/A

Related Commands

Configure Mesh Commands

show mesh neigh

To display summary or detailed information about the mesh neighbors for a specific mesh access point, use the show mesh neigh command.

show mesh neigh {detail | summary} {cisco_ap | all}

Syntax Description

show

Display configurations.

mesh

Mesh configuration.

neigh

Display mesh access point neighbors.

detail | summary

Enter detail to view the channel and signal-to-noise ratio (SNR) details between the designated mesh access point and its neighbor.

Enter summary to view the mesh neighbors for a designated mesh access point.

cisco_ap

Cisco lightweight access point name.

all

All access points.


Examples

To view a neighbor summary of access point ap1500:62:39:70, enter this command:

> show mesh neighbor summary ap1500:62:39:70
 
   
AP Name/Radio Mac Channel Snr-Up Snr-Down Link-Snr Flags  State
----------------- ------- ------ -------- -------- ------ -------
mesh-45-rap1      165     15     18       16       0x86b  UPDATED NEIGH PARENT BEACON
00:0B:85:80:ED:D0 149     5      6        5        0x1a60 NEED UPDATE BEACON DEFAULT
00:17:94:FE:C3:5F 149     7      0        0        0x860  BEACON
 
   

To view detailed neighbor statistics of access point ap1500:62:39:70, enter this command:

> show mesh neigh detail ap1500:62:39:70
 
   
AP MAC : 00:1E:BD:1A:1A:00 AP Name: HOR1522_MINE06_MAP_S_Dyke 
FLAGS : 860 BEACON 
worstDv 255, Ant 0, channel 153, biters 0, ppiters 0 
Numroutes 0, snr 0, snrUp 8, snrDown 8, linkSnr 8 
adjustedEase 0, unadjustedEase 0 
txParent 0, rxParent 0 
poorSnr 0 
lastUpdate 2483353214 (Sun Aug 4 23:51:58 1912) 
parentChange 0 
Per antenna smoothed snr values: 0 0 0 0 
Vector through 00:1E:BD:1A:1A:00
 
   

Table 1-2 lists the output flags displayed for the show mesh neigh detail command.

Table 1-2 Output Flags for the Show Mesh Neigh Detail Command

Output Flag
Description

AP MAC

MAC address of a mesh neighbor for a designated mesh access point.

AP Name

Name of the mesh access point.

FLAGS

Describes adjacency. The possible values are:

UPDATED—Recently updated neighbor.

NEIGH—One of the top neighbors.

EXCLUDED—Neighbor is currently excluded.

WASEXCLUDED—Neighbor was recently removed from the exclusion list.

PERMSNR—Permanent SNR neighbor.

CHILD—A child neighbor.

PARENT—A parent neighbor.

NEEDUPDATE—Not a current neighbor and needs an update.

BEACON—Heard a beacon from this neighbor.

ETHER—Ethernet neighbor.

worstDv

Worst distance vector through the neighbor.

Ant

Antenna on which the route was received.

channel

Channel of the neighbor.

biters

Number of black list timeouts left.

ppiters

Number of potential parent timeouts left.

Numroutes

Number of distance routes.

snr

Signal to Noise Ratio.

snrUp

SNR of the link to the AP.

snrDown

SNR of the link from the AP.

linkSnr

Calculated SNR of the link.

adjustedEase

Ease to the root AP through this AP. It is based on the current SNR and threshold SNR values.

unadjustedEase

Ease to the root AP through this AP after applying correct for number of hops.

txParent

Packets sent to this node while it was a parent.

rxparent

Packets received from this node while it was a parent.

poorSnr

Packets with poor SNR received from a node.

lastUpdate

Timestamp of the last received message for this neighbor

parentChange

When this node last became parent.

per antenna smoother SNR values

SNR value is populated only for antenna 0.


Related Commands

show mesh config
show mesh env

show mesh path

To display the channel and signal-to-noise ratio (SNR) details for a link between a mesh access point and its neighbor, use the show mesh path command.

show mesh path cisco_ap

Syntax Description

show

Display configurations.

mesh

Mesh configuration.

path

Show channel and SNR details for a designated link path.

cisco_ap

Mesh access point name.


Examples

> show mesh path mesh-45-rap1
 
   
AP Name/Radio Mac Channel Snr-Up Snr-Down Link-Snr Flags State
----------------- ------- ------ -------- -------- ------ -------
mesh-45-rap1      165     15     18       16       0x86b UPDATED NEIGH PARENT BEACON
mesh-45-rap1 is a Root AP.

Related Commands

config mesh backhaul rate-adapt
config mesh client-access
config mesh linktest
config mesh range
show mesh config
show mesh neigh
show mesh stats

show mesh per-stats

To display the percentage of packet errors for packets transmitted by the neighbors of a specified mesh access point, use the show mesh per-stats command.

show mesh per-stats summary {cisco_ap | all}

Syntax Description

show

Display settings.

mesh

Mesh access point settings (indoor and outdoor).

per-stats

Percentage of packet errors transmitted via neighbor access points.

summary

Packet Error Rate stats summary.

cisco_ap

Name of mesh access point.

all

All mesh access points.


Usage Guidelines

The packet error rate percentage equals 1, which is the number of successfully transmitted packets divided by the number of total packets transmitted.

Examples

To display the percentage of packet errors for packets transmitted by the neighbors to mesh access point ap_12, enter this command:

> show mesh per-stats summary ap_12
 
   
Neighbor MAC Address 00:0B:85:5F:FA:F0
Total Packets transmitted:              104833
Total Packets transmitted successfully: 104833
Total Packets retried for transmission: 33028
Neighbor MAC Address:                   00:0B:85:80:ED:D0
Total Packets transmitted:              0
Total Packets transmitted successfully: 0
Total Packets retried for transmission: 0
Neighbor MAC Address:                   00:17:94:FE:C3:5F
Total Packets transmitted:              0
Total Packets transmitted successfully: 0
Total Packets retried for transmission: 0

Related Commands

config mesh linktest
config mesh range
show mesh config
show mesh neigh
show mesh stats

show mesh queue-stats

To view the number of packets in a client access queue by type for a particular mesh access point, use the show mesh queue-stats command.

show mesh queue-stats {cisco_ap | all}

Syntax Description

show

Display settings.

mesh

Mesh access point settings (indoor and outdoor).

queue-stats

Packet queue statistics for client access queues.

cisco_ap

Name of access point for which you want packet queue statistics.

all

All access points.


Examples

To show packet queue statistics for access point ap417, enter this command:

> show mesh queue-stats ap417
 
   
Queue Type Overflows Peak length Average length
---------- --------- ----------- --------------
Silver     0         1           0.000
Gold       0         4           0.004
Platinum   0         4           0.001
Bronze     0         0           0.000
Management 0         0           0.000

Related Commands

config mesh client-access
config mesh multicast
config mesh secondary-backhaul
show mesh client-access
show mesh config
show mesh stats
show mgmtuser

show mesh public-safety

To display 4.8-GHz public safety settings, use the show mesh public-safety command.

show mesh public-safety

Syntax Description

show

Display settings.

mesh

Mesh access point settings (indoor and outdoor).

public-safety

Display 4.8-GHz public safety channel settings.


Examples

To view 4.8-GHz public safety settings, enter this command:

> show mesh public-safety
 
   
Global Public Safety status: disabled

Related Commands

config 802.11-a
config 802.11-a antenna extAntGain
config 802.11-a channel ap
config 802.11-a txpower ap
config mesh public-safety
config mesh security
show mesh ap
show mesh security-stats
show mesh stats

show mesh secbh-stats

To display queue statistics for secondary backhaul access in a mesh network, use the show mesh secbh-stats command.

show mesh secbh-stats {cisco_ap | all}

Syntax Description

show

Display settings.

mesh

Mesh access point settings (indoor and outdoor).

secbh-stats

Secondary backhaul statistics.

cisco_ap

Mesh access point selected for display statistics.

all

All mesh access points.


