Cisco Wireless LAN Controller Command Reference, Release 5.1
Controller Commands
Downloads: This chapterpdf (PDF - 4.95MB) The complete bookPDF (PDF - 5.01MB) | Feedback

Cisco Wireless LAN Controller Commands

Table Of Contents

Cisco Wireless LAN Controller Commands

Using the ? command

Using the Help Command

Show Commands for Viewing Configuration

Show 802.11x Commands

show 802.11a

show 802.11a l2roam

show 802.11b

show 802.11b l2roam

show 802.11h

show aaa auth

show acl

show acl cpu

Show Advanced 802.11a Commands

show advanced 802.11a channel

show advanced 802.11a coverage

show advanced 802.11a group

show advanced 802.11a logging

show advanced 802.11a monitor

show advanced 802.11a profile

show advanced 802.11a receiver

show advanced 802.11a summary

show advanced 802.11a txpower

Show Advanced 802.11b Commands

show advanced 802.11b channel

show advanced 802.11b coverage

show advanced 802.11b group

show advanced 802.11b logging

show advanced 802.11b monitor

show advanced 802.11b profile

show advanced 802.11b receiver

show advanced 802.11b summary

show advanced 802.11b txpower

show advanced backup-controller

Other Show Advanced Commands

show advanced client-handoff

show advanced eap

show advanced max-1x-sessions

show advanced probe-limit

show advanced rate

show advanced send-disassoc-on-handoff

show advanced statistics

show advanced timers

Show AP Commands

show ap auto-rf

show ap ccx rm

show ap cdp neighbors detail

show ap config

show ap config global

show ap core-dump

show ap crash-file

show ap eventlog

show ap inventory

show ap join stats detailed

show ap join stats summary

show ap join stats summary all

show ap stats

show ap summary

show ap wlan

show arp switch

show auth-list

show boot

Show Certificate Commands

show certificate compatibility

show certificate summary

Show Client Commands

show client ap

show client ccx client-capability

show client ccx frame-data

show client ccx last-response-status

show client ccx last-test-status

show client ccx log-response

show client ccx manufacturer-info

show client ccx operating-parameters

show client ccx profiles

show client ccx results

show client ccx rm

show client ccx stats-report

show client detail

show client location-calibration summary

show client report

show client summary

show client summary guest-lan

show client username

show country

show country channels

show country supported

show cpu

show custom-web

show database summary

show debug

show dhcp

show dhcp proxy

show eventlog

show exclusionlist

show guest-lan

show hreap group detail

show hreap group summary

show ike

show interface

show inventory

show ipsec

show known ap

show l2tp

show lag summary

show ldap

show ldap statistics

show ldap summary

show load-balancing

show local-auth certificates

show local-auth config

show local-auth statistics

show location

show location statistics rfid

show logging

show loginsession

show lwapp reap association

show lwapp reap status

show macfilter

show mgmtuser

Show Mobility Commands

show mobility anchor

show mobility anchor {wlan | guest-lan}

show mobility statistics

show mobility summary

show msglog

show nac statistics

show nac summary

show netuser

show netuser guest-roles

show network summary

show network multicast mgid detail

show network multicast mgid summary

show nmsp notify-interval summary

show nmsp statistics

show nmsp status

show pmk-cache

show port

show qos queue_length all

Show Radius Commands

show radius acct statistics

show radius auth statistics

show radius rfc3576 statistics

show radius summary

Show RFID Commands

show rfid client

show rfid config

show rfid detail

show rfid summary

Show Rogue Adhoc Commands

show rogue adhoc detailed

show rogue adhoc summary

Show Rogue AP Commands

show rogue ap clients

show rogue ap detailed

show rogue ap summary

show rogue ap friendly summary

show rogue ap malicious summary

show rogue ap unclassified summary

Show Rogue Client Commands

show rogue client detailed

show rogue client summary

show rogue ignore-list

Show Rogue Rule Commands

show rogue rule detailed

show rogue rule summary

show route summary

show rules

show run-config

show serial

show sessions

show services mobility

show snmpcommunity

show snmptrap

show snmpv3user

show snmpversion

show spanningtree port

show spanningtree switch

Show Statistics Commands

show stats port

show stats switch

show switchconfig

show sysinfo

show tacacs acct statistics

show tacacs athr statistics

show tacacs auth statistics

show tacacs summary

show tech-support

show time

show trapflags

show traplog

show version

show watchlist

show wlan

Show WPS Commands

show wps

show wps ap-authentication

show wps cids-sensor detail

show wps cids-sensor summary

show wps mfp

show wps shun-list

show wps signature events {standard | custom}

show wps signature events summary

show wps signature summary

show wps summary

Configuring Controller Settings

Config 802.11x Commands

config {802.11a | 802.11b} 11nsupport

config {802.11a | 802.11b} 11nsupport a-mpdu tx priority

config {802.11a | 802.11b} 11nsupport antenna

config {802.11a | 802.11b} 11nsupport mcs tx

config {802.11a | 802.11b} cac video acm

config {802.11a | 802.11b} cac video max-bandwidth

config {802.11a | 802.11b} cac video roam-bandwidth

config {802.11a | 802.11b} cac video tspec-inactivity-timeout

config {802.11a | 802.11b} cac voice acm

config {802.11a | 802.11b} cac voice max-bandwidth

config {802.11a | 802.11b} cac voice roam-bandwidth

config {802.11a | 802.11b} cac voice tspec-inactivity-timeout

config {802.11a | 802.11b} cac voice load-based

config {802.11a | 802.11b} cac voice stream-size

config {802.11a | 802.11b} chan_width

config {802.11a | 802.11b} disable

config {802.11a | 802.11b} l2roam rf-params

config {802.11a | 802.11b} picocell

config {802.11a | 802.11b} picocell-V2

Config 802.11a Commands

config 802.11a antenna extAntGain

config 802.11a antenna diversity

config 802.11a antenna mode

config 802.11a antenna selection

config 802.11a beaconperiod

config 802.11a channel

config 802.11a channel ap

config 802.11a/802.11b disable

config 802.11a dtpc

config 802.11a enable

config 802.11a exp-bwreq

config 802.11a fragmentation

config 802.11a pico-cell

config 802.11a rate

config 802.11a txPower

config 802.11a txpower ap

Config 802.11b Commands

config 802.11b 11gSupport

config 802.11b antenna diversity

config 802.11b antenna extAntGain

config 802.11b antenna selection

config 802.11b beaconperiod

config 802.11b channel

config 802.11b disable

config 802.11b dtpc

config 802.11b enable

config 802.11b exp-bwreq

config 802.11b fragmentation

config 802.11b pico-cell

config 802.11b preamble

config 802.11b rate

config 802.11b txPower

config 802.11h channelswitch

config 802.11h powerconstraint

config 802.11h setchannel

config aaa auth

config aaa auth mgmt

config acl apply

config acl counter

config acl create

config acl cpu

config acl delete

config acl rule

Configure Advanced 802.11a Commands

config advanced 802.11a channel dca anchor-time

config advanced 802.11a channel dca chan-width-11n

config advanced 802.11a channel dca interval

config advanced 802.11a channel dca sensitivity

config advanced 802.11a channel foreign

config advanced 802.11a channel load

config advanced 802.11a channel noise

config advanced 802.11a channel update

config advanced 802.11a coverage

config advanced 802.11a coverage exception global

config advanced 802.11a coverage fail-rate

config advanced 802.11a coverage level global

config advanced 802.11a coverage packet-count

config advanced 802.11a coverage rssi-threshold

config advanced 802.11a edca-parameters

config advanced 802.11a factory

config advanced 802.11a group-mode

config advanced 802.11a logging channel

config advanced 802.11a logging coverage

config advanced 802.11a logging foreign

config advanced 802.11a logging load

config advanced 802.11a logging noise

config advanced 802.11a logging performance

config advanced 802.11a logging txpower

config advanced 802.11a monitor channel-list

config advanced 802.11a monitor coverage

config advanced 802.11a monitor load

config advanced 802.11a monitor mode

config advanced 802.11a monitor noise

config advanced 802.11a monitor signal

config advanced 802.11a profile clients

config advanced 802.11a profile customize

config advanced 802.11a profile foreign

config advanced 802.11a profile noise

config advanced 802.11a profile throughput

config advanced 802.11a profile utilization

config advanced 802.11a receiver

config advanced 802.11a receiver pico-cell-V2

config advanced 802.11a receiver pico-cell-V2 send_iapp_req

config advanced 802.11a txpower-update

Configure Advanced 802.11b Commands

config advanced 802.11b 7920VSIEConfig

config advanced 802.11b channel dca anchor-time

config advanced 802.11b channel dca interval

config advanced 802.11b channel dca sensitivity

config advanced 802.11b channel foreign

config advanced 802.11b channel load

config advanced 802.11b channel noise

config advanced 802.11b channel update

config advanced 802.11b coverage

config advanced 802.11b coverage exception global

config advanced 802.11b coverage fail-rate

config advanced 802.11b coverage level global

config advanced 802.11b coverage packet-count

config advanced 802.11b coverage rssi-threshold

config advanced 802.11b edca-parameters

config advanced 802.11b factory

config advanced 802.11b group-mode

config advanced 802.11b logging channel

config advanced 802.11b logging coverage

config advanced 802.11b logging foreign

config advanced 802.11b logging load

config advanced 802.11b logging noise

config advanced 802.11b logging performance

config advanced 802.11b logging txpower

config advanced 802.11b monitor channel-list

config advanced 802.11b monitor coverage

config advanced 802.11b monitor load

config advanced 802.11b monitor mode

config advanced 802.11b monitor noise

config advanced 802.11b monitor signal

config advanced 802.11b profile clients

config advanced 802.11b profile customize

config advanced 802.11b profile foreign

config advanced 802.11b profile noise

config advanced 802.11b profile throughput

config advanced 802.11b profile utilization

config advanced 802.11b receiver

config advanced 802.11b receiver pico-cell-V2

config advanced 802.11b receiver pico-cell-V2 send_iapp_req

config advanced 802.11b txpower-update

config advanced arp

config advanced backup-controller primary

config advanced backup-controller secondary

config advanced client-handoff

config advanced eap

config advanced rate

config advanced statistics

Configure Advanced Timers Commands

config advanced timers ap-discovery-timeout

config advanced timers ap-fast-heartbeat

config advanced timers ap-heartbeat-timeout

config advanced timers ap-primary-discovery-timeout

config advanced timers auth-timeout

config advanced timers eap-timeout

config advanced timers eap-identity-request-delay

Configure Access Point Commands

config ap add

config ap bhmode

config ap bhrate

config ap bridgegroupname

config ap bridging

config ap cdp

config ap core-dump

config ap crash-file clear-all

config ap crash-file delete

config ap crash-file get-crash-file

config ap crash-file get-radio-core-dump

config ap delete

config ap dot1xuser

config ap dot1xuser delete

config ap dot1xuser disable

config ap disable

config ap enable

config ap group-name

config ap h-reap radius auth set

config ap h-reap vlan

config ap h-reap vlan native

config ap h-reap vlan wlan

config ap led-state

config ap link-latency

config ap location

config ap mgmtuser

config ap mgmtuser delete

config ap mode

config ap mode h-reap

config ap name

config ap port

config ap power injector

config ap power pre-standard

config ap primary-base

config ap priority

config ap reporting-period

config ap reset

config ap role

config ap rst-button

config ap secondary-base

config ap sniff 802.11a

config ap sniff 802.11b

config ap static-ip

config ap stats-timer

config ap syslog host global

config ap syslog host specific

config ap {telnet | ssh}

config ap tertiary-base

config ap tftp-downgrade

config ap wlan

config ap username

config auth-list add

config auth-list ap-policy

config auth-list delete

config boot

config cdp timer

config certificate

config certificate generate webadmin

Configure Client Commands

config client ccx clear-reports

config client ccx clear-results

config client ccx default-gw-ping

config client ccx dhcp-test

config client ccx dns-ping

config client ccx dns-resolve

config client ccx get-client-capability

config client ccx get-manufacturer-info

config client ccx get-operating-parameters

config client ccx get-profiles

config client ccx log-request

config client ccx send-message

config client ccx stats-request

config client ccx test-abort

config client ccx test-association

config client ccx test-dot1x

config client ccx test-profile

config client deauthenticate

config client location-calibration

config country

config custom-web ext-webauth-mode

config custom-web ext-webauth-url

config custom-web ext-webserver

config custom-web redirectUrl

config custom-web weblogo

config custom-web webmessage

config custom-web webtitle

config database size

config dhcp

config dhcp proxy

config exclusionlist

Configure Interface Commands

config guest-lan

config guest-lan create

config guest-lan custom-web ext-webauth-url

config guest-lan custom-web global disable

config guest-lan custom-web login_page

config guest-lan custom-web webauth-type

config guest-lan ingress-interface

config guest-lan interface

config guest-lan nac

config guest-lan security

config hreap group (add or delete)

config hreap group (RADIUS server)

config hreap group (ap)

config interface acl

config interface address

config interface ap-manager

config interface create

config interface delete

config interface dhcp

config interface guest-lan

config interface hostname

config interface port

config interface quarantine vlan

config interface vlan

config known ap

config lag

config ldap

config ldap add

config ldap simple-bind

config load-balancing

config local-auth active-timeout

config local-auth eap-profile

config local-auth method fast

config local-auth user-credentials

config location

config location add

config location delete

config location description

config location disable

config location enable

config location interface-mapping

config logging buffered

config logging console

config logging debug

config logging fileinfo

config logging procinfo

config logging traceinfo

config logging syslog host

config logging syslog facility

config logging syslog level

config loginsession close

Configure Macfilter Commands

config macfilter add

config macfilter delete

config macfilter description

config macfilter interface

config macfilter ip-address

config macfilter mac-delimiter

config macfilter radius-compat

config macfilter wlan-id

Configure Management-User Commands

config mgmtuser add

config mgmtuser delete

config mgmtuser description

config mgmtuser password

Configure Mobility Commands

config mobility group anchor

config mobility group anchor add {wlan | guest-lan}

config mobility group anchor delete {wlan | guest-lan}

config mobility group domain

config mobility group keepalive count

config mobility group keepalive interval

config mobility group member

config mobility group multicast-address

config mobility multicast-mode

config mobility secure-mode

config mobility statistics reset

Configure Message Log Level Commands

config msglog level critical

config msglog level error

config msglog level security

config msglog level verbose

config msglog level warning

config nac acl

config nac add

config nac delete

config nac disable

config nac enable

Configure Net User Commands

config netuser add

config netuser delete

config netuser description

config netuser guest-role apply

config netuser guest-role create

config netuser guest-role delete

config netuser guest-role qos data-rate average-data-rate

config netuser guest-role qos data-rate average-realtime-rate

config netuser guest-role qos data-rate burst-data-rate

config netuser guest-role qos data-rate burst-realtime-rate

config netuser maxEapUserLogin

config netuser maxuserLogin

config netuser password

config netuser wlan-id

Configure Network Commands

config network 802.3-bridging

config network allow-old-bridge-aps

config network ap-fallback

config network ap-priority

config network apple-talk

config network arptimeout

config network bridging-shared-secret

config network broadcast

config network fast-ssid-change

config network master-base

config network mgmt-via-wireless

config network multicast global

config network multicast igmp snooping

config network multicast igmp timeout

config network multicast mode multicast

config network multicast mode unicast

config network otap-mode

config network rf-network-name

config network secureweb

config network secureweb cipher-option high

config network ssh

config network telnet

config network usertimeout

config network web-auth-port

config network webmode

config network zero-config

config nmsp notify-interval measurement

config pmk-cache delete

Configure Port Commands

config port adminmode

config port autoneg

config port linktrap

config port multicast appliance

config port physicalmode

config port power

config prompt

config qos average-data-rate

config qos average-realtime-rate

config qos burst-data-rate

config qos burst-realtime-rate

config qos description

config qos max-rf-usage

config qos protocol-type/config qos dot1p-tag

config qos queue_length

Configure Radius Account Commands

config radius acct add

config radius acct delete

config radius acct disable

config radius acct enable

config radius fallback-test

config radius acct network

config radius acct ipsec authentication

config radius acct ipsec disable

config radius acct ipsec enable

config radius acct ipsec encryption

config radius acct ipsec ike

config radius acct retransmit-timeout

Configure RADIUS Authentication Server Commands

config radius auth add

config radius auth delete

config radius auth disable

config radius auth enable

config radius auth ipsec authentication

config radius auth ipsec disable

config radius auth ipsec encryption

config radius auth ipsec ike

config radius auth keywrap

config radius auth management

config radius auth network

config radius auth retransmit-timeout

config radius auth rfc3576

config radius auth server-timeout

config radius aggressive-failover disabled

config radius backward compatibility

config radius callStationIdType

config rfid auto-timeout

config rfid status

config rfid timeout

config rogue adhoc

config rogue ap

config rogue ap classify

config rogue ap rldp

config rogue client

config rogue rule

config route add

config route delete

Configure Serial Commands

config serial baudrate

config serial timeout

config service timestamps

Configure CLI Sessions Commands

config sessions maxsessions

config sessions timeout

Configure SNMP Community Commands

config snmp community accessmode

config snmp community create

config snmp community delete

config snmp community ipaddr

config snmp community mode

config snmp syscontact

config snmp syslocation

Configure SNMP Trap Receiver Commands

config snmp trapreceiver create

config snmp trapreceiver delete

config snmp trapreceiver mode

Configure SNMP V3 User Commands

config snmp v3user create

config snmp v3user delete

config snmp version

Configure Spanning Tree Port Commands

config spanningtree port mode

config spanningtree port pathcost

config spanningtree port priority

Configure Spanning Tree Switch Commands

config spanningtree switch bridgepriority

config spanningtree switch forwarddelay

config spanningtree switch hellotime

config spanningtree switch maxage

config spanningtree switch mode

Configure Switch Configuration Commands

config switchconfig flowcontrol

config switchconfig mode

config switchconfig secret-obfuscation

config sysname

Configure TACACS Commands

config tacacs

config tacacs acct

config tacacs athr

config tacacs auth

config tacacs all

config time manual

config time ntp

config time timezone

config time timezone location

Configure Trap Flag Commands

config trapflags 802.11-Security

config trapflags aaa

config trapflags ap

config trapflags authentication

config trapflags client

config trapflags configsave

config trapflags ipsec

config trapflags linkmode

config trapflags multiusers

config trapflags rogueap

config trapflags rrm-params

config trapflags rrm-profile

config trapflags stpmode

config trapflags wps

Configure Watchlist Commands

config watchlist add

config watchlist delete

config watchlist disable

config watchlist enable

Configure Wireless LAN Commands

config wlan 7920-support

config wlan 802.11e

config wlan aaa-override

config wlan acl

config wlan apgroup nac

config wlan broadcast-ssid

config wlan create

config wlan delete

config wlan dhcp_server

config wlan diag-channel

config wlan disable

config wlan dtim

config wlan enable

config wlan exclusionlist

config {wlan | guest-lan} disable

config {wlan | guest-lan} mobility anchor add

config {wlan | guest-lan} mobility anchor delete

config wlan h-reap local switching

config wlan interface

config wlan IPv6Support

config wlan mac-filtering

config wlan mfp

config wlan mobility

config wlan nac

config wlan peer-blocking

config wlan qos

config wlan radio

config wlan radius_server

Configure Wireless LAN Security Commands

config wlan security 802.1X

config wlan security ckip

config wlan security tkip

config wlan security cond-web-redir

config wlan security splash-page-web-redir

config wlan security ipsec disable

config wlan security ipsec enable

config wlan security ipsec authentication

config wlan security ipsec encryption

config wlan security ipsec config

config wlan security ipsec ike authentication

config wlan security ipsec ike dh-group

config wlan security ipsec ike lifetime

config wlan security ipsec ike phase1

config wlan security ipsec ike contivity

config wlan security passthru

config wlan security static-wep-key authentication

config wlan security static-wep-key disable

config wlan security static-wep-key enable

config wlan security static-wep-key encryption

config wlan security web-auth

config wlan security web-passthrough acl

config wlan security web-passthrough disable

config wlan security web-passthrough email-input

config wlan security web-passthrough enable

config wlan security wpa1 disable

config wlan security wpa1 enable

config wlan security wpa1 pre-shared-key

config wlan security wpa2 disable

config wlan security wpa2 enable

config wlan security wpa2 pre-shared-key

config wlan security wpa2 tkip

config wlan security wpa2 wpa-compat

config wlan timeout

config wlan webauth-exclude

config wlan wmm

Configure WPS Commands

config wps ap-authentication

config wps cids-sensor

config wps mfp

config wps rogue-ap

config wps shun-list

config wps signature

config wps signature frequency

config wps signature interval

config wps signature mac-frequency

config wps signature quiet-time

config wps signature reset

lwapp ap controller ip address

Saving Configurations

save config

Clearing Configurations, Logfiles, and Other Actions

clear acl counters

clear ap-config

clear ap-eventlog

clear arp

clear config

clear ext-webauth-url

clear location rfid

clear location statistics rfid

clear locp statistics

clear lwapp private-config

clear radius acct statistics

clear radius auth statistics

clear redirect-url

clear stats ap wlan

clear stats local-auth

clear stats mobility

clear stats port

clear stats radius

clear stats switch

clear stats tacacs

clear transfer

clear traplog

clear webimage

clear webmessage

clear webtitle

Uploading and Downloading Files and Configurations

transfer download certpassword

transfer download datatype

transfer download filename

transfer download mode

transfer download password

transfer download path

transfer download port

transfer download serverip

transfer download start

transfer download tftpPktTimeout

transfer download tftpMaxRetries

transfer download username

transfer encrypt

transfer upload datatype

transfer upload filename

transfer upload mode

transfer upload pac

transfer upload password

transfer upload path

transfer upload port

transfer upload serverip

transfer upload start

transfer upload username

Troubleshooting Commands

debug aaa

debug aaa local-auth

debug airewave-director

debug ap

debug ap enable

debug arp

debug bcast

debug cac

debug crypto

debug dhcp

debug disable-all

debug dot11

debug dot11 mgmt interface

debug dot11 mgmt msg

debug dot11 mgmt ssid

debug dot11 mgmt state-machine

debug dot11 mgmt station

debug dot1x

debug l2age

debug lwapp

debug lwapp console cli

debug lwapp reap

debug lwapp reap load

debug lwapp reap mgmt

debug mac

debug mobility

debug nac

debug ntp

debug pem

debug pm

debug poe

debug rbcp

debug rfid

debug snmp

debug transfer

debug wcp

debug wps

eping

mping


Cisco Wireless LAN Controller Commands


The Cisco Wireless LAN Solution command line interface (CLI) enables operators to connect an ASCII console to the Cisco Wireless LAN Controller and configure the controller and its associated access points.

This document covers the commands available in the Cisco CLI release 5.0. The controllers currently covered include:

Cisco 2100 and 4400 Series Wireless LAN Controllers

Cisco Wireless Services Modules (WiSM)

Cisco Wireless LAN Controller Network Modules

Catalyst 3750G Integrated Wireless LAN Controller Switches

This chapter contains the following sections:

Using the ? command

Using the Help Command

Show Commands for Viewing Configuration

Configuring Controller Settings

Saving Configurations

Clearing Configurations, Logfiles, and Other Actions

Uploading and Downloading Files and Configurations

Troubleshooting Commands

Using the ? command

To display all of the commands in your current level of the command tree, or to display more information about a particular command, use the ? command.

?

command name ?

When you enter a command information request, put a space between command name and ?.

Examples

The following command shows you all the commands and levels available from the root level.

?
 
   
clear          Clear selected configuration elements.
config         Configure switch options and settings.
debug          Manages system debug options.
help           Help
linktest       Perform a link test to a specified MAC address.
logout         Exit this session. Any unsaved changes are lost.
ping           Send ICMP echo packets to a specified IP address.
reset          Reset options.
save           Save switch configurations.
show           Display switch options and settings.
transfer       Transfer a file to or from the switch.
 
   

The following command shows you that datatype is the only entry at the transfer download level:

> transfer download d?
datatype

The following command shows you the permissible entries for the transfer download datatype command:

> transfer download datatype ?
 
   
config         Download Configuration File.
code           Download an executable image to the system.
image          Download a web page logo to the system.
signature      Download a signature file to the system.
webadmincert   Download a certificate for web administration to the system.
webauthcert    Download a web certificate for web portal to the system.
 
   

Using the Help Command

To look up keyboard commands, use the help command at the root level.

help

Examples

> help
 
   
HELP:
Special keys:
  DEL, BS... delete previous character
  Ctrl-A  .... go to beginning of line
  Ctrl-E  .... go to end of line
  Ctrl-F  .... go forward one character
  Ctrl-B  .... go backward one character
  Ctrl-D  .... delete current character
  Ctrl-U, X. delete to beginning of line
  Ctrl-K  .... delete to end of line
  Ctrl-W  .... delete previous word
  Ctrl-T  .... transpose previous character
  Ctrl-P  .... go to previous line in history buffer
  Ctrl-N  .... go to next line in history buffer
  Ctrl-Z  .... return to root command prompt
  Tab, <SPACE> command-line completion
  Exit    .... go to next lower command prompt
  ?       .... list choices

Show Commands for Viewing Configuration

To view Cisco Wireless LAN controller options and settings, use the show commands.

Show 802.11x Commands

To view show commands for the 802.11a, 802.11b, or other supported 802.11 network, use the show 802.11x commands.

show 802.11a

To display basic 802.11a options and settings, use the show 802.11a command.

show 802.11a

Syntax Description

show

Displays configurations.

802.11a

802.11a configurations.


Defaults

None.

Examples

> 802.11a Network.................................. Enabled
11nSupport....................................... Enabled
      802.11a Low Band........................... Enabled
      802.11a Mid Band........................... Enabled
      802.11a High Band.......................... Enabled
802.11a Operational Rates
    802.11a 6M Rate.............................. Mandatory
    802.11a 9M Rate.............................. Supported
    802.11a 12M Rate............................. Mandatory
    802.11a 18M Rate............................. Supported
    802.11a 24M Rate............................. Mandatory
    802.11a 36M Rate............................. Supported
    802.11a 48M Rate............................. Supported
    802.11a 54M Rate............................. Supported
802.11n MCS Settings:
    MCS 0........................................ Supported
    MCS 1........................................ Supported
    MCS 2........................................ Supported
    MCS 3........................................ Supported
    MCS 4........................................ Supported
    MCS 5........................................ Supported
    MCS 6........................................ Supported
    MCS 7........................................ Supported
    MCS 8........................................ Supported
    MCS 9........................................ Supported
    MCS 10....................................... Supported
    MCS 11....................................... Supported
    MCS 12....................................... Supported
    MCS 13....................................... Supported
    MCS 14....................................... Supported
    MCS 15....................................... Supported
802.11n Status:
    A-MPDU Tx ................................... Enabled
        Priority 0............................... Enabled
        Priority 1............................... Enabled
        Priority 2............................... Enabled
        Priority 3............................... Enabled
        Priority 4............................... Enabled
        Priority 5............................... Disabled
        Priority 6............................... Disabled
        Priority 7............................... Enabled
    A-MSDU Tx ................................... Enabled
    Rifs Tx ..................................... Enabled
    Guard Interval .............................. Short
Beacon Interval.................................. 100
CF Pollable mandatory............................ Disabled
CF Poll Request mandatory........................ Disabled
CFP Period....................................... 4
CFP Maximum Duration............................. 60
Default Channel.................................. 36
Default Tx Power Level........................... 1
DTPC  Status..................................... Enabled
Fragmentation Threshold.......................... 2346
Long Retry Limit................................. 4
Maximum Rx Life Time............................. 512
Max Tx MSDU Life Time............................ 512
Medium Occupancy Limit........................... 100
Pico-Cell Status................................. Disabled
Pico-Cell-V2 Status.............................. Disabled
RTS Threshold.................................... 2347
Short Retry Limit................................ 7
TI Threshold..................................... -50
Traffic Stream Metrics Status.................... Disabled
Expedited BW Request Status...................... Disabled
EDCA profile type................................ default-wmm
Voice MAC optimization status.................... Disabled
Call Admission Control (CAC) configuration
Voice AC - Admission control (ACM)............ Disabled
   Voice max RF bandwidth........................ 75
   Voice reserved roaming bandwidth.............. 6
   Voice load-based CAC mode..................... Disabled
   Voice tspec inactivity timeout................ Disabled
   Video AC - Admission control (ACM)............ Disabled
   Voice Stream-Size............................. 84000
   Voice Max-Streams............................. 2
   Video max RF bandwidth........................ Infinite
   Video reserved roaming bandwidth.............. 0
 
   

Related Commands

show 802.11b

show advanced 802.11a summary

show 802.11a l2roam

To display 802.11a Layer 2 client roaming information, use the show 802.11a l2roam command.

show 802.11a l2roam {rf-param | statistics mac_address}

Syntax Description

show

Displays configurations.

802.11a

802.11a configurations.

l2roam

Layer 2 client roaming configurations.

rf-param

Radio frequency parameters.

statistics

Layer 2 client roaming statistics.

mac_address

The MAC address of the client.


Defaults

None.

Examples

> show 802.11a l2roam rf-param
 
L2Roam 802.11a RF Parameters.....................
    Config Mode.................................. Default
    Minimum RSSI................................. -85
    Roam Hysteresis.............................. 2
    Scan Threshold............................... -72
    Transition time.............................. 5

Related Commands

show 802.11b l2roam

config {802.11a | 802.11b} l2roam rf-params

show 802.11b

To display basic 802.11b/g options and settings, use the show 802.11b command.

show 802.11b

Syntax Description

show

Displays configurations.

802.11b

802.11b/g configurations.


Defaults

None.

