Configuration and Maintenance Guide for MeetingPlace 7.1
Integrating With Cisco Unified IP Phone
Downloads: This chapterpdf (PDF - 145.0KB) The complete bookPDF (PDF - 5.46MB) | Feedback

Integrating Cisco Unified MeetingPlace With Cisco Unified IP Phone

Table Of Contents

Integrating Cisco Unified MeetingPlace With Cisco Unified IP Phone

About Cisco Unified MeetingPlace PhoneView

Cisco Unified MeetingPlace PhoneView and Security

Username and Password Requirements for Cisco Unified MeetingPlace PhoneView

Language Requirements for Cisco Unified MeetingPlace PhoneView

Additional References for Configuring Cisco Unified MeetingPlace PhoneView

How to Configure Cisco Unified MeetingPlace PhoneView

Adding Cisco Unified MeetingPlace to the List of IP Phone Services on the Cisco Unified Communications Manager

Defining Cisco Unified MeetingPlace Service Parameters

Finding an IP Phone Service in Cisco Unified Communications Manager

Deleting an IP Phone Service


Integrating Cisco Unified MeetingPlace With Cisco Unified IP Phone


Release 7.1
Revised: April 3, 2011 8:30 pm

You can integrate Cisco Unified MeetingPlace with Cisco Unified IP phones so that users can see and manage their meetings on their phones through an application called Cisco Unified MeetingPlace PhoneView. This module describes how to configure the PhoneView service.

About Cisco Unified MeetingPlace PhoneView

How to Configure Cisco Unified MeetingPlace PhoneView

Finding an IP Phone Service in Cisco Unified Communications Manager

Deleting an IP Phone Service


Note Cisco Unified MeetingPlace PhoneView is a Cisco Unified Communications Manager feature. However, this module does not describe how to install or configure Cisco Unified Communications Manager (formerly known as Cisco Unified CallManager) for your network. For additional information, see the list of documents in the "Additional References for Configuring Cisco Unified MeetingPlace PhoneView" section.

For a list of supported phone models, see the System Requirements and Compatibility Matrix for Cisco Unified MeetingPlace.


About Cisco Unified MeetingPlace PhoneView

Cisco Unified MeetingPlace PhoneView offers users a convenient way to join meetings, start reservationless meetings, view a list of upcoming meetings, and view meeting details. After joining a meeting, a user can perform in-meeting operations such as locking the meeting, recording the meeting, viewing a list of participants, and muting or ejecting participants.


Note Cisco Unified MeetingPlace PhoneView is available only to Cisco Unified IP Phones that are registered to Cisco Unified Communications Manager. Cisco Unified Communications Manager Express does not support Cisco Unified MeetingPlace PhoneView.


Cisco Unified MeetingPlace PhoneView and Security

Username and Password Requirements for Cisco Unified MeetingPlace PhoneView

Language Requirements for Cisco Unified MeetingPlace PhoneView

Additional References for Configuring Cisco Unified MeetingPlace PhoneView

Cisco Unified MeetingPlace PhoneView and Security

Using Cisco Unified MeetingPlace PhoneView may affect the way you secure your Cisco Unified MeetingPlace system or network:

Cisco Unified IP Phones do not support SSL.

Once a Cisco Unified IP Phone is subscribed to PhoneView, anyone can use that Cisco Unified IP Phone screen to view the meeting details and invitees of published meetings. To join a meeting through PhoneView, however, you are always prompted for your phone profile password (numeric PIN).

Each time a Cisco Unified IP Phone accesses PhoneView, the following items are sent as clear text over the network:

Username

PIN or password

Phone number of the Cisco Unified IP Phone

Related Topics

Username and Password Requirements for Cisco Unified MeetingPlace PhoneView

About Cisco Unified MeetingPlace PhoneView

Username and Password Requirements for Cisco Unified MeetingPlace PhoneView

The username and password required to subscribe to Cisco Unified MeetingPlace PhoneView depends on how the user is authenticated when logging in to Cisco Unified MeetingPlace from a workstation.

Cisco Unified MeetingPlace Authentication Method
Required Username for name Parameter
Required Password for wfpassword Parameter

Locally by the Cisco Unified MeetingPlace database

User ID in Cisco Unified MeetingPlace user profile

Profile password in Cisco Unified MeetingPlace user profile

Externally by Cisco Unified Communications Manager

Username in Cisco Unified Communications Manager

Numeric PIN in Cisco Unified Communications Manager

Externally by Active Directory, Netscape Directory, or iPlanet Directory

Username in external directory

Numeric PIN in external directory


Related Topics

About Cisco Unified MeetingPlace PhoneView

Language Requirements for Cisco Unified MeetingPlace PhoneView

The requirements in this section apply when Cisco Unified MeetingPlace, Cisco Unified Communications Manager, or the Cisco Unified IP Phones are configured for multiple locales, which are language versions for specific regions.

