Configuration Guide for Cisco Unified MeetingPlace Release 8.5
Raw Data Export and Import Specifications
Downloads: This chapterpdf (PDF - 271.0KB) | Feedback

Raw Data Export and Import Specifications for Cisco Unified MeetingPlace

Table Of Contents

Raw Data Export and Import Specifications for Cisco Unified MeetingPlace

User Groups—Raw Data Export and Import Specifications

User Profiles—Raw Data Export and Import Specifications

Video Terminal Profiles—Raw Data Export and Import Specifications

Meetings—Raw Data Export and Import Specifications

Outgoing Calls Information—Raw Data Export Specifications

Meeting Participant Information—Raw Data Export Specifications

Meeting Participant Join Leave Information—Raw Data Export Specifications

Scheduling Failures Information—Raw Data Export Specifications

Scheduling Statistics Information—Raw Data Export Specifications

Scheduling Activity By User Information—Raw Data Export Specifications

Continuous Meetings Information—Raw Data Export Specifications


Raw Data Export and Import Specifications for Cisco Unified MeetingPlace


Release 8.5
Revised: September 19, 2011 3:26 pm

Use these specifications when importing data to Cisco Unified MeetingPlace or exporting data from Cisco Unified MeetingPlace to a spreadsheet or database program:

User Groups—Raw Data Export and Import Specifications

User Profiles—Raw Data Export and Import Specifications

Video Terminal Profiles—Raw Data Export and Import Specifications

Meetings—Raw Data Export and Import Specifications

Outgoing Calls Information—Raw Data Export Specifications

Meeting Participant Information—Raw Data Export Specifications

Meeting Participant Join Leave Information—Raw Data Export Specifications

Scheduling Failures Information—Raw Data Export Specifications

Scheduling Statistics Information—Raw Data Export Specifications

Scheduling Activity By User Information—Raw Data Export Specifications

Continuous Meetings Information—Raw Data Export Specifications

User Groups—Raw Data Export and Import Specifications


Note The first line in the export file specifies the Cisco Unified MeetingPlace version. If you want to import this file or use this file as a template for importing data, you must not modify this line.


Table 1 Import and Export Data Specifications for User Groups 

Field Name
Description
Size and Type of Value

ContactID

See Username of delegate.

1 to 30 alphanumeric characters

tzcode

See Time zone.

Import requirements:

The integer value in the import file must match a value defined by Cisco Unified MeetingPlace. Make sure you use a previously exported value.

If the import file contains the tzcode header field, all user groups in the import file must have a valid entry for the field. For any invalid or blank tzcode values, the associated user group is not imported, and an error is logged.

0 to 17 ASCII text characters

BillCode

See Billing code.

0 to 17 alphanumeric characters

grpnum

See Number.

Import requirement: This field is required in the import file whether you are adding or deleting user groups by import.

1 to 17 alphanumeric characters

Name

See Name.

Import requirement: This field is required in the import file whether you are adding or deleting user groups by import.

1 to 17 alphanumeric characters

IsActive

See User status.

Yes/No

IsAdvancedPrompts

Not supported.

Import requirement: Do not modify this field from the exported value. If you import a new group, enter 0.

CanOutdial

See Can dial out (does not apply to Cisco WebEx meetings).

Yes/No

NamedDisconnect

See Departure announcement.

Beep only/Beep + name/Silent

NamedIntroduction

See Entry announcement.

Beep only/Beep + name/Silent

PasswordRequired

See Meeting password required.

Yes/No

ScreenedIntroduction

See Screened entry.

Yes/No

RecordMeetings

See Can record meetings.

Yes/No

QuickMtgEntryAllowed

Not supported.

Import requirement: Do not modify this field from the exported value. If you import a new group, enter No.

PasswordRequiredOnOD

Not supported.

MeetingRestriction

See Who can attend.

Anyone/Users/Invited Users/None

CanRecordMeetings

See Can record meetings.

Import restriction: If you set this to No, the following fields are also set to No during the import process:

RecordMeetings ()

autostrtrcrd (Auto-start recording)

Yes/No

MtgNoteRestriction

See Who can access.

Anyone/Users/Invited Users/None

ODXLatTableNum

Not supported.

Import requirement: Do not modify this field from the exported value. If you import a new group, enter 0.

MaximumMeetingLength

See Maximum meeting length (minutes).

Import restriction: This cannot exceed the value of the Maximum meeting length (minutes) field on the Meeting Configuration Page.

Numeric—range is 0 to 1440

MaxVUIODsPerMtg

See Maximum phone dial-out attempts per meeting.

Numeric—range is 0 to 500

10000 (unrestricted)

nondidpgrnum

See Phone number for non-direct-dial pagers.

0 to 32 characters of the following types:

numeric

()-

space ( )

faxnum

Not supported.

Import requirement: Do not modify this field from the exported value. If you import a new group, leave this field blank.

maxattsprmtg

Not supported.

rcvnotifs

See Can receive notifications.

Yes/No

site

Not supported.

Import requirement: Do not modify this field from the exported value. If you import a new group, enter 0.

attndprf

Not supported.

Import requirement: Do not modify this field from the exported value. If you import a new group, enter UserCallsIn.

prmrynotifprf

Not supported.

Import requirement: Do not modify this field from the exported value. If you import a new group, enter EMail.

altnotifprf

Not supported.

Import requirement: Do not modify this field from the exported value. If you import a new group, enter Unknown_NotPref_Type.

pgrtype

Not supported.

Import requirement: Do not modify this field from the exported value. If you import a new group, enter DIDPager.

emailtype

See Email type and format, which combines the emailtype and EmailFormat fields.

Note The emailtype value determines which options are supported in the EmailFormat field.

SMTP/Exchange/LotusNotes

faxxlattablenum

Not supported.

Import requirement: Do not modify this field from the exported value. If you import a new group, enter 0.

sndnotifs

See Can send notifications.

Yes/No

autodistatts

Not supported.

dfltnotifprio

Not supported.

Import requirement: Do not modify this field from the exported value. If you import a new group, enter Normal.

sndnotifonmtgch

See Send if meeting changes.

Yes/No

sndinvlstwnotif

See Include invitee list when scheduled from web.

Yes/No

sndmtgpwdwnotif

See Include meeting password.

Yes/No

rcvattswnotif

Not supported.

playattlstfifo

Not supported.

Import requirement: Do not modify this field from the exported value. If you import a new group, enter Yes.

schedprefunitonly

Not supported.

