Cisco Aironet 1130AG Series Access Point Hardware Installation Guide, OL-8369-01
Access Point Specifications
Downloads: This chapterpdf (PDF - 337.0KB) The complete bookPDF (PDF - 2.43MB) | Feedback

Access Point Specifications

Table Of Contents

Access Point Specifications


Access Point Specifications


Table C-1 lists the technical specifications for the 1130AG series access point.

Table C-1 Access Point Specifications 

Category
802.11g Radio Specifications
802.11a Radio Specifications
802.11b Operation
802.11g Operation

Size

7.53 in. W x 7.53 in. D x 1.31 in. H
19.13 cm W x 19.13 cm D x 3.33 cm H

Indicators

Tri-color Status LED indicator on the top panel and two bi-color LED indicators (radio and Ethernet) in the cable bay

Connectors

Cable bay (left to right)

Power connector (for plug-in AC power module); RJ-45 connector for 10BASE-T or 100BASE-T Ethernet connections; upside down RJ-45 connector for serial connections.

Input Voltage

48 VDC (nominal)

Input Power

12.95 W (typical)

Operating Temperature

Base unit:

32 to 104oF (0 to 40oC)

1130AG series power module:

32 to 104oF (0 to 40oC)

Weight

Without mounting hardware:

1.48 lbs (0.67 kg)

Power Output

100 mW (20 dBm)
50 mW (17 dBm)
25 mW (14 dBm)
10 mW (11 dBm)
5 mW (8 dBm)
3 mW (5 dBm)
2 mW (2 dBm)
1 mW (-1 dBm)

(Depending on the regulatory domain in which the access point is installed)

50 mW (17 dBm)
25 mW (14 dBm)
10 mW (11 dBm)
5 mW (8 dBm)
3 mW (5 dBm)
2 mW (2 dBm)
1 mW (-1 dBm)

(Depending on the regulatory domain in which the access point is installed)

Autonomous access points

50 mW (17 dBm)
30 mW (15 dBm)
25 mW (14 dBm)
10 mW (11 dBm)
5 mW (8 dBm)
3 mW (5 dBm)
2 mW (2 dBm)
1 mW (-1 dBm)

Lightweight access points

50 mW (17 dBm)
25 mW (14 dBm)
10 mW (11 dBm)
5 mW (8 dBm)
3 mW (5 dBm)
2 mW (2 dBm)
1 mW (-1 dBm)

(Depending on the regulatory domain in which the access point is installed)

Antenna

A diversity system with two integrated 3-dBi antennas.

A diversity system with two integrated 4.5-dBi antennas.

Frequency

2.400 to 2.497 GHz
(Depending on the regulatory domain in which the access point is installed)

5.15 to 5.25 GHz
5.25 to 5.35 GHz
5.725 to 5.85 GHz

(Depending on the regulatory domain in which the access point is installed)

Modulation

Complementary Code Keying (CCK)

Orthogonal Frequency Division Multiplex (OFDM)

Subcarrier modulation

BPSK (1 Mbps)
QPSK (2 Mbps)
CCK (5.5 and 11 Mbps)

BPSK (6 and 9 Mbps)
QPSK (12 and 18 Mbps)
16-QAM (24 and 36 Mbps)
64-QAM (48 and 54 Mbps)

BPSK (6 Mbps and 9 Mbps)
QPSK (12 Mbps and 18 Mbps)
16-QAM (24 and 36 Mbps)
64-QAM (48 and 54 Mbps)

Data rates

1, 2, 5.5, and 11 Mbps

6, 9, 12, 18, 24, 36, 48, and 54 Mbps

Typical indoor range

450 ft at 1 Mbps
360 ft at 11 Mbps

400 ft at 6 Mbps
100 ft at 54 Mbps

325 ft at 6 Mbps
80 ft at 54 Mbps

Compliance

The 1130AG series access point complies with UL 2043 for products installed in a building's environmental air handling spaces, such as above suspended ceilings.


Caution Only the fiber-optic power injector (AIR-PWRINJ-FIB) has been tested to UL 2043 for operation in a building's environmental air space; no other power injectors or power modules have been tested to UL 2043 and they should not be placed in a building's environmental air space, such as above suspended ceilings.

Safety

Designed to meet:

UL 60950-1
CAN/CSA C22.2 No. 60950-1
UL 2043
EN 60950-1
IEC 60950-1

Radio Approvals

FCC Parts 15.247
Canada RSS-210
Japan ARIB-STD-33B
Japan ARIB-STD-66
Europe EN-300.328

FCC Part 15.407
Canada RSS-210
Japan ARIB STD-T71
EN 301.893

EMI and Susceptibility

FCC Part 15.107 and 15.109 Class B
ICES-003 Class B (Canada)
EN 55022 B
EN 60601-1-2:2001
AS/NZS 3548 Class B
VCCI Class B
EN 301.489-1
EN 301.489-17

RF Exposure

OET-65C
RSS-102
ANSI C95.1