Examples

> show 802.11b
> 802.11b Network.................................. Enabled
11nSupport....................................... Enabled
      802.11b Low Band........................... Enabled
      802.11b Mid Band........................... Enabled
      802.11b High Band.......................... Enabled
802.11a Operational Rates
    802.11b 6M Rate.............................. Mandatory
    802.11b 9M Rate.............................. Supported
    802.11b 12M Rate............................. Mandatory
    802.11b 18M Rate............................. Supported
    802.11b 24M Rate............................. Mandatory
    802.11b 36M Rate............................. Supported
    802.11b 48M Rate............................. Supported
    802.11b 54M Rate............................. Supported
802.11n MCS Settings:
    MCS 0........................................ Supported
    MCS 1........................................ Supported
    MCS 2........................................ Supported
    MCS 3........................................ Supported
    MCS 4........................................ Supported
    MCS 5........................................ Supported
MCS 6........................................ Supported
    MCS 7........................................ Supported
    MCS 8........................................ Supported
    MCS 9........................................ Supported
    MCS 10....................................... Supported
    MCS 11....................................... Supported
    MCS 12....................................... Supported
    MCS 13....................................... Supported
    MCS 14....................................... Supported
    MCS 15....................................... Supported
802.11n Status:
    A-MPDU Tx ................................... Enabled
        Priority 0............................... Enabled
        Priority 1............................... Enabled
        Priority 2............................... Enabled
        Priority 3............................... Enabled
        Priority 4............................... Enabled
        Priority 5............................... Disabled
        Priority 6............................... Disabled
        Priority 7............................... Enabled
    A-MSDU Tx ................................... Enabled
    Rifs Tx ..................................... Enabled
    Guard Interval .............................. Short
Beacon Interval.................................. 100
CF Pollable mandatory............................ Disabled
CF Poll Request mandatory........................ Disabled
CFP Period....................................... 4
CFP Maximum Duration............................. 60
Default Channel.................................. 36
Default Tx Power Level........................... 1
DTPC  Status..................................... Enabled
Fragmentation Threshold.......................... 2346
Long Retry Limit................................. 4
Maximum Rx Life Time............................. 512
Max Tx MSDU Life Time............................ 512
Medium Occupancy Limit........................... 100
Pico-Cell Status................................. Disabled
Pico-Cell-V2 Status.............................. Disabled
RTS Threshold.................................... 2347
Short Retry Limit................................ 7
TI Threshold..................................... -50
Traffic Stream Metrics Status.................... Disabled
Expedited BW Request Status...................... Disabled
EDCA profile type................................ default-wmm
Voice MAC optimization status.................... Disabled
Call Admission Control (CAC) configuration
Voice AC - Admission control (ACM)............ Disabled
   Voice max RF bandwidth........................ 75
   Voice reserved roaming bandwidth.............. 6
   Voice load-based CAC mode..................... Disabled
   Voice tspec inactivity timeout................ Disabled
   Video AC - Admission control (ACM)............ Disabled
   Voice Stream-Size............................. 84000
   Voice Max-Streams............................. 2
   Video max RF bandwidth........................ Infinite
   Video reserved roaming bandwidth.............. 0
 
   

Related Commands

show 802.11a

show advanced 802.11b summary

show 802.11b l2roam

To display 802.11b/g Layer 2 client roaming information, use the show 802.11b l2roam command.

show 802.11b l2roam {rf-param | statistics mac_address}

Syntax Description

show

Displays configurations.

802.11b

802.11b/g configurations.

l2roam

Layer 2 client roaming configurations.

rf-param

Radio frequency parameters.

statistics

Layer 2 client roaming statistics.

mac_address

The MAC address of the client.


Defaults

None.

Examples

> show 802.11b l2roam rf-param
 
L2Roam 802.11bg RF Parameters.....................
    Config Mode.................................. Default
    Minimum RSSI................................. -85
    Roam Hysteresis.............................. 2
    Scan Threshold............................... -72
    Transition time.............................. 5

Related Commands

show 802.11a l2roam

config {802.11a | 802.11b} l2roam rf-params

show 802.11h

To display basic 802.11h options and settings, use the show 802.11h command.

show 802.11h

Syntax Description

show

Displays configurations.

802.11h

802.11h configurations.


Defaults

None.

Examples

> show 802.11h
 
   
802.11h ......................................... powerconstraint : 0
802.11h ......................................... channelswitch : Disable
802.11h ......................................... channelswitch mode : 0

Related Commands

show 802.11a

show 802.11b

config 802.11h

show aaa auth

To display the configuration settings for the AAA authentication server database, use the show aaa auth command.

show aaa auth

Syntax Description

This command has no arguments or keywords.

Defaults

This command has no defaults.

Examples

> show aaa auth
 
   
Management authentication server order:
    1............................................ local
    2............................................ tacacs

Related Commands

config aaa auth

show acl

To display the access control lists (ACLs) that are configured on the controller, use the show acl command.

show acl {summary | detailed acl_name}

Syntax Description

show

Displays configurations.

acl

ACL configurations.

summary

Displays a summary of all ACLs configured on the controller.

detailed

Displays detailed information about a specific ACL.

acl_name

The ACL name up to 32 alphanumeric characters.


Defaults

None.

Examples

> show acl summary
 
   
ACL Counter Status         Enabled
-------------------------------------
ACL Name                   Applied
------------------------- -----------
acl1                         Yes
acl2                         Yes
acl3                         Yes
 
   
 
   
> show acl detailed acl_name
          Source             Destination          Source Port Dest Port
I Dir 	IP Address/Netmask IP Address/Netmask Prot    Range 	Range 	 	 	DSCP 	Action Counter
- --- ------------------ ------------------ ---- ----------- -------- ----- ------ -------
1 Any 	0.0.0.0/0.0.0.0 	 	 0.0.0.0/0.0.0.0 	 	 Any 	 	 	 0-65535 		 0-65535 	 0   	 Deny 	 	 	 0
2 In 	 0.0.0.0/0.0.0.0 	 	 200.200.200.0/	 	 	 	 	 6 	 	 	 	 80-80 	 	 	 0-65535  Any 	 Permit 	 0 
						 255.255.255.0
 
   
DenyCounter :     0 


Note The Counter field increments each time a packet matches an ACL rule, and the DenyCounter field increments each time a packet does not match any of the rules.


Related Commands

clear acl counters

config acl counter

config interface acl

show acl cpu

To display the access control lists (ACLs) configured on the central processing unit (CPU), use the show acl cpu command.

show acl cpu

Syntax Description

show

Displays configurations.

acl

ACL configurations.

cpu

Displays a summary of all the ACLs configured on the CPU.


Command Default

None

Examples

> show acl cpu
CPU Acl Name................................
Wireless Traffic............................ Disabled
Wired Traffic............................... Disabled
Applied to NPU.............................. No

Related Commands

config acl cpu

Show Advanced 802.11a Commands

Use the show advanced 802.11a commands to show advanced 802.11a parameters.

show advanced 802.11a channel

To display the automatic channel assignment configuration and statistics, use the show advanced 802.11a channel command.

show advanced 802.11a channel

Syntax Description

show

Displays configurations.

advanced

Advanced parameters.

802.11a

802.11a network.

channel

Channel status.


Defaults

None.

Examples

> show advanced 802.11a channel
 
   
Automatic Channel Assignment
  Channel Assignment Mode........................ ONCE
  Channel Update Interval........................ 600 seconds
  Anchor time (Hour of the day).................. 15
  Channel Update Count........................... 0
  Channel Update Contribution.................... S.IU
  Channel Assignment Leader...................... 00:0b:85:40:90:c0
  Last Run....................................... 501 seconds ago
  DCA Sensitivity Level.......................... MEDIUM (20 dB)
  DCA 802.11n Channel Width...................... 40 MHz
  Channel Energy Levels
    Minimum...................................... -92 dBm
    Average...................................... -92 dBm
    Maximum...................................... -92 dBm
  Channel Dwell Times
    Minimum...................................... 0 days, 00 h 58 m 45 s
    Average...................................... 0 days, 00 h 58 m 45 s
    Maximum...................................... 0 days, 00 h 58 m 45 s
  Auto-RF Allowed Channel List................... 36,40
  Auto-RF Allowed Channel List................... 36,40,44,48,52,56,60,64,100,
    ............................................. 104,108,112,116,132,136,140,
    ............................................. 149,153,157,161,165,190,196
  DCA Outdoor AP option.......................... Disabled

Related Commands DCA Outdoor AP option.......................... Disabled

config 802.11a channel

show advanced 802.11a coverage

To display the configuration and statistics for coverage hole detection, use the show advanced 802.11a coverage command.

show advanced 802.11a coverage

Syntax Description

show

Displays configurations.

advanced

Advanced parameters.

802.11a

802.11a network.

coverage

Coverage hole detection.


Defaults

None.

Examples

> show advanced 802.11a coverage
 
   
Coverage Hole Detection
  802.11a Coverage Hole Detection Mode........... Enabled
  802.11a Coverage Voice Packet Count............ 100 packets
  802.11a Coverage Voice Packet Percentage....... 50%
  802.11a Coverage Voice RSSI Threshold.......... -80 dBm
  802.11a Coverage Data Packet Count............. 50 packets
  802.11a Coverage Data Packet Percentage........ 50%
  802.11a Coverage Data RSSI Threshold........... -80 dBm
  802.11a Global coverage exception level........ 25 %
  802.11a Global client minimum exception lev.... 3 clients

Related Commands

config advanced 802.11a coverage
config advanced 802.11a coverage exception global
config advanced 802.11a coverage fail-rate
config advanced 802.11a coverage level global
config advanced 802.11a coverage packet-count
config advanced 802.11a coverage rssi-threshold

show advanced 802.11a group

To display the advanced 802.11a Cisco radio RF grouping, use the show advanced 802.11a group command.

show advanced 802.11a group

Syntax Description

show

Displays configurations.

advanced

Advanced parameters.

802.11a

802.11a network.

group

RF grouping values.


Defaults

None.

Examples

> show advanced 802.11a group
 
   
Radio RF Grouping
  802.11a Group Mode................................... AUTO
  802.11a Group Update Interval........................ 600 seconds
  802.11a Group Leader................................. xx:xx:xx:xx:xx:xx
    802.11a Group Member............................... xx:xx:xx:xx:xx:xx
  802.11a Last Run..................................... 133 seconds ago

Related Commands

config advanced 802.11a group-mode

show advanced 802.11a logging

To display advanced 802.11a RF event and performance logging, use the show advanced 802.11a logging command.

show advanced 802.11a logging

Syntax Description

show

Displays configurations.

advanced

Advanced parameters.

802.11a

802.11a network.

logging

RF event and performance logging.


Defaults

None.

Examples

> show advanced 802.11a logging
 
   
RF Event and Performance Logging
  Channel Update Logging......................... Off
  Coverage Profile Logging....................... Off
  Foreign Profile Logging........................ Off
  Load Profile Logging........................... Off
  Noise Profile Logging.......................... Off
  Performance Profile Logging.................... Off
  TxPower Update Logging......................... Off

Related Commands

config advanced 802.11a logging channel, config advanced 802.11a logging coverage, config advanced 802.11a logging foreign, config advanced 802.11a logging load, config advanced 802.11a logging noise, config advanced 802.11a logging performance, config advanced 802.11a logging power

show advanced 802.11a monitor

To display the advanced 802.11a default Cisco radio monitoring, use the show advanced 802.11a monitor command.

show advanced 802.11a monitor

Syntax Description

show

Displays configurations.

advanced

Advanced parameters.

802.11a

802.11a network.

monitor

Cisco radio monitoring values.


Defaults

None.

Examples

> show advanced 802.11a monitor
 
   
Default 802.11a AP monitoring
  802.11a Monitor Mode........................... enable
  802.11a Monitor Channels....................... Country channels
  802.11a AP Coverage Interval................... 180 seconds
  802.11a AP Load Interval....................... 60 seconds
  802.11a AP Noise Interval...................... 180 seconds
  802.11a AP Signal Strength Interval............ 60 seconds

Related Commands

config advanced 802.11a monitor coverage

config advanced 802.11a monitor load

config advanced 802.11a monitor noise

config advanced 802.11a monitor signal

show advanced 802.11a profile

To display the advanced 802.11a lightweight access point performance profiles, use the show advanced 802.11a profile command.

show advanced 802.11a profile {global | Cisco_AP}

Syntax Description

show

Displays configurations.

advanced

Advanced parameters.

802.11a

802.11a network.

profile

Cisco radio performance profile.

global

All Cisco lightweight access points.

Cisco_AP

The name of a specific Cisco lightweight access point.


Defaults

None.

Examples

> show advanced 802.11a profile global
 
   
Default 802.11a AP performance profiles
  802.11a Global Interference threshold.............. 10%
  802.11a Global noise threshold..................... -70 dBm
  802.11a Global RF utilization threshold............ 80%
  802.11a Global throughput threshold................ 1000000 bps
  802.11a Global clients threshold................... 12 clients
 
   
> show advanced 802.11a profile AP1
 
   
Cisco AP performance profile not customized
 
   

This response indicates that the performance profile for this lightweight access point is using the global defaults and has not been individually configured.

Related Commands

config advanced 802.11b profile clients

config advanced 802.11b profile customize

config advanced 802.11b profile foreign

config advanced 802.11b profile noise,

config advanced 802.11b profile throughput

config advanced 802.11b profile utilization

show advanced 802.11a receiver

To display the configuration and statistics of the 802.11a receiver, use the show advanced 802.11a receiver command.

show advanced 802.11a receiver

Syntax Description

show

Displays configurations.

advanced

Advanced parameters.

802.11a

802.11a network.

receiver

Receiver.


Defaults

None.

Examples

> show advanced 802.11a receiver
 
   
802.11a Advanced Receiver Settings
  RxStart   : Signal Threshold........................... 15
  RxStart   : Signal Lamp Threshold...................... 5
  RxStart   : Preamble Power Threshold................... 2
  RxReStart : Signal Jump Status......................... Enabled
  RxReStart : Signal Jump Threshold...................... 10
  TxStomp : Low RSSI Status.............................. Enabled
  TxStomp : Low RSSI Threshold........................... 30
  TxStomp : Wrong BSSID Status........................... Enabled
  TxStomp : Wrong BSSID Data Only Status................. Enabled
  RxAbort : Raw Power Drop Status........................ Disabled
  RxAbort : Raw Power Drop Threshold..................... 10
  RxAbort : Low RSSI Status.............................. Disabled
  RxAbort : Low RSSI Threshold........................... 0
  RxAbort : Wrong BSSID Status........................... Disabled
  RxAbort : Wrong BSSID Data Only Status................. Disabled

Related Commands

config advanced 802.11a monitor coverage

config advanced 802.11a monitor load

config advanced 802.11a monitor noise

config advanced 802.11a monitor signal

show advanced 802.11a summary

To display the advanced 802.11a Cisco lightweight access point name, channel, and transmit level summary, use the show advanced 802.11a summary command.

show advanced 802.11a summary

Syntax Description

show

Displays configurations.

advanced

Advanced parameters.

802.11a

802.11a network.

summary

Cisco lightweight access point name, channel, and transmit level summary.


Defaults

None.

Examples

> show advanced 802.11a summary
 
   
AP Name                          Channel     TxPower Level
-------------------------------- ----------- -------------
AP03                                 36*           1*
AP02                                 52            5*
AP01                                 64            5
 
   

Note An asterisk (*) next to a channel number or power level indicates that it is being controlled by the global algorithm settings.


Related Commands

show advanced 802.11b summary

show advanced 802.11a txpower

To view the advanced 802.11a automatic transmit power assignment, use the show advanced 802.11a txpower command.

show advanced 802.11a txpower

Syntax Description

show

Displays configurations.

advanced

Advanced parameters.

802.11a

802.11a network.

txpower

Transmit power.


Defaults

None.

Examples

> show advanced 802.11a txpower
 
   
Automatic Transmit Power Assignment
  Transmit Power Assignment Mode.................. AUTO
  Transmit Power Update Interval.................. 600 seconds
  Transmit Power Threshold........................ -65 dBm
  Transmit Power Neighbor Count................... 3 APs
  Transmit Power Update Contribution.............. SN.
  Transmit Power Assignment Leader................ xx:xx:xx:xx:xx:xx
  Last Run........................................ 384 seconds ago

Related Commands

config advanced 802.11a txpower-update, config 802.11a txPower

Show Advanced 802.11b Commands

Use the show advanced 802.11b commands to show advanced 802.11b parameters.

show advanced 802.11b channel

To display the automatic channel assignment status and statistics, use the show advanced 802.11b channel command.

show advanced 802.11b channel

Syntax Description

show

Displays configurations.

advanced

Advanced parameters.

802.11b

802.11b/g network.

channel

Channel status.


Defaults

None.

Examples

> show advanced 802.11b channel
 
   
Automatic Channel Assignment
  Channel Assignment Mode........................ ONCE
  Channel Update Interval........................ 600 seconds
  Anchor time (Hour of the day).................. 14
  Channel Update Count........................... 0
  Channel Update Contribution.................... S.IU
  Channel Assignment Leader...................... 00:0b:85:40:90:c0
  Last Run....................................... 10 seconds ago
 
   
  DCA Sensitivity Level: ...................... MEDIUM (15 dB)
  Channel Energy Levels
    Minimum...................................... unknown
    Average...................................... unknown
    Maximum...................................... unknown
  Channel Dwell Times
    Minimum...................................... 0 days, 01 h 44 m 25 s
    Average...................................... 0 days, 01 h 45 m 00 s
    Maximum...................................... 0 days, 01 h 45 m 35 s
  Auto-RF Allowed Channel List................... 1,6,11
  Auto-RF Unused Channel List.................... 2,3,4,5,7,8,9,10

Related Commands

config 802.11b channel

show advanced 802.11b coverage

To display the configuration and statistics for coverage hole detection, use the show advanced 802.11b coverage command.

show advanced 802.11b coverage

Syntax Description

show

Displays configurations.

advanced

Advanced parameters.

802.11b

802.11a network.

coverage

Coverage hole detection.


Defaults

None.

Examples

> show advanced 802.11b coverage
 
   
Coverage Hole Detection
  802.11b Coverage Hole Detection Mode........... Enabled
  802.11b Coverage Voice Packet Count............ 100 packets
  802.11b Coverage Voice Packet Percentage....... 50%
  802.11b Coverage Voice RSSI Threshold.......... -80 dBm
  802.11b Coverage Data Packet Count............. 50 packets
  802.11b Coverage Data Packet Percentage........ 50%
  802.11b Coverage Data RSSI Threshold........... -80 dBm
  802.11b Global coverage exception level........ 25 %
  802.11b Global client minimum exception lev.... 3 clients

Related Commands

config advanced 802.11b coverage
config advanced 802.11b coverage exception global
config advanced 802.11b coverage fail-rate
config advanced 802.11b coverage level global
config advanced 802.11b coverage packet-count
config advanced 802.11b coverage rssi-threshold

show advanced 802.11b group

To display the advanced 802.11b/g Cisco radio RF grouping, use the show advanced 802.11b group command.

show advanced 802.11b group

Syntax Description

show

Displays configurations.

advanced

Advanced parameters.

802.11b

802.11b/g network.

group

RF grouping values.


Defaults

None.

Examples

> show advanced 802.11b group
 
   
Radio RF Grouping
   802.11b Group Mode.............................. AUTO
   802.11b Group Update Interval................... 600 seconds
   802.11b Group Leader............................ xx:xx:xx:xx:xx:xx
     802.11b Group Member.......................... xx:xx:xx:xx:xx:xx
   802.11b Last Run................................ 511 seconds ago

Related Commands

config advanced 802.11b group-mode

show advanced 802.11b logging

To display advanced 802.11b/g RF event and performance logging, use the show advanced 802.11b logging command.

show advanced 802.11b logging

Syntax Description

show

Displays configurations.

advanced

Advanced parameters.

802.11b

802.11b network.

logging

RF event and performance logging.


Defaults

None.

Examples

> show advanced 802.11b logging
 
   
RF Event and Performance Logging
   Channel Update Logging........................... Off
   Coverage Profile Logging......................... Off
   Foreign Profile Logging.......................... Off
   Load Profile Logging............................. Off
   Noise Profile Logging............................ Off
   Performance Profile Logging...................... Off
   Transmit Power Update Logging.................... Off

Related Commands

config advanced 802.11b logging channel

config advanced 802.11b logging coverage

config advanced 802.11b logging foreign

config advanced 802.11b logging load

config advanced 802.11b logging noise

config advanced 802.11b logging performance

config advanced 802.11b logging power

show advanced 802.11b monitor

To display the advanced 802.11b/g default Cisco radio monitoring, use the show advanced 802.11b monitor command.

show advanced 802.11b monitor

Syntax Description

show

Displays configurations.

advanced

Advanced parameters.

802.11b

802.11b/g network.

monitor

Cisco radio monitoring values.


Defaults

None.

Examples

> show advanced 802.11b monitor
 
   
Default 802.11b AP monitoring
  802.11b Monitor Mode......................... enable
  802.11b Monitor Channels..................... Country channels
  802.11b AP Coverage Interval................. 180 seconds
  802.11b AP Load Interval..................... 60 seconds
  802.11b AP Noise Interval.................... 180 seconds
  802.11b AP Signal Strength Interval.......... 60 seconds

Related Commands

config advanced 802.11b monitor coverage

config advanced 802.11b monitor load

config advanced 802.11b monitor noise

config advanced 802.11b monitor signal

show advanced 802.11b profile

To display the advanced 802.11b/g Cisco radio performance profiles, use the show advanced 802.11b profile command.

show advanced 802.11b profile {global | Cisco_AP}

Syntax Description

show

Displays configurations.

advanced

Advanced parameters.

802.11b

802.11b/g network.

profile

Cisco lightweight access point performance profile.

global

All Cisco lightweight access points.

Cisco_AP

The name of Cisco lightweight access point.


Defaults

None.

Examples

> show advanced 802.11b profile global
 
   
Default 802.11b AP performance profiles
   802.11b Global Interference threshold.............. 10%
   802.11b Global noise threshold..................... -70 dBm
   802.11b Global RF utilization threshold............ 80%
   802.11b Global throughput threshold................ 1000000 bps
   802.11b Global clients threshold................... 12 clients
   802.11b Global coverage threshold.................. 12 dB
   802.11b Global coverage exception level............ 80%
   802.11b Global client minimum exception lev........ 3 clients
 
   
> show advanced 802.11b profile AP1
 
   
Cisco AP performance profile not customized
 
   

This response indicates that the performance profile for this Cisco lightweight access point is using the global defaults and has not been individually configured.

Related Commands

config advanced 802.11b profile clients

config advanced 802.11b profile customize

config advanced 802.11b profile foreign

config advanced 802.11b profile noise

config advanced 802.11b profile throughput

config advanced 802.11b profile utilization

show advanced 802.11b receiver

To display the advanced 802.11b/g default Cisco radio receiver parameters, use the show advanced 802.11b receiver command.

show advanced 802.11b receiver

Syntax Description

show

Displays configurations.

advanced

Advanced parameters.

802.11b

802.11b/g network.

receiver

Cisco radio receiver values.


Defaults

None.

Examples

> show advanced 802.11b receiver
 
   
Default 802.11b Receiver Settings
  RxStart    :  Signal Threshold............... 15
  RxStart    :  Signal Jump Threshold.......... 5
  RxStart    :  Preamble Power Threshold....... 2
  RxRestart  :  Signal Jump Status............. Enabled
  RxRestart  :  Signal Jump Threshold.......... 10
  TxStomp    :  Low RSS Status.  .............. Disabled
  TxStomp    :  Low RSSI Threshold............. 37
  TxStomp    :  Wrong BSSID Status............. Disabled
  TxStomp    :  Wrong BSSID Data Only Status... Disabled
  RxAbort    :  Raw Power Drop Status.......... Disabled
  RxAbort    :  Raw Power Drop Threshold....... 0
  RxAbort    :  Low RSSI Status................ Enabled
  RxAbort    :  Low RSSI Threshold............. 0
  RxAbort    :  Wrong BSSID Status............. Disabled
  RxAbort    :  Wrong BSSID Data Only Status... Disabled

Related Commands

config advanced 802.11b monitor coverage

config advanced 802.11b monitor load

config advanced 802.11b monitor noise

config advanced 802.11b monitor signal

show advanced 802.11b summary

To display the advanced 802.11b/g Cisco lightweight access point name, channel, and transmit level summary, use the show advanced 802.11b summary command.

show advanced 802.11b summary

Syntax Description

show

Displays configurations.

advanced

Advanced parameters.

802.11b

802.11b/g network.

summary

Cisco lightweight access point name, channel, and transmit level summary.


Defaults

None.

Examples

> show advanced 802.11b summary
 
   
AP name               Channel      Txpower Level
-------------------   ----------   ------------
AP1                    11*            1*
AP2                    10*            4
AP3                    6*             2
 
   

Note Asterisks next to channel numbers or power levels indicate that they are being controlled by the global algorithm settings.


Related Commands

show advanced 802.11a summary

show advanced 802.11b txpower

To view the advanced 802.11b/g automatic transmit power assignment, use the show advanced 802.11b txpower command.

show advanced 802.11b txpower

Syntax Description

show

Displays configurations.

advanced

Advanced parameters.

802.11b

802.11b/g network.

txpower

Transmit power.


Defaults

None.

Examples

> show advanced 802.11b txpower
 
   
Automatic Transmit Power Assignment
  Transmit Power Assignment Mode................. AUTO
  Transmit Power Update Interval................. 600 seconds
  Transmit Power Threshold....................... -65 dBm
  Transmit Power Neighbor Count.................. 3 APs
  Transmit Power Update Contribution............. SNI.
  Transmit Power Assignment Leader............... xx:xx:xx:xx:xx:xx
  Last Run....................................... 427 seconds ago

Related Commands

config 802.11b txPower

show advanced backup-controller

To display a list of primary and secondary backup controllers, use the show advanced backup-controller command.

show advanced backup-controller

Syntax Description

show

Displays configurations.

advanced

Advanced parameters.

backup-controller

Advanced backup controller list.


Defaults

None.

Examples

> show advanced backup-controller
 
   
AP primary Backup Controller ....................  controller 10.10.10.10
AP secondary Backup Controller ..................  0.0.0.0

Related Commands

config advanced backup-controller primary, config advanced backup-controller secondary

Other Show Advanced Commands

Use these show advanced commands to show other advanced parameters.

show advanced client-handoff

To display the number of automatic client handoffs after retries, use the show advanced client-handoff command.

show advanced client-handoff

Syntax Description

show

Displays configurations.

advanced

Advanced parameters.

client-handoff

Advanced client handoff count.


Defaults

None.

Examples

> show advanced client-handoff
 
   
Client auto handoff after retries................  130

Related Commands

config advanced timers auth-timeout

config advanced timers rogue-ap

show advanced eap

To display advanced Extensible Authentication Protocol (EAP) settings, use the show advanced eap command.

show advanced eap

Syntax Description

show

Displays configurations.

advanced

Advanced parameters.

eap

Advanced client handoff count.


Defaults

None.

Examples

> show advanced eap
 
   
EAP-Identity-Request Timeout (seconds)........... 1
EAP-Identity-Request Max Retries................. 20
EAP Key-Index for Dynamic WEP.................... 0
EAP Max-Login Ignore Identity Response........... enable
EAP-Request Timeout (seconds).................... 1
EAP-Request Max Retries.......................... 20
EAPOL-Key Timeout (seconds)...................... 1
EAPOL-Key Max Retries............................ 2
 
   

Related Commands

None.

show advanced max-1x-sessions

To display the maximum number of simultaneous 802.1x sessions allowed per access point, use the show advanced max-1x-sessions command.

show advanced max-1x-sessions

Syntax Description

show

Displays configurations.

advanced

Advanced parameters.

max-1x-sessions

Maximum number of simultaneous 802.1x sessions allowed per access point.


Defaults

None.

Examples

> show advanced max-1x-sessions
 
   
Max 802.1x session per AP at a given time........ 0

Related Commands

None.

show advanced probe-limit

To display the number of probes sent to the WLAN controller per access point per client and the probe interval in milliseconds, use the show advanced probe-limit command.

show advanced probe-limit

Syntax Description

show

Displays configurations.

advanced

Advanced parameters.

probe-limit

Number of probes sent to the WLAN controller per access point per client and the probe interval in milliseconds.


Defaults

None.

Examples

> show advanced probe-limit
 
   
Probes sent to switch per AP slot per client....  2
Probe interval in msec...........................  500

Related Commands

None.

show advanced rate

To display whether control path rate limiting is enabled or disabled, use the show advanced rate command.

show advanced rate

Syntax Description

show

Displays configurations.

advanced

Advanced parameters.

rate

Control path rate limiting enabled or disabled.


Defaults

None.

Examples

> show advanced rate
 
   
Control Path Rate Limiting.......................  Disabled

Related Commands

None.

show advanced send-disassoc-on-handoff

To display whether the WLAN controller disassociates clients after a handoff, use the show advanced send-disassoc-on-handoff command.

show advanced send-disassoc-on-handoff

Syntax Description

show

Displays configurations.

advanced

Advanced parameters.

send-disassoc-on-handoff

WLAN controller disassociates clients after a handoff enabled or disabled.


Defaults

None.

Examples

> show advanced send-disassoc-on-handoff
 
   
Send Disassociate on Handoff..................... Disabled

Related Commands

None.

show advanced statistics

To display whether or not the Cisco Wireless LAN controller port statistics are enabled or disabled, use the show advanced statistics command.

show advanced statistics

Syntax Description

show

Displays configurations.

advanced

Advanced parameters.

statistics

Show Cisco Wireless LAN controller port statistics state.


Defaults

None.

Examples

> show advanced statistics
 
   
Switch port statistics...........................  Enabled

Related Commands

config advanced timers auth-timeout

config advanced timers rogue-ap

show advanced timers

To display the advanced mobility anchor, authentication response, and rogue access point entry timers, use the show advanced timers command.

show advanced timers

Syntax Description

show

Displays configurations.

advanced

Advanced parameters.

timers

Advanced system timers.


Defaults

Shown below in examples.

Examples

> show advanced timers
 
   
Authentication Response Timeout (seconds)........ 10
Rogue Entry Timeout (seconds).................... 1200
AP Heart Beat Timeout (seconds).................. 30
AP Discovery Timeout (seconds)................... 10
AP Local mode Fast Heartbeat (seconds)........... disable
AP Hreap mode Fast Heartbeat (seconds)........... disable
AP Primary Discovery Timeout (seconds)........... 120

Related Commands

config advanced timers auth-timeout

config advanced timers rogue-ap

Show AP Commands

Use the show ap commands to show access point parameters.

show ap auto-rf

To display the auto-RF settings for a Cisco lightweight access point, use the show ap auto-rf command.

show ap auto-rf {802.11a | 802.11b} Cisco_AP

Syntax Description

show

Displays configurations.

ap auto-rf

Cisco radio.