Import requirement: Do not modify this field from the exported value. If you import a new group, enter No.

autostrtrcrd

See Auto-start recording.

Yes/No

schedhomesiteonly

Not supported.

Import requirement: Do not modify this field from the exported value. If you import a new group, enter Yes.

concurrentquestions

Not supported.

Import requirement: Do not modify this field from the exported value. If you import a new group, enter 0.

announceqarr

Not supported.

Import requirement: Do not modify this field from the exported value. If you import a new group, enter Beep + name.

announceqdep

Not supported.

Import requirement: Do not modify this field from the exported value. If you import a new group, enter Beep + name.

fqnadisabled

Not supported.

Import requirement: Do not modify this field from the exported value. If you import a new group, enter No.

ftellpartpos

Not supported.

Import requirement: Do not modify this field from the exported value. If you import a new group, enter No.

fadvanceinfo

Not supported.

Import requirement: Do not modify this field from the exported value. If you import a new group, enter No.

fautoproenabled

Not supported.

Import requirement: Do not modify this field from the exported value. If you import a new group, enter No.

fstartpeopleinwr

Not supported.

Import requirement: Do not modify this field from the exported value. If you import a new group, enter admitaslisteners.

publiculallowed

Not supported.

Import requirement: Do not modify this field from the exported value. If you import a new group, enter 10.

groupulallowed

privateulallowed

Not supported.

Import requirement: Do not modify this field from the exported value. If you import a new group, enter 0.

meetingcategory

See Default meeting category.

Up to 20 alphanumeric characters

numdataparts

chatclienttype

Not supported.

Import requirement: Do not modify this field from the exported value. If you import a new group, enter 0.

fallowdataconf

Not supported.

Import requirement: Do not modify this field from the exported value. If you import a new group, enter No.

fchatsession

fismtgseminartype

Not supported.

Import requirement: Do not modify this field from the exported value. If you import a new group, enter No.

fallowguestview

See Show meetings in public listing.

Yes/No

qnanotify

Not supported.

Import requirement: Do not modify this field from the exported value. If you import a new group, enter No.

fCanInviteRemoteServers

canallowguestoutdial

allowguestoutdial

Not supported.

Import requirement: Do not modify this field from the exported value. If you import a new group, enter No.

VLanguage

See Language.

0 to 128 alphanumeric characters

fEndMtgWarn

fMtgExtendPrompts

Not supported.

Import requirement: Do not modify this field from the exported value. If you import a new group, enter No.

SSI_SystemID

SSI_RollMapID

SSI_SiteID

Not supported.

Import requirement: Do not modify this field from the exported value. If you import a new group, enter 0.

CanChangeMtgID

See Can change meeting ID via phone.

Yes/No

RsvnlessCnfg

See Use reservationless.

0—Yes

1—No

AllowVideoSched

Not supported.

Import requirement: Do not modify this field from the exported value. If you import a new group, enter No.

AllowInternetAccess

See Allow Internet access.

Yes/No

VideoEndPtBandwidth

Not supported.

Import requirement: Do not modify this field from the exported value. If you import a new group, enter 384K.

EmailFormat

See Email type and format, which combines the emailtype and EmailFormat fields.

Only the following combinations of emailtype and EmailFormat fields are supported:

SMTP/html

SMTP/txt

LotusNotes/txt

Exchange/html

Exchange/txt

txt/html/RTF

ReserveVoiceLicenses

Not supported.

Import requirement: Do not modify this field from the exported value. If you import a new group, enter Yes.

CanReserveVideoPorts

Not supported.

Import requirement: Do not modify this field from the exported value. If you import a new group, enter No.

PreferVideo

Not supported.

Import requirement: Do not modify this field from the exported value. If you import a new group, enter Yes.

FRsvnAllowGuestView

See Show reservationless meetings in public listing.

Yes/No

attendMode

See Auto attend mode.

0—None

1—Automatically join meeting

2—Automatically sign in

attendPasswdRequired

See Auto attend requires profile PIN.

Yes/No

videoTypes

Not supported.

Import requirement: Do not modify this field from the exported value. If you import a new group, enter 0.

mtgEntryMode

See Meeting entry mode.

0—Echo meeting

1—Skip ID repeat

3—Skip ID repeat and skip names

dataConfClientType

Not supported.

Import requirement: Do not modify this field from the exported value. If you import a new group, enter 1.


Related Topics

Exporting User Groups in the Exporting Data from Cisco Unified MeetingPlace and Running Reports module

Adding or Editing User Groups by Import in the Importing Data into Cisco Unified MeetingPlace module

Deleting User Groups by Import in the Importing Data into Cisco Unified MeetingPlace module

User Profiles—Raw Data Export and Import Specifications


Note The first line in the export file specifies the Cisco Unified MeetingPlace version. If you want to import this file or use this file as a template for importing data, you must not modify this line.


Table 2 Import and Export Data Specifications for User Profiles 

Field Name
Description
Size and Type of Value

fnm

See First name.

0 to 32 alphanumeric characters

lnm

See Last name.

0 to 32 alphanumeric characters

uid

See Username.

Import requirement: This field is required whether you are adding or deleting user profiles by import.

1 to 30 alphanumeric characters

prfnum

See Profile number.

Import requirement: This field is required whether you are adding or deleting user profiles by import.

1 to 32 numeric characters

phnum

See Main phone number.

0 to 32 alphanumeric characters

ctctuid

See Username of delegate.

Import requirement: If not set to gd1 , the value must match one of the following:

Username in the Cisco Unified MeetingPlace database

uid in the import file

Restriction: The specified user must be of type Delegate.

1 to 30 alphanumeric characters

grpnme

See Group name.

Import requirement: If the import file contains the grpnme header field, all user profiles in the import file must have a valid entry for this field. For details, see "Adding or Editing User Profiles by Import" in the Importing Data into Cisco Unified MeetingPlace module.

1 to 17 alphanumeric characters

grpnum

See Number.

Import requirement: If the import file contains the grpnum header field, all user profiles in the import file must have a valid entry for this field. For details, see "Adding or Editing User Profiles by Import" in the Importing Data into Cisco Unified MeetingPlace module.

0 to 17 numeric characters

tzcode

See Time zone.

Import requirements:

The integer value in the import file must match a value defined by Cisco Unified MeetingPlace. Make sure you use a previously exported value.

If the import file contains the tzcode header field, all user profiles in the import file must have a valid entry for the field. For any invalid or blank tzcode values, the associated user profile is not imported, and an error is logged.

0 to 17 ASCII text characters

abbprmpts

Not supported.

