Release Notes for Cisco Unity 4.1(1) Plug-in, Release 2.0 (for Cisco Voice Provisioning Tool)
Available Languages
Table Of Contents
Release Notes for Cisco Unity 4.1(1) Plug-in, Release 2.0 (for Cisco Voice Provisioning Tool)
Determining the Software Version
Cisco Product Security Overview
Reporting Security Problems in Cisco Products
Product Alerts and Field Notices
Obtaining Technical Assistance
Definitions of Service Request Severity
Obtaining Additional Publications and Information
Release Notes for Cisco Unity 4.1(1) Plug-in, Release 2.0 (for Cisco Voice Provisioning Tool)
Published January 8, 2007
These release notes describe system requirements, installation notes, caveats, documentation notes, and technical assistance information for release 2.0 of the Cisco Unity 4.1(1) Plug-in for the Cisco Voice Provisioning Tool.
Contents
These release notes contain the following sections:
•
Cisco Product Security Overview
•
•
•
Introduction
The Cisco Voice Provisioning Tool (VPT), a web-based application, provides you a single interface from which to perform frequent move, add, and change operations on multiple servers within a Cisco IP Telephony deployment. The Cisco Unity 4.1(1) plug-in for VPT allows you to use VPT to perform user provisioning tasks on Cisco Unity 4.1(1) systems.
System Requirements
The following subsections describe the hardware and software requirements for the Cisco Unity 4.1(1) plug-in.
Hardware Supported
The plug-in is installed on the VPT server. For a list of hardware supported on the VPT server, see the Cisco Voice Provisioning Tool Release Notes at http://www.cisco.com/en/US/products/ps6524/prod_release_notes_list.html.
Software Compatibility
The 2.0 release of the Cisco Unity 4.1(1) plug-in can be installed on a server running Cisco Voice Provisioning Tool release 1.0(2). It can be installed concurrently with Cisco Unified CallManager plug-ins, the Cisco Unity Connection plug-in, and other Cisco Unity plug-ins.
The following requirements must be met on the Cisco Unity server to interoperate with the Cisco Unity 4.1(1) plug-in:
•
•
Determining the Software Version
To determine the version of Cisco Voice Provisioning Tool software in use, browse to the VPT login window and click About in the upper right corner of the window. You can also access the About link from any window after you have logged in to the tool.
To determine the version of product plug-ins installed on a VPT server, open the VPT graphical user interface (GUI) as described in the Cisco Voice Provisioning Tool System Management and Security Guide, and choose VPT Administration > Plug-Ins > Manage Plug-Ins.
Installation Notes
To Install or Upgrade the Cisco Unity 4.1(1) Plug-in
To install or upgrade a plug-in, your administrator account must belong to a role that has Plugin Management Install permissions for the VPT application.
Step 1
The Cisco Voice Provisioning Tool software page displays.
Tip
Step 2
For example, click unity_4_1_1_v2_0.zip.
Step 3
Step 4
Step 5
Step 6
Caveats
This section contains information on the following topics:
This section contains caveat information for the Cisco Unity 4.1(1) plug-in for the Cisco Voice Provisioning Tool only. See the release notes of the applicable version for caveat information for the Cisco Voice Provisioning Tool or Cisco Unity.
•
•
Using Bug Toolkit
To access Bug Toolkit, you need the following items:
•
•
•
Tip
To Use Bug Toolkit
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
•
–
A major release contains significant new features, enhancements, architectural changes, and/or defect fixes.
–
A revision (maintenance) release primarily contains defect fixes to address specific problems, but it may also include new features and/or enhancements.
•
–
–
–
–
–
–
•
Note
•
–
–
–
Step 8
The Bug Toolkit returns a list of caveats based on your query. You can modify your results by submitting another query and choosing different criteria. You can also save your query for future use, as described in the "Saving Bug Toolkit Queries" section.
Saving Bug Toolkit Queries
Bug Toolkit allows you to create and then save your queries to monitor a specific defect or network situation. You can edit a saved search at any time to change the alert conditions, the defects being watched, or the network profile.
To save your Bug Toolkit queries, do the following procedure.
To Save Bug Toolkit Queries
Step 1
Step 2
Step 3
Step 4
•
•
This bug group contains the bugs that are identified by using the search criteria that you saved. Each time that a new bug meets the search criteria, the system adds it to the group that you chose.
Bug Toolkit makes your queries available through the My Stuff window, which allows you to view, create, and/or modify existing bug groups or saved searches. Choose the My Stuff link to see a list of your bug groups.
Step 5
•
•
–
–
•
Step 6
A window displays the bug group(s) that you have saved. From this window, you can click a bug group name to see the bugs and the saved searches; you can also edit the search criteria.
