Cisco ASR 903 Router Chassis Software Configuration Guide
Installing and Upgrading Software
Downloads: This chapterpdf (PDF - 235.0KB) The complete bookPDF (PDF - 1.89MB) | Feedback

Installing and Upgrading Software

Table Of Contents

Installing and Upgrading Software

Software Packaging on the Cisco ASR 903 Series Router

Cisco ASR 903 Series Router Software Overview

Understanding Cisco ASR 903 Series Router Software Packages

Provisioning Files

Upgrading Field Programmable Hardware Devices

File Systems on the Cisco ASR 903 Series Router

Bootflash Space Requirements

System Requirements

RP Memory Recommendations

ROMmon Version Requirements

Determining the Software Version

Cisco IOS XE 3S to Cisco IOS Version Number Mapping

Autogenerated Files and Directories

Understanding In-Service Software Upgrades

Restrictions for an ISSU Upgrade

Single-Command Upgrade Overview

Downloading an Image

Setting the Router to Boot in Sub-Package Mode

Completing a Single Command Software Upgrade

Preparing for Installation

Completing the Single Command Upgrade

Software Upgrade Examples

Single Command Software Upgrade


Installing and Upgrading Software


This chapter describes how to update software on the Cisco ASR 903 Series Router and includes the following sections:

Software Packaging on the Cisco ASR 903 Series Router

File Systems on the Cisco ASR 903 Series Router

System Requirements

Autogenerated Files and Directories

Understanding In-Service Software Upgrades

Downloading an Image

Setting the Router to Boot in Sub-Package Mode

Completing a Single Command Software Upgrade

Software Upgrade Examples

Software Packaging on the Cisco ASR 903 Series Router

This section covers the following topics:

Cisco ASR 903 Series Router Software Overview

Provisioning Files

Upgrading Field Programmable Hardware Devices

Cisco ASR 903 Series Router Software Overview

The Cisco IOS XE software supports two software installation types:

Consolidated image—A single software image containing a full collection of software packages. Consolidated mode provides a simplified installation and can be stored in bootflash, a TFTP server, or a network server. Consolidated mode is not supported on the Cisco ASR 903 Series Router.

Sub-package—One or more sub-images extracted from the consolidated image. Sub-package mode provides optimized memory usage and requires that you store files in the bootflash directory. The Cisco ASR 903 Series Router supports sub-package mode.


Caution The Cisco ASR 903 Series Router supports sub-package mode; consolidated mode is not supported.

Understanding Cisco ASR 903 Series Router Software Packages

Table 5-1 summarizes the sub-packages within a consolidated image.

Table 5-1 Individual Sub-Packages

Sub-Package
Purpose

RPBase

Route Switch Processor (RSP) operating system

RPControl

Control plane processes between IOS process and the rest of the platform.

RPAccess

Handles security features including Secure Socket Layer (SSL) and Secure Shell (SSH)

RPIOS

Cisco IOS kernel, which is where IOS features are stored and run.

Note Each consolidated image has a unique RPIOS package.

FP Pkg

Controls FP daemons.

IO Pkg

Controls input/output driver daemons.

LC Base

Controls basic kernel functions including runtime, initialization scripts, and chassis control daemons.


Provisioning Files

Provisioning files manage the boot process when the Cisco ASR 903 Series Router is configured to run using individual sub-packages. The provisioning file manages the bootup of each individual sub-package. Provisioning files are extracted automatically when individual sub-package files are extracted from a consolidated package. Provisioning files are not necessary for running the router using the complete consolidated package.

Upgrading Field Programmable Hardware Devices

Cisco IOS XE supports upgradeable firmware for field programmable hardware devices such as interface modules (IMs). Generally an upgrade is only necessary in cases where a system message indicates that an upgrade is required or a Cisco technical support representative suggests an upgrade.

The procedures in this chapter describe how to upgrade the firmware on Cisco ASR 903 Series Router.

File Systems on the Cisco ASR 903 Series Router

Table 5-5 provides a list of file systems that can be seen on the Cisco ASR 903 Series Router.

