Cisco AireOS to Cisco IOS XE Command Mapping Reference, Cisco IOS XE Release 3SE
Cisco AireOS to Cisco IOS XE Show commands
Downloads: This chapterpdf (PDF - 1.22MB) The complete bookPDF (PDF - 2.5MB) | Feedback

Cisco AireOS to Cisco IOS XE Show commands

Cisco AireOS to Cisco IOS XE Show commands

Show Wireless Clients Commands

Show Wireless Clients Commands

The following table lists the mapping commands used between the Cisco AireOS and Cisco IOS XE release for wireless clients associated to access points or controller:

Cisco AireOS Command Cisco IOS XE Release Command
show client ap {802.11a | 802.11b} all show wireless client ap dot11 {24ghz | 5ghz}
show client ap {802.11a | 802.11b} Cisco AP show wireless client ap name ap-name dot11 {24ghz | 5ghz}
show client calls {active | rejected} show wireless client calls {active | rejected}
show client calls {active | rejected} {802.11a | 802.11b} show wireless client dot11 {24ghz | 5ghz} calls {active | rejected}
show client location-calibration summary show wireless client location-calibration
show call-control call-info client-mac show wireless client mac-address mac-address call-control call-info
show client ccx {client-capability | frame-data | last-response-status | last-test-status | log-response roam | log-response rsna | log-response syslog | manufacturer-info | operating-parameters | profiles | results} MAC addr | stats-report show wireless client mac-address mac-address ccx {client-capability | frame-data | last-response-status | last-test-status | log-response roam | log-response rsna | log-response syslog | manufacturer-info | operating-parameters | profiles | results | stats-report}
show client ccx rm MAC addr {report beacon | report chan-load | report beacon frame | report beacon noise-hist | report beacon pathloss | status} show wireless client mac-address mac-address ccx rm {report beacon | report chan-load | report frame | report noise-hist | report pathloss | status}
show client roam-history client-mac show wireless client mac-address mac-address roam-history
show client tclas {all | client-mac} show wireless client mac-address mac-address tclas
show client {probing | summary | tclas | advanced timers | username name} show wireless client {probing | summary | tclas | timers | username name}
show client voice diag {qos-map | roam-history | rssi | status | tspec} show wireless client voice diagnostics {qos-map | roam-history | rssi | status | tspec}

Show Access Point Commands

The following table lists the mapping commands used between the Cisco AireOS and Cisco IOS XE release for access points:

Cisco AireOS Command Cisco IOS XE Release Command
show ap auth-list show ap auth-list
show ap auto-rf dot11 {802.11a | 802.11b Cisco AP} show ap name ap-name auto-rf dot11 {24ghz | 5ghz}
show cac voice summary show ap cac voice

show ap name ap-name cac voice

show advanced backup controller show ap capwap summary
show advanced timers show ap capwap timers
show ap rm AP namestatus show ap name ap-name ccx rm status
show ap cdp all show ap cdp
show ap cdp neighbors all show ap cdp neighbors
show ap cdp neighbors detail all show ap cdp neighbors detail
show ap cdp Cisco AP show ap name ap-name cdp
show ap cdp neighbors Cisco AP show ap name ap-name cdp neighbors
show ap cdp neighbors detail Cisco AP show ap name ap-name cdp neighbors detail
show ap channel Cisco AP show ap name ap-name channel
show ap config {ethernet | general | slot slot-id } Cisco AP show ap name ap-name config {ethernet | general | slot slot-id }
show ap crash-file show ap crash-file
show ap core-dump Cisco AP show ap name ap-name core-dump
show ap join stats {detailed | summary} Cisco AP Mac show ap mac-address mac-address join stats {detailed | summary}

show ap join stats summary

show ap monitor-mode summary show ap monitor-mode summary
show ap stats ethernet show ap name ap-name ethernet statistics
show ap eventlog Cisco AP show ap name ap-name eventlog
show ap inventory Cisco AP show ap name ap-name inventory
show ap slots show ap slots
show ap summary show ap summary
show ap uptime show ap uptime