Usage Guidelines


Note The secondary backhaul access feature is not supported by Cisco 1520 and 1524 indoor mesh access points in the 5.2 release.


Examples

To display statistics for secondary backhaul access of access point SB_RAP1, enter this command:

> show mesh secbh-stats SB_RAP1
 
   
  Radio Type: 802.11BG
    Queue:Silver:
      Packet retries: 0
      Packets dropped after max retries: 0
    Queue:Gold:
      Packet retries: 0
      Packets dropped after max retries: 0
    Queue:Platinum:
      Packet retries: 0
      Packets dropped after max retries: 0
 
   
  Radio Type: 802.11A
    Queue:Silver:
      Packet retries: 0
      Packets dropped after max retries: 0
    Queue:Gold:
      Packet retries: 0
      Packets dropped after max retries: 0
    Queue:Platinum:
      Packet retries: 0
      Packets dropped after max retries: 0

Related Commands

config mesh secondary-backhaul
show mesh secondary-backhaul

show mesh secondary-backhaul

To display the current state of mesh secondary backhaul configuration settings, use the show mesh secondary-backhaul command.

show mesh secondary-backhaul

Syntax Description

show

Display settings.

mesh

Mesh access point settings (indoor and outdoor).

secondary-backhaul

Secondary backhaul configuration settings.


Usage Guidelines


Note The secondary backhaul access feature is not supported by Cisco 1520 and 1524 indoor mesh access points in the 5.2 release.


Examples

> show mesh secondary-backhaul
 
   
MESH secondary-backhaul: enabled

Related Commands

config mesh secondary-backhaul
show mesh secbh-stats

show mesh security-stats

To display packet error statistics for a specific access point, use the show mesh security-stats command.

show mesh security-stats {cisco_ap | all}

Syntax Description

show

Display settings.

mesh

Mesh access point settings (indoor and outdoor).

cisco_ap

Name of access point for which you want packet error statistics.

all

All access points.


Usage Guidelines

This command shows packet error statistics and a count of failures, timeouts, and successes with respect to associations and authentications as well as reassociations and reauthentications for the specified access point and its child.

Examples

To show packet error statistics for access point ap417, enter this command:

> show mesh security-stats ap417
 
   
AP MAC : 00:0B:85:5F:FA:F0
Packet/Error Statistics:
-----------------------------
x Packets 14, Rx Packets 19, Rx Error Packets 0
Parent-Side Statistics:
--------------------------
Unknown Association Requests 0
Invalid Association Requests 0
Unknown Re-Authentication Requests 0
Invalid Re-Authentication Requests 0
Unknown Re-Association Requests 0
Invalid Re-Association Requests 0
Unknown Re-Association Requests 0
Invalid Re-Association Requests 0
Child-Side Statistics:
--------------------------
Association Failures 0
Association Timeouts 0
Association Successes 0
Authentication Failures 0
Authentication Timeouts 0
Authentication Successes 0
Re-Association Failures 0
Re-Association Timeouts 0
Re-Association Successes 0
Re-Authentication Failures 0
Re-Authentication Timeouts 0
Re-Authentication Successes 0

Related Commands

config mesh alarm
config mesh linkdata
config mesh linktest
config mesh security

show mesh stats

To display the mesh statistics for a Cisco lightweight access point, use the show mesh stats command.

show mesh stats cisco_ap

Syntax Description

show

Display configurations.

mesh

Mesh configuration.

stats

Show Cisco lightweight access point statistics.

cisco_ap

Cisco lightweight access point name.


Defaults

None.

Examples

> show mesh stats RAP_ap1
 
   
RAP in state Maint
rxNeighReq 759978, rxNeighRsp 568673
txNeighReq 115433, txNeighRsp 759978
rxNeighUpd 8266447 txNeighUpd 693062
tnextchan 0, nextant 0, downAnt 0, downChan 0, curAnts 0
tnextNeigh 0, malformedNeighPackets 244, poorNeighSnr 27901
blacklistPackets 0, insufficientMemory 0
authenticationFailures 0
Parent Changes 1, Neighbor Timeouts 16625

Related Commands

config mesh alarm
config mesh client-access
config mesh ethernet-bridging vlan-transparent
config mesh linkdata
config mesh linktest
config mesh security
show mesh per-stats
show mesh queue-stats
show mesh security-stats

show mgmtuser

To display the local management user accounts on the Cisco Wireless LAN controller, use the show mgmtuser command.

show mgmtuser

Syntax Description

show

Display settings.

mgmtuser

List of management users.


Examples

> show mgmtuser
 
   
User Name                Permissions   Description
-----------------------  ------------  --------------------------------
admin                    read-write

Related Commands

config mgmtuser add
config mgmtuser delete
config mgmtuser password

Show Mobility Commands

Use the show mobility commands to display mobility settings.

show mobility anchor

To display the wireless LAN anchor export list for the Cisco Wireless LAN controller mobility groups or to display a list and status of controllers configured as mobility anchors for a specific WLAN or wired guest LAN, use the show mobility anchor commands.

show mobility anchor [wan wlan_id | guest-lan guest_lan_id]

Syntax Description

show

Display settings.

mobility

Mobility group.

anchor

Displays the mobility wireless LAN anchor list.

wlan

Wireless LAN mobility group settings.

wlan_id

A wireless LAN identifier between 1 and 512 (inclusive).

guest-lan

Guest LAN mobility group settings.

guest_lan_id

A guest LAN indentifier between 1 and 5 (inclusive).


Defaults

None.

Usage Guidelines

The status field display (see example) shows one of the following values:

UP—The controller is reachable and able to pass data.

CNTRL_PATH_DOWN—The mpings failed. The controller cannot be reached through the control path and is considered failed.

DATA_PATH_DOWN—The epings failed. The controller cannot be reached and is considered failed.

CNTRL_DATA_PATH_DOWN—Both the mpings and epings failed. The controller cannot be reached and is considered failed.

Examples

> show mobility anchor
 
   
Mobility Anchor Export List
 
   
 WLAN ID     IP Address            Status
 -------     ---------------       ------
 12           192.168.0.15         UP
 
   
 GLAN ID     IP Address            Status
 -------     ---------------       -------
 1           192.168.0.9           CNTRL_DATA_PATH_DOWN

Related Commands

config guest-lan mobility anchor
config mobility group domain
config mobility group keepalive count
config mobility group keepalive interval
config mobility group member
config mobility group multicast-address
config mobility multicast-mode
config mobility secure-mode
config mobility statistics reset
config wlan mobility anchor
debug mobility
show mobility anchor
show mobility statistics
show mobility summary

show mobility statistics

To display the statistics information for the Cisco Wireless LAN controller mobility groups, use the show mobility statistics command.

show mobility statistics

Syntax Description

show

Display settings.

mobility

Mobility group.

statistics

Displays statistics for the mobility manager.


Defaults

None.