Table 5-2 File Systems 

File System
Description

bootflash:

The boot flash memory file system on the active RSP.

cns:

The Cisco Networking Services file directory.

nvram:

Router NVRAM. You can copy the startup configuration to NVRAM or from NVRAM.

stby-bootflash:

The boot flash memory file system on the standby RSP.

stby-harddisk:

The hard disk file system on the standby RSP.

stby-usb[0-1]:

The Universal Serial Bus (USB) flash drive file systems on the standby RSP.

system:

The system memory file system, which includes the running configuration.

tar:

The archive file system.

tmpsys:

The temporary system files file system.

usb[0-1]:

The Universal Serial Bus (USB) flash drive file systems on the active RSP.


If you see a file system not listed in Table 5-5, enter the ? help option or see the copy command reference for additional information on that file system.

Bootflash Space Requirements

The in-service software upgrade process requires a minimum of 600 MB available space in bootflash memory.

System Requirements

The following sections describe the system requirements for the Cisco ASR 903 Series Router software:

RP Memory Recommendations

ROMmon Version Requirements

Determining the Software Version

Cisco IOS XE 3S to Cisco IOS Version Number Mapping

RP Memory Recommendations

The Cisco IOS XE 3S images and packages available vary based on the route processor installed in the system.

Table 3 describes the consolidated package images, individual software subpackage contents, and memory recommendations for each RSP.

Table 3 Memory Recommendations for the Cisco ASR 903 Series Router Consolidated Package Image

Platform
Image Name
Software Image
Individual Subpackage Contents
DRAM
Memory
Cisco ASR 903 Router

Cisco ASR 903 Series RSP1 UNIVERSAL W/O CRYPTO

asr903rsp1-universal.version.bin

asr903rsp1-rpbase.version.pkg

2 GB (RSP1)

4 GB (RSP1+)

asr903rsp1-rpcontrol.version.pkg

asr903rsp1-rpaccess.version.pkg

asr903rsp1-rpios-universal.version.
pkg

asr903rsp1-espbase.version.pkg

asr903rsp1-sipbase.version.pkg

asr903rsp1-sipspa.version.pkg

asr903rsp1-packages-universal.
version.conf

packages.conf

Cisco ASR 903 Router

Cisco ASR 903 Series RSP1 UNIVERSAL

asr903rsp1-universalk9.version.bin

asr903-hw-programmables.version.
pkg

2 GB (RSP1)

4 GB (RSP1+)

asr903rsp1-espbase.version.pkg

asr903rsp1-packages-universalk9.
version.conf

asr903rsp1-rpaccess.version.pkg

asr903rsp1-rpbase.version.pkg

asr903rsp1-rpcontrol.version.pkg

asr903rsp1-rpios-universalk9.version.pkg

asr903rsp1-sipbase.version.pkg

asr903rsp1-sipspa.version.pkg

packages.conf

Cisco ASR 903 Router

Cisco ASR 903 Series RSP1 UNIVERSALNPE

asr903rsp1-universalk9_npe.
version.bin

asr903-hw-programmables.version.
pkg

2 GB (RSP1)

4 GB (RSP1+)

asr903rsp1-espbase.version.pkg

asr903rsp1-packages-universalk9.
version.conf

asr903rsp1-rpaccess.version.pkg

asr903rsp1-rpbase.version.pkg

asr903rsp1-rpcontrol.version.pkg

asr903rsp1-rpios-universalk9_npe.
version.pkg

asr903rsp1-sipbase.version.pkg

asr903rsp1-sipspa.version.pkg

packages.conf


ROMmon Version Requirements

ROMmon Release 15.3(1r)S1 is the recommended release for all ROMmon upgradeable components. For more information about ROMmon images, see Release Notes for the Cisco ASR 903 Router.

Determining the Software Version

You can use the show version installed command to list the installed sub-packages on the router.

Cisco IOS XE 3S to Cisco IOS Version Number Mapping

Each version of Cisco IOS XE 3S has an associated Cisco IOS version. Table 4 lists these mappings for Release 3.50S and forward.

Table 4 Cisco IOS XE 3S to Cisco IOS Version Number Mapping 

Cisco IOS XE 3S Version
Cisco IOS Version

3.5.0S

15.2(1)S

3.5.1S

15.2(1)S1

3.6.0S

15.2(2)S

3.6.1S

15.2(2)S1

3.7.0S

15.2(4)S


The Cisco ASR 903 Series Router does not support IOS XE versions prior to 3.50S.