Import requirement: Do not modify this field from the exported value. If you import a new profile, enter gd.

anndpart

See Departure announcement.

Beep+ name/Beep only/
Silent/gd

annentry

See Entry announcement.

Beep+ name/Beep only/
Silent/gd

pwdreq

See Meeting password required.

Yes/No/gd

screntry

See Screened entry.

Yes/No/gd

bcode

See Billing code.

0 to 17 alphanumeric characters

uactive

See User status.

Yes/No/gd/Locked

utype

See Type of user.

EndUser/Delegate/
Attendant/SysMgr

cndial

See Can dial out (does not apply to Cisco WebEx meetings).

Yes/No/gd

shrtmnus

Not supported.

Import requirement: Do not modify this field from the exported value. If you import a new profile, enter gd.

pwdonoutdial

Not supported.

Import requirement: Do not modify this field from the exported value. If you import a new profile, enter gd.

whocanattnd

See Who can attend.

Anyone/Users/
Invited Users/None

whocanlstn

Not supported.

Import requirement: Do not modify this field from the exported value. If you import a new profile, enter gd.

canrecord

See Can record meetings.

Yes/No/gd

recordmtgs

Not supported.

Import requirement: Do not modify this field from the exported value. If you import a new profile, enter gd.

WFPasswordLastChanged

Display only. When the User password was last changed.

MM/DD/YYYY hh:mm

VUPasswordLastChanged

Display only. When the Profile PIN was last changed.

MM/DD/YYYY hh:mm

ODXLatTableNum

Not supported.

Import requirement: Do not modify this field from the exported value. If you import a new profile, enter gd.

DayOfLastImmedMtg

Display only. The date and time of the last immediate meeting that this user scheduled.

MM/DD/YYYY hh:mm

NumImmedMtgsOnThatDay

Not supported.

Import requirement: Do not modify this field from the exported value. If you import a new profile, enter 0.

MaximumMeetingLength

See Maximum meeting length (minutes).

Import restriction: This cannot exceed the value of the Maximum meeting length (minutes) field on the Meeting Configuration Page.

gd/Numeric—range is 0 to 1440

MaxVUIODsPerMtg

See Maximum phone dial-out attempts per meeting.

Numeric—range is 0 to 500

10000—Unrestricted

gd

faxnum

Not supported.

Import requirement: Do not modify this field from the exported value. If you import a new profile, leave this field blank.

pgrnum

See Pager number.

0 to 32 alphanumeric characters

mxattsprmtg

Not supported.

Import requirement: Do not modify this field from the exported value. If you import a new profile, enter gd.

rcvnotifs

See Can receive notifications.

Yes/No/gd

attndprf

See Method of attending.

UserCallsIn/SysFindsUser

prmrynotifprf

altnotifprf

Not supported.

Import requirement: Do not modify this field from the exported value. If you import a new profile, enter gd.

pgrtype

See Pager type.

DIDPager/NonDIDPager

emailtype

See Email type and format, which combines the emailtype and EmailFormat fields.

Import restriction: The emailtype value determines which options are supported in the EmailFormat field.

SMTP/Exchange/LotusNotes/
gd

site

Not supported.

Import requirement: Do not modify this field from the exported value. If you import a new profile, enter gd.

emailaddr

See Email address.

0 to 128 alphanumeric characters

faxxlattblnum

Not supported.

Import requirement: Do not modify this field from the exported value. If you import a new profile, enter gd.

sndnotifs

See Can send notifications.

Yes/No/gd

autodistatts

Not supported.

Import requirement: Do not modify this field from the exported value. If you import a new profile, enter No.

dfltnotifprio

See Priority.

Low/Normal/Urgent/gd

sndnotifonmtgch

See Send if meeting changes.

Yes/No/gd

sndinvlstwnotif

See Include invitee list when scheduled from web.

Yes/No/gd

sndmtgpwdwnotif

See Include meeting password.

Yes/No/gd

rcvattswnotif

Not supported.

Import requirement: Do not modify this field from the exported value. If you import a new profile, enter gd.

playattlstfifo

schedprefunitonly

Not supported.

Import requirement: Do not modify this field from the exported value. If you import a new profile, enter gd.

autostrtrcrd

See Auto-start recording.

Yes/No/gd

schedhomesiteonly

Not supported.

Import requirement: Do not modify this field from the exported value. If you import a new profile, enter gd.

concurrentquestions

Not supported.

Import requirement: Do not modify this field from the exported value. If you import a new profile, enter 0.

announceqarr

Not supported.

Import requirement: Do not modify this field from the exported value. If you import a new group, enter gd.

announceqdep

Not supported.

Import requirement: Do not modify this field from the exported value. If you import a new profile, enter gd.

fqnadisabled

Not supported.

Import requirement: Do not modify this field from the exported value. If you import a new profile, enter gd.

ftellpartpos

Not supported.

Import requirement: Do not modify this field from the exported value. If you import a new profile, enter gd.

fadvanceinfo

Not supported.

Import requirement: Do not modify this field from the exported value. If you import a new profile, enter gd.

fautoproenabled

Not supported.

Import requirement: Do not modify this field from the exported value. If you import a new profile, enter gd.

fstartpeopleinwr

Not supported.

Import requirement: Do not modify this field from the exported value. If you import a new group, enter gd.

publiculallowed

groupulallowed

privateulallowed

Not supported.

Import requirement: Do not modify this field from the exported value. If you import a new profile, enter gd.

meetingcategory

See Default meeting category.

0 to 20 alphanumeric characters/gd

numdataparts

chatclienttype

Not supported.

Import requirement: Do not modify this field from the exported value. If you import a new profile, enter gd.

fallowdataconf

Not supported.

Import requirement: Do not modify this field from the exported value. If you import a new profile, enter gd.

fchatsession

fismtgseminartype

Not supported.

Import requirement: Do not modify this field from the exported value. If you import a new profile, enter gd.

fallowguestview

See Show meetings in public listing.

Yes/No/gd

qnanotify

Not supported.

Import requirement: Do not modify this field from the exported value. If you import a new profile, enter gd.

InternetEmailAddr

Not supported.

Import requirement: Do not modify this field from the exported value. If you import a new profile, leave this field blank.

EncryptedUserPWD

or

upwd

The exported EncryptedUserPWD field is the encrypted User password.

When importing a user profile:

Use the EncryptedUserPWD field to import a previously encrypted user password.

Use the import-only upwd field to import an unencrypted user password.