Examples

> show mobility statistics
 
   
Global Mobility Statistics
   Rx Errors..................................... 0
   Tx Errors..................................... 0
   Responses Retransmitted....................... 0
   Handoff Requests Received..................... 0
   Handoff End Requests Received................. 0
   State Transitions Disallowed.................. 0
   Resource Unavailable.......................... 0
Mobility Initiator Statistics
   Handoff Requests Sent......................... 0
   Handoff Replies Received...................... 0
   Handoff as Local Received..................... 2
   Handoff as Foreign Received................... 0
   Handoff Denys Received........................ 0
   Anchor Request Sent........................... 0
   Anchor Deny Received.......................... 0
   Anchor Grant Received......................... 0
   Anchor Transfer Received...................... 0
Mobility Responder Statistics
   Handoff Requests Ignored...................... 0
   Ping Pong Handoff Requests Dropped............ 0
   Handoff Requests Dropped...................... 0
   Handoff Requests Denied....................... 0
   Client Handoff as Local....................... 0
   Client Handoff as Foreign  ................... 0
   Client Handoff Inter Group ................... 0
   Anchor Requests Received...................... 0
   Anchor Requests Denied........................ 0
   Anchor Requests Granted....................... 0
   Anchor Transferred............................ 0

Related Commands

config mobility group anchor
config mobility group domain
config mobility group keepalive count
config mobility group keepalive interval
config mobility group member
config mobility group multicast-address
config mobility multicast-mode
config mobility secure-mode
config mobility statistics reset
debug mobility
show mobility anchor
show mobility summary

show mobility summary

To display the summary information for the Cisco Wireless LAN controller mobility groups, use the show mobility summary command.

show mobility summary

Syntax Description

show

Display settings.

mobility

Mobility group.

summary

Displays a summary of the mobility manager.


Defaults

None.

Examples

> show mobility summary
 
   
Symmetric Mobility Tunneling (current) .......... Disabled
Symmetric Mobility Tunneling (after reboot) ..... Disabled
Mobility Protocol Port........................... 16666
Mobility Security Mode........................... Disabled
Default Mobility Domain.......................... snmp_gui
Multicast Mode .................................. Disabled
Mobility Domain ID for 802.11r................... 0x66bd
Mobility Keepalive Interval...................... 10
Mobility Keepalive Count......................... 3
Mobility Group Members Configured................ 1
Mobility Control Message DSCP Value.............. 0
 
   
Controllers configured in the Mobility Group
MAC Address        IP Address       Group Name         Multicast IP 	Status
00:1b:d4:6b:87:20    1.100.163.70     snmp_gui         0.0.0.0	       Up

Note Some WLAN controllers may list no mobility security mode.


Related Commands

config guest-lan mobility anchor
config mobility group domain
config mobility group keepalive count
config mobility group keepalive interval
config mobility group member
config mobility group multicast-address
config mobility multicast-mode
config mobility secure-mode
config mobility statistics reset
config wlan mobility anchor
debug mobility
show mobility anchor
show mobility statistics

show msglog

To display the message logs written to the Cisco Wireless LAN controller database, use the show msglog command. If there are more that 15 entries you are prompted to display the messages shown in the example.

show msglog

Syntax Description

show

Display settings.

msglog

Shows message logs.


Defaults

None.

Examples

> show msglog
 
   
Message Log Severity Level..................... ERROR
Thu Aug  4 14:30:08 2005  [ERROR] spam_lrad.c 1540: AP 00:0b:85:18:b6:50 associated. Last 
AP failure was due to Link Failure
Thu Aug  4 14:30:08 2005  [ERROR] spam_lrad.c 13840: Updating IP info for AP 00:
0b:85:18:b6:50 -- static 0, 1.100.49.240/255.255.255.0, gtw 1.100.49.1
Thu Aug  4 14:29:32 2005  [ERROR] dhcpd.c 78: dhcp server: binding to 0.0.0.0
Thu Aug  4 14:29:32 2005  [ERROR] rrmgroup.c 733: Airewave Director: 802.11a switch group 
reset
Thu Aug  4 14:29:32 2005  [ERROR] rrmgroup.c 733: Airewave Director: 802.11bg sw
itch group reset
Thu Aug  4 14:29:22 2005  [ERROR] sim.c 2841: Unable to get link state for primary port 0 
of interface ap-manager
Thu Aug  4 14:29:22 2005  [ERROR] dtl_l2_dot1q.c 767: Unable to get USP
Thu Aug  4 14:29:22 2005  Previous message occurred 2 times
Thu Aug  4 14:29:14 2005  [CRITICAL] osapi_sem.c 794: Error!  osapiMutexTake called with 
NULL pointer: osapi_bsntime.c:927
Thu Aug  4 14:29:14 2005  [CRITICAL] osapi_sem.c 794: Error!  osapiMutexTake called with 
NULL pointer: osapi_bsntime.c:919
Thu Aug  4 14:29:14 2005  [CRITICAL] hwutils.c 1861: Security Module not found
Thu Aug  4 14:29:13 2005  [CRITICAL] bootos.c 791: Starting code...

Related Commands

show eventlog

show nac statistics

To display detailed Network Access Control (NAC) information about a Cisco Wireless LAN controller, use the show nac statistics command.

show nac statistics

Syntax Description

show

Display settings.

nac

Network access control.

statistics

Detailed statistics.


Defaults

None.

Examples

> show nac statistics
 
   
Server Index....................................................... 1
Server Address..................................................... xxx.xxx.xxx.xxx
Number of requests sent............................................ 0
Number of retransmissions.......................................... 0
Number of requests received........................................ 0
Number of malformed requests received.............................. 0
Number of bad auth requests received............................... 0
Number of pending requests......................................... 0
Number of timed out requests....................................... 0
Number of misc dropped request received............................ 0
Number of requests sent............................................ 0 

Related Commands

show nac summary
config guest-lan nac
config wlan nac
debug nac

show nac summary

To display NAC summary information for a Cisco Wireless LAN controller, use the show nac summary command.

show nac summary

Syntax Description

show

Display settings.

nac

Network Access Control.

summary

Summary information.


Examples

> show nac summary
 
   
NAC ACL Name ...............................................
Index  Server Address                            Port     State
-----  ----------------------------------------  ----     -----
1      xxx.xxx.xxx.xxx                           13336    Enabled 

Related Commands

show nac statistics
config guest-lan nac
config wlan nac
debug nac

show netuser

This command is used display detailed login information about a specified netuser or displays a summary information on all network users.

To show the configuration of a particular user in the local user database—show netuser detail username.

To list all users in the local user database—show netuser summary.

Syntax Description

detail

Displays detailed information on the specified network user.

username

Specifies a network username (up to 24 alphanumeric characters).

summary

Displays summary information on all network users.


Examples

> show netuser summary
 
   
Maximum logins allowed for a given user name ........Unlimited
 
   
> show netuser detail john10
 
   
User Name........................................... abc
WLAN Id............................................. Any
Lifetime............................................ Permanent
Description......................................... test user

Related Commands

Configure Net User Commands
show netuser guest-roles

show netuser guest-roles

To display a list of the current QoS roles and their bandwidth parameters, use the show netuser guest-roles command.

show netuser guest-roles

Syntax Description

show

Displays parameters.

netuser

Local network user.

guest-role

QoS role for the guest user.


Examples

> show netuser guest-roles
 
   
Role Name.............................. Contractor
	Average Data Rate.................. 10
	Burst Data Rate.................... 10
	Average Realtime Rate.............. 100
	Burst Realtime Rate................ 100
 
   
Role Name.............................. Vendor
	Average Data Rate.................. unconfigured
	Burst Data Rate.................... unconfigured
	Average Realtime Rate.............. unconfigured
	Burst Realtime Rate................ unconfigured
 
   

Related Commands

Configure Net User Commands
show netuser

show network

To display the current status of 802.3 bridging for all WLANs, use the show network command.

show network

Syntax Description

show

Display settings.

network

802.3 bridging settings.