Autogenerated Files and Directories

Table 5-5 provides a list and descriptions of autogenerated files on the Cisco ASR 903 Series Router.


Caution Do not alter any autogenerated file in the bootflash: directory should not be deleted, renamed, moved, or altered in any way unless directed by customer support; altering these files can have unpredictable consequences for system performance.

Table 5-5 Autogenerated Files 

File or Directory
Description

crashinfo files

A crashinfo file may appear in the bootflash: file system.

Crashinfo files are useful for tuning and troubleshooting, but are not related to router operations: you can erase them without impacting the router's performance.

core files

The bootflash/core directory is the storage area for .core files.


Caution Do not erase or move the core directory.

lost+found directory

This directory is created on bootup if a system check is performed. Its appearance is completely normal and does not indicate any issues with the router.

tracelogs files

The storage area for trace files is bootflash/tracelogs.

Trace files are useful for troubleshooting; you can access trace files using diagnostic mode to gather information related to the IOS failure.


Caution Do not erase or move the tracelog directory.

Understanding In-Service Software Upgrades

The in-service software upgrade (ISSU) process allows you to update the router software with minimal service interruption. The following sections describe the ISSU process on the Cisco ASR 903 Series Router:

Restrictions for an ISSU Upgrade

Single-Command Upgrade Overview

Restrictions for an ISSU Upgrade

The following restrictions apply when completing an in-service software upgrade on the Cisco ASR 903 Series Router.

ISSU is not supported for single RSP configurations.

Cisco IOS XE software compatibility is supported only between identical image types. Cross-image-type upgrades or installations (such as from an advipservicesk9 image to an advipservicesk9image) are not supported in the ISSU process.

Running two different image types simultaneously is not supported.

In-service upgrades from one package mode to another are not supported.

The procedures in this document represent supported and tested installation sequences; following alternative procedures for upgrading the Cisco ASR 903 Series Router software can cause unexpected behavior.

Single-Command Upgrade Overview

The Cisco ASR 903 Series Router supports a single-command upgrade for ISSU. A single command upgrade allows you to install a complete set of sub-packages using a single command. This command will install the complete set of packages on the standby RSP, and then perform a rolling reload of the interface modules on the active RSP. After the interface modules are reloaded, an HA switchover will be performed and the complete set of sub-packages will be installed on the new (i.e. previously active) RSP. For information about completing a single-command upgrade, see Completing a Single Command Software Upgrade.

Downloading an Image

Follow these steps to download a Cisco ASR 903 Series Router software image.


Caution Ensure that you have chosen an upgrade image that is supported by your current software version

Step 1 

Router# mkdir issu
Create directory filename [issu]?
Created dir bootflash:/issu
 
        

Creates an ISSU directory in bootflash.

Step 2 

 
        

Download the consolidated image file from Cisco.com.

Step 3 

Router# copy filename directory

Example:

Router# copy asr903rsp1-adventerprisek9.upgrade.bin bootflash:/issu

Copy the consolidated image file to the ISSU bootflash directory.

Note Do not copy the packages.conf file to a new directory after expanding the package. It is required that the packages.conf file and sub package files exist in the same directory.

Setting the Router to Boot in Sub-Package Mode

Follow these steps to configure the router to boot in sub-package mode.


Note For instructions on how to download an image file, see Downloading an Image.


 
Command
Purpose

Step 1 

Router# configure terminal

Enters configuration mode.

Step 2 

Router(config)# config-register 0x2

Sets the configuration register so that the router boots using a specified image in NVRAM.

Note If the configuration register value is already set to auto-boot the router, you can skip this step.

Step 3 

exit

Example:

Router(config)# exit

Exits configuration mode and returns to the EXEC command interpreter prompt.

Step 4 

request platform software package expand file source-URL [to destination-URL] [force] [verbose] [wipe]

Router# request platform software package expand file bootflash:issu/asr903rsp1-adventerpri sek9.base.bin

 
        

Expands the consolidated image file on the active RSP.

