Configuration Guide for Cisco Unified MeetingPlace Release 8.6
Monitoring and Maintaining the Web Server
Downloads: This chapterpdf (PDF - 236.0KB) The complete bookPDF (PDF - 7.28MB) | Feedback

Monitoring and Maintaining the Web Server

Table Of Contents

Monitoring and Maintaining the Web Server

IIS File Deletion

Checking the Versions of Local Cisco Unified MeetingPlace Web Server Modules

How to Schedule a Maintenance Window

Reserve All Ports Meetings

Scheduling a Maintenance Window

Optimizing the Performance of a Web Server

Rebooting the Server

How to Monitor Cisco Unified MeetingPlace Web Server Activities

Using the Cisco Unified MeetingPlace Eventlog

Running the Windows Performance Monitoring Tool

Viewing an Event with the Windows Event Viewer

How to Configure the Lumberjack Logging Utility

Lumberjack Logging Utility

Configuring Lumberjack on the Cisco Unified MeetingPlace Web Server

Manually Generating a Lumberjack Snapshot

How to Switch the Order of IP Addresses on the Web Server

Changing the Binding Order for a System with One IP Address on Each NIC

Changing the Binding Order for a System with Two IP Addresses on One NIC

Making the Change in the Application

Audio-only Deployment - Changing the IP Address or Hostname for a Web Server and an Application Server

Removing the Connection to the Application Server

Changing the IP Address or Hostname of the Application Server

Changing the Domain Name of the Application Server

Changing the IP Address for a Domain Name Server or a Network Time Protocol Server

Updating DNS Entries

Re-establishing a Connection to an Application Server

Failover Deployment - Changing the IP Address or Hostname for a Web Server and an Application Server

Switching the Primary Server to Single Server Mode

Switching the Secondary Server to Single Server Mode

Initialize Replication on the Primary and Secondary Application Servers

Multinode Deployment - Changing the IP Address or Host Name for a Web Server and an Application Server

Entering Updated Hostnames and IP Addresses on Cisco WebEx Node for MCS

Updating the Cisco WebEx Site

Web Server with Segmented Meeting Access - Changing the IP Address or Hostname

Turning Off SSL on Internal and External Cisco Unified MeetingPlace Web Servers

Turning Off SMA for Cisco Unified MeetingPlace Web Server

Turning On SMA for Cisco Unified MeetingPlace Web Server


Monitoring and Maintaining the Web Server



Note This topic does not apply to deployments in which users schedule meetings from the Cisco WebEx site. For information about Cisco WebEx integration deployments, see the Planning Guide for Cisco Unified MeetingPlace at http://www.cisco.com/en/US/products/sw/ps5664/ps5669/
products_implementation_design_guides_list.html
.


We recommend that you monitor heavily used systems at short intervals, such as biweekly or weekly. Monitor systems with lighter use less frequently, such as once a month.

IIS File Deletion

Checking the Versions of Local Cisco Unified MeetingPlace Web Server Modules

How to Schedule a Maintenance Window

Optimizing the Performance of a Web Server

Rebooting the Server

How to Monitor Cisco Unified MeetingPlace Web Server Activities

How to Configure the Lumberjack Logging Utility

How to Switch the Order of IP Addresses on the Web Server

Audio-only Deployment - Changing the IP Address or Hostname for a Web Server and an Application Server

Failover Deployment - Changing the IP Address or Hostname for a Web Server and an Application Server

Multinode Deployment - Changing the IP Address or Host Name for a Web Server and an Application Server

Web Server with Segmented Meeting Access - Changing the IP Address or Hostname

IIS File Deletion

IIS file deletion is optional. If you want to clean up the IIS web server, then understand the following:

Deleting the default SMTP virtual server or the Administration website in IIS does not have any effect on the Cisco Unified MeetingPlace web user portal.

Subfolders under wwwroot, such as images, _private, _vti_cnf, _vti_log, _vti_pvt, _vti_script and _vti_txt folders all come from Microsoft FrontPage. Deleting these subfolders can cause difficulty with Microsoft FrontPage when publishing to that server.

Parent Paths are enabled in the Default website, the MPWeb virtual directory and the cgi-bin virtual directory. Enabling Parent Paths allows anonymous users to use `..' to move from the current directory to the parent. Disable this function to prevent such users from traversing the directory tree.

Checking the Versions of Local Cisco Unified MeetingPlace Web Server Modules

Complete this procedure to check the release number of most local Cisco Unified MeetingPlace Web Server software modules. Releases of all listed modules, with the exception of Gateway SIM, must match, that is, 8.0.x.x, where x.x is the same across all modules.

Procedure


Step 1 Sign in to the Cisco Unified MeetingPlace web user portal.

Step 2 Click Admin.

Step 3 Click Versions.

Step 4 Review your module versions.

Step 5 Click Back to return to the main Administration screen.


