Guest

Cisco Unity Express

Cisco Voice Connectivity MIB

  • Viewing Options

  • PDF (316.7 KB)
  • Feedback
Cisco Voice Connectivity MIB

Table Of Contents

Cisco Voice Connectivity MIB

Contents

Prerequisites for the CISCO-VOICE-CONNECTIVITY-MIB

Information About the CISCO-VOICE-CONNECTIVITY-MIB

CISCO-VOICE-CONNECTIVITY-MIB Structure

CISCO-VOICE-CONNECTIVITY-MIB Objects

Cisco Voice Connectivity MIB Object Groups

How to Use the CISCO-VOICE-CONNECTIVITY-MIB

Locating the CISCO-VOICE-CONNECTIVITY-MIB

Enabling the SNMP Agent

Prerequisites

Verifying the Enabling of the SNMP Agent

Configuring the MIB Browser to Read MIB Values

MIB Browser Configuration

Prerequisites

Configuring the MIB Browser to Write MIB Values

MIB Browser Configuration

Prerequisites

What to Do Next

Additional References

Related Documents

Standards

MIBs

RFCs

Technical Assistance

Command Reference

Glossary


Cisco Voice Connectivity MIB


The Cisco Voice Connectivity MIB (ciscoVoiceConnectivityMIB) provides connectivity related information for devices (for example, connectivity between voice gateways, phones, gatekeepers and call processing agents). This MIB can be used by network management applications to collect the information regarding voice connectivity among the devices in the network. The CISCO-VOICE-CONNECTIVITY-MIB can also be used to retrieve the status of voice connectivity between the devices in the network.

By configuring SNMP to send notifications to one or more monitoring computers, the network management system (NMS) application can monitor a population of CUEs. Because notifications are event driven, they cause much less network traffic than using the SNMP GET operation repeatedly to poll a population of CUEs. The SNMP management interface provides observability of the system through SNMP GET operations, and sends SNMP v2c notifications to the NMS application when events occur.

Feature History of the Cisco CME MIB Feature

Release
Modification

4.1

This feature was introduced on the Cisco Unity Express Release 2.2.

Added the cvcProductCategory object to Table 1 to resolve CSCsd38122.


Finding Support Information for Platforms and Cisco IOS Software Images

Use Cisco Feature Navigator to find information about platform support and Cisco IOS software image support. Access Cisco Feature Navigator at http://www.cisco.com/go/fn. You must have an account on Cisco.com. If you do not have an account or have forgotten your username or password, click Cancel at the login dialog box and follow the instructions that appear.

Contents

Prerequisites for the CISCO-VOICE-CONNECTIVITY-MIB

Information About the CISCO-VOICE-CONNECTIVITY-MIB

CISCO-VOICE-CONNECTIVITY-MIB Objects

Cisco Voice Connectivity MIB Object Groups

How to Use the CISCO-VOICE-CONNECTIVITY-MIB

Prerequisites for the CISCO-VOICE-CONNECTIVITY-MIB

To get the most out of the CISCO-VOICE-CONNECTIVITY-MIB, ensure the following prerequisites are met.

Administrators of the CISCO-VOICE-CONNECTIVITY-MIB must be familiar with Cisco CLI.

Use a MIB browser to interact with the CISCO-VOICE-CONNECTIVITY-MIB

Upload the CISCO-VOICE-CONNECTIVITY-MIB to the NMS

Ensure the SNMP Agent provides SNMP v1 and SNMPv2c compliance

Information About the CISCO-VOICE-CONNECTIVITY-MIB

The CUE software release 2.2 adds an SNMP agent and supports the following MIBs:

SNMPv2-MIB

IF-MIB

IP-MIB

SYSAPPL-MIB

CISCO-PROCESS-MIB

CISCO-UNITY-EXPRESS-MIB

CISCO-VOICE-CONNECIVITY-MIB

The CISCO-VOICE-CONNECIVITY-MIB lists the voice call agents, the defined ports, and the connections status for each

CISCO-VOICE-CONNECTIVITY-MIB Structure

The CISCO-VOICE-CONNECTIVITY-MIB is uniquely identified within the Cisco management (9) group by the number 393.