Step 5 

request platform software package expand file source-URL [to destination-URL] [force] [verbose] [wipe]

Router# request platform software package expand file stby-bootflash:issu/asr903rsp1-advent erprisek9.base.bin

Expands the consolidated image file on the standby RSP.

Note This step applies only if your router has a redundant RSP.

Step 6 

boot system flash [flash-fs:] 
[partition-number:] [filename] 

Router(config)# boot system bootflash:issu/packages.conf

Sets the router to boot using the packages.conf file.

Step 7 

exit

Example:

Router(config)# exit

Exits configuration mode and returns to the EXEC command interpreter prompt.

Step 8 

Router# copy running-config 
startup-config

Saves the configuration.

Step 9 

Router# reload

Reloads the router.

Completing a Single Command Software Upgrade

A single command upgrade updates the active and standby RSPs with a single IOS command. Follow these steps to complete the one-shot upgrade.

Preparing for Installation

Step 1 

 
        

Download the new consolidated image file from Cisco.com. For more information about downloading Cisco software image, see Chapter 1 "Using Cisco IOS XE Software."

Step 2 

 

Open a console session to the active RSP. For instructions on how to open a console session, see Console Port, Telnet, and SSH Handling.

Step 3 

Router# copy filename directory

Example:

Router# copy asr903rsp1-adventerprisek9.upgrade.bi n bootflash:/issu

Copy the new consolidated image file to the active ISSU bootflash directory such that the new image file is in the same location as the existing image file.

Note Do not copy the packages.conf file to a new directory after expanding the package. It is required that the packages.conf file and sub package files exist in the same directory.

Note It is not necessary to copy the new consolidated image file to the standby RSP; the one-shot upgrade process completes this step.

Step 4 

Router# configure terminal

Enters configuration mode.

Step 5 

Router(config)# redundancy
Router(config-red)#

Enters redundancy configuration mode.

Step 6 

Router(config-red)# mode sso

Sets the router in SSO redundancy mode.

Step 7 

end

Example:
Router(config)# end

Exits configuration mode and returns to the EXEC command prompt.

Step 8 

*Jan 12 17:52:26.516: 
%RF-5-RF_TERMINAL_STATE: Terminal 
state reached for (SSO)

Confirms that the router has reached SSO state; wait for this output before proceeding.

Step 9 

Router# copy running-config 
startup-config

Saves the configuration.

Completing the Single Command Upgrade

 
Command
Purpose

Step 1 

request platform software package install node file file-URL [interface-module-delay delay]

Example:

Router# request platform software package install node file bootflash:/issu/asr903rsp1-adventerprisek9.upgrade.bin interface-module-delay 160

Initiates the one-shot installation procedure using the consolidated image file.

Note You can adjust the delay between the OIR of each IM using the interface-module-delay keyword.


Caution We recommend you set the interface-module-delay value to 150 seconds or greater in order to ensure sufficient time for IM software upgrades.

Note Keywords other than interface-module-delay are not supported.

Step 2 

 

The router displays a series of STAGE/SUCCESS messages.

For sample output of a single command upgrade, see Software Upgrade Examples.

Step 3 

Router#

Wait for original active RSP to reboot and return to the console prompt.

Step 4 

 

Switch to the new active console

Step 5 

*Jan 12 17:52:26.516: %RF-5-RF_TERMINAL_STATE: Terminal state reached for (SSO)

Wait for new active console to return to SSO state

Software Upgrade Examples

The following sections provide samples of software upgrades on the Cisco ASR 903 Series Router.

Single Command Software Upgrade

Router# request platform software package install node file bootflash:XE371_k9_0810.bin 
interface-module-delay 150
NOTE: Currently node has booted from a provisioning file
NOTE: Going to start a dual rp sub-packages node ISSU install
 
   
--- Starting initial file path checking ---
Copying bootflash:XE371_k9_0810.bin to stby-bootflash:XE371_k9_0810.bin
Finished initial file path checking
 
   
--- Starting config-register verfication ---
Finished config-register verfication
 
   
--- Starting image file expansion ---
Expanding image file: bootflash:XE371_k9_0810.bin
Image file expanded and copied
Expanding image file: stby-bootflash:XE371_k9_0810.bin
Image file expanded and copied
Finished image file expansion
 