{802.11a | 802.11b}

802.11a or 802.11b/g setting.

Cisco_AP

Cisco lightweight access point name.


Defaults

None.

Examples

> show ap auto-rf 802.11a AP1
 
   
Number Of Slots.................................. 2
AP Name.......................................... AP03
MAC Address...................................... 00:0b:85:01:18:b7
  Radio Type..................................... RADIO_TYPE_80211a
  Noise Information
    Noise Profile................................ PASSED
    Channel 36...................................  -88 dBm
    Channel 40...................................  -86 dBm
    Channel 44...................................  -87 dBm
    Channel 48...................................  -85 dBm
    Channel 52...................................  -84 dBm
    Channel 56...................................  -83 dBm
    Channel 60...................................  -84 dBm
    Channel 64...................................  -85 dBm
  Interference Information
    Interference Profile......................... PASSED
    Channel 36...................................  -66 dBm @  1% busy
    Channel 40................................... -128 dBm @  0% busy
    Channel 44................................... -128 dBm @  0% busy
    Channel 48................................... -128 dBm @  0% busy
    Channel 52................................... -128 dBm @  0% busy
    Channel 56...................................  -73 dBm @  1% busy
    Channel 60...................................  -55 dBm @  1% busy
    Channel 64...................................  -69 dBm @  1% busy
  Rogue Histogram (20/40_ABOVE/40_BELOW)
    Channel 36................................... 16/ 0/ 0
    Channel 40................................... 28/ 0/ 0
    Channel 44...................................  9/ 0/ 0
    Channel 48...................................  9/ 0/ 0
    Channel 52...................................  3/ 0/ 0
    Channel 56...................................  4/ 0/ 0
    Channel 60...................................  7/ 1/ 0
    Channel 64...................................  2/ 0/ 0
  Load Information
    Load Profile................................. PASSED
    Receive Utilization.......................... 0%
    Transmit Utilization......................... 0%
    Channel Utilization.......................... 1%
    Attached Clients............................. 1 clients
  Coverage Information
    Coverage Profile............................. PASSED
    Failed Clients............................... 0 clients
  Client Signal Strengths
    RSSI -100 dBm................................ 0 clients
    RSSI  -92 dBm................................ 0 clients
    RSSI  -84 dBm................................ 0 clients
    RSSI  -76 dBm................................ 0 clients
    RSSI  -68 dBm................................ 0 clients
    RSSI  -60 dBm................................ 0 clients
    RSSI  -52 dBm................................ 0 clients
  Client Signal To Noise Ratios
    SNR    0 dBm................................. 0 clients
    SNR    5 dBm................................. 0 clients
    SNR   10 dBm................................. 0 clients
    SNR   15 dBm................................. 0 clients
    SNR   20 dBm................................. 0 clients
    SNR   25 dBm................................. 0 clients
    SNR   30 dBm................................. 0 clients
    SNR   35 dBm................................. 0 clients
    SNR   40 dBm................................. 0 clients
    SNR   45 dBm................................. 0 clients
  Nearby RADs
    RAD 00:0b:85:01:05:08 slot 0.................  -46 dBm on 10.1.30.170
    RAD 00:0b:85:01:12:65 slot 0.................  -24 dBm on 10.1.30.170
  Channel Assignment Information
    Current Channel Average Energy...............  -86 dBm 
    Previous Channel Average Energy..............  -75 dBm 
    Channel Change Count.........................  109 
    Last Channel Change Time..................... Wed Sep 29 12:53e:34 2004
    Recommended Best Channel..................... 44 
  RF Parameter Recommendations
    Power Level.................................. 1
    RTS/CTS Threshold............................ 2347
    Fragmentation Threshold...................... 2346
    Antenna Pattern.............................. 0

Related Commands

config 802.11a antenna

config 802.11b antenna

config cell

show ap ccx rm

To display an access point's ccx radio management status information, use the show ap ccx rm command.

show ap ccxrm ap_name status

Syntax Description

ap_name

Specified the access point name.


Defaults

This command has no defaults.

Command History

Release
Modification

4.1

This command was introduced.


Examples

> show ap ccx rm AP1240-21ac status
 
   
A Radio
Channel Load Request ..................... Disabled
Noise Histogram Request .................. Disabled
Beacon Request ........................... Disabled
Frame Request ............................ Disabled
Interval ................................. 60
Iteration ................................ 10
 
   
G Radio
Channel Load Request ..................... Disabled
Noise Histogram Request .................. Disabled
Beacon Request ........................... Disabled
Frame Request ............................ Disabled
Interval ................................. 60
Iteration ................................ 10
 
   

Related Commands

show client ccx

show ap cdp neighbors detail

This command is used to display information regarding the access point's CDP neighbors.

show ap cdp neighbors detail [all | ap_name]

Syntax Description

all

Displays the CDP neighbors for all the access points.

ap_name

Displays the CDP neighbors for the specified access point.


Defaults

This command has no defaults.

Command History

Release
Modification

4.1

This command was introduced.


Examples

> show ap cdp neighbors all
 
   
AP Name:A10-1130
AP IP address:10.00.231.100
-------------------------
Device ID: Switch
Entry address(es): 10.00.231.2
Platform: cisco WS-C3750-24P, Capabilities: Router Switch IGMP
Interface: enet, Port ID (outgoing port): FastEthernet1/0/23 Holdtime: 180 sec
 
   
Version:
Cisco Internetwork Operating System Software IOS (tm) C3750 Software (C3750-I9- M),  
Version 12.2(20)SE4, RELEASE SOFTWARE (fc1) Copyright (c) 1986-2005 by Cisco  Systems, 
Inc. Compiled Sun 09-Jan-05 00:09 by antonino
 
   
advertisement version: 2

Related Commands

None.

show ap config

To display the detailed configuration for a lightweight access point, use the show ap config command.

show ap config {802.11a | 802.11b | general} Cisco_AP

Syntax Description

802.11a

Displays the 802.11a radio settings.

802.11b

Displays the 802.11b/g radio settings.

general

Displays general access point settings.

Cisco_AP

Specifies the lightweight access point name.


Defaults

None.

Examples

> show ap config 802.11a AP02
 
   
Cisco AP Identifier.............................. 0
Cisco AP Name.................................... AP02
AP Regulatory Domain............................. Unconfigured
Switch Port Number .............................. 1
MAC Address...................................... 00:0b:85:18:b6:50
IP Address Configuration......................... DHCP
IP Address....................................... 1.100.49.240
IP NetMask....................................... 255.255.255.0
Gateway IP Addr.................................. 1.100.49.1
Cisco AP Location................................ default-location
Cisco AP Group Name.............................. default-group
Primary Cisco Switch............................. Cisco_32:ab:63
Secondary Cisco Switch...........................
Tertiary Cisco Switch............................
Administrative State ............................ ADMIN_ENABLED
Operation State ................................. REGISTERED
Mirroring Mode .................................. Disabled
AP Mode ........................................... Sniffer
Public Safety ..................................... Global: Disabled, Local: Disabled
Sniffing .............................................. No
Remote AP Debug ................................. Disabled
S/W  Version .................................... 3.1.61.0
Boot  Version ................................... 1.2.59.6
Stats Re--More-- or (q)uit
porting Period .................................. 180
LED State........................................ Enabled
ILP Pre Standard Switch.......................... Disabled
ILP Power Injector............................... Disabled
Number Of Slots.................................. 2
AP Model......................................... AS-1200
AP Serial Number................................. 044110223A
AP Certificate Type.............................. Manufacture Installed
 
   
Attributes for Slot  0
    Radio Type................................... RADIO_TYPE_80211a
    Administrative State ........................ ADMIN_ENABLED
    Operation State ............................. UP
    WLAN Override................................ Disabled
    CellId ...................................... 0
 
   
    Station Configuration
      Configuration ............................. AUTOMATIC
      Number Of WLANs ........................... 1
      Medium Occupancy Limit .................... 100
      CFP Period ................................ 4
      CFP MaxDuration ........................... 60
      BSSID ..................................... 00:0b:85:18:b6:50
    Operation Rate Set
        6000 Kilo Bits........................... MANDATORY
        9000 Kilo Bits........................... SUPPORTED
        12000 Kilo Bits.......................... MANDATORY
        18000 Kilo Bits.......................... SUPPORTED
        24000 Kilo Bits.......................... MANDATORY
        36000 Kilo Bits.......................... SUPPORTED
        48000 Kilo Bits.......................... SUPPORTED
        54000 Kilo Bits.......................... SUPPORTED
      Beacon Period ............................. 100
      DTIM Period ............................... 1
      Fragmentation Threshold ................... 2346
      Multi Domain Capability Implemented ....... TRUE
      Multi Domain Capability Enabled ........... TRUE
      Country String ............................ US
 
   
    Multi Domain Capability
      Configuration ............................. AUTOMATIC
      First Chan Num ............................ 36
      Number Of Channels ........................ 4
 
   
    MAC Operation Parameters
      Configuration ............................. AUTOMATIC
      RTS Threshold ............................. 2347
      Short Retry Limit ......................... 7
      Long Retry Limit .......................... 4
      Fragmentation Threshold ................... 2346
      Maximum Tx MSDU Life Time ................. 512
      Maximum Rx Life Time ...................... 512
 
   
    Tx Power
      Num Of Supported Power Levels ............. 5
      Tx Power Level 1 .......................... 18 dBm
      Tx Power Level 2 .......................... 15 dBm
      Tx Power Level 3........................... 12 dBm
      Tx Power Level 4 .......................... 9 dBm
      Tx Power Level 5 .......................... 6 dBm
      Tx Power Configuration .................... CUSTOMIZED
      Current Tx Power Level..................... 5
 
   
    Phy OFDM parameters
      Configuration ............................. AUTOMATIC
      Current Channel ........................... 36
      TI Threshold .............................. -50
      Antenna Type............................... INTERNAL_ANTENNA
      Internal Antenna Gain (in .5 dBm units).... 11
      AntennaMode................................ ANTENNA_OMNI
 
   
    Performance Profile Parameters
      Configuration ............................. AUTOMATIC
      Interference threshold..................... 10%
      Noise threshold............................  -70 dBm
      RF utilization threshold................... 80%
      Data-rate threshold........................ 1000000 bps
      Client threshold........................... 12 clients
      Coverage SNR threshold..................... 16 dB
      Coverage exception level................... 25%
      Client minimum exception level............. 3 clients
    Rogue Containment Information
    Containment Count............................ 0
 
   
> show ap config 802.11b AP02
 
   
Cisco AP Identifier.............................. 0
Cisco AP Name.................................... AP02
AP Regulatory Domain............................. Unconfigured
Switch Port Number .............................. 1
MAC Address...................................... 00:0b:85:18:b6:50
IP Address Configuration......................... DHCP
IP Address....................................... 1.100.49.240
IP NetMask....................................... 255.255.255.0
Gateway IP Addr.................................. 1.100.49.1
Cisco AP Location................................ default-location
Cisco AP Group Name.............................. default-group
Primary Cisco Switch............................. Cisco_32:ab:63
Secondary Cisco Switch...........................
Tertiary Cisco Switch............................
Administrative State ............................ ADMIN_ENABLED
Operation State ................................. REGISTERED
Mirroring Mode .................................. Disabled
AP Mode ......................................... Local
Remote AP Debug ................................. Disabled
S/W  Version .................................... 3.1.61.0
Boot  Version ................................... 1.2.59.6
Stats Reporting Period .......................... 180
LED State........................................ Enabled
ILP Pre Standard Switch.......................... Disabled
ILP Power Injector............................... Disabled
Number Of Slots.................................. 2
AP Model......................................... AS-1200
AP Serial Number................................. 044110223A
AP Certificate Type.............................. Manufacture Installed
 
   
Attributes for Slot  1
    Radio Type................................... RADIO_TYPE_80211g
    Administrative State ........................ ADMIN_ENABLED
    Operation State ............................. UP
    WLAN Override ............................... Disabled
    CellId ...................................... 0
 
   
    Station Configuration
      Configuration ............................. AUTOMATIC
      Number Of WLANs ........................... 1
      Medium Occupancy Limit .................... 100
      CFP Period ................................ 4
      CFP MaxDuration ........................... 60
      BSSID ..................................... 00:0b:85:18:b6:50
      Operation Rate Set
        1000 Kilo Bits........................... MANDATORY
        2000 Kilo Bits........................... MANDATORY
        5500 Kilo Bits........................... MANDATORY
        11000 Kilo Bits.......................... MANDATORY
        6000 Kilo Bits........................... SUPPORTED
        9000 Kilo Bits........................... SUPPORTED
        12000 Kilo Bits.......................... SUPPORTED
        18000 Kilo Bits.......................... SUPPORTED
        24000 Kilo Bits.......................... SUPPORTED
        36000 Kilo Bits.......................... SUPPORTED
        48000 Kilo Bits.......................... SUPPORTED
        54000 Kilo Bits.......................... SUPPORTED
      Beacon Period ............................. 100
      DTIM Period ............................... 1
      Fragmentation Threshold ................... 2346
      Multi Domain Capability Implemented ....... TRUE
      Multi Domain Capability Enabled ........... TRUE
      Country String ............................ US
 
   
    Multi Domain Capability
      Configuration ............................. AUTOMATIC
      First Chan Num ............................ 1
      Number Of Channels ........................ 11
 
   
    MAC Operation Parameters
      Configuration ............................. AUTOMATIC
      RTS Threshold ............................. 2347
      Short Retry Limit ......................... 7
      Long Retry Limit .......................... 4
      Fragmentation Threshold ................... 2346
      Maximum Tx MSDU Life Time ................. 512
      Maximum Rx Life Time....................... 512
 
   
    Tx Power
      Num Of Supported Power Levels.............. 5
      Tx Power Level 1 .......................... 17 dBm
      Tx Power Level 2........................... 14 dBm
      Tx Power Level 3........................... 11 dBm
      Tx Power Level 4........................... 8 dBm
      Tx Power Level 5........................... 5 dBm
      Tx Power Configuration..................... CUSTOMIZED
      Current Tx Power Level..................... 5
 
   
    Phy OFDM parameters
      Configuration.............................. CUSTOMIZED
      Current Channel............................ 1
      TI Threshold............................... -50
      Antenna Type............................... INTERNAL_ANTENNA
      Internal Antenna Gain (in5 dBm units)...... 11
      Diversity.................................. DIVERSITY_ENABLED
 
   
    Performance Profile Parameters
      Configuration.............................. AUTOMATIC
      Interference threshold..................... 10%
      Noise threshold............................  -70 dBm
      RF utilization threshold................... 80%
      Data-rate threshold........................ 1000000 bps
      Client threshold........................... 12 clients
      Coverage SNR threshold..................... 12 dB
      Coverage exception level................... 25%
      Client minimum exception level............. 3 clients
    Rogue Containment Information
    Containment Count............................ 0
 
   
> show ap config general cisco-ap
 
   
Cisco AP Identifier.............................. 1
Cisco AP Name.................................... cisco-ap
Country code..................................... Multiple Countries:US,CA
Regulatory Domain allowed by Country............. 802.11bg:-AB    802.11a:-AB
AP Country code.................................. US  - United States
AP Regulatory Domain............................. 802.11bg:-A    802.11a:-A
Switch Port Number .............................. 1
MAC Address...................................... 12:12:12:12:12:12
IP Address Configuration......................... Static IP assigned
IP Address....................................... 10.10.10.21
IP NetMask....................................... 255.255.255.0
Domain...........................................
Name Server......................................
Telnet State..................................... Disabled
Ssh State........................................ Disabled
Cisco AP Location................................ default location
Cisco AP Group Name.............................. default-group
Primary Cisco Switch Name........................ 4404
Primary Cisco Switch IP Address.................. 10.10.10.32
Secondary Cisco Switch Name......................
Secondary Cisco Switch IP Address................ Not Configured
Tertiary Cisco Switch Name....................... 4404
Tertiary Cisco Switch IP Address................. 3.3.3.3
Administrative State ............................ ADMIN_ENABLED
Operation State ................................. REGISTERED
Mirroring Mode .................................. Disabled
AP Mode ......................................... Local
Public Safety ................................... Global: Disabled, Local: Disabled
Remote AP Debug ................................. Disabled
S/W  Version .................................... 5.1.0.0
Boot  Version ................................... 12.4.10.0
Mini IOS Version ................................ 0.0.0.0
Stats Reporting Period .......................... 180
LED State........................................ Enabled
PoE Pre-Standard Switch.......................... Enabled
PoE Power Injector MAC Addr...................... Disabled
Power Type/Mode.................................. PoE/Low Power (degraded mode)
Number Of Slots.................................. 2
AP Model......................................... AIR-LAP1252AG-A-K9
IOS Version...................................... 12.4(10:0)
Reset Button..................................... Enabled
AP Serial Number................................. serial_number
AP Certificate Type.............................. Manufacture Installed
Management Frame Protection Validation........... Enabled (Global MFP Disabled)
AP User Mode..................................... CUSTOMIZED
AP User Name..................................... maria
AP Dot1x User Mode............................... Not Configured
AP Dot1x User Name............................... Not Configured
Cisco AP system logging host..................... 255.255.255.255
AP Up Time....................................... 4 days, 06 h 17 m 22 s
AP LWAPP Up Time................................. 4 days, 06 h 15 m 00 s
Join Date and Time............................... Mon Mar 3 06:19:47 2008
 
   
Ethernet Port Duplex............................. Auto
Ethernet Port Speed.............................. Auto
AP Link Latency.................................. Enabled
 Current Delay................................... 0 ms
 Maximum Delay................................... 240 ms
 Minimum Delay................................... 0 ms
 Last updated (based on AP Up Time).............. 4 days, 06 h 17 m 20 s
 
   

Related Commands

config 802.11a antenna

config 802.11b antenna

config 802.11a enable

config 802.11b enable

show ap config global

To display the global syslog server settings for all access points that join the controller, use the show ap config global command.

show ap config global

Syntax Description

show ap config

Displays Cisco radio configurations.

global

Targeted towards all access points joined to the controller.


Defaults

None.

Examples

> show ap config global
 
   
AP global system logging host.............................. 255.255.255.255

Related Commands

show ap config general

show ap core-dump

To display the memory core dump setting for a lightweight access point, use the show ap core-dump command.

show ap core-dump Cisco_AP

Syntax Description

Cisco_AP

Cisco lightweight access point name.


Defaults

None.

Examples

> show ap core-dump AP02

Related Commands

config ap core-dump

show ap crash-file

To display the list of both crash and radio core dump files generated by lightweight access points, use the show ap crash-file command.

show ap crash-file

Syntax Description

This command has no arguments or keywords.

Defaults

This command has no defaults.

Examples

> show ap crash-file

Related Commands

config ap crash-file

show ap eventlog

To view the contents of the event log file for an access point that is joined to the controller, use the show ap eventlog ap_name command.

show ap eventlog ap_name

Syntax Description

ap_name

Displays the event log for the specified access point.


Defaults

None

Command History

Release
Modification

5.1

This command was introduced.


Examples

show ap eventlog CiscoAP
AP event log download has been initiated
Waiting for download to complete
 
   
AP event log download completed.
======================= AP Event log Contents =====================
*Feb 13 11:54:17.146: %LWAPP-3-CLIENTEVENTLOG: AP event log has been cleared from the 
contoller 'admin'
*Feb 13 11:54:32.874: *** Access point reloading. Reason: Reload Command ***
*Mar 1 00:00:39.134: %CDP_PD-4-POWER_OK: Full power - NEGOTIATED inline power source
*Mar 1 00:00:39.174: %LINK-3-UPDOWN: Interface Dot11Radio1, changed state to up
*Mar 1 00:00:39.211: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
*Mar 1 00:00:49.947: %LWAPP-3-CLIENTEVENTLOG: Did not get vendor specific options from 
DHCP.
...

Related Commands

clear ap-eventlog

show ap inventory

This command is used to display inventory information for an access point.

show ap inventory ap_name

Syntax Description

ap_name

Displays the inventory for the specified access point.


Defaults

This command has no defaults.

Command History

Release
Modification

4.1

This command was introduced.


Examples

> show ap inventory test101
 
   

NAME: "test101" , DESCR: "Cisco Wireless Access Point"

PID: AIR-LAP1131AG-A-K9 , VID: V01, SN: FTX1123T2XX

Related Commands

None.

show ap join stats detailed

To display all join-related statistics collected for a specific access point, use the show ap join stats detailed command.

show ap join stats detailed ap_mac

Syntax Description

show

Displays configurations.

ap

All Cisco lightweight access points.

join stats detailed

Join-related statistics collected for a specific access point.

ap_mac

Access point Ethernet MAC address or the MAC address of the 802.11 radio interface.


Defaults

None.

Examples

> show ap join stats detail 00:0b:85:02:0d:20
 
   
Discovery phase statistics
- Discovery requests received.......................... 2
- Successful discovery responses sent.................. 2
- Unsuccessful discovery request processing............ 0
- Reason for last unsuccessful discovery attempt....... Not applicable
- Time at last successful discovery attempt............ Aug 21 12:50:23:335
- Time at last unsuccessful discovery attempt.......... Not applicable
 
   
Join phase statistics
- Join requests received............................... 1
- Successful join responses sent....................... 1
- Unsuccessful join request processing................. 1
- Reason for last unsuccessful join attempt............ RADIUS authorization is pending 
for the AP
- Time at last successful join attempt................. Aug 21 12:50:34:481
- Time at last unsuccessful join attempt............... Aug 21 12:50:34:374
 
   
Configuration phase statistics
- Configuration requests received...................... 1
- Successful configuration responses sent.............. 1
- Unsuccessful configuration request processing........ 0
- Reason for last unsuccessful configuration attempt... Not applicable
- Time at last successful configuration attempt........ Aug 21 12:50:34:374
- Time at last unsuccessful configuration attempt...... Not applicable
 
   
Last AP message decryption failure details
- Reason for last message decryption failure........... Not applicable
 
   
Last AP disconnect details
- Reason for last AP connection failure................ Not applicable
 
   
Last join error summary
- Type of error that occurred last..................... Lwapp join request rejected
- Reason for error that occurred last.................. RADIUS authorization is pending 
for the AP
- Time at which the last join error occurred........... Aug 21 12:50:34:374

Related Commands

show ap join stats summary all

show ap join stats summary

show ap join stats summary

To display the last join error detail for a specific access point, use the show ap join stats summary command.

show ap join stats summary ap_mac


Note To obtain the MAC address of the 802.11 radio interface, enter the show interfaces Dot11Radio 0 command on the access point.


Syntax Description

show

Displays configurations.

ap

All Cisco lightweight access points.

join stats summary

Summary of all access points that joined or attempted to join to the controller.

ap_mac

Access point Ethernet MAC address or the MAC address of the 802.11 radio interface.


Defaults

None.

Examples

> show ap join stats summary 00:0b:85:02:0d:20
 
   
Is the AP currently connected to controller.......................... No
Time at which the AP joined this controller last time................ Aug 21 12:50:36:061
Type of error that occurred last..................................... Lwapp join request 
rejected
Reason for error that occurred last.................................. RADIUS authorization 
is pending for the AP
Time at which the last join error occurred........................... Aug 21 12:50:34:374

Related Commands

show ap join stats summary all

show ap join stats summary all

To display the MAC addresses of all the access points that are joined to the controller or that have tried to join, use the show ap join stats summary all command.

show ap join stats summary all

Syntax Description

show

Displays configurations.

ap

All Cisco lightweight access points.

join stats summary

Summary of all access points that joined or attempted to join to the controller.


Defaults

None.

Examples

> show ap join stats summary all
 
   
Number of APs................................. 3
00:0b:85:1b:7c:b0............................. Joined
00:12:44:bb:25:d0............................. Joined
00:13:19:31:9c:e0............................. Not joined

Related Commands

show ap join stats summary

show ap stats

To display the statistics for a Cisco lightweight access point, use the show ap stats command.

show ap stats {802.11a | 802.11b | wlan} Cisco_AP

Syntax Description

show

Displays configurations.

ap stats

Cisco radio.

802.11a

802.11a statistics.

802.11b

802.11b/g statistics.

wlan

WLAN statistics.

Cisco_AP

Cisco lightweight access point name.


Defaults

None.

Examples

> show ap stats 802.11b AP02
 
   
Number Of Slots.................................. 2
AP Name.......................................... AP02
MAC Address...................................... 00:0b:85:18:b6:50
  Radio Type..................................... RADIO_TYPE_80211a
  Stats Information
    Number of Users.............................. 0
    TxFragmentCount.............................. 1679
    MulticastTxFrameCnt.......................... 1260
    FailedCount.................................. 15892
    RetryCount................................... 331
    MultipleRetryCount........................... 0
    FrameDuplicateCount.......................... 0
    RtsSuccessCount.............................. 0
    RtsFailureCount.............................. 0
    AckFailureCount.............................. 80212
    RxFragmentCount.............................. 248671
    MulticastRxFrameCnt.......................... 0
    FcsErrorCount................................ 105968
    TxFrameCount................................. 1679
    WepUndecryptableCount........................ 0

Related Commands

config ap enable

show ap summary

show ap summary

To display a summary of all lightweight access points attached to the controller, use the show ap summary command. A list containing each lightweight access point name, number of slots, manufacturer, MAC address, location and the controller port number is displayed.

show ap summary

Syntax Description

show

Displays configurations.

ap

All Cisco lightweight access points.

summary

Summary of all Cisco lightweight access points.


Defaults

None.

Examples

> show ap summary
Number of APs.................................... 2
Global AP User Name.............................. user
Global AP Dot1x User Name........................ Not Configured
 
   
Number of APs.................................... 2
Global AP User Name.............................. user
Global AP Dot1x User Name........................ Not Configured
 
   
AP Name   Slots  AP Model            Ethernet MAC       Location    Port Country  Priority
--------  -----  ----------------    -----------------  ----------  ---- -------  --------
wolverine 2      AIR-LAP1252AG-A-K9  00:1b:d5:13:39:74  Reception   1    US       3
ap:1120   1      AIR-LAP1121G-A-K9   00:1b:d5:a9:ad:08  Hall 235    1    US       1
 
   

Related Commands

config ap enable

config ap priority

config network ap-priority

show advanced 802.11a summary

show advanced 802.11b summary

show ap wlan

To display whether or not a Cisco Wireless LAN controller radio is in wireless LAN override mode (as described in the related product guide), use the show ap wlan command.

show ap wlan {802.11a | 802.11b} Cisco_AP

Syntax Description

show

Displays configurations.

ap

All Cisco lightweight access points.

wlan

Wireless LAN parameter.

802.11a

Displays the access point's 802.11a radio statistics.

802.11b

Displays the access point's 802.11b radio statistics.

ap_name

Specifies the lightweight access point name.


Defaults

None.

Examples

> show ap wlan 802.11a AP01
 
   
AP has following wlan Id's configured as override wlanId
        Wlan Id:........................................ 3
 
   
> show ap wlan 802.11a AP15
 
   
Cisco AP is not in override mode. 

Related Commands

show ap summary

config ap wlan enable

show arp switch

To display the Cisco Wireless LAN controller MAC addresses, IP Addresses, and port types, use the show arp switch command.

show arp switch

Syntax Description

show

Displays configurations.

arp

arp MAC addresses, IP Addresses, and port types.

switch

Cisco Wireless LAN controller parameters.


Defaults

None.

Examples

> show arp switch
 
   
MAC Address          IP Address         Port      VLAN      Type
------------------- ---------------- ------------ ---- -------------------
xx:xx:xx:xx:xx:xx   xxx.xxx.xxx.xxx  service port    1         
xx:xx:xx:xx:xx:xx   xxx.xxx.xxx.xxx  service port               
xx:xx:xx:xx:xx:xx   xxx.xxx.xxx.xxx  service port               

Related Commands

debug arp

show auth-list

To display the access point authorization list, use the show auth-list command.

show auth-list

Syntax Description

show

Displays configurations.

auth-list

Displays access point authorization list.


Defaults

None.

Examples

> show auth-list
 
   
Authorize APs against AAA...................... disabled
Allow APs with Self-signed Certificate (SSC)... disabled
 
   
Mac Addr                  Cert Type    Key Hash
-----------------------   ----------   ------------------------------------------
xx:xx:xx:xx:xx:xx         MIC

Related Commands

config auth-list

show boot

Each Cisco Wireless LAN controller retains one primary and one backup operating system software load in non-volatile RAM. This allows operators to have the Cisco Wireless LAN controllers boot off the primary load (default), or revert to the backup load when desired. To display the primary and backup software build numbers with an indication of which is active, use the show boot command.

show boot

Syntax Description

show

Displays configurations.

boot

Software bootable versions.


Defaults

None.

Examples

> show boot
 
   
Primary Boot Image............................... 3.2.13.0 (active)
Backup Boot Image................................ 3.2.15.0

Related Commands

config exclusionlist add

config exclusionlist delete

config exclusionlist description

show client

Show Certificate Commands

Use the show certificate commands to display certificate settings.

show certificate compatibility

To display whether or not certificates are verified as compatible in the Cisco Wireless LAN controller, use the show certificate compatibility command.

show certificate compatibility

Syntax Description

show

Displays configurations.

certificate

All certificates.

compatibility

Compatibility of certificates.


Defaults

None.

Examples

> show certificate compatibility
 
   
Certificate compatibility mode:................ off

Related Commands

show certificate summary

show certificate summary

To verify that the controller has generated a certificate, use the show certificate summary command.

show certificate summary

Syntax Description

show

Displays configurations.

certificate

All certificates.

summary

Synopsis of all certificates.


Defaults

None.

Examples

> show certificate summary
 
   
Web Administration Certificate................. Locally Generated
Web Authentication Certificate................. Locally Generated
Certificate compatibility mode:................ off

Related Commands

show certificate compatibility

Show Client Commands

Use the show client commands to display client settings.

show client ap

To display the clients on a Cisco lightweight access point, use the show client ap command.


Note The show client ap command may list the status of automatically disabled clients. Use the show exclusionlist command to view clients on the exclusion list (blacklisted).


show client ap {802.11a | 802.11b} Cisco_AP

Syntax Description

show

Displays configurations.

client ap

Cisco radio.

802.11a

802.11a clients.

802.11b

802.11b/g clients.

Cisco_AP

Cisco lightweight access point name.


Defaults

None.