Open Caveats—Release 2.0
There were no open caveats specific to the Cisco Unity 4.1(1) plug-in at the time the plug-in released. For an updated view of open defects, access Bug Toolkit and follow the instructions as described in the "To Use Bug Toolkit" procedure.
Resolved Caveats—Release 2.0
Table 1 describes defects that were resolved in Release 2.0 of the Cisco Unity 4.1(1) plug-in for VPT. (Caveats are listed in order by component, then by caveat number.)
Note
Because defect status continually changes, be aware that the list in reflects a snapshot of the defects that were resolved at the time this report was compiled. For an updated view of resolved defects, access Bug Toolkit and follow the instructions as described in the "To Use Bug Toolkit" procedure.
Documentation Updates
The documentation for Cisco Voice Provisioning Tool release 1.0(1) covers the use of VPT with the Cisco Unified CallManager 4.1(3) and Cisco Unity 4.0(5) plug-ins. With the exception of the fact that the Cisco Unity 4.1(1) plug-in is not installed by default as part of the VPT installation, all statements in the Cisco Voice Provisioning Tool documentation that apply to the Cisco Unity 4.0(5) plug-in also apply to the Cisco Unity 4.1(1) plug-in release 2.0.
Related Documentation
See the following documents for more information on the Cisco Voice Provisioning Tool and Cisco Unity:
•
This guide lists and describes the documents that make up the Cisco Voice Provisioning Tool documentation set. The guide is available at http://www.cisco.com/en/US/products/ps6524/products_documentation_roadmaps_list.html.
•
This guide describes how to install and upgrade the Cisco Voice Provisioning Tool. The guide is available at http://www.cisco.com/en/US/products/ps6524/prod_installation_guides_list.html.
•
This guide provides descriptions of the Cisco Voice Provisioning Tool and its components, as well as step-by-step instructions for configuring and managing the tool itself. The guide is available at http://www.cisco.com/en/US/products/ps6524/prod_maintenance_guides_list.html.
•
This guide provides information on provisioning users, phones, and device profiles for Cisco Unified CallManager and Cisco Unity. The guide is available at http://www.cisco.com/en/US/products/ps6524/prod_maintenance_guides_list.html.
•
This document provides a list of Cisco Unity documents that are available with the 4.1(1) release. The document also provides URLs so that you can locate the documents on the web. This documentation guide is available at http://www.cisco.com/en/US/products/sw/voicesw/ps2237/products_documentation_roadmaps_list.html.
Obtaining Documentation
Cisco documentation and additional literature are available on Cisco.com. This section explains the product documentation resources that Cisco offers.
Cisco.com
You can access the most current Cisco documentation at this URL:
http://www.cisco.com/techsupport
You can access the Cisco website at this URL:
You can access international Cisco websites at this URL:
http://www.cisco.com/public/countries_languages.shtml
Product Documentation DVD
The Product Documentation DVD is a library of technical product documentation on a portable medium. The DVD enables you to access installation, configuration, and command guides for Cisco hardware and software products. With the DVD, you have access to the HTML documentation and some of the PDF files found on the Cisco website at this URL:
http://www.cisco.com/univercd/home/home.htm
The Product Documentation DVD is created and released regularly. DVDs are available singly or by subscription. Registered Cisco.com users can order a Product Documentation DVD (product number DOC-DOCDVD= or DOC-DOCDVD=SUB) from Cisco Marketplace at the Product Documentation Store at this URL:
http://www.cisco.com/go/marketplace/docstore
Ordering Documentation
You must be a registered Cisco.com user to access Cisco Marketplace. Registered users may order Cisco documentation at the Product Documentation Store at this URL:
http://www.cisco.com/go/marketplace/docstore
If you do not have a user ID or password, you can register at this URL:
http://tools.cisco.com/RPF/register/register.do
Documentation Feedback
You can provide feedback about Cisco technical documentation on the Cisco Support site area by entering your comments in the feedback form available in every online document.
Cisco Product Security Overview
Cisco provides a free online Security Vulnerability Policy portal at this URL:
http://www.cisco.com/en/US/products/products_security_vulnerability_policy.html
From this site, you will find information about how to do the following:
•
•
•
A current list of security advisories, security notices, and security responses for Cisco products is available at this URL:
To see security advisories, security notices, and security responses as they are updated in real time, you can subscribe to the Product Security Incident Response Team Really Simple Syndication (PSIRT RSS) feed. Information about how to subscribe to the PSIRT RSS feed is found at this URL:
http://www.cisco.com/en/US/products/products_psirt_rss_feed.html
Reporting Security Problems in Cisco Products
Cisco is committed to delivering secure products. We test our products internally before we release them, and we strive to correct all vulnerabilities quickly. If you think that you have identified a vulnerability in a Cisco product, contact PSIRT:
•
An emergency is either a condition in which a system is under active attack or a condition for which a severe and urgent security vulnerability should be reported. All other conditions are considered nonemergencies.
