Cisco Unity Express Command Reference for 3.0 and Later Versions
Cisco Unity Express Commands: L
Downloads: This chapterpdf (PDF - 451.0KB) The complete bookPDF (PDF - 18.64MB) | Feedback

L

Table Of Contents

L

license activate ivr sessions

license activate ports

license activate timecardview users

license activate voicemail mailboxes

license agent default authenticate

license agent listener http

license agent max-sessions

license agent notify

license clear

license comment

license install

license modify priority

license revoke

license save

line console

list name

list number

list number delete

list number description

list number member

list number owner

locale (ccn trigger http)-IVR Only

locale (ccn trigger jtapi)

locale (ccn trigger sip)

log console

log console monitor

log server

log trace boot

log trace buffer save

login (aaa accounting event)

login (config-line)

login-fail (aaa accounting event)

login pinless

logout (aaa accounting event)


L


Last Updated: June 4, 2010

license activate ivr sessions

license activate ports

license activate timecardview users

license activate voicemail mailboxes

license agent default authenticate

license agent listener http

license agent max-sessions

license agent notify

license clear

license comment

license clear

license install

license modify priority

license revoke

license save

line console

list name

list number

list number delete

list number description

list number member

list number owner

locale (ccn trigger http)-IVR Only

locale (ccn trigger jtapi)

locale (ccn trigger sip)

log console

log console monitor

log server

log trace boot

log trace buffer save

login (aaa accounting event)

login (config-line)

login-fail (aaa accounting event)

login pinless

logout (aaa accounting event)

license activate ivr sessions

To activate the license for IVR sessions, use the license activate ivr sessions command in Cisco Unity Express EXEC mode. Using the no form of this command sets the usage to zero and disables the feature.

license activate ivr sessions numeric string

no license activate ivr sessions numeric string

Syntax Description

numeric string

Specifies the number of IVR sessions to be activated.The value must be a value that is less than or equal to the number of IVR sessions supported by this platform, and it must be a multiple of two.


Command Default

None.

Command Modes

Cisco Unity Express EXEC

Command History

Cisco Unity Express Version
Modification

7.1

This command was introduced.


Usage Guidelines

This command enables you to activate the license for IVR sessions.

Examples

The following example shows how to activate the license for IVR sessions:

se-10-0-0-0# license activate ivr sessions 4

Related Commands

Command
Description

license activate ports

Activates the license for ports.

license activate timecardview users

Activates the license for TimeCardView users.

license activate voicemail mailboxes

Activates the license for mailboxes.

show license all

Displays a summary of all licenses installed.

show license detail

Displays the details of the installed license.

show license status application

Displays the status of the licenses installed.


license activate ports

To activate the license for ports, use the license activate ports command in Cisco Unity Express EXEC mode. Using the no form of this command sets the usage to zero and disables the feature.

license activate ports numeric string

no license activate ports numeric string

Syntax Description

numeric string

Specifies the number of ports to be activated.The value must be a value that is less than or equal to the number of ports supported by this platform, and it must be a multiple of two.


Command Default

None.

Command Modes

Cisco Unity Express EXEC

Command History

Cisco Unity Express Version
Modification

7.1

This command was introduced.


Usage Guidelines

This command enables you to activate the license for ports.

Examples

The following example shows how to activate the license for ports:

se-10-0-0-0# license activate ports 4

Related Commands

Command
Description

license activate voicemail mailboxes

Activates the license for mailboxes.

license activate ivr sessions

Activates the license for ivr sessions.

license activate timecardview users

Activates the license for TimeCardView users.

show license all

Displays the summary of all licenses installed.

show license detail

Displays the details of the installed licenses.

show license status application

Displays the status of the licenses installed.


license activate timecardview users

To activate the license for TimeCardView users, use the license activate timecardview command in Cisco Unity Express EXEC mode. Using the no form of this command sets the usage to zero and disables the feature.

license activate timecardview users numeric string

no license activate timecardview users numeric string

Syntax Description

numeric string

Specifies the number of TimeCardView users to be activated. The value must be a value that is less than or equal to the number of TimeCardView users supported by this platform.


Command Default

None.

Command Modes

Cisco Unity Express EXEC

Command History

Cisco Unity Express Version
Modification

7.1

This command was introduced.


Usage Guidelines

This command enables you to activate the license for TimeCardView users.

Examples

The following example shows how to activate the license for TimeCardView users:

se-10-0-0-0# license activate timecardview users 4

Related Commands

Command
Description

license activate ports

Activates the license for ports.

license activate voicemail mailboxes

Activates the license for mailboxes.

show license all

Displays a summary of all of the licenses installed.

show license detail

Displays the details of the installed license.

show license status application

Displays the status of the licenses installed.


license activate voicemail mailboxes

To activate the license for voicemail mailboxes, use the license activate voicemail mailboxes command in Cisco Unity Express EXEC mode. Using the no form of this command sets the voicemail mailboxes value to zero and disables the voicemail mailboxes.

license activate voicemail mailboxes numeric string

no license activate voicemail mailboxes numeric string

Syntax Description

numeric string

Specifies the number of mailboxes to be activated. The value must be a value that is less than or equal to the number of mailboxes supported by this platform, and it must be a multiple of five.


Command Default

None.

Command Modes

Cisco Unity Express EXEC

Command History

Cisco Unity Express Version
Modification

7.1

This command was introduced.


Usage Guidelines

This command enables you to activate the license for voicemail mailboxes.

Examples

The following example shows how to activate the license for voicemail mailboxes:

se-10-0-0-0# license activate voicemail mailboxes 275

 
   
Evaluation licenses are being activated in the device for the following feature(s): 
 
   
 Feature Name: VMIVR-VM-MBX
 
   
PLEASE  READ THE  FOLLOWING TERMS  CAREFULLY. INSTALLING THE LICENSE OR
LICENSE  KEY  PROVIDED FOR  ANY CISCO  PRODUCT  FEATURE  OR  USING SUCH
PRODUCT  FEATURE  CONSTITUTES  YOUR  FULL ACCEPTANCE  OF  THE FOLLOWING
TERMS. YOU MUST NOT PROCEED FURTHER IF YOU ARE NOT WILLING TO  BE BOUND
BOUND BY ALL THE TERMS SET FORTH HEREIN.
 
