Yes at the
Time Protocol Client Configuration screen.
Network Time Protocol Client Configuration screen
||Enter the IP
address, NTP server name, or NTP Server Pool name for at least one external NTP
You can add up
to five NTP servers and make changes to the NTP server list at a later time.
||You should use a
minimum of three external NTP servers.
complete the NTP configuration, select
Configuration screen opens.
- Enter the
Database Access Security password. This is the password that servers in the
cluster use to communicate with each another.
must enter the same security password for all servers.
OK to open the SMTP Host Configuration screen.
Host Configuration screen, select whether you want to configure an
SMTP host to receive platform-level emails, for example, emails about
certificate expiration. This field is optional. You will configure email for
report scheduling in the Administration console.
want to configure an SMTP Host.
Yes to open the second SMTP screen opens.
Proceed to Step 6.
not want to configure an SMTP Host.
No to open the Application User Configuration
Proceed to Step 7.
||In the second
Host Configuration screen:
- Enter the
hostname or IP address for the SMTP server.
OK to open the Application User Configuration screen.
Application User Configuration
screen. The application user for the Controller becomes
the System Application User and the default Super User.
||Although it is possible to enter
unique Application User credentials on each installed node, you should enter the
same Application User Name and password on all nodes.
The Application User credentials entered during the Controller installation are
the only ones recognized by Unified Intelligence Center.
- Enter the
- Enter and
confirm the application user password.
OK to open the Platform Configuration Confirmation screen. This
screen states that the platform configuration is complete.
Platform Configuration Confirmation screen, select
installing over a Virtual Machine, the system will display the following
|Figure 1. Virtual
Machine Install Screen
Yes and click
OK to continue installation. The system displays the
system will reboot momentarily to continue with the installation.
reboot, the system will automatically proceed with the installation.