Examples

> show client ap 802.11b AP1
 
   
MAC Address        AP Id   Status         WLAN Id    Authenticated
-----------------  ------  -------------  ---------  -------------
xx:xx:xx:xx:xx:xx      1   Associated     1          No

Related Commands

show client detail

show client summary

show client username

show exclusionlist

show client ccx client-capability

To view the client's capability information, use the show client ccx client-capability command.


Note This command displays the client's available capabilities, not current settings for the capabilities.


show client ccx client-capability client_mac_address

Syntax Description

client_mac_address

Specifies the MAC address of the client.


Defaults

This command has no defaults.

Command History

Release
Modification

4.2

This command was introduced.


Examples

> show client ccx client-capability 00:40:96:a8:f7:98 
Service Capability.................................. Voice, Streaming(uni-directional) 
Video, Interactive(bi-directional) Video
Radio Type.......................................... DSSS OFDM(802.11a) HRDSSS(802.11b) 
ERP(802.11g)
 
   
Radio Type.......................................... DSSS
	Radio Channels.................................. 1 2 3 4 5 6 7 8 9 10 11
	Tx Power Mode................................... Automatic
	Rate List(MB)................................... 1.0 2.0
 
   
Radio Type.......................................... HRDSSS(802.11b)
	Radio Channels.................................. 1 2 3 4 5 6 7 8 9 10 11
	Tx Power Mode................................... Automatic
	Rate List(MB)................................... 5.5 11.0
 
   
Radio Type.......................................... ERP(802.11g)
	Radio Channels.................................. 1 2 3 4 5 6 7 8 9 10 11
	Tx Power Mode................................... Automatic
	Rate List(MB)................................... 6.0 9.0 12.0 18.0 24.0 36.0 48.0 54.0

Related CommandsAre you sure you want to start? (y/N)y Are you sure you want to start? (y/N)

config client ccx get-profiles

config client ccx get-operating-parameters

config client ccx get-client-capability

show client ccx profiles

show client ccx operating-parameters

config client ccx stats-request

show client ccx stats-report

show client ccx frame-data

To view the data frames sent from the client for the last test, use the show client ccx frame-data command.

show client ccx frame-data client_mac_address

Syntax Description

client_mac_address

Specifies the MAC address of the client.


Defaults

This command has no defaults.

Command History

Release
Modification

4.2

This command was introduced.


Examples

> LOG Frames:
Frame Number ....................... 1
Last Frame Number .................. 1120
Direction .......................... 1
Timestamp .......................... 0d 00h 50m 39s 863954us
Frame Length ....................... 197
Frame Data:
00000000: 80 00 00 00 ff ff ff ff 	ff ff 00 12 44 bd bd b0 	............D...
00000010: 00 12 44 bd bd b0 f0 af 	43 70 00 f2 82 01 00 00 	..D.....Cp......
00000020:	64 00 11 08 00 01 00 01 		 08 8c 12 98 24 b0 48 60 	d...........$.H'
00000030: 6c 05 04 01 02 00 00 85 	1e 00 00 89 00 0f 00 ff 	1...............
00000040: 03 19 00 41 50 32 33 2d 	31 30 00 00 00 00 00 00 	...AP23-10......
00000050: 00 00 00 00 00 00 26 96 	06 00 40 96 00 ff ff dd	 ......&...@.....
00000060:	18 00 50 f2 01 01 00 00 	 50 f2 05 01 00 00 50 f2	 	..P.....P.....P.
00000070:	05 01 00 00 40 96 00 28 	 00 dd 06 00 40 96 01 01	 	....@..(....@...
 
   
00000080: 00 dd 05 00 40 96 03 04 	dd 16 00 40 96 04 00 02 	....@......@....
00000090: 07 a4 00 00 23 a4 00 00 	42 43 00 00 62 32 00 00	 	....#...BC..b2..
000000a0:	dd 05 00 40 96 0b 01 dd 	 18 00 50 f2 02 01 01 82 	...@......P.....
000000b0:	00 03 a4 00 00 27 a4 00 	 00 42 43 5e 00 62 32 2f 	.....'...BC^.b2/
 
   
> LOG Frames:
Frame Number ....................... 2
Last Frame Number .................. 1120
Direction .......................... 1
Timestamp .......................... 0d 00h 50m 39s 878289us
Frame Length ....................... 147
Frame Data:
00000000: 80 00 00 00 ff ff ff ff 	ff ff 00 0d ed c3 a0 22 	..............."
00000010: 00 0d ed c3 a0 22 00 bd 	4d 50 a5 f7 78 08 00 00 	....."..MP..x...
00000020:	64 00 01 00 00 01 00 01 		 08 8c 12 98 24 b0 48 60 	d...........$.H'
00000030: 6c 05 04 01 02 00 00 85 	1e 00 00 84 00 0f 00 ff 	1...............
00000040: 03 19 00 72 6f 67 75 65 	2d 74 65 73 74 31 00 00 	...rogue-test1..
00000050: 00 00 00 00 00 00 23 96 	06 00 40 96 00 10 00 dd	 ......#...@.....
00000060:	06 00 40 96 01 01 00 dd 	 05 00 40 96 03 04 dd 05	 		....@.......@...
00000070:	00 40 96 0b 01 dd 18 00 	 50 f2 02 01 01 81 00 03	 	....@.......@...
00000080: a4 00 00 27 a4 00 00 42 	43 5e 00 62 32 2f 00 d2 	...'...BC^.b2/..
00000090: b4 ab 84 					 	 									...
 
   
> LOG Frames:
Frame Number ....................... 3
Last Frame Number .................. 1120
Direction .......................... 1
Timestamp .......................... 0d 00h 50m 39s 881513us
Frame Length ....................... 189
Frame Data:
00000000: 80 00 00 00 ff ff ff ff 	ff ff 00 12 44 bd 80 30 	............D..0
00000010: 00 12 44 bd 80 30 60 f7	 46 c0 8b 4b d1 05 00 00 	..D..0'.F..K....
00000020:	64 00 11 08 00 01 00 01 		 08 8c 12 98 24 b0 48 60 	d...........$.H'
00000030: 6c 05 04 00 02 00 00 85 	1e 00 00 89 00 0f 00 ff 	1...............
00000040: 03 19 00 41 50 34 30 2d 	31 37 00 00 00 00 00 00 	...AP23-10......
00000050: 00 00 00 00 00 00 26 dd 	18 00 50 f2 01 01 00 00	 ......&...P.....
00000060:	50 f2 05 01 00 00 50 f2 	 05 01 00 00 40 96 00 28	 	P.....P.....@..(
00000070:	00 dd 06 00 40 96 01 01 	 00 dd 05 00 40 96 03 04	 	....@.......@...
 
   
00000080: dd 16 00 40 96 04 00 05 	07 a4 00 00 23 a4 00 00 	....@......#....
00000090: 42 43 00 00 62 32 00 00 	dd 05 00 40 96 0b 01 dd	 	BC..b2.....@....
000000a0:	18 00 50 f2 02 01 01 85 	 00 03 a4 00 00 27 a4 00 	..P..........'..
000000b0:	00 42 43 5e 00 62 32 2f 	 00 0b 9a 1d 6f 		 	 	 	 	 	 	 	 	 	.BC^.b2/....o...

Related Commands

show client ccx last-response-status

show client ccx last-response-status

To view the status of the last test response, use the show client ccx last-response-status command.

show client ccx last-response-status client_mac_address

Syntax Description

client_mac_address

Specifies the MAC address of the client.


Defaults

This command has no defaults.

Command History

Release
Modification

4.2

This command was introduced.


Examples

> show client ccx last-response-status 
Test Status ........................ Success
 
   
Response Dialog Token.............. 87
Response Status.................... Successful
Response Test Type................. 802.1x Authentication Test
Response Time...................... 3476 seconds since system boot

Related Commands

config client ccx default-gw-ping

config client ccx dhcp

config client ccx dns-ping

config client ccx dns-resolve

config client ccx test-association

config client ccx test-dot1x

config client ccx test-profile

config client ccx test-abort

config client ccx clear-results

config client ccx send-message

show client ccx last-response-status

show client ccx results

show client ccx frame-data

show client ccx last-test-status

To view the status of the last test, use the show client ccx last-test-status command.

show client ccx last-test-status client_mac_address

Syntax Description

client_mac_address

Specifies the MAC address of the client.


Defaults

This command has no defaults.

Command History

Release
Modification

4.2

This command was introduced.


Examples

> show client ccx last-test-status
Test Type ........................ Gateway Ping Test

Test Status ...................... Pending/Success/Timeout

Dialog Token ..................... 15

Timeout .......................... 15000 ms

Request Time ..................... 1329 seconds since system boot

Related Commands

config client ccx default-gw-ping

config client ccx dhcp

config client ccx dns-ping

config client ccx dns-resolve

config client ccx test-association

config client ccx test-dot1x

config client ccx test-profile

config client ccx test-abort

config client ccx clear-results

config client ccx send-message

show client ccx last-response-status

show client ccx results

show client ccx frame-data

show client ccx log-response

To display a log response, use the show client ccx log-response command.

show client ccx log-response [ roam | rsna | syslog] client_mac_address

Syntax Description

roam

Displays CCX client roaming log response.

rsna

Displays CCX client RSNA log response.

syslog

Displays CCX client system log response.

client_mac_address

Displays the inventory for the specified access point.


Defaults

This command has no defaults.

Command History

Release
Modification

4.1

This command was introduced.


Examples

> config client ccx log-request syslog 00:40:96:a8:f7:98 
> show client ccx log-response syslog 00:40:96:a8:f7:98 
Tue Jun 26 18:07:48 2007		 		 	Syslog Response LogID=131: Status=Successful
						 	Event Timestamp=0d 00h 19m 42s 278987us
							Client SysLog = `<11> Jun 19 11:49:47 unraval13777 Mandatory 
elements missing in the OID response'
							Event Timestamp=0d 00h 19m 42s 278990us
							Client SysLog = `<11> Jun 19 11:49:47 unraval13777 Mandatory 
elements missing in the OID response'
Tue Jun 26 18:07:48 2007		 		 	Syslog Response LogID=131: Status=Successful
						 	Event Timestamp=0d 00h 19m 42s 278987us
							Client SysLog = `<11> Jun 19 11:49:47 unraval13777 Mandatory 
elements missing in the OID response'
							Event Timestamp=0d 00h 19m 42s 278990us
							Client SysLog = `<11> Jun 19 11:49:47 unraval13777 Mandatory 
elements missing in the OID response'
 
   
 
   
> config client ccx log-request roam 00:40:96:a8:f7:98
> show client ccx log-response roam 00:40:96:a8:f7:98
 
   
Thu Jun 22 11:55:14 2007 	 	Roaming Response LogID=20: Status=Successful
						Event Timestamp=0d 00h 00m 13s 322396us
						Source BSSID=00:40:96:a8:f7:98, Target BSSID=00:0b:85:23:26:70, 
						Transition Time=100(ms) 
						Transition Reason: Normal roam, poor link
						Transition Result: Success
Thu Jun 22 11:55:14 2007 	 	Roaming Response LogID=133: Status=Successful
						Event Timestamp=0d 00h 00m 16s 599006us
						Source BSSID=00:0b:85:81:06:c2, Target BSSID=00:0b:85:81:06:c2, 
						Transition Time=3235(ms) 
						Transition Reason: Normal roam, poor link
						Transition Result: Success
Thu Jun 22 18:28:48 2007 	 	Roaming Response LogID=133: Status=Successful
						Event Timestamp=0d 00h 00m 08s 815477us
						Source BSSID=00:0b:85:81:06:c2, Target BSSID=00:0b:85:81:06:d2, 
						Transition Time=3281(ms) 
						Transition Reason: First association to WLAN
						Transition Result: Success
 
   
> config client ccx log-request rsna 00:40:96:a8:f7:98
> show client ccx log-response rsna 00:40:96:a8:f7:98
 
   
Tue Oct 05 11:06:48 2006  
RSNA Response LogID=2: Status=Successful
Event Timestamp=242424242424
Target BSSID=00:0b:85:23:26:70
RSNA Version=1
Group Cipher Suite=00-0f-ac-01 
Pairwise Cipher Suite Count = 2
Pairwise Cipher Suite 0 = 00-0f-ac-02 
Pairwise Cipher Suite 1 = 00-0f-ac-04 
AKM Suite Count = 2 
KM Suite 0 = 00-0f-ac-01 
KM Suite 1 = 00-0f-ac-02 
SN Capability = 0x1 
PMKID Count = 2 
PMKID 0 = 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 
PMKID 1 = 0a 0b 0c 0d 0e 0f 17 18 19 20 1a 1b 1c 1d 1e 1f 
802.11i Auth Type: EAP_FAST
RSNA Result: Success
Tue Oct 05 11:05:48 2006  
RSNA Request LogID=2
 
   

Related Commands

config client ccx log-request

show client ccx manufacturer-info

To view the client manufacturing information, use the show client ccx manufacturer-info command.

show client ccx manufacturer-info client_mac_address

Syntax Description

client_mac_address

Specifies the MAC address of the client.


Defaults

This command has no defaults.

Command History

Release
Modification

4.2

This command was introduced.


Examples

> show client ccx manufacturer-info 00:40:96:a8:f7:98 
Manufacturer OUI .............................. 00:40:96
Manufacturer ID ............................... Cisco
Manufacturer Model ............................ Cisco Aironet 802.11a/b/g Wireless Adapter
Manufacturer Serial ........................... FOC1046N3SX
Mac Address ................................... 00:40:96:b2:8d:5e
Radio Type .................................... DSSS OFDM(802.11a) HRDSSS(802.11b)
  ERP(802.11g)
Antenna Type .................................. Omni-directional diversity
Antenna Gain .................................. 2 dBi
 
   
Rx Sensitivity:
Radio Type ...................................... DSSS
Rx Sensitivity .................................. Rate:1.0 Mbps, MinRssi:-95, MaxRss1:-30
Rx Sensitivity .................................. Rate:2.0 Mbps, MinRssi:-95, MaxRss1:-30
Radio Type ...................................... HRDSSS(802.11b)
Rx Sensitivity .................................. Rate:5.5 Mbps, MinRssi:-95, MaxRss1:-30
Rx Sensitivity .................................. Rate:11.0 Mbps, MinRssi:-95, MaxRss1:-30
Radio Type ...................................... ERP(802.11g)
Rx Sensitivity .................................. Rate:6.0 Mbps, MinRssi:-95, MaxRss1:-30
Rx Sensitivity .................................. Rate:9.0 Mbps, MinRssi:-95, MaxRss1:-30
Rx Sensitivity .................................. Rate:12.0 Mbps, MinRssi:-95, MaxRss1:-30
Rx Sensitivity .................................. Rate:18.0 Mbps, MinRss1:-95, MaxRss1:-30

Related Commands

config client ccx get-profiles

config client ccx get-operating-parameters

config client ccx get-manufacturer-info

config client ccx get-client-capability

show client ccx profiles

show client ccx operating-parameters

show client ccx client-capability

config client ccx stats-request

show client ccx stats-report

show client ccx operating-parameters

To view the client operating-parameters, use the show client ccx operating-parameters command.

show client ccx operating-parameters client_mac_address

Syntax Description

client_mac_address

Specifies the MAC address of the client.


Defaults

This command has no defaults.

Command History

Release
Modification

4.2

This command was introduced.


Examples

> show client ccx operating-parameters 00:40:96:a8:f7:98 
Client Mac ......................................... 00:40:96:b2:8d:5e
Radio Type ......................................... OFDM(802.11a)
 
   
Radio Type ......................................... OFDM(802.11a)
	Radio Channels ................................. 36 40 44 48 52 56 60 64 100 104 108 
112 116 120 124 128 132 136 140 149 153 157 161 165
	Tx Power Mode .................................. Automatic
	Rate List(MB)................................... 6.0 9.0 12.0 18.0 24.0 36.0 48.0 54.0
 
   
Power Save Mode .................................... Normal Power Save
SSID ............................................... wifi
Security Parameters[EAP Method, Credential]......... None
Auth Method ........................................ None
Key Management...................................... None
Encryption ......................................... None
Device Name ........................................ Wireless Network Connection 15
Device Type ........................................ 0
OS Id .............................................. Windows XP
OS Version ......................................... 5.1.6.2600 Service Pack 2
IP Type ............................................ DHCP address
IPv4 Address ....................................... Available
IP Address ......................................... 70.0.4.66
Subnet Mask ........................................ 255.0.0.0
Default Gateway .................................... 70.1.0.1
IPv6 Address ....................................... Not Available
IPv6 Address ....................................... 0:0:0:0:0:0:0:0:0:0:0:0:0:0:0:0:
IPv6 Subnet Mask ................................... 0:0:0:0:0:0:0:0:0:0:0:0:0:0:0:0:
DNS Servers ........................................ 103.0.48.0
WINS Servers ....................................... 
System Name ........................................ URAVAL3777
Firmware Version ................................... 4.0.0.187
Driver Version ..................................... 4.0.0.187

Related Commands

config client ccx get-profiles

config client ccx get-operating-parameters

config client ccx get-manufacturer-info

config client ccx get-client-capability

show client ccx profiles

show client ccx manufacturer-info

show client ccx client-capability

config client ccx stats-request

show client ccx stats-report

show client ccx profiles

To view the client profiles, use the show client ccx profiles command.

show client ccx profiles client_mac_address

Syntax Description

client_mac_address

Specifies the MAC address of the client.


Defaults

This command has no defaults.

Command History

Release
Modification

4.2

This command was introduced.


Examples

> show client ccx profiles 00:40:96:a8:f7:98 
Number of Profiles .................................. 1
Current Profile ..................................... 1
 
   
Profile ID .......................................... 1
Profile Name ........................................ wifiEAP
SSID ................................................ wifiEAP
Security Parameters [EAP Method, Credential]......... EAP-TLS, Host OS Login Credentials
Auth Method ......................................... EAP
Key Management ...................................... WPA2+CCKM
Encryption .......................................... AES-CCMP
Power Save Mode ..................................... Constantly Awake
Radio Configuration:
Radio Type........................................... DSSS
	Preamble Type.................................... Long preamble
	CCA Method....................................... Energy Detect + Carrier
Detect/Correlation
	Data Retries..................................... 6
	Fragment Threshold............................... 2342
	Radio Channels................................... 1 2 3 4 5 6 7 8 9 10 11
	Tx Power Mode.................................... Automatic
	Rate List (MB)................................... 1.0 2.0
 
   
Radio Type........................................... HRDSSS(802.11b)
	Preamble Type.................................... Long preamble
	CCA Method....................................... Energy Detect + Carrier
Detect/Correlation
	Data Retries..................................... 6
	Fragment Threshold............................... 2342
	Radio Channels................................... 1 2 3 4 5 6 7 8 9 10 11
	Tx Power Mode.................................... Automatic
	Rate List(MB).................................... 5.5 11.0
 
   
Radio Type........................................... ERP(802.11g)
	Preamble Type.................................... Long preamble
	CCA Method....................................... Energy Detect + Carrier
Detect/Correlation
	Data Retries..................................... 6
	Fragment Threshold............................... 2342
	Radio Channels................................... 1 2 3 4 5 6 7 8 9 10 11
	Tx Power Mode.................................... Automatic
	Rate List (MB)................................... 6.0 9.0 12.0 18.0 24.0 36.0 48.0 
54.0
 
   
Radio Type........................................... OFDM(802.11a)
	Preamble Type.................................... Long preamble
	CCA Method....................................... Energy Detect + Carrier
Detect/Correlation
	Data Retries..................................... 6
	Fragment Threshold............................... 2342
	Radio Channels................................... 36 40 44 48 52 56 60 64 149 153 157 
161 165
	Tx Power Mode.................................... Automatic
	Rate List (MB)................................... 6.0 9.0 12.0 18.0 24.0 36.0 48.0 
54.0
	

Related Commands

config client ccx get-operating-parameters

config client ccx get-manufacturer-info

config client ccx get-client-capability

show client ccx operating-parameters

show client ccx manufacturer-info

show client ccx client-capability

config client ccx stats-request

show client ccx stats-report

show client ccx results

To view the results from the last successful diagnostic test, use the show client ccx results command.

show client ccx results client_mac_address

Syntax Description

client_mac_address

Specifies the MAC address of the client.


Defaults

This command has no defaults.

Command History

Release
Modification

4.2

This command was introduced.


Examples

Information similar to the following appears for the 802.1x authentication test:
 
   
dot1x Complete....................................... Success
EAP Method........................................... *1,Host OS Login Credentials
dot1x Status......................................... 255
 
   

Related Commands

config client ccx default-gw-ping

config client ccx dhcp

config client ccx dns-ping

config client ccx dns-resolve

config client ccx test-association

config client ccx test-dot1x

config client ccx test-profile

config client ccx test-abort

config client ccx clear-results

config client ccx send-message

show client ccx last-test-status

show client ccx last-response-status

show client ccx frame-data

show client ccx rm

This command is used to display CCX client information.

show client ccx rm client_MAC [ status |
report ( chan-load | noise-hist | frame request | beacon | frame )]

Syntax Description

client_MAC

Specifies the client MAC address.

status

Displays client ccx radio management status information.

report

Displays client ccx radio management report.

chan-load

Displays radio management channel load reports.

noise-hist

Displays radio management noise histogram reports.

beacon

Displays radio managemant beacon load reports.

frame

Displays radio management frame reports.


Defaults

This command has no defaults.

Command History

Release
Modification

4.1

This command was introduced.


Examples

> show client ccx rm 00:40:96:15:21:ac status
 
   
Client Mac Address............................... 00:40:96:15:21:ac 
Channel Load Request............................. Enabled 
Noise Histogram Request.......................... Enabled 
Beacon Request................................... Enabled 
Frame Request.................................... Enabled 
Interval......................................... 30 
Iteration........................................... 10
 
   
 
   
> show client ccx rm 00:40:96:15:21:ac report chan-load
Channel Load Report 
Client Mac Address............................... 00:40:96:ae:53:bc 
Timestamp........................................ 788751121 
Incapable Flag................................... On 
Refused Flag........................................ On 
Chan CCA Busy Fraction 
----------------------- 
1 	194 
2 	86  
3 	103 
4 	0  
5 	178 
6 	82  
7 	103 
8 	95  
9 	13  
10 	222 
11 	75 
 
   
 
   
> show client ccx rm 00:40:96:15:21:ac report noise-hist  
Noise Histogram Report 
Client Mac Address............................... 00:40:96:15:21:ac 
Timestamp........................................ 4294967295 
Incapable Flag................................... Off 
Refused Flag........................................ Off 
Chan RPI0 RPI1 RPI2 RPI3 RPI4 RPI5 RPI6 RPI7 

 
   
> show client ccx rm 00:40:96:ae:53:bc report beacon  
Beacon Report 
Client Mac Address............................... 00:40:96:ae:53:bc 
Timestamp....................................... 788853242 
Incapable Flag.................................. On 
Refused Flag....................................... On 
 
Channel No...................................... 3  
Phy Type........................................ ERP 
Received signal Power........................... -80dbm 
BSSID........................................... 00:12:7f:50:93:10 
Parent TFS...................................... bc729d5e 
Parent TFS...................................... 42f637ec02000000 
Beacon Interval................................. 100 
Capability Information............................. 0401 
 
Channel No...................................... 7  
Phy Type........................................ ERP 
Received signal Power........................... -62dbm 
BSSID........................................... 00:12:44:b3:b9:e0 
Parent TFS...................................... 4f46aa5e 
Parent TFS...................................... bd1ba60f00000000 
Beacon Interval................................. 100 
Capability Information............................. 0421
 
   
 
   
> show client ccx rm 00:40:96:ae:53:bc report frame  
Frame Report 
Client Mac Address.............................. 00:40:96:ae:53:bc 
Timestamp....................................... 789140437 
Incapable Flag.................................. On 
Refused Flag....................................... On 
Chan Tx Address Bssid RcxSigPwr Frame Count 
--------------------------------------------------------------
 
   

Related Commands

None.

show client ccx stats-report

To display the CCX statistics report from a specified client device, use the show slient ccx stats-report command.

show client ccx stats-report client_mac_address

Syntax Description

client_mac_address

Displays the MAC address for the specified client device.


Defaults

This command has no defaults.

Command History

Release
Modification

4.1

This command was introduced.


Examples

> config client ccx stats-request 1 dot11 00:40:96:a8:f7:98 
> show client ccx stats-report 00:40:96:a8:f7:98 
 
   
Measurement duration = 1
 
   
dot11TransmittedFragmentCount       = 1
dot11MulticastTransmittedFrameCount = 2
dot11FailedCount                    = 3
dot11RetryCount                     = 4
dot11MultipleRetryCount             = 5
dot11FrameDuplicateCount            = 6
dot11RTSSuccessCount                = 7
dot11RTSFailureCount                = 8
dot11ACKFailureCount                = 9
dot11ReceivedFragmentCount          = 10
dot11MulticastReceivedFrameCount    = 11
dot11FCSErrorCount                  = 12
dot11TransmittedFrameCount          = 13
 
   
 
   

Related Commands

config client ccx stats-request

show client detail

To display detailed information for a client on a Cisco lightweight access point, use the show client detail command.


Note The show client ap command may list the status of automatically disabled clients. Use the show exclusionlist command to view clients on the exclusion list (blacklisted).


show client detail mac_address

Syntax Description

show

Displays configurations.

client

802.11a or 802.11b/g client.

detail

Connectivity information.

mac_address

MAC address of the specific client.


Defaults

None.

Examples

> show client detail 00:0c:41:07:33:a6
 
   
Client MAC Address............................... 00:16:36:40:ac:58
Client Username.................................. N/A
Client State..................................... Associated
Client NAC OOB State............................. QUARANTINE
Guest LAN Id..................................... 1
IP Address....................................... Unknown
Session Timeout.................................. 0
QoS Level........................................ Gold
Diff Serv Code Point (DSPC)...................... disabled
Mobility State................................... Local
Internal Mobility State.......................... apfMsMmInitial
Security Policy Completed........................ No
Policy Manager State............................. WEBAUTH_REQD
Policy Manager Rule Created...................... Yes
NPU Fast Fast Notified........................... Yes
Last Policy Manager State........................ WEBAUTH_REQD
Client Entry Create Time......................... 460 seconds
Interface........................................ wired-guest
VLAN............................................. 236
Quarantine VLAN.................................. 0
Client Statistics:
	Number of Bytes Received..................... 0
	Number of Bytes Sent......................... 0
	Number of Packets Received................... 0
	Number of Packets Sent....................... 0
	Number of EAP Id Request Msg Timeouts........ 0
	Number of EAP Id Request Msg Failures........ 0
	Number of EAP Request Msg Timeouts........... 2
	Number of EAP Request Msg Failures........... 1
	Number of EAP Key Msg Timeouts............... 0
	Number of EAP Key Msg Failures............... 0
	Number of Policy Errors...................... 0
	Radio Signal Strength Indicator.............. Unavailable
	Signal to Noise Ratio........................ Unavailable
...

Related Commands

show client ap

show client summary

show client username

show exclusionlist

show client location-calibration summary

To display client location calibration summary information, use the show client lcoation-calibration summary command.

show client location-calibration summary

Syntax Description

This command has no arguments or keywords.

Defaults

This command has no defaults.

Command History

Release
Modification

4.1

This command was introduced.


Examples

> show client location-calibration summary
 
   
MAC Address Inerval 
----------- ----------
10:10:10:10:10:10 60
21:21:21:21:21:21 45

Related Commands

None.

show client report

To display detail client nformation, use the show client detail command.

show client detail

Syntax Description

This command has no arguments or keywords.

Defaults

This command has no defaults.

Command History

Release
Modification

4.1

This command was introduced.


Examples

> show client detail 00:14:6c:0a:57:77
 
   
Client MAC Address............................... 00:14:6c:0a:57:77
Client Username ................................. N/A
AP MAC Address................................... 00:0b:85:0e:19:a0
Client State..................................... Diagnostics
Wireless LAN Id.................................. 1
BSSID............................................ 00:0b:85:0e:19:a0
Channel.......................................... 40
IP Address....................................... 1.100.150.53
Association Id................................... 1
Authentication Algorithm......................... Open System
Reason Code...................................... 0
Status Code...................................... 0
Session Timeout.................................. 1800
Client CCX version............................... CCXv5
Re-Authentication Timeout........................ 1800
QoS Level........................................ Silver
 
   

Related Commands

None.

show client summary

To display a summary of clients associated with a Cisco lightweight access point, use the show client summary command.


Note The show client ap command may list the status of automatically disabled clients. Use the show exclusionlist command to view clients on the exclusion list (blacklisted).


show client summary

Syntax Description

show

Displays configurations.

client

802.11a or 802.11b/g client.

summary

All attached clients.


Defaults

None.

Examples

> show client summary
 
   
Number of Clients................................ 24
 
   
MAC Address        AP Name            Status         WLAN  Auth  Protocol  Port
-----------------  -----------------  -------------  ----  ----  --------  ----
 
   
xx:xx:xx:xx:xx:xx  AP02               Probing        N/A   No    802.11a   1
xx:xx:xx:xx:xx:xx  AP02               Probing        N/A   No    802.11a   1
xx:xx:xx:xx:xx:xx  AP02               Probing        N/A   No    802.11b   1
xx:xx:xx:xx:xx:xx  AP02               Probing        N/A   No    802.11a   1
xx:xx:xx:xx:xx:xx  AP02               Probing        N/A   No    802.11b   1
xx:xx:xx:xx:xx:xx  AP02               Probing        N/A   No    802.11b   1
xx:xx:xx:xx:xx:xx  AP02               Probing        N/A   No    802.11b   1
xx:xx:xx:xx:xx:xx  AP02               Probing        N/A   No    802.11b   1
xx:xx:xx:xx:xx:xx  AP02               Probing        N/A   No    802.11b   1
xx:xx:xx:xx:xx:xx  AP02               Probing        N/A   No    802.11a   1
xx:xx:xx:xx:xx:xx  AP02               Probing        N/A   No    802.11a   1
xx:xx:xx:xx:xx:xx  AP02               Probing        N/A   No    802.11b   1
xx:xx:xx:xx:xx:xx  AP02               Probing        N/A   No    802.11a   1
xx:xx:xx:xx:xx:xx  AP02               Probing        N/A   No    802.11a   1
 
   
Number of Clients................................ 2

Related Commands

None.

show client summary guest-lan

To display the active wired guest LAN clients, use the show client summary guest-lan command.

show client summary guest-lan

Syntax Description

show

Displays configurations.

client

802.11a or 802.11b/g client.

summary

All attached clients.

guest-LAN

Indicates the active wired guest LAN.