Import requirements:

The import file must contain the EncryptedUserPWD field or the upwd field. If both fields are included in the import file, one must be left blank in each user profile.

If the isLocalUser field is set to No, both the EncryptedUserPWD and upwd fields must be left blank.

Import restrictions:

Unicode is not supported.

If the user is authenticated by an external directory, you cannot modify the User password through Cisco Unified MeetingPlace.

See "External AXL Authentication for Directory Service Users" in the Configuring Cisco Unified MeetingPlace Directory Service on MeetingPlace-Scheduled and Audio-Only Deployments module.

blank (no password; externally authenticated)

5 to 45 alphanumeric characters

EncryptedProfilePWD

or

prfpwd

The exported EncryptedProfilePWD field is the encrypted Profile PIN.

When importing a user profile:

Use the EncryptedProfilePWD field to import a previously imported profile PIN.

Use the import-only prfpwd field to import an unencrypted profile PIN.

Import requirements:

The import file must contain the EncryptedProfilePWD field or the prfpwd field. If both fields are included in the import file, one must be left blank in each user profile.

If the isLocalUser field is set to No, both the EncryptedProfilePWD and prfpwd fields must be left blank.

Import restrictions:

This field cannot be modified in the preconfigured Guest Profile.

If the user is authenticated by an external directory, you cannot modify the Profile PIN through Cisco Unified MeetingPlace.

See "External AXL Authentication for Directory Service Users" in the Configuring Cisco Unified MeetingPlace Directory Service on MeetingPlace-Scheduled and Audio-Only Deployments module.

blank (no password; authenticated externally)

5 to 45 alphanumeric characters

fCanInviteRemoteServers

Not supported.

Import requirement: Do not modify this field from the exported value. If you import a new profile, enter gd.

altphnum

See Alternate phone number.

0 to 32 characters of the following types:

numeric

(),-.

space ( )

1stSearch

2ndSearch

3rdSearch

See Search order for find me.

Main phone/Alternate phone/ Pager

canallowguestoutdial

allowguestoutdial

Not supported.

Import requirement: Do not modify this field from the exported value. If you import a new profile, enter gd.

VLanguage

See Language.

0 to 128 alphanumeric characters/gd

fEndMtgWarn

fMtgExtendPrompts

SSI_SystemID

SSI_RollMapID

SSI_SiteID

Not supported.

Import requirement: Do not modify this field from the exported value. If you import a new profile, enter gd.

CanChangeMtgID

See Can change meeting ID via phone.

Yes/No/gd

RsvnlessCnfg

See Use reservationless.

0—Yes

1—No

gd

RsvnlessCnfgGD

Not supported.

Import requirement: Do not modify this field from the exported value. If you import a new profile, enter 255.

AllowVideoSched

Not supported.

Import requirement: Do not modify this field from the exported value. If you import a new profile, enter gd.

AllowInternetAccess

See Allow Internet access.

Yes/No/gd

VideoEndPtBandwidth

Not supported.

Import requirement: Do not modify this field from the exported value. If you import a new profile, enter gd.

bountyUser

Not supported.

Import requirement: Do not modify this field from the exported value. If you import a new profile, enter TRUE.

isLocalUser

Whether the user profile is for a Directory Service user. Also determines the user authentication method:

Yes—Local authentication against the Cisco Unified MeetingPlace database.

No—Directory Service user; External AXL authentication.

See "Directory Service isLocalUser Setting In User Profiles" in the Configuring Cisco Unified MeetingPlace Directory Service on MeetingPlace-Scheduled and Audio-Only Deployments module.

Restriction: This field does not appear in the Administration Center. You can view this setting only by exporting user profiles, and you can modify this field only through a manual import process.

Yes/No

EmailFormat

See Email type and format, which combines the emailtype and EmailFormat fields.

Note If you use the gd value, make sure that the EmailFormat field in the assigned user group is compatible with the emailtype field in the user profile.

Only the following combinations of emailtype and EmailFormat fields are supported:

SMTP/html

SMTP/txt

LotusNotes/txt

Exchange/html

Exchange/txt

txt/html/RTF/gd

ReserveVoiceLicenses

Not supported.

Import requirement: Do not modify this field from the exported value. If you import a new profile, enter gd.

LockedProfileTime

Time when profile was locked, in seconds, from 1/1/1970 00:00:00 GMT.2

A value of 0 means that the profile is not currently locked.

Import requirement: Do not modify this field from the exported value. If you import a new profile, enter 0 for this field.

Integer—range is 0 to 231 - 1

CanReserveVideoPorts

PreferVideo

Not supported.

Import requirement: Do not modify this field from the exported value. If you import a new profile, enter gd.

PreferDataConf

Not supported.

Import requirement: Do not modify this field from the exported value. If you import a new profile, enter Yes.

attendMode

See Auto attend mode.

0—None

1—Automatically join meeting

2—Automatically sign in

gd

attendPasswdRequired

See Auto attend requires profile PIN.

Yes/No/gd

videoTypes

Not supported.

Import requirement: Do not modify this field from the exported value. If you import a new profile, enter gd.

mtgEntryMode

See Meeting entry mode.

0—Echo meeting

1—Skip ID repeat

3—Skip ID repeat and skip names

gd

dataConfClientType

Not supported.

Import requirement: Do not modify this field from the exported value. If you import a new profile, enter gd.

CCMpkid

This field determines whether the user profile will be affected by the next Directory Service user profile update.

Import requirement: Do not modify this field from the exported value. If you import a new profile, leave this field blank.

Up to 40 characters

1 gd = group default

2 GMT = Greenwich Mean Time


Related Topics

Exporting User Profiles in the Exporting Data from Cisco Unified MeetingPlace and Running Reports module

Adding or Editing User Profiles by Import in the Importing Data into Cisco Unified MeetingPlace module

Deleting User Profiles by Import in the Importing Data into Cisco Unified MeetingPlace module

Video Terminal Profiles—Raw Data Export and Import Specifications

Table 3 Import and Export Data Specifications for Video Terminal Profiles 

Field Name
Description
Size and Type of Value

videoTermName

See Video terminal name.

Import requirement: This field is required when you add VTPs by import.

0 to 32 alphanumeric characters

videoTermId

Unique value that identifies the VTP in report and export output.

For VTPs that you manually add through the Administration Center, this value is automatically generated by the system.

Import requirements:

This field is required whether you are adding or deleting VTPs by import.

Do not modify this field from the exported value.

1 to 30 numeric characters

videoEndPtAddStr

See Endpoint E.164 number.

Import requirement: This field is required when you add VTPs by import.