How to Schedule a Maintenance Window

Reserve All Ports Meetings

Scheduling a Maintenance Window

Reserve All Ports Meetings

When you need to schedule time to perform upgrades or other maintenance activities to the Cisco Unified MeetingPlace system, schedule a Reserve All Ports meeting. When you schedule a Reserve All Ports meeting, the Cisco Unified MeetingPlace system performs the following actions:

Reserves all available ports, or the maximum number of user licenses available in the system

Blocks out all new callers for the duration of the scheduled meeting

Prohibits the extension of in-session meetings that began before the Reserve All Ports meeting begins

Reserve All Ports meetings are scheduled, private meetings. The meeting attributes are the same as for scheduled meetings, with the exceptions described in the following table.

Attribute
Value

Frequency

Once

# of calling sites

SysMaintenance

Record meeting?

No

Meeting name

SysMaintenance

Meeting type

All Speaker


Related Topics

Scheduling a Maintenance Window

Scheduling a Maintenance Window


Caution As a system administrator, it is your responsibility to ensure that no regular meetings are scheduled before scheduling a Reserve All Ports meeting.


Caution Reserve All Ports meetings prevent the system from scheduling any meetings. Also, during a Reserve All Ports meeting, no prompts are played to alert users to the situation. For these reasons, we strongly recommend that you schedule Reserve All Ports meetings during the lowest usage times. In addition, be sure to cancel any Reserve All Ports meetings that you later determine you do not need.

Before You Begin

Remember the following information:

You cannot extend a scheduled Reserve All Ports meeting, but you can reschedule the meeting.

Only one Reserve All Ports meeting can be scheduled at a time (one Reserve All Ports meeting must be finished or deleted before another can be scheduled).

If a Reserve All Ports meeting overlaps another scheduled meeting that is then canceled, the Reserve All Ports meeting reserves the ports released by the other meeting.

Scheduled Reserve All Ports meetings appear in the server exception log, and any changes to a meeting (such as deleting or rescheduling) are shown in the log.

If callers dial in to the server while a Reserve All Ports meeting is in session (and all ports are reserved), they hear nothing (silence).

The meeting ID for a Reserve All Ports meeting cannot be changed.

Procedure


Step 1 Sign in to the Cisco Unified MeetingPlace web user portal with an administrator profile.

Step 2 Click Schedule Meeting.

Step 3 Enter your date, time, and duration of your maintenance window.

Step 4 Click More Options.

Step 5 Check Reserve all ports meeting.

Step 6 Click Submit.

Step 7 Click Schedule.


Optimizing the Performance of a Web Server

Procedure


Step 1 Sign in to the Cisco Unified MeetingPlace web user portal.

Step 2 Click Admin.

Step 3 Click Web Server.

Scroll down to the "View" section of the page.

Step 4 Click the name of the Web Server that you want to configure.

Information about this Web Server populates the "Edit" section of the page.

Step 5 Select the setting that best describes your conferencing environment for Performance Tuning.


Note Setting this parameter to the highest level on a computer with inadequate hardware results in poor user performance.


Step 6 Click Submit.


Related Topics

Field Reference: Web Server Specific Fields

Rebooting the Server

Complete the following procedure to shut down and restart the Web Server computer from the Web Administration.

Procedure


Step 1 Sign in to the Cisco Unified MeetingPlace web user portal.

Step 2 Click Admin.

Step 3 Click Reboot Server.

Step 4 Click OK to confirm the reboot.

The system shuts down and restarts.


How to Monitor Cisco Unified MeetingPlace Web Server Activities

The Windows Event Viewer application and the Cisco Unified MeetingPlace Eventlog application both log all Web Server activities. You can use these logs to monitor or troubleshoot the Cisco Unified MeetingPlace Web Server.

Using the Cisco Unified MeetingPlace Eventlog

Running the Windows Performance Monitoring Tool

Viewing an Event with the Windows Event Viewer

Related Topics

Using Alarms and Logs

How to Configure the Lumberjack Logging Utility

Using the Cisco Unified MeetingPlace Eventlog

The Eventlog application logs all activities specific to Cisco Unified MeetingPlace Web Master Service.

Procedure


Step 1 Right-click the Cisco Unified MeetingPlace icon in the system tray.

Step 2 Select Eventlog.

A DOS command window will open that will contain a view of the latest log messages, which will update as new log messages are generated.


Running the Windows Performance Monitoring Tool

Complete this procedure to monitor the Cisco Unified MeetingPlace Web Server software performance object in the Windows performance monitoring tool.

Procedure


Step 1 Click Start > Run.

The Run window displays.

Step 2 Enter Perfmon.

The Performance window displays.

Step 3 Click the Add (+) button.

The Add Counters window displays.

Step 4 Locate the Performance object field.

Step 5 Select MeetingPlace Web Server.

If your system was migrated from a previous release to Release 8.6, then select MeetingPlace Web Conferencing instead.

Step 6 Select to add or explain specific counters.

Click a counter from the list and click Explain to get more information about it.

Click a counter from the list and click Add to enable it.


Related Topics

Counters Available in the Cisco Unified MeetingPlace Performance Object

Viewing an Event with the Windows Event Viewer

The application log provides detailed information about the Cisco Unified MeetingPlace Web Master Service. For more information about the Windows Event Viewer, see your Windows documentation.

Procedure


Step 1 Click Start > Control Panel > Administrative Tools > Event Viewer.

Step 2 Select Application from the left pane.

