Configuration and Maintenance Guide for MeetingPlace 7.1
Configuring Attendant Settings
Downloads: This chapterpdf (PDF - 78.0KB) The complete bookPDF (PDF - 5.46MB) | Feedback

Configuring Attendant Settings for Cisco Unified MeetingPlace

Table Of Contents

Configuring Attendant Settings for Cisco Unified MeetingPlace

Configuring Attendant Privileges

Configuring Operator Assistance


Configuring Attendant Settings for Cisco Unified MeetingPlace


Release 7.1
Revised: April 3, 2011 8:30 pm

Configuring Attendant Privileges

Configuring Operator Assistance

Configuring Attendant Privileges

You can configure which Administration Center and MeetingPlace Conference Manager capabilities are available to users of type Attendant.

Procedure


Step 1 Log in to the Administration Center.

Step 2 Select System Configuration > Usage Configuration.

Step 3 Configure the Attendant Privileges fields.

Step 4 Select Save.


Related Topics

Field Reference: Usage Configuration Page in the Administration Center Page References for Cisco Unified MeetingPlace module

About User Types in the Administration Center Page References for Cisco Unified MeetingPlace module

Using MeetingPlace Conference Manager module

Configuring Operator Assistance

Cisco Unified MeetingPlace can be configured to forward calls to the help desk Attendant in the following situations:

A caller dials 0 for operator assistance.

A caller does not enter a number at a voice prompt.

Procedure


Step 1 Log in to the Administration Center.

Step 2 Select System Configuration > Usage Configuration.

Step 3 Configure the following fields:

Attendant phone—Enter the help desk or attendant phone number.

Dial attendant on timeout—Set this field to Yes.

Step 4 Select Save.


Related Topics

Field Reference: Usage Configuration Page in the Administration Center Page References for Cisco Unified MeetingPlace module

Configuring Call Control for Cisco Unified MeetingPlace module