Defaults

None.

Examples

> show client summary
 
   
Number of Clients................................ 1
MAC Address        AP Name      Status         WLAN   Auth   Protocol  Port Wired
----------- 			 	 --------- 	 	 	 ------- 	 	 	 	 ----- 	 ---- 	 --------- 	---- 	-----
00:16:36:40:ac:58 	N/A 	 	 			 	 	Associated	 	 		1	 No 		802.3 	 		1 	Yes
 
   

show client username

To display client data by username, use the show client username command.

show client username username

Syntax Description

show

Displays configurations.

client

Displays client data.

username

Cisco radio.

username

Client's username.


Defaults

None.

Examples

> show client username IT_007
 
   
MAC Address        AP ID   Status         WLAN Id    Authenticated
-----------------  ------  -------------  ---------  -------------
xx:xx:xx:xx:xx:xx  1       Associated     1          No

Related Commands

show client ap

show client detail

show client summary

show country

To display the configured country and the radio types supported, use the show country channels command.

show country

This command has no arguments or keywords.

Defaults

This command has no defaults.

Command History

Release
Modification

4.1

This command was introduced.


Examples

> show country
 
   
Configured Country............................. United States
Configured Country Codes
US  - United States............................. 802.11a / 802.11b / 802.11g
 
   

Related Commands

config country

display country supported

show country channels

show country channels

To display the radio channels supported in the configured country, use the show country channels command.

show country channels

Syntax Description

This command has no arguments or keywords.

Defaults

This command has no defaults.

Command History

Release
Modification

4.1

This command was introduced.


Examples

> show country channels
 
   
Configured Country............................. United States
      KEY: * = Channel is legal in this country and may be configured manually.
           A = Channel is the Auto-RF default in this country.
           . = Channel is not legal in this country.
           C = Channel has been configured for use by Auto-RF.
           x = Channel is available to be configured for use by Auto-RF.
---------:+-+-+-+-+-+-+-+-+-+-+-+-+-+-
802.11BG :
Channels :                   1 1 1 1 1
         : 1 2 3 4 5 6 7 8 9 0 1 2 3 4
---------:+-+-+-+-+-+-+-+-+-+-+-+-+-+-
     US  : A * * * * A * * * * A . . .
---------:+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-
 802.11A :                         1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Channels : 3 3 3 4 4 4 4 4 5 5 6 6 0 0 0 1 1 2 2 2 3 3 4 4 5 5 6 6
         : 4 6 8 0 2 4 6 8 2 6 0 4 0 4 8 2 6 0 4 8 2 6 0 9 3 7 1 5
---------:+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-
     US  : . A . A . A . A A A A A * * * * * . . . * * * A A A A *
---------:+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-

Related Commands

config country

display country supported

show country

show country supported

To display a list of the supported country options, use the show country supported command.

show country supported

Syntax Description

This command has no arguments or keywords.

Defaults

This command has no defaults.

Command History

Release
Modification

4.1

This command was introduced.


Examples

> show country supported
CConfigured Country............................. United States
Supported Country Codes
AR  - Argentina................................. 802.11a / 802.11b / 802.11g
AT  - Austria................................... 802.11a / 802.11b / 802.11g
AU  - Australia................................. 802.11a / 802.11b / 802.11g
BR  - Brazil.................................... 802.11a / 802.11b / 802.11g
BE  - Belgium................................... 802.11a / 802.11b / 802.11g
BG  - Bulgaria.................................. 802.11a / 802.11b / 802.11g
CA  - Canada.................................... 802.11a / 802.11b / 802.11g
CH  - Switzerland............................... 802.11a / 802.11b / 802.11g
CL  - Chile.....................................           802.11b / 802.11g
CN  - China..................................... 802.11a / 802.11b / 802.11g
CO  - Colombia..................................           802.11b / 802.11g
CY  - Cyprus.................................... 802.11a / 802.11b / 802.11g
CZ  - Czech Republic............................ 802.11a / 802.11b
DE  - Germany................................... 802.11a / 802.11b / 802.11g
DK  - Denmark................................... 802.11a / 802.11b / 802.11g
EE  - Estonia................................... 802.11a / 802.11b / 802.11g
ES  - Spain..................................... 802.11a / 802.11b / 802.11g
FI  - Finland................................... 802.11a / 802.11b / 802.11g
FR  - France.................................... 802.11a / 802.11b / 802.11g
GB  - United Kingdom............................ 802.11a / 802.11b / 802.11g
GI  - Gibraltar................................. 802.11a / 802.11b / 802.11g
GR  - Greece.................................... 802.11a / 802.11b / 802.11g
HK  - Hong Kong................................. 802.11a / 802.11b / 802.11g
HU  - Hungary................................... 802.11a / 802.11b / 802.11g
ID  - Indonesia.................................           802.11b / 802.11g
IE  - Ireland................................... 802.11a / 802.11b / 802.11g
IN  - India..................................... 802.11a / 802.11b / 802.11g
IL  - Israel.................................... 802.11a / 802.11b / 802.11g
ILO - Israel (outdoor)..........................           802.11b / 802.11g
IS  - Iceland................................... 802.11a / 802.11b / 802.11g
IT  - Italy..................................... 802.11a / 802.11b / 802.11g
JP  - Japan (J)................................. 802.11a / 802.11b / 802.11g
J2  - Japan 2(P)................................ 802.11a / 802.11b / 802.11g
J3  - Japan 3(U)................................ 802.11a / 802.11b / 802.11g
KR  - Korea Republic (C)........................ 802.11a / 802.11b / 802.11g
KE  - Korea Extended (K)........................ 802.11a / 802.11b / 802.11g
LI  - Liechtenstein............................. 802.11a / 802.11b / 802.11g
LT  - Lithuania................................. 802.11a / 802.11b / 802.11g
LU  - Luxembourg................................ 802.11a / 802.11b / 802.11g
LV  - Latvia.................................... 802.11a / 802.11b / 802.11g
MC  - Monaco.................................... 802.11a / 802.11b / 802.11g
MT  - Malta..................................... 802.11a / 802.11b / 802.11g
MX  - Mexico.................................... 802.11a / 802.11b / 802.11g
MY  - Malaysia.................................. 802.11a / 802.11b / 802.11g
NL  - Netherlands............................... 802.11a / 802.11b / 802.11g
NZ  - New Zealand............................... 802.11a / 802.11b / 802.11g
NO  - Norway.................................... 802.11a / 802.11b / 802.11g
PA  - Panama....................................           802.11b / 802.11g
PE  - Peru......................................           802.11b / 802.11g
PH  - Philippines............................... 802.11a / 802.11b / 802.11g
PL  - Poland.................................... 802.11a / 802.11b / 802.11g
PT  - Portugal.................................. 802.11a / 802.11b / 802.11g
RU  - Russian Federation........................ 802.11a / 802.11b / 802.11g
RO  - Romania................................... 802.11a / 802.11b / 802.11g
SA  - Saudi Arabia.............................. 802.11a / 802.11b / 802.11g
SE  - Sweden.................................... 802.11a / 802.11b / 802.11g
SG  - Singapore................................. 802.11a / 802.11b / 802.11g
SI  - Slovenia.................................. 802.11a / 802.11b / 802.11g
SK  - Slovak Republic........................... 802.11a / 802.11b / 802.11g
TH  - Thailand..................................           802.11b / 802.11g
TR  - Turkey....................................           802.11b / 802.11g
TW  - Taiwan.................................... 802.11a / 802.11b / 802.11g
UA  - Ukraine................................... 802.11a / 802.11b / 802.11g
US  - United States............................. 802.11a / 802.11b / 802.11g
USL - United States (Legacy).................... 802.11a / 802.11b / 802.11g
USX - United States (US + chan165).............. 802.11a / 802.11b / 802.11g
VE  - Venezuela.................................           802.11b / 802.11g
ZA  - South Africa.............................. 802.11a / 802.11b / 802.11g
 
   

Related Commands

config country

display country channels

show country

show cpu

To display current WLAN Controller CPU usage information, use the show cpu command.

show cpu

Syntax Description

This command has no arguments or keywords.

Defaults

None.

Examples

> show cpu
 
   
Current CPU load: 2.50%

Related Commands

show sysinfo

show custom-web

To display web authentication customization information, use the show custom-web command.

show custom-web

Syntax Description

This command has no arguments or keywords.

Defaults

None.

Examples

> show custom-web
 
   
Radius Authentication Method..................... PAP
Cisco Logo....................................... Enabled
CustomLogo....................................... None
Custom Title..................................... None
Custom Message................................... None
Custom Redirect URL.............................. None
External web authentication Mode................. Disabled
External web authentication URL.................. None

Related Commands

config custom-web

show database summary

To display the maximum number of entries in the database, use the show database summary command.

show database summary

Syntax Description

This command has no arguments or keywords.

Defaults

This command has no defaults.

Command History

Release
Modification

4.1

This command was introduced.


Examples

> show database summary
 
   
Current Max database entries..................... 512
Max database entries on next reboot.............. 512
 
   

Related Commands

config database size

show debug

Use the show debug command to determine if MAC address and other flag debugging is enabled or disabled.

show debug

Syntax Description

show

Displays configurations.

debug

MAC address debugging.


Defaults

None.

Examples

> show debug
 
   
MAC debugging............................... disabled
 
   
Debug Flags Enabled:
  arp error enabled.
  bcast error enabled.

Related Commands

debug mac

show dhcp

Use the show dhcp command to display the internal DHCP server configuration.

show dhcp {leases | summary | scope}

Syntax Description

show dhcp

Displays internal DHCP server configuration information.

leases

Enter leases to display allocated DHCP leases.

summary

Enter summary to display DHCP summary information.

scope

Enter the name of a scope to display the DHCP information for that scope.


Defaults

None.

Examples

> show dhcp leases
 
   
No leases allocated.
 
   
> show dhcp summary
 
   
Scope Name           Enabled           Address Range
003                    No            0.0.0.0 -> 0.0.0.0
 
   
> show dhcp 003
 
   
Enabled....................................... No
Lease Time.................................... 0
Pool Start.................................... 0.0.0.0
Pool End...................................... 0.0.0.0
Network....................................... 0.0.0.0
Netmask....................................... 0.0.0.0
Default Routers............................... 0.0.0.0 0.0.0.0 0.0.0.0
DNS Domain.................................... 
DNS........................................... 0.0.0.0 0.0.0.0 0.0.0.0
Netbios Name Servers.......................... 0.0.0.0 0.0.0.0 0.0.0.0

Related Commands

config dhcp

show dhcp proxy

Use the show dhcp proxy command to display the status of DHCP proxy handling.

show dhcp proxy

Syntax Description

show dhcp proxy

Displays the status of DHCP proxy handling.


Defaults

None.

Examples

> show dhcp proxy 

DHCP Proxy Behaviour: enabled

Related Commands

config dhcp proxy

show eventlog

Use the show eventlog command to display the event log.

show eventlog

Syntax Description

show

Displays configurations.

eventlog

System events.


Defaults

None.

Examples

> show eventlog
                                             Time
       File     Line TaskID   Code        d  h  m  s
EVENT> bootos.c  788 125CEBCC AAAAAAAA    0  0  0  6
EVENT> bootos.c  788 125CEBCC AAAAAAAA    0  0  0  6
EVENT> bootos.c  788 125C597C AAAAAAAA    0  0  0  6
EVENT> bootos.c  788 125C597C AAAAAAAA    0  0  0  6
EVENT> bootos.c  788 125C597C AAAAAAAA    0  0  0  6
EVENT> bootos.c  788 125C597C AAAAAAAA    0  0  0  6
EVENT> bootos.c  788 125C597C AAAAAAAA    0  0  0  6
EVENT> bootos.c  788 125C597C AAAAAAAA    0  0  0  6
EVENT> bootos.c  788 1216C36C AAAAAAAA    0  0  0  6
EVENT> bootos.c  788 1216C36C AAAAAAAA    0  0  0  6
EVENT> bootos.c  788 1216C36C AAAAAAAA    0  0  0  6
EVENT> bootos.c  788 1216C36C AAAAAAAA    0  0  0 11

Related Commands

show msglog

show exclusionlist

To display a summary of all clients on the manual exclusion list (blacklisted) from associating with this Cisco Wireless LAN controller, use the show exclusionlist command. A list containing each manually Excluded MAC address is displayed.

show exclusionlist

Syntax Description

show

Displays configurations.

exclusionist

Manual exclusion list.


Defaults

None.

Examples

> show exclusionlist
 
   
MAC Address              Description
-----------------------  --------------------------------
xx:xx:xx:xx:xx:xx        Disallowed Client

Related Commands

config exclusionlist add

config exclusionlist delete

config exclusionlist description

show client

show guest-lan

To display the configuration of a specific wired guest LAN, use the show guest-lan command.

show guest-lan guest_lan_id


Note Enter show guest-lan summary to view all wired guest LANs configured on the controller.


Syntax Description

show

Displays configurations.

guest-lan

Indicates the active wired guest LAN.


Defaults

None.

Examples

> show guest-lan 2
 
   
Guest LAN Identifier........................... 1
Profile Name................................... guestlan
Network Name (SSID)............................ guestlan
Status......................................... Enabled
AAA Policy Override............................ Disabled
Number of Active Clients....................... 1
Exclusionlist Timeout.......................... 60 seconds
Session Timeout................................ Infinity
Interface...................................... wired
Ingress Interface.............................. wired-guest
WLAN ACL....................................... unconfigured
DHCP Server.................................... 10.20.236.90
DHCP Address Assignment Required............... Disabled
Quality of Service............................. Silver (best effort)
Security
	Web Based Authentication................... Enabled
	ACL........................................ Unconfigured
	Web-Passthrough............................ Disabled
	Conditional Web Redirect................... Disabled
	Auto Anchor................................ Disabled
Mobility Anchor List
GLAN ID IP Address Status

Related Commands

show guest-lan summary

show client summary guest-lan

show hreap group detail

To display the details for a specific hybrid-REAP group, use the show hreap group detail command.

show hreap group detail group_name

Syntax Description

show hreap

Displays configurations.

group detail

Displays details of the hybrid-REAP group details.


Defaults

None.

Examples

> show hreap group detail 192.12.1.2
 
   
Number of Ap's in Group: 	1
00:0a:b8:3b:0b:c2 	 AP1200 	 	Joined
 
   
Group Radius Auth Servers:
	Primary Server Index ..................... Disabled
	Secondary Server Index ................... Disabled

Related Commands

show hreap group summary

show hreap group summary

To display the current list of hybrid-REAP groups, use the show hreap group summary command.

show hreap group summary

Syntax Description

show hreap

Displays configurations

group summary

Displays a summary of the hybrid-REAP group.


Defaults

None.

Examples

> show hreap group summary
 
   
HREAP Group Summary: 	Count 1
 
   
Group Name	 				 	# APs
Group 1 						1

Related Commands

show hreap group detail

show ike

Use the show ike command to display active IKE SAs.

show ike {brief | IP_or_MAC_address}

Syntax Description

show

Command action.

ike

Displays active IKE SAs.

brief

List of all active IKE SAs.

IP_or_MAC_address

IP or MAC address of active IKE SA.


Defaults

None.

Examples

> show ike

Related Commands

None.

show interface

Use the show interface command to display details of the system interfaces.

show interface {summary | detailed interface_name}

Syntax Description

show interface

Command action

summary

Displays a summary of the local interfaces.

detailed

Displays detailed interface information.

interface_name

Identifies interface name for detailed display


Defaults

None.

Examples

> show interface summary
 
   
Interface Name       Port 	Vlan Id    IP Address        Type    Ap Mgr Guest
-------------------  ----   ---------   ----------------  ------ ------ ------
 
   
ap-manager           1 	 	 	 untagged		 	 	 xxx.xxx.xxx.xxx  Static   Yes 	No
management           1 	 	 	 	untagged    xxx.xxx.xxx.xxx  Static   No 	No
service-port         N/A     N/A 	 	 	 	 xxx.xxx.xxx.xxx  Static   No 	 No
virtual              N/A     N/A 	 	 	 	 xxx.xxx.xxx.xxx  Static   No	 	 No

Note The interface name of the wired guest LAN in this example is wired-guest and its VLAN ID is 236.


 
   
> show interface detailed management
 
   
Interface Name................................... management
MAC Address...................................... 00:0b:85:32:ab:60
IP Address....................................... 1.100.49.30
IP Netmask....................................... 255.255.255.0
IP Gateway....................................... 1.100.49.1
VLAN............................................. 149
Active Physical Port............................. 1
Primary Physical Port............................ 1
Backup Physical Port............................. Unconfigured
Primary DHCP Server.............................. 1.100.2.15
Secondary DHCP Server............................ Unconfigured
ACL.............................................. Unconfigured
AP Manager....................................... No

Note Some WLAN controllers may have only one physical port listed because they have only one physical port.


Related Commands

config interface

show inventory

To display a physical inventory of the Cisco Wireless LAN controller, use the show inventory command.

show inventory

Syntax Description

show

Displays configurations.

inventory

Physical Cisco Wireless LAN controller configuration.


Defaults

None.

Examples

> show inventory
 
   
Switch Description............................... Cisco Controller
Machine Model.................................... WLC4404-100
Serial Number.................................... FLS0923003B
Burned-in MAC Address............................ 00:0B:85:32:AB:60
Crypto Accelerator 1............................. Absent
Crypto Accelerator 2............................. Absent
Power Supply 1................................... Absent
Power Supply 2................................... Present, OK

Note Some wireless LAN controllers may have no crypto accelerator (VPN termination module) or power supplies listed because they have no provisions for VPN termination modules or power supplies.


Related Commands

show sysinfo

show ipsec

Use the show ipsec command to display active IPSec SAs.

show ipsec {brief | IP_or_MAC_address}

Syntax Description

show

Command action.

ipsec

Displays active IPSec SAs

{brief |
IP_or_MAC_address}

Enter brief to display active IPSec SAs.

Enter the IP address of MAC address of an IPSec SA.


Defaults

None.

Examples

> show ipsec brief

Related Commands

None.

show known ap

To display known Cisco lightweight access point information, use the show known ap command.

show known ap {summary | detailed MAC}

Syntax Description

show

Displays configurations.

known ap

Known Cisco lightweight access point information.

summary

Displays a list of all known access points.

detailed

Provides detailed information for all known access points.

MAC

MAC address of the known AP


Defaults

None.

Examples

> show known ap summary
 
   
MAC Address         State        # APs  # Clients   Last Heard
-----------         -----------  -----   --------   -----------------

Related Commands

config ap

show l2tp

To display L2TP sessions, use the show l2tp command.

show l2tp {summary | ip_address}

Syntax Description

show l2tp

Displays configurations.

summary

Displays all L2TP sessions.

ip_address

Displays an L2TP session.


Defaults

None.

Examples

> show l2tp summary
 
   
LAC_IPaddr LTid LSid RTid RSid ATid ASid State
---------- ---- ---- ---- ---- ---- ---- -----

Related Commands

None.

show lag summary

To display the current LAG status, use the show lag summary command.

show lag summary

Syntax Description

This command has no arguments or keywords.

Defaults

This command has no defaults.

Command History

Release
Modification

4.1

This command was introduced.


Examples

> show lag summary
 
   
LAG Enabled
 
   

Related Commands

config lag

show ldap

To display the detailed LDAP server information, use the show ldap command.

show ldap index

Syntax Description

index

LDAP server index. Valid values are from 1 to 17.


Defaults

None.

Examples

> show ldap 1
Server Index..................................... 1
Address.......................................... 2.3.1.4
Port............................................. 389
Enabled.......................................... Yes
User DN.......................................... name1
User Attribute................................... attr1
User Type........................................ username1
Retransmit Timeout............................... 3 seconds
Bind Method ..................................... Anonymous
 
   

Related Commands

config ldap

show ldap statistics

show ldap summary

show ldap statistics

To display the detailed LDAP server information, use the show ldap statistics command.

show ldap statistics

Syntax Description

This command has no arguments or keywords.

Defaults

None.

Examples

> show ldap statistics
 
   
Server Index..................................... 1
Server statistics:
  Initialized OK................................. 0
  Initialization failed.......................... 0
  Initialization retries......................... 0
  Closed OK...................................... 0
Request statistics:
  Received....................................... 0
  Sent........................................... 0
  OK............................................. 0
  Success........................................ 0
  Authentication failed.......................... 0
  Server not found............................... 0
  No received attributes......................... 0
  No passed username............................. 0
  Not connected to server........................ 0
  Internal error................................. 0
  Retries........................................ 0
 
   
Server Index..................................... 2
...

Related Commands

config ldap

show ldap

show ldap summary

show ldap summary

To display the current LDAP status, use the show ldap summary command.

show ldap summary

Syntax Description

This command has no arguments or keywords.

Defaults

This command has no defaults.

Examples

> show ldap summary
 
   

Idx Server Address Port Enabled

--- --------------- ---- -------

1 2.3.1.4 389 Yes

2 10.10.20.22 389 Yes

Related Commands

config ldap

show ldap

show ldap statistics

show load-balancing

To display the status of the load-balancing feature, use the show load-balancing command.

show load-balancing

Syntax Description

show

Displays configurations.

load-balancing

Displays the load-balancing status.


Defaults

None.

Examples

> show load-balancing
 
   
Aggressive Load Balancing...................... Enabled
Aggressive Load Balancing Window............... 0 clients

Related Commands

config load-balancing

show local-auth certificates

This command is used to display local authentication certificate information:

show local-auth certificates

Syntax Description

This command has no arguments or keywords.

Defaults

This command has no defaults.

Command History

Release
Modification

4.1

This command was introduced.


Examples

> show local-auth certificates 

Certificates available for Local EAP authentication: 
 
Certificate issuer .............................. vendor
CA certificate:
Subject: C=AU, ST=NSW, L=Sydney, O=Cisco Systems 
OU=WNBU Sydney, CN=wnbu-syd-acs-a.cisco.com 
Issuer: C=AU, ST=NSW, L=Sydney, O=Cisco Systems 
OU=WNBU Sydney, CN=wnbu-syd-acs-a.cisco.com 
Valid: 2005 Jun 15th, 04:53:49 GMT to 2008 Jun 15th, 05:03:34 GMT 
Device certificate: 
Subject: MAILTO=test@test.net, C=AU, ST=NSW, L=Sydney 
O=Cisco Systems, OU=WNBU Sydney, CN=concannon 
Issuer: C=AU, ST=NSW, L=Sydney, O=Cisco Systems 
OU=WNBU Sydney, CN=wnbu-syd-acs-a.cisco.com 
Valid: 2006 Aug 9th, 05:14:16 GMT to 2007 Aug 9th, 05:24:16 GMT
 
   
Certificate issuer .............................. cisco
CA certificate:
Subject: C=US, ST=California, L=San Jose, O=airespace Inc 
OU=none, CN=ca, MAILTO=support@airespace.com 
Issuer: C=US, ST=California, L=San Jose, O=airespace Inc 
OU=none, CN=ca, MAILTO=support@airespace.com 
Valid: 2003 Feb 12th, 23:38:55 GMT to 2012 Nov 11th, 23:38:55 GMT 
Device certificate: 
Subject: C=US, ST=California, L=San Jose, O=airespace Inc 
CN=000b85335340, MAILTO=support@airespace.com 
Issuer: C=US, ST=California, L=San Jose, O=airespace Inc 
OU=none, CN=ca, MAILTO=support@airespace.com 
Valid: 2005 Feb 22nd, 10:52:58 GMT to 2014 Nov 22nd, 10:52:58 GMT
 
   
Certificate issuer .............................. legacy
CA certificate:
Subject: C=US, ST=California, L=San Jose, O=airespace Inc 
OU=none, CN=ca, MAILTO=support@airespace.com 
Issuer: C=US, ST=California, L=San Jose, O=airespace Inc 
OU=none, CN=ca, MAILTO=support@airespace.com 
Valid: 2003 Feb 12th, 23:38:55 GMT to 2012 Nov 11th, 23:38:55 GMT 
 
Device certificate: 
Subject: C=US, ST=California, L=San Jose, O=airespace Inc 
CN=000b85335340, MAILTO=support@airespace.com 
Issuer: C=US, ST=California, L=San Jose, O=airespace Inc 
OU=none, CN=ca, MAILTO=support@airespace.com 
Valid: 2005 Feb 22nd, 10:52:58 GMT to 2014 Nov 22nd, 10:52:58 GMT
 
   

Related Commands

config local-auth eap-profile

show local-auth config

This command is used to display local authentication configuration information:

show local-auth config

Syntax Description

This command has no arguments or keywords.

Defaults

This command has no defaults.

Command History

Release
Modification

4.1

This command was introduced.


Examples

> show local-auth config
User credentials database search order:
Primary ................................... Local DB
 
   
Configured EAP profiles:
Name ...................................... fast-test
Certificate issuer .................... default
Enabled methods ....................... fast
Configured on WLANs ................... 2
 
   
EAP Method configuration:
EAP-TLS:
Certificate issuer .................... default
Peer verification options:
	Check against CA certificates ..... Enabled
	Verify certificate CN identity .... Disabled
	Check certificate date validity ... Enabled
EAP-FAST:
TTL for the PAC ....................... 3 600
Initial client message ................ <none>
Local certificate required ............ No
Client certificate required ........... No
Vendor certificate required ........... No
Anonymous provision allowed ........... Yes
Authenticator ID ...................... 7b7fffffff0000000000000000000000
Authority Information ................. Test
 
   
EAP Profile.................................... tls-prof
Enabled methods for this profile .......... tls
Active on WLANs ........................... 1 3
EAP Method configuration:
EAP-TLS:
Certificate issuer used ............... cisco
Peer verification options:
	Check against CA certificates ..... disabled
	Verify certificate CN identity .... disabled
	Check certificate date validity ... disabled
 
   

Related Commands

config local-auth eap-profile

config local-auth method fast

show local-auth statistics

This command is used to display local EAP authentication statistics:

show local-auth statistics

Syntax Description

This command has no arguments or keywords.

Defaults

This command has no defaults.

Command History

Release
Modification

4.1

This command was introduced.


Examples

> show local-auth statistics
 
   
Local EAP authentication DB statistics:
Requests received ............................... 14
Responses returned .............................. 14
Requests dropped (no EAP AVP) ................... 0
Requests dropped (other reasons) ................ 0
Authentication timeouts ......................... 0
 
   
Authentication statistics:
  Method          Success         Fail
  ------------------------------------
  Unknown               0            0
  LEAP                  0            0
  EAP-FAST              2				 	 	 	 	 	 0
  EAP-TLS               0            0
  PEAP                  0            0
 
   
Local EAP credential request statistics:
Requests sent to LDAP DB ........................ 0
Requests sent to File DB ........................ 2
Requests failed (unable to send) ................ 0
Authentication results received:
  Success ....................................... 2
  Fail .......................................... 0
Certificate operations:
Local device certificate load failures .......... 0
Total peer certificates checked ................. 0
Failures:
  CA issuer check ............................... 0
  CN name not equal to identity ................. 0
  Dates not valid or expired .................... 0

Related Commands

clear stats local-auth

config local-auth eap-profile

config local-auth method fast

show location

To display location system information, use the show location command.

show location [detail mac_address | summary]

Syntax Description

detail

Displays detailed location information

mac_address

Specifies the MAC address of a client.

summary

Displays summary location information.


Defaults

This command has no defaults.

Command History

Release
Modification

4.1

This command was introduced.


Examples

> show location summary
 Location Summary
 
   
 Algorithm used:                 Average
 Client
        RSSI expiry timeout:     5 sec
        Half life:               0 sec
        Notify Threshold:        0 db
 Calibrating Client
        RSSI expiry timeout:     5 sec
        Half life:               0 sec
 Rogue AP
        RSSI expiry timeout:     5 sec
        Half life:               0 sec
        Notify Threshold:        0 db
 RFID Tag
        RSSI expiry timeout:     5 sec
        Half life:               0 sec
        Notify Threshold:        0 db

Related Commands

clear location rfid

config location

show location statistics rfid

To see any RFID-related errors, use the show location statistics rfid command.

show location statistics rfid

Syntax Description

This command has no arguments or keywords.

Defaults

This command has no defaults.

Examples

> show location statistics rfid
 
   
RFID Statistics
 
Database Full :         0        Failed Delete:         0
Null Bufhandle:         0        Bad Packet:            0
Bad LWAPP Data:         0        Bad LWAPP Encap:       0
Off Channel:            0        Bad CCX Version:       0
Bad AP Info :           0 
Above Max RSSI:         0        Below Max RSSI:        0
Invalid RSSI:           0        Add RSSI Failed:       0
Oldest Expired RSSI:    0        Smallest Overwrite:    0

Related Commands

clear location statistics rfid

show logging

To display the syslog facility logging parameters and buffer contents, use the show logging command.

show logging

Syntax Description

show

Displays configurations.

logging

Current parameters and buffer content details.


Defaults

None.

Examples

> show logging
 
   
Logging to buffer :
- Logging of system messages to buffer :
 - Logging filter level.......................... errors
 - Number of system messages logged.............. 67227
 - Number of system messages dropped............. 21136
- Logging of debug messages to buffer ........... Disabled
 - Number of debug messages logged............... 0
 - Number of debug messages dropped.............. 0
Logging to console :
- Logging of system messages to console :
 - Logging filter level.......................... errors
 - Number of system messages logged.............. 0
 - Number of system messages dropped............. 88363
- Logging of debug messages to console .......... Enabled
 - Number of debug messages logged............... 0
 - Number of debug messages dropped.............. 0
Logging to syslog :
- Syslog facility................................ local0
- Logging of system messages to syslog :
 - Logging filter level.......................... errors
 - Number of system messages logged.............. 67227
--More-- or (q)uit
 - Number of system messages dropped............. 21136
- Logging of debug messages to syslog ........... Disabled
 - Number of debug messages logged............... 0
 - Number of debug messages dropped.............. 0
- Number of remote syslog hosts.................. 0
  - Host 0....................................... Not Configured
  - Host 1....................................... Not Configured
  - Host 2....................................... Not Configured
Logging of traceback............................. Disabled
Logging of process information................... Disabled
Logging of source file informational............. Enabled
Timestamping of messages.........................
- Timestamping of system messages................ Enabled
 - Timestamp format.............................. Date and Time
- Timestamping of debug messages................. Enabled
 - Timestamp format.............................. Date and Time
 
   
 Logging buffer (67227 logged, 21136 dropped)
 
   
*Apr 03 09:48:01.728: %MM-3-INVALID_PKT_RECVD: mm_listen.c:5508 Received an invalid
packet from 1.100.163.51. Source member:0.0.0.0. source member unknown.
*Apr 03 09:47:34.194: %LWAPP-3-DECODE_ERR: spam_lrad.c:1271 Error decoding discovery
request from AP 00:13:5f:0e:d4:20
*Apr 03 09:47:34.194: %LWAPP-3-DISC_OTAP_ERR: spam_lrad.c:5554 Ignoring OTAP discovery 
request from AP 00:13:5f:0e:d4:20, OTAP is disabled
Previous message occurred 2 times.
 