   
You hereby  acknowledge  and  agree that  the  product feature  license
is terminable and that the product  feature  enabled  by  such  license
may  be  shut  down or  terminated by  Cisco  after  expiration of  the
applicable  term  of  the license  (e.g., 30-day  trial  period). Cisco
reserves the  right to terminate or shut down  any such product feature
electronically  or by  any other  means available. While alerts or such
messages  may  be provided, it is  your sole  responsibility to monitor
your terminable  usage of any  product  feature enabled by  the license
and to ensure that your systems and  networks are prepared for the shut
down of the product feature. You acknowledge  and agree that Cisco will
not have any liability  whatsoever for  any damages, including, but not
limited to, direct, indirect, special, or consequential damages related
to any product  feature  being shutdown or terminated. By clicking  the
"accept" button  or typing "yes" you are  indicating  you have read and
agree to be bound by all the terms provided herein.
ACCEPT? [y/n]? yes
 
   

License activation count saved for use at next reload

Related Commands

Command
Description

license activate ports

Activates the license for ports.

license activate timecardview users

Activates the license for TimeCardView users.

license activate voicemail mailboxes

Activates the license for ivr sessions.

show license all

Displays the summary of all the licenses installed.

show license detail

Displays the details of the installed licenses.

show license status application

Displays the status of the licenses installed.


license agent default authenticate

To configure the default license agent, use the license agent default authenticate command in Cisco Unity Express configuration mode. Use the no form of this command to remove the configuration.

license agent default authenticate [none]

no license agent default authenticate [none]

Syntax Description

none

(Optional) Specifies the authentication.


Command Default

None.

Command Modes

Cisco Unity Express Configuration

Command History

Cisco Unity Express Version
Modification

7.1

This command was introduced.


Usage Guidelines

This command starts the default license agent. The authenticate option specifies if the authentication is required. The default license agent starts automatically when the device boots up.

Examples

The following example shows how to configure the license agent:

se-10-0-0-0(config)# license agent default authenticate

Related Commands

Command
Description

license agent listener http

Configures the license agent listener.

license agent max-sessions

Limits the total number of license agent sessions.

license agent notify

Defines a transport notification.


license agent listener http

To configure the license agent in listener mode, use the license agent listener http command in Cisco Unity Express configuration mode. Use the no form of this command to remove the configuration.

Cisco Unity Express 8.0.1 and earlier:

license agent listener http [crypto | plaintext] url-path authenticate [none] [max-message size]

no license agent listener http [crypto | plaintext] url-path authenticate [none] [max-message size]

Cisco Unity Express 8.0.2 and later:

license agent listener http [encrypted | plaintext] url-path authenticate [none] [max-message size]

no license agent listener http [encrypted | plaintext] url-path authenticate [none] [max-message size]

Syntax Description

crypto

or

encrypted

(Optional) Uses an encrypted http transport.

The crypto keyword is supported from Cisco Unity Express versions 7.1.1 through 8.0.1. The encrypted keyword is supported beginning with Cisco Unity Express 8.0.2.

plaintext

(Optional) Uses a plaintext http transport.

url-path

Specifies the listener's URL.

authenticate

Defines the authentication.

none

Defines the default authentication.

max-message size

Defines the maximum message size that the license agent accepts.


Command Default

None.

Command Modes

Cisco Unity Express Configuration

Command History

Cisco Unity Express Version
Modification

7.1

This command was introduced.

8.0.2

The crypto keyword was replaced by the keyword encrypted.


Usage Guidelines

This command starts the license agent in listener mode. The options specifies if you need to use the https or http service, listener's URL, and authentication.

Examples

The following example shows how to authenticate the license agent using the http crypto authentication mechanism:

se-10-0-0-0(config)# license agent listener http crypto path authenticate

Related Commands

Command
Description

license agent default authenticate

Authenticates the license agent by using the default HTTP mechanism.

license agent max-sessions

Limits the total number of license agent sessions.

license agent notify

Defines a transport notification.


license agent max-sessions

To configure the maximum number of HTTP sessions to license agent, use the license agent max-sessions command in Cisco Unity Express configuration mode. Use the no form of this command to remove the configuration.

license agent max-sessions number

no license agent max-sessions number

Syntax Description

number

Specifies the maximum number of license agent sessions. The range is from 4 to 25.


Command Default

None.

Command Modes

Cisco Unity Express Configuration

Command History

Cisco Unity Express Version
Modification

7.1

This command was introduced.


Usage Guidelines

This commands enables you to configure the maximum number of HTTP sessions. The range is from 4 to 25.

Examples

The following example shows how to configure the maximum number of HTTP sessions:

se-10-0-0-0(config)# license agent max-sessions 5

Related Commands

Command
Description

license agent default authenticate

Authenticates the license agent by using the default HTTP mechanism.

license agent max-sessions

Limits the total number of license agent sessions.

license agent notify

Defines a transport notification.


license agent notify

To use a notification transport, use the license agent notify command in Cisco Unity Express configuration mode. Use the no form of this command to remove the configuration.

license agent notify URL

no license agent notify URL

Syntax Description

URL

Specifies the URL path with the quote.


Command Default

None.

Command Modes

Cisco Unity Express Configuration

Command History

Cisco Unity Express Version
Modification

7.1

This command was introduced.


Usage Guidelines

This commands enables you to use a notification transport. When you access or modify a license, an event will be triggered. Information concerning this event is sent as a notification. Some examples of the notifications are:

License installed

License cleared

License revoked

License will expire in some time period

License has expired for some time period

License entry is corrupted

License comment is modified

License Agent is turned off or started up

Counted license notifications

Examples

The following example shows how to configure the notification transport:

se-10-0-0-0(config)# license agent notify http://10.86.26.95/abc ?

credentials Credentials String

username Login name

se-10-0-0-0(config)# license agent notify http://10.86.26.95/abc username anonymous password guest

se-10-0-0-0(config)# end

The following example shows the output show run | include license command

se-10-0-0-0# show run | include license

license agent max-sessions 9

license agent notify http://10.86.26.95/abc credentials hidden 6u/dKTN/hsHQZ6vnngB74bKLbOxLrFmfSd8ZZNgd+Y9J3xlk2B35j0nfGWTYHfmPSd8ZZNgd+Y9J3xlk2B35j0nfGW TYHfmPSd8ZZNgd+Y9J3xlk2B35j0nfGWTYHfmP

Command
Description

license agent default authenticate

Authenticates the license agent by using the default HTTP mechanism.

license agent max-sessions

Limits the total number of license agent sessions.


license clear

To remove one or more licenses information from your device, use the license clear feature command in Cisco Unity Express EXEC mode.

license clear feature name

Syntax Description

feature name

Specifies the feature name.