   
 
   
STAGE 1: Installing software on standby RP
==========================================
--- Starting local lock acquisition on R0 ---
Finished local lock acquisition on R0
 
   
--- Starting installation state synchronization ---
Finished installation state synchronization
 
   
--- Starting local lock acquisition on R1 ---
 
   
Finished local lock acquisition on R1
 
   
 
   
 
   
--- Starting file path checking ---
 
   
Finished file path checking
 
   
 
   
 
   
--- Starting image file verification ---
 
   
Checking image file names
 
   
Locating image files and validating name syntax
 
   
  Found asr903rsp1-espbase.BLD_V152_4_S_XE37_THROTTLE_LATEST_20120810_070021.pkg
 
   
  Found asr903rsp1-rpaccess.BLD_V152_4_S_XE37_THROTTLE_LATEST_20120810_070021.pkg
 
   
  Found asr903rsp1-rpbase.BLD_V152_4_S_XE37_THROTTLE_LATEST_20120810_070021.pkg
 
   
  Found asr903rsp1-rpcontrol.BLD_V152_4_S_XE37_THROTTLE_LATEST_20120810_070021.pkg
 
   
  Found 
asr903rsp1-rpios-universalk9_npe.BLD_V152_4_S_XE37_THROTTLE_LATEST_20120810_070021.pkg
 
   
  Found asr903rsp1-sipbase.BLD_V152_4_S_XE37_THROTTLE_LATEST_20120810_070021.pkg
 
   
  Found asr903rsp1-sipspa.BLD_V152_4_S_XE37_THROTTLE_LATEST_20120810_070021.pkg
 
   
Verifying image file locations
 
   
Inspecting image file types
 
   
    WARNING: In-service installation of IOSD package
 
   
    WARNING: requires software redundancy on target RP
 
   
    WARNING: or on-reboot parameter
 
   
    WARNING: Automatically setting the on-reboot flag
 
   
    WARNING: In-service installation of RP Base package
 
   
    WARNING: requires software reboot of target RP
 
   
Processing image file constraints
 
   
Creating candidate provisioning file
 
   
Finished image file verification
 
   
 
   
 
   
--- Starting candidate package set construction ---
 
   
Verifying existing software set
 
   
Processing candidate provisioning file
 
   
Constructing working set for candidate package set
 
   
Constructing working set for running package set
 
   
Checking command output
 
   
Constructing merge of running and candidate packages
 
   
Checking if resulting candidate package set would be complete
 
   
Finished candidate package set construction
 
   
 
   
 
   
--- Starting compatibility testing ---
 
   
Determining whether candidate package set is compatible
 
   
Determining whether installation is valid
 
   
Determining whether installation is valid ... skipped
 
   
Verifying image type compatibility
 
   
Checking IPC compatibility for candidate software
 
   
Checking candidate package set infrastructure compatibility
 
   
Checking infrastructure compatibility with running software
 
   
Checking infrastructure compatibility with running software ... skipped
 
   
Checking package specific compatibility
 
   
Finished compatibility testing
 
   
 
   
 
   
--- Starting list of software package changes ---
 
   
Old files list:
 
   
  Removed asr903rsp1-espbase.2012-08-12_15.26_amprajap.pkg
 
   
  Removed asr903rsp1-rpaccess.2012-08-12_15.26_amprajap.pkg
 
   
  Removed asr903rsp1-rpbase.2012-08-12_15.26_amprajap.pkg
 
   
  Removed asr903rsp1-rpcontrol.2012-08-12_15.26_amprajap.pkg
 
   
  Removed asr903rsp1-rpios-universalk9_npe.2012-08-12_15.26_amprajap.pkg
 
   
  Removed asr903rsp1-sipbase.2012-08-12_15.26_amprajap.pkg
 
   
  Removed asr903rsp1-sipspa.2012-08-12_15.26_amprajap.pkg
 
   
New files list:
 