Restriction: Only the following characters are allowed: (),-. and 0-9.

Up to 32 characters

grpnme

See Group name.

Import requirements:

This field is required whether you are adding or deleting user profiles by import.

Do not modify this field from the exported value. If you import a new VTP, enter System.

1 to 17 alphanumeric characters

grpnum

Number of user group.

Import requirement: Do not modify this field from the exported value. If you import a new VTP, enter 0 to indicate the System User Group.

0 to 17 numeric characters

emailaddr

See Email address.

0 to 128 alphanumeric characters

tzcode

Time zone of the video terminal.

Import requirements:

The integer value in the import file must match a value defined by Cisco Unified MeetingPlace. Make sure you use a previously exported value.

If the import file contains the tzcode header field, all user groups in the import file must have a valid entry for the field. For any invalid or blank tzcode values, the associated user group is not imported, and an error is logged.

0 to 17 ASCII text characters

supportSIPReInvite

See Skip meeting entry voice prompts for dial-out calls.

Yes/No

attndprf

See Method of attending.

UserCallsIn/SysFindsUser

rcvnotifs

See Can receive notifications.

Yes/No/gd1

rcvattswnotif

Not supported.

Import requirement: Do not modify this field from the exported value. If you import a new profile, enter gd.

preferedCodec

See Video terminal codec.

1—H.261

2—H.263

5—H.264

6—Use default (H.264)

1/2/5/6

1 gd = group default


Related Topics

Exporting Video Terminal Profiles in the Exporting Data from Cisco Unified MeetingPlace and Running Reports module

Adding or Editing Video Terminal Profiles by Import in the Importing Data into Cisco Unified MeetingPlace module

Deleting Video Terminal Profiles by Import in the Importing Data into Cisco Unified MeetingPlace module

Meetings—Raw Data Export and Import Specifications


Note The first line in the export file specifies the Cisco Unified MeetingPlace version. If you want to import this file or use this file as a template for importing data, you must not modify this line.


Table 4 Import and Export Data Specifications for Meetings 

Field Name
Description
Size and Type of Value

ConfNum

Unique conference number assigned to this meeting after it was successfully scheduled.

Import requirement: Must be a unique value.

1 to 9 numeric characters

StartDateTimeOfConf

The date and time for which this meeting is scheduled.

MM/DD/YYYY HH:MM

SchedulerUid

Username of the meeting owner.

Import requirement: Must be a valid Username.

0 to 17 alphanumeric characters

ContactUid

Username of delegate of the meeting owner.

Import requirement: Must be a valid Username.

0 to 17 alphanumeric characters

DialableConfID

Meeting ID.

0 to 9 ASCII text characters

LastModified

Date and time when the meeting information was last modified.

MM/DD/YYYY HH:MM

OriginallyScheduled

Date and time when this meeting was originally scheduled.

MM/DD/YYYY HH:MM

PartRecordTimeUsed

Amount of time, in seconds, of participant name recordings.

1 to 9 numeric characters

NameRecordTimeUsed

Amount of time, in seconds, of the recorded meeting name.

1 to 9 numeric characters

AgendaRecordTimeUsed

Amount of time, in seconds, of the meeting agenda recording.

1 to 9 numeric characters

VRecordRecordTimeUsed

Amount of time, in seconds, of the meeting recording.

1 to 9 numeric characters

VIntroTimeUsedSecs

Amount of time, in seconds, of the meeting introduction recording.

1 to 9 numeric characters

TName

Meeting subject.

0 to 63 alphanumeric characters

SchedulerTimeZone

Time zone of the meeting scheduler.

Import requirement: The integer value in the import file must match a value defined by Cisco Unified MeetingPlace. Make sure you use a previously exported value.

0 to 17 ASCII text characters

TAgenda

Not supported.

VName

Whether the meeting name was recorded.

Recorded/Not Recorded

VAgenda

Whether the meeting agenda was recorded.

Recorded/Not Recorded

VRecord

Whether the meeting was recorded.

Recorded/Not Recorded

VMeetingIntro

Whether the meeting introduction was recorded.

Recorded/Not Recorded

VoiceStorageEndTime

When the following items for this meeting will be deleted from the Application Server:

Voice agenda

Conference name

Meeting introduction

Voice recording

Attachment records

Recorded participant names

Voice storage reservation

This date cannot be changed, and it is set to 7 days after the meeting ends.

MM/DD/YYYY HH:MM

ActSrtTimeOfConf

When the meeting started.

MM/DD/YYYY HH:MM

Note If meeting was not attended, field displays time zero (midnight January 1, 1970 converted to server's time zone).

TotConfPortSec

Accumulated number of seconds for all voice ports that were in the meeting.

For example, if three ports were in the meeting for 5, 6, and 7 seconds, respectively, then TotConfPortSec = 5 + 6 + 7 = 18.

1 to 9 numeric characters

ActLenOfConf

Actual length of the meeting, in minutes.

1 to 9 numeric characters

nPartRegistered

Number of users that were either invited to or joined the meeting.

1 to 4 numeric characters

ActnParticipants

Number of users who attended this meeting.

1 to 4 numeric characters

PeakNumberOfParticipants

Peak number of participants in this meeting.

1 to 4 numeric characters

PeakNumberOfPorts

Peak number of voice ports used during this meeting.

1 to 4 numeric characters

OrigNumberOfPorts

Number of voice ports planned for this meeting.

1 to 4 numeric characters

nPartAttemptsAfterConfLocked

The number of participants that tried to join the meeting after it was locked.

1 to 4 numeric characters

ReqLengthOfConf

The requested number of minutes for this meeting.

1 to 4 numeric characters

nPortsRequired

The number of voice ports required for this meeting.

1 to 4 numeric characters

nPartsRequested

The number of participants invited to the meeting.

1 to 4 numeric characters

MaxDaysReOccuring

Number of instances of reoccurrence.

For example, a meeting that occurs monthly for 2 years will have a value of 12.

1 to 9 numeric characters

MeetingJoinRestriction

Who can join the meeting.

Anyone/Users/Invited Users/
None

DefaultAbility

TUI1 abilities of uninvited participants upon entering the meeting.

For information about the values, see the SpeakingAbility meeting participant information field.

Previous releases of Cisco Unified MeetingPlace supported other speaking abilities. If you import any of these old values, the system will treat them as SPEAKERPLUS.

SPEAKER/SPEAKERPLUS

ReOccuringConference

Frequency of meeting recurrence.

A value of PERMANENT refers to a continuous meeting.