Therefore, the CISCO-VOICE-CONNECTIVITY-MIB is: 1.3.6.1.4.1.9.9.393

Objects in the CISCO-VOICE-CONNECTIVITY-MIB can be identified by either of the following methods.

The object identifier—1.3.6.1.4.1.9.9.393.<Cisco Cisco Connectivity MIB-variable>

or

The object name—iso(1).org(3).dod(6).internet(1).private(4).enterprise(1).cisco(9).ciscoMgmt(9)
.CISCO-VOICE-CONNECTIVITY-MIB(393).<MIB-variable>

Figure 1 shows the position of the CISCO-VOICE-CONNECTIVITY-MIB in the Internet MIB hierarchy. The CISCO-VOICE-CONNECTIVITY-MIB is part of the Cisco management (9) group, which is presented by private.enterprise.cisco.ciscoMgmt. And is shown graphically in Figure 1.

The CISCO-VOICE-CONNECTIVITY-MIB uses definitions from the following MIBs:

CISCO-SMI

IANAifType-MIB

INET-ADDRESS-MIB

SNMP-FRAMEWORK-MIB

SNMPv2-CONF

SNMPv2-SMI

SNMPv2-TC

Figure 1 CISCO-VOICE-CONNECTIVITY-MIB Tree Structure

The CISCO-VOICE-CONNECTIVITY-MIB structure is divided into the following groups

Cisco Voice Connectivity MIB Groups

ciscoVoiceConnectivityMIBNotifs

ciscoVoiceConnectivityMIBObjects

ciscoVoiceConnectivityMIBMIBConform

The ciscoVoiceConnectivityMIBObjects group is further divided into the following subgroups:

ciscoVoiceConnectivityMIB Objects

cvcCallAgent

cvcPort

cvcCallAgentConnection

cvcNotif

The CISCO-VOICE-CONNECTIVITY-MIB is uniquely identified within the Cisco management (9) group by the number 393.

Therefore, the CISCO-VOICE-CONNECTIVITY-MIB is: 1.3.6.1.4.1.9.9.393

Objects in the CISCO-VOICE-CONNECTIVITY-MIB can be identified by either of the following methods.

The object identifier—1.3.6.1.4.1.9.9.393.<cvc MIB-variable>

or

The object name—iso(1).org(3).dod(6).internet(1).private(4).enterprise(1).cisco(9).ciscoMgmt(9)
.CISCO-VOICE-CONNECTIVITY-MIB(393).<MIB-variable>

Figure 1 shows the position of the CISCO-VOICE-CONNECTIVITY-MIB in the Internet MIB hierarchy.

CISCO-VOICE-CONNECTIVITY-MIB Objects

This section contains the Cisco Voice Connectivity MIB object. Table 1 lists the CISCO-VOICE-CONNECTIVITY-MIB objects, the maximum access for each, and their descriptions. Table 4 lists the CISCO-VOICE-CONNECTIVITY-MIB object IDs (OIDs).

Table 1 CISCO-VOICE-CONNECTIVITY-MIB Groupings and Objects 

Group
Object
Max Access
Description
 

CISCO-VOICE-
CONNECTIVITY-MIB DEFINITIONS

This MIB module provides connectivity related information for devices (e.g., connectivity between voice gateway, phones, gatekeepers, and call processing agent). The MIB can be used by network management applications to collect the information regarding voice connectivity among the devices in the network. The MIB can also be used to retrieve the status of voice connectivity between the devices.