   
  Added asr903rsp1-espbase.BLD_V152_4_S_XE37_THROTTLE_LATEST_20120810_070021.pkg
 
   
  Added asr903rsp1-rpaccess.BLD_V152_4_S_XE37_THROTTLE_LATEST_20120810_070021.pkg
 
   
  Added asr903rsp1-rpbase.BLD_V152_4_S_XE37_THROTTLE_LATEST_20120810_070021.pkg
 
   
  Added asr903rsp1-rpcontrol.BLD_V152_4_S_XE37_THROTTLE_LATEST_20120810_070021.pkg
 
   
  Added 
asr903rsp1-rpios-universalk9_npe.BLD_V152_4_S_XE37_THROTTLE_LATEST_20120810_070021.pkg
 
   
  Added asr903rsp1-sipbase.BLD_V152_4_S_XE37_THROTTLE_LATEST_20120810_070021.pkg
 
   
  Added asr903rsp1-sipspa.BLD_V152_4_S_XE37_THROTTLE_LATEST_20120810_070021.pkg
 
   
Finished list of software package changes
 
   
 
   
 
   
--- Starting commit of software changes ---
 
   
Updating provisioning rollback files
 
   
Creating pending provisioning file
 
   
Committing provisioning file
 
   
Finished commit of software changes
 
   
 
   
 
   
SUCCESS: Software provisioned.  New software will load on reboot.
 
   
 
   
STAGE 2: Restarting standby RP
==============================
--- Starting standby reload ---
Finished standby reload
 
   
--- Starting wait for Standby RP to reach terminal redundancy state ---
 
   
Finished wait for Standby RP to reach terminal redundancy state
 
   
 
   
STAGE 3: Installing sipspa package on local RP
==============================================
--- Starting local lock acquisition on R0 ---
Finished local lock acquisition on R0
 
   
--- Starting installation state synchronization ---
Finished installation state synchronization
 
   
--- Starting file path checking ---
Finished file path checking
 
   
--- Starting image file verification ---
Checking image file names
Locating image files and validating name syntax
  Found asr903rsp1-sipspa.BLD_V152_4_S_XE37_THROTTLE_LATEST_20120810_070021.pkg
Verifying image file locations
Inspecting image file types
Processing image file constraints
Creating candidate provisioning file
Finished image file verification
 
   
--- Starting candidate package set construction ---
Verifying existing software set
Processing candidate provisioning file
Constructing working set for candidate package set
Constructing working set for running package set
Checking command output
Constructing merge of running and candidate packages
Checking if resulting candidate package set would be complete
Finished candidate package set construction
 
   
--- Starting compatibility testing ---
Determining whether candidate package set is compatible
 
   
WARNING:
WARNING: Candidate software combination not found in compatibility database
WARNING:
 
   
 
   
Determining whether installation is valid
 
   
WARNING:
WARNING: Candidate software combination not found in compatibility database
WARNING:
 
   
 
   
WARNING:
WARNING: Candidate software combination not found in compatibility database
WARNING:
 
   
Software sets are identified as compatible
Verifying image type compatibility
Checking IPC compatibility with running software
Checking candidate package set infrastructure compatibility
Checking infrastructure compatibility with running software
Checking package specific compatibility
Finished compatibility testing
 
   
--- Starting impact testing ---
Checking operational impact of change
Finished impact testing
 
   
--- Starting list of software package changes ---
Old files list:
  Removed asr903rsp1-sipspa.2012-08-12_15.26_amprajap.pkg
New files list:
  Added asr903rsp1-sipspa.BLD_V152_4_S_XE37_THROTTLE_LATEST_20120810_070021.pkg
Finished list of software package changes
 
   
--- Starting commit of software changes ---
Updating provisioning rollback files
Creating pending provisioning file
Committing provisioning file
Finished commit of software changes
 
   
--- Starting analysis of software changes ---
Finished analysis of software changes
 
   
--- Starting update running software ---
Blocking peer synchronization of operating information
Creating the command set placeholder directory
  Finding latest command set
  Finding latest command shortlist lookup file
  Finding latest command shortlist file
  Assembling CLI output libraries
  Assembling CLI input libraries
  Assembling Dynamic configuration files
  Applying interim IPC and database definitions
  Replacing running software
  Replacing CLI software
  Restarting software
  Restarting IM: 0/0
Skipping IM reload for Ethernet IM
  Restarting IM: 0/1
Skipping IM reload for Ethernet IM
  Restarting IM: 0/2
Skipping IM reload for Ethernet IM
  Restarting IM: 0/3
Skipping IM reload for Ethernet IM
  Restarting IM: 0/4
Skipping IM reload for Ethernet IM
  Applying final IPC and database definitions
  Generating software version information
  Notifying running software of updates
  Unblocking peer synchronization of operating information
Unmounting old packages
Cleaning temporary installation files
  Finished update running software
  
SUCCESS: Finished installing software.
 