A list of events appear in the right pane.

Step 3 Double-click the event to view it.


How to Configure the Lumberjack Logging Utility

Lumberjack is a logging utility that runs as a background thread. Lumberjack periodically dumps several logs at 24-hour intervals and stores those logs, as well as a specified number of older logs, in a configurable location. All the configuration settings are stored in the registry and worked in to the current registry setting structure of Cisco Unified MeetingPlace. Performance monitor logging configuration settings are stored in definition INI file, so counter list and logging interval can be easily changed.

Lumberjack Logging Utility

Configuring Lumberjack on the Cisco Unified MeetingPlace Web Server

Manually Generating a Lumberjack Snapshot

Lumberjack Logging Utility

Upon startup of the master service, a new thread for Lumberjack begins. Lumberjack reads the configuration values from the registry and INI file to determine behavior. If a performance monitor definition INI file does not exist, Lumberjack automatically creates a file with a predefined counter list and logging interval by using the Lumberjack default values.

Every 24 hours, Lumberjack creates a new Gateway SIM event log for a 24-hour window. If the eventlog terminates before midnight, Lumberjack restarts it. If the event log runs past midnight of the day that the first call was made, Lumberjack terminates that process. During routing log gathering, Lumberjack also acquires the following information:

Performance monitor (24-hour window)

NT Application and System eventlog

Registry snapshots

IIS Log

When the master service is running and Lumberjack is enabled, it detects stopped (crashed) services. and collects the following information in a temp folder in the windows temp directory:

GWSIM eventlog (24 hour window)

NT Application and System eventlog

Registry snapshots

IIS log

DrWtsn.log and User.dmp

.exe, .map, and .pdb of downed services

binaries for authfilt.dll (if downed IIS)

After the information is collected, Lumberjack bundles the files by using pkzipc.exe. This executable file is distributed with MPWEB and located in the DataSvc folder.

The naming convention for the file is lumberjack_timestamp.zip for routine logs and lumberjackCrash_timestamp.zip for crash logs, where timestamp is the time the log gathering started for routine logs and the time of the detected crash for crash logs.

If the master service is simply stopped, the temp directory that is created for routine logs is not deleted so that the logs for one day are bundled together if there is a restart of the master service. This functionality enables the logs that are captured to be reviewed without having to open a zip file and allows for a quicker shutdown and restart of master service because the service does not have to wait to zip files and remove the directory.

Configuring Lumberjack on the Cisco Unified MeetingPlace Web Server

Before You Begin

Read the "Lumberjack Logging Utility" section.

Procedure


Step 1 Select Start > Run.

The Run window displays.

Step 2 Enter regedit.

Step 3 Change your registry settings for key HKLM\Software\Latitude\MeetingPlace WebPublisher\General\ and for key HKLM\Software\Latitude\MeetingPlace Gateway SIM\General\ as shown in the following table:

Name (Type)
Description
Data and Default

Key: HKLM\Software\Latitude\MeetingPlace WebPublisher\General\

Server Logging (DWORD)

Enables and disables Lumberjack.

0 - Disabled

1 - Enabled

Default is 1.

Log Crash History (DWORD)

Specifies the number of old crash logs to store.

Default is 10.

Log History (DWORD)

Specifies the number of old routine logs to store.

Default is 15.

Log Location (String)

Specifies where to store the .zip files containing logs.

Default is install-location\Cisco Systems\LogFiles.

InstallLocation (String)

Used for gathering .dll, .exe, .map, and .pdb files.

Default is set by the Cisco Unified MeetingPlace Web Server software.

Key: HKLM\Software\Latitude\MeetingPlace Gateway SIM\General\

InstallLocation (String)

Used for running Gateway SIM eventlog.

Default is set by Gateway SIM.



Related Topics

Stopping, Starting, or Restarting the Cisco Unified MeetingPlace Web Master Service

Manually Generating a Lumberjack Snapshot

Logs gathered because of a manual snapshot request have the format lumberjackSnapshot__timestamp.zip.

You can locate these logs either in the default LogFiles folder or in the folder that you specified when you completed the "Configuring Lumberjack on the Cisco Unified MeetingPlace Web Server" section.

Procedure


Step 1 Right-click the Cisco Unified MeetingPlace red door icon on the Web Server.

Step 2 Select Capture Logs.

The snapshot log gathering process begins.


How to Switch the Order of IP Addresses on the Web Server

This topic applies only if you upgraded from Release 7.0 to Release 8.0.

Based on the NIC binding order, the system assigns the first IP address to the Hostname [Web Conferencing] and the second IP address to the Hostname [Home Page].


Note If you ever change an IP address to a hostname or FQDN, be sure that you replace it with the hostname or FQDN corresponding to that IP address. Do not switch the order of the IP addresses or hostnames as this will cause problems.


If you want to switch the order of the IP addresses, complete the following in the order presented. Select the first or second topic based on your system configuration:

Changing the Binding Order for a System with One IP Address on Each NIC

Changing the Binding Order for a System with Two IP Addresses on One NIC

Making the Change in the Application

Changing the Binding Order for a System with One IP Address on Each NIC

Complete this procedure if you have one IP address on each NIC. If you do not, complete the "Changing the Binding Order for a System with Two IP Addresses on One NIC" section instead.