 

-- Voice Connectivity MIB groups

The following are the CISCO-VOICE-CONNECTIVITY-MIB groups:

ciscoVoiceConnectivityMIBNotifs
ciscoVoiceConnectivityMIBObjects
ciscovoiceConnectivityMIBConform

 

-- Voice Connectivity MIB objects

The following are the CISCO-VOICE-CONNECTIVITY-MIB objects:

cvcCallAgent
cvcPort
cvcCallAgentConnection
cvcNotif

 

-- cvc MIB Groups

The following are the CISCO-VOICE-CONNECTIVITY-MIB groups:

ciscoVoiceConnectivityMIBNotifs

ciscoVoiceConnectivityMIBObjects

ciscoVoiceConnectivityMIBConform

 

-- cvc MIB object groups

The following are the CISCO-VOICE-CONNECTIVITY-MIB object groups:

cvcCallAgent

cvcPort

cvcCallAgentConnection

cvcNotif

cvcCallAgent

 

cvcCallAgentTable

not-accessible

This table contains information about call agents.

When the network management subsystem implements this MIB, this table lists the call agents that exist in this system. This table will contain one entry per call agent.

When systems other than those hosting call agents implement this MIB, this table will contain the list of call agents to which ports of this system are associated. The entries would be representative of remote call agents.

For example, if a device is a voice gateway having a T1 port associated with three call processing agents, then this table will have three entries representing each of the three call processing agents.

The network management subsystem adds conceptual rows to this table for every call agent.

 

cvcCallAgentEntry

not-accessible

An entry (conceptual row) in the cvcCallAgent table, providing associated call agent information such as call agent's IP address and its type.

 

cvcCallAgentIndex

not-accessible

An arbitrary integer, a unique value for each call agent associated with the device.

 

cvcCallAgentName

read-only

This object indicates name of the call agent given by call agent administrator.

 

cvcCallAgentInet
AddressType

read-only

This object reflects a particular type of internet address and provides the context for interpreting one or more address objects elsewhere in this MIB module.

 

cvcCallAgentInetAddress

read-only

This object indicates the IP address of the call agent. The type of internet address is indicated by the value of cvcCallAgentInetAddressType.

 

cvcCallAgentType

read-only

This object indicates the type of call agent. A list of call agent types can be found in the CISCO-VOICE-APPLICATIONS-OID-MIB.

cvcPort

 

cvcPortTable

not-accessible

This table contains information about ports.

When the network management subsystem implements this MIB, this table lists all the ports associated with the call agents listed in cvcCallAgentTable.

When systems other than those hosting call agents implement this MIB, this table will contain information of all the ports of the system, associated with the call agents listed in cvcCallAgentTable.

The network management subsystem adds conceptual rows to this table for every port associated to call agent.

 

cvcPortEntry

not-accessible

An entry (conceptual row) in the port table, providing the port or interface information such as name, IP address, type, MAC address, type of the device containing this port and protocol used by the port.

 

cvcPortIndex

read-only

An arbitrary integer value uniquely identifying each physical or virtual port of the device associated with call agent.

 

cvcPortAssociation

read-only

An association to conceptual row of the port define within another MIB group. This can be used to get more information about the port defined in other MIB group. For example, to get more information about the T1 port defined in this table, this attribute points to a row in ifTable for that T1 port, for example, value for this attribute will be 'ifIndex.5'.

 

cvcPortDeviceName

read-only

The device name under which this port has been registered with call agent. This is a mandatory field that represents the port.

 

cvcPortInetAddressType

read-only

This object reflects a particular type of internet address and provides the context for interpreting one or more address objects elsewhere in this MIB module.

 

cvcPortInetAddress

read-only

This object indicates the IP address of the port. The type of internet address is indicated by the value of cvcPortInetAddressType.

 

cvcPortMACAddress

read-only

This object indicates the MAC address of the port. For ports which do not have such an address, this object should contain an octet string of zero length.

 

cvcPortType

read-only

The type of port. Additional values for cvcPortType are assigned by the Internet Assigned Numbers Authority (IANA), through updating the syntax of the IANAifType textual convention.