   
STAGE 4: Installing software on active RP
=========================================
--- Starting local lock acquisition on R0 ---
Finished local lock acquisition on R0
 
   
--- Starting installation state synchronization ---
Finished installation state synchronization
 
   
--- Starting file path checking ---
Finished file path checking
 
   
--- Starting image file verification ---
Checking image file names
Locating image files and validating name syntax
  Found asr903rsp1-espbase.BLD_V152_4_S_XE37_THROTTLE_LATEST_20120810_070021.pkg
  Found asr903rsp1-rpaccess.BLD_V152_4_S_XE37_THROTTLE_LATEST_20120810_070021.pkg
  Found asr903rsp1-rpbase.BLD_V152_4_S_XE37_THROTTLE_LATEST_20120810_070021.pkg
  Found asr903rsp1-rpcontrol.BLD_V152_4_S_XE37_THROTTLE_LATEST_20120810_070021.pkg
  Found 
asr903rsp1-rpios-universalk9_npe.BLD_V152_4_S_XE37_THROTTLE_LATEST_20120810_070021.pkg
  Found asr903rsp1-sipbase.BLD_V152_4_S_XE37_THROTTLE_LATEST_20120810_070021.pkg
  Found asr903rsp1-sipspa.BLD_V152_4_S_XE37_THROTTLE_LATEST_20120810_070021.pkg
Verifying image file locations
Inspecting image file types
    WARNING: In-service installation of IOSD package
    WARNING: requires software redundancy on target RP
    WARNING: or on-reboot parameter
    WARNING: Automatically setting the on-reboot flag
    WARNING: In-service installation of RP Base package
    WARNING: requires software reboot of target RP
Processing image file constraints
Creating candidate provisioning file
Finished image file verification
 
   
--- Starting candidate package set construction ---
Verifying existing software set
Processing candidate provisioning file
Constructing working set for candidate package set
Constructing working set for running package set
Checking command output
Constructing merge of running and candidate packages
Checking if resulting candidate package set would be complete
Finished candidate package set construction
 
   
--- Starting compatibility testing ---
Determining whether candidate package set is compatible
Determining whether installation is valid
Determining whether installation is valid ... skipped
Verifying image type compatibility
Checking IPC compatibility for candidate software
Checking candidate package set infrastructure compatibility
Checking infrastructure compatibility with running software
Checking infrastructure compatibility with running software ... skipped
Checking package specific compatibility
Finished compatibility testing
 
   
--- Starting list of software package changes ---
Old files list:
  Removed asr903rsp1-espbase.2012-08-12_15.26_amprajap.pkg
  Removed asr903rsp1-rpaccess.2012-08-12_15.26_amprajap.pkg
  Removed asr903rsp1-rpbase.2012-08-12_15.26_amprajap.pkg
  Removed asr903rsp1-rpcontrol.2012-08-12_15.26_amprajap.pkg
  Removed asr903rsp1-rpios-universalk9_npe.2012-08-12_15.26_amprajap.pkg
  Removed asr903rsp1-sipbase.2012-08-12_15.26_amprajap.pkg
New files list:
  Added asr903rsp1-espbase.BLD_V152_4_S_XE37_THROTTLE_LATEST_20120810_070021.pkg
  Added asr903rsp1-rpaccess.BLD_V152_4_S_XE37_THROTTLE_LATEST_20120810_070021.pkg
  Added asr903rsp1-rpbase.BLD_V152_4_S_XE37_THROTTLE_LATEST_20120810_070021.pkg
  Added asr903rsp1-rpcontrol.BLD_V152_4_S_XE37_THROTTLE_LATEST_20120810_070021.pkg
  Added 
asr903rsp1-rpios-universalk9_npe.BLD_V152_4_S_XE37_THROTTLE_LATEST_20120810_070021.pkg
  Added asr903rsp1-sipbase.BLD_V152_4_S_XE37_THROTTLE_LATEST_20120810_070021.pkg
Finished list of software package changes
 
   
--- Starting commit of software changes ---
Updating provisioning rollback files
Creating pending provisioning file
Committing provisioning file
Finished commit of software changes
 
   
SUCCESS: Software provisioned.  New software will load on reboot.
 