Defaults

None.

Examples

> show network

Related Commands

Configure Network Commands
show network summary
show network multicast mgid detail
show network multicast mgid summary

show network summary

To display the network configuration of the Cisco Wireless LAN controller, use the show network summary command.

show network summary

Syntax Description

show

Display settings.

network

Network configuration settings.

summary

Summary of network configuration.


Defaults

None.

Examples

> show network summary
 
   
RF-Network Name............................. RF
Web Mode.................................... Disable
Secure Web Mode............................. Enable
Secure Web Mode Cipher-Option High.......... Disable
Secure Web Mode Cipher-Option SSLv2......... Disable
Secure Shell (ssh).......................... Enable
Telnet...................................... Enable
Ethernet Multicast Forwarding............... Enable
Ethernet Broadcast Forwarding............... Disable
AP Multicast/Broadcast Mode................. Unicast
IGMP snooping............................... Disabled
IGMP timeout................................ 60 seconds
User Idle Timeout........................... 300 seconds
ARP Idle Timeout............................ 300 seconds
ARP Unicast Mode............................ Disabled
Cisco AP Default Master..................... Disable
Mgmt Via Wireless Interface................. Disable
Mgmt Via Dynamic Interface.................. Disable
Bridge MAC filter Config.................... Enable
Bridge Security Mode........................ EAP
Over The Air Provisioning of AP's........... Enable
Apple Talk ................................. Disable

Related Commands

Configure Network Commands
show network
show network multicast mgid detail
show network multicast mgid summary

show network multicast mgid detail

To display all the clients joined to the multicast group in a specific MGID, use the show network multicast mgid detail command.

show network multicast mgid detail mgid_value

Syntax Description

show

Display settings.

network

Network configuration.

mgid_value

Number between 550 and 4095.


Defaults

None.

Examples

> show network multicast mgid detail
 
   
Mgid ............................... 550
Multicast Group Address ............ 239.255.255.250
Vlan ............................... 0
Rx Packet Count .................... 807399588
No of clients ...................... 1
Client List ........................ 
		Client MAC 	 				Expire TIme (mm:ss)
	 	00:13:02:23:82:ad 	 0:20

Related Commands

Configure Network Commands
show network
show network summary
show network multicast mgid summary

show network multicast mgid summary

To display all the multicast groups and their corresponding MGIDs, use the show network multicast mgid summary command.

show network multicast mgid summary

Syntax Description

show

Display settings.

network

Network configuration.


Examples

> show network multicast mgid summary
 
   
Layer2 MGID Mapping:
-------------------
InterfaceName 		 		 		 	 vlanId 		 	MGID
----------------------------- ------ 	-----
management 	 	 	 	 			 0 	 	 	0
test 	 	 			 		 0 			9
wired 	 						 20 	 		8
 
   
Layer3 MGID Mapping:
-------------------
Number of Layer3 MGIDs ................ 1
 
   
	Group address 	 	 	 	 	Vlan 	 	MGID
	------------------ 	----- 	 ------
	239.255.255.250 		 	 	 0 	 	 	550
 
   

Related Commands

Configure Network Commands
show network
show network summary
show network multicast mgid detail

show nmsp notify-interval summary

To display the Network Mobility Services Protocol (NMSP) configuration settings, use the show nmsp notify-interval summary command.

Syntax Description

This command has no arguments or keywords.

Examples

>show nmsp notify-interval summary
 
   
NMSP Notification Interval Summary
 
   
 Client
        Measurement interval:    2 sec
 RFID
        Measurement interval:    8 sec
 Rogue AP
        Measurement interval:    2 sec
 Rogue Client
        Measurement interval:    2 sec

Related Commands

clear locp statistics
clear nmsp statistics
config nmsp notify-interval measurement
show nmsp statistics
show nmsp status

show nmsp statistics

To display Network Mobility Services Protocol (NMSP) counters, use the show nmsp statistics command.

show nmsp statistics {summary | connection all}

Syntax Description

show

Display settings.

nmsp

Network Mobility Services Protocol settings.

statistics

Display NMSP counters.

summary

Display common NMSP counters.

connection all

Display all connection-specific counters.


Examples

To display a summary of common NMSP counters, enter this command:

> show nmsp statistics summary
 
   
Send RSSI with no entry:               0
Send too big msg:                      0
Failed SSL write:                      0
Partial SSL write:                     0
SSL write attempts to want write:
Transmit Q full:0
Max Measure Notify Msg:                0
Max Info Notify Msg:                   0
Max Tx Q Size:                         2
Max Rx Size:                           1
Max Info Notify Q Size:                0
 
   
Max Client Info Notify Delay:          0
Max Rogue AP Info Notify Delay:        0
Max Rogue Client Info Notify Delay:    0
Max Client Measure Notify Delay:       0
Max Tag Measure Notify Delay:          0
Max Rogue AP Measure Notify Delay:     0
Max Rogue Client Measure Notify Delay: 0
Max Client Stats Notify Delay:         0
Max Tag Stats Notify Delay:            0
RFID Measurement Periodic :            0
RFID Measurement Immediate :           0
Reconnect Before Conn Timeout:         0
 
   

To display all the connection-specific NMSP counters, enter this command:

> show nmsp statistics connection all
 
   
NMSP Connection Counters
Connection 1 :
 Connection status:  UP
 Freed Connection:    0
 Nmsp Subscr Req:     0          NMSP Subscr Resp:   0
 Info Req:            1          Info Resp:          1
 Measure Req:         2          Measure Resp:        2
 Stats Req:           2          Stats Resp:          2
 Info Notify:         0          Measure Notify:      0
 Loc Capability:      2
 Location Req:        0          Location Rsp:        0
 Loc Subscr Req:      0          Loc Subscr Rsp:      0
 Loc Notif:           0
 Loc Unsubscr Req:    0          Loc Unsubscr Rsp:    0
 IDS Get Req:         0          IDS Get Resp:        0
 IDS Notif:           0
 IDS Set Req:         0          IDS Set Resp:        0

Related Commands

clear nmsp statistics
config nmsp notify-interval measurement
show nmsp notify-interval summary
show nmsp status

show nmsp status

To display the status of active Network Mobility Services Protocol (NMSP) connections, use the show nmsp status command.

show nmsp status

Syntax Description

This command has no arguments or keywords.

Examples

>show nmsp status
 
   
LocServer IP   TxEchoResp  RxEchoReq TxData  RxData
-------------- ----------- --------- ------- -------
171.71.132.158 21642       21642     51278   21253

Related Commands

clear locp statistics
clear nmsp statistics
config nmsp notify-interval measurement
show nmsp notify-interval summary
show nmsp statistics

show nmsp subscription

To display the Network Mobility Services Protocol (NMSP) services that are active on the controller, use the show nmsp subscription command.

show nmsp subscription {summary | detail [ip_addr]}

Syntax Description

show

Display settings.

nmsp

Network Mobility Services Protocol settings.

subscription

Display NMSP counters.

summary

Display all of the NMSP services to which the controller is subscribed.

detail

Display details for all of the NMSP services to which the controller is subscribed.

ip_addr

Display details only for the NMSP services subscribed to by a specific IP address.