ONCE/DAILY/WEEKLY/
MONTHLY/WEEKDAYS/
PERMANENT/BIWEEKLY/
MONTHLYBYDAYOFWEEK1/
MONTHLYBYDAYOFWEEK2/
MONTHLYBYDAYOFWEEK3/
MONTHLYBYDAYOFWEEK4/
MONTHLYBYDAYOFWEEKLAST/
SPECIFIEDWEEKDAYS

MtgNoteRestriction

Not supported.

fPasswordRequired

Whether the meeting requires a password.

Yes/No

fNamedIntroduction

Announcement played when participants join the meeting.

Beep/BeepName/None

fNamedDisconnect

Announcement played when participants leave the meeting.

Beep/BeepName/None

fScreenedIntroduction

Not supported.

fRecordConference

Whether this meeting is recorded.

Yes/No

fPosted

Whether the recording of this meeting is posted.

Yes/No

fQuickMtgEntryAllowed

Not supported.

fPasswordRequiredOnOD

Whether dial-out participants must enter Profile PINs before being admitted into the voice meeting.

Yes/No

nUserVUIMtgNotesAccesses

Not supported.

nUserGUIMtgNotesAccesses

Not supported.

nGuestMtgNotesAccesses

Not supported.

SchedulingClient

Not supported.

CurAttRefID

Not supported.

CurNumDataAtt

Not supported.

CurNumVoiceAtt

Not supported.

CurVoiceAttSpace

Not supported.

CurDataAttSpace

Not supported.

nVoiceAttAdded

Not supported.

nDataAttAdded

Not supported.

PeaknVoiceAtt

Not supported.

PeaknDataAtt

Not supported.

PeakAttVoiceSpace

Not supported.

PeakAttDataSpace

Not supported.

CurAttNameHeaderSpace

Not supported.

MaxAttachments

Not supported.

fBAgendaAttAvail

Not supported.

fAutoStartRecord

Whether the system automatically starts recording the meeting.

Yes/No

fDisableRollCall

Not supported.

SendNotAboutMtgs

Whether an email notification was sent when this meeting was scheduled.

Notifications are never sent for reservationless meetings.

Yes/No

AutoDistributeAtt

Not supported.

DefNotPriority

Priority given to the email notifications sent when this meeting is scheduled.

Low/Normal/Urgent

SendNotAboutMtgChngs

Whether email notifications are sent when the following meeting parameters change:

Date or time

Password

Meeting ID

List of invitees

Yes/No

SendInviteListWithNot

Whether to include a list of meeting invitees in email notifications for this meeting.

Yes/No

SendMtgPwdWithNot

Whether to include the meeting password in email notifications for this meeting.

Yes/No

fUsedBlastOutdial

Whether the system dials out to all meeting invitees.

Yes/No

BillCode

Billing code applied to this meeting.

0 to 18 alphanumeric characters

fTAgendaAttAvail

Not supported.

fVAgendaAttAvail

Not supported.

PriUnitNum

Not supported.

PriSiteNum

Not supported.

concurrentquestions

Not supported.

announceqarr

Not supported.

announceqdep

Not supported.

fqnadisabled

Not supported.

fautoproenabled

Not supported.

fstartpeopleinwr

Not supported.

numdataparts

Not supported.

fchatsession

Not supported.

fismtgseminartype

Not supported.

fallowguestview

Whether this meeting is publicly listed in the Cisco Unified MeetingPlace web user portal.

Yes/No

tottimesfgiven

Not supported.

qnanotify

Not supported.

PeakVRecordTimeUsed

Peak number of recording seconds used by a meeting over its lifetime. A historical statistic used for billing purposes.

1 to 9 numeric characters

MPConnectionType

Not supported.

nRemoteServersRegistered

Not supported.

TotnRSsInvited

Not supported.

ActnRSs

Not supported.

PeakNumberOfRSs

Not supported.

allowguestoutdial

Whether guest users can dial out from this meeting.

Yes/No

TotDCConfPortSec

Total number of seconds that the web meeting room was used by this meeting.

1 to 9 numeric characters

VLanguage

Meeting language, which is used for voice prompts that are heard by all meeting participants.

0 to 128 alphanumeric characters

EncryptedConfPwd

Encrypted meeting password.

0 to 17 alphanumeric characters

StartDateTimeOfConfGMT

Date on which the meeting is scheduled to occur.

MM/DD/YYYY

fEndMtgWarn

Whether the end-of-meeting announcement is played in this meeting.

Yes/No

fMtgExtendPrompts

Whether meeting-extension announcements are played in this meeting.

Yes/No

ActSrtTimeOfDataConf

Date and time at which the web meeting room meeting started.

Note If this is a voice-only meeting (no web meeting room), this field displays a dummy value.

MM/DD/YYYY HH:MM

ActLenOfDataConf

The actual length of the web meeting, in minutes.

1 to 9 numeric characters

ConfExtensionFailCode

Failure code that indicates why an attempted meeting extension failed. See Table 9.

If there were no attempts to extend the meeting, then this value is 0.

1 to 6 numeric characters

NumSuccConfExtensions

Number of times that the meeting was successfully extended.

1 to 9 numeric characters

MeetingType

Descriptor for meetings.

0—Scheduled

1—Reservationless

2—Reserve All Ports (RAP)

3—Not supported

4—Web only

Numeric—range is 0 to 4

RsvnlessStartID

Username of the person who initiates the reservationless meeting.

This field applies only to reservationless meetings.

0 to 17 alphanumeric characters

OutdialFirstCall

Whether the system dials out to all invitees after the first person joins the meeting.

This field applies only to continuous meetings, which can be scheduled only by system administrators.

Yes/No

nVideoPortsReq

The number of video ports required for this meeting.

Import restriction: This value cannot exceed the number of licensed ports.

1 to 4 numeric characters

ActNumVideoPorts

Number of video participants in this meeting.

1 to 4 numeric characters

TotVideoPortSecs

Total number of seconds that video endpoints were in the meeting.

For example, if three video endpoints attended the meeting for 5, 6, and 7 seconds, respectively, then TotVideoPortSec = 5 + 6 + 7 = 18.

1 to 9 numeric characters

AllowInternetAccess

Whether the meeting is accessible by anyone on the Internet and appears on the external Web Server.

Yes/No

nDCPortsRequired

Number of web ports required for this meeting to be scheduled.

Import restriction: This value cannot exceed the number of licensed ports.

1 to 4 numeric characters

meetingInvitees

List of Usernames or email addresses of meeting invitees, separated by a semicolon (;).

