Configuration and Maintenance Guide for MeetingPlace 7.1
Configuring Flex Fields
Downloads: This chapterpdf (PDF - 81.0 KB) The complete bookPDF (PDF - 5.46 MB) | Feedback

Configuring Flex Fields for Cisco Unified MeetingPlace

Table Of Contents

Configuring Flex Fields for Cisco Unified MeetingPlace

Configuring Flex Fields for Cisco Unified MeetingPlace

Release 7.1
Revised: April 3, 2011 8:31 pm

You can define custom fields for meetings, user profiles, and user groups. Use these flex fields to track site- or organization-specific information by meeting or user.

You can set the Protection level to control which flex fields appear in or can be modified from the end-user web interface.

Table 1 Default Flex Field Values 

Type of Flex Field
Default Value of Flex Field






Jan 01 1970




Flex fields are not included in exported output.

Flex fields cannot be imported.

If you modify the Type of an existing flex field, then the flex field value in existing user groups, user profiles, and meeting records that contain that flex field will be replaced by the default value applicable to the newly specified Type. See Table 1.


Step 1 Log in to the Administration Center.

Step 2 Select System Configuration > Flex Fields Configuration.

Step 3 Select one of the flex field entries.

Step 4 Configure the fields on the Edit Flex Fields Page.

Step 5 Select Save.

Related Topics

Field Reference: Edit Flex Fields Page in the Administration Center Page References for Cisco Unified MeetingPlace module

Configuring the Cisco Unified MeetingPlace Web Conferencing User Interface module

Customizing the Cisco Unified MeetingPlace Scheduling Form for Microsoft Outlook in the Enabling Cisco Unified MeetingPlace Scheduling from Microsoft Outlook module