Command Default

None.

Command Modes

Cisco Unity Express EXEC

Command History

Cisco Unity Express Version
Modification

7.1

This command was introduced.


Usage Guidelines

This command enables you to remove the license entry from your device.

Examples

The following example shows how to clear the license for a feature:

se-10-0-0-0# license clear TCV-USER

Feature: TCV-USER

1 License Type: Evaluation

License State: Active, Not in Use, EULA accepted

Evaluation total period: 4 weeks 2 days

Evaluation period left: 4 weeks 2 days

License Addition: Additive

License Count: 2

Comment:

Store Index: 4

Store Name: Primary License Storage

Are you sure you want to clear? (yes/[no]): yes


Note The application will evaluate the changes in the next reboot.


Related Commands

Command
Description

license comment

Adds or deletes a comment for a specific license.

license modify priority

Modifies the license priority information.


license comment

To add or delete a comment for a specific license, use the license comment command in Cisco Unity Express EXEC mode.

license comment {add | delete} feature name comment string

Syntax Description

add

Adds the comment to the feature.

delete

Deletes the comment from the feature.

feature name

Specifies the feature name.

comment string

Specifies a text description of the comment string.


Command Default

None.

Command Modes

Cisco Unity Express EXEC

Command History

Cisco Unity Express Version
Modification

7.1

This command was introduced.


Usage Guidelines

This command enables you to add or delete comments for a specific license line. This can be done only for the installed licenses.

Examples

The following example adds a comment to the license:

se-10-0-0-0# license comment add TCV-USER test

Feature: TCV-USER

1 License Type: Evaluation

License State: Active, Not in Use, EULA accept

Evaluation total period: 4 weeks 2 days

Evaluation period left: 4 weeks 2 days

License Addition: Additive

License Count: 2

Comment:

Store Index: 4

Store Name: Primary License Storage

% Success: Adding comment "test" succeeded

Related Commands

Command
Description

license clear

Clears the license information from your system.

license modify priority

Modifies the license priority information.


license install

To install the licenses, use the license install command in Cisco Unity Express EXEC mode.

license install URL

Syntax Description

URL

Specifies the URL of the license file. FTP /TFTP are the supported protocols.


Command Default

None.

Command Modes

Cisco Unity Express EXEC

Command History

Cisco Unity Express Version
Modification

7.1

This command was introduced.


Usage Guidelines

This commands enables you to install the license stored in a license file.

Examples

The following example shows how to install the license for a feature:

se-10-0-0-0# license install ftp://192.1.1.53/lic/nme-159/nme-159.lic

Installing...Feature:VMIVR-IVR-SESS...Successful:Supported

License Note:

Application will evaluate this change upon next reload

Installing...Feature:VMIVR-VM-MBX...Successful:Supported

License Note:

Application will evaluate this change upon next reload

Installing...Feature:TCV-USER...Successful:Supported

License Note:

Application will evaluate this change upon next reload

Installing...Feature:VMIVR-PORT...Successful:Supported

License Note:

Application will evaluate this change upon next reload

4/4 licenses were successfully installed

0/4 licenses were existing licenses

0/4 licenses were failed to install

 
   

The installation process does not install duplicate licenses. The following message is displayed when duplicate licenses are detected:

Installing...Feature:xxx-xxx-xxx...Skipped:Duplicate

Related Commands

Command
Description

license clear

Clears the license information from your system.

license modify priority

Modifies the license priority information.

show license all

Displays a summary of all of the licenses installed.

show license detail

Displays the details of the installed license.


license modify priority

To modify the license priority information, use the license modify priority command in Cisco Unity Express EXEC mode.

license modify priority feature name {high | low}

Syntax Description

high

Sets the license priority level to high.

low

Sets the license priority level to low.


Command Default

None.

Command Modes

Cisco Unity Express EXEC

Command History

Cisco Unity Express Version
Modification

7.1

This command was introduced.


Usage Guidelines

This commands enables you to modify the license priority level. This command lists all the expiring licenses that are available for the specified feature and you can change the priority level to be the highest for the selected license.

Examples

The following example shows how to change the license priority level:

se-10-0-0-0# license modify priority TCV-USER high

Feature: TCV-USER

Index: 1 License type : Evaluation

Lock type : Locked

License Count : 2

License Priority: Low

Are you sure you want to modify priority? (yes/[no]): yes


Note The application will evaluate the changes in the next reboot.


Related Commands

Command
Description

license revoke

Revokes the license.

license save

Saves the license and device credential information.

show license all

Displays the summary of all of the licenses installed.

show license detail

Displays the details of the installed license.


license revoke

To revoke the license, use the license revoke command in Cisco Unity Express EXEC mode.

license revoke URL URL

Syntax Description

URL

Specifies the URL path for the permission ticket file.

URL

Specifies the URL path for the destination to rehost ticket file


Command Default

None.

Command Modes

Cisco Unity Express EXEC

Command History

Cisco Unity Express Version
Modification

7.1

This command was introduced.


Usage Guidelines

This command enables you to revoke the license. Rehost operation has multiple steps, which helps in moving a license from Source device (X) to a Target device (Y).

To revoke the license, perform the following steps:

1. To enable the revoke, obtain a permission ticket from the SWIFT portal and save it on the FTP (TFTP) server which is accessible to the module.

2. Enter the license revoke command, a grace period licenses is issued and accept the EULA for this grace license.

3. After the EULA is accepted, a Revocation ticket is generated as a result of the revoke operation.

4. To complete the Rehost operation, submit the Revocation ticket to the SWIFT portal to obtain a new license file that can be installed on a target device Y.

For example, permanent licenses of 225 count exist for MBX feature. Now permission ticket of 100 count is obtained from SWIFT to revoke 100 count out of 225 counts.

After installing the 225 count Grace (Extension) license, the remaining count of 125 count permanent license is installed as part of revoke operation.

Examples

The following example shows how to revoke the licenses:

se-10-0-0-0# show lic de VMIVR-VM-MBX

Feature: VMIVR-VM-MBX Period left: Life time

Index: 1 Feature: VMIVR-VM-MBX Version: 1.0

License Type: Permanent

License State: Active, In Use

License Count: 225 /100

License Priority: Medium

Store Index: 3

Store Name: Primary License Storage

Index: 2 Feature: VMIVR-VM-MBX Version: 1.0

License Type: Evaluation

License State: Inactive

Evaluation total period: 8 weeks 4 days

Evaluation period left: 8 weeks 4 days

License Count: 600 / 0

License Priority: None

Store Index: 0

Store Name: Evaluation License Storage

se-10-0-0-0# license revoke ?