Example: user1;user2@example.com;user3;user4

Import restriction: The number of invitees cannot exceed the value in the Maximum ports per scheduled meeting field.

Alphanumeric characters

allowVideoConf

Whether video is enabled for this meeting.

Yes/No

external

Identical to AllowInternetAccess.

Yes/No

videoTypeId

videoTypeName

videoMinBitRate

videoMaxBitRate

videoCodec

Not supported.

OrigNvideoPorts

Number of originally scheduled video ports.

1 to 4 numeric characters

fMeetingTemplateID

Not supported.

fWebOnly

Whether participants are allowed to enter only the web meeting room (no audio participants).

Yes/No

fAllowAnyoneToView

Whether anyone can search to find this meeting through the web user portal.

If set to No, then even system administrators will not be able to see the meeting.

Yes/No

1 TUI = telephone user interface


Related Topics

Exporting Meetings in the Exporting Data from Cisco Unified MeetingPlace and Running Reports module

Scheduling Meetings by Import in the Importing Data into Cisco Unified MeetingPlace module

Canceling Meetings by Import in the Importing Data into Cisco Unified MeetingPlace module

Outgoing Calls Information—Raw Data Export Specifications

Table 5 Export Data Specifications—Outgoing Calls Information 

Field Name
Description
Size and Type of Value

StartTimeOfCall

Date and time when the system placed the call.

MM/DD/YYYY HH:MM

uid

Username of the person who initiated the dial-out call.

1 to 30 alphanumeric characters

ConfNum

See ConfNum.

1 to 9 numeric characters

nSeconds

Duration of the outgoing call, in seconds.

An unsigned integer

CalledDest

Phone number that was dialed.

No more than 32 ASCII digits

fBlastOutdial

Whether this was a blast dial-out call.

Yes/No

UpdateTime

When this record was most recently updated.

MM/DD/YY HH:MM

PartID

Unique number that identifies each meeting participant. The meeting owner is assigned the number 0. The first non-owner participant is assigned the number 1. As each participant joins, the next incremental number is assigned.

If a profiled user leaves and rejoins a meeting, the same PartID is used. If a guest user leaves and rejoins a meeting, a new PartID is used.

A PartID of -851969 indicates that the user did not actually join the meeting.

0 to 17 ASCII text characters


Related Topics

Exporting Data from Cisco Unified MeetingPlace and Running Reports module

Meeting Participant Information—Raw Data Export Specifications

Table 6 Export Data Specifications—Meeting Participant Information 

Field Name
Description
Size and Type of Value

PartId

See PartID.

0 to 17 ASCII text characters

ConfNum

See ConfNum.

1 to 9 numeric characters

uid

Username of the meeting participant.

1 to 30 alphanumeric characters

MeetingId

Meeting ID.

Numeric characters

StartTimeOfConf

Date and time when the meeting started.

MM/DD/YYYY hh:mm

nVSecInConf

Amount of time, in seconds, that the participant spent in the voice portion of the meeting.

An unsigned integer

nWFSecInConf

Not supported.

nSecsOutboundCalls

Amount of time, in seconds, that the participant spent in a call that was dialed out by the system.

An unsigned integer

VNameHeader

Whether the name of the participant was recorded.

Recorded/Not_Recorded

nOutboundCalls

Number of dial-out calls initiated by this participant

An unsigned integer

nRetries

Number of dial-out retries initiated by this participant

An unsigned integer

TNameHeader

First name and Last name of the meeting participant.

For unprofiled participants, this displays one of the following:

Name the guest user enters to join the meeting from the Cisco Unified MeetingPlace web user portal.

"Guest User" followed by the phone number or extension from which the user dials in.

0 to 64 alphanumeric characters

SpeakingAbility

TUI1 abilities of the participant upon leaving the meeting.

Upon entering the meeting, the participant has one of the following sets of abilities:

SPEAKER—Depending on user profile parameters, may be able to place dial-out calls or start recordings.

SPEAKERPLUS—In addition to the SPEAKER abilities, has meeting control, including the ability to lock the meeting and to admit or remove participants.

SPEAKER

SPEAKERPLUS

MUTED_SPEAKER

MUTED SPEAKERPLUS

nVUIODsMade

Number of dial-out calls that this participant initiated from the TUI.

An unsigned integer

nTimesQAsked

Number of times a question was asked by the participant.

An unsigned integer

nTimesFGiven

Not supported.

UpdateTime

When this record was most recently updated.

MM/DD/YYYY hh:mm

nDCSecInConf

Amount of time, in seconds, that the user spent in the web meeting room.

An unsigned integer

nSecInMTGNotes

Amount of time, in seconds, that the user spent listening to recordings and other notes for this meeting.

An unsigned integer

1 TUI = telephone user interface


Related Topics

Exporting Data from Cisco Unified MeetingPlace and Running Reports module

Meeting Participant Join Leave Information—Raw Data Export Specifications


Note This report provides a separate entry for each Device used by a meeting participant


Table 7 Export Data Specifications—Meeting Participant Join Leave Information 

Field
Description
Size and Type of Value

PartID

See PartID.

0 to 17 ASCII text characters

UserID

Username of the meeting participant.

1 to 30 alphanumeric characters

ConfNum

See ConfNum.

1 to 9 numeric characters

MeetingID

Meeting ID.

 

gmStartDate

Date on which the user joined the meeting.

MM/DD/YYYY

gmStartTime

Time at which the user joined the meeting.

HH:MM:SS AM/PM

gmEndDate

Date on which the user left the meeting.

MM/DD/YYYY

gmEndTime

Time at which the user left the meeting.

HH:MM:SS AM/PM

Device

Device identifier or port number:

0 to 1151—voice port

4080—MeetingPlace Conference Manager

4081—Web conferencing

4082—Share pod in web meeting

4084—Cisco Unified MeetingPlace Video

0 to 1151

4080 to 4084

nIncDigits

Number of DNIS digits that were received from the PBX.

An unsigned integer

IncDigits

String of DNIS digits received from the PBX.

Numerical string of up to 24 digits

AttachmentID

Not supported.

nANIDigits

Number of ANI digits that were received from the PBX.

An unsigned integer

ANIDigits

String of ANI digits received from the PBX.

Numerical string of up to 24 digits


Related Topics

Exporting Data from Cisco Unified MeetingPlace and Running Reports module

Scheduling Failures Information—Raw Data Export Specifications

Export Data Specifications—Scheduling Failures Information

Failure Code Reference: Scheduling Failures Information

Table 8 Export Data Specifications—Scheduling Failures Information 

Field
Description
Size and Type of Value

SchedulerUid

Username of the meeting owner.