If the port type is not defined in IANAifType, then value of this object will be other(1). In this case, port type can be identified either by productCategory or by referring to other MIB pointed by cvcPortAssociation.

 

cvcProductCategory

read-only

This object indicates the type of the device that contains the port.

1—phone

2—gateway

3—h323Device

4—ctiDevice

5—voiceMailDevice

6—mediaResourceDevice

7—huntListDevice

8—sipDevice

 

cvcProtocol

read-only

Protocol the port use for communication to its associated device.

1—sccp

2—sgcp

3—mgcp

4—h323

5—sip

 

cvcVirtualInterfaceDN

read-only

This attribute indicates directory number of the port. This attribute is applicable only to virtual or logical interface that is associated with call agent.

cvcCallAgentConnection

 

cvcCallAgentConnectionTable

not-accessible

This table contains current registration status information for all the ports, listed in cvcPortTable, that are associated with the call agents listed cvcCallAgentTable.

The network management subsystem adds a conceptual row to this table per port and its associated call agent pair. Entries in this table depends on entries in cvcPortTable and cvcCallAgentTable.

Deletion of any entry in those other two table will result in deletion of corresponding entry in this table.

 

cvcCallAgentConnectionEntry

not-accessible

An entry (conceptual row) in the cvcCallAgentConnectionTable, containing the information about a port or interface's registration status to call agents.

 

cvcCallAgentPriority

read-only

A port can be associated with multiple call agents. In case of failure of the call agent to which the port has been registered, port falls back to the back-up call agent. To achieve this redundancy each call agent is assigned a priority number in context of port. This object indicates the call agent's priority number.

 

cvcRegistrationStatus

read-only

his syntax is used to identify the registration status of the port with call agent.

1—unknown: The registration status of the port is unknown.

2—not applicable: The registration status of the port is not applicable

3—registered: The port has successfully registered with the call agent

4—unregistered: The port is no longer registered with the call agent

5—rejected: Registration request from the port was rejected by the call agent.

 

cvcStatusReason

read-only

This syntax is used as means of identifying the reasons for a device registration error. Following are possible reason of registration status value.

1—noError: No Error

2—unknown: Unknown error cause

3—configurationError: Device configuration error

4—deviceNameUnresolveable: Unable to resolve the device name to an IP address

5—maxDevRegReached: Maximum number of device registration have been reached

6—connectivityError: Call agent is unable to establish communication with the device during registration

7—initializationError: An error occurred during initialization of the device

8—deviceReset: Indicates that the error was due to device reset.

 

cvcLastStatus
ChangeTime

read-only

The time registration status of the port changed.

 

cvcLastRegistered
Time

read-only

The time the port last registered with the call agent.

cvcNotif

 

cvcNotifEnable

read-write

This variable indicates whether the system generates notifications defined in this MIB. A false value will prevent all the notifications from being generated by this system.


Cisco Voice Connectivity MIB Object Groups

Table 2 lists the CISCO-VOICE-CONNECTIVITY-MIB object name and the corresponding object ID mapping.

There are four CISCO-VOICE-CONNECTIVITY-MIB groups listed in Table 2:

ciscoVoiceConnectivityMIBNotifs

ciscoVoiceConnectivityMIBObjects

ciscovoiceConnectivityMIBConform

Table 2 CISCO-VOICE-CONNECTIVITY-MIB Object ID Mapping 

Object Name
Object ID

ciscoVoiceConnectivityMIB

1.3.6.1.4.1.9.9.393

ciscoVoiceConnectivityMIBNotifs

1.3.6.1.4.1.9.9.393.0

ciscoUnityExpressApplAlert

1.3.6.1.4.1.9.9.393.0.1

ciscoUnityExpressStorageAlert

1.3.6.1.4.1.9.9.393.0.2

ciscoUnityExpressSecurityAlert

1.3.6.1.4.1.9.9.393.0.3

ciscoUnityExpressCallMgrAlert

1.3.6.1.4.1.9.9.393.0.4

ciscoUnityExpressRescExhausted

1.3.6.1.4.1.9.9.393.0.5

ciscoUnityExpressBackupAlert

1.3.6.1.4.1.9.9.393.0.6

ciscoUnityExpressNTPAlert

1.3.6.1.4.1.9.9.393.0.7

ciscoVoiceConnectivityMIBObjects

1.3.6.1.4.1.9.9.393.1

cvcCallAgent

1.3.6.1.4.1.9.9.393.1.1

cvcCallAgentTable

1.3.6.1.4.1.9.9.393.1.1.1

cvcCallAgentEntry

1.3.6.1.4.1.9.9.393.1.1.1.1

  cvcCallAgentIndex

1.3.6.1.4.1.9.9.393.1.1.1.1.1

  cvcCallAgentName

1.3.6.1.4.1.9.9.393.1.1.1.1.2

  cvcCallAgentInetAddressType

1.3.6.1.4.1.9.9.393.1.1.1.1.3

  cvcCallAgentInetAddress

1.3.6.1.4.1.9.9.393.1.1.1.1.4

  cvcCallAgentType

1.3.6.1.4.1.9.9.393.1.1.1.1.5

cvcPort

1.3.6.1.4.1.9.9.393.1.2

cvcPortTable

1.3.6.1.4.1.9.9.393.1.2.1

cvcPortTableEntry

1.3.6.1.4.1.9.9.393.1.2.1.1

  cvcPortIndex

1.3.6.1.4.1.9.9.393.1.2.1.1.1

   cvcPortAssociation

1.3.6.1.4.1.9.9.393.1.2.1.1.2

   cvcPortDeviceName

1.3.6.1.4.1.9.9.393.1.2.1.1.3

   cvcPortInetAddressType

1.3.6.1.4.1.9.9.393.1.2.1.1.4

  cvcPortInetAddress

1.3.6.1.4.1.9.9.393.1.2.1.1.5

  cvcPortMACAddress

1.3.6.1.4.1.9.9.393.1.2.1.1.6

  cvcPortType

1.3.6.1.4.1.9.9.393.1.2.1.1.7

  cvcProductCategory

1.3.6.1.4.1.9.9.393.1.2.1.1.8

  cvcProtocol

1.3.6.1.4.1.9.9.393.1.2.1.1.9

  cvcVirtualInterfaceDN

1.3.6.1.4.1.9.9.393.1.2.1.1.10

cvcCallAgentConnection

1.3.6.1.4.1.9.9.393.1.3

cvcCallAgentConnectionTable

1.3.6.1.4.1.9.9.393.1.3.1

cvcCallAgentConnectionEntry

1.3.6.1.4.1.9.9.393.1.3.1.1

   cvcCallAgentPriority

1.3.6.1.4.1.9.9.393.1.3.1.1.1

   cvcRegistrationStatus

1.3.6.1.4.1.9.9.393.1.3.1.1.2

   cvcStatusReason

1.3.6.1.4.1.9.9.393.1.3.1.1.3

  cvcLastStatusChangeTime

1.3.6.1.4.1.9.9.393.1.3.1.1.4

   cvcLastRegisteredTime

1.3.6.1.4.1.9.9.393.1.3.1.1.5

ciscoVoiceConnectivityMIBConform

1.3.6.1.4.1.9.9.393.2

cvcMIBCompliances

1.3.6.1.4.1.9.9.393.2.1

cvcMIBGroups

1.3.6.1.4.1.9.9.393.2.2

cvcNotif

1.3.6.1.4.1.9.9.393.1.4

cvcNotifEnable

1.3.6.1.4.1.9.9.393.1.4.1

cvcNotificationsGroup

1.3.6.1.4.1.9.9.393.1.5

cvcPortRegistrationStatusChange

1.3.6.1.4.1.9.9.393.1.5.1


Table 3 Cisco Voice Connectivity MIB Groups 

Object Name
Object ID

ciscoVoiceConnectivityMIBNotifs

1.3.6.1.4.1.9.9.393.0

ciscoVoiceConnectivityMIBObjects

1.3.6.1.4.1.9.9.393.1

ciscoVoiceConnectivityMIBConform

1.3.6.1.4.1.9.9.393.2


Table 4 Cisco Voice Connectivity MIB Objects 

Object Name
Object ID

ciscoVoiceConnectivityMIBObjects

1.3.6.1.4.1.9.9.393.1

cvcCallAgentGroup

1.3.6.1.4.1.9.9.393.1.1

cvcPortGroup

1.3.6.1.4.1.9.9.393.1.2

cvcCallAgentConnectionGroup

1.3.6.1.4.1.9.9.393.1.3

cvcNotifGroup

1.3.6.1.4.1.9.9.393.1.4

cvcNotificationsGroup

1.3.6.1.4.1.9.9.393.1.5


Table 5 Cisco Voice Connectivity MIB Conform Objects 