URL URL of the permission ticket

se-10-0-0-0# license revoke ftp://10.xx.xx.195/LIC-FILES/VEGA/FHH12460003_100-MBX.lic-PT ?

URL URL destination for rehost ticket

se-10-0-0-0# license revoke ftp://10.xx.xx.195/LIC-FILES/VEGA/FHH12460003_100-MBX.lic-PT ftp://10.1.1.1/permissionticketfile-100MBX

Following Permanent license(s) will be installed on this device

Feature Name: VMIVR-VM-MBX :Count = 125

Following Extension license(s) will be installed on this device

Feature Name: VMIVR-VM-MBX :Count = 225

Following Permanent license(s) will be revoked from this device

Feature Name: VMIVR-VM-MBX :Count = 225

PLEASE READ THE FOLLOWING TERMS CAREFULLY. INSTALLING THE LICENSE OR

LICENSE KEY PROVIDED FOR ANY CISCO PRODUCT FEATURE OR USING SUCH

PRODUCT FEATURE CONSTITUTES YOUR FULL ACCEPTANCE OF THE FOLLOWING

TERMS. YOU MUST NOT PROCEED FURTHER IF YOU ARE NOT WILLING TO BE BOUND

BOUND BY ALL THE TERMS SET FORTH HEREIN.

You hereby acknowledge and agree that the product feature license

is terminable and that the product feature enabled by such license

may be shut down or terminated by Cisco after expiration of the

applicable term of the license (e.g., 30-day trial period). Cisco

reserves the right to terminate or shut down any such product feature

electronically or by any other means available. While alerts or such

messages may be provided, it is your sole responsibility to monitor

your terminable usage of any product feature enabled by the license

and to ensure that your systems and networks are prepared for the shut

down of the product feature. You acknowledge and agree that Cisco will

not have any liability whatsoever for any damages, including, but not

limited to, direct, indirect, special, or consequential damages related

to any product feature being shutdown or terminated. By clicking the

"accept" button or typing "yes" you are indicating you have read and

agree to be bound by all the terms provided herein.

ACCEPT? [yes/no]: yes

License Note:

Application will evaluate this change upon next reload

Application will evaluate this change upon next reload

Rehost ticket saved ..... to ftp://10.1.1.1/permissionticketfile-100MBX

se-10-0-0-0# reload

vega# show license detail VMIVR-VM-MBX

Feature: VMIVR-VM-MBX Period left: Life time

Index: 1 Feature: VMIVR-VM-MBX Version: 1.0

License Type: Permanent

License State: Active, In Use

License Count: 125 /125

License Priority: Medium

Store Index: 0

Store Name: Primary License Storage

Index: 2 Feature: VMIVR-VM-MBX Version: 1.0

License Type: Evaluation

License State: Inactive

Evaluation total period: 8 weeks 4 days

Evaluation period left: 8 weeks 4 days

License Count: 225 / 0

License Priority: Low

Store Index: 4

Store Name: Primary License Storage

Index: 3 Feature: VMIVR-VM-MBX Version: 1.0

License Type: Evaluation

License State: Inactive

Evaluation total period: 8 weeks 4 days

Evaluation period left: 8 weeks 4 days

License Count: 600 / 0

License Priority: Low

Store Index: 0

Store Name: Evaluation License Storage

Related Commands

Command
Description

license save

Saves the license and device credential information.

license install

Installs the license on your system.

show license all

Displays the summary of all the licenses installed.

show license detail

Displays the details of the installed license.


license save

To save a copy of the all the licenses installed, use the license save command in Cisco Unity Express EXEC mode.

license save {credential | URL} URL

Syntax Description

credential

Saves the device credential information.

URL

Defines the URL destination path for the license file.

URL

Defines the URL destination path for saving the device credential information.


Command Default

None.

Command Modes

Cisco Unity Express EXEC

Command History

Cisco Unity Express Version
Modification

7.1

This command was introduced.


Usage Guidelines

The command enables you to saves a copy of the all the licenses installed in the license storage to a specified file. These licenses include all node locked licenses which are installed on a device and it does not include the evaluation licenses

Examples

The following example shows how to save the license installed on your device:

se-10-0-0-0# license save credential ftp://anonymous:guest@10.86.26.195/NME-Credential 
Device credential saved ..... to ftp://anonymous:guest@10.86.26.195/NME-Credential
 
   
se-10-0-0-0# license save ftp://anonymous:guest@10.86.26.195/License-Copy  
license lines saved ..... to ftp://anonymous:guest@10.86.26.195/License-Copy

Related Commands

Command
Description

license revoke

Revokes the license.

license clear

Clears the license information from your system.

show license all

Displays a summary of all of the licenses installed.

show license detail

Displays the details of the installed license.


line console

To enter config-line submode and specify whether the console connection is subject to authentication, use the line console command in Cisco Unity Express configuration mode.

line console

Syntax Description

This command has no arguments or keywords.

Defaults

None.

Command Modes

Cisco Unity Express configuration (config)

Command History

Cisco Unity Express Version
Modification

7.0

This command was introduced.


Usage Guidelines

After you enter config-line submode, the only property that you can configure is whether the console connection is subject to authentication. To do this, enter the login command.

If authentication is not enabled for the console connection, any user logging into the system through the console is given the superuser privilege and is not required to provide a username or password.

Examples

The following example enables authentication for the console:

se-10-0-0-0# config t
se-10-0-0-0(config)# line console
se-10-0-0-0(config-line)# login

Related Commands

Command
Description

login (config-line)

Configures whether the console connection is subject to authentication.


list name

To create a public distribution list, use the list name command in Cisco Unity Express configuration mode. This command does not have a no form.

list name list-name number list-number create

Syntax Description

list-name

Name of the list. Valid names have up to 64 characters letters and include letters A to Z, a to z, digits 0 to 9, underscore (_), dot (.), and dash (-). Names must start with a letter. Do not use spaces in the name.

number list-number

Number of the list. Valid public list numbers can have up to 15 digits.

create

Activates the list.


Defaults

The system creates the everyone list with number 999 to contain everyone on the system.

Command Modes

Cisco Unity Express configuration

Command History

Cisco Unity Express Version
Modification

2.1

This command was introduced.