Examples

>show nmsp subscription summary
 
   
Mobility Services Subscribed:
 
   
Server IP          Services
---------          --------
10.10.10.31        RSSI, Info, Statistics
 
   
>show nmsp subscription detail 10.10.10.31
 
   
Mobility Services Subscribed by 10.10.10.31
 
   
Services          Sub-services
--------          ------------
RSSI              Mobile Station, Tags,
Info              Mobile Station,
Statistics        Mobile Station, Tags,

Related Commands

clear locp statistics
clear nmsp statistics
config nmsp notify-interval measurement
show nmsp notify-interval summary
show nmsp statistics

show pmk-cache

To display information about the pairwise master key (PMK) cache, use the show port command.

show pmk-cache {all | MAC}

Syntax Description

show

Display settings.

pmk-cache

PMK cache settings.

all

Displays information about all entries in the PMK cache.

MAC

Displays information about a single entry in the PMK cache.


Examples

> show pmk-cache xx:xx:xx:xx:xx:xx
 
   
 
   
> show pmk-cache all
 
   
PMK Cache
                    Entry
Station             Lifetime   VLAN Override          IP Override
-----------------   --------   --------------------   ---------------

Related Commands

config pmk-cache delete

show port

To display the Cisco Wireless LAN controller port settings on an individual or global basis, use the show port command.

show port {port | summary}

Syntax Description

show

Display settings.

port

Cisco Wireless LAN controller port.

port | summary

Individual port or all ports.


Examples

> show port 1
 
   
           STP   Admin   Physical   Physical   Link   Link    Mcast
Pr  Type   Stat   Mode     Mode      Status   Status  Trap   Appliance   POE
-- ------- ---- ------- ---------- ---------- ------ ------- --------- -------
1  Normal  Disa Enable  Auto       1000 Full  Down   Enable  Enable     N/A

Note Some WLAN controllers may not have multicast or Power over Ethernet (PoE) listed because they do not support those features.


 
   
> show port summary
 
   
           STP   Admin   Physical   Physical   Link   Link    Mcast
Pr  Type   Stat   Mode     Mode      Status   Status  Trap   Appliance   POE
-- ------- ---- ------- ---------- ---------- ------ ------- --------- -------
1  Normal  Forw Enable  Auto       1000 Full  Up     Enable  Enable     N/A
2  Normal  Disa Enable  Auto       1000 Full  Down   Enable  Enable     N/A
3  Normal  Disa Enable  Auto       1000 Full  Down   Enable  Enable     N/A
4  Normal  Disa Enable  Auto       1000 Full  Down   Enable  Enable     N/A
 
   

Note Some WLAN controllers may have only one port listed because they have only one physical port.


Related Commands

clear stats port
config ap port
config interface port
config network web-auth-port
Configure Port Commands
config spanningtree port mode
config spanningtree port pathcost
config spanningtree port priority
show stats port

show process

To display how various processes in the system are using the CPU at that instant in time, use the show process commands.

show process {cpu | memory}

Syntax Description

show

Display settings.

process

System task settings.

cpu

Display how various system tasks are using the CPU at that moment.

memory

Display the allocation and deallocation of memory from various processes in the system at that moment.


Usage Guidelines

This command is helpful in understanding if any single task is monopolizing the CPU and preventing other tasks from being performed.

Examples

To show how various tasks in the system are using the CPU at a given moment, enter this command:

> show process cpu
 
   
Name				Priority 			CPU Use 			Reaper
 reaperWatcher				( 3/124) 			0 %			( 0/ 0)% 			I
 osapiReaper				(10/121) 			0 % 			( 0/ 0)% 			I
 TempStatus				(255/ 1) 			0 % 			( 0/ 0)% 			I
 emWeb				(255/ 1) 			0 % 			( 0/ 0)% 			T 300
 cliWebTask				(255/ 1) 			0 % 			( 0/ 0)% 			I
 UtilTask				(255/ 1) 			0 % 			( 0/ 0)% 			T 300
 
   

To show the allocation and deallocation of memory from various processes at a given moment, enter this command:

> show process memory
 
   
Name				Priority 			BytesinUse 			Reaper
 reaperWatcher				( 3/124) 			0			( 0/ 0)% 			I
 osapiReaper				(10/121) 			0 			( 0/ 0)% 			I
 TempStatus				(255/ 1) 			308 			( 0/ 0)% 			I
 emWeb				(255/ 1) 			294440 			( 0/ 0)% 			T 300
 cliWebTask				(255/ 1) 			738 			( 0/ 0)% 			I
 UtilTask				(255/ 1) 			308 			( 0/ 0)% 			T 300

Related Commands

debug memory
transfer upload datatype

show qos queue_length all

To display quality of service (QoS) information (queue length), use the show qos command.

show qos queue_length all

Syntax Description

show

Display settings.

qos

Quality of Service information.

queue_length all

Displays queue lengths.


Examples

> show qos queue_length all
 
   
Platinum queue length.......................... 255
Gold queue length.............................. 255
Silver queue length............................ 150
Bronze queue length............................ 100

Related Commands

config qos

Show Radius Commands

Use the show radius commands to display RADIUS settings.

show radius acct statistics

To display the RADIUS accounting server statistics for the Cisco Wireless LAN controller, use the show radius acct statistics command.

show radius acct statistics

Syntax Description

show

Display settings.

radius acct

RADIUS accounting server.

statistics

Displays RADIUS accounting server statistics.


Defaults

None.

Examples

> show radius acct statistics
 
   
Accounting Servers:
Server Index..................................... 1
Server Address................................... 10.1.17.10
Msg Round Trip Time.............................. 0 (1/100 second)
First Requests................................... 0
Retry Requests................................... 0
Accounting Responses............................. 0
Malformed Msgs................................... 0
Bad Authenticator Msgs........................... 0
Pending Requests................................. 0
Timeout Requests................................. 0
Unknowntype Msgs................................. 0
Other Drops...................................... 0

Related Commands

config advanced probe filter
config advanced probe limit
config radius fallback-test
show advanced probe
show radius auth statistics
show radius summary

show radius auth statistics

To display the RADIUS authentication server statistics for the Cisco Wireless LAN controller, use the show radius auth statistics command.

show radius auth statistics

Syntax Description

show

Display settings.

radius auth

RADIUS authentication server.

statistics

Displays RADIUS authentication server statistics.


Defaults

None.

Examples

> show radius auth statistics
 
   
Authentication Servers:
  Server Index..................................... 1
  Server Address................................... 1.1.1.1
  Msg Round Trip Time.............................. 0 (1/100 second)
  First Requests................................... 0
  Retry Requests................................... 0
  Accept Responses................................. 0
  Reject Responses................................. 0
  Challenge Responses.............................. 0
  Malformed Msgs................................... 0
  Bad Authenticator Msgs........................... 0
  Pending Requests................................. 0
  Timeout Requests................................. 0
  Unknowntype Msgs................................. 0
  Other Drops...................................... 0

Related Commands

show radius acct statistics
show radius summary

show radius rfc3576 statistics

To display the RADIUS rfc3576 server statistics for the Cisco Wireless LAN controller, use the show radius rfc3576 statistics command.

show radius rfc3576 statistics

Syntax Description

show

Display settings.

radius rfc3576

RADIUS RFC3576 server.

statistics

Displays RADIUS RFC-3576 server statistics.


Usage Guidelines

RFC 3576, an extension to the RADIUS protocol, allows dynamic changes to a user session. This includes support for disconnecting users and changing authorizations applicable to a user session; that is, it provides support for Disconnect and Change-of-Authorization (CoA) messages. Disconnect messages cause a user session to be terminated immediately, whereas CoA messages modify session authorization attributes such as data filters.