The following table lists the mapping command used between the Cisco AireOS and Cisco IOS XE release for country code and channels configured on the controller:

Cisco AireOS Command Cisco IOS XE Release Command
show country {channels | configured | supported | supported tx-power show wireless country {channels | configured | supported | supported tx-power

The following table lists the mapping command used between the Cisco AireOS and Cisco IOS XE release for rogue access points:

Cisco AireOS Command Cisco IOS XE Release Command
show wps ap-authentication summary show wireless wps ap-authentication summary
show wps cids-sensor {detail index | summary} show wireless wps cids-sensor {index | summary}
show wps mfp {statistics | summary} show wireless wps mfp {statistics | summary}
show rogue adhoc {detailed rogue-mac-addr | summary} show wireless wps rogue adhoc {detailed mac-addr | summary}
show rogue ap {clients mac-addr | detailed mac-addr | friendly summary | malicious summary | rldp summary | summary | unclassified summary} show wireless wps rogue ap {clients mac-addr | detailed mac-addr | friendly summary | malicious summary | rldp summary | summary | unclassified summary}
show rogue auto-contain show wireless wps rogue auto-contain
show rogue client {detailed mac-addr | summary} show wireless wps rogue client {detailed mac-addr | summary}
show rogue ignore-list show wireless wps rogue ignore-list
show rogue rule {detailed rule-name | summary} show wireless wps rogue rule {detailed rule-name | summary}
show wps shun-list show wireless wps shun-list
show wps summary show wireless wps summary
show wps wips { statistics | summary} show wireless wps wips { statistics | summary}

Show Access Point Radios Commands

Show AP Radios Commands

The following table lists the mapping commands used between the Cisco AireOS and Cisco IOS XE release for access point radios:

Cisco AireOS Command Cisco IOS XE Release Command
show advanced {802.11a | 802.11b} ccx global show ap dot11 {24ghz | 5ghz} ccx
show advanced {802.11a | 802.11b} ccx ap AP name show ap name ap-name dot11 {24ghz | 5ghz} ccx
show advanced {802.11a | 802.11b} channel show ap dot11 {24ghz | 5ghz} channel
show advanced {802.11a | 802.11b} coverage show ap dot11 {24ghz | 5ghz} coverage
show ap config {802.11a | 802.11b | 802.11-a49 | 802.11a-58} Cisco AP show ap name ap-name config dot11 {24ghz | 5ghz | 49ghz | 58ghz}
show call-control ap {802.11a | 802.11b } AP name {call-info | metrics} show ap name ap-name dot11 {24ghz | 5ghz} call-control {call-info | metrics}
   
   
show advanced {802.11a | 802.11b} group show ap dot11 {24ghz | 5ghz} group
show {802.11a | 802.11b} l2roam rf-param show ap dot11 {24ghz | 5ghz} l2roam rf-param
show {802.11a | 802.11b} l2roam statistics show ap dot11 {24ghz | 5ghz} l2roam statistics
show {802.11a | 802.11b} l2roam statistics mac-address show ap dot11 {24ghz | 5ghz} l2roam mac-address mac-address statistics
show advanced {802.11a | 802.11b} logging show ap dot11 {24ghz | 5ghz} logging
show {802.11a | 802.11b} media-stream rrc show ap dot11 {24ghz | 5ghz} media-stream rrc
show advanced {802.11a | 802.11b} monitor show ap dot11 {24ghz | 5ghz} monitor
show {802.11a | 802.11b} show ap dot11 {24ghz | 5ghz} network
show advanced {802.11a | 802.11b} profile Cisco AP show ap name ap-name dot11 {24ghz | 5ghz} profile
show advanced {802.11a | 802.11b} receiver show ap dot11 {24ghz | 5ghz} receiver
show ap stats {802.11a | 802.11b} AP name show ap name ap-name dot11 {24ghz | 5ghz} stats
show advanced {802.11a | 802.11b} summary show ap dot11 {24ghz | 5ghz} summary
show client tsm {802.11a | 802.11b} client-mac {ap-mac | all} show ap dot11 {24ghz | 5ghz} tsm {client-mac | all}
show advanced {802.11a | 802.11b} txpower show ap dot11 {24ghz | 5ghz} txpower
show ap wlan {802.11a | 802.11b} Cisco AP show ap name ap-name wlan dot11 {24ghz | 5ghz}