Usage Guidelines

Each list must have a unique name or number.

The system supports a maximum of 15 public lists.

A list number can match the subscriber's or general delivery mailbox (GDM) telephone number but must not match another local public list number.

The system automatically assigns 9999 to the default everyone public list. An administrator can change this number using the GUI menu option Voice Mail > Distribution Lists > Public Lists. The 9999 number cannot be changed using TUI options or CLI commands.

A local subscriber cannot modify a remote distribution list and cannot use a remote distribution list as the recipient of a voice message.


Note Use the graphical user interface (GUI) or telephone user interface (TUI) to create and manage private distribution lists.


Examples

The following example creates public distribution list number 12 for designers:

se-10-0-0-0# config t
se-10-0-0-0(config)# list name designers number 12 create
se-10-0-0-0(config)# exit
 
   

Related Commands

Command
Description

list number delete

Deletes a public distribution list from the local system.

list number description

Assigns a description to a public distribution list.

list number member

Assigns members to a public distribution list.

list number owner

Assigns an owner to a public distribution list.

show lists public

Displays all public lists on the system.


list number

To add a nonsubscriber as a member of a distribution list, use the list member command in Cisco Unity Express configuration mode. Use the no form of the command to remove the member.

list number list-number member member-number type non-subscriber

no list number list-number membermember-number type non-subscriber

Syntax Description

list-number

ID number of the distribution list.

member-number

ID number of the non-subscriber to associate the distribution list.


Defaults

None.

Command Modes

Cisco Unity Express configuration

Command History

Cisco Unity Express Version
Modification

3.2

This command was introduced.


Usage Guidelines

After this command is executed, the system verifies that the number satisfies the rules of the restriction table.If the restriction table does not match, it returns an error saying that "the number entered is restricted."

If this command is entered and the restriction table is later updated to not allow the new entry, the number added to the distribution list will not be removed. However, when a new message is addressed using the list with the now restricted non-subscriber number, the system will prevent the message from being sent to the restricted number in the distribution list. All other addresses contained in the distribution list that are not restricted will have the message delivered to them.

Examples

The following example adds a member with number 12 to distribution list number 7215551413:

se-10-0-0-0# config t
se-10-0-0-0 (config)# list number 12 member 7215551413 type nonsubscriber
type non-subscriber
se-10-0-0-0 (config)# exit

Related Commands

Command
Description

show lists detail private

Displays the details of the private distribution lists for a specified owner.

show lists owner

Displays all the public and private distribution lists for a specified owner.

show lists public

Displays all public distribution lists on the local system.


list number delete

To delete a public distribution list from the local system, use the list number delete command in Cisco Unity Express configuration mode. This command does not have a no form.

list number list-number delete

Syntax Description

list-number

Number of the list. Valid public list numbers can have up to 15 digits.


Defaults

No list number is deleted.

Command Modes

Cisco Unity Express configuration

Command History

Cisco Unity Express Version
Modification

2.1

This command was introduced.


Usage Guidelines

An error message appears if the list does not exist.

A local subscriber or administrator cannot delete a public distribution list at a remote site.


Note Use the graphical user interface (GUI) or telephone user interface (TUI) to create and manage private distribution lists.


Examples

The following example deletes list number 35:

se-10-0-0-0# config t
se-10-0-0-0(config)# list number 35 delete
se-10-0-0-0(config)# exit

Related Commands

Command
Description

list name

Creates a public distribution list.

list number description

Assigns a description to a public distribution list.

list number member

Assigns members to a public distribution list.

list number owner

Assigns an owner to a public distribution list.

show lists public

Displays all public lists on the system.


list number description

To add a description to a public distribution list, use the list number description command in Cisco Unity Express configuration command. To delete the description, use the no form of this command.

list number list-number description description

no list number list-number description description

Syntax Description

list-number

Number of the list. Valid public list numbers can have up to 15 digits.

description

Text description of the list. Enclose the text in double quotes (" ") if the text is more than one word.


Defaults

No description is defined.

Command Modes

Cisco Unity Express configuration

Command History

Cisco Unity Express Version
Modification

2.1

This command was introduced.


Usage Guidelines

An error message appears if the list does not exist.


Note Use the graphical user interface (GUI) or telephone user interface (TUI) to create and manage private distribution lists.


Examples

The following example assigns a description to list number 35:

se-10-0-0-0# config t
se-10-0-0-0(config)# list number 35 description "SJC Engineers"
se-10-0-0-0(config)# exit

Related Commands

Command
Description

list name

Creates a public distribution list.

list number delete

Deletes a public distribution list from the local system.

list number member

Assigns members to a public distribution list.

list number owner

Assigns an owner to a public distribution list.

show lists public

Displays all public lists on the system.


list number member

To add members to a public distribution list, use the list number member command in Cisco Unity Express configuration mode. To delete the member from the list, use the no form of this command.

list number list-number member {member-name | extension}
type {group | user | gdm | list | remote | blind}

no list number list-number member {member-name | extension}
type {group | user | gdm | list | remote | blind}

Syntax Description

list-number

Number of the list. Valid public list numbers can have up to 15 digits.

member-name

Name of the member to be added. Valid members include:

Local or remote subscribers

Group IDs

General delivery mailbox (GDM) name

Voice mailbox extension (blind address)

Other public distribution list numbers

Other public distribution list names

extension

Extension of the member to be added.

type

Category of the member. Valid values are:

group—The member is a group.

user—The member is a local subscriber.

gdm—The member is a general delivery mailbox.

list—The member is a public distribution list.

remote—The member is a remote subscriber.

blind—The member is a voice mailbox extension (blind address).


Defaults

No list members are configured.

Command Modes

Cisco Unity Express configuration

Command History

Cisco Unity Express Version
Modification

2.1

This command was introduced.


Usage Guidelines

An error message appears if the member name or extension does not exist. Additionally, the system verifies that the public list has members. If the list is empty, the system plays a prompt indicating that the list contains no members and does not allow the list to be used as a recipient of the message.

The maximum number of public list members is 1000 for the system. An error message appears if a new member would exceed the maximum.

A remote subscriber that is statically configured on the local system can be a member of a distribution list. However, that remote subscriber cannot own a distribution list on the local system.

A private list cannot be a member of a public list.

Recursive distribution lists are permitted; for example, list A can be a member of list B and list B can be a member of list A.

To use a blind address, specify the location ID and extension of the blind address. The system verifies the location ID and extension length.