   

Related Commands

config logging syslog host

config logging syslog facility

config logging syslog level

show loginsession

To display the existing sessions, use the show loginsession command.

show loginsession

Syntax Description

show

Displays configurations.

loginsession

Current session details.


Defaults

None.

Examples

> show loginsession
 
   
ID    User Name     Connection From   Idle Time    Session Time
-- ---------------  ---------------  ------------  ------------
00 admin            EIA-232          00:00:00      00:19:04

Related Commands

config loginsession close

show lwapp reap association

To view the list of clients associated to an access point and their SSIDs, use the show lwapp reap association command.

show lwapp reap assocation

Syntax Description

This command has no arguments or keywords.

Defaults

This command has no defaults.

Examples

> show lwapp reap association

Related Commands

show lwap reap status

show lwapp reap status

To view the status of the hybrid-REAP access point (connected or standalone), use the show lwapp reap status command.

show lwapp reap status

Syntax Description

This command has no arguments or keywords.

Defaults

This command has no defaults.

Examples

> show lwapp reap status

Related Commands

show lwap reap association

show macfilter

To display the MAC filter parameters, use the show macfilter command. The MAC delimiter (none, colon, or hyphen) for MAC addresses sent to RADIUS servers is displayed. The MAC filter table lists the clients that are always allowed to associate with a wireless LAN.

show macfilter {summary | detail MAC}

Syntax Description

show

Displays configurations.

macfilter

Filter details.

summary

Displays a summary of all MAC filter entries.

detail MAC

Detailed display of a MAC filter entry.


Defaults

None.

Examples

> show macfilter detail xx:xx:xx:xx:xx:xx
 
   
MAC Address...................................... xx:xx:xx:xx:xx:xx
WLAN Identifier.................................. Any
Interface Name................................... management
Description...................................... RAP
 
   
> show macfilter summary
 
   
MAC Filter RADIUS Compatibility mode............. Cisco ACS
MAC Filter Delimiter............................. None
 
   
Local Mac Filter Table
 
   
MAC Address               WLAN Id          Description
-----------------------   --------------   --------------------------------
xx:xx:xx:xx:xx:xx         Any              RAP
xx:xx:xx:xx:xx:xx         Any              PAP2 (2nd hop)
xx:xx:xx:xx:xx:xx         Any              PAP1 (1st hop)

Related Commands

config macfilter mac-delimiter

config macfilter add

config macfilter delete

config macfilter description

config macfilter wlan-id

show mgmtuser

To display the local management user accounts on the Cisco Wireless LAN controller, use the show mgmtuser command.

show mgmtuser

Syntax Description

show

Displays configurations.

mgmtuser

List of management users.


Defaults

None.

Examples

> show mgmtuser
 
   
User Name                Permissions   Description
-----------------------  ------------  --------------------------------
admin                    read-write

Related Commands

config mgmtuser add, config mgmtuser delete, config mgmtuser password

Show Mobility Commands

Use the show mobility commands to display mobility settings.

show mobility anchor

To display the wireless LAN anchor list for the Cisco Wireless LAN controller mobility groups, use the show mobility anchor command.

show mobility anchor

Syntax Description

show

Displays configurations.

mobility

Mobility group.

anchor

Displays the mobility wireless LAN anchor list.


Defaults

None.

Examples

> show mobility anchor
 
   
Mobility Anchor Export List
 WLAN ID     IP Address

Related Commands

config mobility group discovery

config mobility group member

show mobility anchor {wlan | guest-lan}

To display a list and status of controllers configured as mobility anchors for a specific WLAN or wired guest LAN, use the show mobility anchor {wlan | guest-lan} command.

show mobility anchor {wlan | guest-lan} {wlan_id | guest_lan_id}

Syntax Description

show

Displays configurations.

mobility

Mobility group.

anchor

Displays the mobility wireless LAN anchor list.

wlan

Wireless LAN parameters.

guest-lan

Indicates the active wired guest LAN.

wlan_id

Enter a wireless LAN identifier between 1 and 16.

guest_lan_id

Guest LAN indentifier between 1 and 5 (inclusive).


Defaults

None.

Examples

> show mobility anchor {wlan | guest-lan} 5
 
   
Mobility Anchor Export List
 WLAN ID     IP Address 	Status
	1		 10.50.234.2 	 UP
	1	 	 10.50.234.6 	 UP
	2	 	 10.50.234.2	 	 UP
	2 	 	 10.50.234.3 	 CNTRL_DATA_PATH_DOWN
 
   
GLAN ID     IP Address 	Status
	1		 10.20.100.2 	 UP
	2	 	 10.20.100.3 	 UP
 
   

The status field shows one of the following values:

UP—The controller is reachable and able to pass data.

CNTRL_PATH_DOWN—The mpings failed. The controller cannot be reached through the control path and is considered failed.

DATA_PATH_DOWN—The epings failed. The controller cannot be reached and is considered failed.

CNTRL_DATA_PATH_DOWN—Both the mpings and epings failed. The controller cannot be reached and is considered failed.

Related Commands

show mobility summary

config mobility group keepalive count

config mobility group keepalive interval

config mobility group anchor add {wlan | guest-lan}

config {wlan | guest-lan} mobility anchor add

config {wlan | guest-lan} mobility anchor delete

config mobility group anchor delete {wlan | guest-lan}

show mobility statistics

To display the statistics information for the Cisco Wireless LAN controller mobility groups, use the show mobility statistics command.

show mobility statistics

Syntax Description

show

Displays configurations.

mobility

Mobility group.

statistics

Displays statistics for the mobility manager.


Defaults

None.

Examples

> show mobility statistics
 
   
Global Mobility Statistics
   Rx Errors..................................... 0
   Tx Errors..................................... 0
   Responses Retransmitted....................... 0
   Handoff Requests Received..................... 0
   Handoff End Requests Received................. 0
   State Transitions Disallowed.................. 0
   Resource Unavailable.......................... 0
Mobility Initiator Statistics
   Handoff Requests Sent......................... 0
   Handoff Replies Received...................... 0
   Handoff as Local Received..................... 2
   Handoff as Foreign Received................... 0
   Handoff Denys Received........................ 0
   Anchor Request Sent........................... 0
   Anchor Deny Received.......................... 0
   Anchor Grant Received......................... 0
   Anchor Transfer Received...................... 0
Mobility Responder Statistics
   Handoff Requests Ignored...................... 0
   Ping Pong Handoff Requests Dropped............ 0
   Handoff Requests Dropped...................... 0
   Handoff Requests Denied....................... 0
   Client Handoff as Local....................... 0
   Client Handoff as Foreign  ................... 0
   Client Handoff Inter Group ................... 0
   Anchor Requests Received...................... 0
   Anchor Requests Denied........................ 0
   Anchor Requests Granted....................... 0
   Anchor Transferred............................ 0

Related Commands

config mobility group discovery, config mobility group member

show mobility summary

To display the summary information for the Cisco Wireless LAN controller mobility groups, use the show mobility summary command.

show mobility summary

Syntax Description

show

Displays configurations.

mobility

Mobility group.

summary

Displays a summary of the mobility manager.


Defaults

None.

Examples

> show mobility summary
 
   
Symmetric Mobility Tunneling (current) .......... Disabled
Symmetric Mobility Tunneling (after reboot) ..... Disabled
Mobility Protocol Port........................... 16666
Mobility Security Mode........................... Disabled
Default Mobility Domain.......................... snmp_gui
Multicast Mode .................................. Disabled
Mobility Domain ID for 802.11r................... 0x66bd
Mobility Keepalive Interval...................... 10
Mobility Keepalive Count......................... 3
Mobility Group Members Configured................ 1
Mobility Control Message DSCP Value.............. 0
 
   
Controllers configured in the Mobility Group
MAC Address        IP Address       Group Name         Multicast IP 	Status
00:1b:d4:6b:87:20    1.100.163.70     snmp_gui         0.0.0.0 							Up

Note Some WLAN controllers may list no mobility security mode.


Related Commands

config mobility group discovery

config mobility group member

show msglog

To display the message logs written to the Cisco Wireless LAN controller database, use the show msglog command. If there are more that 15 entries you are prompted to display the messages shown in the example.

show msglog

Syntax Description

show

Displays configurations.

msglog

Shows message logs.


Defaults

None.

Examples

> show msglog
 
   
Message Log Severity Level..................... ERROR
Thu Aug  4 14:30:08 2005  [ERROR] spam_lrad.c 1540: AP 00:0b:85:18:b6:50 associated. Last 
AP failure was due to Link Failure
Thu Aug  4 14:30:08 2005  [ERROR] spam_lrad.c 13840: Updating IP info for AP 00:
0b:85:18:b6:50 -- static 0, 1.100.49.240/255.255.255.0, gtw 1.100.49.1
Thu Aug  4 14:29:32 2005  [ERROR] dhcpd.c 78: dhcp server: binding to 0.0.0.0
Thu Aug  4 14:29:32 2005  [ERROR] rrmgroup.c 733: Airewave Director: 802.11a switch group 
reset
Thu Aug  4 14:29:32 2005  [ERROR] rrmgroup.c 733: Airewave Director: 802.11bg sw
itch group reset
Thu Aug  4 14:29:22 2005  [ERROR] sim.c 2841: Unable to get link state for primary port 0 
of interface ap-manager
Thu Aug  4 14:29:22 2005  [ERROR] dtl_l2_dot1q.c 767: Unable to get USP
Thu Aug  4 14:29:22 2005  Previous message occurred 2 times
Thu Aug  4 14:29:14 2005  [CRITICAL] osapi_sem.c 794: Error!  osapiMutexTake called with 
NULL pointer: osapi_bsntime.c:927
Thu Aug  4 14:29:14 2005  [CRITICAL] osapi_sem.c 794: Error!  osapiMutexTake called with 
NULL pointer: osapi_bsntime.c:919
Thu Aug  4 14:29:14 2005  [CRITICAL] hwutils.c 1861: Security Module not found
Thu Aug  4 14:29:13 2005  [CRITICAL] bootos.c 791: Starting code...

Related Commands

show eventlog

show nac statistics

To display detailed Network Access Control (NAC) information about a Cisco Wireless LAN controller, use the show nac statistics command.

show nac statistics

Syntax Description

show

Displays configurations.

nac

Network access control.

statistics

Detailed statistics.


Defaults

None.

Examples

> show nac statistics
 
   
Server Index....................................................... 1
Server Address..................................................... xxx.xxx.xxx.xxx
Number of requests sent............................................ 0
Number of retransmissions.......................................... 0
Number of requests received........................................ 0
Number of malformed requests received.............................. 0
Number of bad auth requests received............................... 0
Number of pending requests......................................... 0
Number of timed out requests....................................... 0
Number of misc dropped request received............................ 0
Number of requests sent............................................ 0 

Related Commands

show nac acl

show nac summary

show nac summary

To display NAC summary information for a Cisco Wireless LAN controller, use the show nac summary command.

show nac summary

Syntax Description

show

Displays configurations.

nac

Network Access Control.

summary

Summary information.


Defaults

None.

Examples

> show nac summary
 
   
NAC ACL Name ...............................................
Index  Server Address                            Port     State
-----  ----------------------------------------  ----     -----
1      xxx.xxx.xxx.xxx                           13336    Enabled 

Related Commands

show nac acl

show nac statistics

show netuser

This command is used display detailed login information about a specified netuser or displays a summary information on all network users.

To show the configuration of a particular user in the local user database—show netuser detail username.

To list all users in the local user database—show netuser summary.

Syntax Description

detail

Displays detailed information on the specified network user.

username

Specifies a network username (up to 24 alphanumeric characters).

summary

Displays summary information on all network users.


Command Default

This command has no defaults.

Command History

Release
Modification

4.1

This command was revised to include detail and summary options.


Examples

> show netuser summary
 
   
Maximum logins allowed for a given user name ........Unlimited
 
   
> show netuser detail john10
 
   
User Name........................................... abc
WLAN Id............................................. Any
Lifetime............................................ Permanent
Description......................................... test user

Related Commands

config netuser maxeapuserlogin

show netuser summary

show netuser guest-roles

To display a list of the current QoS roles and their bandwidth parameters, use the show netuser guest-roles command.

show netuser guest-roles

Syntax Description

show

Displays parameters.

netuser

Local network user.

guest-role

QoS role for the guest user.


Command Default

This command has no defaults.

Examples

> show netuser guest-roles
 
   
Role Name.............................. Contractor
	Average Data Rate.................. 10
	Burst Data Rate.................... 10
	Average Realtime Rate.............. 100
	Burst Realtime Rate................ 100
 
   
Role Name.............................. Vendor
	Average Data Rate.................. unconfigured
	Burst Data Rate.................... unconfigured
	Average Realtime Rate.............. unconfigured
	Burst Realtime Rate................ unconfigured
 
   

Related Commands

config netuser maxeapuserlogin

show netuser summary

show network summary

To display the network configuration of the Cisco Wireless LAN controller, use the show network summary command.

show network summary

Syntax Description

show

Displays configurations.

network

Network configuration.

summary

Summary of network configuration.


Defaults

None.

Examples

> show network summary
 
   
RF-Network Name............................. mrf
Web Mode.................................... Enable
Secure Web Mode............................. Enable
Secure Web Mode Cipher-Option High.......... Disable
Secure Shell (ssh).......................... Enable
Telnet...................................... Enable
Ethernet Multicast Mode..................... Disable
Ethernet Broadcast Mode..................... Disable
IGMP snooping............................... Disabled
IGMP timeout................................ 60 seconds
User Idle Timeout........................... 300 seconds
ARP Idle Timeout............................ 300 seconds
Cisco AP Default Master..................... Disable
AP Join Priority............................ Enabled
Mgmt Via Wireless Interface................. Disable
Mgmt Via Dynamic Interface.................. Disable
Bridge MAC filter Config.................... Enable
Bridge Security Mode........................ EAP
Over The Air Provisioning of AP's........... Disable
Apple Talk ................................. Disable
AP Fallback ................................ Enable
Web Auth Redirect Ports .................... 80
Fast SSID Change ........................... Disabled
802.3 Bridging ............................. Disable

Related Commands

config ap priority

config network ap-priority

config network arptimeout

config network bcast-ssid

config network broadcast

config network dsport

config network master-base

config network mgmt-via-wireless

config network multicast global

config network params

config network rf-mobility-domain

config network secureweb

config network secweb-passwd

config network ssh

config network telnet

config network usertimeout

config network vlan

config network webmode

show network multicast mgid detail

To display all the clients joined to the multicast group in a specific MGID, use the show network multicast mgid detail command.

show network multicast mgid detail mgid_value

Syntax Description

show

Displays configurations.

network

Network configuration.

mgid_value

Number between 550 and 4095.


Defaults

None.

Examples

> show network multicast mgid detail
 
   
Mgid ............................... 550
Multicast Group Address ............ 239.255.255.250
Vlan ............................... 0
Rx Packet Count .................... 807399588
No of clients ...................... 1
Client List ........................ 
		Client MAC 	 				Expire TIme (mm:ss)
	 	00:13:02:23:82:ad 	 0:20

Related Commands

show network multicast mgid summary

show network multicast mgid summary

To display all the multicast groups and their corresponding MGIDs, use the show network multicast mgid summary command.

show network multicast mgid summary

Syntax Description

show

Displays configurations.

network

Network configuration.


Defaults

None.

Examples

> show network multicast mgid summary
 
   
Layer2 MGID Mapping:
-------------------
InterfaceName 		 		 		 	 vlanId 		 	MGID
----------------------------- ------ 	-----
management 	 	 	 	 			 0 	 	 	0
test 	 	 			 		 0 			9
wired 	 						 20 	 		8
 
   
Layer3 MGID Mapping:
-------------------
Number of Layer3 MGIDs ................ 1
 
   
	Group address 	 	 	 	 	Vlan 	 	MGID
	------------------ 	----- 	 ------
	239.255.255.250 		 	 	 0 	 	 	550
 
   

Related Commands

show network multicast mgid detail

show nmsp notify-interval summary

To display the NMSP configuration settings, use the show nmsp notify-interval summary command.

Syntax Description

This command has no arguments or keywords.

Defaults

None

Examples

>show nmsp notify-interval summary
 
   
NMSP Notification Interval Summary
 
   
 Client
        Measurement interval:    2 sec
 RFID
        Measurement interval:    8 sec
 Rogue AP
        Measurement interval:    2 sec
 Rogue Client
        Measurement interval:    2 sec
 
   

Related Commands

config nmsp notify-interval measurement

show nmsp statistics

To display NMSP coutners., use the show nmsp statistics command.

show nmsp statistics {summary | connection all}

Syntax Description

show

Displays configurations.

nmsp statistics

Displays NMSP coutners.

summary

Displays common NMSP counters.

connection all

Displays all connection-specific counters.


Defaults

This command has no defaults.

Examples

> show nmsp statistics summary

Related Commands

clear locp statistics

show nmsp status

To display the status of active NMSP connections, use the show nmsp status command.

show nmsp status

Syntax Description

This command has no arguments or keywords.

Defaults

This command has no defaults.

Examples

>show nmsp status
 
   
LocServer IP    TxEchoResp    RxEchoReq    TxData    RxData
--------------  -----------    ---------   --------   -------
10.19.35.51        34100       34100        6             6
 
   

Related Commands

clear locp statistics

show pmk-cache

To display information about the PMK cache, use the show port command.

show pmk-cache {all | MAC}

Syntax Description

show

Displays configurations.

pmk-cache

PMK cache.

all

Displays information about all entries in the PMK cache.

MAC

Displays information about a single entry in the PMK cache.


Defaults

None.

Examples

> show pmk-cache xx:xx:xx:xx:xx:xx
 
   
 
   
> show pmk-cache all
 
   
PMK Cache
                    Entry
Station             Lifetime   VLAN Override          IP Override
-----------------   --------   --------------------   ---------------

Related Commands

config pmk-cache delete

show port

To display the Cisco Wireless LAN controller port settings on an individual or global basis, use the show port command.

show port {port | summary}

Syntax Description

show

Displays configurations.

port

Cisco Wireless LAN controller port.

{port | summary}

Individual port or all ports.


Defaults

None.

Examples

> show port 1
 
   
           STP   Admin   Physical   Physical   Link   Link    Mcast
Pr  Type   Stat   Mode     Mode      Status   Status  Trap   Appliance   POE
-- ------- ---- ------- ---------- ---------- ------ ------- --------- -------
1  Normal  Disa Enable  Auto       1000 Full  Down   Enable  Enable     N/A

Note Some WLAN controllers may not have multicast or Power over Ethernet (PoE) listed because they do not support those features.


 
   
> show port summary
 
   
           STP   Admin   Physical   Physical   Link   Link    Mcast
Pr  Type   Stat   Mode     Mode      Status   Status  Trap   Appliance   POE
-- ------- ---- ------- ---------- ---------- ------ ------- --------- -------
1  Normal  Forw Enable  Auto       1000 Full  Up     Enable  Enable     N/A
2  Normal  Disa Enable  Auto       1000 Full  Down   Enable  Enable     N/A
3  Normal  Disa Enable  Auto       1000 Full  Down   Enable  Enable     N/A
4  Normal  Disa Enable  Auto       1000 Full  Down   Enable  Enable     N/A
 
   

Note Some WLAN controllers may have only one port listed because they have only one physical port.


Related Commands

config ap port

config network dsport

config mirror port

config port adminmode

config port linktrap

config port power

show qos queue_length all

To display quality of service (QoS) information (queue length), use the show qos command.

show qos queue_length all

Syntax Description

show

Displays configurations.

qos

Quality of Service information.

queue_length all

Displays queue lengths.


Defaults

None.

Examples

> show qos queue_length all
 
   
Platinum queue length.......................... 255
Gold queue length.............................. 255
Silver queue length............................ 150
Bronze queue length............................ 100

Related Commands

config qos

Show Radius Commands

Use the show radius commands to display RADIUS settings.

show radius acct statistics

To display the RADIUS accounting server statistics for the Cisco Wireless LAN controller, use the show radius acct statistics command.

show radius acct statistics

Syntax Description

show

Displays configurations.

radius acct

RADIUS accounting server.

statistics

Displays RADIUS accounting server statistics.


Defaults

None.

Examples

> show radius acct statistics
 
   
Accounting Servers:
Server Index..................................... 1
Server Address................................... 10.1.17.10
Msg Round Trip Time.............................. 0 (1/100 second)
First Requests................................... 0
Retry Requests................................... 0
Accounting Responses............................. 0
Malformed Msgs................................... 0
Bad Authenticator Msgs........................... 0
Pending Requests................................. 0
Timeout Requests................................. 0
Unknowntype Msgs................................. 0
Other Drops...................................... 0

Related Commands

show radius auth statistics

show radius summary

show radius auth statistics

To display the RADIUS authentication server statistics for the Cisco Wireless LAN controller, use the show radius auth statistics command.

show radius auth statistics

Syntax Description

show

Displays configurations.

radius auth

RADIUS authentication server.

statistics

Displays RADIUS authentication server statistics.


Defaults

None.

Examples

> show radius auth statistics
 
   
Authentication Servers:
  Server Index..................................... 1
  Server Address................................... 1.1.1.1
  Msg Round Trip Time.............................. 0 (1/100 second)
  First Requests................................... 0
  Retry Requests................................... 0
  Accept Responses................................. 0
  Reject Responses................................. 0
  Challenge Responses.............................. 0
  Malformed Msgs................................... 0
  Bad Authenticator Msgs........................... 0
  Pending Requests................................. 0
  Timeout Requests................................. 0
  Unknowntype Msgs................................. 0
  Other Drops...................................... 0

Related Commands

show radius acct statistics

show radius summary

show radius rfc3576 statistics

To display the RADIUS rfc3576 server statistics for the Cisco Wireless LAN controller, use the show radius rfc3576 statistics command.

RFC 3576, an extension to the RADIUS protocol, allows dynamic changes to a user session. This includes support for disconnecting users and changing authorizations applicable to a user session; that is, it provides support for Disconnect and Change-of-Authorization (CoA) messages. Disconnect messages cause a user session to be terminated immediately, whereas CoA messages modify session authorization attributes such as data filters.

show radius rfc3576 statistics

Syntax Description

show

Displays configurations.

radius rfc3576

RADIUS RFC3576 server.

statistics

Displays RADIUS RFC-3576 server statistics.


Defaults

None.

Examples

> show radius rfc3576 statistics
 
   
RFC-3576 Servers:
Server Index..................................... 1
Server Address................................... 10.1.17.10
Msg Round Trip Time.............................. 0 (1/100 second)
First Requests................................... 0
Retry Requests................................... 0
Accounting Responses............................. 0
Malformed Msgs................................... 0
Bad Authenticator Msgs........................... 0
Pending Requests................................. 0
Timeout Requests................................. 0
Unknown type Msgs................................. 0
Other Drops...................................... 0

Related Commands

show radius auth statistics

show radius summary

show radius rfc3576

show radius summary

To display the RADIUS authentication and accounting server summary, use the show radius summary command.

show radius summary

Syntax Description

show

Displays configurations.

radius

RADIUS authentication server.

summary

Server summary.


Defaults

None.

Examples

> show radius summary
 
   
Vendor Id Backward Compatibility................. Disabled
Credentials Caching.............................. Disabled
Call Station Id Type............................. IP Address
Administrative Authentication via RADIUS......... Enabled
 
   
Authentication Servers
 
   
Index  Type  Server Address    Port    State     Tout  RFC-3576  IPSec - AuthMod
e/Phase1/Group/Lifetime/Auth/Encr
-----  ----  ----------------  ------  --------  ----  --------  ---------------
---------------------------------
 
   
Accounting Servers
 
   
Index  Type  Server Address    Port    State     Tout  RFC-3576  IPSec - AuthMod
e/Phase1/Group/Lifetime/Auth/Encr
-----  ----  ----------------  ------  --------  ----  --------  ---------------
---------------------------------

Related Commands

show radius auth statistics

show radius acct statistics

Show RFID Commands

Use the show rfid commands to display rfid settings.

show rfid client

To list the RFID tags that are associated to the controller as clients, use the show rfid client command.

show rfid client

Syntax Description

This command has no arguments or keywords.

Command Default

This command has no defaults.

Command History

Release
Modification

4.2

This command was introduced.


Examples

When the RFID tag is in client mode, information similar to the following appears:

> show rfid client
 
   
------------------ 	-------- --------- ----------------- ------ ----------------
                         			 	 	 	 	 Heard                                             
   RFID Mac      	 			 	 VENDOR   Sec Ago    Associated AP    Chnl    Client State  
------------------ 	-------- --------- ----------------- ------ ----------------
 
   
00:14:7e:00:0b:b1 	 	 Pango 	 	 	 	 	 35  	 	 AP0019.e75c.fef4 	 	 1  	 	 	 	 Probing  


Note When the RFID tag is not in client mode, the above fields are blank.


Related Commands

config rfid

show rfid config

show rfid detail

show rfid summary

show rfid config

This command is used to display the current RFID configuration settings.

show rfid config

Syntax Description

This command has no arguments or keywords.

Defaults

This command has no defaults.

Command History

Release
Modification

4.1

This command was introduced.


Examples

> show rfid config
 
   
RFID Tag Data Collection ............................... Enabled
RFID Tag Auto-Timeout .................................. Enabled
RFID Client Data Collection ............................ Disabled
RFID Data Timeout ...................................... 200 seconds
 
   

Related Commands

config rfid

show rfid detail

show rfid summary

show rfid detail

This command is used to display detailed RFID information for a specified tag.

show rfid detail mac_address

Syntax Description

mac_address

Specifies the MAC address of an RFID tag.


Command Default

This command has no defaults.

Examples

> show rfid detail 32:21:3a:51:01:02
 
   
RFID address..................................... 00:12:b8:00:20:52
Vendor........................................... G2
Last Heard....................................... 51 seconds ago
Packets Received................................. 2
Bytes Received................................... 324
Cisco Type.......................................
 
   
Content Header
=================
Version.......................................... 0
Tx Power......................................... 12 dBm
Channel.......................................... 1
Reg Class........................................ 12
Burst Length..................................... 1
 
   
CCX Payload
===========
Last Sequence Control............................ 0
Payload length................................... 127
Payload Data Hex Dump
 
01 09 00 00 00 00 0b 85 52 52 52 02 07 4b ff ff
7f ff ff ff 03 14 00 12 7b 10 48 53 c1 f7 51 4b
50 ba 5b 97 27 80 00 67 00 01 03 05 01 42 34 00
00 03 05 02 42 5c 00 00 03 05 03 42 82 00 00 03
05 04 42 96 00 00 03 05 05 00 00 00 55 03 05 06
42 be 00 00 03 02 07 05 03 12 08 10 00 01 02 03
04 05 06 07 08 09 0a 0b 0c 0d 0e 0f 03 0d 09 03
08 05 07 a8 02 00 10 00 23 b2 4e 03 02 0a 03
 
Nearby AP Statistics:
	 lap1242-2(slot 0, chan 1) 50 seconds ag.... -76 dBm
     		 lap1242(slot 0, chan 1) 50 seconds ago..... -65 dBm

Related Commands

config rfid

show rfid config

show rfid summary

This command is used to display detailed RFID information for a specified tag.

show rfid summary

Syntax Description

This command has no arguments or keywords.

Command Default

This command has no defaults.

Command History

Release
Modification

4.1

This command was introduced.


Examples

> show rfid summary
 
   
Total Number of RFID   : 5
----------------- -------- ------------------ ------ ---------------------
     RFID ID      VENDOR       Closest AP      RSSI  Time Since Last Heard
----------------- -------- ------------------ ------ ---------------------
 
   
00:04:f1:00:00:04 Wherenet ap:1120             -51      858 seconds ago
00:0c:cc:5c:06:d3 Aerosct  ap:1120             -51       68 seconds ago
00:0c:cc:5c:08:45 Aerosct  AP_1130             -54      477 seconds ago
00:0c:cc:5c:08:4b Aerosct  wolverine           -54      332 seconds ago
00:0c:cc:5c:08:52 Aerosct  ap:1120             -51      699 seconds ago
 
   

Related Commands

config rfid

show rfid config

show rfid detail

Show Rogue Adhoc Commands

Use the rogue adhoc commands rogue adhoc settings.

show rogue adhoc detailed

To show details of an ad-hoc rogue access point detected by the Cisco Wireless LAN controller, use the show rogue adhoc client detailed command.

show rogue adhoc detailed MAC

Syntax Description

show

Displays configurations.

rogue adhoc

Ad-hoc rogue.

detailed

Displays detailed information.

MAC

Ad-hoc rogue MAC address.


Defaults

None.

Examples

> show rogue adhoc detailed 02:61:ce:8e:a8:8c
 
   
Adhoc Rogue MAC address.......................... 02:61:ce:8e:a8:8c
Adhoc Rogue BSSID................................ 02:61:ce:8e:a8:8c
State............................................ Alert
First Time Adhoc Rogue was Reported.............. Tue Dec 11 20:45:45 2007
Last Time Adhoc Rogue was Reported............... Tue Dec 11 20:45:45 2007
Reported By
AP 1
MAC Address.............................. 00:14:1b:58:4a:e0
Name..................................... AP0014.1ced.2a60
Radio Type............................... 802.11b
SSID..................................... rf4k3ap
Channel.................................. 3
RSSI..................................... -56 dBm
SNR...................................... 15 dB
Encryption............................... Disabled
ShortPreamble............................ Disabled
WPA Support.............................. Disabled
Last reported by this AP............... Tue Dec 11 20:45:45 2007
 
   

Related Commands

show rogue adhoc summary

show rogue adhoc summary

To display a summary of the ad-hoc rogue access points detected by the Cisco Wireless LAN controller, use the show rogue adhoc summary command.

show rogue adhoc summary

Syntax Description

show

Displays configurations.

rogue adhoc

Ad-hoc rogue access point.

summary

Displays a list of all Adhoc Rogues.