Procedure


Step 1 On the Start menu, click Settings > Control Panel > Network Connections.

Step 2 Click Advanced > Advanced Settings.

Step 3 Change the order of the IP addresses/NICs by using the up and down arrows.


What to Do Next

Proceed to the "Making the Change in the Application" section.

Changing the Binding Order for a System with Two IP Addresses on One NIC

Complete this procedure if you have two IP addresses on a single NIC. If you do not, complete the "Changing the Binding Order for a System with One IP Address on Each NIC" section instead.

Procedure


Step 1 Change the primary IP address to the virtual IP address.

Step 2 Change the virtual IP address to the primary IP address.


What to Do Next

Proceed to the "Making the Change in the Application" section.

Making the Change in the Application

Before You Begin

Depending on your system, complete one of the following:

Changing the Binding Order for a System with One IP Address on Each NIC

Changing the Binding Order for a System with Two IP Addresses on One NIC

Procedure


Step 1 Sign in to the Cisco Unified MeetingPlace web user portal.

Step 2 Click Admin > Web Server.

Step 3 From the "View" section of the page, click the name of the web server that you want to configure.

This populates the "Edit" section of the page with predefined settings.

Step 4 Change the order of the IP addresses for the Hostname [Home Page] and the Hostname [Web Conferencing].


Note The Hostname [Web Conferencing] field appears only if you upgraded from Release 7.0 to Release 8.0.


Step 5 Restart the Cisco Unified MeetingPlace Web Master Service.


Related Topics

Stopping, Starting, or Restarting the Cisco Unified MeetingPlace Web Master Service

Audio-only Deployment - Changing the IP Address or Hostname for a Web Server and an Application Server


Note This table includes links to sections within this chapter. Each of these sections provides detailed information on the specific task. After you complete each task, return to this table to complete the next task.


Task
Description
For details, see

Step 1 

Remove all connections from the Web Server to the Application Server.

Removing the Connection to the Application Server

Step 2 

On the Application Server you can change the hostname and IP address using the net command.

Changing the IP Address or Hostname of the Application Server

Step 3 

You can change the domain name of the Application Server using the net command.

Changing the Domain Name of the Application Server

Step 4 

On the Cisco Unified MeetingPlace Web Server, you can change the IP address for the Domain Name Server or a Network Time Protocol Server.

Changing the IP Address for a Domain Name Server or a Network Time Protocol Server

Step 5 

You can update your Domain Name Server and Cisco Unified Call Manager with the new hostname and IP address of Application Server and Cisco Unified MeetingPlace Web Server.

Updating DNS Entries

Step 6 

Reconnect the Cisco Unified MeetingPlace Web Server to the Application Server.

Re-establishing a Connection to an Application Server

Related Topics

Multinode Deployment - Changing the IP Address or Host Name for a Web Server and an Application Server

Web Server with Segmented Meeting Access - Changing the IP Address or Hostname

Failover Deployment - Changing the IP Address or Hostname for a Web Server and an Application Server

Removing the Connection to the Application Server

This procedure is completed on the Cisco Unified MeetingPlace Web Server.

Procedure


Step 1 Sign in to the Web Server.

Step 2 Stop the web services and the Gateway SIM service, including the Replication Service and Agent Service.

Step 3 Choose Start > Programs > Cisco Unified MeetingPlace Configuration > Cisco Unified MeetingPlace Gateway Configuration to open the Cisco Unified MeetingPlace Gateways Configuration utility.

Step 4 Select the Gateway SIM tab.

Step 5 Delete this unit from the active Application Server.

a. Go to the lower-left pane of the Gateway SIM tab.

b. Select the name of the Application Server that you want to disconnect from.

c. Select Delete.

Step 6 Close the Cisco Unified MeetingPlace Gateways Configuration utility.

Step 7 Change the IP address or host name of the Cisco Unified MeetingPlace Web Server.

Step 8 Disable the usage of unused Web Server hostnames.

a. Sign in to the Administration Center.

b. Select System Configuration > Web Servers.

c. Select the Edit link of the hostname that is no longer used.

d. On the Edit Web Server dialog, set the Enabled field to no.

e. Select Save.


Related Topics

Audio-only Deployment - Changing the IP Address or Hostname for a Web Server and an Application Server

Changing the IP Address or Hostname of the Application Server

Changing the IP Address or Hostname of the Application Server

This procedure is completed on the Cisco Unified MeetingPlace Application Server.


Note If the Application Server is installed on a virtual machine hosted on a UCS server, changing the hostname, IP address, subnet mask, primary DNS or time zone changes the Licensing MAC address of the server. This will make the existing license invalid. Contact the Cisco Technical Assistance Center (TAC) to request reprovisioning of the license file for the new licensing MAC address.


Procedure


Step 1 Sign in to the CLI of the Application Server as the mpxadmin user.

Step 2 Enter su - to switch to the root user.

Step 3 Enter net at the prompt to start the Network Configuration Utility.

Step 4 Enter y at the prompt to continue.

Step 5 Select 2 to `Configure Ethernet'.

