Guest

Cisco Unity

Use the Installation Guide That Matches the Cisco Unity 8.x Configuration

  • Viewing Options

  • PDF (89.2 KB)
  • Feedback
Use the Installation Guide That Matches the Cisco Unity 8.x Configuration

Table Of Contents

Use the Installation Guide That Matches the Cisco Unity 8.x Configuration

Installation Guide for Cisco Unity Release 8.x in a Unified Messaging Configuration (With Microsoft Exchange and Without Failover)

Installation Guide for Cisco Unity Release 8.x in a Voice Messaging Configuration (With Microsoft Exchange and Without Failover)

Installation Guide for Cisco Unity Release 8.x in a Unified Messaging Configuration (With Microsoft Exchange and With Failover Configured)

Installation Guide for Cisco Unity Release 8.x in a Voice Messaging Configuration (With Microsoft Exchange and With Failover Configured)


Use the Installation Guide That Matches the Cisco Unity 8.x Configuration


Published February 2, 2010

There are four versions of the Installation Guide for Cisco Unity Release 8.x, each containing instructions for a specific configuration. Use the list below to confirm that you are using the correct version of the guide for the Cisco Unity version 8.x configuration that you are installing.

All installation guides are available at http://www.cisco.com/en/US/products/sw/voicesw/ps2237/prod_installation_guides_list.html.

Installation Guide for Cisco Unity Release 8.x in a Unified Messaging Configuration (With Microsoft Exchange and Without Failover)

This version of the guide is for a Cisco Unity Unified Messaging server running version 8.x, and using Exchange 2007 or Exchange 2003 as the partner Exchange server. The server is not configured for Cisco Unity failover.

Use this guide when any Cisco Unity subscriber mailboxes will be homed in Exchange 2007, Exchange 2003, and/or Exchange 2000.

http://www.cisco.com/en/US/docs/voice_ip_comm/unity/8x/installation/guide/umnofo/8xcuigumnofox.html

Installation Guide for Cisco Unity Release 8.x in a Voice Messaging Configuration (With Microsoft Exchange and Without Failover)

This version of the guide is for a Cisco Unity Voice Messaging server running version 8.x, and using Exchange 2007 or Exchange 2003 as the message store. The server is not configured for Cisco Unity failover.

http://www.cisco.com/en/US/docs/voice_ip_comm/unity/8x/installation/guide/vmnofo/8xcuigvmnofox.html

Installation Guide for Cisco Unity Release 8.x in a Unified Messaging Configuration (With Microsoft Exchange and With Failover Configured)

This version of the guide is for a Cisco Unity Unified Messaging server running version 8.x, and using Exchange 2007 or Exchange 2003 as the partner Exchange server. In addition, Cisco Unity failover is configured.

Use this guide when any Cisco Unity subscriber mailboxes will be homed in Exchange 2007, Exchange 2003, and/or Exchange 2000.

http://www.cisco.com/en/US/docs/voice_ip_comm/unity/8x/installation/guide/umfo/8xcuigumfox.html

Installation Guide for Cisco Unity Release 8.x in a Voice Messaging Configuration (With Microsoft Exchange and With Failover Configured)

This version of the guide is for a Cisco Unity Voice Messaging server running version 8.x, and using Exchange 2007 or Exchange 2003 as the message store. In addition, Cisco Unity failover is configured.

http://www.cisco.com/en/US/docs/voice_ip_comm/unity/8x/installation/guide/vmfo/8xcuigvmfox.html


Any Internet Protocol (IP) addresses and phone numbers used in this document are not intended to be actual addresses and phone numbers. Any examples, command display output, network topology diagrams, and other figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses or phone numbers in illustrative content is unintentional and coincidental.