   
STAGE 5: Restarting active RP (switchover to stdby)
===================================================
--- Starting active reload ---
Finished active reload
 
   
SUCCESS: node ISSU finished successfully.
RUDY-1#
RUDY-1#Aug 24 07:54:41.715 R0/0: %PMAN-5-EXITACTION: Process manager is exiting: reload 
fru action requested
 
   
System Bootstrap, Version 15.3(1r)S1, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 2012 by cisco Systems, Inc.
Compiled Tue 26-Jun-12 12:42 by ccai
 
   
Current image running: Boot ROM0UEA platform with 3670016 Kbytes of main memory
 
   
Located packages.conf
Image size 7519 inode num 38, bks cnt 2 blk size 8*512
#
Located asr903rsp1-rpbase.BLD_V152_4_S_XE37_THROTTLE_LATEST_20120810_070021.pkg
Image size 34216240 inode num 90631, bks cnt 8354 blk size 8*512
##########################################################################################
##########################################################################################
##########################################################################################
#################################################################
Boot image size = 34216240 (0x20a1930) bytes
 
   
Package header rev 0 structure detected
Calculating SHA-1 hash...done
validate_package: SHA-1 hash:
        calculated e7674970:dbc1eb86:325219c7:b3da0e0f:077e5e4d
        expected   e7674970:dbc1eb86:325219c7:b3da0e0f:077e5e4d
Image validated
%IOSXEBOOT-4-BOOT_ACTIVITY_LONG_TIME: (rp/0): load_crash_kernel took: 2 seconds, expected 
max time 2 seconds
%IOSXEBOOT-4-DEBUG_CONF: (rp/0): File /bootflash/debug.conf is absent, ignoring
%IOSXEBOOT-4-BOOT_ACTIVITY_LONG_TIME: (rp/0): Chasfs initialisation took: 26 seconds, 
expected max time 10 seconds
%IOSXEBOOT-4-BOOT_ACTIVITY_LONG_TIME: (rp/0): upgrade hw-programmable took: 2 seconds, 
expected max time 2 seconds
 
   
              Restricted Rights Legend
 
   
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
 
   
           cisco Systems, Inc.
           170 West Tasman Drive
           San Jose, California 95134-1706
 
   
 
   
 
   
Cisco IOS Software, IOS-XE Software (PPC_LINUX_IOSD-UNIVERSALK9_NPE-M), Experimental 
Version 15.2(20120810:081250) 
[v152_4_s_xe37_throttle-BLD-BLD_V152_4_S_XE37_THROTTLE_LATEST_20120810_070021-ios 131]
Copyright (c) 1986-2012 by Cisco Systems, Inc.
Compiled Fri 10-Aug-12 03:50 by mcpre
 
   
 
   
 
   
 
   
Cisco IOS-XE software, Copyright (c) 2005-2012 by cisco Systems, Inc.
All rights reserved.  Certain components of Cisco IOS-XE software are
licensed under the GNU General Public License ("GPL") Version 2.0.  The
software code licensed under GPL Version 2.0 is free software that comes
with ABSOLUTELY NO WARRANTY.  You can redistribute and/or modify such
GPL code under the terms of GPL Version 2.0.  For more details, see the
documentation or "License Notice" file accompanying the IOS-XE software,
or the applicable URL provided on the flyer accompanying the IOS-XE
software.
 
   
 
   
 
   
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
 
   
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
 
   
If you require further assistance please contact us by sending email to
export@cisco.com.
 
   
cisco ASR-903 (RSP1) processor with 540359K/6147K bytes of memory.
Processor board ID FOX1518P0GP
32768K bytes of non-volatile configuration memory.
3670016K bytes of physical memory.
1328927K bytes of SD flash at bootflash:.
 
   
 
   
 
   
Press RETURN to get started!