Step 6 Select 4 to `Set basic IP parameters'.

Step 7 Enter new values for the IP address or skip to Step 9 to change the hostname.

a. (Optional) Enter a new value for the network mask.

b. (Optional) Enter a new value for the default gateway, or enter None if there is no default gateway.

Step 8 Select 8 to return to the main menu.

Step 9 Select 3 to `Set host name'.

Step 10 Enter a new host name at the prompt.


Note Make sure you have a DNS table entry for the new host name.


Step 11 Select 7 `Done'.

Step 12 Enter y at the prompt to save your changes.

Step 13 Enter reboot to reboot the Application Server.


Related Topics

Audio-only Deployment - Changing the IP Address or Hostname for a Web Server and an Application Server

Changing the Domain Name of the Application Server

Failover Deployment - Changing the IP Address or Hostname for a Web Server and an Application Server

Multinode Deployment - Changing the IP Address or Host Name for a Web Server and an Application Server

Web Server with Segmented Meeting Access - Changing the IP Address or Hostname

Changing the Domain Name of the Application Server

This procedure is completed on the Cisco Unified MeetingPlace Application Server.

Procedure


Step 1 Sign in to the CLI of the Application Server as the mpxadmin user.

Step 2 Enter su - to switch to the root user.

Step 3 Enter net at the prompt to start the Network Configuration Utility.

Step 4 Enter y at the prompt to continue.

Step 5 Select 4 to `Set domain name'.

Step 6 Enter a new domain name at the prompt.

Step 7 Select 7 `Done'.

Step 8 Enter y at the prompt to save your changes.

Step 9 Enter reboot to reboot the Application Server.


Related Topics

Audio-only Deployment - Changing the IP Address or Hostname for a Web Server and an Application Server

Changing the IP Address for a Domain Name Server or a Network Time Protocol Server

Failover Deployment - Changing the IP Address or Hostname for a Web Server and an Application Server

Multinode Deployment - Changing the IP Address or Host Name for a Web Server and an Application Server

Web Server with Segmented Meeting Access - Changing the IP Address or Hostname

Changing the IP Address for a Domain Name Server or a Network Time Protocol Server

Complete this procedure on the Cisco Unified MeetingPlace Web Server.

Procedure


Step 1 Sign in to the CLI of the Application Server as the mpxadmin user.

Step 2 Enter su - to switch to the root user.

Step 3 Enter net at the prompt to start the Network Configuration Utility.

Step 4 Enter y at the prompt to continue.

Step 5 Select 5 to `Configure DNS service'.


Note You can change the IP address for up to three domain name servers.


Step 6 Enter a new domain name server IP address at the prompt.

Step 7 Select 6 to `Configure NTP service'.


Note You can change the IP address for up to three network time protocol servers.


Step 8 Enter a new network time protocol server IP address at the prompt.

Step 9 Select 7 `Done'.

Step 10 Enter y at the prompt to save your changes.

Step 11 Enter reboot to reboot the Application Server.


Related Topics

Audio-only Deployment - Changing the IP Address or Hostname for a Web Server and an Application Server

Updating DNS Entries

Multinode Deployment - Changing the IP Address or Host Name for a Web Server and an Application Server

Failover Deployment - Changing the IP Address or Hostname for a Web Server and an Application Server

Web Server with Segmented Meeting Access - Changing the IP Address or Hostname

Updating DNS Entries

When you change an IP address or host name for an Application Server or a Web Server, you should update the appropriate DNS entries on your Domain Name Server and Cisco Unified CallManager Express.

Procedure


Step 1 Access your Domain Name Server.

Step 2 Change the DNS entry for the Application Server to match the address you entered in "Changing the IP Address or Hostname of the Application Server" section.

Step 3 Change the DNS entry for the Web Server to match the address you entered in "Changing the Domain Name of the Application Server" section.

Step 4 Access your Cisco Unified Communications Manager and change the SIP trunk configuration for the Application Server. See Setting Up a Cisco Unified Communications Manager 8.x and 9.x SIP Trunk Integration with Cisco Unity Connection for more details.


Related Topics

Audio-only Deployment - Changing the IP Address or Hostname for a Web Server and an Application Server

Re-establishing a Connection to an Application Server

Failover Deployment - Changing the IP Address or Hostname for a Web Server and an Application Server

Multinode Deployment - Changing the IP Address or Host Name for a Web Server and an Application Server

Web Server with Segmented Meeting Access - Changing the IP Address or Hostname

Re-establishing a Connection to an Application Server

After changing IP parameters, you should re-establish the connection between the Web Server and the Application Server.

Procedure


Step 1 Sign in to the Web Server.

Step 2 Choose Start > Programs > Cisco Unified MeetingPlace Configuration > Cisco Unified MeetingPlace Gateway Configuration to open the Cisco Unified MeetingPlace Gateways Configuration utility.

Step 3 Select the Gateway SIM tab.

Step 4 Select Add.

The MeetingPlace Server Entry window displays.

Step 5 Enter the new configuration information as follows:

Parameter
Action

Server Name

Enter the hostname of the Cisco Unified MeetingPlace Application Server.

