Configuration Guide for Cisco Unified Customer Voice Portal, Release 10.0(1)
Speech Server Configuration
Downloads: This chapterpdf (PDF - 1.1MB) The complete bookPDF (PDF - 6.6MB) | The complete bookePub (ePub - 2.18MB) | Feedback

Speech Server Configuration

Speech Server Configuration

Configure Speech Server

Before You Begin

Install the Remote Operations in the Speech Server before you add the Speech Server to the Operations console.

Procedure
    Step 1   From the Operations Console, select Device Management > Speech Server.
    Step 2   Click Add New to add a new Speech Server or click Use As Template to use an existing template to configure the new Speech Server.
    Step 3   Click the following tabs and configure the settings based on your call flow model:
    1. General tab. For more information, see General Settings.
    2. Device Pool tab. Add the Speech Server to a device pool by moving the device pool from Available pane to the Selected pane. For more information about adding, deleting, and editing device pool, see Add or Remove Device From Device Pool.
    Step 4   Click Save to save the settings in the Operations Server database. Click Save and Deploy to deploy the changes to the Speech Server page later.

    Speech Server Settings

    General Settings

    Table 1 Speech Server—General Settings

    Field

    Description

    Default

    Value

    Reboot/Restart Required

    IP Address

    The IP address of the Speech Server.

    None

    Valid IP address

    Yes - Reboot Speech Server

    Hostname

    The host name of the Speech Server.

    None

    Valid DNS name, includes letters, the numbers 0 through 9, and a dash

    Yes - Reboot Speech Server

    Description

    The description of the Speech Server.

    None

    Up to 1024 characters

    No

    License File Location

    The path of the license file on the Speech Server. The Operations Console transfers the license file to this location.

    Note    The license file is the license file for the respective Speech Server. The location must be the path to where the license file exists on the Speech Server. The license file must exist at that path before you can successfully save and deploy.

    None

    Any text

    Yes - Restart

    Enable secure communication with the Ops console

    Select On to enable secure communications between the Operations Server and this component. Access the device using SSH and files are transferred using HTTPS.

    None

    On or Off

    No