•
In an emergency, you can also reach PSIRT by telephone:
•
•
Tip
Never use a revoked encryption key or an expired encryption key. The correct public key to use in your correspondence with PSIRT is the one linked in the Contact Summary section of the Security Vulnerability Policy page at this URL:
http://www.cisco.com/en/US/products/products_security_vulnerability_policy.html
The link on this page has the current PGP key ID in use.
If you do not have or use PGP, contact PSIRT to find other means of encrypting the data before sending any sensitive material.
Product Alerts and Field Notices
Modifications to or updates about Cisco products are announced in Cisco Product Alerts and Cisco Field Notices. You can receive these announcements by using the Product Alert Tool on Cisco.com. This tool enables you to create a profile and choose those products for which you want to receive information.
To access the Product Alert Tool, you must be a registered Cisco.com user. Registered users can access the tool at this URL:
http://tools.cisco.com/Support/PAT/do/ViewMyProfiles.do?local=en
To register as a Cisco.com user, go to this URL:
http://tools.cisco.com/RPF/register/register.do
Obtaining Technical Assistance
Cisco Technical Support provides 24-hour-a-day award-winning technical assistance. The Cisco Support website on Cisco.com features extensive online support resources. In addition, if you have a valid Cisco service contract, Cisco Technical Assistance Center (TAC) engineers provide telephone support. If you do not have a valid Cisco service contract, contact your reseller.
Cisco Support Website
The Cisco Support website provides online documents and tools for troubleshooting and resolving technical issues with Cisco products and technologies. The website is available 24 hours a day at this URL:
http://www.cisco.com/en/US/support/index.html
Access to all tools on the Cisco Support website requires a Cisco.com user ID and password. If you have a valid service contract but do not have a user ID or password, you can register at this URL:
http://tools.cisco.com/RPF/register/register.do
Note
Tip
If you suspect that the browser is not refreshing a web page, force the browser to update the web page by holding down the Ctrl key while pressing F5.
To find technical information, narrow your search to look in technical documentation, not the entire Cisco.com website. After using the Search box on the Cisco.com home page, click the Advanced Search link next to the Search box on the resulting page and then click the Technical Support & Documentation radio button.
To provide feedback about the Cisco.com website or a particular technical document, click Contacts & Feedback at the top of any Cisco.com web page.
Submitting a Service Request
Using the online TAC Service Request Tool is the fastest way to open S3 and S4 service requests. (S3 and S4 service requests are those in which your network is minimally impaired or for which you require product information.) After you describe your situation, the TAC Service Request Tool provides recommended solutions. If your issue is not resolved using the recommended resources, your service request is assigned to a Cisco engineer. The TAC Service Request Tool is located at this URL:
http://www.cisco.com/techsupport/servicerequest
For S1 or S2 service requests, or if you do not have Internet access, contact the Cisco TAC by telephone. (S1 or S2 service requests are those in which your production network is down or severely degraded.) Cisco engineers are assigned immediately to S1 and S2 service requests to help keep your business operations running smoothly.
To open a service request by telephone, use one of the following numbers:
Asia-Pacific: +61 2 8446 7411
Australia: 1 800 805 227
EMEA: +32 2 704 55 55
USA: 1 800 553 2447For a complete list of Cisco TAC contacts, go to this URL:
http://www.cisco.com/techsupport/contacts
Definitions of Service Request Severity
To ensure that all service requests are reported in a standard format, Cisco has established severity definitions.
Severity 1 (S1)—An existing network is "down" or there is a critical impact to your business operations. You and Cisco will commit all necessary resources around the clock to resolve the situation.
Severity 2 (S2)—Operation of an existing network is severely degraded, or significant aspects of your business operations are negatively affected by inadequate performance of Cisco products. You and Cisco will commit full-time resources during normal business hours to resolve the situation.
Severity 3 (S3)—Operational performance of the network is impaired while most business operations remain functional. You and Cisco will commit resources during normal business hours to restore service to satisfactory levels.
Severity 4 (S4)—You require information or assistance with Cisco product capabilities, installation, or configuration. There is little or no effect on your business operations.
Obtaining Additional Publications and Information
Information about Cisco products, technologies, and network solutions is available from various online and printed sources.
•
http://www.cisco.com/offer/subscribe
•
•
http://www.cisco.com/go/marketplace/
•
•
•
http://www.cisco.com/en/US/products/index.html
•
http://www.cisco.com/discuss/networking
•
http://www.cisco.com/univercd/cc/td/doc/abtunicd/136957.htm
•
http://www.cisco.com/en/US/learning/index.html
This document is to be used in conjunction with the documents listed in the "Related Documentation" section.
© 2007 Cisco Systems, Inc. All rights reserved.
Feedback