Guest

Cisco Unity

Use the Installation Guide That Matches the Cisco Unity 5.x Configuration

  • Viewing Options

  • PDF (174.6 KB)
  • Feedback
Use the Installation Guide That Matches the Cisco Unity 5.x Configuration

Table Of Contents

Use the Installation Guide That Matches the Cisco Unity 5.x Configuration

Installation Guide for Cisco Unity Release 5.x in a Unified Messaging Configuration with Microsoft Exchange (Without Failover)

Installation Guide for Cisco Unity Release 5.x in a Voice Messaging Configuration with Microsoft Exchange (Without Failover)

Installation Guide for Cisco Unity Release 5.x with IBM Lotus Domino (Without Failover)

Installation Guide for Cisco Unity Release 5.x in a Unified Messaging Configuration with Microsoft Exchange (With Failover Configured)

Installation Guide for Cisco Unity Release 5.x in a Voice Messaging Configuration with Microsoft Exchange (With Failover Configured)

Installation Guide for Cisco Unity Release 5.x with IBM Lotus Domino (With Failover Configured)


Use the Installation Guide That Matches the Cisco Unity 5.x Configuration


Published June 15, 2007

There are six versions of the Cisco Unity installation guide, each containing instructions for a specific configuration. Use the following list to confirm that you are using the correct version of the guide for the Cisco Unity version 5.x configuration that you are installing.

All Cisco Unity installation guides are available at http://www.cisco.com/en/US/products/sw/voicesw/ps2237/prod_installation_guides_list.html.

Installation Guide for Cisco Unity Release 5.x in a Unified Messaging Configuration with Microsoft Exchange (Without Failover)

This version of the guide is for a Cisco Unity Unified Messaging system running version 5.x, and using Exchange 2007, Exchange 2003, or Exchange 2000 as the partner Exchange server. The system is not configured for Cisco Unity failover.

Use this guide when any Cisco Unity subscriber mailboxes will be homed in Exchange 2007, Exchange 2003, and/or Exchange 2000.

http://www.cisco.com/en/US/products/sw/voicesw/ps2237/prod_installation_guides_list.html

Installation Guide for Cisco Unity Release 5.x in a Voice Messaging Configuration with Microsoft Exchange (Without Failover)

This version of the guide is for a Cisco Unity Voice Messaging system running version 5.x, and using Exchange 2003 or Exchange 2000 as the message store. The system is not configured for Cisco Unity failover.

http://www.cisco.com/en/US/products/sw/voicesw/ps2237/prod_installation_guides_list.html

Installation Guide for Cisco Unity Release 5.x with IBM Lotus Domino (Without Failover)

This version of the guide is for a Cisco Unity Unified Messaging or Voice Messaging system running 5.x, and using Domino as the message store. The system is not configured for Cisco Unity failover.

http://www.cisco.com/en/US/products/sw/voicesw/ps2237/prod_installation_guides_list.html

Installation Guide for Cisco Unity Release 5.x in a Unified Messaging Configuration with Microsoft Exchange (With Failover Configured)

This version of the guide is for a Cisco Unity Unified Messaging system running version 5.x, and using Exchange 2007, Exchange 2003, or Exchange 2000 as the partner Exchange server. The system is also configured for Cisco Unity failover.

Use this guide when any Cisco Unity subscriber mailboxes will be homed in Exchange 2007, Exchange 2003, and/or Exchange 2000.

http://www.cisco.com/en/US/products/sw/voicesw/ps2237/prod_installation_guides_list.html

Installation Guide for Cisco Unity Release 5.x in a Voice Messaging Configuration with Microsoft Exchange (With Failover Configured)

This version of the guide is for a Cisco Unity Voice Messaging system running version 5.x, and using Exchange 2003 or Exchange 2000 as the message store. The system is also configured for Cisco Unity failover.

http://www.cisco.com/en/US/products/sw/voicesw/ps2237/prod_installation_guides_list.html

Installation Guide for Cisco Unity Release 5.x with IBM Lotus Domino (With Failover Configured)

This version of the guide is for a Cisco Unity Unified Messaging or Voice Messaging system running version 5.x, and using Domino as the message store. The system is also configured for Cisco Unity failover.

http://www.cisco.com/en/US/products/sw/voicesw/ps2237/prod_installation_guides_list.html


© 2007 Cisco Systems, Inc. All rights reserved.