The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
This appendix provides information on the part numbers of the router variants, SFP modules, product, power, and environmental specifications of the Cisco ASR 901S Series Aggregation Services Router components. It also contains safety and compliance information and technical specifications of the antenna.
The tables in this section list the hardware parts and part numbers available for the Cisco ASR 901S Series Aggregation Services Router.
Product ID (PID) |
Cisco Part Number (CPN) |
Options |
Description |
A901S-4SG-F-D |
4 external ports (4 SFP) + 1 gland interface for internal ports (2 Cu), DC power supply |
||
A901S-3SG-F-D |
4 external ports (3 SFP +1 Cu) + 1 gland interface for internal ports (1 Cu), DC power supply |
||
A901S-2SG-F-D |
4 external ports (2 SFP + 2 Cu) + 1 gland interface for internal ports , DC power supply |
||
A901S-3SG-F-AH |
3 external ports (3 SFP) + 1 gland interface for internal ports (2 Cu), AC PSU, 1 sec holdover for 1 PoE+ |
||
A901S-2SG-F-AH |
3 external ports (2 SFP + 1 Cu) + 1 gland interface for internal ports (1 Cu) , AC PSU, 1 sec holdover for 1 PoE+ |
||
72-5483-01 |
A901S-CABLE-SM |
Internal to external port fiber patch cable, single mode (minimum order: 1; maximum order: 4) |
|
72-5510-01 |
A901S-CABLE-MM |
Internal to external port fiber patch cable, multi mode (minimum order: 1; maximum order: 4) |
|
69-2664-01 |
A901S-MNT-POLE |
Pole Mount Kit accessories (maximum order: 1) |
|
69-2665-01 |
A901S-MNT-WALL |
Wall Mount Kit accessories (maximum order: 1) |
|
CAB-CONSOLE-RJ45 |
Console cable 6 feet with RJ45 and DB9F (maximum order: 1) |
||
51-6796-01 |
A901S-INSTALL-KIT |
Installation kit includes special screw driver (maximum order: 1) |
|
29-8328-01 |
Dust cap for antenna (maximum order: 1) |
||
72-5561-01 |
A901S-DC-O-1M= |
DC power cable, 16 AWG,3 core, 600 water resistant,1 meter, open end (maximum order: 1) |
|
SL-A901-B |
Software license: Base license (maximum 1) |
||
SL-A901-A= |
Software license: Advanced Metro IP license (includes all features provided in the Base License, plus advanced features) (maximum 1) |
||
SL-A901-T= |
Software license: ASR901 Timing Feature License (1588 Boundary Clock) (maximum 1) |
The router supports a wide range of SFP optics modules. The following table lists their part numbers. The operational temperatures supported for the optics are defined by individual SFP or SFP+ modules.
Type |
Part Number |
Ethernet SFP |
GLC-LH-SM, GLC-LH-SMD, GLC-EX-SMD, GLC-ZX-SMD, GLC-LX-SM-RGD, GLC-SX-MM, GLC-SX-MMD, GLC-SX-MM-RGD, GLC-ZX-SM, GLC-ZX-SM-RGD, GLC-BX-U, GLC-BX-D, SFP-GE-L, SFP-GE-S, SFP-GE-Z, GLC-FE-100FX-RGD, CWDM-SFP-1470, CWDM-SFP-1490, CWDM-SFP-1510, CWDM-SFP-1530, CWDM-SFP-1550, CWDM-SFP-1570, CWDM-SFP-1590, CWDM-SFP-1610, ranging from DWDM-SFP-3033 to DWDM-SFP-6141 (40 wavelengths) |
The following table lists the part numbers of the spares supported on the Cisco ASR 901S Series Aggregation Services Router.