For each language enabled on Cisco Unified MeetingPlace, the matching locale must be installed on Cisco Unified Communications Manager. See the Cisco IP Telephony Locale Installer documentation.

For each Cisco Unified IP Phone subscribed to Cisco Unified MeetingPlace PhoneView, the user locale specified in Cisco Unified Communications Manager must match the language specified in the Cisco Unified MeetingPlace user profile.

Related Topics

About Cisco Unified MeetingPlace PhoneView

Additional References for Configuring Cisco Unified MeetingPlace PhoneView

Additional References for Configuring Cisco Unified MeetingPlace PhoneView

Cisco Unified Communications Manager documentation

http://www.cisco.com/en/US/products/sw/voicesw/ps556/tsd_products_support_series_home.html

Cisco Unified IP Phone end-user documentation

http://www.cisco.com/en/US/products/hw/phones/ps379/products_user_guide_list.html

Quick Start Guide: Using Cisco Unified MeetingPlace Release 7.1 with your Cisco Unified IP Phone

http://www.cisco.com/en/US/products/sw/ps5664/ps5669/products_user_guide_list.html

Related Topics

About Cisco Unified MeetingPlace PhoneView

How to Configure Cisco Unified MeetingPlace PhoneView

This topic describes how to configure Cisco Unified Communications Manager to enable users to subscribe to and access Cisco Unified MeetingPlace PhoneView. Complete the following procedures in the order shown.

Adding Cisco Unified MeetingPlace to the List of IP Phone Services on the Cisco Unified Communications Manager

Defining Cisco Unified MeetingPlace Service Parameters

Adding Cisco Unified MeetingPlace to the List of IP Phone Services on the Cisco Unified Communications Manager

Before You Begin

Read the following sections:

Cisco Unified MeetingPlace PhoneView and Security

Username and Password Requirements for Cisco Unified MeetingPlace PhoneView

Language Requirements for Cisco Unified MeetingPlace PhoneView

Configure Cisco Unified Communications Manager as the call-control device for Cisco Unified MeetingPlace.

See the Integrating Cisco Unified MeetingPlace with Cisco Unified Communications Manager module for instructions.

For the services to be available, the phones in the Cisco Unified Communications Manager cluster must have network connectivity to this server.

Restrictions

Cisco Unified IP Phones do not support SSL.

Cisco Unified MeetingPlace PhoneView is available only to Cisco Unified IP Phones that are registered to Cisco Unified Communications Manager.

This task is performed in the Cisco Unified Communications Manager pages. Because the pages and menus vary by Cisco Unified Communications Manager release, you may need to see the Cisco Unified Communications Manager online help for more accurate step-by-step instructions than those provided in this procedure. The following procedure refers to Cisco Unified Communications Manager Release 6.1.


Note The names for Cisco Unified Communications Manager Release 4.3, Release 5.1, and Release 6.0 have been changed to Cisco Unified Communications Manager Release 4.3, Release 5.1, and Release 6.0. The names of Cisco Unified Communications Manager Release 4.0, Release 4.1, Release 4.2, and Release 5.0 have not changed and remain the same.


Procedure


Step 1 Go to http://ccm-server/ccmadmin/main.asp, where ccm-server is the fully qualified domain name or IP address of the Cisco Unified Communications Manager server.

Step 2 Log in with your Cisco Unified Communications Manager administrator username and password.

Step 3 Click Device > Device Settings > Phone Services.

Step 4 Click Add New in the top left corner.

Step 5 Configure the fields in the Service Information area.

For This Field
Do This

Service Name

Enter a name, for example: Cisco Unified MeetingPlace

This is the name of the service that appears on the Cisco Unified IP Phone and on the menu of available services on user subscription pages.

If you have more than one Cisco Unified MeetingPlace Web Server, name the services appropriately so that users can distinguish among them.

Service Description

Enter a brief description of what the service provides, for example: Integrated rich-media conferencing

ASCII Service Name

Enter a name, for example: Cisco Unified MeetingPlace.

You may also enter a brief ASCII version such as CUMP.

Service URL

Enter the URL in the following format, where application-server is the hostname or IP address of the Cisco Unified MeetingPlace Application Server:

http://application-server/ipphone/MPAPI/ipphone/login?serverhost=application-server

The URL identifies where the Cisco Unified MeetingPlace PhoneView application is located.

Note The URL is case sensitive.

Requirements:

For this service to be available, the phones in the Cisco Unified Communications Manager cluster must have network connectivity to the Application Server.

In an Application Server Failover deployment, use the shared hostname or IP address that you configured on the eth0 interface of both Application Servers.

If you use the hostname (instead of the IP address) in the URL, then configure your DNS server to resolve the Application Server hostname from the Cisco Unified IP Phone.


Step 6 Click Save.

Step 7 (Optional) Click Add New to add another Cisco Unified MeetingPlace IP Phone service and repeat Step 5 and Step 6.


What to Do Next

Proceed to the "Defining Cisco Unified MeetingPlace Service Parameters" section.