Object Name
Object ID

ciscoVoiceConnectivityMIBConform

1.3.6.1.4.1.9.9.393.2

cvcMIBCompliances

1.3.6.1.4.1.9.9.393.2.1

ccvMIBGroups

1.3.6.1.4.1.9.9.393.2.2


How to Use the CISCO-VOICE-CONNECTIVITY-MIB

The following sections contain information regarding configuring and using the CISCO-VOICE-CONNECTIVITY-MIB.

The snmp-server community string command provides access control for SNMPv1 and SNMPv2c but also continues to provide backward compatibility between different versions. The previous version of this command did not have an option to create a community string that allows SNMP messages to execute a set operation on a MIB object. An rw or ro option has been introduced for this purpose.


Note The SNMP agent is disabled by default, and a community string is not configured.


The following example enables the SNMP agent and assigns the community string comaccess to SNMP:

507-1(config)# snmp-server community comaccess ro 

The preceding example defines a community string comaccess used as a password for authentication when you access the SNMP agent. Any SNMP message sent to the SNMP agent must have the "Community Name" field of the message match the community string defined here in order to be authenticated. Entering a community string enables the SNMP agent.

The following example disables the SNMP agent and removes the previously defined community string.

507-1(config)# no snmp-server community comaccess ro 

Locating the CISCO-VOICE-CONNECTIVITY-MIB

To locate and download MIBs for selected platforms, Cisco IOS releases, and feature sets, use the Cisco MIB Locator found at the following URL:

http://tools.cisco.com/ITDIT/MIBS/servlet/index

If Cisco MIB Locator does not support the MIB information that you need, you can also obtain a list of supported MIBs and download MIBs from the Cisco MIBs page at the following URL:

http://www.cisco.com/public/sw-center/netmgmt/cmtk/mibs.shtml

To access Cisco MIB Locator, you must have an account on Cisco.com. If you have forgotten or lost your account information, send a blank e-mail to cco-locksmith@cisco.com. An automatic check will verify that your e-mail address is registered with Cisco.com. If the check is successful, account details with a new random password will be e-mailed to you. Qualified users can establish an account on Cisco.com by following the directions found at the following URL:

http://tools.cisco.com/RPF/register/register.do

Enabling the SNMP Agent

The SNMP agent for the CISCO-VOICE-CONNECTIVITY-MIB is disabled by default.

Prerequisites

Be sure the router platform is a supported router and the required MIBs are installed.

DETAILED STEPS

 
Command or Action
Purpose

Step 1 

Access your router directly using Telnet or using Terminal server.

Telnets to the router identified by the specified IP address
(represented as xxx.xxx.xxx.xxx).

Step 2 

Router> enable

Enters privileged EXEC mode.

Step 3 

Router# config terminal

Enters global configuration mode.

Step 4 

Router(config)# snmp-server community <password> RO

Enables the read-only (RO) community string, where <password> represents the read-only community/password string.