Examples

> show radius rfc3576 statistics
 
   
RFC-3576 Servers:
Server Index..................................... 1
Server Address................................... 10.1.17.10
Msg Round Trip Time.............................. 0 (1/100 second)
First Requests................................... 0
Retry Requests................................... 0
Accounting Responses............................. 0
Malformed Msgs................................... 0
Bad Authenticator Msgs........................... 0
Pending Requests................................. 0
Timeout Requests................................. 0
Unknown type Msgs................................. 0
Other Drops...................................... 0

Related Commands

show radius auth statistics
show radius summary
show radius rfc3576

show radius summary

To display the RADIUS authentication and accounting server summary, use the show radius summary command.

show radius summary

Syntax Description

show

Display settings.

radius

RADIUS authentication server.

summary

Server summary.


Defaults

None.

Examples

> show radius summary
 
   
Vendor Id Backward Compatibility................. Disabled
Credentials Caching.............................. Disabled
Call Station Id Type............................. IP Address
Administrative Authentication via RADIUS......... Enabled
 
   
Authentication Servers
 
   
Index  Type  Server Address    Port    State     Tout  RFC-3576  IPSec - AuthMod
e/Phase1/Group/Lifetime/Auth/Encr
-----  ----  ----------------  ------  --------  ----  --------  ---------------
---------------------------------
 
   
Accounting Servers
 
   
Index  Type  Server Address    Port    State     Tout  RFC-3576  IPSec - AuthMod
e/Phase1/Group/Lifetime/Auth/Encr
-----  ----  ----------------  ------  --------  ----  --------  ---------------
---------------------------------

Related Commands

show radius auth statistics
show radius acct statistics

Show Radio Frequency ID Commands

Use the show rfid commands to display radio frequency ID settings.

show rfid client

To list the RFID tags that are associated to the controller as clients, use the show rfid client command.

show rfid client

Syntax Description

This command has no arguments or keywords.

Usage Guidelines

When the RFID tag is not in client mode, the above fields are blank.

Examples

When the RFID tag is in client mode, information similar to the following appears:

> show rfid client
 
   
------------------ 	-------- --------- ----------------- ------ ----------------
                         			 	 	 	 	 Heard                                             
   RFID Mac      	 			 	 VENDOR   Sec Ago    Associated AP    Chnl    Client State  
------------------ 	-------- --------- ----------------- ------ ----------------
 
   
00:14:7e:00:0b:b1 	 	 Pango 	 	 	 	 	 35  	 	 AP0019.e75c.fef4 	 	 1  	 	 	 	 Probing  

Related Commands

config rfid
show rfid config
show rfid detail
show rfid summary

show rfid config

This command is used to display the current RFID configuration settings.

show rfid config

Syntax Description

This command has no arguments or keywords.

Examples

> show rfid config
 
   
RFID Tag Data Collection ............................... Enabled
RFID Tag Auto-Timeout .................................. Enabled
RFID Client Data Collection ............................ Disabled
RFID Data Timeout ...................................... 200 seconds
 
   

Related Commands

config rfid
show rfid detail
show rfid summary

show rfid detail

This command is used to display detailed RFID information for a specified tag.

show rfid detail mac_address

Syntax Description

mac_address

Specifies the MAC address of an RFID tag.


Examples

> show rfid detail 32:21:3a:51:01:02
 
   
RFID address..................................... 00:12:b8:00:20:52
Vendor........................................... G2
Last Heard....................................... 51 seconds ago
Packets Received................................. 2
Bytes Received................................... 324
Cisco Type.......................................
 
   
Content Header
=================
Version.......................................... 0
Tx Power......................................... 12 dBm
Channel.......................................... 1
Reg Class........................................ 12
Burst Length..................................... 1
 
   
CCX Payload
===========
Last Sequence Control............................ 0
Payload length................................... 127
Payload Data Hex Dump
 
01 09 00 00 00 00 0b 85 52 52 52 02 07 4b ff ff
7f ff ff ff 03 14 00 12 7b 10 48 53 c1 f7 51 4b
50 ba 5b 97 27 80 00 67 00 01 03 05 01 42 34 00
00 03 05 02 42 5c 00 00 03 05 03 42 82 00 00 03
05 04 42 96 00 00 03 05 05 00 00 00 55 03 05 06
42 be 00 00 03 02 07 05 03 12 08 10 00 01 02 03
04 05 06 07 08 09 0a 0b 0c 0d 0e 0f 03 0d 09 03
08 05 07 a8 02 00 10 00 23 b2 4e 03 02 0a 03
 
Nearby AP Statistics:
	 lap1242-2(slot 0, chan 1) 50 seconds ag.... -76 dBm
     		 lap1242(slot 0, chan 1) 50 seconds ago..... -65 dBm

Related Commands

config rfid
show rfid config

show rfid summary

This command is used to display detailed RFID information for a specified tag.

show rfid summary

Syntax Description

This command has no arguments or keywords.

Examples

> show rfid summary
 
   
Total Number of RFID   : 5
----------------- -------- ------------------ ------ ---------------------
     RFID ID      VENDOR       Closest AP      RSSI  Time Since Last Heard
----------------- -------- ------------------ ------ ---------------------
 
   
00:04:f1:00:00:04 Wherenet ap:1120             -51      858 seconds ago
00:0c:cc:5c:06:d3 Aerosct  ap:1120             -51       68 seconds ago
00:0c:cc:5c:08:45 Aerosct  AP_1130             -54      477 seconds ago
00:0c:cc:5c:08:4b Aerosct  wolverine           -54      332 seconds ago
00:0c:cc:5c:08:52 Aerosct  ap:1120             -51      699 seconds ago
 
   

Related Commands

config rfid
show rfid config
show rfid detail

Show Rogue Commands

Use the show rogue commands to display unverified (rogue) device settings.

show rogue adhoc detailed

To show details of an ad-hoc rogue access point detected by the Cisco Wireless LAN controller, use the show rogue adhoc client detailed command.

show rogue adhoc detailed MAC

Syntax Description

show

Display settings.

rogue adhoc

Ad-hoc rogue.

detailed

Displays detailed information.

MAC

Ad-hoc rogue MAC address.


Examples

> show rogue adhoc detailed 02:61:ce:8e:a8:8c
 
   
Adhoc Rogue MAC address.......................... 02:61:ce:8e:a8:8c
Adhoc Rogue BSSID................................ 02:61:ce:8e:a8:8c
State............................................ Alert
First Time Adhoc Rogue was Reported.............. Tue Dec 11 20:45:45 2007
Last Time Adhoc Rogue was Reported............... Tue Dec 11 20:45:45 2007
Reported By
AP 1
MAC Address.............................. 00:14:1b:58:4a:e0
Name..................................... AP0014.1ced.2a60
Radio Type............................... 802.11b
SSID..................................... rf4k3ap
Channel.................................. 3
RSSI..................................... -56 dBm
SNR...................................... 15 dB
Encryption............................... Disabled
ShortPreamble............................ Disabled
WPA Support.............................. Disabled
Last reported by this AP............... Tue Dec 11 20:45:45 2007
 
   

Related Commands

config rogue adhoc
config rogue rule
show rogue adhoc summary
show rogue ignore-list
show rogue rule detailed
show rogue rule summary

show rogue adhoc summary

To display a summary of the ad-hoc rogue access points detected by the Cisco Wireless LAN controller, use the show rogue adhoc summary command.

show rogue adhoc summary

Syntax Description

show

Display settings.

rogue adhoc

Ad-hoc rogue access point.

summary

Displays a list of all Adhoc Rogues.