Defining Cisco Unified MeetingPlace Service Parameters

This procedure enables users to be authenticated when they subscribe to the Cisco Unified MeetingPlace service on the Cisco Unified IP Phone User Options (ccmuser) website. It also allows users to access the Cisco Unified MeetingPlace service from their Cisco Unified IP Phones.

Before you Begin

Complete the "Adding Cisco Unified MeetingPlace to the List of IP Phone Services on the Cisco Unified Communications Manager" section.

This procedure assumes that you are still logged in to the Cisco Unified Communications Manager server and on the IP Phone Services Configuration page.

Procedure


Step 1 Locate the Service Parameter Information area.

Step 2 Configure the ipphone parameter.

a. Click New.

b. Configure the following fields in the Configure Cisco IP Phone Service Parameter window.

For This Field
Do This

Parameter Name

Enter ipphone.

This is the exact query string used to build the subscription URL.

This field is case-sensitive.

Parameter Display Name

Enter Cisco Unified IP Phone Number.

This is the descriptive parameter name displayed to the user on the Cisco IP Phone Users Options [ccmuser] website.

Default Value

Leave blank.

Parameter Description

Enter The Cisco Unified IP Phone number that MeetingPlace will use to call you.


c. Check Parameter is Required.

d. Click Save And Close.

Step 3 Configure the name parameter.

a. Click New in the Service Parameter Information area.

b. Configure the following fields in the Configure Cisco IP Phone Service Parameter window.

For This Field
Do This

Parameter Name

Enter name.

This is the exact query string used to build the subscription URL.

This field is case-sensitive.

Parameter Display Name

Enter User Name.

This is the descriptive parameter name displayed to the user on the Cisco IP Phone Users Options [ccmuser] website.

Parameter Default Value

Enter guest.

Parameter Description

Enter a description that will help users to enter the correct username when they subscribe to Cisco Unified MeetingPlace PhoneView.

Note The username required depends on how the user is authenticated when logging into Cisco Unified MeetingPlace from a workstation.


c. Check Parameter is Required.

d. Click Save And Close.

Step 4 Configure the wfpassword parameter.

a. Click New in the Service Parameter Information area.

b. Configure the following fields in the Configure Cisco IP Phone Service Parameter window.

For This Field
Do This

Parameter Name

Enter wfpassword.

This is the exact query string used to build the subscription URL.

This field is case-sensitive.

Parameter Display Name

Enter User PIN.

This is the descriptive parameter name displayed to the user on the Cisco IP Phone Users Options [ccmuser] website.

Default Value

Leave blank.

Parameter Description

Enter a description that will help users to enter the correct password when they subscribe to Cisco Unified MeetingPlace PhoneView.

Note The password required depends on how the user is authenticated when logging into Cisco Unified MeetingPlace from a workstation.


c. Check Parameter is Required.

d. Check Parameter is a Password (mask contents) to mask the password on the screen as the user enters it.

e. Click Save And Close.

Step 5 Take one of the following actions to apply the Cisco Unified MeetingPlace service and parameter changes:

If the service was modified after subscriptions existed, click Update Subscriptions to rebuild all user subscriptions. You must update subscriptions if you changed the service URL, removed a phone service parameter, or changed the name for a phone service parameter.

If the service is new and you do not need to rebuild user subscriptions, click Update.


Related Topics

How to Configure Cisco Unified MeetingPlace PhoneView

Username and Password Requirements for Cisco Unified MeetingPlace PhoneView

What to Do Next

Subscribe Cisco Unified IP Phones to Cisco Unified MeetingPlace PhoneView by taking one or both of the following actions:

Subscribe individual Cisco Unified IP Phones to Cisco Unified MeetingPlace PhoneView through Cisco Unified Communications Manager. See the Cisco Unified Communications Manager Administration Guide for instructions.

Notify end users that they can subscribe their own Cisco Unified IP Phones to Cisco Unified MeetingPlace PhoneView. See the User Guide for Cisco Unified MeetingPlace Release 7.1.

Finding an IP Phone Service in Cisco Unified Communications Manager

Procedure


Step 1 Go to http://ccm-server/ccmadmin/main.asp, where ccm-server is the fully qualified domain name or IP address of the Cisco Unified Communications Manager server.

Step 2 Log in with your Cisco Unified Communications Manager administrator username and password.

Step 3 Click Device > Device Settings > Phone Services.

Step 4 Enter a search parameter then click Find.

Step 5 Locate your application in the search results area.

Step 6 Click the name of the IP Phone Service that you want to see.


Related Topics

How to Configure Cisco Unified MeetingPlace PhoneView

Deleting an IP Phone Service

Deleting an IP Phone Service

Procedure


Step 1 Find the IP Phone Service that you want to delete.

Step 2 Check the checkbox next to the phone service name.

Step 3 Click Delete Selected.


Related Topics

Finding an IP Phone Service in Cisco Unified Communications Manager