Streamlined Medium Branch Network System Assurance Guide
Troubleshooting
Downloads: This chapterpdf (PDF - 168.0KB) The complete bookPDF (PDF - 10.3MB) | Feedback

Troubleshooting

Table Of Contents

Troubleshooting

Contents

Baseline Troubleshooting Commands

Voice Troubleshooting Commands

Cisco WAAS Troubleshooting Commands


Troubleshooting


Revised: December 21, 2009

This chapter describes the debug commands you can use to troubleshoot your configuration.

The OIT Output Interpreter Tool (registered customers only) supports certain show commands. Use the OIT to view an analysis of show command output.


Note See the Important Information on Debug Commands before you use debug commands.


See the Cisco IOS Debug Command Reference for more information.

Contents

Baseline Troubleshooting Commands

Voice Troubleshooting Commands

Cisco WAAS Troubleshooting Commands

Baseline Troubleshooting Commands

debug aaa authentication

debug bgp all events

debug crypto gdoi

debug crypto isakmp

debug frame-relay events

debug frame-relay lmi

debug frame-relay packet

debug h225 events

debug ip inspect detailed

debug ip inspect policy detailed

debug ip ips category

debug ip ips detailed

debug ip ips function-trace

debug ip ips idconf

debug ppp multilink data

debug ppp multilink events

debug radius authentication

debug qos cce

debug qos events

debug qos stats

Voice Troubleshooting Commands

debug ephone detail

debug sccp errors

debug sccp events

debug sccp keepalive

debug sccp packets

debug voice ccapi inout

debug voice confmsp

debug voice dsmp

debug voice xcodemsp

debug voip dialpeer

Cisco WAAS Troubleshooting Commands

debug wccp events

debug wccp error