Configuration Guide for Cisco Unified MeetingPlace Release 8.6
Configuring Flex Fields
Downloads: This chapterpdf (PDF - 68.0 KB) | Feedback

Table of Contents

Configuring Flex Fields on MeetingPlace-Scheduled and Audio-Only Systems

Configuring Flex Fields on MeetingPlace-Scheduled and Audio-Only Systems

You can define custom fields for meetings, user profiles, and user groups. Use these flex fields to track site- or organization-specific information by meeting or user.

You can set the Protection level to control which flex fields appear in or can be modified from the Cisco Unified MeetingPlace web user portal.


Table 1 Default Flex Field Values

Type of Flex Field
Default Value of Flex Field






Jan 01 1970




  • Flex fields are not included in exported output.
  • Flex fields cannot be imported.
  • If you modify the Type of an existing flex field, the flex field value in existing user groups, user profiles, and meeting records that contain that flex field will be replaced by the default value applicable to the newly specified Type. See Table 1 .

Note The first three flex fields on Profile Flex Fields and Meeting Flex Fields cannot be set to custom drop-down list.


Step 1 Sign in to the Administration Center.

Step 2 Select System Configuration > Flex Fields Configuration.

Step 3 Select one of the flex field entries.

Step 4 Configure the fields on the Edit Flex Fields Page.

Step 5 Select Save.


Related Topics