Examples

> show rogue adhoc summary
Detect and report Ad-Hoc Networks................ Enabled
 
   
Client MAC Address   Adhoc BSSID    State  # APs       Last Heard
------------------   -----------    -----    ---       -------
xx:xx:xx:xx:xx:xx    super          Alert    1         Sat Aug  9 21:12:50 2004
xx:xx:xx:xx:xx:xx                   Alert    1         Aug  9 21:12:50 2003
xx:xx:xx:xx:xx:xx                   Alert    1         Sat Aug  9 21:10:50 2003 

Related Commands

config rogue adhoc
config rogue rule
show rogue adhoc detailed
show rogue ignore-list
show rogue rule detailed
show rogue rule summary

show rogue ap clients

To show details of a rogue access point clients detected by the Cisco Wireless LAN controller, use the show rogue ap clients command.

show rogue ap clients ap_mac_address

Syntax Description

show

Display settings.

rogue ap

Rogue access point.

clients

Summary information.

ap_mac_address

Rogue access point MAC address.


Examples

> show rogue ap clients xx:xx:xx:xx:xx:xx
MAC Address State # APs Last Heard
----------------- ------------------ ----- -------------------------
00:bb:cd:12:ab:ff Alert 1 Fri Nov 30 11:26:23 2007
 
   

Related Commands

config rogue ap classify
config rogue ap friendly
config rogue ap rldp
config rogue ap ssid
config rogue ap timeout
config rogue ap valid-client
config rogue rule
config trapflags rogueap
show rogue ap detailed
show rogue ap summary
show rogue ap friendly summary
show rogue ap malicious summary
show rogue ap unclassified summary

show rogue ap detailed

To show details of a rogue access point detected by the Cisco Wireless LAN controller, use the show rogue-ap detailed command.

show rogue ap detailed ap_mac_address

Syntax Description

show

Display settings.

rogue ap

Rogue access point.

detailed

Displays detailed information.

ap_mac_address

Rogue access point MAC address.


Examples

> show rogue ap detailed xx:xx:xx:xx:xx:xx
 
   
Rogue BSSID...................................... 00:0b:85:63:d1:94
Is Rogue on Wired Network........................ No
Classification................................... Unclassified
State............................................ Alert
First Time Rogue was Reported.................... Fri Nov 30 11:24:56 2007
Last Time Rogue was Reported..................... Fri Nov 30 11:24:56 2007
Reported By
AP 1
MAC Address.............................. 00:12:44:bb:25:d0
Name..................................... HReap
Radio Type............................... 802.11g
SSID..................................... edu-eap
Channel.................................. 6
RSSI..................................... -61 dBm
SNR...................................... -1 dB
Encryption............................... Enabled
ShortPreamble............................ Enabled
WPA Support.............................. Disabled
Last reported by this AP.............. Fri Nov 30 11:24:56 2007
 
   

Related Commands

config rogue ap classify
config rogue ap friendly
config rogue ap rldp
config rogue ap ssid
config rogue ap timeout
config rogue ap valid-client
config rogue rule
show rogue ap clients
show rogue ap summary
show rogue ap friendly summary
show rogue ap malicious summary
show rogue ap unclassified summary

show rogue ap summary

To display a summary of the rogue access points detected by the Cisco Wireless LAN controller, use the show rogue-ap summary command.

show rogue ap summary

Syntax Description

show

Display settings.

rogue ap

Rogue access point.

summary

Displays a list of all rogue access points.


Examples

> show rogue ap summary
 
   
Rogue Location Discovery Protocol................  Disabled
Rogue ap timeout.................................  1200
 
   
MAC Address        Classification     # APs # Clients Last Heard
-----------------  ------------------ ----- --------- -----------------------
xx:xx:xx:xx:xx:xx  friendly           1     0         Thu Aug  4 18:57:11 2005
xx:xx:xx:xx:xx:xx  malicious          1     0         Thu Aug  4 19:00:11 2005
xx:xx:xx:xx:xx:xx  malicious          1     0         Thu Aug  4 18:57:11 2005
xx:xx:xx:xx:xx:xx  malicious          1     0         Thu Aug  4 18:57:11 2005

Related Commands

config rogue ap classify
config rogue ap friendly
config rogue ap rldp
config rogue ap ssid
config rogue ap timeout
config rogue ap valid-client
config rogue rule
show rogue ap clients
show rogue ap detailed
show rogue ap friendly summary
show rogue ap malicious summary
show rogue ap unclassified summary

show rogue ap friendly summary

To view a list of the friendly rogue access points detected by the controller, use the show rogue-ap friendly summary command.

show rogue ap friendly summary

Syntax Description

show

Display settings.

rogue ap

Rogue access point.

friendly

Friendly rogue access points

summary

Displays a list of all rogue access points.


Examples

> show rogue ap friendly summary
 
   
Number of APs.................................... 1
MAC Address 					State 				# APs	 # Clients Last Heard
----------------- ------------------ ----- --------- ---------------------------
XX:XX:XX:XX:XX:XX Internal 										1		 0 	Tue Nov 27 13:52:04 2007
 
   

Related Commands

config rogue ap classify
config rogue ap friendly
config rogue ap rldp
config rogue ap ssid
config rogue ap timeout
config rogue ap valid-client
config rogue rule
config trapflags rogueap
show rogue ap clients
show rogue ap detailed
show rogue ap summary
show rogue ap malicious summary
show rogue ap unclassified summary

show rogue ap malicious summary

To view a list of the malicious rogue access points detected by the controller, use the show rogue-ap malicious summary command.

show rogue ap malicious summary

Syntax Description

show

Display settings.

rogue ap

Rogue access point.

malicious

Malicious rogue access points

summary

Displays a list of all rogue access points.


Examples

> show rogue ap malicious summary
 
   
Number of APs.................................... 2
MAC Address 					State 				# APs	 # Clients Last Heard
----------------- ------------------ ----- --------- ---------------------------
XX:XX:XX:XX:XX:XX Alert 										1		 0 	Tue Nov 27 13:52:04 2007
XX:XX:XX:XX:XX:XX Alert 										1		 0 	Tue Nov 27 13:52:04 2007
 
   

Related Commands

config rogue ap classify
config rogue ap friendly
config rogue ap rldp
config rogue ap ssid
config rogue ap timeout
config rogue ap valid-client
config rogue rule
config trapflags rogueap
show rogue ap clients
show rogue ap detailed
show rogue ap summary
show rogue ap friendly summary
show rogue ap unclassified summary

show rogue ap unclassified summary

To view a list of the unclassified rogue access points detected by the controller, use the show rogue-ap unclassified summary command.

show rogue ap unclassified summary

Syntax Description

show

Display settings.

rogue ap

Rogue access point.

unclassified

Unclassified rogue access points

summary

Displays a list of all rogue access points.


Examples

> show rogue ap unclassified summary
 
   
Number of APs.................................... 164
MAC Address 				State 					# APs # Clients Last Heard
----------------- ------------------ ----- --------- -----------------------
XX:XX:XX:XX:XX:XX Alert 									1 		0 		Fri Nov 30 11:12:52 2007
XX:XX:XX:XX:XX:XX Alert 									1 		0 		Fri Nov 30 11:29:01 2007
XX:XX:XX:XX:XX:XX Alert 									1 		0 		Fri Nov 30 11:26:23 2007
XX:XX:XX:XX:XX:XX Alert 									1 		0 		Fri Nov 30 11:26:23 2007
 
   
 
   

Related Commands

config rogue ap classify
config rogue ap friendly
config rogue ap rldp
config rogue ap ssid
config rogue ap timeout
config rogue ap valid-client
config rogue rule
config trapflags rogueap
show rogue ap clients
show rogue ap detailed
show rogue ap summary
show rogue ap friendly summary
show rogue ap malicious summary

show rogue client detailed

To show details of a rogue client detected by a Cisco Wireless LAN controller, use the show rogue client detailed command.

show rogue client detailed MAC

Syntax Description

show

Display settings.

rogue client

Rogue client.

detailed

Provide detailed information for a rogue client.