Show AVC Commands and NetFlow

The following table lists the mapping commands used between the Cisco AireOS and Cisco IOS XE release for Application Visibility and Control (AVC) and NetFlow:

Cisco AireOS Command Cisco IOS XE Release Command
show avc statistics client client_MAC {application application_name | top-apps [upstream | downstream]} show avc client client_MAC top number application [aggregate | upstream | downstream]
show avc statistics wlan wlan_id {application application_name | top-apps-groups [upstream | downstream] | top-apps [upstream | downstream]} show avc wlan ssid top number application [aggregate | upstream | downstream]
show flow monitor summary show flow monitor
show flow exporter statistics show flow exporter statistics

Show Cisco CleanAir Commands

Show Cisco CleanAir Commands

The following table lists the mapping commands used between the Cisco AireOS and Cisco IOS XE release for Clean Air:

Cisco AireOS Command Cisco IOS XE Release Command
show {802.11a | 802.11b} cleanair air-quality {summary | worst} show ap dot11 {24ghz | 5ghz} cleanair air-quality {summary | worst}
show {802.11a | 802.11b} cleanair {air-quality | device} Cisco AP show ap name ap-namedot11 {24ghz | 5ghz} cleanair {air-quality | device}
show {802.11a | 802.11b} cleanair config show ap dot11 {24ghz | 5ghz} cleanair config
show 802.11 a cleanair device type {all |canopy | cont-tx | dect-like | inv | jammer |nonstd | persistent |superag | tdd-tx | video | wimax-fixed | wimax-mobile } show ap dot11 5ghz cleanair device type {all |canopy | cont-tx | dect-like | inv | jammer |nonstd | persistent |superag | tdd-tx | video | wimax-fixed | wimax-mobile }
show 802.11 b cleanair device type {all | bt-discovery | bt-link | canopy | cont-tx | dect-like | fh | inv | jammer | mw-oven | nonstd | persistent |superag | tdd-tx | video | wimax-fixed | wimax-mobile | xbox |zigbee} show ap dot11 24ghz cleanair device type {all | bt-discovery | bt-link | canopy | cont-tx | dect-like | fh | inv | jammer | mw-oven | nonstd | persistent |superag | tdd-tx | video | wimax-fixed | wimax-mobile | xbox |zigbee}

Show IPv6 Commands

The following table lists the mapping commands used between the Cisco AireOS and Cisco IOS XE release for IPv6:

Cisco AireOS Command Cisco IOS XE Release Command
show ipv6 acl detailed ipv6_acl_name show ipv6 access-list ipv6_acl_name
show ipv6 neighbor-binding detailed show ipv6 neighbors binding details
show ipv6 neighbor-binding ra-throttle statistics vlan_id show ipv6 nd ra-throttler vlan vlan_id

Show Location Commands

The following table lists the mapping commands used between the Cisco AireOS and Cisco IOS XE release for location settings:

Cisco AireOS Command Cisco IOS XE Release Command
show location ap-detect {all | client | rfid | rogue-ap | rogue-client } ap-name show location ap-detect {all | client | rfid | rogue-ap | rogue-client } ap-name
show location detail mac-addr show location detail mac-addr
show location plm show location plm
show location rfid {client | config | detail mac-addr | summary } show location rfid {client | config | detail mac-addr | summary }
show location statistics rfid show location statistics rfid
show location summary show location summary