Product ID (PID) |
Cisco Part Number (CPN) |
Description |
CABIP65C-SM-1M= |
72-5541-01 |
Custom fiber cable [C], connects from external A901S port through the gland of any radio cell , 1 M in length, single mode |
CABIP65C-MM-1M= |
72-5547-01 |
Custom fiber cable {C}, connects from external A901S port through the gland of any radio cell , 1 M in length, multi mode |
A901S-DC-O-1M= |
72-5561-01 |
DC power cable, 16 AWG,3 core,600 water resistant,1 meter, open end |
A901S-CABLE-SM= |
72-5561-01 |
Internal fiber patch cable, single mode |
A901S-CABLE-MM= |
72-5510-01 |
Internal fiber patch cable, multi mode |
A901S-MNT-POLE= |
69-2664-01 |
Pole Mount Kit accessories |
A901S-MNT-WALL= |
69-2665-01 |
Wall Mount Kit accessories |
SL-A901-A= |
Software license: Advanced Metro IP license (includes all features provided in the Base License, plus advanced features). |
|
SL-A901-T= |
Software license: ASR901 Timing Feature License (1588 Boundary Clock) |
The following tables list product, power, and environmental specifications, and safety and compliance information for the Cisco ASR 901S Series Aggregation Services Router.
Description |
Specifications |
Power consumption |
|
AC input voltage and frequency |
100-240 Vac, 50-60 Hz |
DC power rating |
|
Power connector |
Description |
Specifications |
Operational temperature |
-40 to 149°F (-40 to 65°C); optics used may limit the temperature range -40 to 114.8°F (-40 to 46°C) plus solar radiation (GR-3108 Issue 2, Class 4) |
Nonoperational temperature |
-40 to 158°F (-40 to 70°C) -40 to 113°F (-40 to +45°C) with solar loading |
Non-operational temperature (Transportation or Storage, or both) |
-40°F (-40°C) for 72 hrs 158°F (70°C) for 72 hrs Section 4.1.1.1 of GR-63 or Section 9.1 of ATIS-0600010.2007 104°F (40°C) and 95% RH for 96 hrs Section 4.1.1.3 of GR-63 or Section 9.3 of ATIS-0600010.2007 |
Operational humidity |
<5% to 100%, RH condensing (GR-3108, Issue 2, Class 4) |
Relative humidity |
10% to 85%, noncondensing, ±5 % |
Non-operational humidity |
5% to 95% RH |
Operational altitude |
13,000 ft (4000 m) maximum 104°F (40°C) ambient Meets applicable requirements Section 8 of ATIS 0600010.01.2008 Equipment operates as intended between sea-level and 6000 ft (1800 m) at 100.4°F (38°C) plus solar loading Equipment operates as intended between 6000 ft (1800 m) and 13000 ft (3900 m) at 69.8°F (21°C) plus solar loading for the equipment with pressure sensitive components (GR-3108 Issue 2, Class 4) |
Non-operational altitude |
13000 ft |
Operational mechanical shock |
For the range of 9.92 to 12.84 lbs (4.5 to 9.0 kgs), target minimum velocity change input is 83 in./sec (2.11 m/s) and effective few fall drop height is 5.0 in. (0.127 m) (ENG-3396, Section 4.2.4) |
Non-operational mechanical shock |
For the range of 9.92 to 12.84 lbs (4.5 to 9.0 kgs) the range of peak acceleration input (trapezoidal pulse is between 55 to 70 G , with minimum velocity change of 166 in./sec (4.22 m/s) (ENG-3396, Section 4.3.4) |
Operational vibration |
All product categories: 0.41 Grms from 3 to 500 Hz with spectral break points of 0.0005 G/2/Hz at 10 Hz and 200 Hz and 5 dB roll off at each end. (ENG-3396, Section .2.5) |
Non-operational vibration |
All product categories: 1.2 rms from 3 to 500 Hz with spectral break points of 0.0065 G/2/Hz. At 10 Hz and 100 Hz and 5 dB roll off at each end. (ENG-339611. Rev2 [Test Method: IEC-682-32]) |
Cold start |
-40°F (-40°C) |
Hot start |
114.8°F (46°C) plus solar radiation (optional 149°F [65°C]) (GR-3108 Issue 2, Class 4) |
Non-operational Free-Fall Drop |
Drop the unpackaged sample 3.9" onto a rigid surface. Drop 1 face, 2 edges, and 2 corners. (ENG-339611.Rev2 [Test Method: IEC-68-2-32]) |
Pole mount kit non-operational vibration |
Dwells at resonant frequency for 100,000 cycles at 3G in each axis. |
Earthquake, Zone 4 |
Equipment complies with earthquake tests per sections 4.4.1 and 5.4.1 of GR-63 or ANSI TI-329 (GR-3108 Issue 2) |