The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
A
access point
discovery 1-1
guidlines 1-2
types 1-4
administrative rules, Taiwan B-9
antennas
external 1-5
integrated C-2
anti-theft feature 1-6
C
Canadian compliance B-4
ceiling-mount clips 2-11
ceiling mounting process 2-10
configuring DHCP Option 43 F-2
conformity statement B-2
connectors C-1
left side 1-3
right side 1-4
controller 1-1
controller discovery process 2-6
D
data rates C-2
declarations of conformity B-1
deployment
access points 2-7
process 2-7
DHCP pool F-2
discovery process
DHCP server 2-7
DNS server 2-7
Layer 2 2-6
locally stored 2-6
Over-the-air wireless (OTW) 2-6
dual radio 1-4
E
EMI and susceptibility standards C-3
Ethernet
connector 2-18
port 1-5
extended temperature range 2-3, 2-4
F
FCC Declaration of Conformity B-2
frequency range C-2
G
guidlines
installation 2-3
operating in Japan B-8
using access points 3-2
H
hardware features 1-2
I
inline power 2-18
input power C-1
input voltage C-1
installation guidelines 2-3
K
key features 1-2
keyhole slots 1-6
L
Layer 2 operation 1-8
LED indicators
markings 1-5
power up sequence 2-19
signals 3-4
lightweight access points 1-1
low power condition 3-5
LWAPP 1-1
M
MAC information 2-20
modulation C-1
mounting
ceiling 2-10
flush-mount bracket 2-15
projection-mount bracket 2-14
suspended ceiling clips 2-11
vertical wall 2-13
mounting options 2-8
O
operating temperature C-1
P
package contents 2-3
power
cabling 2-17
connector 2-18
input C-1
options 2-17
output C-2
sources 1-5
power injector 2-17
power module 2-17
priming access points E-1
process, controller discovery 2-6
R
radio
approvals C-2
integrated 1-1
range C-2
regulatory
information B-1
RF exposure B-7
RF exposure standards C-3
S
Safety Compliance, FCC 2-2
safety standards C-2
safety warnings, translated A-1
securing the access point 2-17
size C-1
specifications C-1
T
temperature
operating C-1
storage C-1
troubleshooting 3-1
type-length-value (TLV) F-2
U
unpacking 2-3
V
Vendor Class Identifier (VCI) F-2
vendor class identifier (VCI) F-2
W
weight C-1
Wireless Domain Services (WDS) 1-2