MAC

Rogue client MAC address.


Examples

> show rogue client detailed xx:xx:xx:xx:xx:xx
 
   
Rogue BSSID...................................... 00:0b:85:23:ea:d1
State............................................ Alert
First Time Rogue was Reported.................... Mon Dec 3 21:50:36 2007
Last Time Rogue was Reported..................... Mon Dec 3 21:50:36 2007
Rogue Client IP address.......................... Not known
Reported By
AP 1
MAC Address.............................. 00:15:c7:82:b6:b0
Name..................................... AP0016.47b2.31ea
Radio Type............................... 802.11a
RSSI..................................... -71 dBm
SNR...................................... 23 dB
Channel.................................. 149
Last reported by this AP.............. Mon Dec 3 21:50:36 2007
 
   

Related Commands

show rogue client summary
show rogue ignore-list
config rogue client
config rogue rule

show rogue client summary

To display a summary of the rogue clients detected by the Cisco Wireless LAN controller, use the show rogue client summary command.

show rogue client summary

Syntax Description

show

Display settings.

rogue client

Rogue client.

summary

Displays a list of all rogue clients.


Examples

> show rogue client summary
 
   
MAC Address        State              # APs Last Heard
-----------------  ------------------ ----- -----------------------
xx:xx:xx:xx:xx:xx  Alert              1     Thu Aug  4 19:00:08 2005
xx:xx:xx:xx:xx:xx  Alert              1     Thu Aug  4 19:00:08 2005
xx:xx:xx:xx:xx:xx  Alert              1     Thu Aug  4 19:00:08 2005
xx:xx:xx:xx:xx:xx  Alert              1     Thu Aug  4 19:00:08 2005
xx:xx:xx:xx:xx:xx  Alert              1     Thu Aug  4 19:00:08 2005
xx:xx:xx:xx:xx:xx  Alert              1     Thu Aug  4 19:00:08 2005
xx:xx:xx:xx:xx:xx  Alert              1     Thu Aug  4 19:09:11 2005
xx:xx:xx:xx:xx:xx  Alert              1     Thu Aug  4 19:03:11 2005
xx:xx:xx:xx:xx:xx  Alert              1     Thu Aug  4 19:03:11 2005
xx:xx:xx:xx:xx:xx  Alert              1     Thu Aug  4 19:09:11 2005
xx:xx:xx:xx:xx:xx  Alert              1     Thu Aug  4 18:57:08 2005
xx:xx:xx:xx:xx:xx  Alert              1     Thu Aug  4 19:12:08 2005

Related Commands

show rogue client detailed
show rogue ignore-list
config rogue client
config rogue rule

show rogue ignore-list

To view a list of rogue access points that are configured to be ignored, use the show rogue ignore-list command.

show rogue ignore-list

Syntax Description

show

Display settings.

rogue ignore-list

Rogue access points that are configured to be ignored.

summary

Displays a list of all rogue clients.


Examples

> show rogue client summary
 
   
MAC Address       
-----------------  
xx:xx:xx:xx:xx:xx

Related Commands

config rogue adhoc
config rogue ap classify
config rogue ap friendly
config rogue ap rldp
config rogue ap ssid
config rogue ap timeout
config rogue ap valid-client
config rogue client
config rogue rule
config trapflags rogueap
show rogue ap clients
show rogue ap detailed
show rogue ap summary
show rogue ap friendly summary
show rogue ap malicious summary
show rogue ap unclassified summary
show rogue client detailed
show rogue client summary
show rogue ignore-list
show rogue rule detailed
show rogue rule summary

show rogue rule detailed

To view detailed information for a specific rogue classification rule, use the show rogue rule detailed command.

show rogue rule detailed rule_name

Syntax Description

show

Display settings.

rogue rule

Rogue rules.

detailed

Shows detailed information on a specific rogue classification rule.

rule_name

Rogue rule name.


Examples

> show rogue rule detailed Rule2
 
   
Priority......................................... 2
Rule Name........................................ Rule2
State............................................ Enabled
Type............................................. Malicious
Match Operation.................................. Any
Hit Count........................................ 352
Total Conditions................................. 2
Condition 1
    type......................................... Client-count
    value........................................ 10
Condition 2
    type......................................... Duration
    value (seconds).............................. 2000
Condition 3
    type......................................... Managed-ssid
    value........................................ Enabled
Condition 4
    type......................................... No-encryption
    value........................................ Enabled
Condition 5
    type......................................... Rssi
    value (dBm).................................. -50
Condition 6
    type......................................... Ssid
    SSID Count................................... 1
    SSID 1.................................... test

Related Commands

config rogue rule
show rogue ignore-list
show rogue rule summary

show rogue rule summary

To view the rogue classification rules that are configured on the controller, use the show rogue rule summary command.

show rogue rule summary

Syntax Description

show

Display settings.

rogue rule

Rogue rules.

summary

Displays a list of all rogue rules that are configured on the controller


Examples

> show rogue rule summary
 
   
Priority Rule Name               State    Type          Match Hit Count
-------- ----------------------- -------- ------------- ----- ---------
1        mtest                   Enabled  Malicious     All   0
2        asdfasdf                Enabled  Malicious     All   0

Related Commands

config rogue rule
show rogue ignore-list
show rogue rule detailed

show route summary

To show the routes assigned to the Cisco Wireless LAN controller service port, use the show route summary command.

show route summary

Syntax Description

show route

Command action.

summary

Displays all the configured routes.


Examples

> show route summary
 
   
Number of Routes............................... 1
 
   
Destination Network          Genmask               Gateway
-------------------    -------------------   -------------------
xxx.xxx.xxx.xxx        255.255.255.0         xxx.xxx.xxx.xxx

Related Commands

config route

show rules

To show the active internal firewall rules, use the show rules command.

show rules

Syntax Description

show rules

Displays active internal firewall rules.


Examples

> show rules
 
   
--------------------------------------------------------
Rule ID.............: 3
Ref count...........: 0
Precedence..........: 99999999
Flags...............: 00000001 ( PASS )
Source IP range:
        (Local stack)
Destination IP range:
        (Local stack)
--------------------------------------------------------
Rule ID.............: 25
Ref count...........: 0
Precedence..........: 99999999
Flags...............: 00000001 ( PASS )
Service Info
        Service name........: GDB
        Protocol............: 6
        Source port low.....: 0
        Source port high....: 0
        Dest port low.......: 1000
        Dest port high......: 1000
Source IP range:
IP High............: 0.0.0.0
        Interface..........: ANY
Destination IP range:
        (Local stack)
--------------------------------------------------------
...

Related Commands

None.

show run-config

To show a comprehensive view of the current Cisco Wireless LAN controller configuration, use the show run-config command.

show run-config [no ap | commands]

Syntax Description

show

Display settings.

run-config

Show all controller configuration settings.

no-ap

(Optional) Exclude access point configuration settings.

commands

(Optional) Display a list of user-configured commands on the controller.


Usage Guidelines


Note These commands have replaced the show running-config command.


Some WLAN controllers may have no Crypto Accelerator (VPN Termination Module) or Power Supplies listed because they have no provisions for VPN Termination Modules or Power Supplies.

The show run-config commands command show only values configured by the user. It does not show system-configured default values.

Examples

> show run-config