GUI Administration Guide for Cisco Unified SIP Proxy Release 8.5
Configuring Network Time and Time Zone Settings
Downloads: This chapterpdf (PDF - 46.0KB) The complete bookPDF (PDF - 2.68MB) | Feedback

Configuring Network Time and Time Zone Settings

Table Of Contents

Configuring Network Time and Time Zone Settings

Adding an NTP Server

Removing an NTP Server

Setting an NTP Server as the Preferred Server

Changing the Time Zone


Configuring Network Time and Time Zone Settings


You must add an NTP server to your Cisco Unified SIP Proxy system and configure the time zone to ensure that voicemails and system processes have the correct date and time associated with them.

Adding an NTP Server

Removing an NTP Server

Setting an NTP Server as the Preferred Server

Changing the Time Zone

Adding an NTP Server

Restriction

You can have a maximum of three NTP servers.

Procedure


Step 1 Choose System > Network Time & Time Zone Settings.

The system displays the Network Time & Time Zone Settings page.

Step 2 Click Add.

The system displays the Add a NTP Server page.

Step 3 Enter the hostname or IP address of the NTP server. To make it the primary NTP server, check the Preferred check box.

Step 4 Click Add.

The system displays the Network Time and Time Zone Settings page with the new server listed in the table.


What To Do Next

Save and then reload the configuration. See Using the Administration Control Panel.

Related Topics

Back to the Configuring Network Time and Time Zone Settings menu page

Removing an NTP Server

Procedure


Step 1 Choose System > Network Time & Time Zone Settings.

The system displays the Network Time & Time Zone Settings page.

Step 2 Check the check box next to the NTP server to remove.

Step 3 Click Delete.

Step 4 Click OK at the prompt.


What To Do Next

Save and then reload the configuration. See Using the Administration Control Panel.

Related Topics

Back to the Configuring Network Time and Time Zone Settings menu page

Setting an NTP Server as the Preferred Server

Restriction

You must have at least two NTP servers.

Procedure


Step 1 Choose System > Network Time & Time Zone Settings.

The system displays the Network Time & Time Zone Settings page.

Step 2 Check the check box next to the NTP server to set as the preferred server.

Step 3 Click Preferred.

Step 4 Click OK.


What To Do Next

Save and then reload the configuration. See Using the Administration Control Panel.

Related Topics

Back to the Configuring Network Time and Time Zone Settings menu page

Changing the Time Zone

Procedure


Step 1 Choose System > Network Time & Time Zone Settings.

The system displays the Network Time & Time Zone Settings page.

Step 2 Use the drop-down menu to select the correct country.

Step 3 Use the drop-down menu to select the correct time zone.

Step 4 Click Apply.

Step 5 Click OK at the information prompt.


What To Do Next

Save and then reload the configuration. See Using the Administration Control Panel.

Related Topics

Back to the Configuring Network Time and Time Zone Settings menu page