VG248 Software Configuration Guide v1.3
About this Guide
Downloads: This chapterpdf (PDF - 160.0KB) The complete bookPDF (PDF - 2.07MB) | Feedback

About this Guide

Table Of Contents

About this Guide

Overview

Audience

Objectives

Organization

Related Documentation

Obtaining Documentation and Submitting a Service Request


About this Guide


Overview

The Cisco VG248 Analog Phone Gateway Software Configuration Guide 1.3(1) provides the information you need to configure and manage the Cisco VG248 Analog Phone Gateway (VG248) on your network.

Audience

Network engineers, system administrators, and telecom engineers should review this guide for information about configuring and using the VG248 in the network.

The tasks described in this guide are considered to be administration-level tasks. Because of the close interaction of the VG248 with Cisco CallManager and analog telephony systems, these tasks require that you are familiar with these systems as well.

Objectives

This guide provides the required steps to configure and manage the VG248. You must use this guide in conjunction with the Cisco VG248 Analog Phone Gateway Hardware Installation Guide to get the VG248 up and running on your network.

Because of the complexity of an IP telephony network, this guide does not provide detailed information for required procedures performed on other Cisco or third-party devices. Refer to the documentation provided with these systems for installation and configuration instructions.

Organization

Table 1 provides an overview of the organization of this guide.

Table 1 Cisco VG248 Analog Phone Gateway Software Configuration Guide Organization 

Chapter
Description

Chapter 1, "Overview"

Provides an overview of software features and how they are implemented on the VG248.

Chapter 2, "Getting Started with the VG248"

Describes the basic network settings you need to configure on the VG248.

Chapter 3, "Configuring the Telephony Settings on the VG248"

Includes the procedures for configuring the telephony settings on the VG248.

Chapter 4, "Configuring Voice Mail Settings"

Provides an overview of voice mail support, configuration options, instructions for configuring, and troubleshooting tips.

Chapter 5, "Configuring VG248 Ports Using Cisco CallManager"

Describes necessary steps in Cisco CallManager for adding and configuring the VG248 ports.

Chapter 6, "Troubleshooting the VG248"

Provides troubleshooting tips for the VG248.


Related Documentation

For information about Cisco CallManager and additional information about the VG248, refer to these publications:

Cisco VG248 Analog Phone Gateway Hardware Installation Guide

Cisco VG248 Analog Phone Gateway Release Notes 1.3(1)

Cisco CallManager Administration Guide

Obtaining Documentation and Submitting a Service Request

For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What's New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:

http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html

Subscribe to the What's New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service and Cisco currently supports RSS Version 2.0.