Note If you use an IP address instead of a hostname for the Application Server, you will have to update the IP address on the Web Server whenever you change the IP address on the Application Server.

Shadow Server

Leave this field as is.

Client IP Address

Enter the IP address of the computer on which the Gateway SIM is installed.

Transfer Destination

Leave this field as is.

Link Encryption Disabled

Leave this box unchecked to maintain encrypted communications between the Gateway SIM and the Application Server.

Encryption uses a 56-bit DES algorithm with a secret key.


Step 6 Select OK.

Step 7 Select OK again.

Step 8 Restart the Gateway SIM service and the Cisco Unified MeetingPlace Web Master Service.

If other Web Servers share the database with the server, restart the services on those servers as well.

Step 9 Update the Web Server's hostnames and IP addresses.

a. Sign in to the web user portal.

b. Select Admin > Web Server.

c. From the View section, select the name of the Web Server you want to update.

This populates the Edit section of the page with the pre-defined settings.

d. Update the IP address or hostname for the Hostname [Home Page] and the Hostname [Web Conferencing].

e. Select Submit.

f. Restart the Cisco Unified MeetingPlace Web Master Service.

Step 10 Update the Click-to-Attend link.

a. Sign in to the Administration Center.

b. Select System Configuration > Usage Configuration.

c. In the Click-to-Attend Link Configuration section, update the Web Server hostname entries.

d. Select Save.


What to Do Next

Sign in a root user and restart the Application Server by entering the mpx_sys restart command.

Related Topics

Audio-only Deployment - Changing the IP Address or Hostname for a Web Server and an Application Server

Failover Deployment - Changing the IP Address or Hostname for a Web Server and an Application Server

Multinode Deployment - Changing the IP Address or Host Name for a Web Server and an Application Server

Web Server with Segmented Meeting Access - Changing the IP Address or Hostname

Failover Deployment - Changing the IP Address or Hostname for a Web Server and an Application Server


Note This table includes links to sections within this chapter. Each of these sections provides detailed information on the specific task. After you complete each task, return to this table to complete the next task.


Task
Description
For details, see

Step 1 

Tear down replication between the primary and secondary Application Server. Then switch the primary Application Server to Single Server mode.

Switching the Primary Server to Single Server Mode

Step 2 

Change the hostname and IP address using the net command.

Changing the IP Address or Hostname of the Application Server

Step 3 

Switch the secondary Application Server to Single Server mode.

Switching the Secondary Server to Single Server Mode

Step 4 

Initialize replication on the primary and secondary Application Servers.

Initialize Replication on the Primary and Secondary Application Servers

Related Topics

Audio-only Deployment - Changing the IP Address or Hostname for a Web Server and an Application Server

Switching the Primary Server to Single Server Mode

Multinode Deployment - Changing the IP Address or Host Name for a Web Server and an Application Server

Web Server with Segmented Meeting Access - Changing the IP Address or Hostname

Switching the Primary Server to Single Server Mode

Complete this procedure to tear down replication and switch the primary server to Single Server mode.

Procedure


Step 1 While the primary Application Server is active, tear down replication.

a. Sign in to the CLI of the primary (active) server as the mpxadmin user. If you are signing in remotely, use the eth0:0 IP address or hostname.

b. Enter su - to switch to the root user.

c. On node 1 (active server), switch off replication between the two Application Servers by entering mp_replication switchOFF -r node_2_eth0:0, where node_2_eth0:0 is the eth0:0 address for node 2.

For Release 7.0, Release 8.0, and Release 8.0 MR1, enter mp_replication switchOFF [-v] on node 1.

d. On node 1 (active server), tear down the replication setup with the remote Application Server by entering mp_replication teardown -r node_2_eth0:0, where node_2_eth0:0 is the eth0:0 address for node 2.

For Release 7.0, Release 8.0, and Release 8.0 MR1, enter mp_replication teardown [-v] on node 1.

Step 2 On node 1, enter failover setDeployment singleServer to switch the primary server to single server mode.


Related Topics

Failover Deployment - Changing the IP Address or Hostname for a Web Server and an Application Server

Changing the IP Address or Hostname of the Application Server

Switching the Secondary Server to Single Server Mode

Complete this procedure on the Application Server to place the primary server in failover standby mode and the secondary server in failover active mode.

Procedure


Step 1 Enter failoverUtil setDeployment failover on the primary server (node 1).

Step 2 On the secondary server (node 2), enter failoverUtil SetServer active.

Node 2 is now the active Application Server and node 1 is the standby Application Server.

Step 3 On node 2, enter mp_replication teardown -r node_1_eth0:0, where node_1_eth0:0 is the eth0:0 address for node 1.

For Release 7.0, Release 8.0, and Release 8.0 MR1, enter mp_replication teardown [-v] on node 1.

Step 4 On node 2, enter failoverUtil setDeployment singleServer to switch the secondary server to singleServer mode.

Step 5 Change the IP address or hostname of Eth0:0 (or other network parameters using the net command. See "Changing the IP Address or Hostname of the Application Server" section.