Step 5 

Router(config)# snmp-server community <password> RW

Enables the read-write (RW) community string, where <password> represents the read-write community/password string.

Step 6 

Router(config)# exit

Exits global configuration mode and returns to privileged EXEC mode.

Step 7 

Router# write memory

Writes the modified configuration to NVRAM, permanently saving the settings.

Verifying the Enabling of the SNMP Agent

To verify that the SNMP agent has been enabled on a given network device, perform the following steps.

DETAILED STEPS


Step 1 Telnet to the target device.

Step 2 Display the running configuration on the device and examine the output for any displayed SNMP information:

Router# show running-config
.
.
.
snmp-server community public RO
snmp-server community private RW
.
.
.

Any "snmp-server" statement appearing in the output that takes the form shown above verifies that SNMP has been enabled on the specified device.


Note You can also use show snmp configuration to display the SNMP configurations made.



Configuring the MIB Browser to Read MIB Values

For the MIB browser to read the MIB values, configure the Cisco Voice Connectivity MIB using the following CLI commands.

MIB Browser Configuration

For the MIB browser to read the Cisco Voice Connectivity MIB values, the browser must be configured.

Prerequisites

Be sure the router platform is a supported router and the required MIBs are installed.

SUMMARY STEPS

1. enter password

2. end the configuration

DETAILED STEPS

 
Command or Action
Purpose

Step 1 

enter password

Example:

snmp-server community <password> RO

Allows the use of a MIB browser to read MIB values, you must configure the CISCO-VOICE-CONNECTIVITY-MIB using CLI.

Where <password> can be any password you choose.

Step 2 

end configuration

Example:

(config) > end

Ends the configuration mode.

Configuring the MIB Browser to Write MIB Values

For the MIB browser to write the MIB values, configure the CISCO-VOICE-CONNECTIVITY-MIB using the following CLI commands.

MIB Browser Configuration

For the MIB browser to write the Cisco Voice Connectivity MIB values, the browser must be configured.

Prerequisites

Be sure the router platform is a supported router and the required MIBs are installed.

SUMMARY STEPS

1. enter password

2. end the configuration

DETAILED STEPS

 
Command or Action
Purpose

Step 1 

enter password

Example:

snmp-server community <password> RW

Allows the use of a MIB browser to write MIB values, you must configure the Cisco Voice Connectivity MIB using CLI.

Where <password> can be any password you choose.

Step 2 

end oonfiguration

Example:

(config) > end

Ends the configuration mode.

What to Do Next

Begin monitoring your network.

Additional References

The following sections provide references related to the CISCO-VOICE-CONNECTIVITY-MIB.

Related Documents

Related Topic
Document Title
   
   
   
   

Standards

Standard
Title

No new or modified standards are supported by this feature.

 

MIBs

MIB
MIBs Link

SNMPv2-SMI

SNMPv2-CONF

SNMPv2-TC

SNMP-FRAMEWORK-MIB

CISCO-SMI

IANAifType-MIB

INET-ADDRESS-MIB

CISCO-VOICE-APPLICATIONS-OID-MIB

CISCO-UNITY-EXPRESS-MIB

To locate and download MIBs for selected platforms, Cisco IOS releases, and feature sets, use Cisco MIB Locator found at the following URL:

http://www.cisco.com/go/mibs


RFCs

RFC
Title
   
   

Technical Assistance

Description
Link

The Cisco Technical Support website contains thousands of pages of searchable technical content, including links to products, technologies, solutions, technical tips, and tools. Registered Cisco.com users can log in from this page to access even more content.

http://www.cisco.com/techsupport


Command Reference

Glossary

CLI—Command Line Interface.

CUE—Cisco Unity Express.

MIB—Management Information Base.

NMS—Network Management System.

SNMP—Simple Network Management Protocol.


Note See Internetworking Terms and Acronyms and Cisco IOS Voice Configuration Library Glossary for terms not included in this glossary.