Defaults

None.

Examples

> show rogue adhoc summary
Detect and report Ad-Hoc Networks................ Enabled
 
   
Client MAC Address   Adhoc BSSID    State  # APs       Last Heard
------------------   -----------    -----    ---       -------
xx:xx:xx:xx:xx:xx    super          Alert    1         Sat Aug  9 21:12:50 2004
xx:xx:xx:xx:xx:xx                   Alert    1         Aug  9 21:12:50 2003
xx:xx:xx:xx:xx:xx                   Alert    1         Sat Aug  9 21:10:50 2003 

Related Commands

show rogue adhoc detailed

Show Rogue AP Commands

Use the rogue ap commands to display rogue access point settings.

show rogue ap clients

To show details of a rogue access point clients detected by the Cisco Wireless LAN controller, use the show rogue ap clients command.

show rogue ap clients ap_mac_address

Syntax Description

show

Displays configurations.

rogue ap

Rogue access point.

clients

Summary information.

ap_mac_address

Rogue access point MAC address.


Defaults

None.

Examples

> show rogue ap clients xx:xx:xx:xx:xx:xx
MAC Address State # APs Last Heard
----------------- ------------------ ----- -------------------------
00:bb:cd:12:ab:ff Alert 1 Fri Nov 30 11:26:23 2007
 
   

Related Commands

show rogue ap summary

show rogue ap detailed

To show details of a rogue access point detected by the Cisco Wireless LAN controller, use the show rogue-ap detailed command.

show rogue ap detailed ap_mac_address

Syntax Description

show

Displays configurations.

rogue ap

Rogue access point.

detailed

Displays detailed information.

ap_mac_address

Rogue access point MAC address.


Defaults

None.

Examples

> show rogue ap detailed xx:xx:xx:xx:xx:xx
 
   
Rogue BSSID...................................... 00:0b:85:63:d1:94
Is Rogue on Wired Network........................ No
Classification................................... Unclassified
State............................................ Alert
First Time Rogue was Reported.................... Fri Nov 30 11:24:56 2007
Last Time Rogue was Reported..................... Fri Nov 30 11:24:56 2007
Reported By
AP 1
MAC Address.............................. 00:12:44:bb:25:d0
Name..................................... HReap
Radio Type............................... 802.11g
SSID..................................... edu-eap
Channel.................................. 6
RSSI..................................... -61 dBm
SNR...................................... -1 dB
Encryption............................... Enabled
ShortPreamble............................ Enabled
WPA Support.............................. Disabled
Last reported by this AP.............. Fri Nov 30 11:24:56 2007
 
   

Related Commands

show rogue ap summary

show rogue ap clients

show rogue ap summary

To display a summary of the rogue access points detected by the Cisco Wireless LAN controller, use the show rogue-ap summary command.

show rogue ap summary

Syntax Description

show

Displays configurations.

rogue ap

Rogue access point.

summary

Displays a list of all rogue access points.


Defaults

None.

Examples

> show rogue ap summary
 
   
Rogue Location Discovery Protocol................  Disabled
Rogue ap timeout.................................  1200
 
   
MAC Address        Classification     # APs # Clients Last Heard
-----------------  ------------------ ----- --------- -----------------------
xx:xx:xx:xx:xx:xx  friendly           1     0         Thu Aug  4 18:57:11 2005
xx:xx:xx:xx:xx:xx  malicious          1     0         Thu Aug  4 19:00:11 2005
xx:xx:xx:xx:xx:xx  malicious          1     0         Thu Aug  4 18:57:11 2005
xx:xx:xx:xx:xx:xx  malicious          1     0         Thu Aug  4 18:57:11 2005

Related Commands

show rogue ap detailed

show rogue ap clients

show rogue ap friendly summary

show rogue ap malicious summary

show rogue ap unclassified summary

show rogue ap friendly summary

To view a list of the friendly rogue access points detected by the controller, use the show rogue-ap friendly summary command.

show rogue ap friendly summary

Syntax Description

show

Displays configurations.

rogue ap

Rogue access point.

friendly

Friendly rogue access points

summary

Displays a list of all rogue access points.


Defaults

None.

Examples

> show rogue ap friendly summary
 
   
Number of APs.................................... 1
MAC Address 					State 				# APs	 # Clients Last Heard
----------------- ------------------ ----- --------- ---------------------------
00:0a:b8:7f:08:c0 Internal 										1		 0 	Tue Nov 27 13:52:04 2007
 
   

Related Commands

show rogue ap detailed

show rogue ap clients

show rogue ap malicious summary

show rogue ap summary

show rogue ap unclassified summary

show rogue ap malicious summary

To view a list of the malicious rogue access points detected by the controller, use the show rogue-ap malicious summary command.

show rogue ap malicious summary

Syntax Description

show

Displays configurations.

rogue ap

Rogue access point.

malicious

Malicious rogue access points

summary

Displays a list of all rogue access points.


Defaults

None.

Examples

> show rogue ap malicious summary
 
   
Number of APs.................................... 2
MAC Address 					State 				# APs	 # Clients Last Heard
----------------- ------------------ ----- --------- ---------------------------
XX:XX:XX:XX:XX:XX Alert 										1		 0 	Tue Nov 27 13:52:04 2007
XX:XX:XX:XX:XX:XX Alert 										1		 0 	Tue Nov 27 13:52:04 2007
 
   

Related Commands

show rogue ap detailed

show rogue ap clients

show rogue ap friendly summary

show rogue ap summary

show rogue ap unclassified summary

show rogue ap unclassified summary

To view a list of the unclassified rogue access points detected by the controller, use the show rogue-ap unclassified summary command.

show rogue ap unclassified summary

Syntax Description

show

Displays configurations.

rogue ap

Rogue access point.

unclassified

Unclassified rogue access points

summary

Displays a list of all rogue access points.


Defaults

None.

Examples

> show rogue ap unclassified summary
 
   
Number of APs.................................... 164
MAC Address 				State 					# APs # Clients Last Heard
----------------- ------------------ ----- --------- -----------------------
00:0b:85:63:cd:bd Alert 									1 		0 		Fri Nov 30 11:12:52 2007
00:0b:85:63:cd:e7 Alert 									1 		0 		Fri Nov 30 11:29:01 2007
00:0b:85:63:ce:05 Alert 									1 		0 		Fri Nov 30 11:26:23 2007
00:0b:85:63:ce:07 Alert 									1 		0 		Fri Nov 30 11:26:23 2007
 
   
 
   

Related Commands

show rogue ap detailed

show rogue ap clients

show rogue ap friendly summary

show rogue ap malicious summary

show rogue ap summary

show rogue ap unclassified summary

Show Rogue Client Commands

Use the following rogue client commands to display the rogue client settings.

show rogue client detailed

To show details of a rogue client detected by a Cisco Wireless LAN controller, use the show rogue client detailed command.

show rogue client detailed MAC

Syntax Description

show

Displays configurations.

rogue client

Rogue client.

detailed

Provide detailed information for a rogue client.

MAC

Rogue client MAC address.


Defaults

None.

Examples

> show rogue client detailed xx:xx:xx:xx:xx:xx
 
   
Rogue BSSID...................................... 00:0b:85:23:ea:d1
State............................................ Alert
First Time Rogue was Reported.................... Mon Dec 3 21:50:36 2007
Last Time Rogue was Reported..................... Mon Dec 3 21:50:36 2007
Rogue Client IP address.......................... Not known
Reported By
AP 1
MAC Address.............................. 00:15:c7:82:b6:b0
Name..................................... AP0016.47b2.31ea
Radio Type............................... 802.11a
RSSI..................................... -71 dBm
SNR...................................... 23 dB
Channel.................................. 149
Last reported by this AP.............. Mon Dec 3 21:50:36 2007
 
   

Related Commands

show rogue client summary

show rogue client summary

To display a summary of the rogue clients detected by the Cisco Wireless LAN controller, use the show rogue client summary command.

show rogue client summary

Syntax Description

show

Displays configurations.

rogue client

Rogue client.

summary

Displays a list of all rogue clients.


Defaults

None.

Examples

> show rogue client summary
 
   
MAC Address        State              # APs Last Heard
-----------------  ------------------ ----- -----------------------
xx:xx:xx:xx:xx:xx  Alert              1     Thu Aug  4 19:00:08 2005
xx:xx:xx:xx:xx:xx  Alert              1     Thu Aug  4 19:00:08 2005
xx:xx:xx:xx:xx:xx  Alert              1     Thu Aug  4 19:00:08 2005
xx:xx:xx:xx:xx:xx  Alert              1     Thu Aug  4 19:00:08 2005
xx:xx:xx:xx:xx:xx  Alert              1     Thu Aug  4 19:00:08 2005
xx:xx:xx:xx:xx:xx  Alert              1     Thu Aug  4 19:00:08 2005
xx:xx:xx:xx:xx:xx  Alert              1     Thu Aug  4 19:09:11 2005
xx:xx:xx:xx:xx:xx  Alert              1     Thu Aug  4 19:03:11 2005
xx:xx:xx:xx:xx:xx  Alert              1     Thu Aug  4 19:03:11 2005
xx:xx:xx:xx:xx:xx  Alert              1     Thu Aug  4 19:09:11 2005
xx:xx:xx:xx:xx:xx  Alert              1     Thu Aug  4 18:57:08 2005
xx:xx:xx:xx:xx:xx  Alert              1     Thu Aug  4 19:12:08 2005

Related Commands

show rogue client detailed

show rogue ignore-list

To view a list of rogue access points that are configured to be ignored, use the show rogue ignore-list command.

show rogue ignore-list

Syntax Description

show

Displays configurations.

rogue ignore-list

Rogue access points that are configured to be ignored.

summary

Displays a list of all rogue clients.


Defaults

None.

Examples

> show rogue client summary
 
   
MAC Address       
-----------------  
xx:xx:xx:xx:xx:xx

Related Commands

show rogue client detailed

Show Rogue Rule Commands

Use the following rogue rule commands to display the rogue rule settings.

show rogue rule detailed

To view detailed information for a specific rogue classification rule, use the show rogue rule detailed command.

show rogue rule detailed rule_name

Syntax Description

show

Displays configurations.

rogue rule

Rogue rules.

detailed

Shows detailed information on a specific rogue classification rule.

rule_name

Rogue rule name.


Defaults

None.

Examples

> show rogue rule detailed Rule2
 
   
Priority......................................... 2
Rule Name........................................ Rule2
State............................................ Enabled
Type............................................. Malicious
Match Operation.................................. Any
Hit Count........................................ 352
Total Conditions................................. 2
Condition 1
type......................................... Client-count
value........................................ 10
Condition 2
type......................................... Duration
value (seconds).............................. 2000

Related Commands

show rogue rule detailed

show rogue rule summary

To view the rogue classification rules that are configured on the controller, use the show rogue rule summary command.

show rogue rule summary

Syntax Description

show

Displays configurations.

rogue rule

Rogue rules.

summary

Displays a list of all rogue rules that are configured on the controller


Defaults

None.

Examples

> show rogue rule summary
 
   
Priority Rule Name               State    Type          Match Hit Count
-------- ----------------------- -------- ------------- ----- ---------
1        mtest                   Enabled  Malicious     All   0
2        asdfasdf                Enabled  Malicious     All   0

Related Commands

show rogue rule detailed

show route summary

To show the routes assigned to the Cisco Wireless LAN controller service port, use the show route summary command.

show route summary

Syntax Description

show route

Command action.

summary

Displays all the configured routes.


Defaults

None.

Examples

> show route summary
 
   
Number of Routes............................... 1
 
   
Destination Network          Genmask               Gateway
-------------------    -------------------   -------------------
xxx.xxx.xxx.xxx        255.255.255.0         xxx.xxx.xxx.xxx

Related Commands

config route

show rules

To show the active internal firewall rules, use the show rules command.

show rules

Syntax Description

show rules

Displays active internal firewall rules.


Defaults

None.

Examples

> show rules
 
   
--------------------------------------------------------
Rule ID.............: 3
Ref count...........: 0
Precedence..........: 99999999
Flags...............: 00000001 ( PASS )
Source IP range:
        (Local stack)
Destination IP range:
        (Local stack)
--------------------------------------------------------
Rule ID.............: 25
Ref count...........: 0
Precedence..........: 99999999
Flags...............: 00000001 ( PASS )
Service Info
        Service name........: GDB
        Protocol............: 6
        Source port low.....: 0
        Source port high....: 0
        Dest port low.......: 1000
        Dest port high......: 1000
Source IP range:
IP High............: 0.0.0.0
        Interface..........: ANY
Destination IP range:
        (Local stack)
--------------------------------------------------------
...

Related Commands

None.

show run-config

To show a comprehensive view of the current Cisco Wireless LAN controller configuration, use the show run-config command.

show run-config

Syntax Description

show run-config

Command action.


Defaults

None.

Examples

> show run-config
 
   
Press Enter to continue...
 
   
System Inventory
Switch Description............................... Cisco Controller
Machine Model.................................... 
Serial Number.................................... FLS0923003B
Burned-in MAC Address............................ xx:xx:xx:xx:xx:xx
Crypto Accelerator 1............................. Absent
Crypto Accelerator 2............................. Absent
Power Supply 1................................... Absent
Power Supply 2................................... Present, OK
 
   
Press Enter to continue Or <Ctl Z> to abort...

Note Some WLAN controllers may have no Crypto Accelerator (VPN Termination Module) or Power Supplies listed because they have no provisions for VPN Termination Modules or Power Supplies.


Related Commands

config route

show serial

To show the serial (console) port configuration, use the show serial command.

show serial

Syntax Description

show

Displays configurations.

serial

Displays EIA-232 parameters and serial port inactivity timeout.


Defaults

9600, 8, off, 1, none.

Examples

> show serial
 
   
Serial Port Login Timeout (minutes)......... 45
Baud Rate................................... 9600
Character Size.............................. 8
Flow Control:............................... Disable
Stop Bits................................... 1
Parity Type:................................ none

Related Commands

config serial baudrate

config serial timeout

show sessions

To show the console port login timeout and maximum number of simultaneous Command Line Interface (CLI) sessions, use the show sessions command.

show sessions

Syntax Description

show

Displays configurations.

sessions

Displays CLI session configuration information.


Defaults

5 minutes, 5 sessions.

Examples

> show sessions
 
   
CLI Login Timeout (minutes)............ 0
Maximum Number of CLI Sessions......... 5
 
   

The response indicates that the CLI sessions never time out and that the Cisco Wireless LAN controller can host up to five simultaneous CLI sessions.

Related Commands

config sessions maxsessions

config sessions timeout

show services mobility

To view all mobility services active on the controller, use the show services mobility command.

show services mobility {summary | detail {all | ipaddr}}

Syntax Description

show

Displays configurations.

services mobility

Displays mobilty services.

summary

Displays summary of mobility services.

detail

Displays mobility services in detail.

all

Displays details for all connections.

ipaddr

Displays details for the specified IP connection.


Defaults

None.

Examples

show services mobility summary
Mobility Services Subscribed:
 
   
Server           IP Services
10.19.35.218     Client Tracking, Tag Tracking

show snmpcommunity

To display SNMP community entries, use the show snmpcommunity command.

show snmpcommunity

Syntax Description

show

Displays configurations.

snmpcommunity

Displays SNMP community entries.


Defaults

None.

Examples

> show snmpcommunity
 
   
SNMP Community Name Client IP Address Client IP Mask    Access Mode Status
------------------- ----------------- ----------------- ----------- --------
public              0.0.0.0           0.0.0.0           Read Only   Enable
**********          0.0.0.0           0.0.0.0           Read/Write  Enable

Related Commands

config snmp version

config snmp community mode

config snmp community accessmode

config snmp community create

config snmp community delete

config snmp community ipaddr

show snmptrap

To show the Cisco Wireless LAN controller SNMP trap receivers and their status, use the show snmptrap command.

show snmptrap

Syntax Description

show

Displays configurations.

snmptrap

SNMP trap receivers.


Defaults

None.

Examples

> show snmptrap
 
   
SNMP Trap Receiver Name    IP Address        Status
------------------------   ----------------- --------
xxx.xxx.xxx.xxx            xxx.xxx.xxx.xxx   Enable

Related Commands

config snmp version

config snmp trapreceiver

show snmpv3user

To show the SNMP version 3 configuration, use the show snmpv3user command.

show snmpv3user

Syntax Description

show

Displays configurations.

snmpv3user

SNMP version 3 configuration information.


Defaults

None.

Examples

> show snmpv3user
 
   
SNMP v3 User Name    AccessMode  Authentication Encryption
-------------------- ----------- -------------- ----------
default              Read/Write  HMAC-SHA       CFB-AES

Related Commands

config snmp version

config snmp v3user

show snmpversion

To display which versions of Simple Network Management Protocol (SNMP) are enabled or disabled on your controller, use the show snmpversion command.

show snmpversion

Syntax Description

show

Display settings.

snmpversion

Displays SNMP v1/v2/v3c status (enabled or disabled).


Defaults

Enable.

Examples

> show snmpversion
 
   
SNMP v1  Mode.................................. Disable
SNMP v2c Mode.................................. Enable
SNMP v3  Mode.................................. Enable

Related Commands

config snmp version

show spanningtree port

To show the Cisco Wireless LAN controller spanning tree port configuration, use the show spanningtree port command.

When the a Cisco 4400 Series wireless LAN controller is configured for port redundancy, spanning tree protocol must be disabled for all ports on the Cisco 4400 series wireless LAN controller. Spanning tree protocol can remain enabled on the switch connected to the Cisco 4400 series wireless LAN controller.

show spanningtree port port

Syntax Description

show

Displays configurations.

spanningtree

Spanning tree.

port

Displays spanning tree values on a per port basis.

port

Physical port number:

1 through 4 on Cisco 2100 series wireless LAN controller.

1 or 2 on Cisco 4402 series wireless LAN controller.

1 through 4 on Cisco 4404 series wireless LAN controller.



Note Some WLAN controllers do not support the spanning tree function.


Defaults

800C, Disabled, 802.1D, 128, 100, Auto.

Examples

> show spanningtree port 3
 
   
STP Port ID................................. 800C
STP Port State.............................. Disabled
STP Port Administrative Mode................ 802.1D
STP Port Priority........................... 128
STP Port Path Cost.......................... 100
STP Port Path Cost Mode..................... Auto

Related Commands

config spanningtree port

show spanningtree switch

To show the Cisco Wireless LAN controller network (DS port) spanning tree configuration, use the show spanningtree switch command.

show spanningtree switch

Syntax Description

show

Displays configurations.

spanningtree

Spanning tree.

switch

Displays spanning tree values on a per switch basis.



Note Some WLAN controllers do not support the spanning tree function.


Defaults

None.

Examples

> show spanningtree switch
 
   
STP Specification...................... IEEE 802.1D
STP Base MAC Address................... 00:0B:85:02:0D:20
Spanning Tree Algorithm................ Disable
STP Bridge Priority.................... 32768
STP Bridge Max. Age (seconds).......... 20
STP Bridge Hello Time (seconds)........ 2
STP Bridge Forward Delay (seconds)..... 15

Related Commands

config spanningtree switch bridgepriority

config spanningtree switch forwarddelay

config spanningtree switch hellotime

config spanningtree switch maxage

config spanningtree switch mode

Show Statistics Commands

Use the show stats commands to display controller statistics.

show stats port

To show physical port receive and transmit statistics, use the show stats port command.

show stats port {detailed port | summary port}

Syntax Description

show

Displays configurations.

stats

Statistics.

port

Port.

detailed

Displays detailed port statistics.

summary

Displays port summary statistics.

port

Physical port number:

1 through 4 on Cisco 2100 Series wireless LAN controllers.

1 or 2 on Cisco 4402 Series wireless LAN controllers.

1 through 4 on Cisco 4404 Series wireless LAN controllers.

1 on Cisco WLCM Series wireless LAN controllers.


Defaults

None.

Examples

> show stats port summary 1
 
   
Packets Received Without Error................. 399958
Packets Received With Error.................... 0
Broadcast Packets Received..................... 8350
Packets Transmitted Without Error.............. 106060
Transmit Packets Errors........................ 0
Collisions Frames.............................. 0
Time Since Counters Last Cleared............... 2 day 11 hr 16 min 23 sec
 
   
> show stats port detailed 1
 
   
PACKETS RECEIVED (OCTETS)
Total Bytes...................................... 267799881
64 byte pkts        :918281
65-127 byte pkts    :354016         128-255 byte pkts   :1283092
256-511 byte pkts   :8406           512-1023 byte pkts  :3006
1024-1518 byte pkts :1184           1519-1530 byte pkts :0
> 1530 byte pkts    :2
 
   
PACKETS RECEIVED SUCCESSFULLY
Total............................................ 2567987
Unicast Pkts  :2547844       Multicast Pkts:0          Broadcast Pkts:20143
 
   
PACKETS RECEIVED WITH MAC ERRORS
Total............................................ 0
Jabbers   :0               Undersize :0               Alignment :0
FCS Errors:0               Overruns  :0
 
   
RECEIVED PACKETS NOT FORWARDED
Total............................................ 0
Local Traffic Frames:0              RX Pause Frames     :0
Unacceptable Frames :0              VLAN Membership     :0
VLAN Viable Discards:0              MulticastTree Viable:0
ReserveAddr Discards:0
CFI Discards        :0              Upstream Threshold  :0
 
   
PACKETS TRANSMITTED (OCTETS)
Total Bytes...................................... 353831
64 byte pkts        :0              65-127 byte pkts    :0
128-255 byte pkts   :0              256-511 byte pkts   :0
512-1023 byte pkts  :0              1024-1518 byte pkts :2
1519-1530 byte pkts :0              Max Info            :1522
 
   
PACKETS TRANSMITTED SUCCESSFULLY
Total............................................ 5875
Unicast Pkts  :5868           Multicast Pkts:0           Broadcast Pkts:7
 
   
 
   
TRANSMIT ERRORS
Total Errors..................................... 0
FCS Error     :0           TX Oversized  :0           Underrun Error:0
 
   
TRANSMIT DISCARDS
Total Discards................................... 0
Single Coll Frames  :0              Multiple Coll Frames:0
Excessive Coll Frame:0              Port Membership     :0
VLAN Viable Discards:0
 
   
PROTOCOL STATISTICS
BPDUs Received      :6              BPDUs Transmitted   :0
802.3x RX PauseFrame:0
 
   
Time Since Counters Last Cleared............... 2 day 0 hr 39 min 59 sec

Related Commands

config port adminmode

show stats switch

To show the network (DS port) receive and transmit statistics, use the show stats switch command.

show stats switch {detailed | summary}

Syntax Description

show

Displays configurations.

stats

Statistics.

switch

Cisco Wireless LAN controller.

detailed

Displays detailed switch statistics.

summary

Displays switch summary statistics.


Defaults

None.

Examples

> show stats switch summary
 
   
Packets Received Without Error................. 136410
Broadcast Packets Received..................... 18805
Packets Received With Error.................... 0
Packets Transmitted Without Error.............. 78002
Broadcast Packets Transmitted.................. 3340
Transmit Packet Errors......................... 2
Address Entries Currently In Use............... 26
VLAN Entries Currently In Use.................. 1
Time Since Counters Last Cleared............... 2 day 11 hr 22 min 17 sec
 
   
> show stats switch detailed
 
   
RECEIVE
Octets........................................... 19351718
Total Pkts....................................... 183468
Unicast Pkts..................................... 180230
Multicast Pkts................................... 3219
Broadcast Pkts................................... 19
Pkts Discarded................................... 0
 
   
TRANSMIT
Octets........................................... 354251
Total Pkts....................................... 5882
Unicast Pkts..................................... 5875
Multicast Pkts................................... 0
Broadcast Pkts................................... 7
Pkts Discarded................................... 0
 
   
ADDRESS ENTRIES
Most Ever Used................................... 1
Currently In Use................................. 1
 
   
VLAN ENTRIES
Maximum.......................................... 128
Most Ever Used................................... 1
Static In Use.................................... 1
Dynamic In Use................................... 0
VLANs Deleted.................................... 0
Time Since Ctrs Last Cleared..................... 2 day 0 hr 43 min 22 sec

Related Commands

config network dsport

show switchconfig

To display parameters that apply to the Cisco Wireless LAN controller, use the show switchconfig command.

show switchconfig

Syntax Description

show

Displays configurations.

switchconfig

Displays parameters that apply to the Cisco Wireless LAN controller.


Defaults

None.

Examples

> show switchconfig
 
   
802.3x Flow Control Mode......................... Disable
Current LWAPP Transport Mode..................... Layer 3
LWAPP Transport Mode after next switch reboot.... Layer 3

Related Commands

config switchconfig flowcontrol

config switchconfig mode

show sysinfo

To show high-level Cisco Wireless LAN controller information, use the show sysinfo command.

show sysinfo

Syntax Description

show

Displays configurations.

sysinfo

Cisco Wireless LAN controller information.


Defaults

None.

Examples

> show sysinfo
 
   
Manufacturer's Name.......................... <company name>
Product Name................................. 
Product Version.............................. 1.2.48.0
RTOS Version................................. 1.2.48.0
Bootloader Version........................... 1.1.11.0
 
   
System Name.................................. IT2003
System Location.............................. Andrew 1
System Contact............................... Wireless_administrator
System ObjectID.............................. 1.3.6.1.4.1.14179
IP Address................................... 172.168.2.36
System Up Time............................... 2 days 11 hrs 30 mins 1 secs
 
   
Configured Country........................... United States
Operating Environment........................ Commercial (0 to 40 C)
Internal Temp Alarm Limits................... 0 to 65 C
Internal Temperature......................... +38 C
 
   
State of 802.11b Network..................... Enabled
State of 802.11a Network..................... Enabled
Number of WLANs.............................. 2
3rd Party Access Point Support............... Disabled
Number of Active Clients..................... 1
xxxxxxxxxxxxxxxxx

Related Commands

config ap, config country

config sysname

config wlan

show tacacs acct statistics

This command is used to display detailed RFID information for a specified tag.

show tacacs acct statistics

Syntax Description

This command has no arguments or keywords.

Command Default

This command has no defaults.

Command History

Release
Modification

4.1

This command was introduced.


Examples

> show tacacs acct statistics
 
   
Accounting Servers:
 
   
Server Index..................................... 1
Server Address................................... 10.0.0.0
Msg Round Trip Time.............................. 0 (1/100 second)
First Requests................................... 1
Retry Requests................................... 0
Accounting Response.............................. 0
Accounting Request Success....................... 0
Accounting Request Failure....................... 0
Malformed Msgs................................... 0
Bad Authenticator Msgs........................... 0
Pending Requests................................. -1
Timeout Requests................................. 1
Unknowntype Msgs................................. 0
Other Drops...................................... 0

Related Commands

config tacacs

show tacacs summary

show tacacs athr statistics

This command is used to display TACACS+ server authorization statistics.

show tacacs athr statistics

Syntax Description

This command has no arguments or keywords.

Command Default

This command has no defaults.

Command History

Release
Modification

4.1

This command was introduced.


Examples

> show tacacs athr statistics
 
   
Authorization Servers:
 
   
Server Index..................................... 3
Server Address................................... 10.0.0.3
Msg Round Trip Time.............................. 0 (1/100 second)
First Requests................................... 0
Retry Requests................................... 0
Received Responses............................... 0
Authorization Success............................ 0
Authorization Failure............................ 0
Challenge Responses.............................. 0
Malformed Msgs................................... 0
Bad Athrenticator Msgs........................... 0
Pending Requests................................. 0
Timeout Requests................................. 0
Unknowntype Msgs................................. 0
Other Drops...................................... 0

Related Commands

config tacacs

show tacacs summary

show tacacs auth statistics

This command is used to display TACACS+ server authentication statistics.

show tacacs auth statistics

Syntax Description

This command has no arguments or keywords.

Command Default

This command has no defaults.

Command History

Release
Modification

4.1

This command was introduced.


Examples

> show tacacs auth statistics
 
   
Authentication Servers:
 
   
Server Index..................................... 2
Server Address................................... 10.0.0.2
Msg Round Trip Time.............................. 0 (msec)
First Requests................................... 0
Retry Requests................................... 0
Accept Responses................................. 0
Reject Responses................................. 0
Error Responses.................................. 0
Restart Responses................................ 0
Follow Responses................................. 0
GetData Responses................................ 0
Encrypt no secret Responses...................... 0
Challenge Responses.............................. 0
Malformed Msgs................................... 0
Bad Authenticator Msgs........................... 0
Pending Requests................................. 0
Timeout Requests................................. 0
Unknowntype Msgs................................. 0
Other Drops...................................... 0

Related Commands

config tacacs

show tacacs summary

show tacacs summary

This command is used to display TACACS+ server summary information.

show tacacs summary

Syntax Description

This command has no arguments or keywords.

Command Default

This command has no defaults.

Command History

Release
Modification

4.1

This command was introduced.


Examples

> show tacacs summary
 
   
Authentication Servers
 
   
Idx  Server Address    Port    State     Tout
---  ----------------  ------  --------  ----
2    10.0.0.2          6       Enabled   30
 
   
Accounting Servers
 
   
Idx  Server Address    Port    State     Tout
---  ----------------  ------  --------  ----
1    10.0.0.0          10      Enabled   2
 
   
Authorization Servers
 
   
Idx  Server Address    Port    State     Tout
---  ----------------  ------  --------  ----
3    10.0.0.3          4       Enabled   2
... 

Related Commands

config tacacs

show tacacs summary

show tech-support

To show Cisco Wireless LAN controller variables frequently requested by Cisco Technical Assistance Center (TAC), use the show tech-support command.

show tech-support

Syntax Description

show

Displays configurations.

tech-support

Displays system resource information.


Defaults

None.