Related Topics

Initialize Replication on the Primary and Secondary Application Servers

Failover Deployment - Changing the IP Address or Hostname for a Web Server and an Application Server

Initialize Replication on the Primary and Secondary Application Servers

Complete this procedure on the Application Servers to initialize replication on the primary and secondary servers, and return the primary server to failover active mode.

Procedure


Step 1 On node 2, enter failoverUtil setDeployment failover to switch the secondary server to failover (standby) mode.


Note At this point, both the primary and secondary Application Servers are in failover (standby) mode.


Step 2 On the secondary server (node 2), initialize replication.

a. Sign in to the CLI of the secondary (node 2) server as the mpxadmin user. If you are signing in remotely, use the eth0:0 IP address or hostname.

b. Enter su - to switch to the root user.

c. On node 2 (secondary server) enter mp_replication init -n 2 -r <node1-eth0:0 -hostname>[-v] to initialize database replication.

For Release 7.0, Release 8.0, and Release 8.0 MR1, enter mp_replication init[-v] on node 2.

Step 3 On the primary server (node 1), initialize replication.

a. Sign in to the CLI of the primary (node 1). If you are signing in remotely, use the eth0:0 IP address or hostname.

b. On node 1 (primary server) enter mp_replication init -n 1 -r <node2-eth0:0 -hostname>[-v] to initialize database replication.

For Release 7.0, Release 8.0, and Release 8.0 MR1, enter mp_replication init[-v] on node 1.

Step 4 On the primary server (node 1), enter mp_replication switchON to switch ON replication.

For Release 7.0, Release 8.0, and Release 8.0 MR1, enter mp_replication switchON[-v] on node 1.

Step 5 Enter failoverUtil setServer active on node 1 (primary server) to switch to active mode.

The primary Application Server (node 1) is in the active mode and the secondary Application Server is in standby mode.

Related Topics

Audio-only Deployment - Changing the IP Address or Hostname for a Web Server and an Application Server

Failover Deployment - Changing the IP Address or Hostname for a Web Server and an Application Server

Multinode Deployment - Changing the IP Address or Host Name for a Web Server and an Application Server

Web Server with Segmented Meeting Access - Changing the IP Address or Hostname

Multinode Deployment - Changing the IP Address or Host Name for a Web Server and an Application Server


Note This table includes links to sections within this chapter. Each of these sections provides detailed information on the specific task. After you complete each task, return to this table to complete the next task.


Task
Description
For details, see

Step 1 

Before you change the hostname or an IP address of a Application Server in a multinode deployment, you must remove the server from the multinode deployment and place it in standby mode.

 

Step 2 

On the Application Server you can change the hostname and IP address using the net command.

Changing the IP Address or Hostname of the Application Server

Step 3 

You can change the domain name of the Application Server using the net command.

Changing the Domain Name of the Application Server

Step 4 

On the Cisco Unified MeetingPlace Web Server, you can change the IP address for the Domain Name Server or a Network Time Protocol Server.

Changing the IP Address for a Domain Name Server or a Network Time Protocol Server

Step 5 

You can update your Domain Name Server and Cisco Unified Call Manager with the new hostname and IP address of Application Server and Cisco Unified MeetingPlace Web Server.

Updating DNS Entries

Step 6 

After your system is up and running, add the Application Server back as part of the multinode deployment.

 

Step 7 

If you have multiple Cisco WebEx Node for MCS in your deployment, and you have changed the Hostname or the IP address of your Primary or Secondary MBD, you'll need to reflect these changes at your Cisco WebEx Nodes.

Entering Updated Hostnames and IP Addresses on Cisco WebEx Node for MCS

Step 8 

If you do not have a Cisco WebEx Node for MCS as part of your deployment, you need to update the Cisco WebEx site with the changed hostname or IP address.

Updating the Cisco WebEx Site

Related Topics

Audio-only Deployment - Changing the IP Address or Hostname for a Web Server and an Application Server

Failover Deployment - Changing the IP Address or Hostname for a Web Server and an Application Server

Web Server with Segmented Meeting Access - Changing the IP Address or Hostname

Entering Updated Hostnames and IP Addresses on Cisco WebEx Node for MCS

Complete this procedure on each Cisco WebEx Node for MCS in your deployment.


Note Contact the administrator of the Cisco WebEx Node Management System if you want to change the hostname or IP address of a Cisco WebEx Node for MCS. This type of change must be updated on the Cisco WebEx Node Management System, and the Cisco WebEx Node must be reconfigured with new parameters.


Procedure


Step 1 Sign in to the CLI of each Cisco WebEx Node for MCS as the mpxadmin user.

Step 2 Enter service webex stop and wait until all services have stopped.

Step 3 Enter set webex mbd Primary Meeting Director hostname,Secondary Meeting Director hostname.


Note When you enter the Primary and Secondary Meeting Director node hostnames or IP addresses, make sure you enter a comma with no space between the two node names.


Step 4 Enter service webex start and to start the services.


Related Topics

Multinode Deployment - Changing the IP Address or Host Name for a Web Server and an Application Server

Updating the Cisco WebEx Site

Complete this procedure on the active Meeting Director Broker (MBD) node.


Note Cisco Unified MeetingPlace does not automatically update hostname and IP address information on the Cisco WebEx site.