Show Multicast Commands

Show Multicast Commands

The following table lists the mapping commands used between the Cisco AireOS and Cisco IOS XE release for multicast mode and groups:

Cisco AireOS Command Cisco IOS XE Release Command
Show network summary show wireless multicast
show network multicast mgid summary show wireless multicast group summary
show network multicast mgid summary show ip igmp snooping wireless mgid

Show NMSP Commands

The following table lists the mapping commands used between the Cisco AireOS and Cisco IOS XE release for Network Mobility Services Protocol (NMSP):

Cisco AireOS Command Cisco IOS XE Release Command
show nmsp capability show nmsp capability
show nmsp notification interval show nmsp notification interval
show nmsp statistics {connection all | summary} show nmsp statistics {connection | summary}
show nmsp status show nmsp status
show nmsp subscription {detail ip-addr | detail | summary} show nmsp subscription {detail ip-addr | detail | summary}

Show VideoStream Commands

Show VideoStream Commands

The following table lists the mapping commands used between the Cisco AireOS and Cisco IOS XE release for VideoStreams:

Cisco AireOS Command Cisco IOS XE Release Command
show media-stream client{detail | summary} show wireless media-stream client{detail groupname | summary}
show media-stream group{detail | summary} show wireless media-stream group{detail groupname | summary}
show media-stream message details show wireless media-stream message details
show media-stream multicast-direct state show wireless media-stream multicast-direct state

Show Workgroup Bridge Commands

Show Workgroup Bridge Commands

The following table lists the mapping commands used between the Cisco AireOS and Cisco IOS XE release for Workgroup Bridge (WGB):

Cisco AireOS Command Cisco IOS XE Release Command
show wgb detail MAC addr show wireless wgb mac-address mac-address detail
show wgb summary show wireless wgb summary

Show Wireless Commands

Show Wireless Commands

The following table lists the mapping commands used between the Cisco AireOS and Cisco IOS XE release for access points:

Cisco AireOS Command Cisco IOS XE Release Command
show band-select show wireless band-select
show advanced dot11-padding show wireless dot11-padding
show 802.11h show wireless dot11h
show dtls connections show wireless dtls connections
show exclusionlist show wireless exclusionlist
show interface summary show wireless interface summary
show linktest show wireless linktest config
show linktest show wireless linktest statistic
show load-balancing show wireless load-balancing
show pmk-cache show wireless pmk-cache
show pmk-cache mac-addr show wireless pmk-cache mac-address mac-addr
show advanced probe show wireless probe
show advanced sip-preferred-call-no show wireless sip preferred-call-no

Show Wireless Mobility Commands

The following table lists the mapping commands used between the Cisco AireOS and Cisco IOS XE release for mobility settings:

Cisco AireOS Command Cisco IOS XE Release Command
show mobility ap-list show wireless mobility ap-list
show mobility controller client summary show wireless mobility controller client summary
show mobility dtls show wireless mobility dtls connections
show mobility statistics show wireless mobility statistics
show mobility summary show wireless mobility summary
show mobility oracle client summary show wireless mobility oracle client summary
show mobility oracle client detail mac-addr show wireless mobility oracle client detail mac-addr
show mobility oracle summary show wireless mobility oracle summary

Show WLAN and Guest LAN Commands

Show WLAN Commands

The following table lists the mapping commands used between the Cisco AireOS and Cisco IOS XE release for WLAN:

Cisco AireOS Command Cisco IOS XE Release Command
show wlan summary show wlan summary
show wlan wlan-id show wlan id wlan-id

Show Guest LAN Commands

The following table lists the mapping commands used between the Cisco AireOS and Cisco IOS XE release for guest access:

Cisco AireOS Command Cisco IOS XE Release Command
show guest-lan guest-lan-id show guest-lan guest-lan-id
show guest-lan summary show guest-lan summary