Note Use the graphical user interface (GUI) or telephone user interface (TUI) to create and manage private distribution lists.


Examples

The following example assigns members to list number 35:

se-10-0-0-0# config t
se-10-0-0-0(config)# list number 35 member user2 type user
se-10-0-0-0(config)# list number 35 member user7 type user
se-10-0-0-0(config)# list number 35 member supervisors type group
se-10-0-0-0(config)# list number 35 member sales type gdm
se-10-0-0-0(config)# list number 35 member project3 type list
se-10-0-0-0(config)# list number 35 member user4 type remote
se-10-0-0-0(config)# list number 35 member nyc72222 type blind
se-10-0-0-0(config)# exit
 
   

The following examples delete members from list number 35:

se-10-0-0-0# config t
se-10-0-0-0(config)# no list number 35 member user2 type user
se-10-0-0-0(config)# no list number 35 member sales type gdm
se-10-0-0-0(config)# exit

Related Commands

Command
Description

list name

Creates a public distribution list.

list number delete

Deletes a public distribution list from the local system.

list number description

Assigns a description to a public distribution list.

list number owner

Assigns an owner to a public distribution list.

show lists public

Displays all public lists on the system.


list number owner

To assign an owner to a public distribution list, use the list number owner command in Cisco Unity Express configuration mode. To delete the list owner, use the no form of this command.

list number list-number owner owner-ID

no list number list-number owner owner-ID

Syntax Description

list-number

Number of the list. Valid public list numbers can have up to 15 digits.

owner-ID

Name of the list owner.


Defaults

No list number or list owner is configured.

Command Modes

Cisco Unity Express configuration

Command History

Cisco Unity Express Version
Modification

2.1

This command was introduced.


Usage Guidelines

The list owner can be a local subscriber or a local group. If the owner is a group, all the members of the group are owners of the list. The default list everyone cannot have an owner.

The list owner can edit and delete members of the list and can assign other owners to the list.

An error message appears if the list number or list owner does not exist.

The maximum number of owners on the system is 50. An error message appears if a new owner ID would exceed the maximum number of list owners.

Members of the Administrators group are implicit owners of all public distribution lists and can edit any public list at any time. If all the owners of a list are deleted, the Administrator group continues to have ownership of the list.

The owner of a public or private distribution list can record a spoken name for the list using the TUI. The default everyone public list has a spoken name by default. An administrator can change this name using the TUI.


Note Use the graphical user interface (GUI) or telephone user interface (TUI) to create and manage private distribution lists.


Examples

The following example assigns user2 as the owner of list number 35:

se-10-0-0-0# config t
se-10-0-0-0(config)# list number 35 owner user2
se-10-0-0-0(config)# exit
 
   

The following example deletes the owner of list 35:

se-10-0-0-0# config t
se-10-0-0-0(config)# no list number 35 owner user2
se-10-0-0-0(config)# exit

Related Commands

Command
Description

list name

Creates a public distribution list.

list number delete

Deletes a public distribution list from the local system.

list number description

Assigns a description to a public distribution list.

list number member

Assigns members to a public distribution list.

show lists public

Displays all public lists on the system.


locale (ccn trigger http)-IVR Only

To specify the language to use for the prompts that the caller hears when a Cisco Unity Express IVR HTTP-based trigger is activated, use the locale command in Cisco Unity Express IVR HTTP trigger configuration mode. Use the no form of this command to set the language to the systemDefault.

locale xx_YY

no locale

Syntax Description

xx_YY

Specifies the language used for the prompts heard by the caller. Cisco Unity Express supports several languages but only one language can be used for all triggers on the system. See Release Notes for Cisco Unity Express for the current list of supported languages.


Command Default

The default locale is systemDefault.

Command Modes

Cisco Unity Express IVR HTTP trigger configuration

Command History

Cisco Unity Express Version
Modification

3.0

This command was introduced.


Examples

The following example sets the trigger language to US English:

se-10-0-0-0# config t

se-10-0-0-0(config)# ccn trigger http urlname myhttpapp

Adding new trigger

se-10-0-0-0(config-trigger)# locale en_US

se-10-0-0-0(config-trigger)# end

se-10-0-0-0(config)# exit
 
   

The following example sets the trigger language to the default (systemDefault):

se-10-0-0-0# config t

se-10-0-0-0(config)# ccn trigger http urlname myhttpapp

Adding new trigger

se-10-0-0-0(config-trigger)# no locale

se-10-0-0-0(config-trigger)# end

se-10-0-0-0(config)# exit

Related Commands

Command
Description

show ccn trigger http-IVR Only

Displays the trigger and application settings. Use the show ccn trigger http command option to display the Cisco Unity Express IVR HTTP-based trigger settings.


locale (ccn trigger jtapi)

To specify the language used for the prompts that are heard by the caller when a JTAPI trigger is activated, use the locale command in Cisco Unity Express CCN configuration trigger mode. To set the language to the system default, use the no form of this command.

locale xx_YY

no locale

Syntax Description

xx_YY

Specifies the language used for the prompts heard by the caller. Cisco Unity Express supports several languages but only one language can be used for all triggers on the system. See Release Notes for Cisco Unity Express for the current list of supported languages.


Defaults

U.S. English

Command Modes

CCN configuration trigger

Command History

Cisco Unity Express Version
Modification

1.0

This command was introduced on the Cisco Unity Express network module and in Cisco Unified Communications Manager Express 3.0.

1.1

This command was implemented on the advanced integration module (AIM) and in Cisco Unified Communications Manager 3.3(3).

1.1.2

This command was implemented on the Cisco 2800 series and Cisco 3800 series routers.


Examples

The following example sets the trigger language to French.

se-10-0-0-0# config t

se-10-0-0-0(config)# ccn trigger jtapi phonenumber 1234

se-10-0-0-0(config-trigger)# locale fr_FR

se-10-0-0-0(config-trigger)# end

se-10-0-0-0(config)# exit

Related Commands

Command
Description

ccn trigger jtapi phonenumber

Enters trigger configuration mode.

show ccn trigger all

Displays the CCN trigger details.


locale (ccn trigger sip)

To specify the language used for the SIP system prompts that are heard by the caller when a SIP trigger is activated, use the locale command in Cisco Unity Express CCN configuration trigger mode. To set the language to the system defaults, use the no form of this command.

locale xx_YY

no locale

Syntax Description

xx_YY

Specifies the language used for the prompts heard by the caller. Cisco Unity Express supports several languages but only one language can be used for all triggers on the system. See Release Notes for Cisco Unity Express for the current list of supported languages.


