Cisco Unity Express 2.0 Command Reference
M
Downloads: This chapterpdf (PDF - 177.0KB) The complete bookPDF (PDF - 2.02MB) | Feedback

M

Table Of Contents

M

maxsessions (ccn application)

maxsessions (ccn trigger jtapi)

maxsessions (ccn trigger sip)

maxsteps (ccn engine)

mwi refresh


M


maxsessions (ccn application)

maxsessions (ccn trigger jtapi)

maxsessions (ccn trigger sip)

maxsteps (ccn engine)

mwi refresh

maxsessions (ccn application)

To specify the number of users who can access this application simultaneously, use the maxsessions command in Cisco Unity Express configuration application mode. Use the no form of this command to set the value to 0.

maxsessions number

Syntax Description

number

Specifies the number of users who can access this application simultaneously. The maximum value is determined by the number of ports purchased for the application. The default value is the number of ports granted by the license.


Command Modes

CCN configuration application mode

Command History

Cisco Unity Express Release
Modification

1.0

This command was introduced on the Cisco Unity Express network module and in Cisco CallManager Express 3.0.

1.1

This command was implemented on the advanced integration module (AIM) and in Cisco CallManager 3.3(3).

1.1.2

This command was implemented on the Cisco 2800 series and Cisco 3800 series routers.


Usage Guidelines

Use the maxsessions command to control how many users can use the application simultaneously.

Examples

The following examples sets the maximum number of users to 12.

se-10-0-0-0# config t

se-10-0-0-0(config)# ccn application autoattendant

se-10-0-0-0(config-application)# maxsessions 12

se-10-0-0-0(config-application)# end

se-10-0-0-0(config)# exit

Related Commands

Command
Description

ccn application

Configures the CCN applications, such as voice mail and auto attendant.

show ccn application

Displays the CCN application details.


maxsessions (ccn trigger jtapi)

To specify the number of users who can access this trigger simultaneously, use the maxsessions command in Cisco Unity Express configuration trigger mode. Use the no form of this command to set the value to 0.

maxsessions number

Syntax Description

number

Specifies the number of users who can access this trigger simultaneously. The maximum value is determined by the number of ports purchased for the application. The default value is the number of ports granted by the license.


Command Modes

CCN configuration trigger mode

Command History

Cisco Unity Express Release
Modification

1.0

This command was introduced on the Cisco Unity Express network module and in Cisco CallManager Express 3.0.

1.1

This command was implemented on the advanced integration module (AIM) and in Cisco CallManager 3.3(3).

1.1.2

This command was implemented on the Cisco 2800 series and Cisco 3800 series routers.


Usage Guidelines

Use the maxsessions command to control how many users can use the trigger simultaneously.

Examples

The following examples sets the maximum number of users to 12.

se-10-0-0-0# config t

se-10-0-0-0(config)# ccn trigger jtapi phonenumber 1234

se-10-0-0-0(config-trigger)# maxsessions 12

se-10-0-0-0(config-trigger)# end

se-10-0-0-0(config)# exit

Related Commands

Command
Description

ccn trigger jtapi phonenumber

Enters CCN configuration trigger mode.

show ccn trigger

Displays the CCN trigger details.


maxsessions (ccn trigger sip)

To specify the number of users who can access this trigger simultaneously, use the maxsessions command in Cisco Unity Express configuration trigger mode. Use the no form of this command to set the value to 0.

maxsessions number

Syntax Description

number

Specifies the number of users who can access this trigger simultaneously. The maximum value is determined by the number of ports purchased for the application. The default value is the number of ports granted by the license.


Command Modes

CCN configuration trigger mode

Command History

Cisco Unity Express Release
Modification

1.0

This command was introduced on the Cisco Unity Express network module and in Cisco CallManager Express 3.0.

1.1

This command was implemented on the advanced integration module (AIM) and in Cisco CallManager 3.3(3).

1.1.2

This command was implemented on the Cisco 2800 series and Cisco 3800 series routers.


Usage Guidelines

Use the maxsessions command to control how many users can use the trigger simultaneously.

Examples

The following examples sets the maximum number of users to 12.

se-10-0-0-0# config t

se-10-0-0-0(config)# ccn trigger sip phonenumber 1234

se-10-0-0-0(config-trigger)# maxsessions 12

se-10-0-0-0(config-trigger)# end

se-10-0-0-0(config)# exit

Related Commands

Command
Description

ccn trigger sip phonenumber

Enters CCN configuration trigger mode.

show ccn trigger

Displays the CCN trigger details.


maxsteps (ccn engine)

To specify the maximum number of steps that can be executed in an application, use the maxsteps command in Cisco Unity Express configuration engine mode.

maxsteps number

Syntax Description

number

Specifies the maximum number of steps that can be executed in an application. The default value is 1000.


Defaults

maxsteps: 1000 steps

Command Modes

CCN configuration engine mode

Command History

Cisco Unity Express Release
Modification

1.0

This command was introduced on the Cisco Unity Express network module and in Cisco CallManager Express 3.0.

1.1

This command was implemented on the advanced integration module (AIM) and in Cisco CallManager 3.3(3).

1.1.2

This command was implemented on the Cisco 2800 series and Cisco 3800 series routers.


Usage Guidelines

Use the maxsteps command to specify the maximum number of steps that can be executed in an application.

Examples

The following examples sets the maximum number of steps to 500.

se-10-0-0-0# config t

se-10-0-0-0(config)# ccn engine

se-10-0-0-0(config-engine)# maxsteps 500

se-10-0-0-0(config-engine)# end

se-10-0-0-0(config)# exit

Related Commands

Command
Description

ccn application

Configures the CCN applications, such as voice mail and auto attendant.

show ccn engine

Displays the CCN engine details.


mwi refresh

To refresh the message-waiting indicator (MWI) lights on one or more telephones, use the mwi refresh command in Cisco Unity Express EXEC mode.

mwi refresh {all | telephonenumber tel-number}

Syntax Description

all

Refreshes all telephones configured on the system.

telephonenumber tel-number

Refreshes the specified telephone number or extension.


Command Modes

Cisco Unity Express EXEC

Command History

Cisco Unity Express Release
Modification

1.0

This command was introduced on the Cisco Unity Express network module and in Cisco CallManager Express 3.0.

1.1

This command was implemented on the advanced integration module (AIM) and in Cisco CallManager 3.3(3).

1.1.2

This command was implemented on the Cisco 2800 series and Cisco 3800 series routers.


Usage Guidelines

Use this command to update the MWI lights when they are not in synchronization with the stored voice messages.

Refreshing an extension that does not require it does not affect that extension.

Examples

The following example refreshes the MWIs for all telephones:

se-10-0-0-0> enable
se-10-0-0-0# mwi refresh all

The following example refreshes the MWI for extension 2015:

se-10-0-0-0> enable

se-10-0-0-0# mwi refresh telephonenumber 2015

Related Commands

Command
Description

show groups

Displays a list of all configured groups.

show users

Displays a list of all configured users.

show voicemail

Displays the properties of the configured voice-mail system.