Procedure


Step 1 To update hostnames and IP addresses on the Cisco WebEx site, go to Cisco WebEx Configuration > Cisco WebEx Site Configuration page.

Step 2 Select Configure WebEx.


Related Topics

Multinode Deployment - Changing the IP Address or Host Name for a Web Server and an Application Server

Audio-only Deployment - Changing the IP Address or Hostname for a Web Server and an Application Server

Failover Deployment - Changing the IP Address or Hostname for a Web Server and an Application Server

Web Server with Segmented Meeting Access - Changing the IP Address or Hostname

Web Server with Segmented Meeting Access - Changing the IP Address or Hostname


Note This table includes links to sections within this chapter. Each of these sections provides detailed information on the specific task. After you complete each task, return to this table to complete the next task.


Task
Description
For details, see

Step 1 

If SSL is installed and turned on, disable SSL on the internal and external Web Servers.

Turning Off SSL on Internal and External Cisco Unified MeetingPlace Web Servers

Step 2 

Disable SMA on the Web Server before you change an IP address or hostname for an Application Server.

Turning Off SMA for Cisco Unified MeetingPlace Web Server

Step 3 

On the Application Server you can change the hostname and IP address using the net command.

Changing the IP Address or Hostname of the Application Server

Step 4 

You can change the domain name of the Application Server using the net command.

Changing the Domain Name of the Application Server

Step 5 

On the Cisco Unified MeetingPlace Web Server, you can change the IP address for the Domain Name Server or a Network Time Protocol Server.

Changing the IP Address for a Domain Name Server or a Network Time Protocol Server

Step 6 

You can update your Domain Name Server and Cisco Unified Call Manager with the new hostname and IP address of Application Server and Cisco Unified MeetingPlace Web Server.

Updating DNS Entries

Step 7 

Enable SMA for the Cisco Unified MeetingPlace Web Servers to the Application Server.

Turning On SMA for Cisco Unified MeetingPlace Web Server

Related Topics

Audio-only Deployment - Changing the IP Address or Hostname for a Web Server and an Application Server

Failover Deployment - Changing the IP Address or Hostname for a Web Server and an Application Server

Multinode Deployment - Changing the IP Address or Host Name for a Web Server and an Application Server

Web Server with Segmented Meeting Access - Changing the IP Address or Hostname

Turning Off SSL on Internal and External Cisco Unified MeetingPlace Web Servers

If the internal and external (DMZ) Cisco Unified MeetingPlace Web Servers have SSL configured, you must turn off SSL before you turn off SMA or change an IP address or hostname for an Application Server.


Note A certificate authority issues a certificate for a particular hostname. Therefore, when you change the hostname, the SSL certificate becomes invalid.


Procedure


Step 1 Toggle SSL to OFF on all internal Cisco Unified MeetingPlace Web Servers.

Step 2 Reboot all internal Web Servers.

Step 3 Toggle SSL to OFF on all external Web Servers.

Step 4 Reboot all external Web Servers.


Related Topics

Turning Off SMA for Cisco Unified MeetingPlace Web Server

Web Server with Segmented Meeting Access - Changing the IP Address or Hostname

Turning Off SMA for Cisco Unified MeetingPlace Web Server

You need to disable SMA on the Cisco Unified MeetingPlace Web Server before you change the IP address or hostname for the Application Server.

Prerequisite

If the internal or external (DMZ) Web Servers have SSL configured, you must turn off SSL before you turn off SMA on the Web Servers.

Procedure


Step 1 Sign in to the web user portal.

Step 2 Select Admin.

Step 3 Select Site.

Step 4 Select the underlined site name.

Step 5 For the field named "DMZ Web Server," make sure the value is set to -none-.

Step 6 Select Submit.


Related Topics

Changing the IP Address or Hostname of the Application Server

Web Server with Segmented Meeting Access - Changing the IP Address or Hostname

Turning On SMA for Cisco Unified MeetingPlace Web Server

You need to enable SMA on the Cisco Unified MeetingPlace Web Server after you change the IP address or hostname for the Application Server.

Procedure


Step 1 Sign in to the web user portal on the internal Web Server.

Step 2 Select Admin.

Step 3 Select Web Server.

Step 4 From a blank "Web Server Name" field, enter the name of a new Web Server to represent your designated external Web Server.

Step 5 Enter the fully qualified domain name (FQDN) of your external Web Server in the Hostname field as hostname.domain. If your Web Server is not in a Domain Name Server (DNS), enter the IP address instead.


Note You must be able to resolve this hostname from the internal Web Server.



Note If you are using SSL, make sure the hostname of the SSL certificate resolves to the external Web Server IP address.



Note If you are using SSL and a segmented DNS, make sure the DNS name and the SSL certificate name are different.


Step 6 Select Submit to add this Web Server to the database.


Related Topics

Audio-only Deployment - Changing the IP Address or Hostname for a Web Server and an Application Server

Multinode Deployment - Changing the IP Address or Host Name for a Web Server and an Application Server

Web Server with Segmented Meeting Access - Changing the IP Address or Hostname

Failover Deployment - Changing the IP Address or Hostname for a Web Server and an Application Server