Defaults

U.S. English

Command Modes

CCN configuration trigger

Command History

Cisco Unity Express Version
Modification

1.0

This command was introduced on the Cisco Unity Express network module and in Cisco Unified Communications Manager Express 3.0.

1.1

This command was implemented on the advanced integration module (AIM) and in Cisco Unified Communications Manager 3.3(3).

1.1.2

This command was implemented on the Cisco 2800 series and Cisco 3800 series routers.


Examples

The following example sets the trigger language to French.

se-10-0-0-0# config t

se-10-0-0-0(config)# ccn trigger sip phonenumber 1234

se-10-0-0-0(config-trigger)# locale fr_FR

se-10-0-0-0(config-trigger)# end

se-10-0-0-0(config)# exit

Related Commands

Command
Description

ccn trigger sip phonenumber

Enters trigger configuration mode.

show ccn trigger all

Displays the CCN trigger details.


log console

To configure the types of messages to be displayed on the console, use the log console command in Cisco Unity Express configuration mode. To stop messages from displaying, use the no form of this command.

log console {errors | info | warning}

no log console {errors | info | warning}


Caution This command generates many screen messages that scroll down the screen until you turn off the display. Seeing the prompt to turn off the display may be difficult. Pressing CTRL-c does not work for this command.

Syntax Description

errors

Error messages.

info

Information messages.

warning

Warning messages.


Defaults

Only fatal error messages are displayed.

Command Modes

Cisco Unity Express configuration

Command History

Cisco Unity Express Version
Modification

1.0

This command was introduced on the Cisco Unity Express network module and in Cisco Unified Communications Manager Express 3.0.

1.1

This command was implemented on the advanced integration module (AIM) and in Cisco Unified Communications Manager 3.3(3).

1.1.2

This command was implemented on the Cisco 2800 series and Cisco 3800 series routers.


Usage Guidelines

The messages on the console display are also saved in the messages.log file. These messages can be used for debugging purposes.

Examples

The following example configures error messages to be displayed on the console:

se-10-0-0-0# config t
se-10-0-0-0(config)# log console errors
se-10-0-0-0(config)# exit
 
   

Related Commands

Command
Description

show logging

Displays the types of messages that are displayed on the console.


log console monitor

To display system messages on the console, use the log console monitor command in Cisco Unity Express configuration mode. To stop messages from displaying, use the no form of this command.

log console monitor {module | entity | activity}

no log console monitor {module | entity | activity}


Caution This command generates many screen messages that scroll down the screen until you turn off the display. Seeing the prompt to turn off the display may be difficult. Pressing CTRL-c does not work for this command.

Syntax Description

module

Cisco Unity Express modules.

entity

Cisco Unity Express module entities.

activity

Cisco Unity Express entity actions.


Defaults

Only fatal error messages are displayed.

Command Modes

Cisco Unity Express EXEC

Command History

Cisco Unity Express Version
Modification

1.0

This command was introduced on the Cisco Unity Express network module and in Cisco Unified Communications Manager Express 3.0.

1.1

This command was implemented on the advanced integration module (AIM) and in Cisco Unified Communications Manager 3.3(3).

1.1.2

This command was implemented on the Cisco 2800 series and Cisco 3800 series routers.


Usage Guidelines

The messages on the console monitor are also saved in the messages.log file. These messages can be used for debugging purposes.

Examples

The following example displays messages for results of the database entity in the networking module:

se-10-0-0-0# log console monitor networking database results

Related Commands

Command
Description

show logging

Displays the types of messages that are displayed on the console.


log server

To configure an external server for saving log messages, use the log server command in Cisco Unity Express configuration mode. To delete the log server, use the no form of this command.

log server address {ip-address | hostname}

no log server address {ip-address | hostname}

Syntax Description

address ip-address

IP address of the external log server.

address hostname

Hostname of the external log server.


Defaults

No external log server is configured. The local hard disk is used for saving log messages.

Command Modes

Cisco Unity Express configuration

Command History

Cisco Unity Express Version
Modification

1.0

This command was introduced on the Cisco Unity Express network module and in Cisco Unified Communications Manager Express 3.0.

1.1

This command was implemented on the advanced integration module (AIM) and in Cisco Unified Communications Manager 3.3(3).

1.1.2

This command was implemented on the Cisco 2800 series and Cisco 3800 series routers.


Usage Guidelines

An external log server contains a copy of the messages.log file that is stored on the hard disk of the router that contains the Cisco Unity Express module. Copying the file to a server permits flexibility in viewing, printing, and troubleshooting system messages.

Examples

The following example assigns 10.1.61.16 as the external log server:

se-10-0-0-0# config t
se-10-0-0-0(config)# log server address 10.1.61.16
se-10-0-0-0(config)# exit

Related Commands

Command
Description

hostname

Specifies the server that stores the Cisco Unity Express applications.

ntp server

Specifies the NTP clocking server.

show hosts

Displays all configured hosts.

show running-config

Displays the log server as part of the configuration.


log trace boot

To save the trace configuration upon rebooting, use the log trace boot command in Cisco Unity Express EXEC mode.

log trace boot

Syntax Description

This command has no arguments or keywords.

Command Modes

Cisco Unity Express EXEC

Command History

Cisco Unity Express Version
Modification

1.1

This command was introduced on the Cisco Unity Express network module (NM), advanced integration module (AIM), and in Cisco Unified Communications Manager Express 3.3(3).

1.1.2

This command was implemented on the Cisco 2800 series and Cisco 3800 series routers.


Usage Guidelines

The current trace configuration is lost upon reboot because tracing is CPU intensive. To ensure that the current trace configuration is saved when the CUE module is rebooted, use the log trace boot command.

Examples

The following example illustrates the log trace boot command:

se-10-0-0-0# log trace boot

Related Commands

Command
Description

show trace store

Displays the modules and entities being traced.


log trace buffer save

To save the current trace information, use the log trace buffer save command in Cisco Unity Express EXEC mode. To turnoff the log trace, use the no form of this command.

log trace buffer save

no log trace buffer

Syntax Description

This command has no arguments or keywords.

Command Modes

Cisco Unity Express EXEC

Command History

Cisco Unity Express Version
Modification

1.1

This command was introduced on the Cisco Unity Express network module (NM), advanced integration module (AIM), and in Cisco Unified Communications Manager Express 3.3(3).