Examples

> show tech-support
 
   
Current CPU Load................................. 0%
 
   
System Buffers
   Max Free Buffers.............................. 4608
   Free Buffers.................................. 4604
   Buffers In Use................................ 4
 
   
Web Server Resources
   Descriptors Allocated......................... 152
   Descriptors Used.............................. 3
   Segments Allocated............................ 152
   Segments Used................................. 3
 
   
System Resources
   Uptime........................................ 747040 Secs
   Total Ram..................................... 127552 Kbytes
   Free Ram...................................... 19540 Kbytes
   Shared Ram.................................... 0 Kbytes
   Buffer Ram.................................... 460 Kbytes

Related Commands

None.

show time

To show the Cisco Wireless LAN controller time and date, use the show time command.

show time

Syntax Description

show

Displays configurations.

time

Cisco Wireless LAN controller time and date.


Defaults

None.

Examples

> show time
 
   
Time............................................. Thu Aug  4 19:51:49 2005
 
   
Timezone delta................................... 0:0
Daylight savings................................. disabled
 
   
NTP Servers
    NTP Polling Interval.........................     86400
 
   
     Index              NTP Server
    -------  --------------------------------

Related Commands

config time

show trapflags

To show the Cisco Wireless LAN controller SNMP trap flags, use the show trapflags command.

show trapflags

Syntax Description

show

Displays configurations.

trapflags

Displays the Cisco Wireless LAN controller SNMP trap flags.


Defaults

None.

Examples

> show trapflags
 
   
Authentication Flag............................ Enable
Link Up/Down Flag.............................. Enable
Multiple Users Flag............................ Enable
Spanning Tree Flag............................. Enable
 
   
Client Related Traps
        802.11 Disassociation......................... Disable
        802.11 Deauthenticate......................... Disable
        802.11 Authenticate Failure................... Disable
        802.11 Association Failure.................... Disable
        Excluded...................................... Disable
 
   
802.11 Security related traps
        WEP Decrypt Error............................. Enable
 
   
Cisco AP
        Register...................................... Enable
        InterfaceUp................................... Enable
 
   
Auto-RF Profiles
        Load.......................................... Enable
        Noise......................................... Enable
        Interference.................................. Enable
        Coverage...................................... Enable
 
   
Auto-RF Thresholds
        tx-power...................................... Enable
        channel....................................... Enable
        antenna....................................... Enable
 
   
AAA
        auth.......................................... Enable
        servers....................................... Enable
 
   
rogueap........................................ Enable
 
   
wps............................................ Enable
 
   
configsave..................................... Enable
 
   
IP Security
        esp-auth...................................... Enable
        esp-replay.................................... Enable
        invalidSPI.................................... Enable
        ike-neg....................................... Enable
        suite-neg..................................... Enable
        invalid-cookie................................ Enable

Related Commands

config trapflags authentication

config trapflags linkmode

config trapflags multiusers

config trapflags stpmode

config trapflags client

config trapflags ap

config trapflags rrm-profile

config trapflags rrm-params

config trapflags aaa

config trapflags rogueap

config trapflags configsave

config trapflags ipsec

show traplog

show traplog

To show the Cisco Wireless LAN controller SNMP trap log, use the show traplog command.

show traplog

Syntax Description

show

Displays configurations.

traplog

Cisco Wireless LAN controller SNMP trap log.


Defaults

None.

Examples

> show traplog
 
   
Number of Traps Since Last Reset........... 2447
Number of Traps Since Log Last Displayed... 2447
 
   
Log System Time              Trap
--- ------------------------ -------------------------------------------------
  0 Thu Aug  4 19:54:14 2005 Rogue AP : 00:0b:85:52:62:fe detected on Base Rad
                             io MAC : 00:0b:85:18:b6:50  Interface no:1(802.11
                             b/g) with RSSI: -78 and SNR: 10
  1 Thu Aug  4 19:54:14 2005 Rogue AP : 00:0b:85:52:19:d8 detected on Base Rad
                             io MAC : 00:0b:85:18:b6:50  Interface no:1(802.11
                             b/g) with RSSI: -72 and SNR: 16
  2 Thu Aug  4 19:54:14 2005 Rogue AP : 00:0b:85:26:a1:8d detected on Base Rad
                             io MAC : 00:0b:85:18:b6:50  Interface no:1(802.11
                             b/g) with RSSI: -82 and SNR: 6
  3 Thu Aug  4 19:54:14 2005 Rogue AP : 00:0b:85:14:b3:4f detected on Base Rad
                             io MAC : 00:0b:85:18:b6:50  Interface no:1(802.11
                             b/g) with RSSI: -56 and SNR: 30
 
   
Would you like to display more entries? (y/n)

Related Commands

show trapflags

show version

This command is used to display access point's software information .

show version

Syntax Description

This command has no arguments or keywords.

Defaults

This command has no defaults.

Command History

Release
Modification

4.1

This command was introduced.


Usage Guidelines

You can only use this command from the access point console port when not connected to a controller.

Examples

AP# show version
Cisco IOS Software, C1240 Software (C1240-K9W8-M), Experimental Version 
12.3(20060829:081904) [BLD-wnbu_a10_temp_060823.daily 163] 
Copyright (c) 1986-2006 by Cisco Systems, Inc. 
Compiled Wed 30-Aug-06 03:03 by 
ROM: Bootstrap program is C1240 boot loader 
BOOTLDR: C1240 Boot Loader (C1240-BOOT-M) Version 12.3(7)JA1, RELEASE SOFTWARE (fc1) 
Ap1242-2 uptime is 4 minutes 
System returned to ROM by power-on 
System image file is "flash:/c1240-k9w8-mx.wnbu_a10_temp_060823.20060830d/c1240-k9w8-" 
cisco AIR-LAP1242AG-A-K9 processor (revision B0) with 24566K/8192K bytes of memory. 
Processor board ID FTX0944B00B 
PowerPCElvis CPU at 266Mhz, revision number 0x0950 
Last reset from power-on 
LWAPP image version 4.1.69.0 
1 FastEthernet interface 
2 802.11 Radio(s) 
32K bytes of flash-simulated non-volatile configuration memory. 
Base ethernet MAC Address: 00:14:1C:ED:47:14 
Part Number : 73-9925-03 
PCA Assembly Number : 800-26579-03 
PCA Revision Number : A0 
PCB Serial Number : FOC09351E0U 
Top Assembly Part Number : 800-26804-01 
Top Assembly Serial Number : FTX0944B00B 
Top Revision Number : A0 
Product/Model Number : AIR-LAP1242AG-A-K9 
Configuration register is 0xF

Related Commands

None.

show watchlist

To display the client watchlist, use the show watchlist command.

show watchlist

Syntax Description

show

Command action.

watchlist

Displays client watchlist entry.


Defaults

None.

Examples

> show watchlist 
client watchlist state is disabled

Related Commands

config watchlist delete

config watchlist enable

config watchlist disable

config watchlist add

show wlan

To display configuration information for a specified wireless LAN or a foreign access point, or to display wireless LAN summary information, use the show wlan command.

show wlan [apgroups | summary | wlan_id | foreignAp]

Syntax Description

show

Displays configurations.

wlan

Wireless LAN.

apgroups

Displays access point group information.

summary

Displays a summary of all wireless LANs.

wlan_id

Wireless LAN identifier from 1 to 16.

foreignAp

Displays the configuration for support of foreign access points.


Defaults

None.

Examples

> show wlan 1
WLAN Identifier.................................. 1
Profile Name..................................... wlan
Network Name (SSID).............................. wlan
Status........................................... Enabled
MAC Filtering.................................... Disabled
Broadcast SSID................................... Enabled
AAA Policy Override.............................. Disabled
Network Admission Control
 
   
  NAC-State...................................... Enabled
  Quarantine VLAN................................ 110
Number of Active Clients......................... 0
Exclusionlist Timeout............................ 60 seconds
Session Timeout.................................. 1800 seconds
Webauth DHCP exclusion........................... Disabled
Interface........................................ management
WLAN ACL......................................... unconfigured
DHCP Server...................................... Default
DHCP Address Assignment Required................. Disabled
Quality of Service............................... Silver (best effort)
WMM.............................................. Allowed
CCX - AironetIe Support.......................... Enabled
CCX - Gratuitous ProbeResponse (GPR)............. Disabled
CCX - Diagnostics Channel Capability............. Disabled
Dot11-Phone Mode (7920).......................... Disabled
Wired Protocol................................... None
IPv6 Support..................................... Disabled
Peer-to-Peer Blocking Action..................... Disabled
Radio Policy..................................... All
DTIM period for 802.11a radio.................... 1
DTIM period for 802.11b radio.................... 1
Local EAP Authentication......................... Disabled
Security
 
   
   802.11 Authentication:........................ Open System
   Static WEP Keys............................... Disabled
   802.1X........................................ Disabled
   Wi-Fi Protected Access (WPA/WPA2)............. Enabled
      WPA (SSN IE)............................... Disabled
      WPA2 (RSN IE).............................. Enabled
         TKIP Cipher............................. Disabled
         AES Cipher.............................. Enabled
      Auth Key Managent
         802.1x.................................. Enabled
         PSK..................................... Disabled
         CCKM.................................... Disabled
         FT(802.11r)............................. Disabled
FT-PSK(802.11r)......................... Disabled
FT Reassociation Timeout......................... 20
FT Over-The-Air mode............................. Enabled
FT Over-The-Ds mode.............................. Enabled
   CKIP ......................................... Disabled
   IP Security................................... Disabled
   IP Security Passthru.......................... Disabled
   Web Based Authentication...................... Disabled
   Web-Passthrough............................... Disabled
   Conditional Web Redirect...................... Disabled
   Splash-Page Web Redirect...................... Disabled
   Auto Anchor................................... Disabled
   Cranite Passthru.............................. Disabled
   Fortress Passthru............................. Disabled
   H-REAP Local Switching........................ Disabled
   Infrastructure MFP protection................. Enabled (Global Infrastructu
 MFP Disabled)
   Client MFP.................................... Optional
   Tkip MIC Countermeasure Hold-down Timer....... 60
 
   
 Mobility Anchor List
 WLAN ID     IP Address            Status
 -------     ---------------       ------
> show wlan summary
 
   
Number of WLANs.................................. 2
 
   
WLAN ID  WLAN Profile Name / SSID               Status    Interface Name
-------  -------------------------------------  --------  --------------------
1 			test / test 									Disabled  management
 
   
> show wlan foreignap
 
   
Foreign AP support is not enabled.
 
   

Related Commands

config wlan create

Show WPS Commands

Use the show wps commands to display Wireless Protection System (WPS) settings.

show wps

To display the Wireless Protection System configuration on the controller, use the show wps command.

show wps {ap-authentication summary | signature summary | summary}

Syntax Description

show

Command action.

wps

Display WPS configuration.

ap-authentication summary

Display AP neighbor WPS authentication.

signature summary

Display the WPS signature summary.

summary

Display the WPS summary.


Defaults

None.

Examples

> show wps ap-authentication summary
 
   
AP neighbor authentication is <disabled>.
 
   
Authentication alarm threshold is 1.
RF-Network Name: <B1>
 
   
 
   
> show wps signature summary
 
   
Signature-ID..................................... 1
Precedence....................................... 1
Signature Name................................... Bcast deauth
Type............................................. Standard
FrameType........................................ management
State............................................ enabled
Action........................................... report
Tracking......................................... per Signature and Mac
Signature Frequency.............................. 50 pkts/interval
Signature Mac Frequency.......................... 30 pkts/interval
Interval......................................... 1 sec
Quiet Time....................................... 300 sec
Description...................................... Broadcast Deauthentication Frame
Patterns:
                0:0x00c0:0x03ff
                4:0x01:0x01
 
   
 
   
Signature-ID..................................... 1
Precedence....................................... 2
Signature Name................................... NULL probe resp 1
Type............................................. Standard
FrameType........................................ management
State............................................ enabled
Action........................................... report
Tracking......................................... per Signature and Mac
Signature Frequency.............................. 50 pkts/interval
Signature Mac Frequency.......................... 30 
pkts/intervalInterval......................................... 1 sec
Quiet Time....................................... 300 sec
Description...................................... NULL Probe Response - Zero length SSID 
element
Patterns:
                0:0x0050:0x03ff
                36:0x0000:0xffff
 
   
> show wps summary
 
   
Client Exclusion Policy
  Excessive 802.11-association failures.......... Enabled
  Excessive 802.11-authentication failures....... Enabled
  Excessive 802.1x-authentication................ Enabled
  Network access control failure................. Enabled
  IP-theft....................................... Enabled
  Excessive Web authentication failure........... Enabled
 
   
Trusted AP Policy
  Mis-configured AP Action....................... Alarm Only
    Enforced encryption policy................... none
    Enforced preamble policy..................... none
    Enforced radio type policy................... none
    Validate SSID................................ Disabled
  Alert if Trusted AP is missing................. Disabled
  Trusted AP timeout............................. 120
 
   
Untrusted AP Policy
  Rogue Location Discovery Protocol.............. Disabled
    RLDP Action.................................. Alarm Only
  Rogue APs
    Automatically contain rogues advertising .... Alarm Only
    Detect Ad-Hoc Networks....................... Alarm Only
  Rogue Clients
    Validate rogue clients against AAA........... Disabled
    Detect trusted clients on rogue APs.......... Alarm Only
  Rogue AP timeout............................... 1200
 
   
Signature Policy
  Signature Processing........................... Enabled

Related Commands

show wps ap-authentication
show wps cids-sensor detail
show wps cids-sensor summary
show wps mfp
show wps shun-list
show wps signature events {standard | custom}
show wps signature events summary
show wps signature summary
show wps summary
config wps ap-authentication
config wps cids-sensor
config wps mfp
config wps rogue-ap
config wps shun-list
config wps signature
config wps signature frequency
config wps signature interval
config wps signature mac-frequency
config wps signature quiet-time
config wps signature reset
debug wps

show wps ap-authentication

To display the access point neighbor authentication configuration on the controller, use the show wps ap-authentication command.

show wps ap-authentication summary

Syntax Description

show

Command action.

wps

Displays WPS configuration.

ap-authentication

AP neighbor authentication config

summary

Displays the WPS summary.


Defaults

None.

Examples

> show wps ap-authentication summary
 
   
AP neighbor authentication is <disabled>.
 
   
Authentication alarm threshold is 1.
RF-Network Name: <B1>
 
   

Related Commands

show wps
show wps cids-sensor detail
show wps cids-sensor summary
show wps summary
config wps ap-authentication
config wps cids-sensor
config wps rogue-ap

show wps cids-sensor detail

To display detailed information on a specified WPS IDS sensor, use the show wps cids-sensor detail command.

show wps cids-sensor detail index

Syntax Description

index

Specifies the IDS sensor index value.


Command History

Release
Modification

4.1

This command was introduced.


Examples

> show wps cids-sensor detail 1
 
   
IP Address....................................... 10.0.0.51
Port............................................. 443
Query Interval................................... 60
Username......................................... Sensor_user1
Cert Fingerprint................................. SHA1: 00:00:00:00:00:00:00:00:
00:00:00:00:00:00:00:00:00:00:00:00
Query State...................................... Disabled
Last Query Result................................ Unknown
Number of Queries Sent........................... 0
 
   

Related Commands

show wps
show wps ap-authentication
show wps cids-sensor summary
show wps summary
config wps ap-authentication
config wps cids-sensor

show wps cids-sensor summary

To display IDS sensor summary information, use the show wps cids-sensor summary command.

show wps cids-sensor summary

Syntax Description

This command has no arguments or keywords.

Command History

Release
Modification

4.1

This command was introduced.


Examples

> show wps summary
 
   
Configured IDS Sensors
 
   
Index  Server Address    Port    State      Intvl   Last Query
-----  ----------------  ------  ---------  ------  --------------
1      10.0.0.51         443     Disabled   60      Unknown
 
   

Related Commands

show wps
show wps ap-authentication
show wps cids-sensor detail
show wps summary
config wps ap-authentication
config wps cids-sensor

show wps mfp

To display Management Frame Protection (MFP) information, use the show wps mfp command.

show wps mfp {summary | statistics}

Syntax Description

show

Command action.

wps

Displays WPS configuration.

mfp

Displays Management Frame Protection information.

summary

Displays MFP configuration and status.

statistics

Displays MFP statistics.


Examples

> show wps mfp summary
 
   
Global Infrastructure MFP state.................. DISABLED (*all infrastructure
settings are overridden)
Controller Time Source Valid..................... False
 
   
                                    WLAN       Infra.      Client
WLAN ID  WLAN Name                  Status     Protection  Protection
-------  -------------------------  ---------  ----------  ----------
1        homeap                     Disabled   *Enabled    Optional but inactive (WPA2 not configured)
2        7921                       Enabled    *Enabled    Optional but inactive (WPA2 not configured)
3        open1                      Enabled    *Enabled    Optional but inactive (WPA2 not configured)
4        7920                       Enabled    *Enabled    Optional but inactive (WPA2 not configured)
 
   
                      Infra.             Operational     --Infra. Capability--
AP Name               Validation  Radio  State           Protection  Validation
--------------------  ----------  -----  --------------  ----------  ----------
AP1252AG-EW           *Enabled    b/g    Down            Full        Full
                                  a      Down            Full        Full
 
   
>show wps mfp statistics
 
   
BSSID             Radio Validator AP         Last Source Addr  Found  Error Type     Count      Frame Types
----------------- ----- -------------------- ----------------- ------ -------------- ---------- -----------
no errors
 
   

Related Commands

show wps ap-authentication
show wps cids-sensor detail
show wps cids-sensor summary
show wps summary
config wps ap-authentication
config wps cids-sensor
config wps rogue-ap
config wps mfp

show wps shun-list

To display IDS sensor shun list, use the show wps shun-list command.

show wps shun-list

Syntax Description

This command has no arguments or keywords

Defaults

None

Examples

> show wps shun-list 
 
   

Related Commands

config wps shun-list

show wps signature events {standard | custom}

To display more information on the attacks detected by a particular standard or custom signature, use the show wps signature events summary command.

show wps signature events {standard | custom} precedence# summary

show wps signature events {standard | custom} precedence# detailed per-signature source_mac

show wps signature events {standard | custom} precedence# detailed per-mac source_mac

Syntax Description

standard | custom

Specifies the type of IDS signature to display.

precedence#

Specifies the signature precedence identification.

summary

Displays tracking signature summary information.

detailed

Displays tracking source MAC address detail information.

per-signature

Displays MAC address tracking information per signature source.

source_mac

Specifies the MAC address of the source.

per-mac

Displays MAC address tracking information per MAC address source.


Examples

To display information on the attacks detected by standard signature 1, use this command:
 
   
> show wps signature events standard 1 summary
 
   
Precedence....................................... 1
Signature Name................................... Bcast deauth
Type............................................. Standard
Number of active events.......................... 2
 
   
Source MAC Addr    Track Method   Frequency # APs Last Heard
-----------------  -------------- --------- ----- ------------------------
00:a0:f8:58:60:dd  Per Signature  50        1     Wed Oct 25 15:03:05 2006
00:a0:f8:58:60:dd  Per Mac        30        1     Wed Oct 25 15:02:53 2006

Related Commands

config wps signature
config wps signature frequency
config wps signature interval
config wps signature mac-frequency
config wps signature quiet-time
config wps signature reset
show wps signature events summary
show wps signature summary
show wps summary

show wps signature events summary

To see the number of attacks detected by the enabled signatures, use the show wps signature events summary command.

show wps signature events summary

Syntax Description

This command has no arguments or keywords.

Examples

> show wps signature events summary
 
   
Precedence  Signature Name       Type      # Events
----------  -------------------- --------  --------
1           Bcast deauth         Standard      2
2           NULL probe resp 1    Standard      1

Related Commands

config wps signature
config wps signature frequency
config wps signature interval
config wps signature mac-frequency
config wps signature quiet-time
config wps signature reset
show wps signature events {standard | custom}
show wps signature summary
show wps summary

show wps signature summary

To see individual summaries of all of the standard and custom signatures installed on the controller, use the show wps signature summary command.

show wps signature summary

Syntax Description

This command has no arguments or keywords.

Examples

> show wps signature summary

Signature-ID..................................... 1
Precedence....................................... 1
Signature Name................................... Bcast deauth
Type............................................. standard
FrameType........................................ management
State............................................ enabled
Action........................................... report
Tracking......................................... per Signature and Mac
Signature Frequency.............................. 50 pkts/interval
Signature Mac Frequency.......................... 30 pkts/interval
Interval......................................... 1 sec
Quiet Time....................................... 300 sec
Description...................................... Broadcast Deauthentication Frame
Patterns:
                0(Header):0x00c0:0x00ff
                4(Header):0x01:0x01
...

Related Commands

config wps signature
config wps signature frequency
config wps signature interval
config wps signature mac-frequency
config wps signature quiet-time
config wps signature reset
show wps signature events {standard | custom}
show wps signature events summary
show wps summary

show wps summary

To display WPS summary information, use the show wps summary command.

show wps summary

Syntax Description

This command has no arguments or keywords.

Examples

> show wps summary
 
   
Client Exclusion Policy
  Excessive 802.11-association failures.......... Enabled
  Excessive 802.11-authentication failures....... Enabled
  Excessive 802.1x-authentication................ Enabled
  IP-theft....................................... Enabled
  Excessive Web authentication failure........... Enabled
 
   
Trusted AP Policy
  Management Frame Protection.................... Disabled
  Mis-configured AP Action....................... Alarm Only
    Enforced encryption policy................... none
    Enforced preamble policy..................... none
    Enforced radio type policy................... none
    Validate SSID................................ Disabled
  Alert if Trusted AP is missing................. Disabled
  Trusted AP timeout............................. 120
 
   
Untrusted AP Policy
  Rogue Location Discovery Protocol.............. Disabled
    RLDP Action.................................. Alarm Only
  Rogue APs
    Rogues AP advertising my SSID................ Alarm Only
    Detect and report Ad-Hoc Networks............ Enabled
  Rogue Clients
    Validate rogue clients against AAA........... Enabled
    Detect trusted clients on rogue APs.......... Alarm Only
  Rogue AP timeout............................... 1300
 
   
Signature Policy
  Signature Processing........................... Enabled
...

Related Commands

config wps signature
config wps signature frequency
config wps signature interval
config wps signature mac-frequency
config wps signature quiet-time
config wps signature reset
show wps signature events {standard | custom}
show wps signature events summary
show wps signature summary

Configuring Controller Settings

Use the config commands to configure Cisco Wireless LAN controller options and settings.

Config 802.11x Commands

Use the config 802.11x commands to configure settings for an 802.11a, 802.11b, or other supported 802.11 network.

config {802.11a | 802.11b} 11nsupport

To enable 802.11n support on the network, use the config {802.11a | 802.11b} 11nsupport command.

config {802.11a | 802.11b} 11nsupport {enable | disable}

Syntax Description

config

Configure parameters.

802.11a

802.11a Cisco radio.

802.11b

802.11b Cisco radio.

11nsupport

Support for 802.11n devices.

enable

Enable support.

disable

Disable support.


Defaults

None.

Examples

> config 802.11a 11nsupport enable

Related Commands

config {802.11a | 802.11b} 11nsupport mcs tx

config {802.11a | 802.11b} 11nsupport a-mpdu tx priority

config 802.11a disable network

config 802.11a disable

config 802.11a channel ap

config 802.11a txpower ap

config 802.11a chan_width

config {802.11a | 802.11b} 11nsupport a-mpdu tx priority

To specify the aggregation method used for 802.11n packets, use the config {802.11a | 802.11b} 11nsupport a-mpdu tx priority command.

config {802.11a | 802.11b} 11nsupport a-mpdu tx priority {0-7 | all} {enable | disable}


Note Aggregation is the process of grouping packet data frames together rather than transmitting them separately. Two aggregation methods are available: Aggregated MAC Protocol Data Unit (A-MPDU) and Aggregated MAC Service Data Unit (A-MSDU). A-MPDU is performed in the software whereas A-MSDU is performed in the hardware.


Syntax Description

config

Configure parameters.

802.11a

802.11a Cisco radio.

802.11b

802.11b Cisco radio.

11nsupport

Support for 802.11n devices.

a-mpdu tx priority

Aggregated MAC Protocol Data Unit priority levels assigned per traffic type:

1—Background

2—Spare

0—Best effort

3—Excellent effort

4—Controlled load

5—Video, less than 100-ms latency and jitter

6—Voice, less than 10-ms latency and jitter

7—Network control

all—Configure all of the priority levels at once.

Note Configure the priority levels to match the aggregation method used by the clients.

enable

The traffic associated with the priority level uses A-MPDU transmission.

disable

The traffic associated with the priority level uses A-MSDU transmission.


Defaults

All priorities, except 5 and 6, are enabled by default. Priorities 5 and 6 are disabled by default.

Examples

> config 802.11a 11nsupport a-mpdu tx priority all enable

Related Commands

config {802.11a | 802.11b} 11nsupport mcs tx

config 802.11a disable network

config 802.11a disable

config 802.11a channel ap

config 802.11a txpower ap

config 802.11a chan_width

config {802.11a | 802.11b} 11nsupport antenna

To use of specific antennas for a particular access point, enter this command:

config {802.11a | 802.11b} 11nsupport antenna {tx | rx} Cisco_AP {A | B | C} {enable | disable}

Syntax Description

config

Configure parameters.

802.11a

802.11a Cisco radio.

802.11b

802.11b Cisco radio.

11nsupport antenna

Support for 802.11n devices.

tx

Enable the antenna to transmit.

rx

Enable the antenna to receive.

Cisco_AP

Specify the access point.

A | B | C

The antenna ports. A is the right antenna port, B is the left antenna port, and C is the center antenna port.

enable

Enable support.

disable

Disable support.


Defaults

None.

Examples

config 802.11a 11nsupport antenna tx AP1 C enable

Related Commands

config {802.11a | 802.11b} 11nsupport mcs tx

config 802.11a disable network

config 802.11a disable

config 802.11a channel ap

config 802.11a txpower ap

config 802.11a chan_width

config {802.11a | 802.11b} 11nsupport mcs tx

To specify the modulation and coding scheme (MCS) rates at which data can be transmitted between the access point and the client, use the config {802.11a | 802.11b} 11nsupport mcs tx command.

config {802.11a | 802.11b} 11nsupport mcs tx {0-15} {enable | disable}

Syntax Description

config

Configure parameters.

802.11a

802.11a Cisco radio.

802.11b

802.11b Cisco radio.

11nsupport

Support for 802.11n devices.

mcs tx

Modulation and coding scheme data rates:

0 (7 Mbps)

1 (14 Mbps)

2 (21 Mbps)

3 (29 Mbps)

4 (43 Mbps)

5 (58 Mbps)

6 (65 Mbps)

7 (72 Mbps)

8 (14 Mbps)

9 (29 Mbps)

10 (43 Mbps)

11 (58 Mbps)

12 (87 Mbps)

13 (116 Mbps)

14 (130 Mbps)

15 (144 Mbps)

enable

Enable support.

disable

Disable support.


Defaults

None.

Examples

> config 802.11a 11nsupport mcs tx 5 enable

Related Commands

config {802.11a | 802.11b} 11nsupport

config wlan wmm required

config {802.11a | 802.11b} 11nsupport a-mpdu tx priority

config 802.11a disable network

config 802.11a disable

config 802.11a channel ap

config 802.11a txpower ap

config 802.11a chan_width

config {802.11a | 802.11b} cac video acm

To enable or disable video Call Admission Control (CAC) for the 802.11a or 802.11b/g network, use the config {802.11a | 802.11b} cac video acm command.

config {802.11a | 802.11b} cac video acm {enable | disable}

Syntax Description

config

Configure parameters.

802.11a | 802.11b

802.11a or 802.11b Cisco radio.

cac

Call Admission Control parameters.

video

Video traffic parameters.

acm

Admission control.

enable | disable

Enable or disable video CAC.


Defaults

Disabled.

Usage Guidelines

Call Admission Control (CAC) commands require that the WLAN you are planning to modify is configured for Wi-Fi Multimedia (WMM) protocol and the quality of service (QoS) level be set to Platinum.

Before you can configure CAC parameters on a network, you must complete the following prerequisites:

Disable all WLANs with WMM enabled: config wlan disable wlan_id

Disable the radio network you wish to configure: config {802.11a | 802.11bdisable network

Save the new configuration: save config

Enable voice or video CAC for the network you wish to configure: config {802.11a | 802.11bcac voice acm enable, or
config {802.11a | 802.11bcac video acm enable

For complete instructions, refer to the "Configuring Voice and Video Parameters" section in the "Configuring Controller Settings" chapter of the Cisco Wireless LAN Controller Configuration Guide for your release.

Examples

> config 802.11a cac video acm enable
> config 802.11b cac video acm disable

Related Commands

config {802.11a | 802.11b} cac video max-bandwidth

config {802.11a | 802.11b} cac video roam-bandwidth

config {802.11a | 802.11b} cac video tspec-inactivity-timeout

config {802.11a | 802.11b} cac video max-bandwidth

To set the percentage of the maximum bandwidth allocated to clients for video applications on the 802.11a or 802.11b/g network, use the config {802.11a | 802.11b} cac video max-bandwidth command.

config {802.11a | 802.11b} cac video max-bandwidth bandwidth

Syntax Description

config

Configure parameters.

802.11a | 802.11b

802.11a or 802.11b Cisco radio.

cac

Call Admission Control parameters.

video

Video traffic parameters.

max-bandwidth

Specify the percentage of the maximum allocated bandwidth for video applications on the selected radio band.

bandwidth

A bandwidth percentage value from 0-100%.


Defaults

0%

Usage Guidelines

The maximum radio frequency (RF) bandwidth cannot exceed 100% for voice + video. Once the client reaches the value specified, the access point rejects new calls on this network.


Note If this parameter is set to zero (0), the controller assumes that the operator does not want to allocate any bandwidth and therefore allows all bandwidth requests.


Call Admission Control (CAC) commands require that the WLAN you are planning to modify is configured for Wi-Fi Multimedia (WMM) protocol and the quality of service (QoS) level be set to Platinum.

Before you can configure CAC parameters on a network, you must complete the following prerequisites:

Disable all WLANs with WMM enabled: config wlan disable wlan_id

Disable the radio network you wish to configure: config {802.11a | 802.11bdisable network