Cisco Jabber for Windows 9.0.1 Release Notes
Important Considerations
Downloads: This chapterpdf (PDF - 1.13MB) The complete bookPDF (PDF - 1.88MB) | Feedback

Important Considerations

Important Considerations

DTMF Digits in Log Files

When users enter DTMF digits in Cisco Jabber, the client writes those digits to a log file in plain text.

Important:

Problem reports, or PRTs, that users submit contain the log files with DTMF digits. Cisco treats all log files with the strictest confidentiality and deletes all log files when no longer required to investigate product issues.

This issue is resolved in version 9.0.6 with defect number CSCug51731.

Video Desktop Sharing Considerations


Note


Video desktop sharing refers to desktop sharing functionality on CSF devices on Cisco Unified Communications Manager that are BFCP-enabled.


  • As of this release, Cisco Jabber for Windows supports video desktop sharing in software phone mode only. Video desktop sharing is not available in desk phone mode.
  • Migration of your video desktop sharing configuration is not possible. If you configure video desktop sharing on Cisco Unified Communications Manager 8.6.1 and then upgrade to Cisco Unified Communications Manager 8.6.2, you must configure video desktop sharing on Cisco Unified Communications Manager 8.6.2.
  • You should not attempt to enable video desktop sharing, or BFCP, on a device or client that does not support BFCP. For example, you should not attempt to enable video desktop sharing on a Cisco Jabber for Mac CSF device.
  • If Cisco Jabber for Windows cannot resolve contacts by their phone numbers, video desktop sharing is available from the active call window only, not the chat window. To prevent this issue, you should ensure that user phone numbers in your directory are correct.
  • In a hybrid cloud-based deployment, Cisco WebEx Connect provides instant messaging capabilities and Cisco Unified Communications Manager provides audio and video communication capabilities. However, both Cisco WebEx Connect and Cisco Unified Communications Manager provide desktop sharing functionality.
    Video desktop sharing functionality is provided as follows:
    • If users initiate desktop sharing sessions in instant messaging conversations, Cisco WebEx Connect provides desktop sharing functionality.
    • If users initiate desktop sharing sessions during an audio or video conversation, they use the video desktop sharing capabilities on Cisco Unified Communications Manager.

Multiple Devices and Clients Configuration

  • If you run two clients that use the same CSF device, contention occurs for that CSF device. This contention can result in dropped calls, busy tones, or other unpredictable behavior
  • In some instances, Cisco Jabber for Windows users might be disconnected if they have both a CSF device and TNT device such as Cisco Jabber for iPhone configured on Cisco Unified Communications Manager.
  • Unexpected behavior is likely to occur if you run both the Cisco WebEx Connect client and the Cisco Jabber for Windows client on the same computer. This combination of the Cisco WebEx Connect client and the Cisco Jabber for Windows client on the same computer is not supported.

Audio Device Configuration on Microsoft Windows

As a general rule, you should do one of the following to configure audio devices in Microsoft Windows:
  • Set the correct device as your default communications device. For example, set your external headset as your default communications device, not speakers built into your computer.
  • Select Do nothing on the Communications tab on the Sound window in Microsoft Windows. Selecting this setting ensures that Microsoft Windows does not attempt to adjust the sound volume during audio or video calls.
    You can also apply this setting through the Microsoft Windows registry with the following steps:
    1. Open a command line window.
    2. Run the following command:
      reg add HKCU\Software\Microsoft\Multimedia\Audio /v UserDuckingPreference /t REG_DWORD /d 0x3 /f
If you do not correctly configure your audio devices on Microsoft Windows, you might experience unexpected behavior or difficulty receiving audio with your device. See the appropriate Microsoft Windows documentation for more information on configuring audio devices.

Options Configuration in Cisco Jabber for Windows

  • Users should specify device selection in the Advanced section on the Audio and Video tabs on the Options window. If users do not specify device selection in the Advanced section, Cisco Jabber for Windows resets the device selection each time it restarts.
  • The Video and Calls tabs are not available on the Options window if:
    • Users select the Use my phone for calls option.
    • Users do not add their credentials on the Phone accounts tab on the Options window.

Credentials

  • Cisco Jabber for Windows deletes phone credentials when different primary users sign in, or attempt to sign in, to the same instance of the client. Even if a different primary enters credentials to sign in but does not sign in successfully, the client deletes any existing phone credentials. The following steps are an example of this functionality:
    1. User A signs in to Cisco Jabber for Windows.
    2. User A selects File > Options > Phone accounts and specifies phone credentials.
    3. User A signs out of Cisco Jabber for Windows.
    4. User B signs in to the same instance of Cisco Jabber for Windows.
    5. Cisco Jabber for Windows deletes the phone credentials that user A specified.
  • The potential to lock Microsoft Active Directory credentials exists because Cisco Unified Communications Manager synchronizes directory credentials with user phone service credentials and voice mail credentials. You should ensure any changes to credentials occur for all instances where users enter synchronized credentials.
    For example, you change a user's Active Directory account password. Cisco Unified Communications Manager synchronizes this password with the phone service password. You should notify the user to update their password in Cisco Jabber for Windows as follows:
    1. Log in to Cisco Jabber for Windows.
    2. Select File > Options.
    3. Select Phone accounts.
    4. Specify the new password in the Password in the Phone services section.
    5. Select OK.
  • In an on-premises deployment, you can specify a configuration parameter to use the phone service credentials specified on Cisco Unified Communications Manager. See the Phone service credentials configuration parameter topic in the Cisco Jabber for Windows Administration Guide for more information.
  • In a hybrid cloud-based deployment, you can specify a configuration parameter to use the voice mail service credentials specified on Cisco Unity Connection. See the Voice mail service credentials configuration parameter topic in the Cisco Jabber for Windows Administration Guide for more information.

Integration with Microsoft SharePoint

You must use Microsoft Internet Explorer for availability status to be displayed in Microsoft SharePoint. Due to a Microsoft SharePoint limitation, availability status does not display in browsers other than Internet Explorer.

To enable availability status in Microsoft SharePoint, add the Microsoft SharePoint site to the list of trusted sites in Microsoft Internet Explorer.

DNS Configuration

In a Cisco Unified Presence cluster, ensure that the hostname of each node is available to Cisco Jabber for Windows, even if you configure the client to login using an IP address.