1.1.2

This command was implemented on the Cisco 2800 series and Cisco 3800 series routers.


Usage Guidelines

Current trace information stored in the memory buffer can be saved to a file. The file created with the log trace buffer save command is atrace_save.log.

Examples

The following example illustrates the log trace buffer save command:

se-10-0-0-0# log trace buffer save

Related Commands

Command
Description

show logs

Displays a list of the trace logs.

show trace buffer

Displays the modules and entities being traced.


login (aaa accounting event)

To enable or disable the logging of login events, use the login command in Cisco Unity Express AAA accounting event configuration mode. Use the no form of this command to disable the logging of login events. Use the default form of this command to restore the default setting (the logging of login events is enabled).

login

no login

default login

Syntax Description

This command has no arguments or keywords.

Command Default

The logging of login events is enabled.

Command Modes

Cisco Unity Express AAA accounting event configuration (aaa-accounting-event)

Command History

Cisco Unity Express Version
Modification

7.0

This command was introduced.


Usage Guidelines

This command enables the logging of all forms of system access except IMAP, including access to the CLI, GUI, TUI, and VVE, when a login is required. This command does not enable the logging of failed login attempts.

Examples

The following example disables the logging of login events:

se-10-0-0-0# config t

se-10-0-0-0(config)# aaa accounting event

se-10-0-0-0(aaa-accounting-event)# no login

Related Commands

Command
Description

aaa accounting enable

Enables the recording of AAA accounting events.

aaa accounting event

Enters AAA accounting submode and configures event filtering for accounting packets.

show aaa accounting event

Shows the AAA accounting events that are designated to be logged.


login (config-line)

To specify whether the console connection is subject to authentication, use the login command in Cisco Unity Express line configuration mode. Use the no or default form of this command to disable console authentication.

login

no login

default login

Syntax Description

This command has no arguments or keywords.

Defaults

There is no console authentication

Command Modes

Cisco Unity Express line configuration (config-line)

Command History

Cisco Unity Express Version
Modification

7.0

This command was introduced.


Usage Guidelines

To configure whether the console connection is subject to authentication, you must first enter the line console command and then the login command.

If authentication is not enabled for console connection, any user logging into the system through the console is given the superuser privilege and is not required to provide a username or password.

Examples

The following example enables authentication for the console:

se-10-0-0-0# config t
se-10-0-0-0(config)# line console
se-10-0-0-0(config-line)# login

Related Commands

Command
Description

license activate voicemail mailboxes

Enters config-line submode.


login-fail (aaa accounting event)

To enable or disable the logging of failed login attempts, use the login-fail command in Cisco Unity Express AAA accounting event configuration mode. Use the no form of this command to disable the logging of failed login attempts. Use the default form of this command to restore the default setting (the logging of failed login attempts is enabled).

login-fail

no login-fail

default login-fail

Syntax Description

This command has no arguments or keywords.

Command Default

The logging of failed login attempts is enabled.

Command Modes

Cisco Unity Express AAA accounting event configuration (aaa-accounting-event)

Command History

Cisco Unity Express Version
Modification

7.0

This command was introduced.


Usage Guidelines

This command enables the logging of failed login attempts for all forms of system access except IMAP, including access to the CLI, GUI, TUI, and VVE, when a login is required.

Examples

The following example disables the logging of failed login attempts:

se-10-0-0-0# config t

se-10-0-0-0(config)# aaa accounting event

se-10-0-0-0(aaa-accounting-event)# no login-fail

Related Commands

Command
Description

aaa accounting enable

Enables the recording of AAA accounting events.

aaa accounting event

Enters AAA accounting submode and configures event filtering for accounting packets.

show aaa accounting event

Shows the AAA accounting events that are designated to be logged.


login pinless

To configure pin login behavior for the mailbox, use the login pinless command in Cisco Unity Express config-mailbox mode. Use the no or default version to return to the default setting, requiring callers to enter a PIN to access their mailbox.

login pinless {subscriber-phones | any-phone}

no login pinless

Syntax Description

subscriber-phone-
number

Allows callers to access their voice mailbox from any phone configured for the mailbox owner without entering a PIN.

any-phone-number

Allows callers to access to their voice mailbox from any phone without entering a PIN.


Defaults

Callers must enter a PIN to access their mailbox.

Command Modes

Cisco Unity Express config-mailbox

Command History

Cisco Unity Express Version
Modification

3.2

This command was introduced.


Usage Guidelines

By default, a PIN is required to access voice mailboxes. You must configure this command to allow PINless access.

When you allow a caller to PINless access the voice mailbox from any phone configured for the mailbox owner, this includes access from the subscriber's configured extension, E.164 number, or fax numbers. Any callers not originating from one of these sources ware required to enter a PIN to gain access to the voice mailbox with this configuration.

This command is valid only for personal mailboxes. You cannot use this command to configure a GDM to use PINless login.

The following example allows callers to access their voice mailbox from any phone configured for the mailbox owner without entering a PIN:

se-10-0-0-0# config t
se-10-0-0-0(config)# voice mailbox owner user4
se-10-0-0-0(config-mailbox)# login pinless subscriber-phones 
se-10-0-0-0(config-mailbox)# exit

Related Commands

Command
Description

show voicemail

Displays properties configured for the voice-mail system.


logout (aaa accounting event)

To enable or disable the logging of logout events, use the logout command in Cisco Unity Express AAA accounting event configuration mode. Use the no form of this command to disable the logging of logout events. Use the default form of this command to restore the default setting (the logging of logout events is enabled).

logout

no logout

default logout

Syntax Description

This command has no arguments or keywords.

Command Default

The logging of logout events is enabled.

Command Modes

Cisco Unity Express AAA accounting event configuration (aaa-accounting-event)

Command History

Cisco Unity Express Version
Modification

7.0

This command was introduced.


Usage Guidelines

This command enables the logging of all forms of system access except IMAP, including access to the CLI, GUI, TUI, and VVE, when a login is required before logout.

Examples

The following example disables the logging of logout events:

se-10-0-0-0# config t

se-10-0-0-0(config)# aaa accounting event

se-10-0-0-0(aaa-accounting-event)# no logout

Related Commands

Command
Description

aaa accounting enable

Enables the recording of AAA accounting events.

aaa accounting event

Enters AAA accounting submode and configures event filtering for accounting packets.

show aaa accounting event

Shows the AAA accounting events that are designated to be logged.