1 to 30 alphanumeric characters

SchedulingTime

Date and time when the user tried to schedule the meeting.

MM/DD/YYYY hh:mm

MtgStartTime

Date and time that the user requested for the meeting to begin.

MM/DD/YYYY hh:mm

DialableConfID

Meeting ID.

0 to 9 ASCII text characters

NumOfPortsRqsted

Number of voice ports requested for the failed meeting.

An unsigned integer

MtgLenthInMin

Number of minutes that the user requested for the meeting length.

An unsigned integer

FailCode

Failure code that describes why the meeting could not be scheduled. See Table 9.

An unsigned integer

ErrorString

A text string message that is displayed to the user. This message corresponds to the FailCode.

An unsigned integer

FailSeqNum

Tracks multiple failure attempts for the same meeting.

An unsigned integer

UniqueConfNum

Unique conference number assigned to this meeting after it was successfully scheduled. This is 0 for meetings that are not scheduled successfully.

An unsigned integer


Table 9 Failure Code Reference: Scheduling Failures Information 

Field
Description

5122

Generic code for any error found from internal reservation mechanism.

5129

Original resource reservation cannot be found.

5154

The server cannot commit the extensions because of a failure to save the extension record to the database.

5155

Server did not extend meeting because of one of these reasons:

Less than two participants were in the voice and web sessions.

The meeting was extended to more than 24 hours.

The Extend Meeting parameter was set to 0 minutes.

5190

The Meeting ID conflicts with an existing meeting.

5209

The meeting was terminated.

5291

There were not enough video resources.

5295

Not enough ports are available.

5318

The meeting could not be scheduled because the recording would have been too long.

131158

One person remains in the meeting.

131159

Meeting was extended more than 24 hours.

131262

Failed to extend because of meeting ID conflict.

131198

Failed to extend because of lack of voice ports.

131199

Failed to extend because of lack of recording space.


Related Topics

Exporting Data from Cisco Unified MeetingPlace and Running Reports module

Scheduling Statistics Information—Raw Data Export Specifications

Table 10 Export Data Specifications—Scheduling Statistics Information 

Header Field
Description
Size and Type of Value

fNumSchedSuccesses

Number of scheduling operations that were successful.

For example, suppose that a user successfully schedules a recurring meeting with 100 instances from the Cisco Unified MeetingPlace web user portal. This would add 1 to fNumSchedSuccesses and 100 to fNumSchedWeb.

Up to 16 numeric integers

fNumSchedWindows

Number of meetings scheduled from Microsoft Windows computers.

Up to 16 numeric integers

fNumSchedMac

Number of meetings scheduled from Macintosh computers.

Up to 16 numeric integers

fNumSchedNotes

Number of meeting scheduled from IBM Lotus Notes.

Up to 16 numeric integers

fNumSchedVUI

Number of meetings scheduled from the TUI.

Up to 16 numeric integers

fNumSchedWeb

Number of meetings scheduled from the Cisco Unified MeetingPlace web user portal.

Up to 16 numeric integers

fSumSchedClients

Total number of meetings that were successfully scheduled, specifically, the sum of these values: fNumSchedWindows, fNumSchedMac, fNumSchedNotes, fNumSchedVUI, and fNumSchedWeb.

Up to 16 numeric integers


Related Topics

Exporting Data from Cisco Unified MeetingPlace and Running Reports module

Scheduling Activity By User Information—Raw Data Export Specifications

Table 11 Export Data Specifications—Scheduling Activity By User Information 

Header Field
Description
Size and Type of Value

dialableConfId

Meeting ID.

0 to 9 ASCII text characters

confname

Meeting subject.

0 to 63 alphanumeric characters

schedulerName

First name and Last name of the meeting scheduler.

0 to 64 alphanumeric characters

dateScheduled

Date when the user scheduled the meeting.

MM/DD/YYYY

timeScheduled

Time when the user scheduled the meeting.

hh:mm

conflength

Requested number of minutes for this meeting.

Numeric

nPortsRequired

Number of voice ports required for this meeting.

Numeric

groupIdNumber

Number of user group to which this user belongs.

1 to 17 alphanumeric characters

groupName

Name of user group to which this user belongs.

1 to 17 alphanumeric characters

userID

Username of this user.

1 to 30 alphanumeric characters

videoPortsReserved

Whether video ports were reserved for each meeting,

Yes/No


Related Topics

Exporting Data from Cisco Unified MeetingPlace and Running Reports module

Continuous Meetings Information—Raw Data Export Specifications

Table 12 Export Data Specifications—Continuous Meetings Information 

Header Field
Description
Size and Type of Value

confnum

Unique conference number assigned to this meeting after it was successfully scheduled.

1 to 9 numeric characters

DialableConfID

Meeting ID.

0 to 9 ASCII text characters

ConfName

Meeting subject.

0 to 63 alphanumeric characters

organizerName

First name and Last name of the meeting owner.

0 to 64 alphanumeric characters

contactName

Username of delegate that is assigned to the meeting owner.

1 to 30 alphanumeric characters

billCode

See Billing code.

0 to 17 alphanumeric characters

meetingType

See MeetingType.

Numeric—range is 0 to 4

startdatesched

Date on which the meeting is scheduled to begin.

MM/DD/YYYY

starttimesched

Time at which the meeting is scheduled to begin.

hh:mm

actnParticipants

The number of users who have attended this meeting.

Any numeric value

actlenofconf

Total number of seconds for which the continuous meeting had at least one participant.

1 to 9 numeric characters

recmins

Not supported.

peaknparticipants

Peak number of participants in this meeting.

Any numeric value

nUserVUIMtgNotesAccesses

Number of times that the meeting recordings and attachments have been accessed from the TUI.

Any numeric value

nGuestMtgNotesAccesses

Number of times that the meeting recordings and attachments have been accessed by guest users.

Any numeric value

nUserGUIMtgNotesAccesses

Number of times that the meeting recordings and attachments have been accessed from the Cisco Unified MeetingPlace web user portal.

Any numeric value

fconfportmins

Number of voice ports per minute used by the meeting.

Any numeric value

fdcconfportmins

Number of web ports per minute used by the meeting.

Any numeric value

schedulerLastName

Last name of the meeting scheduler.

0 to 32 alphanumeric characters


Related Topics

Exporting Data from Cisco Unified MeetingPlace and Running Reports module