Table Of Contents
fallback-url (Cisco Unified Communications Manager Express Only)
F
Last Updated: June 30, 2007
fallback-url (Cisco Unified Communications Manager Express Only)
fallback-url (Cisco Unified Communications Manager Express Only)
To configure a fallback authentication server, use the fallback-url command in Cisco Unity Express phone authentication mode. To delete the fallback server URL, use the no form of this command.
fallback-url server-url
no fallback-url
Syntax Description
Defaults
No server is configured.
Command Modes
Cisco Unity Express phone authentication
Command History
Cisco Unity Express Release Modification2.3
This command was introduced.
3.0
This command was implemented on the advanced integration module (AIM).
Usage Guidelines
This command is not available on an NM running Cisco Unified Communications Manager or on an AIM for release 2.3 and earlier.
Configuring the fallback authentication server is necessary for Cisco Unified Communications Manager Express (Cisco Unified CME) systems.
Cisco Unity Express provides a primary authentication server for VoiceView Express authentication requests from Cisco Unified CME. If Cisco Unified CME is configured with several phone services that need authentication services, Cisco Unity Express directs those authentication requests to the fallback server.
The Cisco Unified CME administrator must ensure that Cisco Unified CME authentication server URL points to Cisco Unity Express authentication server. The URL format is http://Cisco-Unity-Express-hostname/voiceview/authentication/authenticate.do.
The Cisco Unity Express administrator must configure the Cisco Unity Express fallback authentication URL to point to the third-party fallback server. This URL has the format http://servername/path/filename.
Examples
The following example configures a fallback authentication server URL for Cisco Unity Express:
se-10-0-0-0# config tse-10-0-0-0(config)# service phone-authenticationse-10-0-0-0(config-phone-authentication)# fallback-url http://172.16.10.10/auth-server/authenticate.aspse-10-0-0-0(config-phone-authentication)# endse-10-0-0-0(config)#endse-10-0-0-0#Related Commands
Command DescriptionEnables the VoiceView Express feature.
Enters the VoiceView Express configuration mode.
Enters phone authentication mode.
Specifies the inactivity timer for VoiceView Express.
fax gateway inbound address
To configure an inbound fax gateway, use the fax gateway inbound address command in Cisco Unity Express configuration mode. Use the no form of this command to delete this configuration.
fax gateway inbound address {ip-address | hostname}
no fax gateway inbound address {ip-address | hostname}
Syntax Description
Command Default
No fax gateway IP address or DNS hostname is configured.
Command Modes
Cisco Unity Express configuration
Command History
Usage Guidelines
Use the fax gateway inbound address command in Cisco Unity Express configuration mode to specify the IP address or DNS hostname of the fax gateway that you want to use to receive faxes. The inbound fax gateway is also referred to as On-ramp. Repeating the command with a different IP address or hostname will overwrite the current configuration.
An error message appears when you enter:
•A DNS hostname without first configuring the DNS server
•An invalid IP address or DNS hostname
Examples
The following example configures the inbound fax gateway IP address:
se-10-0-0-0# config t
se-10-0-0-0(config)# fax gateway inbound address 172.16.20.50se-10-0-0-0(config)# end
Related Commands
fax gateway outbound address
To configure an outbound fax gateway, use the fax gateway outbound address command in Cisco Unity Express configuration mode. Use the no form of this command to delete this configuration.
fax gateway outbound address {ip-address | hostname}
no fax gateway outbound address {ip-address | hostname}
Syntax Description
Command Default
No fax gateway IP address or DNS hostname is configured.
Command Modes
Cisco Unity Express configuration
Command History
Usage Guidelines
Use the fax gateway outbound address command in Cisco Unity Express configuration mode to specify the IP address or DNS hostname of the fax gateway that you want to use to send faxes. The outbound fax gateway is also referred to as Off-ramp. Repeating the command with a different IP address or hostname will overwrite the current configuration.
An error message appears when you enter:
•A DNS hostname without first configuring the DNS server
•An invalid IP address or DNS hostname
Examples
The following example configures the outbound fax gateway IP address:
se-10-0-0-0# config t
se-10-0-0-0(config)# fax gateway outbound address 172.16.20.50se-10-0-0-0(config)# end
Related Commands
fax print
To configure the system-level fax number used to print faxes, use the fax print command in Cisco Unity Express configuration mode. Use the no form of this command to delete this configuration.
fax print E.164
no fax print E.164
Syntax Description
Command Default
No system-level fax number is configured.
Command Modes
Cisco Unity Express EXEC
Command History
Usage Guidelines
Use the fax print command in Cisco Unity Express configuration mode to configure the system-level fax number used to print the faxes. On successful completion of this command, the system gives users the option to print the fax on a system-configured number.
An error message appears when you enter an extension with an incorrect length. The maximum allowed is 15 characters.
Examples
The following example sets the system-level fax number to 555-0112:
se-10-0-0-0# config tse-10-0-0-0(config)# fax print 5550112
Related Commands