Cisco Aironet 2.4-GHz Dipole Antenna (AIR-ANT2422DG-R)

Available Languages

Download Options

  • PDF     (242.3 KB)
    View with Adobe Reader on a variety of devices
Updated:December 6, 2007

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Table of Contents

Cisco Aironet 2.4-GHz Dipole Antenna (AIR-ANT2422DG-R)

Overview

Technical Specifications

System Requirements

Obtaining Documentation and Submitting a Service Request

Cisco Aironet 2.4-GHz Dipole Antenna (AIR-ANT2422DG-R)

Overview

This document outlines the specifications and description of the 2.2-dBi dipole antenna. This antenna operates in the 2.4 to 2.5-GHz band and is designed for use with Cisco Aironet radio products using an RP-TNC connector.

Note This antenna is fixed. It does not have an articulating feature.

The following information is provided in this document:

Technical Specifications

 

Antenna type

Dipole

 

Operating frequency range

2402-2495 MHz

Nominal input impedance

50 Ohms

2:l VSWR bandwidth

2385 - 2515 Mhz

Peak gain

2 dBi

Polarization

Linear, vertical

E-Plane 3-dB beamwidth

70o

H-Plane 3-dB beamwidth

Omnidirectional

Dimensions

5.5 in. (13 cm)

Weight

1 oz.

Connector type

RP-TNC plug

Environment

Indoor

Operating temperature range

32oF to 140oF
(0oC to 60oC)

 

E-Plane Pattern
H-Plane Pattern

 

 

System Requirements

This antenna is compatible with any 2.4-GHz Cisco Aironet device with an RP-TNC plug.

Obtaining Documentation and Submitting a Service Request

For information on obtaining documentation, using the Cisco Bug Search Tool (BST), submitting a service request, and gathering additional information, see What’s New in Cisco Product Documentation at: http://www.cisco.com/c/en/us/td/docs/general/whatsnew/whatsnew.html.

Subscribe to What’s New in Cisco Product Documentation, which lists all new and revised Cisco technical documentation as an RSS feed and delivers content directly to your desktop using a reader application. The RSS feeds are a free service.

Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1110R)

Any Internet Protocol (IP) addresses and phone numbers used in this document are not intended to be actual addresses and phone numbers. Any examples, command display output, network topology diagrams, and other figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses or phone numbers in illustrative content is unintentional and coincidental.

Copyright © 2006 Cisco Systems, Inc. All rights reserved.

Was this Document Helpful?

FeedbackFeedback

Contact Cisco

This Document Applies to These Products